2016-07-21T16:39:25.081Z,1469119165.081 [Supervisor](DEBUG): Initializing supervisor.
2016-07-21T16:39:25.084Z,1469119165.084 [SyncHandler](DEBUG): Created PCaller Thread at 4051A4E0
2016-07-21T16:39:25.085Z,1469119165.085 [SyncHandler](INFO): Protected caller Thread ID is 763
2016-07-21T16:39:25.085Z,1469119165.085 [ComponentRegistry](DEBUG): Component "controlThread" handled in its own thread.
2016-07-21T16:39:25.086Z,1469119165.086 [controlThread ThreadHandler](DEBUG): Created PCaller Thread at 4054A4E0
2016-07-21T16:39:25.087Z,1469119165.087 [controlThread ThreadHandler](INFO): Protected caller Thread ID is 764
2016-07-21T16:39:25.089Z,1469119165.089 [ComponentRegistry](DEBUG): SyncComponent "CycleStarter" handled in the control thread.
2016-07-21T16:39:25.101Z,1469119165.101 [ComponentRegistry](DEBUG): Component "CommandLine" handled in its own thread.
2016-07-21T16:39:25.102Z,1469119165.102 [CommandLine ThreadHandler](DEBUG): Created PCaller Thread at 4057A4E0
2016-07-21T16:39:25.102Z,1469119165.102 [CommandLine ThreadHandler](INFO): Protected caller Thread ID is 765
2016-07-21T16:39:25.103Z,1469119165.103 [ComponentRegistry](DEBUG): Component "logger" handled in its own thread.
2016-07-21T16:39:25.104Z,1469119165.104 [logger ThreadHandler](DEBUG): Created PCaller Thread at 405AA4E0
2016-07-21T16:39:25.105Z,1469119165.105 [logger ThreadHandler](INFO): Protected caller Thread ID is 766
2016-07-21T16:39:25.107Z,1469119165.107 [ComponentRegistry](DEBUG): SyncComponent "LogSplitter" handled in the control thread.
2016-07-21T16:39:25.107Z,1469119165.107 [Supervisor](INFO): Looking for Config files in directory: Config/
2016-07-21T16:39:25.111Z,1469119165.111 [Supervisor](INFO): Opening Config file at: Config/BIT.cfg
2016-07-21T16:39:25.289Z,1469119165.289 [ComponentRegistry](DEBUG): Loaded Config Component "Config/BIT
2016-07-21T16:39:25.291Z,1469119165.291 [Supervisor](INFO): Opening Config file at: Config/Derivation.cfg
2016-07-21T16:39:25.418Z,1469119165.418 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Derivation
2016-07-21T16:39:25.418Z,1469119165.418 [Supervisor](INFO): Opening Config file at: Config/Control.cfg
2016-07-21T16:39:25.762Z,1469119165.762 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Control
2016-07-21T16:39:25.763Z,1469119165.763 [Supervisor](INFO): Opening Config file at: Config/Estimation.cfg
2016-07-21T16:39:25.897Z,1469119165.897 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Estimation
2016-07-21T16:39:25.898Z,1469119165.898 [Supervisor](INFO): Opening Config file at: Config/Guidance.cfg
2016-07-21T16:39:25.984Z,1469119165.984 [Supervisor](INFO): Opening Config file at: Config/Navigation.cfg
2016-07-21T16:39:26.178Z,1469119166.178 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Navigation
2016-07-21T16:39:26.179Z,1469119166.179 [Supervisor](INFO): Opening Config file at: Config/Sample.cfg
2016-07-21T16:39:26.266Z,1469119166.266 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sample
2016-07-21T16:39:26.267Z,1469119166.267 [Supervisor](INFO): Opening Config file at: Config/Science.cfg
2016-07-21T16:39:26.556Z,1469119166.556 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Science
2016-07-21T16:39:26.556Z,1469119166.556 [Supervisor](INFO): Opening Config file at: Config/Sensor.cfg
2016-07-21T16:39:26.915Z,1469119166.915 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sensor
2016-07-21T16:39:26.915Z,1469119166.915 [Supervisor](INFO): Opening Config file at: Config/Servo.cfg
2016-07-21T16:39:27.227Z,1469119167.227 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Servo
2016-07-21T16:39:27.228Z,1469119167.228 [Supervisor](INFO): Opening Config file at: Config/Simulator.cfg
2016-07-21T16:39:27.851Z,1469119167.851 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Simulator
2016-07-21T16:39:27.851Z,1469119167.852 [Supervisor](INFO): Opening Config file at: Config/logger.cfg
2016-07-21T16:39:28.068Z,1469119168.068 [ComponentRegistry](DEBUG): Loaded Config Component "Config/logger
2016-07-21T16:39:28.069Z,1469119168.069 [Supervisor](INFO): Opening Config file at: Config/secure.cfg
2016-07-21T16:39:33.556Z,1469119173.556 [ComponentRegistry](DEBUG): Loaded Config Component "Config/secure
2016-07-21T16:39:33.556Z,1469119173.556 [Supervisor](INFO): Opening Config file at: Config/vehicle.cfg
2016-07-21T16:39:34.010Z,1469119174.010 [ComponentRegistry](DEBUG): Loaded Config Component "Config/vehicle
2016-07-21T16:39:34.011Z,1469119174.011 [Supervisor](INFO): Opening Config file at: Config/workSite.cfg
2016-07-21T16:39:34.123Z,1469119174.123 [ComponentRegistry](DEBUG): Loaded Config Component "Config/workSite
2016-07-21T16:39:34.125Z,1469119174.125 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-aku/
2016-07-21T16:39:34.128Z,1469119174.128 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Battery.cfg
2016-07-21T16:39:34.374Z,1469119174.374 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Battery
2016-07-21T16:39:34.375Z,1469119174.375 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/BIT.cfg
2016-07-21T16:39:34.479Z,1469119174.479 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Navigation.cfg
2016-07-21T16:39:34.589Z,1469119174.589 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Control.cfg
2016-07-21T16:39:34.688Z,1469119174.688 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Simulator.cfg
2016-07-21T16:39:34.779Z,1469119174.779 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Science.cfg
2016-07-21T16:39:34.931Z,1469119174.931 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Sensor.cfg
2016-07-21T16:39:35.115Z,1469119175.115 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Servo.cfg
2016-07-21T16:39:35.223Z,1469119175.223 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/logger.cfg
2016-07-21T16:39:35.327Z,1469119175.327 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/secure.cfg
2016-07-21T16:39:35.416Z,1469119175.416 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/vehicle.cfg
2016-07-21T16:39:35.593Z,1469119175.593 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-aku/root/
2016-07-21T16:39:35.593Z,1469119175.593 [Supervisor](FAULT): Ignoring configuration overrides from Data/persisted.cfg
2016-07-21T16:39:35.597Z,1469119175.597 [Module Loader](DEBUG): Loading Module at Modules/BIT.so
2016-07-21T16:39:35.755Z,1469119175.755 [SBIT](DEBUG): Construct Startup Built In Test.
2016-07-21T16:39:35.788Z,1469119175.788 [SBIT] Loaded
2016-07-21T16:39:35.789Z,1469119175.789 [ComponentRegistry](DEBUG): SyncComponent "SBIT" handled in the control thread.
2016-07-21T16:39:35.789Z,1469119175.789 [IBIT](DEBUG): Construct Initiated Built In Test.
2016-07-21T16:39:35.819Z,1469119175.819 [IBIT] Loaded
2016-07-21T16:39:35.820Z,1469119175.819 [ComponentRegistry](DEBUG): SyncComponent "IBIT" handled in the control thread.
2016-07-21T16:39:35.823Z,1469119175.823 [CBIT](DEBUG): Construct Continuous Built In Test.
2016-07-21T16:39:35.980Z,1469119175.980 [CBIT] Loaded
2016-07-21T16:39:35.980Z,1469119175.980 [ComponentRegistry](DEBUG): SyncComponent "CBIT" handled in the control thread.
2016-07-21T16:39:35.981Z,1469119175.981 [Module Loader](DEBUG): Loaded Module: BIT (Contains the BuiltInTest components, such as C Built In Test)
2016-07-21T16:39:35.982Z,1469119175.981 [Module Loader](DEBUG): Loading Module at Modules/Control.so
2016-07-21T16:39:36.053Z,1469119176.053 [VerticalControl](DEBUG): Construct VerticalControl.
2016-07-21T16:39:36.160Z,1469119176.160 [VerticalControl] Loaded
2016-07-21T16:39:36.161Z,1469119176.161 [ComponentRegistry](DEBUG): SyncComponent "VerticalControl" handled in the control thread.
2016-07-21T16:39:36.161Z,1469119176.161 [HorizontalControl](DEBUG): Construct HorizontalControl.
2016-07-21T16:39:36.227Z,1469119176.227 [HorizontalControl] Loaded
2016-07-21T16:39:36.228Z,1469119176.227 [ComponentRegistry](DEBUG): SyncComponent "HorizontalControl" handled in the control thread.
2016-07-21T16:39:36.228Z,1469119176.228 [SpeedControl](DEBUG): Construct SpeedControl.
2016-07-21T16:39:36.234Z,1469119176.234 [SpeedControl] Loaded
2016-07-21T16:39:36.235Z,1469119176.235 [ComponentRegistry](DEBUG): SyncComponent "SpeedControl" handled in the control thread.
2016-07-21T16:39:36.235Z,1469119176.235 [LoopControl](DEBUG): Construct LoopControl.
2016-07-21T16:39:36.236Z,1469119176.236 [LoopControl] Loaded
2016-07-21T16:39:36.236Z,1469119176.236 [ComponentRegistry](DEBUG): SyncComponent "LoopControl" handled in the control thread.
2016-07-21T16:39:36.237Z,1469119176.237 [Module Loader](DEBUG): Loaded Module: Control (Contains the Control components, such as Depth, Heading, and Speed Control)
2016-07-21T16:39:36.237Z,1469119176.237 [Module Loader](DEBUG): Loading Module at Modules/Derivation.so
2016-07-21T16:39:36.277Z,1469119176.277 [DepthRateCalculator] Loaded
2016-07-21T16:39:36.277Z,1469119176.277 [ComponentRegistry](DEBUG): SyncComponent "DepthRateCalculator" handled in the control thread.
2016-07-21T16:39:36.283Z,1469119176.283 [PitchRateCalculator] Loaded
2016-07-21T16:39:36.283Z,1469119176.283 [ComponentRegistry](DEBUG): SyncComponent "PitchRateCalculator" handled in the control thread.
2016-07-21T16:39:36.295Z,1469119176.295 [SpeedCalculator] Loaded
2016-07-21T16:39:36.295Z,1469119176.295 [ComponentRegistry](DEBUG): SyncComponent "SpeedCalculator" handled in the control thread.
2016-07-21T16:39:36.313Z,1469119176.313 [TempGradientCalculator] Loaded
2016-07-21T16:39:36.313Z,1469119176.313 [ComponentRegistry](DEBUG): SyncComponent "TempGradientCalculator" handled in the control thread.
2016-07-21T16:39:36.330Z,1469119176.330 [VerticalTemperatureHomogeneityIndexCalculator] Loaded
2016-07-21T16:39:36.331Z,1469119176.331 [ComponentRegistry](DEBUG): SyncComponent "VerticalTemperatureHomogeneityIndexCalculator" handled in the control thread.
2016-07-21T16:39:36.336Z,1469119176.336 [YawRateCalculator] Loaded
2016-07-21T16:39:36.337Z,1469119176.337 [ComponentRegistry](DEBUG): SyncComponent "YawRateCalculator" handled in the control thread.
2016-07-21T16:39:36.337Z,1469119176.337 [Module Loader](DEBUG): Loaded Module: Derivation (Contains the base derivation components)
2016-07-21T16:39:36.338Z,1469119176.338 [Module Loader](DEBUG): Loading Module at Modules/Estimation.so
2016-07-21T16:39:36.457Z,1469119176.457 [StratificationFrontDetector](INFO): threshold set to: 0.399988 degC
2016-07-21T16:39:36.457Z,1469119176.457 [StratificationFrontDetector](DEBUG): (re)initializing
2016-07-21T16:39:36.458Z,1469119176.457 [StratificationFrontDetector] Loaded
2016-07-21T16:39:36.458Z,1469119176.458 [ComponentRegistry](DEBUG): SyncComponent "StratificationFrontDetector" handled in the control thread.
2016-07-21T16:39:36.458Z,1469119176.458 [Module Loader](DEBUG): Loaded Module: Estimation (Contains the base estimation components)
2016-07-21T16:39:36.459Z,1469119176.459 [Module Loader](DEBUG): Loading Module at Modules/Guidance.so
2016-07-21T16:39:36.742Z,1469119176.742 [Module Loader](DEBUG): Loaded Module: Guidance (Contains behaviors and commands)
2016-07-21T16:39:36.743Z,1469119176.743 [Module Loader](DEBUG): Loading Module at Modules/Navigation.so
2016-07-21T16:39:36.867Z,1469119176.867 [DeadReckonUsingMultipleVelocitySources] Loaded
2016-07-21T16:39:36.868Z,1469119176.868 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingMultipleVelocitySources" handled in the control thread.
2016-07-21T16:39:36.926Z,1469119176.926 [DeadReckonUsingSpeedCalculator] Loaded
2016-07-21T16:39:36.926Z,1469119176.926 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingSpeedCalculator" handled in the control thread.
2016-07-21T16:39:36.984Z,1469119176.984 [DeadReckonWithRespectToWater] Loaded
2016-07-21T16:39:36.984Z,1469119176.984 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonWithRespectToWater" handled in the control thread.
2016-07-21T16:39:37.042Z,1469119177.042 [DeadReckonWithRespectToSeafloor] Loaded
2016-07-21T16:39:37.042Z,1469119177.042 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonWithRespectToSeafloor" handled in the control thread.
2016-07-21T16:39:37.106Z,1469119177.106 [DeadReckonUsingDVLWaterTrack] Loaded
2016-07-21T16:39:37.106Z,1469119177.106 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingDVLWaterTrack" handled in the control thread.
2016-07-21T16:39:37.123Z,1469119177.123 [NavChart] Loaded
2016-07-21T16:39:37.124Z,1469119177.124 [ComponentRegistry](DEBUG): SyncComponent "NavChart" handled in the control thread.
2016-07-21T16:39:37.128Z,1469119177.128 [UniversalFixResidualReporter] Loaded
2016-07-21T16:39:37.128Z,1469119177.128 [ComponentRegistry](DEBUG): SyncComponent "UniversalFixResidualReporter" handled in the control thread.
2016-07-21T16:39:37.129Z,1469119177.129 [Module Loader](DEBUG): Loaded Module: Navigation (Contains the base navigation components)
2016-07-21T16:39:37.130Z,1469119177.130 [Module Loader](DEBUG): Loading Module at Modules/Sample.so
2016-07-21T16:39:37.139Z,1469119177.139 [Module Loader](DEBUG): Loaded Module: Sample (This is a Sample Module of Sample Components)
2016-07-21T16:39:37.139Z,1469119177.139 [Module Loader](DEBUG): Loading Module at Modules/Science.so
2016-07-21T16:39:37.287Z,1469119177.287 [Module Loader](DEBUG): Loaded Module: Science (Contains the science components)
2016-07-21T16:39:37.288Z,1469119177.288 [Module Loader](DEBUG): Loading Module at Modules/Sensor.so
2016-07-21T16:39:37.914Z,1469119177.914 [DataOverHttps] Loaded
2016-07-21T16:39:37.914Z,1469119177.914 [ComponentRegistry](DEBUG): SyncComponent "DataOverHttps" handled in the control thread.
2016-07-21T16:39:37.941Z,1469119177.941 [Depth_Keller] Loaded
2016-07-21T16:39:37.942Z,1469119177.942 [ComponentRegistry](DEBUG): SyncComponent "Depth_Keller" handled in the control thread.
2016-07-21T16:39:37.947Z,1469119177.947 [DropWeight] Loaded
2016-07-21T16:39:37.947Z,1469119177.947 [ComponentRegistry](DEBUG): SyncComponent "DropWeight" handled in the control thread.
2016-07-21T16:39:38.047Z,1469119178.047 [NAL9602] Loaded
2016-07-21T16:39:38.047Z,1469119178.047 [ComponentRegistry](DEBUG): SyncComponent "NAL9602" handled in the control thread.
2016-07-21T16:39:38.057Z,1469119178.057 [Onboard] Loaded
2016-07-21T16:39:38.058Z,1469119178.057 [ComponentRegistry](DEBUG): SyncComponent "Onboard" handled in the control thread.
2016-07-21T16:39:38.065Z,1469119178.065 [Radio_Surface] Loaded
2016-07-21T16:39:38.065Z,1469119178.065 [ComponentRegistry](DEBUG): Component "Radio_Surface" handled in its own thread.
2016-07-21T16:39:38.067Z,1469119178.067 [Radio_Surface ThreadHandler](DEBUG): Created PCaller Thread at 4097F4E0
2016-07-21T16:39:38.067Z,1469119178.067 [Radio_Surface ThreadHandler](INFO): Protected caller Thread ID is 846
2016-07-21T16:39:38.263Z,1469119178.263 [PNI_TCM] Loaded
2016-07-21T16:39:38.264Z,1469119178.264 [ComponentRegistry](DEBUG): SyncComponent "PNI_TCM" handled in the control thread.
2016-07-21T16:39:38.691Z,1469119178.691 [Rowe_600LCM] Loaded
2016-07-21T16:39:38.691Z,1469119178.691 [ComponentRegistry](DEBUG): Component "Rowe_600LCM" handled in its own thread.
2016-07-21T16:39:38.692Z,1469119178.692 [Rowe_600LCM ThreadHandler](DEBUG): Created PCaller Thread at 409AF4E0
2016-07-21T16:39:38.692Z,1469119178.692 [Rowe_600LCM ThreadHandler](INFO): Protected caller Thread ID is 848
2016-07-21T16:39:40.693Z,1469119180.693 [BPC1] Loaded
2016-07-21T16:39:40.693Z,1469119180.694 [ComponentRegistry](DEBUG): SyncComponent "BPC1" handled in the control thread.
2016-07-21T16:39:40.694Z,1469119180.694 [Module Loader](DEBUG): Loaded Module: Sensor (Contains the sensor components)
2016-07-21T16:39:40.695Z,1469119180.695 [Module Loader](DEBUG): Loading Module at Modules/Servo.so
2016-07-21T16:39:40.823Z,1469119180.823 [BuoyancyServo] Loaded
2016-07-21T16:39:40.823Z,1469119180.823 [ComponentRegistry](DEBUG): SyncComponent "BuoyancyServo" handled in the control thread.
2016-07-21T16:39:40.836Z,1469119180.836 [ElevatorServo] Loaded
2016-07-21T16:39:40.836Z,1469119180.836 [ComponentRegistry](DEBUG): SyncComponent "ElevatorServo" handled in the control thread.
2016-07-21T16:39:40.849Z,1469119180.849 [MassServo] Loaded
2016-07-21T16:39:40.849Z,1469119180.849 [ComponentRegistry](DEBUG): SyncComponent "MassServo" handled in the control thread.
2016-07-21T16:39:40.861Z,1469119180.861 [RudderServo] Loaded
2016-07-21T16:39:40.862Z,1469119180.862 [ComponentRegistry](DEBUG): SyncComponent "RudderServo" handled in the control thread.
2016-07-21T16:39:40.874Z,1469119180.874 [ThrusterServo] Loaded
2016-07-21T16:39:40.874Z,1469119180.874 [ComponentRegistry](DEBUG): SyncComponent "ThrusterServo" handled in the control thread.
2016-07-21T16:39:40.875Z,1469119180.875 [Module Loader](DEBUG): Loaded Module: Servo (This is the module containing motor controllers)
2016-07-21T16:39:40.875Z,1469119180.875 [Module Loader](DEBUG): Loading Module at Modules/Simulator.so
2016-07-21T16:39:41.017Z,1469119181.017 [Module Loader](DEBUG): Loaded Module: Simulator (This is the module containing the Simulator)
2016-07-21T16:39:41.018Z,1469119181.017 [Module Loader](DEBUG): Loading Module at Modules/Trigger.so
2016-07-21T16:39:41.059Z,1469119181.059 [Module Loader](DEBUG): Loaded Module: Trigger (Contains triggers for use in missions)
2016-07-21T16:39:41.063Z,1469119181.063 [ComponentRegistry](DEBUG): SyncComponent "MissionManager" handled in the control thread.
2016-07-21T16:39:41.064Z,1469119181.064 [ComponentRegistry](DEBUG): SyncComponent "Reporter" handled in the control thread.
2016-07-21T16:39:41.070Z,1469119181.070 [ComponentRegistry](DEBUG): Component "NavChartDb" handled in its own thread.
2016-07-21T16:39:41.071Z,1469119181.071 [NavChartDb ThreadHandler](DEBUG): Created PCaller Thread at 40A5D4E0
2016-07-21T16:39:41.072Z,1469119181.072 [NavChartDb ThreadHandler](INFO): Protected caller Thread ID is 849
2016-07-21T16:39:41.076Z,1469119181.076 [Supervisor](INFO): Main Thread ID is 761
2016-07-21T16:39:41.076Z,1469119181.076 [Supervisor](DEBUG): Running supervisor.
2016-07-21T16:39:41.077Z,1469119181.077 [CommandLine ThreadHandler](INFO): Handler Thread ID is 850
2016-07-21T16:39:41.080Z,1469119181.080 [controlThread ThreadHandler](INFO): Handler Thread ID is 851
2016-07-21T16:39:41.081Z,1469119181.081 [controlThread](DEBUG): Initializing ControlThread
2016-07-21T16:39:41.082Z,1469119181.082 [SBIT](INFO): Initialize SBIT Component.
2016-07-21T16:39:41.082Z,1469119181.082 [SBIT](IMPORTANT): git: 2016-06-23-2-g2f15509
2016-07-21T16:39:41.082Z,1469119181.082 [SBIT](INFO): git hash: 2f1550965d76b3d6a6e6a25ce54162c92a4a0b33
2016-07-21T16:39:41.084Z,1469119181.084 [SBIT](INFO): Kernel Reporting Different Release From Configuration.
Kernel Expected: 2.6.27.8
Kernel Reported: 2.6.27.8-00011-g2bc81df-dirty
2016-07-21T16:39:41.084Z,1469119181.084 [SBIT](INFO): Kernel Reporting Different Version From Configuration.
Kernel Expected: #639 PREEMPT Wed Mar 12 12:53:33 PDT 2014
Kernel Reported: #646 PREEMPT Thu Feb 11 17:01:12 PST 2016
2016-07-21T16:39:41.085Z,1469119181.085 [SBIT](INFO): Beginning SBIT in 20.000000 seconds.
2016-07-21T16:39:41.086Z,1469119181.086 [IBIT](INFO): Initialize IBIT Component.
2016-07-21T16:39:41.087Z,1469119181.087 [CBIT](DEBUG): Initialize CBIT Component.
2016-07-21T16:39:41.087Z,1469119181.087 [CBIT](FAULT): LAST RESTART WAS UNINTENTIONAL.
2016-07-21T16:39:41.087Z,1469119181.087 [CBIT](INFO): Last reboot was NOT due to watchdog timer.
2016-07-21T16:39:41.088Z,1469119181.088 [logger ThreadHandler](INFO): Handler Thread ID is 852
2016-07-21T16:39:41.113Z,1469119181.113 [Radio_Surface ThreadHandler](INFO): Handler Thread ID is 853
2016-07-21T16:39:41.119Z,1469119181.119 [Radio_Surface](INFO): Powering up
2016-07-21T16:39:41.137Z,1469119181.137 [Rowe_600LCM ThreadHandler](INFO): Handler Thread ID is 854
2016-07-21T16:39:41.138Z,1469119181.138 [Rowe_600LCM](INFO): Initializing
2016-07-21T16:39:41.139Z,1469119181.138 [Rowe_600LCM](INFO): Checking LCM
2016-07-21T16:39:41.139Z,1469119181.139 [Rowe_600LCM](FAULT): LCM not connected
2016-07-21T16:39:41.139Z,1469119181.139 [Rowe_600LCM] Hardware Fault, FailCount= 1
2016-07-21T16:39:41.139Z,1469119181.139 [Rowe_600LCM](ERROR): Hardware Fault
2016-07-21T16:39:41.157Z,1469119181.158 [NavChartDb ThreadHandler](INFO): Handler Thread ID is 855
2016-07-21T16:39:41.167Z,1469119181.167 [NavChartDb](FAULT): Change detected in ENC collection. Wiping NavChart Directory
2016-07-21T16:39:41.169Z,1469119181.169 [VerticalControl](DEBUG): Initialize VerticalControlComponent.
2016-07-21T16:39:41.171Z,1469119181.171 [HorizontalControl](DEBUG): Initialize HorizontalControlComponent.
2016-07-21T16:39:41.172Z,1469119181.172 [SpeedControl](DEBUG): Initialize SpeedControlComponent.
2016-07-21T16:39:41.172Z,1469119181.172 [LoopControl](DEBUG): Initialize LoopControlComponent.
2016-07-21T16:39:41.172Z,1469119181.172 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2016-07-21T16:39:41.173Z,1469119181.173 [PitchRateCalculator](DEBUG): Initializing PitchRateCalculator.
2016-07-21T16:39:41.173Z,1469119181.173 [SpeedCalculator](DEBUG): Initializing SpeedCalculator.
2016-07-21T16:39:41.174Z,1469119181.174 [TempGradientCalculator](DEBUG): Initializing TempGradientCalculator.
2016-07-21T16:39:41.174Z,1469119181.174 [VerticalTemperatureHomogeneityIndexCalculator](DEBUG): (re)initializing
2016-07-21T16:39:41.175Z,1469119181.175 [YawRateCalculator](DEBUG): Initializing YawRateCalculator.
2016-07-21T16:39:41.176Z,1469119181.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-07-21T16:39:41.176Z,1469119181.176 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-07-21T16:39:41.177Z,1469119181.177 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-07-21T16:39:41.177Z,1469119181.177 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2016-07-21T16:39:41.178Z,1469119181.178 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2016-07-21T16:39:41.178Z,1469119181.178 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2016-07-21T16:39:41.179Z,1469119181.179 [DeadReckonWithRespectToWater](DEBUG): Initializing DeadReckonWithRespectToWater component.
2016-07-21T16:39:41.179Z,1469119181.179 [DeadReckonWithRespectToWater](INFO): Will consider orientation measurement stale after 120s.
2016-07-21T16:39:41.179Z,1469119181.179 [DeadReckonWithRespectToWater](INFO): Will consider velocity measurement stale after 20s.
2016-07-21T16:39:41.180Z,1469119181.180 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-07-21T16:39:41.180Z,1469119181.180 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-07-21T16:39:41.182Z,1469119181.182 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-07-21T16:39:41.183Z,1469119181.183 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-07-21T16:39:41.183Z,1469119181.183 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-07-21T16:39:41.183Z,1469119181.183 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-07-21T16:39:41.184Z,1469119181.184 [NavChart](DEBUG): Initialize NavChart Navigation.
2016-07-21T16:39:41.184Z,1469119181.184 [UniversalFixResidualReporter](DEBUG): Initializing UniversalFixResidualReporter component.
2016-07-21T16:39:41.211Z,1469119181.211 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2016-07-21T16:39:41.211Z,1469119181.211 [DropWeight] Hardware Fault, FailCount= 1
2016-07-21T16:39:41.211Z,1469119181.211 [DropWeight](ERROR): Hardware Fault
2016-07-21T16:39:41.223Z,1469119181.223 [MissionManager](INFO): Loading Mission: Missions/Startup.xml
2016-07-21T16:39:41.258Z,1469119181.258 [Startup:A.GoToSurface](DEBUG): Construct GoToSurface.
2016-07-21T16:39:41.297Z,1469119181.297 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
       xmlns:Control="Tethys/Control"
       xmlns:Guidance="Tethys/Guidance" 
       xmlns:Units="Tethys/Units"
       xmlns:Universal="Tethys/Universal"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
                           Tethys/Control http://okeanids.mbari.org/tethys/Xml/Control.xsd
                           Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
                           Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
                           Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
       Id="Startup">

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="StartupSatComms">

        <Sequence/>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:latitude_fix/>
        </ReadDatum>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:platform_communications/>
        </ReadDatum>

    </Aggregate>

</Mission>


2016-07-21T16:39:41.298Z,1469119181.298 [MissionManager](INFO): Loading Mission: Missions/Default.xml
2016-07-21T16:39:41.374Z,1469119181.374 [MissionManager](INFO): DefineArg Default.ElapsedSinceDefaultStarted = 0.000000 min
2016-07-21T16:39:41.375Z,1469119181.375 [Default:A.Wait](DEBUG): Construct Wait.
2016-07-21T16:39:41.406Z,1469119181.406 [Default:B.GoToSurface](DEBUG): Construct GoToSurface.
2016-07-21T16:39:41.428Z,1469119181.428 [Default:CheckIn:Read_Iridium:A_Timeout:A.Execute](DEBUG): Construct Execute.
2016-07-21T16:39:41.447Z,1469119181.447 [Default:CheckIn:C.Wait](DEBUG): Construct Wait.
2016-07-21T16:39:41.472Z,1469119181.472 [Default:E.Execute](DEBUG): Construct Execute.
2016-07-21T16:39:41.476Z,1469119181.476 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
xmlns:Guidance="Tethys/Guidance"
xmlns:Units="Tethys/Units"
xmlns:Universal="Tethys/Universal"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
Id="Default">

    <DefineArg Name="ElapsedSinceDefaultStarted"><Units:minute/><Value>0</Value></DefineArg>

    <Guidance:Wait>
        <Sequence/>
        <Description>
            Wait a moment to see if the scheduler starts a new mission before
            starting to actually run Default.
        </Description>
        <Setting><Guidance:Wait.duration/><Units:second/><Value>13</Value></Setting>
    </Guidance:Wait>

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="CheckIn">

        <Sequence Repeat="288"/>

        <ReadDatum Id="Read_GPS">
            <Sequence/>
            <Timeout Duration="P5M"/>
            <Universal:time_fix/>
        </ReadDatum>

        <ReadDatum Id="Read_Iridium">
            <Sequence/>
            <Timeout Duration="P2H">
                <Guidance:Execute>
                    <Sequence/>
                    <Setting><Guidance:Execute.command/><String>Burn 300</String></Setting>
                </Guidance:Execute>
                <Syslog Severity="Critical">Dropped weight due to communications timeout.</Syslog>
            </Timeout>
            <Universal:platform_communications/>
        </ReadDatum>

        <Guidance:Wait>
            <Sequence/>
            <Setting><Guidance:Wait.duration/><Units:minute/><Value>5</Value></Setting>
        </Guidance:Wait>

        <Assign><Sequence/><Arg Name="ElapsedSinceDefaultStarted"/><Elapsed><Universal:mission_started/></Elapsed></Assign>

        <Syslog Severity="Important">Default mission has been running for <Arg Name="ElapsedSinceDefaultStarted"/><Units:minute/></Syslog>

    </Aggregate>

    <Syslog Severity="Important">Restarting logs and Default mission.</Syslog>

    <Guidance:Execute>
        <Sequence/>
        <Setting><Guidance:Execute.command/><String>restart logs</String></Setting>
    </Guidance:Execute>

</Mission>


2016-07-21T16:39:41.482Z,1469119181.482 [controlThread](DEBUG): Component order: CycleStarter,DataOverHttps,Depth_Keller,DropWeight,NAL9602,Onboard,PNI_TCM,BPC1,Depth_Keller,DepthRateCalculator,PitchRateCalculator,SpeedCalculator,TempGradientCalculator,VerticalTemperatureHomogeneityIndexCalculator,YawRateCalculator,StratificationFrontDetector,DeadReckonUsingMultipleVelocitySources,DeadReckonUsingSpeedCalculator,DeadReckonWithRespectToWater,DeadReckonWithRespectToSeafloor,DeadReckonUsingDVLWaterTrack,NavChart,UniversalFixResidualReporter,MissionManager,VerticalControl,HorizontalControl,SpeedControl,LoopControl,BuoyancyServo,ElevatorServo,MassServo,RudderServo,ThrusterServo,SBIT,IBIT,CBIT,Reporter,LogSplitter,
2016-07-21T16:39:41.520Z,1469119181.520 [Depth_Keller](ERROR): Pressure reading out of range: 947.462036 decibar
2016-07-21T16:39:41.545Z,1469119181.545 [Rowe_600LCM](INFO): Powering down
2016-07-21T16:39:41.667Z,1469119181.667 [NavChartDb](INFO): Looking for Electronic Nav Chart files in directory: Resources/ElectronicNavigationCharts
2016-07-21T16:39:41.679Z,1469119181.679 [NavChartDb](IMPORTANT): Will load Electronic Nav Chart data from US1WC07M.000
2016-07-21T16:39:41.681Z,1469119181.681 [NavChartDb](IMPORTANT): Will load Electronic Nav Chart data from US2MI01M.000
2016-07-21T16:39:41.683Z,1469119181.682 [NavChartDb](IMPORTANT): Will load Electronic Nav Chart data from US2MI80M.000
2016-07-21T16:39:41.684Z,1469119181.684 [NavChartDb](IMPORTANT): Will load Electronic Nav Chart data from US2WC11M.000
2016-07-21T16:39:41.697Z,1469119181.697 [NavChartDb](IMPORTANT): Will load Electronic Nav Chart data from US3CA52M.000
2016-07-21T16:39:41.698Z,1469119181.698 [NavChartDb](IMPORTANT): Will load Electronic Nav Chart data from US4CA60M.000
2016-07-21T16:39:41.700Z,1469119181.700 [NavChartDb](IMPORTANT): Will load Electronic Nav Chart data from US4IN01M.000
2016-07-21T16:39:41.702Z,1469119181.702 [NavChartDb](IMPORTANT): Will load Electronic Nav Chart data from US4MI56M.000
2016-07-21T16:39:41.704Z,1469119181.704 [NavChartDb](IMPORTANT): Will load Electronic Nav Chart data from US4MI57M.000
2016-07-21T16:39:41.720Z,1469119181.720 [NavChartDb](IMPORTANT): Will load Electronic Nav Chart data from US4MI59M.000
2016-07-21T16:39:41.722Z,1469119181.722 [NavChartDb](IMPORTANT): Will load Electronic Nav Chart data from US4MI89M.000
2016-07-21T16:39:41.724Z,1469119181.724 [NavChartDb](IMPORTANT): Will load Electronic Nav Chart data from US4MI90M.000
2016-07-21T16:39:41.743Z,1469119181.743 [DepthRateCalculator](ERROR): Depth measurement is not active
2016-07-21T16:39:41.750Z,1469119181.750 [NavChartDb](IMPORTANT): Will load Electronic Nav Chart data from US4WI03M.000
2016-07-21T16:39:41.752Z,1469119181.751 [NavChartDb](IMPORTANT): Will load Electronic Nav Chart data from US4WI06M.000
2016-07-21T16:39:41.779Z,1469119181.779 [NavChartDb](IMPORTANT): Will load Electronic Nav Chart data from US4WI33M.000
2016-07-21T16:39:41.781Z,1469119181.781 [NavChartDb](IMPORTANT): Will load Electronic Nav Chart data from US4WI34M.000
2016-07-21T16:39:41.787Z,1469119181.787 [NavChartDb](IMPORTANT): Will load Electronic Nav Chart data from US5CA50M.000
2016-07-21T16:39:41.805Z,1469119181.805 [NavChartDb](IMPORTANT): Will load Electronic Nav Chart data from US5CA61M.000
2016-07-21T16:39:41.808Z,1469119181.808 [NavChartDb](IMPORTANT): Will load Electronic Nav Chart data from US5CA62M.000
2016-07-21T16:39:41.823Z,1469119181.823 [NavChartDb](IMPORTANT): Will load Electronic Nav Chart data from US5CA83M.000
2016-07-21T16:39:41.825Z,1469119181.825 [NavChartDb](IMPORTANT): Will load Electronic Nav Chart data from US2AK20M.000
2016-07-21T16:39:41.827Z,1469119181.827 [NavChartDb](IMPORTANT): Will load Electronic Nav Chart data from US3AK12M.000
2016-07-21T16:39:41.847Z,1469119181.847 [NavChartDb](IMPORTANT): Will load Electronic Nav Chart data from US3AK1DM.000
2016-07-21T16:39:41.849Z,1469119181.849 [NavChartDb](IMPORTANT): Will load Electronic Nav Chart data from US3AK5KM.000
2016-07-21T16:39:41.851Z,1469119181.851 [NavChartDb](IMPORTANT): Will load Electronic Nav Chart data from US4AK13M.000
2016-07-21T16:39:41.853Z,1469119181.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2016-07-21T16:39:41.854Z,1469119181.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2016-07-21T16:39:41.944Z,1469119181.944 [NavChartDb](IMPORTANT): Will load Electronic Nav Chart data from US4AK14M.000
2016-07-21T16:39:41.947Z,1469119181.947 [NavChartDb](IMPORTANT): Will load Electronic Nav Chart data from US4AK15M.000
2016-07-21T16:39:41.949Z,1469119181.949 [NavChartDb](IMPORTANT): Will load Electronic Nav Chart data from US4AK1AM.000
2016-07-21T16:39:41.951Z,1469119181.951 [NavChartDb](IMPORTANT): Will load Electronic Nav Chart data from US4AK1CM.000
2016-07-21T16:39:41.953Z,1469119181.954 [NavChartDb](IMPORTANT): Will load Electronic Nav Chart data from US4AK1EM.000
2016-07-21T16:39:41.956Z,1469119181.956 [NavChartDb](IMPORTANT): Will load Electronic Nav Chart data from US4AK5BM.000
2016-07-21T16:39:41.958Z,1469119181.958 [NavChartDb](IMPORTANT): Will load Electronic Nav Chart data from US4AK5JM.000
2016-07-21T16:39:41.961Z,1469119181.961 [NavChartDb](IMPORTANT): Will load Electronic Nav Chart data from US4AK5QM.000
2016-07-21T16:39:42.013Z,1469119182.013 [NavChartDb](IMPORTANT): Will load Electronic Nav Chart data from US4AK5VM.000
2016-07-21T16:39:42.018Z,1469119182.018 [NavChartDb](INFO): Setup scan of Resources/ElectronicNavigationCharts/US5CA83M.000
2016-07-21T16:39:42.021Z,1469119182.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:39:42.059Z,1469119182.059 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2016-07-21T16:39:42.081Z,1469119182.081 [DeadReckonWithRespectToWater](DEBUG): Starting up and don't have orientation data yet.
2016-07-21T16:39:42.088Z,1469119182.088 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2016-07-21T16:39:42.105Z,1469119182.105 [DeadReckonUsingDVLWaterTrack](DEBUG): Starting up and don't have orientation data yet.
2016-07-21T16:39:42.212Z,1469119182.212 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2016-07-21T16:39:42.237Z,1469119182.237 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2016-07-21T16:39:42.259Z,1469119182.259 [ElevatorServo](DEBUG): Initializing EZServoServo.
2016-07-21T16:39:42.265Z,1469119182.265 [ElevatorServo](DEBUG): Initializing ElevatorServo.
2016-07-21T16:39:42.271Z,1469119182.271 [MassServo](DEBUG): Initializing EZServoServo.
2016-07-21T16:39:42.277Z,1469119182.277 [MassServo](DEBUG): Initializing MassServo.
2016-07-21T16:39:42.283Z,1469119182.283 [RudderServo](DEBUG): Initializing EZServoServo.
2016-07-21T16:39:42.289Z,1469119182.289 [RudderServo](DEBUG): Initializing RudderServo.
2016-07-21T16:39:42.295Z,1469119182.295 [ThrusterServo](DEBUG): Initializing EZServoServo.
2016-07-21T16:39:42.301Z,1469119182.301 [ThrusterServo](DEBUG): Initializing ThrusterServo.
2016-07-21T16:39:42.350Z,1469119182.350 [CommandLine](FAULT): Scheduling is paused
2016-07-21T16:39:42.353Z,1469119182.353 [CBIT](ERROR): Hardware Fault in component: DropWeight
2016-07-21T16:39:42.354Z,1469119182.353 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2016-07-21T16:39:42.354Z,1469119182.354 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2016-07-21T16:39:42.595Z,1469119182.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2016-07-21T16:39:42.595Z,1469119182.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2016-07-21T16:39:42.596Z,1469119182.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:39:42.597Z,1469119182.597 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2016-07-21T16:39:42.598Z,1469119182.598 [DeadReckonWithRespectToWater](DEBUG): Starting up and don't have orientation data yet.
2016-07-21T16:39:42.599Z,1469119182.599 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2016-07-21T16:39:42.599Z,1469119182.599 [DeadReckonUsingDVLWaterTrack](DEBUG): Starting up and don't have orientation data yet.
2016-07-21T16:39:42.818Z,1469119182.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2016-07-21T16:39:42.818Z,1469119182.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2016-07-21T16:39:42.819Z,1469119182.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:39:42.820Z,1469119182.820 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2016-07-21T16:39:42.821Z,1469119182.820 [DeadReckonWithRespectToWater](DEBUG): Starting up and don't have orientation data yet.
2016-07-21T16:39:42.832Z,1469119182.832 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2016-07-21T16:39:42.845Z,1469119182.845 [DeadReckonUsingDVLWaterTrack](DEBUG): Starting up and don't have orientation data yet.
2016-07-21T16:39:43.177Z,1469119183.177 [BuoyancyServo](ERROR): Buoyancy initialization uart error serial timeout
2016-07-21T16:39:43.177Z,1469119183.177 [BuoyancyServo](FAULT): Buoyancy failed to initialize
2016-07-21T16:39:43.177Z,1469119183.177 [BuoyancyServo] Communications Fault, FailCount= 1
2016-07-21T16:39:43.177Z,1469119183.177 [BuoyancyServo](ERROR): Communications Fault
2016-07-21T16:39:43.388Z,1469119183.388 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-07-21T16:39:43.389Z,1469119183.388 [Rowe_600LCM] No Fault, FailCount= 1
2016-07-21T16:39:43.389Z,1469119183.389 [CBIT](ERROR): Communications Fault in component: BuoyancyServo
2016-07-21T16:39:43.399Z,1469119183.399 [NAL9602](INFO): Powering up NAL9602
2016-07-21T16:39:43.437Z,1469119183.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2016-07-21T16:39:43.438Z,1469119183.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2016-07-21T16:39:43.439Z,1469119183.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:39:43.439Z,1469119183.439 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2016-07-21T16:39:43.440Z,1469119183.440 [DeadReckonWithRespectToWater](DEBUG): Starting up and don't have orientation data yet.
2016-07-21T16:39:43.441Z,1469119183.441 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2016-07-21T16:39:43.442Z,1469119183.442 [DeadReckonUsingDVLWaterTrack](DEBUG): Starting up and don't have orientation data yet.
2016-07-21T16:39:43.455Z,1469119183.455 [BuoyancyServo](DEBUG): Uninitialize Buoyancy Servo.
2016-07-21T16:39:43.456Z,1469119183.456 [BuoyancyServo](INFO): Powering down
2016-07-21T16:39:43.609Z,1469119183.609 [Rowe_600LCM](INFO): Initializing
2016-07-21T16:39:43.609Z,1469119183.609 [Rowe_600LCM](INFO): Checking LCM
2016-07-21T16:39:43.609Z,1469119183.609 [Rowe_600LCM](FAULT): LCM not connected
2016-07-21T16:39:43.610Z,1469119183.610 [Rowe_600LCM] Hardware Fault, FailCount= 2
2016-07-21T16:39:43.610Z,1469119183.610 [Rowe_600LCM](ERROR): Hardware Fault
2016-07-21T16:39:43.848Z,1469119183.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2016-07-21T16:39:43.849Z,1469119183.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2016-07-21T16:39:43.850Z,1469119183.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:39:43.865Z,1469119183.865 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2016-07-21T16:39:43.866Z,1469119183.866 [DeadReckonWithRespectToWater](DEBUG): Starting up and don't have orientation data yet.
2016-07-21T16:39:43.867Z,1469119183.867 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2016-07-21T16:39:43.868Z,1469119183.868 [DeadReckonUsingDVLWaterTrack](DEBUG): Starting up and don't have orientation data yet.
2016-07-21T16:39:43.892Z,1469119183.892 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2016-07-21T16:39:44.013Z,1469119184.013 [Rowe_600LCM](INFO): Powering down
2016-07-21T16:39:44.228Z,1469119184.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2016-07-21T16:39:44.229Z,1469119184.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2016-07-21T16:39:44.230Z,1469119184.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:39:44.237Z,1469119184.237 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2016-07-21T16:39:44.238Z,1469119184.238 [DeadReckonWithRespectToWater](DEBUG): Starting up and don't have orientation data yet.
2016-07-21T16:39:44.239Z,1469119184.239 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2016-07-21T16:39:44.240Z,1469119184.240 [DeadReckonUsingDVLWaterTrack](DEBUG): Starting up and don't have orientation data yet.
2016-07-21T16:39:44.632Z,1469119184.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2016-07-21T16:39:44.633Z,1469119184.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2016-07-21T16:39:44.634Z,1469119184.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:39:44.649Z,1469119184.649 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2016-07-21T16:39:44.650Z,1469119184.650 [DeadReckonWithRespectToWater](DEBUG): Starting up and don't have orientation data yet.
2016-07-21T16:39:44.651Z,1469119184.651 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2016-07-21T16:39:44.651Z,1469119184.651 [DeadReckonUsingDVLWaterTrack](DEBUG): Starting up and don't have orientation data yet.
2016-07-21T16:39:45.040Z,1469119185.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2016-07-21T16:39:45.040Z,1469119185.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2016-07-21T16:39:45.041Z,1469119185.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:39:45.049Z,1469119185.049 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2016-07-21T16:39:45.050Z,1469119185.050 [DeadReckonWithRespectToWater](DEBUG): Starting up and don't have orientation data yet.
2016-07-21T16:39:45.051Z,1469119185.051 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2016-07-21T16:39:45.052Z,1469119185.052 [DeadReckonUsingDVLWaterTrack](DEBUG): Starting up and don't have orientation data yet.
2016-07-21T16:39:45.492Z,1469119185.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2016-07-21T16:39:45.497Z,1469119185.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:39:45.554Z,1469119185.554 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-07-21T16:39:45.554Z,1469119185.554 [Rowe_600LCM] No Fault, FailCount= 2
2016-07-21T16:39:45.555Z,1469119185.555 [CBIT](INFO): Clearing failed state for component BuoyancyServo
2016-07-21T16:39:45.555Z,1469119185.555 [BuoyancyServo] No Fault, FailCount= 1
2016-07-21T16:39:45.637Z,1469119185.637 [Rowe_600LCM](INFO): Initializing
2016-07-21T16:39:45.637Z,1469119185.637 [Rowe_600LCM](INFO): Checking LCM
2016-07-21T16:39:45.637Z,1469119185.638 [Rowe_600LCM](FAULT): LCM not connected
2016-07-21T16:39:45.638Z,1469119185.638 [Rowe_600LCM] Hardware Fault, FailCount= 3
2016-07-21T16:39:45.638Z,1469119185.638 [Rowe_600LCM](ERROR): Hardware Fault
2016-07-21T16:39:45.889Z,1469119185.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2016-07-21T16:39:45.890Z,1469119185.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:39:45.914Z,1469119185.914 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2016-07-21T16:39:46.041Z,1469119186.041 [Rowe_600LCM](INFO): Powering down
2016-07-21T16:39:46.045Z,1469119186.045 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2016-07-21T16:39:46.165Z,1469119186.165 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2016-07-21T16:39:46.290Z,1469119186.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2016-07-21T16:39:46.291Z,1469119186.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:39:46.666Z,1469119186.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:39:47.085Z,1469119187.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:39:47.306Z,1469119187.306 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-07-21T16:39:47.306Z,1469119187.306 [Rowe_600LCM] No Fault, FailCount= 3
2016-07-21T16:39:47.488Z,1469119187.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:39:47.657Z,1469119187.657 [Rowe_600LCM](INFO): Initializing
2016-07-21T16:39:47.657Z,1469119187.657 [Rowe_600LCM](INFO): Checking LCM
2016-07-21T16:39:47.658Z,1469119187.658 [Rowe_600LCM](FAULT): LCM not connected
2016-07-21T16:39:47.658Z,1469119187.658 [Rowe_600LCM] Hardware Fault, FailCount= 4
2016-07-21T16:39:47.658Z,1469119187.658 [Rowe_600LCM](ERROR): Hardware Fault
2016-07-21T16:39:47.841Z,1469119187.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:39:47.879Z,1469119187.879 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2016-07-21T16:39:48.061Z,1469119188.061 [Rowe_600LCM](INFO): Powering down
2016-07-21T16:39:48.264Z,1469119188.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:39:48.670Z,1469119188.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:39:49.030Z,1469119189.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:39:49.439Z,1469119189.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:39:49.579Z,1469119189.579 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-07-21T16:39:49.579Z,1469119189.579 [Rowe_600LCM] No Fault, FailCount= 4
2016-07-21T16:39:49.677Z,1469119189.677 [Rowe_600LCM](INFO): Initializing
2016-07-21T16:39:49.677Z,1469119189.677 [Rowe_600LCM](INFO): Checking LCM
2016-07-21T16:39:49.677Z,1469119189.677 [Rowe_600LCM](FAULT): LCM not connected
2016-07-21T16:39:49.678Z,1469119189.678 [Rowe_600LCM] Hardware Fault, FailCount= 5
2016-07-21T16:39:49.678Z,1469119189.678 [Rowe_600LCM](ERROR): Hardware Fault
2016-07-21T16:39:49.847Z,1469119189.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:39:49.876Z,1469119189.876 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2016-07-21T16:39:49.877Z,1469119189.877 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2016-07-21T16:39:50.081Z,1469119190.081 [Rowe_600LCM](INFO): Powering down
2016-07-21T16:39:50.254Z,1469119190.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:39:50.655Z,1469119190.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:39:51.035Z,1469119191.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:39:51.447Z,1469119191.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:39:51.851Z,1469119191.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:39:52.247Z,1469119192.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:39:52.683Z,1469119192.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:39:53.078Z,1469119193.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:39:53.455Z,1469119193.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:39:53.862Z,1469119193.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:39:54.214Z,1469119194.214 [NAL9602](INFO): NAL9602 initialized
2016-07-21T16:39:54.270Z,1469119194.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:39:54.667Z,1469119194.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:39:55.062Z,1469119195.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:39:55.468Z,1469119195.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:39:55.879Z,1469119195.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:39:56.262Z,1469119196.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:39:56.670Z,1469119196.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:39:57.031Z,1469119197.031 [BPC1](FAULT): Failed to initialize
2016-07-21T16:39:57.032Z,1469119197.032 [BPC1] Communications Fault, FailCount= 1
2016-07-21T16:39:57.032Z,1469119197.032 [BPC1](ERROR): Communications Fault
2016-07-21T16:39:57.060Z,1469119197.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:39:57.098Z,1469119197.098 [CBIT](ERROR): Communications Fault in component: BPC1
2016-07-21T16:39:57.460Z,1469119197.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:39:57.891Z,1469119197.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:39:58.271Z,1469119198.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:39:58.328Z,1469119198.328 [CBIT](INFO): Clearing failed state for component BPC1
2016-07-21T16:39:58.328Z,1469119198.328 [BPC1] No Fault, FailCount= 1
2016-07-21T16:39:58.755Z,1469119198.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:39:59.069Z,1469119199.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:39:59.448Z,1469119199.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:39:59.874Z,1469119199.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:00.270Z,1469119200.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:00.693Z,1469119200.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:00.817Z,1469119200.817 [NavChartDb](INFO): Done scanning features of Resources/ElectronicNavigationCharts/US5CA83M.000
2016-07-21T16:40:01.059Z,1469119201.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:01.474Z,1469119201.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:01.842Z,1469119201.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:01.877Z,1469119201.877 [SBIT](IMPORTANT): Beginning Startup BIT
2016-07-21T16:40:01.882Z,1469119201.882 [CBIT](IMPORTANT): Beginning GF scan
2016-07-21T16:40:02.259Z,1469119202.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:02.458Z,1469119202.458 [CBIT](IMPORTANT): Open Volts:2.501569
Open Current:0.001783
2016-07-21T16:40:02.668Z,1469119202.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:03.071Z,1469119203.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:03.470Z,1469119203.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:03.813Z,1469119203.813 [CBIT](IMPORTANT): A0 Volts:2.666531
A0 Current:0.105596
2016-07-21T16:40:03.890Z,1469119203.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:04.447Z,1469119204.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:04.842Z,1469119204.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:05.165Z,1469119205.165 [CBIT](IMPORTANT): A1 Volts:1.973982
A1 Current:-0.335273
2016-07-21T16:40:05.254Z,1469119205.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:05.639Z,1469119205.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:06.046Z,1469119206.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:06.446Z,1469119206.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:06.746Z,1469119206.746 [CBIT](IMPORTANT): A2 Volts:2.667241
A2 Current:0.105860
2016-07-21T16:40:06.862Z,1469119206.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:07.250Z,1469119207.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:07.655Z,1469119207.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:08.061Z,1469119208.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:08.301Z,1469119208.301 [CBIT](IMPORTANT): A3 Volts:2.619891
A3 Current:0.076295
2016-07-21T16:40:08.442Z,1469119208.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:08.851Z,1469119208.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:09.248Z,1469119209.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:09.481Z,1469119209.481 [CBIT](IMPORTANT): B0 Volts:2.387319
B0 Current:-0.072027
2016-07-21T16:40:09.631Z,1469119209.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:10.062Z,1469119210.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:10.430Z,1469119210.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:10.681Z,1469119210.681 [CBIT](IMPORTANT): B1 Volts:2.283740
B1 Current:-0.137392
2016-07-21T16:40:10.827Z,1469119210.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:11.263Z,1469119211.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:11.618Z,1469119211.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:11.873Z,1469119211.873 [CBIT](IMPORTANT): B2 Volts:2.282112
B2 Current:-0.138033
2016-07-21T16:40:12.031Z,1469119212.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:12.443Z,1469119212.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:12.846Z,1469119212.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:13.082Z,1469119213.082 [CBIT](IMPORTANT): B3 Volts:1.798074
B3 Current:-0.445564
2016-07-21T16:40:13.239Z,1469119213.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:13.294Z,1469119213.294 [CBIT](FAULT): Low side GF detected
mA:
CHAN A0 (Batt): 0.105596
CHAN A1 (24V): -0.335273
CHAN A2 (12V): 0.105860
CHAN A3 (5V): 0.076295
CHAN B0 (3.3V): -0.072027
CHAN B1 (3.15aV): -0.137392
CHAN B2 (3.15bV): -0.138033
CHAN B3 (GND): -0.445564
OPEN: 0.001783
Full Scale Calc: 4.765 mA, -1.589 mA
2016-07-21T16:40:13.659Z,1469119213.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:14.020Z,1469119214.020 [BPC1](FAULT): Failed to initialize
2016-07-21T16:40:14.020Z,1469119214.020 [BPC1] Communications Fault, FailCount= 2
2016-07-21T16:40:14.020Z,1469119214.020 [BPC1](ERROR): Communications Fault
2016-07-21T16:40:14.059Z,1469119214.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:14.093Z,1469119214.093 [CBIT](ERROR): Communications Fault in component: BPC1
2016-07-21T16:40:14.419Z,1469119214.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:14.826Z,1469119214.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:15.230Z,1469119215.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:15.281Z,1469119215.281 [CBIT](INFO): Clearing failed state for component BPC1
2016-07-21T16:40:15.281Z,1469119215.281 [BPC1] No Fault, FailCount= 2
2016-07-21T16:40:15.695Z,1469119215.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:16.040Z,1469119216.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:16.440Z,1469119216.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:16.827Z,1469119216.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:17.225Z,1469119217.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:17.856Z,1469119217.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:18.231Z,1469119218.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:18.626Z,1469119218.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:19.030Z,1469119219.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:19.419Z,1469119219.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:19.826Z,1469119219.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:20.227Z,1469119220.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:20.625Z,1469119220.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:21.026Z,1469119221.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:21.402Z,1469119221.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:21.832Z,1469119221.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:22.231Z,1469119222.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:22.682Z,1469119222.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:23.039Z,1469119223.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:23.434Z,1469119223.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:23.823Z,1469119223.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:24.220Z,1469119224.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:24.644Z,1469119224.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:25.018Z,1469119225.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:25.417Z,1469119225.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:25.821Z,1469119225.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:26.216Z,1469119226.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:26.619Z,1469119226.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:27.026Z,1469119227.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:27.424Z,1469119227.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:27.820Z,1469119227.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:28.224Z,1469119228.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:28.630Z,1469119228.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:29.026Z,1469119229.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:29.219Z,1469119229.219 [NavChartDb](INFO): # of records loaded: 5000
2016-07-21T16:40:29.447Z,1469119229.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:29.850Z,1469119229.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:30.200Z,1469119230.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:30.627Z,1469119230.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:30.992Z,1469119230.992 [BPC1](FAULT): Failed to initialize
2016-07-21T16:40:30.992Z,1469119230.992 [BPC1] Communications Fault, FailCount= 3
2016-07-21T16:40:30.992Z,1469119230.992 [BPC1](ERROR): Communications Fault
2016-07-21T16:40:31.018Z,1469119231.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:31.034Z,1469119231.034 [CBIT](ERROR): Communications Fault in component: BPC1
2016-07-21T16:40:31.422Z,1469119231.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:31.825Z,1469119231.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:32.246Z,1469119232.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:32.261Z,1469119232.261 [CBIT](INFO): Clearing failed state for component BPC1
2016-07-21T16:40:32.261Z,1469119232.261 [BPC1] No Fault, FailCount= 3
2016-07-21T16:40:32.687Z,1469119232.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:33.045Z,1469119233.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:33.439Z,1469119233.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:33.821Z,1469119233.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:34.254Z,1469119234.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:34.628Z,1469119234.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:35.023Z,1469119235.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:35.425Z,1469119235.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:35.826Z,1469119235.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:36.223Z,1469119236.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:36.674Z,1469119236.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:37.051Z,1469119237.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:37.424Z,1469119237.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:37.827Z,1469119237.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:38.218Z,1469119238.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:38.610Z,1469119238.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:39.031Z,1469119239.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:39.420Z,1469119239.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:39.822Z,1469119239.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:40.234Z,1469119240.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:40.632Z,1469119240.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:41.011Z,1469119241.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:41.438Z,1469119241.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:41.809Z,1469119241.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:42.216Z,1469119242.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:42.623Z,1469119242.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:43.011Z,1469119243.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:43.416Z,1469119243.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:43.825Z,1469119243.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:44.234Z,1469119244.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:44.747Z,1469119244.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:45.140Z,1469119245.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:45.545Z,1469119245.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:45.935Z,1469119245.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:46.335Z,1469119246.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:46.737Z,1469119246.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:47.136Z,1469119247.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:47.536Z,1469119247.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:47.916Z,1469119247.916 [BPC1](FAULT): Failed to initialize
2016-07-21T16:40:47.916Z,1469119247.916 [BPC1] Communications Fault, FailCount= 4
2016-07-21T16:40:47.916Z,1469119247.916 [BPC1](ERROR): Communications Fault
2016-07-21T16:40:47.968Z,1469119247.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:48.038Z,1469119248.038 [CBIT](ERROR): Communications Fault in component: BPC1
2016-07-21T16:40:48.324Z,1469119248.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:48.730Z,1469119248.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:49.141Z,1469119249.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:49.176Z,1469119249.177 [CBIT](INFO): Clearing failed state for component BPC1
2016-07-21T16:40:49.177Z,1469119249.177 [BPC1] No Fault, FailCount= 4
2016-07-21T16:40:49.619Z,1469119249.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:49.943Z,1469119249.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:50.344Z,1469119250.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:50.739Z,1469119250.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:51.136Z,1469119251.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:51.549Z,1469119251.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:51.948Z,1469119251.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:52.352Z,1469119252.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:52.754Z,1469119252.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:53.151Z,1469119253.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:53.550Z,1469119253.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:53.934Z,1469119253.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:54.366Z,1469119254.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:54.783Z,1469119254.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:55.168Z,1469119255.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:55.555Z,1469119255.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:55.962Z,1469119255.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:55.973Z,1469119255.973 [SBIT](IMPORTANT): SBIT PASSED
2016-07-21T16:40:56.334Z,1469119256.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:56.339Z,1469119256.339 [MissionManager](IMPORTANT): Started mission Startup
2016-07-21T16:40:56.340Z,1469119256.339 [Startup] Running Loop=1
2016-07-21T16:40:56.340Z,1469119256.340 [Startup](DEBUG): Aggregate::initialize Startup
2016-07-21T16:40:56.340Z,1469119256.340 [Startup:A.GoToSurface] Running Loop=1
2016-07-21T16:40:56.340Z,1469119256.340 [Startup:A.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2016-07-21T16:40:56.340Z,1469119256.340 [Startup:A.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2016-07-21T16:40:56.365Z,1469119256.365 [Startup:A.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2016-07-21T16:40:56.365Z,1469119256.365 [Startup:A.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2016-07-21T16:40:56.366Z,1469119256.366 [Startup:A.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds.
2016-07-21T16:40:56.366Z,1469119256.366 [Startup:A.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2016-07-21T16:40:56.372Z,1469119256.372 [Startup:StartupSatComms] Running Loop=1
2016-07-21T16:40:56.372Z,1469119256.372 [Startup:StartupSatComms](DEBUG): Aggregate::initialize Startup:StartupSatComms
2016-07-21T16:40:56.372Z,1469119256.372 [Startup:StartupSatComms:A] Running Loop=1
2016-07-21T16:40:56.735Z,1469119256.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:56.740Z,1469119256.740 [Startup:StartupSatComms:A](DEBUG): Initialize ReadDataComponent to sense latitude_fix
2016-07-21T16:40:57.144Z,1469119257.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:57.538Z,1469119257.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:57.944Z,1469119257.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:58.352Z,1469119258.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:58.748Z,1469119258.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:59.135Z,1469119259.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:59.546Z,1469119259.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:40:59.946Z,1469119259.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:00.349Z,1469119260.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:00.779Z,1469119260.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:01.185Z,1469119261.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:01.547Z,1469119261.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:01.950Z,1469119261.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:02.345Z,1469119262.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:02.747Z,1469119262.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:03.150Z,1469119263.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:03.549Z,1469119263.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:03.947Z,1469119263.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:04.350Z,1469119264.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:04.715Z,1469119264.715 [BPC1](FAULT): Failed to initialize
2016-07-21T16:41:04.715Z,1469119264.715 [BPC1] Communications Fault, FailCount= 5
2016-07-21T16:41:04.715Z,1469119264.715 [BPC1](ERROR): Communications Fault
2016-07-21T16:41:04.754Z,1469119264.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:04.774Z,1469119264.774 [CBIT](ERROR): Communications Fault in component: BPC1
2016-07-21T16:41:05.176Z,1469119265.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:05.577Z,1469119265.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:05.980Z,1469119265.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:05.996Z,1469119265.996 [CBIT](INFO): Clearing failed state for component BPC1
2016-07-21T16:41:05.996Z,1469119265.996 [BPC1] No Fault, FailCount= 5
2016-07-21T16:41:06.435Z,1469119266.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:06.750Z,1469119266.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:07.157Z,1469119267.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:07.547Z,1469119267.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:07.951Z,1469119267.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:08.357Z,1469119268.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:08.747Z,1469119268.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:09.141Z,1469119269.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:09.543Z,1469119269.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:09.947Z,1469119269.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:10.344Z,1469119270.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:10.742Z,1469119270.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:11.149Z,1469119271.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:11.544Z,1469119271.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:11.922Z,1469119271.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:12.338Z,1469119272.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:12.742Z,1469119272.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:13.131Z,1469119273.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:13.530Z,1469119273.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:13.947Z,1469119273.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:14.031Z,1469119274.031 [NavChartDb](INFO): # of records loaded: 10000
2016-07-21T16:41:14.344Z,1469119274.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:14.739Z,1469119274.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:15.147Z,1469119275.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:15.563Z,1469119275.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:15.940Z,1469119275.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:16.354Z,1469119276.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:16.770Z,1469119276.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:17.143Z,1469119277.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:17.542Z,1469119277.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:17.931Z,1469119277.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:18.334Z,1469119278.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:18.742Z,1469119278.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:19.140Z,1469119279.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:19.538Z,1469119279.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:19.951Z,1469119279.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:20.347Z,1469119280.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:20.749Z,1469119280.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:21.080Z,1469119281.080 [NavChartDb](INFO): Calculating coverage of Resources/ElectronicNavigationCharts/US5CA83M.000
2016-07-21T16:41:21.153Z,1469119281.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:21.539Z,1469119281.539 [BPC1](FAULT): Failed to initialize
2016-07-21T16:41:21.539Z,1469119281.539 [BPC1] Communications Fault, FailCount= 6
2016-07-21T16:41:21.539Z,1469119281.539 [BPC1](ERROR): Communications Fault
2016-07-21T16:41:21.579Z,1469119281.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:21.632Z,1469119281.632 [CBIT](ERROR): Communications Fault in component: BPC1
2016-07-21T16:41:21.963Z,1469119281.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:22.374Z,1469119282.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:22.739Z,1469119282.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:22.796Z,1469119282.796 [CBIT](INFO): Clearing failed state for component BPC1
2016-07-21T16:41:22.796Z,1469119282.796 [BPC1] No Fault, FailCount= 6
2016-07-21T16:41:23.203Z,1469119283.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:23.572Z,1469119283.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:23.970Z,1469119283.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:24.329Z,1469119284.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:24.743Z,1469119284.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:25.132Z,1469119285.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:25.276Z,1469119285.276 [NavChartDb](INFO): # of records loaded: 15000
2016-07-21T16:41:25.555Z,1469119285.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:25.963Z,1469119285.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:26.360Z,1469119286.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:26.758Z,1469119286.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:27.162Z,1469119287.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:27.550Z,1469119287.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:27.959Z,1469119287.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:28.047Z,1469119288.047 [NavChartDb](INFO): Done scanning edges of Resources/ElectronicNavigationCharts/US5CA83M.000
2016-07-21T16:41:28.350Z,1469119288.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:28.747Z,1469119288.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:29.127Z,1469119289.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:29.542Z,1469119289.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:29.968Z,1469119289.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:30.331Z,1469119290.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:35.456Z,1469119295.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:35.615Z,1469119295.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:36.027Z,1469119296.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:36.333Z,1469119296.333 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.003900
2016-07-21T16:41:36.428Z,1469119296.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:36.791Z,1469119296.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:37.211Z,1469119297.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:37.594Z,1469119297.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:37.975Z,1469119297.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:38.363Z,1469119298.363 [BPC1](FAULT): Failed to initialize
2016-07-21T16:41:38.363Z,1469119298.363 [BPC1] Communications Fault, FailCount= 7
2016-07-21T16:41:38.363Z,1469119298.363 [BPC1](ERROR): Communications Fault
2016-07-21T16:41:38.371Z,1469119298.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:38.426Z,1469119298.426 [CBIT](ERROR): Communications Fault in component: BPC1
2016-07-21T16:41:38.771Z,1469119298.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:39.170Z,1469119299.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:39.573Z,1469119299.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:39.589Z,1469119299.589 [CBIT](INFO): Clearing failed state for component BPC1
2016-07-21T16:41:39.589Z,1469119299.589 [BPC1] No Fault, FailCount= 7
2016-07-21T16:41:40.046Z,1469119300.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:40.394Z,1469119300.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:40.794Z,1469119300.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:41.194Z,1469119301.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:41.592Z,1469119301.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:42.013Z,1469119302.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:42.410Z,1469119302.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:42.799Z,1469119302.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:43.206Z,1469119303.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:43.583Z,1469119303.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:43.973Z,1469119303.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:44.385Z,1469119304.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:44.770Z,1469119304.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:45.174Z,1469119305.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:45.594Z,1469119305.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:46.000Z,1469119306.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:46.404Z,1469119306.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:46.794Z,1469119306.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:47.203Z,1469119307.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:47.588Z,1469119307.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:48.004Z,1469119308.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:48.418Z,1469119308.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:48.787Z,1469119308.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:49.176Z,1469119309.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:49.590Z,1469119309.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:49.976Z,1469119309.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:50.391Z,1469119310.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:50.811Z,1469119310.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:51.192Z,1469119311.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:51.602Z,1469119311.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:52.003Z,1469119312.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:52.371Z,1469119312.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:52.803Z,1469119312.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:53.207Z,1469119313.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:53.570Z,1469119313.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:53.988Z,1469119313.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:54.384Z,1469119314.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:54.774Z,1469119314.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:55.179Z,1469119315.179 [BPC1](FAULT): Failed to initialize
2016-07-21T16:41:55.179Z,1469119315.179 [BPC1] Communications Fault, FailCount= 8
2016-07-21T16:41:55.179Z,1469119315.179 [BPC1](ERROR): Communications Fault
2016-07-21T16:41:55.188Z,1469119315.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:55.251Z,1469119315.251 [CBIT](ERROR): Communications Fault in component: BPC1
2016-07-21T16:41:55.590Z,1469119315.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:55.986Z,1469119315.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:56.398Z,1469119316.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:56.403Z,1469119316.403 [Startup:StartupSatComms:A](INFO): Timed out from 2016-07-21T16:40:56.4Z
2016-07-21T16:41:56.403Z,1469119316.403 [Startup:StartupSatComms:A] Stopped
2016-07-21T16:41:56.403Z,1469119316.403 [Startup:StartupSatComms:B] Running Loop=1
2016-07-21T16:41:56.450Z,1469119316.450 [CBIT](INFO): Clearing failed state for component BPC1
2016-07-21T16:41:56.450Z,1469119316.450 [BPC1] No Fault, FailCount= 8
2016-07-21T16:41:56.855Z,1469119316.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:56.864Z,1469119316.864 [Startup:StartupSatComms:B](DEBUG): Initialize ReadDataComponent to sense platform_communications
2016-07-21T16:41:57.991Z,1469119317.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:41:58.116Z,1469119318.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:03.505Z,1469119323.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:03.566Z,1469119323.566 [DataOverHttps](INFO): Sending 18 bytes from file Logs/20160720T212229/Courier0032.lzma
2016-07-21T16:42:03.633Z,1469119323.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:04.007Z,1469119324.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:04.330Z,1469119324.330 [DataOverHttps](INFO): Moved sent file to Logs/20160720T212229/Courier0032.lzma.bak
2016-07-21T16:42:04.330Z,1469119324.330 [DataOverHttps](INFO): SBD MOMSN=4352191
2016-07-21T16:42:04.414Z,1469119324.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:05.023Z,1469119325.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:05.174Z,1469119325.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:10.305Z,1469119330.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:10.465Z,1469119330.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:10.862Z,1469119330.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:11.262Z,1469119331.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:11.649Z,1469119331.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:12.023Z,1469119332.023 [BPC1](FAULT): Failed to initialize
2016-07-21T16:42:12.023Z,1469119332.023 [BPC1] Communications Fault, FailCount= 9
2016-07-21T16:42:12.023Z,1469119332.023 [BPC1](ERROR): Communications Fault
2016-07-21T16:42:12.034Z,1469119332.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:12.051Z,1469119332.051 [CBIT](ERROR): Communications Fault in component: BPC1
2016-07-21T16:42:16.440Z,1469119336.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:16.464Z,1469119336.464 [DataOverHttps](INFO): Sending 136 bytes from file Logs/20160721T163925/Courier0000.lzma
2016-07-21T16:42:16.568Z,1469119336.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:16.916Z,1469119336.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:16.960Z,1469119336.960 [CBIT](INFO): Clearing failed state for component BPC1
2016-07-21T16:42:16.960Z,1469119336.960 [BPC1] No Fault, FailCount= 9
2016-07-21T16:42:19.710Z,1469119339.710 [DataOverHttps](INFO): Moved sent file to Logs/20160721T163925/Courier0000.lzma.bak
2016-07-21T16:42:19.710Z,1469119339.710 [DataOverHttps](INFO): SBD MOMSN=4352193
2016-07-21T16:42:19.836Z,1469119339.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:20.744Z,1469119340.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:20.910Z,1469119340.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:21.301Z,1469119341.301 [NavChartDb](INFO): Done scanning nodes of Resources/ElectronicNavigationCharts/US5CA83M.000
2016-07-21T16:42:21.325Z,1469119341.325 [NavChartDb](INFO): # of records loaded: 19732
2016-07-21T16:42:21.333Z,1469119341.333 [NavChartDb](IMPORTANT): Loaded Electronic Nav Chart data from US5CA83M.000
2016-07-21T16:42:21.401Z,1469119341.401 [NavChartDb](INFO): Setup scan of Resources/ElectronicNavigationCharts/US5CA62M.000
2016-07-21T16:42:25.851Z,1469119345.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:25.975Z,1469119345.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:26.364Z,1469119346.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:26.767Z,1469119346.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:27.158Z,1469119347.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:27.563Z,1469119347.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:30.337Z,1469119350.337 [NavChartDb](INFO): Done scanning features of Resources/ElectronicNavigationCharts/US5CA62M.000
2016-07-21T16:42:32.383Z,1469119352.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:32.455Z,1469119352.455 [DataOverHttps](INFO): Sending 18 bytes from file Logs/20160720T212229/Express0033.lzma
2016-07-21T16:42:32.553Z,1469119352.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:32.888Z,1469119352.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:33.206Z,1469119353.206 [DataOverHttps](INFO): Moved sent file to Logs/20160720T212229/Express0033.lzma.bak
2016-07-21T16:42:33.206Z,1469119353.206 [DataOverHttps](INFO): SBD MOMSN=4352198
2016-07-21T16:42:33.313Z,1469119353.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:34.201Z,1469119354.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:34.329Z,1469119354.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:40.203Z,1469119360.203 [BPC1](FAULT): Failed to initialize
2016-07-21T16:42:40.203Z,1469119360.203 [BPC1] Communications Fault, FailCount= 10
2016-07-21T16:42:40.203Z,1469119360.203 [BPC1](ERROR): Communications Fault
2016-07-21T16:42:40.245Z,1469119360.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:40.305Z,1469119360.305 [CBIT](ERROR): Communications Fault in component: BPC1
2016-07-21T16:42:40.305Z,1469119360.305 [CBIT](CRITICAL): Communications Fault in component: BPC1
2016-07-21T16:42:40.421Z,1469119360.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:40.788Z,1469119360.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:41.191Z,1469119361.191 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:41.191Z,1469119361.191 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2016-07-21T16:42:41.191Z,1469119361.191 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-07-21T16:42:41.193Z,1469119361.193 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:41.193Z,1469119361.193 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2016-07-21T16:42:41.193Z,1469119361.193 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2016-07-21T16:42:41.202Z,1469119361.202 [DeadReckonWithRespectToWater](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:41.202Z,1469119361.202 [DeadReckonWithRespectToWater] Software Fault, FailCount= 1
2016-07-21T16:42:41.202Z,1469119361.202 [DeadReckonWithRespectToWater](ERROR): Software Fault
2016-07-21T16:42:41.204Z,1469119361.204 [DeadReckonWithRespectToSeafloor](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:41.204Z,1469119361.204 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2016-07-21T16:42:41.205Z,1469119361.204 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-07-21T16:42:41.206Z,1469119361.206 [DeadReckonUsingDVLWaterTrack](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:41.206Z,1469119361.207 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2016-07-21T16:42:41.207Z,1469119361.207 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-07-21T16:42:41.286Z,1469119361.286 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-07-21T16:42:41.286Z,1469119361.286 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2016-07-21T16:42:41.287Z,1469119361.287 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToWater
2016-07-21T16:42:41.287Z,1469119361.287 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-07-21T16:42:41.287Z,1469119361.287 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-07-21T16:42:41.618Z,1469119361.618 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-07-21T16:42:41.618Z,1469119361.618 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2016-07-21T16:42:41.619Z,1469119361.619 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2016-07-21T16:42:41.619Z,1469119361.619 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2016-07-21T16:42:41.619Z,1469119361.619 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToWater
2016-07-21T16:42:41.619Z,1469119361.619 [DeadReckonWithRespectToWater] No Fault, FailCount= 1
2016-07-21T16:42:41.620Z,1469119361.620 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-07-21T16:42:41.620Z,1469119361.620 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2016-07-21T16:42:41.629Z,1469119361.629 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-07-21T16:42:41.629Z,1469119361.629 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2016-07-21T16:42:41.977Z,1469119361.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-07-21T16:42:41.978Z,1469119361.978 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-07-21T16:42:41.978Z,1469119361.978 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-07-21T16:42:41.979Z,1469119361.979 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2016-07-21T16:42:41.979Z,1469119361.979 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2016-07-21T16:42:41.979Z,1469119361.979 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2016-07-21T16:42:41.980Z,1469119361.980 [DeadReckonWithRespectToWater](DEBUG): Initializing DeadReckonWithRespectToWater component.
2016-07-21T16:42:41.980Z,1469119361.980 [DeadReckonWithRespectToWater](INFO): Will consider orientation measurement stale after 120s.
2016-07-21T16:42:41.985Z,1469119361.985 [DeadReckonWithRespectToWater](INFO): Will consider velocity measurement stale after 20s.
2016-07-21T16:42:41.986Z,1469119361.986 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-07-21T16:42:41.986Z,1469119361.986 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-07-21T16:42:41.986Z,1469119361.986 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-07-21T16:42:41.987Z,1469119361.987 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-07-21T16:42:41.987Z,1469119361.987 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-07-21T16:42:41.988Z,1469119361.988 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-07-21T16:42:47.638Z,1469119367.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-07-21T16:42:47.639Z,1469119367.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:47.728Z,1469119367.728 [DataOverHttps](INFO): Sending 1194 bytes from file Logs/20160721T163925/Express0001.lzma
2016-07-21T16:42:47.803Z,1469119367.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2016-07-21T16:42:47.804Z,1469119367.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:48.174Z,1469119368.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.0 s old, using for 20.0 s.
2016-07-21T16:42:48.175Z,1469119368.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:48.510Z,1469119368.510 [DataOverHttps](INFO): Moved sent file to Logs/20160721T163925/Express0001.lzma.bak
2016-07-21T16:42:48.510Z,1469119368.510 [DataOverHttps](INFO): SBD MOMSN=4352200
2016-07-21T16:42:48.594Z,1469119368.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.4 s old, using for 20.0 s.
2016-07-21T16:42:48.595Z,1469119368.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:49.395Z,1469119369.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.2 s old, using for 20.0 s.
2016-07-21T16:42:49.396Z,1469119369.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:49.409Z,1469119369.409 [Startup:StartupSatComms:B] Stopped
2016-07-21T16:42:49.409Z,1469119369.409 [Startup:StartupSatComms](INFO): Completed Startup:StartupSatComms
2016-07-21T16:42:49.409Z,1469119369.409 [Startup:StartupSatComms] Stopped
2016-07-21T16:42:49.409Z,1469119369.409 [Startup:StartupSatComms](DEBUG): Aggregate::uninitialize Startup:StartupSatComms
2016-07-21T16:42:49.410Z,1469119369.410 [Startup](INFO): Completed Startup
2016-07-21T16:42:49.410Z,1469119369.410 [Startup] Stopped
2016-07-21T16:42:49.410Z,1469119369.411 [Startup](DEBUG): Aggregate::uninitialize Startup
2016-07-21T16:42:49.411Z,1469119369.411 [Startup:A.GoToSurface] Stopped
2016-07-21T16:42:49.411Z,1469119369.411 [Startup:A.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2016-07-21T16:42:49.527Z,1469119369.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2016-07-21T16:42:49.528Z,1469119369.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:49.541Z,1469119369.541 [MissionManager](IMPORTANT): Started mission Default
2016-07-21T16:42:49.541Z,1469119369.541 [Default] Running Loop=1
2016-07-21T16:42:49.541Z,1469119369.541 [Default](DEBUG): Aggregate::initialize Default
2016-07-21T16:42:49.541Z,1469119369.542 [Default:B.GoToSurface] Running Loop=1
2016-07-21T16:42:49.542Z,1469119369.542 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2016-07-21T16:42:49.542Z,1469119369.542 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2016-07-21T16:42:49.542Z,1469119369.542 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2016-07-21T16:42:49.543Z,1469119369.543 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2016-07-21T16:42:49.543Z,1469119369.543 [Default:B.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds.
2016-07-21T16:42:49.543Z,1469119369.543 [Default:B.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2016-07-21T16:42:49.543Z,1469119369.543 [Default:A.Wait] Running Loop=1
2016-07-21T16:42:49.544Z,1469119369.543 [Default:A.Wait](DEBUG): Initialize Wait Component.
2016-07-21T16:42:51.974Z,1469119371.974 [NavChartDb](INFO): # of records loaded: 5000
2016-07-21T16:42:55.078Z,1469119375.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s.
2016-07-21T16:42:55.079Z,1469119375.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:55.245Z,1469119375.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2016-07-21T16:42:55.246Z,1469119375.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:55.610Z,1469119375.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2016-07-21T16:42:55.611Z,1469119375.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:56.026Z,1469119376.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2016-07-21T16:42:56.027Z,1469119376.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:56.391Z,1469119376.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2016-07-21T16:42:56.392Z,1469119376.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:56.798Z,1469119376.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2016-07-21T16:42:56.799Z,1469119376.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:57.199Z,1469119377.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2016-07-21T16:42:57.200Z,1469119377.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:57.595Z,1469119377.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2016-07-21T16:42:57.596Z,1469119377.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:58.014Z,1469119378.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2016-07-21T16:42:58.015Z,1469119378.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:58.399Z,1469119378.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2016-07-21T16:42:58.400Z,1469119378.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:58.786Z,1469119378.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2016-07-21T16:42:58.787Z,1469119378.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:59.184Z,1469119379.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2016-07-21T16:42:59.185Z,1469119379.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:42:59.598Z,1469119379.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2016-07-21T16:42:59.599Z,1469119379.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:00.003Z,1469119380.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2016-07-21T16:43:00.004Z,1469119380.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:00.407Z,1469119380.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2016-07-21T16:43:00.408Z,1469119380.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:00.826Z,1469119380.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2016-07-21T16:43:00.828Z,1469119380.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:01.229Z,1469119381.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:01.586Z,1469119381.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:02.002Z,1469119382.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:02.407Z,1469119382.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:02.806Z,1469119382.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:02.812Z,1469119382.812 [Default:A.Wait](INFO): Done Waiting.
2016-07-21T16:43:02.812Z,1469119382.812 [Default:A.Wait] Stopped
2016-07-21T16:43:02.812Z,1469119382.812 [Default:A.Wait](DEBUG): Uninitialize Wait Component.
2016-07-21T16:43:03.214Z,1469119383.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:03.220Z,1469119383.220 [Default:CheckIn] Running Loop=1
2016-07-21T16:43:03.220Z,1469119383.220 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-07-21T16:43:03.220Z,1469119383.220 [Default:CheckIn:Read_GPS] Running Loop=1
2016-07-21T16:43:03.595Z,1469119383.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:03.613Z,1469119383.613 [Default:CheckIn:Read_GPS](DEBUG): Initialize ReadDataComponent to sense time_fix
2016-07-21T16:43:04.004Z,1469119384.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:04.406Z,1469119384.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:04.808Z,1469119384.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:05.214Z,1469119385.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:05.622Z,1469119385.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:06.027Z,1469119386.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:06.408Z,1469119386.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:06.803Z,1469119386.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:07.180Z,1469119387.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:07.601Z,1469119387.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:07.923Z,1469119387.923 [NavChartDb](INFO): # of records loaded: 10000
2016-07-21T16:43:08.040Z,1469119388.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:08.390Z,1469119388.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:08.791Z,1469119388.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:09.190Z,1469119389.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:09.599Z,1469119389.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:10.013Z,1469119390.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:10.418Z,1469119390.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:10.799Z,1469119390.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:11.223Z,1469119391.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:11.599Z,1469119391.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:11.999Z,1469119391.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:12.399Z,1469119392.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:12.799Z,1469119392.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:13.210Z,1469119393.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:13.603Z,1469119393.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:14.008Z,1469119394.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:14.403Z,1469119394.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:14.803Z,1469119394.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:15.212Z,1469119395.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:15.606Z,1469119395.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:16.003Z,1469119396.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:16.405Z,1469119396.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:16.805Z,1469119396.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:17.179Z,1469119397.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:17.599Z,1469119397.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:17.987Z,1469119397.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:18.398Z,1469119398.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:18.796Z,1469119398.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:19.198Z,1469119399.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:19.604Z,1469119399.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:20.005Z,1469119400.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:20.407Z,1469119400.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:20.827Z,1469119400.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:21.219Z,1469119401.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:21.615Z,1469119401.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:21.671Z,1469119401.671 [NavChartDb](INFO): # of records loaded: 15000
2016-07-21T16:43:22.011Z,1469119402.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:22.394Z,1469119402.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:22.800Z,1469119402.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:23.184Z,1469119403.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:23.603Z,1469119403.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:23.992Z,1469119403.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:24.388Z,1469119404.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:24.802Z,1469119404.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:25.205Z,1469119405.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:25.609Z,1469119405.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:26.004Z,1469119406.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:26.435Z,1469119406.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:26.817Z,1469119406.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:27.213Z,1469119407.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:27.611Z,1469119407.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:28.015Z,1469119408.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:28.410Z,1469119408.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:28.780Z,1469119408.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:29.184Z,1469119409.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:29.586Z,1469119409.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:29.980Z,1469119409.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:30.387Z,1469119410.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:30.780Z,1469119410.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:31.216Z,1469119411.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:31.596Z,1469119411.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:31.991Z,1469119411.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:32.403Z,1469119412.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:32.795Z,1469119412.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:33.173Z,1469119413.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:33.595Z,1469119413.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:33.998Z,1469119413.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:34.382Z,1469119414.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:34.830Z,1469119414.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:35.227Z,1469119415.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:35.594Z,1469119415.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:36.016Z,1469119416.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:36.423Z,1469119416.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:36.814Z,1469119416.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:37.218Z,1469119417.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:37.595Z,1469119417.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:38.014Z,1469119418.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:38.391Z,1469119418.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:38.826Z,1469119418.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:39.187Z,1469119419.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:39.595Z,1469119419.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:39.984Z,1469119419.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:40.384Z,1469119420.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:40.790Z,1469119420.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:41.184Z,1469119421.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:41.606Z,1469119421.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:41.997Z,1469119421.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:42.399Z,1469119422.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:42.805Z,1469119422.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:43.120Z,1469119423.120 [NavChartDb](INFO): # of records loaded: 20000
2016-07-21T16:43:43.217Z,1469119423.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:43.615Z,1469119423.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:44.014Z,1469119424.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:44.395Z,1469119424.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:44.788Z,1469119424.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:45.188Z,1469119425.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:45.593Z,1469119425.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:46.004Z,1469119426.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:46.399Z,1469119426.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:46.806Z,1469119426.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:47.215Z,1469119427.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:47.625Z,1469119427.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:47.988Z,1469119427.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:48.388Z,1469119428.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:48.799Z,1469119428.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:49.199Z,1469119429.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:49.596Z,1469119429.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:49.999Z,1469119430.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:55.566Z,1469119435.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:55.691Z,1469119435.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:56.091Z,1469119436.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:56.488Z,1469119436.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:56.855Z,1469119436.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:57.256Z,1469119437.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:57.664Z,1469119437.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:58.071Z,1469119438.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:58.478Z,1469119438.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:58.883Z,1469119438.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:59.275Z,1469119439.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:43:59.662Z,1469119439.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:00.062Z,1469119440.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:00.472Z,1469119440.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:00.872Z,1469119440.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:01.285Z,1469119441.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:01.684Z,1469119441.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:02.063Z,1469119442.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:02.221Z,1469119442.221 [NavChartDb](INFO): # of records loaded: 25000
2016-07-21T16:44:02.463Z,1469119442.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:02.883Z,1469119442.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:03.282Z,1469119443.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:03.689Z,1469119443.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:04.087Z,1469119444.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:04.454Z,1469119444.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:04.867Z,1469119444.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:05.291Z,1469119445.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:05.700Z,1469119445.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:06.091Z,1469119446.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:06.479Z,1469119446.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:06.902Z,1469119446.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:07.283Z,1469119447.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:07.654Z,1469119447.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:08.057Z,1469119448.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:08.458Z,1469119448.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:08.894Z,1469119448.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:09.291Z,1469119449.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:09.688Z,1469119449.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:10.090Z,1469119450.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:10.462Z,1469119450.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:10.900Z,1469119450.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:11.315Z,1469119451.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:11.708Z,1469119451.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:11.896Z,1469119451.896 [NavChartDb](INFO): Calculating coverage of Resources/ElectronicNavigationCharts/US5CA62M.000
2016-07-21T16:44:12.079Z,1469119452.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:12.474Z,1469119452.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:12.883Z,1469119452.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:13.269Z,1469119453.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:13.673Z,1469119453.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:14.087Z,1469119454.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:14.479Z,1469119454.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:14.873Z,1469119454.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:15.287Z,1469119455.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:15.683Z,1469119455.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:16.086Z,1469119456.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:16.474Z,1469119456.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:16.900Z,1469119456.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:17.302Z,1469119457.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:17.675Z,1469119457.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:18.071Z,1469119458.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:18.483Z,1469119458.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:18.870Z,1469119458.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:19.264Z,1469119459.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:19.678Z,1469119459.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:19.744Z,1469119459.744 [NavChartDb](INFO): Done scanning edges of Resources/ElectronicNavigationCharts/US5CA62M.000
2016-07-21T16:44:20.007Z,1469119460.007 [NavChartDb](INFO): # of records loaded: 30000
2016-07-21T16:44:20.094Z,1469119460.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:20.479Z,1469119460.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:20.854Z,1469119460.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:21.291Z,1469119461.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:21.676Z,1469119461.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:22.086Z,1469119462.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:22.488Z,1469119462.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:22.883Z,1469119462.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:23.289Z,1469119463.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:23.690Z,1469119463.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:24.064Z,1469119464.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:24.474Z,1469119464.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:24.862Z,1469119464.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:25.271Z,1469119465.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:25.674Z,1469119465.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:26.063Z,1469119466.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:26.487Z,1469119466.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:26.883Z,1469119466.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:27.294Z,1469119467.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:27.682Z,1469119467.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:28.096Z,1469119468.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:28.488Z,1469119468.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:28.873Z,1469119468.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:29.278Z,1469119469.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:29.680Z,1469119469.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:30.066Z,1469119470.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:30.479Z,1469119470.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:30.882Z,1469119470.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:31.263Z,1469119471.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:31.671Z,1469119471.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:32.085Z,1469119472.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:32.473Z,1469119472.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:32.886Z,1469119472.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:33.281Z,1469119473.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:33.663Z,1469119473.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:34.066Z,1469119474.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:34.494Z,1469119474.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:34.869Z,1469119474.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:35.278Z,1469119475.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:35.699Z,1469119475.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:36.064Z,1469119476.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:36.466Z,1469119476.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:36.887Z,1469119476.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:37.272Z,1469119477.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:37.691Z,1469119477.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:38.095Z,1469119478.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:38.469Z,1469119478.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:38.864Z,1469119478.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:39.283Z,1469119479.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:39.668Z,1469119479.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:40.083Z,1469119480.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:40.467Z,1469119480.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:40.873Z,1469119480.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:41.282Z,1469119481.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:41.655Z,1469119481.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:42.087Z,1469119482.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:42.498Z,1469119482.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:42.855Z,1469119482.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:44:42.872Z,1469119482.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:43.251Z,1469119483.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:44:43.268Z,1469119483.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:43.639Z,1469119483.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:44:43.670Z,1469119483.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:44.039Z,1469119484.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:44:44.069Z,1469119484.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:44.440Z,1469119484.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:44:44.467Z,1469119484.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:44.866Z,1469119484.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:44:44.885Z,1469119484.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:45.258Z,1469119485.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:44:45.287Z,1469119485.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:45.645Z,1469119485.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:44:45.676Z,1469119485.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:45.978Z,1469119485.978 [NavChartDb](INFO): # of records loaded: 35000
2016-07-21T16:44:46.039Z,1469119486.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:44:46.057Z,1469119486.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:46.446Z,1469119486.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:44:46.487Z,1469119486.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:46.844Z,1469119486.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:44:46.883Z,1469119486.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:47.250Z,1469119487.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:44:47.286Z,1469119487.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:47.662Z,1469119487.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:44:47.689Z,1469119487.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:48.050Z,1469119488.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:44:48.075Z,1469119488.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:48.450Z,1469119488.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:44:48.503Z,1469119488.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:48.848Z,1469119488.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:44:48.870Z,1469119488.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:49.240Z,1469119489.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:44:49.281Z,1469119489.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:49.649Z,1469119489.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:44:49.672Z,1469119489.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:50.044Z,1469119490.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:44:50.074Z,1469119490.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:57.054Z,1469119497.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:44:57.101Z,1469119497.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:57.202Z,1469119497.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:44:57.225Z,1469119497.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:57.601Z,1469119497.602 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-07-21T16:44:57.620Z,1469119497.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:44:57.636Z,1469119497.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:57.971Z,1469119497.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:44:58.022Z,1469119498.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:58.377Z,1469119498.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:44:58.422Z,1469119498.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:58.781Z,1469119498.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:44:58.823Z,1469119498.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:59.177Z,1469119499.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:44:59.220Z,1469119499.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:59.566Z,1469119499.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:44:59.581Z,1469119499.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:44:59.968Z,1469119499.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:44:59.986Z,1469119499.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:00.368Z,1469119500.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:00.391Z,1469119500.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:00.767Z,1469119500.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:00.782Z,1469119500.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:01.168Z,1469119501.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:01.183Z,1469119501.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:01.582Z,1469119501.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:01.615Z,1469119501.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:02.008Z,1469119502.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:02.024Z,1469119502.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:02.388Z,1469119502.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:02.407Z,1469119502.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:02.767Z,1469119502.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:02.803Z,1469119502.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:03.167Z,1469119503.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:03.203Z,1469119503.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:03.577Z,1469119503.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:03.596Z,1469119503.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:03.968Z,1469119503.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:03.998Z,1469119503.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:04.384Z,1469119504.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:04.399Z,1469119504.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:04.790Z,1469119504.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:04.815Z,1469119504.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:05.193Z,1469119505.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:05.223Z,1469119505.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:05.497Z,1469119505.497 [NavChartDb](INFO): Done scanning nodes of Resources/ElectronicNavigationCharts/US5CA62M.000
2016-07-21T16:45:05.524Z,1469119505.524 [NavChartDb](INFO): # of records loaded: 37376
2016-07-21T16:45:05.534Z,1469119505.534 [NavChartDb](IMPORTANT): Loaded Electronic Nav Chart data from US5CA62M.000
2016-07-21T16:45:05.566Z,1469119505.566 [NavChartDb](INFO): Setup scan of Resources/ElectronicNavigationCharts/US5CA61M.000
2016-07-21T16:45:05.591Z,1469119505.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:05.624Z,1469119505.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:05.986Z,1469119505.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:06.019Z,1469119506.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:06.376Z,1469119506.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:06.415Z,1469119506.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:06.781Z,1469119506.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:06.823Z,1469119506.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:07.180Z,1469119507.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:07.224Z,1469119507.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:07.580Z,1469119507.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:07.603Z,1469119507.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:07.990Z,1469119507.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:08.031Z,1469119508.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:08.383Z,1469119508.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:08.402Z,1469119508.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:08.774Z,1469119508.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:08.791Z,1469119508.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:09.190Z,1469119509.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:09.205Z,1469119509.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:09.593Z,1469119509.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:09.608Z,1469119509.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:09.963Z,1469119509.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:10.000Z,1469119510.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:10.401Z,1469119510.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:10.415Z,1469119510.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:10.803Z,1469119510.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:10.818Z,1469119510.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:11.178Z,1469119511.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:11.209Z,1469119511.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:11.601Z,1469119511.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:11.631Z,1469119511.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:11.973Z,1469119511.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:11.999Z,1469119512.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:12.373Z,1469119512.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:12.393Z,1469119512.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:12.788Z,1469119512.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:12.803Z,1469119512.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:13.067Z,1469119513.067 [NavChartDb](INFO): Done scanning features of Resources/ElectronicNavigationCharts/US5CA61M.000
2016-07-21T16:45:13.168Z,1469119513.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:13.194Z,1469119513.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:13.575Z,1469119513.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:13.607Z,1469119513.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:13.983Z,1469119513.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:14.007Z,1469119514.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:14.374Z,1469119514.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:14.406Z,1469119514.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:14.767Z,1469119514.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:14.797Z,1469119514.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:15.188Z,1469119515.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:15.203Z,1469119515.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:15.572Z,1469119515.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:15.591Z,1469119515.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:15.974Z,1469119515.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:15.999Z,1469119515.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:16.384Z,1469119516.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:16.399Z,1469119516.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:16.787Z,1469119516.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:16.807Z,1469119516.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:17.185Z,1469119517.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:17.200Z,1469119517.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:17.567Z,1469119517.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:17.611Z,1469119517.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:17.976Z,1469119517.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:18.016Z,1469119518.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:18.368Z,1469119518.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:18.413Z,1469119518.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:18.768Z,1469119518.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:18.819Z,1469119518.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:19.168Z,1469119519.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:19.215Z,1469119519.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:19.578Z,1469119519.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:19.617Z,1469119519.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:19.982Z,1469119519.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:20.016Z,1469119520.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:20.386Z,1469119520.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:20.424Z,1469119520.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:20.777Z,1469119520.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:20.800Z,1469119520.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:21.172Z,1469119521.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:21.202Z,1469119521.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:21.574Z,1469119521.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:21.588Z,1469119521.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:21.975Z,1469119521.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:22.003Z,1469119522.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:22.406Z,1469119522.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:22.428Z,1469119522.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:22.786Z,1469119522.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:22.803Z,1469119522.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:23.183Z,1469119523.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:23.207Z,1469119523.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:23.581Z,1469119523.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:23.624Z,1469119523.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:23.982Z,1469119523.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:24.014Z,1469119524.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:24.375Z,1469119524.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:24.420Z,1469119524.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:24.771Z,1469119524.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:24.811Z,1469119524.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:25.167Z,1469119525.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:25.218Z,1469119525.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:25.578Z,1469119525.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:25.623Z,1469119525.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:25.981Z,1469119525.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:26.047Z,1469119526.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:26.377Z,1469119526.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:26.424Z,1469119526.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:26.768Z,1469119526.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:26.813Z,1469119526.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:27.167Z,1469119527.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:27.183Z,1469119527.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:27.568Z,1469119527.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:27.608Z,1469119527.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:27.981Z,1469119527.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:28.012Z,1469119528.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:28.378Z,1469119528.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:28.419Z,1469119528.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:28.782Z,1469119528.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:28.818Z,1469119528.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:29.191Z,1469119529.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:29.237Z,1469119529.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:29.575Z,1469119529.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:29.622Z,1469119529.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:29.970Z,1469119529.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:30.019Z,1469119530.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:30.376Z,1469119530.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:30.396Z,1469119530.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:30.774Z,1469119530.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:30.803Z,1469119530.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:31.174Z,1469119531.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:31.202Z,1469119531.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:31.578Z,1469119531.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:31.599Z,1469119531.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:32.018Z,1469119532.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:32.046Z,1469119532.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:32.384Z,1469119532.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:32.410Z,1469119532.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:32.774Z,1469119532.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:32.799Z,1469119532.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:33.005Z,1469119533.006 [NavChartDb](INFO): # of records loaded: 5000
2016-07-21T16:45:33.167Z,1469119533.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:33.202Z,1469119533.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:33.577Z,1469119533.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:33.607Z,1469119533.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:33.968Z,1469119533.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:33.991Z,1469119533.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:34.385Z,1469119534.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:34.424Z,1469119534.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:34.788Z,1469119534.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:34.839Z,1469119534.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:35.185Z,1469119535.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:35.200Z,1469119535.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:35.568Z,1469119535.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:35.606Z,1469119535.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:35.968Z,1469119535.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:36.009Z,1469119536.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:36.368Z,1469119536.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:36.403Z,1469119536.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:36.767Z,1469119536.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:36.799Z,1469119536.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:37.184Z,1469119537.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:37.202Z,1469119537.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:37.582Z,1469119537.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:37.607Z,1469119537.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:37.978Z,1469119537.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:38.002Z,1469119538.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:38.368Z,1469119538.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:38.382Z,1469119538.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:38.768Z,1469119538.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:38.813Z,1469119538.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:39.168Z,1469119539.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:39.221Z,1469119539.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:39.568Z,1469119539.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:39.599Z,1469119539.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:39.974Z,1469119539.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:39.999Z,1469119539.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:40.379Z,1469119540.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:40.403Z,1469119540.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:40.784Z,1469119540.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:40.811Z,1469119540.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:41.184Z,1469119541.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:41.211Z,1469119541.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:41.574Z,1469119541.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:41.595Z,1469119541.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:41.968Z,1469119541.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:42.006Z,1469119542.006 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:42.007Z,1469119542.007 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2016-07-21T16:45:42.007Z,1469119542.007 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-07-21T16:45:42.009Z,1469119542.009 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:42.009Z,1469119542.009 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2016-07-21T16:45:42.009Z,1469119542.009 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2016-07-21T16:45:42.051Z,1469119542.051 [DeadReckonWithRespectToWater](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:42.051Z,1469119542.051 [DeadReckonWithRespectToWater] Software Fault, FailCount= 2
2016-07-21T16:45:42.051Z,1469119542.051 [DeadReckonWithRespectToWater](ERROR): Software Fault
2016-07-21T16:45:42.053Z,1469119542.053 [DeadReckonWithRespectToSeafloor](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:42.053Z,1469119542.053 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2016-07-21T16:45:42.054Z,1469119542.053 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-07-21T16:45:42.059Z,1469119542.059 [DeadReckonUsingDVLWaterTrack](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:42.059Z,1469119542.059 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2016-07-21T16:45:42.059Z,1469119542.059 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-07-21T16:45:42.106Z,1469119542.106 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-07-21T16:45:42.107Z,1469119542.107 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2016-07-21T16:45:42.107Z,1469119542.107 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToWater
2016-07-21T16:45:42.107Z,1469119542.107 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-07-21T16:45:42.107Z,1469119542.107 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-07-21T16:45:42.368Z,1469119542.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:42.436Z,1469119542.436 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-07-21T16:45:42.436Z,1469119542.436 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2016-07-21T16:45:42.453Z,1469119542.453 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2016-07-21T16:45:42.453Z,1469119542.453 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2016-07-21T16:45:42.454Z,1469119542.454 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToWater
2016-07-21T16:45:42.454Z,1469119542.454 [DeadReckonWithRespectToWater] No Fault, FailCount= 2
2016-07-21T16:45:42.454Z,1469119542.454 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-07-21T16:45:42.454Z,1469119542.454 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2016-07-21T16:45:42.455Z,1469119542.455 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-07-21T16:45:42.455Z,1469119542.455 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2016-07-21T16:45:42.768Z,1469119542.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:42.794Z,1469119542.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-07-21T16:45:42.795Z,1469119542.795 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-07-21T16:45:42.795Z,1469119542.795 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-07-21T16:45:42.795Z,1469119542.796 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2016-07-21T16:45:42.796Z,1469119542.796 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2016-07-21T16:45:42.796Z,1469119542.796 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2016-07-21T16:45:42.837Z,1469119542.837 [DeadReckonWithRespectToWater](DEBUG): Initializing DeadReckonWithRespectToWater component.
2016-07-21T16:45:42.837Z,1469119542.837 [DeadReckonWithRespectToWater](INFO): Will consider orientation measurement stale after 120s.
2016-07-21T16:45:42.838Z,1469119542.838 [DeadReckonWithRespectToWater](INFO): Will consider velocity measurement stale after 20s.
2016-07-21T16:45:42.838Z,1469119542.838 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-07-21T16:45:42.839Z,1469119542.839 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-07-21T16:45:42.839Z,1469119542.839 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-07-21T16:45:42.839Z,1469119542.839 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-07-21T16:45:42.840Z,1469119542.840 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-07-21T16:45:42.840Z,1469119542.840 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-07-21T16:45:43.185Z,1469119543.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:43.215Z,1469119543.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-07-21T16:45:43.216Z,1469119543.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:43.588Z,1469119543.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:43.614Z,1469119543.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-07-21T16:45:43.615Z,1469119543.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:44.003Z,1469119544.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:44.046Z,1469119544.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-07-21T16:45:44.047Z,1469119544.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:44.372Z,1469119544.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:44.418Z,1469119544.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-07-21T16:45:44.419Z,1469119544.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:44.570Z,1469119544.570 [NavChartDb](INFO): # of records loaded: 10000
2016-07-21T16:45:44.768Z,1469119544.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:44.784Z,1469119544.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-07-21T16:45:44.801Z,1469119544.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:45.168Z,1469119545.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:45.212Z,1469119545.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-07-21T16:45:45.217Z,1469119545.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:45.572Z,1469119545.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:45.602Z,1469119545.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-07-21T16:45:45.603Z,1469119545.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:45.975Z,1469119545.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:45.998Z,1469119545.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-07-21T16:45:45.999Z,1469119545.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:46.396Z,1469119546.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:46.414Z,1469119546.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-07-21T16:45:46.415Z,1469119546.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:46.789Z,1469119546.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:46.835Z,1469119546.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-07-21T16:45:46.836Z,1469119546.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:47.186Z,1469119547.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:47.204Z,1469119547.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-07-21T16:45:47.209Z,1469119547.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:47.568Z,1469119547.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:47.595Z,1469119547.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-07-21T16:45:47.596Z,1469119547.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:47.968Z,1469119547.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:48.005Z,1469119548.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-07-21T16:45:48.006Z,1469119548.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:48.368Z,1469119548.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:48.395Z,1469119548.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-07-21T16:45:48.396Z,1469119548.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:48.768Z,1469119548.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:48.792Z,1469119548.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-07-21T16:45:48.794Z,1469119548.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:48.870Z,1469119548.870 [CommandLine](IMPORTANT): got command failComponent
2016-07-21T16:45:48.870Z,1469119548.870 [CommandLine](IMPORTANT): Failed components:
2016-07-21T16:45:48.870Z,1469119548.870 [CommandLine](IMPORTANT): DropWeight: Hardware Fault
2016-07-21T16:45:48.870Z,1469119548.870 [CommandLine](IMPORTANT): Rowe_600LCM: Hardware Fault
2016-07-21T16:45:48.871Z,1469119548.871 [CommandLine](IMPORTANT): BPC1: Communications Fault
2016-07-21T16:45:49.179Z,1469119549.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:49.218Z,1469119549.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2016-07-21T16:45:49.219Z,1469119549.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:49.583Z,1469119549.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:49.618Z,1469119549.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2016-07-21T16:45:49.619Z,1469119549.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:50.011Z,1469119550.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:50.034Z,1469119550.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2016-07-21T16:45:50.035Z,1469119550.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:50.370Z,1469119550.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:50.386Z,1469119550.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2016-07-21T16:45:50.387Z,1469119550.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:55.314Z,1469119555.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:55.379Z,1469119555.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.4 s old, using for 20.0 s.
2016-07-21T16:45:55.380Z,1469119555.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:55.515Z,1469119555.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:55.527Z,1469119555.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.5 s old, using for 20.0 s.
2016-07-21T16:45:55.528Z,1469119555.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:55.906Z,1469119555.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:55.922Z,1469119555.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s.
2016-07-21T16:45:55.923Z,1469119555.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:56.322Z,1469119556.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:56.365Z,1469119556.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2016-07-21T16:45:56.366Z,1469119556.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:56.706Z,1469119556.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:56.738Z,1469119556.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2016-07-21T16:45:56.739Z,1469119556.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:57.096Z,1469119557.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:57.134Z,1469119557.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s.
2016-07-21T16:45:57.135Z,1469119557.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:57.497Z,1469119557.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:57.524Z,1469119557.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s.
2016-07-21T16:45:57.529Z,1469119557.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:57.903Z,1469119557.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:57.936Z,1469119557.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s.
2016-07-21T16:45:57.937Z,1469119557.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:58.088Z,1469119558.088 [NavChartDb](INFO): Calculating coverage of Resources/ElectronicNavigationCharts/US5CA61M.000
2016-07-21T16:45:58.310Z,1469119558.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:58.346Z,1469119558.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s.
2016-07-21T16:45:58.347Z,1469119558.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:58.727Z,1469119558.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:58.749Z,1469119558.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s.
2016-07-21T16:45:58.750Z,1469119558.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:59.132Z,1469119559.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:59.153Z,1469119559.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s.
2016-07-21T16:45:59.154Z,1469119559.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:59.527Z,1469119559.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:59.553Z,1469119559.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s.
2016-07-21T16:45:59.554Z,1469119559.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:45:59.913Z,1469119559.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:45:59.955Z,1469119559.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s.
2016-07-21T16:45:59.956Z,1469119559.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:00.121Z,1469119560.121 [NavChartDb](INFO): Done scanning edges of Resources/ElectronicNavigationCharts/US5CA61M.000
2016-07-21T16:46:00.309Z,1469119560.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:00.375Z,1469119560.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2016-07-21T16:46:00.376Z,1469119560.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:00.710Z,1469119560.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:00.726Z,1469119560.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2016-07-21T16:46:00.727Z,1469119560.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:01.102Z,1469119561.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:01.126Z,1469119561.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2016-07-21T16:46:01.127Z,1469119561.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:01.526Z,1469119561.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:01.542Z,1469119561.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2016-07-21T16:46:01.543Z,1469119561.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:01.915Z,1469119561.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:01.942Z,1469119561.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2016-07-21T16:46:01.943Z,1469119561.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:02.083Z,1469119562.082 [NavChartDb](INFO): # of records loaded: 15000
2016-07-21T16:46:02.312Z,1469119562.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:02.339Z,1469119562.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:02.695Z,1469119562.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:02.736Z,1469119562.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:03.115Z,1469119563.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:03.134Z,1469119563.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:03.502Z,1469119563.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:03.537Z,1469119563.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:03.908Z,1469119563.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:03.939Z,1469119563.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:04.338Z,1469119564.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:04.355Z,1469119564.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:04.710Z,1469119564.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:04.743Z,1469119564.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:05.119Z,1469119565.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:05.158Z,1469119565.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:05.504Z,1469119565.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:05.518Z,1469119565.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:05.898Z,1469119565.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:05.912Z,1469119565.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:06.305Z,1469119566.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:06.352Z,1469119566.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:06.702Z,1469119566.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:06.717Z,1469119566.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:07.102Z,1469119567.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:07.127Z,1469119567.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:07.538Z,1469119567.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:07.560Z,1469119567.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:07.939Z,1469119567.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:07.963Z,1469119567.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:08.312Z,1469119568.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:08.336Z,1469119568.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:08.695Z,1469119568.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:08.734Z,1469119568.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:09.124Z,1469119569.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:09.147Z,1469119569.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:09.510Z,1469119569.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:09.536Z,1469119569.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:09.913Z,1469119569.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:09.933Z,1469119569.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:10.329Z,1469119570.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:10.346Z,1469119570.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:10.729Z,1469119570.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:10.744Z,1469119570.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:11.130Z,1469119571.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:11.147Z,1469119571.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:11.510Z,1469119571.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:11.550Z,1469119571.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:11.908Z,1469119571.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:11.927Z,1469119571.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:12.313Z,1469119572.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:12.335Z,1469119572.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:12.714Z,1469119572.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:12.736Z,1469119572.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:13.104Z,1469119573.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:13.130Z,1469119573.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:13.523Z,1469119573.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:13.539Z,1469119573.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:13.929Z,1469119573.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:13.944Z,1469119573.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:14.310Z,1469119574.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:14.338Z,1469119574.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:14.708Z,1469119574.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:14.741Z,1469119574.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:15.108Z,1469119575.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:15.151Z,1469119575.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:15.510Z,1469119575.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:15.531Z,1469119575.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:15.917Z,1469119575.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:15.937Z,1469119575.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:16.324Z,1469119576.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:16.340Z,1469119576.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:16.727Z,1469119576.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:16.748Z,1469119576.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:17.124Z,1469119577.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:17.140Z,1469119577.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:17.508Z,1469119577.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:17.545Z,1469119577.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:17.878Z,1469119577.878 [NavChartDb](INFO): Done scanning nodes of Resources/ElectronicNavigationCharts/US5CA61M.000
2016-07-21T16:46:17.908Z,1469119577.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:17.947Z,1469119577.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:18.116Z,1469119578.116 [NavChartDb](INFO): # of records loaded: 16998
2016-07-21T16:46:18.127Z,1469119578.127 [NavChartDb](IMPORTANT): Loaded Electronic Nav Chart data from US5CA61M.000
2016-07-21T16:46:18.128Z,1469119578.128 [NavChartDb](INFO): Setup scan of Resources/ElectronicNavigationCharts/US5CA50M.000
2016-07-21T16:46:18.295Z,1469119578.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:18.323Z,1469119578.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:18.696Z,1469119578.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:18.721Z,1469119578.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:19.092Z,1469119579.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:19.116Z,1469119579.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:19.513Z,1469119579.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:19.528Z,1469119579.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:19.916Z,1469119579.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:19.947Z,1469119579.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:20.313Z,1469119580.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:20.328Z,1469119580.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:20.695Z,1469119580.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:20.726Z,1469119580.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:21.095Z,1469119581.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:21.127Z,1469119581.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:21.492Z,1469119581.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:21.541Z,1469119581.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:21.895Z,1469119581.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:21.924Z,1469119581.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:22.301Z,1469119582.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:22.326Z,1469119582.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:22.713Z,1469119582.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:22.727Z,1469119582.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:23.112Z,1469119583.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:23.127Z,1469119583.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:23.259Z,1469119583.259 [NavChartDb](INFO): Done scanning features of Resources/ElectronicNavigationCharts/US5CA50M.000
2016-07-21T16:46:23.491Z,1469119583.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:23.528Z,1469119583.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:23.895Z,1469119583.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:23.925Z,1469119583.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:24.314Z,1469119584.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:24.350Z,1469119584.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:24.691Z,1469119584.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:24.728Z,1469119584.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:25.102Z,1469119585.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:25.126Z,1469119585.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:25.516Z,1469119585.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:25.545Z,1469119585.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:25.906Z,1469119585.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:25.942Z,1469119585.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:26.296Z,1469119586.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:26.331Z,1469119586.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:26.695Z,1469119586.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:26.743Z,1469119586.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:27.096Z,1469119587.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:27.142Z,1469119587.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:27.495Z,1469119587.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:27.522Z,1469119587.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:27.902Z,1469119587.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:27.918Z,1469119587.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:28.315Z,1469119588.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:28.343Z,1469119588.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:28.715Z,1469119588.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:28.739Z,1469119588.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:29.106Z,1469119589.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:29.154Z,1469119589.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:29.495Z,1469119589.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:29.533Z,1469119589.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:29.895Z,1469119589.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:29.934Z,1469119589.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:30.296Z,1469119590.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:30.331Z,1469119590.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:30.696Z,1469119590.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:30.743Z,1469119590.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:31.102Z,1469119591.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:31.131Z,1469119591.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:31.517Z,1469119591.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:31.541Z,1469119591.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:31.925Z,1469119591.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:31.950Z,1469119591.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:32.298Z,1469119592.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:32.331Z,1469119592.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:32.702Z,1469119592.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:32.729Z,1469119592.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:33.103Z,1469119593.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:33.118Z,1469119593.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:33.496Z,1469119593.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:33.536Z,1469119593.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:33.925Z,1469119593.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:33.950Z,1469119593.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:34.302Z,1469119594.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:34.338Z,1469119594.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:34.717Z,1469119594.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:34.736Z,1469119594.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:35.123Z,1469119595.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:35.150Z,1469119595.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:35.496Z,1469119595.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:35.540Z,1469119595.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:35.896Z,1469119595.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:35.929Z,1469119595.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:36.296Z,1469119596.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:36.310Z,1469119596.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:36.696Z,1469119596.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:36.710Z,1469119596.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:37.121Z,1469119597.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:37.155Z,1469119597.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:37.510Z,1469119597.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:37.530Z,1469119597.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:37.914Z,1469119597.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:37.951Z,1469119597.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:38.304Z,1469119598.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:38.324Z,1469119598.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:38.704Z,1469119598.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:38.753Z,1469119598.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:39.101Z,1469119599.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:39.130Z,1469119599.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:39.287Z,1469119599.287 [NavChartDb](INFO): # of records loaded: 5000
2016-07-21T16:46:39.503Z,1469119599.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:39.527Z,1469119599.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:39.906Z,1469119599.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:39.934Z,1469119599.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:40.312Z,1469119600.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:40.359Z,1469119600.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:40.715Z,1469119600.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:40.759Z,1469119600.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:41.112Z,1469119601.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:41.144Z,1469119601.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:41.496Z,1469119601.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:41.537Z,1469119601.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:41.896Z,1469119601.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:41.935Z,1469119601.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:42.296Z,1469119602.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:42.335Z,1469119602.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:42.696Z,1469119602.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:42.743Z,1469119602.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:43.106Z,1469119603.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:43.139Z,1469119603.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:43.511Z,1469119603.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:43.535Z,1469119603.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:43.906Z,1469119603.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:43.942Z,1469119603.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:44.296Z,1469119604.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:44.339Z,1469119604.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:44.696Z,1469119604.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:44.710Z,1469119604.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:45.094Z,1469119605.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:45.123Z,1469119605.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:45.496Z,1469119605.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:45.515Z,1469119605.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:45.914Z,1469119605.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:45.962Z,1469119605.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:46.312Z,1469119606.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:46.351Z,1469119606.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:46.710Z,1469119606.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:46.735Z,1469119606.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:47.112Z,1469119607.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:47.138Z,1469119607.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:47.503Z,1469119607.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:47.518Z,1469119607.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:47.896Z,1469119607.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:47.933Z,1469119607.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:48.296Z,1469119608.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:48.335Z,1469119608.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:48.518Z,1469119608.519 [NavChartDb](INFO): # of records loaded: 10000
2016-07-21T16:46:48.696Z,1469119608.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:48.710Z,1469119608.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:49.107Z,1469119609.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:49.139Z,1469119609.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:49.511Z,1469119609.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:49.543Z,1469119609.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:49.906Z,1469119609.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:49.930Z,1469119609.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:50.304Z,1469119610.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:50.327Z,1469119610.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:50.703Z,1469119610.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:50.727Z,1469119610.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:56.907Z,1469119616.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:56.934Z,1469119616.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:57.059Z,1469119617.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:57.105Z,1469119617.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:57.448Z,1469119617.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-07-21T16:46:57.483Z,1469119617.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:57.887Z,1469119617.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:58.267Z,1469119618.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:58.666Z,1469119618.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:58.925Z,1469119618.925 [NavChartDb](INFO): # of records loaded: 15000
2016-07-21T16:46:59.072Z,1469119619.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:59.473Z,1469119619.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:46:59.870Z,1469119619.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:00.278Z,1469119620.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:00.677Z,1469119620.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:01.078Z,1469119621.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:01.446Z,1469119621.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:01.868Z,1469119621.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:02.277Z,1469119622.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:02.651Z,1469119622.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:03.081Z,1469119623.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:03.487Z,1469119623.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:03.887Z,1469119623.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:04.280Z,1469119624.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:04.659Z,1469119624.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:05.058Z,1469119625.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:05.455Z,1469119625.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:05.883Z,1469119625.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:06.262Z,1469119626.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:06.688Z,1469119626.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:07.083Z,1469119627.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:07.450Z,1469119627.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:07.727Z,1469119627.727 [NavChartDb](INFO): # of records loaded: 20000
2016-07-21T16:47:07.859Z,1469119627.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:08.266Z,1469119628.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:08.663Z,1469119628.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:09.091Z,1469119629.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:09.486Z,1469119629.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:09.867Z,1469119629.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:10.255Z,1469119630.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:10.663Z,1469119630.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:11.067Z,1469119631.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:11.465Z,1469119631.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:11.866Z,1469119631.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:12.278Z,1469119632.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:12.679Z,1469119632.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:13.075Z,1469119633.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:13.467Z,1469119633.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:13.871Z,1469119633.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:14.271Z,1469119634.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:14.671Z,1469119634.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:15.068Z,1469119635.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:15.482Z,1469119635.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:15.879Z,1469119635.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:16.165Z,1469119636.165 [NavChartDb](INFO): # of records loaded: 25000
2016-07-21T16:47:16.271Z,1469119636.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:16.667Z,1469119636.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:17.063Z,1469119637.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:17.455Z,1469119637.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:17.863Z,1469119637.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:18.264Z,1469119638.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:18.679Z,1469119638.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:19.078Z,1469119639.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:19.471Z,1469119639.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:19.875Z,1469119639.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:20.281Z,1469119640.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:20.656Z,1469119640.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:21.086Z,1469119641.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:21.462Z,1469119641.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:21.879Z,1469119641.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:22.263Z,1469119642.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:22.667Z,1469119642.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:23.063Z,1469119643.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:23.466Z,1469119643.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:23.866Z,1469119643.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:24.271Z,1469119644.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:24.601Z,1469119644.601 [NavChartDb](INFO): # of records loaded: 30000
2016-07-21T16:47:24.683Z,1469119644.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:25.078Z,1469119645.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:25.447Z,1469119645.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:25.859Z,1469119645.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:26.290Z,1469119646.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:26.667Z,1469119646.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:27.079Z,1469119647.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:27.479Z,1469119647.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:27.894Z,1469119647.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:28.258Z,1469119648.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:28.660Z,1469119648.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:29.068Z,1469119649.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:29.460Z,1469119649.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:29.878Z,1469119649.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:30.275Z,1469119650.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:30.682Z,1469119650.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:31.079Z,1469119651.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:31.452Z,1469119651.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:31.852Z,1469119651.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:32.266Z,1469119652.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:32.659Z,1469119652.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:33.075Z,1469119653.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:33.467Z,1469119653.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:33.900Z,1469119653.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:34.267Z,1469119654.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:34.659Z,1469119654.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:35.074Z,1469119655.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:35.467Z,1469119655.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:35.569Z,1469119655.569 [NavChartDb](INFO): # of records loaded: 35000
2016-07-21T16:47:35.887Z,1469119655.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:36.295Z,1469119656.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:36.677Z,1469119656.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:37.087Z,1469119657.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:37.463Z,1469119657.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:37.863Z,1469119657.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:38.307Z,1469119658.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:38.663Z,1469119658.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:39.063Z,1469119659.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:39.466Z,1469119659.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:39.866Z,1469119659.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:40.262Z,1469119660.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:40.311Z,1469119660.311 [CBIT](INFO): Clearing failed state for component BPC1
2016-07-21T16:47:40.311Z,1469119660.311 [BPC1] No Fault, FailCount= 10
2016-07-21T16:47:40.730Z,1469119660.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:41.066Z,1469119661.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:41.474Z,1469119661.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:41.846Z,1469119661.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:42.269Z,1469119662.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:42.673Z,1469119662.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:43.076Z,1469119663.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:43.446Z,1469119663.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:43.863Z,1469119663.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:44.254Z,1469119664.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:44.654Z,1469119664.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:45.079Z,1469119665.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:45.495Z,1469119665.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:45.907Z,1469119665.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:46.266Z,1469119666.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:46.663Z,1469119666.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:46.760Z,1469119666.760 [NavChartDb](INFO): # of records loaded: 40000
2016-07-21T16:47:47.054Z,1469119667.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:47.454Z,1469119667.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:47.873Z,1469119667.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:48.281Z,1469119668.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:48.691Z,1469119668.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:49.058Z,1469119669.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:49.482Z,1469119669.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:49.856Z,1469119669.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:50.266Z,1469119670.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:50.667Z,1469119670.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:51.067Z,1469119671.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:57.282Z,1469119677.282 [BPC1](FAULT): Failed to initialize
2016-07-21T16:47:57.282Z,1469119677.282 [BPC1] Communications Fault, FailCount= 1
2016-07-21T16:47:57.282Z,1469119677.282 [BPC1](ERROR): Communications Fault
2016-07-21T16:47:57.307Z,1469119677.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:57.363Z,1469119677.363 [CBIT](ERROR): Communications Fault in component: BPC1
2016-07-21T16:47:57.453Z,1469119677.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:57.628Z,1469119677.628 [NavChartDb](INFO): # of records loaded: 45000
2016-07-21T16:47:57.830Z,1469119677.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:58.228Z,1469119678.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:58.272Z,1469119678.272 [CBIT](INFO): Clearing failed state for component BPC1
2016-07-21T16:47:58.272Z,1469119678.272 [BPC1] No Fault, FailCount= 1
2016-07-21T16:47:58.703Z,1469119678.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:59.042Z,1469119679.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:59.447Z,1469119679.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:47:59.839Z,1469119679.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:00.251Z,1469119680.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:00.619Z,1469119680.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:01.023Z,1469119681.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:01.458Z,1469119681.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:01.831Z,1469119681.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:02.227Z,1469119682.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:02.648Z,1469119682.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:03.032Z,1469119683.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:03.419Z,1469119683.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:03.428Z,1469119683.428 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-07-21T16:43:03.2Z
2016-07-21T16:48:03.428Z,1469119683.428 [Default:CheckIn:Read_GPS] Stopped
2016-07-21T16:48:03.428Z,1469119683.428 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-07-21T16:48:03.842Z,1469119683.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:03.848Z,1469119683.848 [Default:CheckIn:Read_Iridium](DEBUG): Initialize ReadDataComponent to sense platform_communications
2016-07-21T16:48:04.698Z,1469119684.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:04.835Z,1469119684.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:07.674Z,1469119687.674 [NavChartDb](INFO): # of records loaded: 50000
2016-07-21T16:48:10.959Z,1469119690.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:11.044Z,1469119691.044 [DataOverHttps](INFO): Sending 75 bytes from file Logs/20160721T163925/Courier0004.lzma
2016-07-21T16:48:11.120Z,1469119691.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:11.509Z,1469119691.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:11.834Z,1469119691.834 [DataOverHttps](INFO): Moved sent file to Logs/20160721T163925/Courier0004.lzma.bak
2016-07-21T16:48:11.834Z,1469119691.834 [DataOverHttps](INFO): SBD MOMSN=4352270
2016-07-21T16:48:11.902Z,1469119691.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:12.854Z,1469119692.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:12.984Z,1469119692.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:18.979Z,1469119698.979 [BPC1](FAULT): Failed to initialize
2016-07-21T16:48:18.979Z,1469119698.979 [BPC1] Communications Fault, FailCount= 2
2016-07-21T16:48:18.979Z,1469119698.979 [BPC1](ERROR): Communications Fault
2016-07-21T16:48:18.987Z,1469119698.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:19.051Z,1469119699.051 [CBIT](ERROR): Communications Fault in component: BPC1
2016-07-21T16:48:19.152Z,1469119699.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:19.535Z,1469119699.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:19.932Z,1469119699.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:19.985Z,1469119699.985 [CBIT](INFO): Clearing failed state for component BPC1
2016-07-21T16:48:19.985Z,1469119699.985 [BPC1] No Fault, FailCount= 2
2016-07-21T16:48:20.391Z,1469119700.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:20.730Z,1469119700.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:23.000Z,1469119703.000 [NavChartDb](INFO): # of records loaded: 55000
2016-07-21T16:48:25.528Z,1469119705.528 [NavChartDb](INFO): Calculating coverage of Resources/ElectronicNavigationCharts/US5CA50M.000
2016-07-21T16:48:26.299Z,1469119706.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:26.394Z,1469119706.394 [DataOverHttps](INFO): Sending 575 bytes from file Logs/20160721T163925/Express0005.lzma
2016-07-21T16:48:26.471Z,1469119706.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:26.876Z,1469119706.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:27.182Z,1469119707.182 [DataOverHttps](INFO): Moved sent file to Logs/20160721T163925/Express0005.lzma.bak
2016-07-21T16:48:27.182Z,1469119707.182 [DataOverHttps](INFO): SBD MOMSN=4352273
2016-07-21T16:48:27.248Z,1469119707.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:28.145Z,1469119708.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:28.155Z,1469119708.155 [Default:CheckIn:Read_Iridium] Stopped
2016-07-21T16:48:28.155Z,1469119708.155 [Default:CheckIn:C.Wait] Running Loop=1
2016-07-21T16:48:28.155Z,1469119708.155 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-07-21T16:48:28.290Z,1469119708.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:32.543Z,1469119712.543 [NavChartDb](INFO): Done scanning edges of Resources/ElectronicNavigationCharts/US5CA50M.000
2016-07-21T16:48:34.994Z,1469119714.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:35.126Z,1469119715.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:35.507Z,1469119715.507 [BPC1](FAULT): Failed to initialize
2016-07-21T16:48:35.507Z,1469119715.507 [BPC1] Communications Fault, FailCount= 3
2016-07-21T16:48:35.507Z,1469119715.507 [BPC1](ERROR): Communications Fault
2016-07-21T16:48:35.526Z,1469119715.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:35.566Z,1469119715.566 [CBIT](ERROR): Communications Fault in component: BPC1
2016-07-21T16:48:35.934Z,1469119715.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:36.315Z,1469119716.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:36.723Z,1469119716.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:36.738Z,1469119716.738 [CBIT](INFO): Clearing failed state for component BPC1
2016-07-21T16:48:36.738Z,1469119716.738 [BPC1] No Fault, FailCount= 3
2016-07-21T16:48:37.210Z,1469119717.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:37.529Z,1469119717.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:37.935Z,1469119717.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:38.299Z,1469119718.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:38.706Z,1469119718.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:38.802Z,1469119718.802 [NavChartDb](INFO): # of records loaded: 60000
2016-07-21T16:48:39.106Z,1469119719.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:39.506Z,1469119719.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:39.904Z,1469119719.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:40.362Z,1469119720.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:40.719Z,1469119720.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:41.112Z,1469119721.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:41.507Z,1469119721.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:41.907Z,1469119721.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:42.307Z,1469119722.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:42.718Z,1469119722.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:43.119Z,1469119723.119 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:43.119Z,1469119723.119 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2016-07-21T16:48:43.119Z,1469119723.119 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-07-21T16:48:43.122Z,1469119723.122 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:43.122Z,1469119723.122 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2016-07-21T16:48:43.122Z,1469119723.122 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2016-07-21T16:48:43.124Z,1469119723.124 [DeadReckonWithRespectToWater](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:43.124Z,1469119723.124 [DeadReckonWithRespectToWater] Software Fault, FailCount= 3
2016-07-21T16:48:43.124Z,1469119723.124 [DeadReckonWithRespectToWater](ERROR): Software Fault
2016-07-21T16:48:43.126Z,1469119723.126 [DeadReckonWithRespectToSeafloor](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:43.127Z,1469119723.127 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2016-07-21T16:48:43.127Z,1469119723.127 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-07-21T16:48:43.137Z,1469119723.137 [DeadReckonUsingDVLWaterTrack](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:43.137Z,1469119723.137 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 3
2016-07-21T16:48:43.137Z,1469119723.137 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-07-21T16:48:43.186Z,1469119723.186 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-07-21T16:48:43.186Z,1469119723.186 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2016-07-21T16:48:43.186Z,1469119723.187 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToWater
2016-07-21T16:48:43.187Z,1469119723.187 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-07-21T16:48:43.187Z,1469119723.187 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-07-21T16:48:43.554Z,1469119723.554 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-07-21T16:48:43.554Z,1469119723.554 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2016-07-21T16:48:43.554Z,1469119723.554 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2016-07-21T16:48:43.554Z,1469119723.554 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2016-07-21T16:48:43.555Z,1469119723.555 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToWater
2016-07-21T16:48:43.555Z,1469119723.555 [DeadReckonWithRespectToWater] No Fault, FailCount= 3
2016-07-21T16:48:43.556Z,1469119723.556 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-07-21T16:48:43.556Z,1469119723.556 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2016-07-21T16:48:43.556Z,1469119723.556 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-07-21T16:48:43.556Z,1469119723.556 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 3
2016-07-21T16:48:43.938Z,1469119723.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-07-21T16:48:43.938Z,1469119723.938 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-07-21T16:48:43.938Z,1469119723.938 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-07-21T16:48:43.939Z,1469119723.939 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2016-07-21T16:48:43.939Z,1469119723.939 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2016-07-21T16:48:43.939Z,1469119723.940 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2016-07-21T16:48:43.940Z,1469119723.940 [DeadReckonWithRespectToWater](DEBUG): Initializing DeadReckonWithRespectToWater component.
2016-07-21T16:48:43.940Z,1469119723.940 [DeadReckonWithRespectToWater](INFO): Will consider orientation measurement stale after 120s.
2016-07-21T16:48:43.941Z,1469119723.941 [DeadReckonWithRespectToWater](INFO): Will consider velocity measurement stale after 20s.
2016-07-21T16:48:43.941Z,1469119723.941 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-07-21T16:48:43.942Z,1469119723.941 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-07-21T16:48:43.942Z,1469119723.942 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-07-21T16:48:43.942Z,1469119723.942 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-07-21T16:48:43.943Z,1469119723.943 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-07-21T16:48:43.943Z,1469119723.943 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-07-21T16:48:44.338Z,1469119724.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-07-21T16:48:44.339Z,1469119724.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:44.712Z,1469119724.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-07-21T16:48:44.713Z,1469119724.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:45.140Z,1469119725.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-07-21T16:48:45.141Z,1469119725.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:45.545Z,1469119725.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-07-21T16:48:45.546Z,1469119725.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:45.942Z,1469119725.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-07-21T16:48:45.943Z,1469119725.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:46.353Z,1469119726.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-07-21T16:48:46.354Z,1469119726.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:46.740Z,1469119726.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-07-21T16:48:46.746Z,1469119726.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:47.123Z,1469119727.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-07-21T16:48:47.124Z,1469119727.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:47.510Z,1469119727.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-07-21T16:48:47.511Z,1469119727.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:47.907Z,1469119727.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-07-21T16:48:47.908Z,1469119727.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:48.316Z,1469119728.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-07-21T16:48:48.321Z,1469119728.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:48.717Z,1469119728.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-07-21T16:48:48.718Z,1469119728.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:49.145Z,1469119729.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-07-21T16:48:49.146Z,1469119729.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:49.523Z,1469119729.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-07-21T16:48:49.524Z,1469119729.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:49.938Z,1469119729.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-07-21T16:48:49.938Z,1469119729.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:50.331Z,1469119730.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2016-07-21T16:48:50.332Z,1469119730.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:50.707Z,1469119730.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2016-07-21T16:48:50.708Z,1469119730.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:51.107Z,1469119731.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2016-07-21T16:48:51.108Z,1469119731.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:51.517Z,1469119731.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2016-07-21T16:48:51.518Z,1469119731.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:51.935Z,1469119731.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2016-07-21T16:48:51.936Z,1469119731.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:52.315Z,1469119732.315 [BPC1](FAULT): Failed to initialize
2016-07-21T16:48:52.315Z,1469119732.315 [BPC1] Communications Fault, FailCount= 4
2016-07-21T16:48:52.315Z,1469119732.315 [BPC1](ERROR): Communications Fault
2016-07-21T16:48:52.322Z,1469119732.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2016-07-21T16:48:52.323Z,1469119732.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:52.382Z,1469119732.382 [CBIT](ERROR): Communications Fault in component: BPC1
2016-07-21T16:48:52.718Z,1469119732.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2016-07-21T16:48:52.719Z,1469119732.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:53.114Z,1469119733.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2016-07-21T16:48:53.115Z,1469119733.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:53.516Z,1469119733.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2016-07-21T16:48:53.517Z,1469119733.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:53.534Z,1469119733.534 [CBIT](INFO): Clearing failed state for component BPC1
2016-07-21T16:48:53.534Z,1469119733.534 [BPC1] No Fault, FailCount= 4
2016-07-21T16:48:53.986Z,1469119733.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2016-07-21T16:48:53.987Z,1469119733.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:54.306Z,1469119734.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2016-07-21T16:48:54.308Z,1469119734.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:54.741Z,1469119734.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2016-07-21T16:48:54.742Z,1469119734.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:54.753Z,1469119734.753 [NavChartDb](INFO): Done scanning nodes of Resources/ElectronicNavigationCharts/US5CA50M.000
2016-07-21T16:48:54.903Z,1469119734.903 [NavChartDb](INFO): # of records loaded: 62026
2016-07-21T16:48:54.910Z,1469119734.910 [NavChartDb](IMPORTANT): Loaded Electronic Nav Chart data from US5CA50M.000
2016-07-21T16:48:54.911Z,1469119734.911 [NavChartDb](INFO): Setup scan of Resources/ElectronicNavigationCharts/US4AK5VM.000
2016-07-21T16:48:55.111Z,1469119735.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2016-07-21T16:48:55.112Z,1469119735.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:55.512Z,1469119735.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2016-07-21T16:48:55.514Z,1469119735.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:55.914Z,1469119735.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2016-07-21T16:48:55.915Z,1469119735.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:56.304Z,1469119736.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2016-07-21T16:48:56.305Z,1469119736.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:56.704Z,1469119736.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2016-07-21T16:48:56.706Z,1469119736.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:57.110Z,1469119737.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2016-07-21T16:48:57.111Z,1469119737.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:57.505Z,1469119737.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2016-07-21T16:48:57.506Z,1469119737.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:57.911Z,1469119737.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2016-07-21T16:48:57.912Z,1469119737.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:58.366Z,1469119738.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2016-07-21T16:48:58.367Z,1469119738.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:58.715Z,1469119738.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2016-07-21T16:48:58.716Z,1469119738.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:59.109Z,1469119739.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2016-07-21T16:48:59.111Z,1469119739.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:59.505Z,1469119739.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2016-07-21T16:48:59.506Z,1469119739.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:48:59.916Z,1469119739.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2016-07-21T16:48:59.917Z,1469119739.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:00.315Z,1469119740.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2016-07-21T16:49:00.316Z,1469119740.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:00.368Z,1469119740.368 [NavChartDb](INFO): Done scanning features of Resources/ElectronicNavigationCharts/US4AK5VM.000
2016-07-21T16:49:00.715Z,1469119740.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2016-07-21T16:49:00.716Z,1469119740.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:01.119Z,1469119741.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2016-07-21T16:49:01.120Z,1469119741.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:01.523Z,1469119741.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2016-07-21T16:49:01.524Z,1469119741.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:01.898Z,1469119741.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2016-07-21T16:49:01.899Z,1469119741.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:02.331Z,1469119742.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2016-07-21T16:49:02.333Z,1469119742.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:02.723Z,1469119742.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2016-07-21T16:49:02.724Z,1469119742.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:03.138Z,1469119743.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:03.540Z,1469119743.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:03.932Z,1469119743.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:04.298Z,1469119744.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:04.698Z,1469119744.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:05.115Z,1469119745.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:05.519Z,1469119745.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:05.910Z,1469119745.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:06.323Z,1469119746.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:06.715Z,1469119746.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:07.106Z,1469119747.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:07.510Z,1469119747.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:07.919Z,1469119747.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:08.331Z,1469119748.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:08.714Z,1469119748.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:09.109Z,1469119749.109 [BPC1](FAULT): Failed to initialize
2016-07-21T16:49:09.109Z,1469119749.109 [BPC1] Communications Fault, FailCount= 5
2016-07-21T16:49:09.109Z,1469119749.109 [BPC1](ERROR): Communications Fault
2016-07-21T16:49:09.129Z,1469119749.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:09.180Z,1469119749.180 [CBIT](ERROR): Communications Fault in component: BPC1
2016-07-21T16:49:09.531Z,1469119749.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:09.813Z,1469119749.813 [NavChartDb](INFO): # of records loaded: 5000
2016-07-21T16:49:09.921Z,1469119749.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:10.321Z,1469119750.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:10.352Z,1469119750.352 [CBIT](INFO): Clearing failed state for component BPC1
2016-07-21T16:49:10.352Z,1469119750.352 [BPC1] No Fault, FailCount= 5
2016-07-21T16:49:10.780Z,1469119750.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:11.103Z,1469119751.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:11.519Z,1469119751.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:11.935Z,1469119751.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:12.339Z,1469119752.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:12.741Z,1469119752.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:13.106Z,1469119753.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:13.513Z,1469119753.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:13.918Z,1469119753.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:14.318Z,1469119754.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:14.712Z,1469119754.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:15.131Z,1469119755.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:15.549Z,1469119755.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:15.924Z,1469119755.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:16.311Z,1469119756.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:16.731Z,1469119756.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:17.116Z,1469119757.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:17.526Z,1469119757.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:17.923Z,1469119757.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:18.340Z,1469119758.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:18.735Z,1469119758.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:19.131Z,1469119759.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:19.527Z,1469119759.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:19.659Z,1469119759.659 [NavChartDb](INFO): # of records loaded: 10000
2016-07-21T16:49:19.915Z,1469119759.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:20.308Z,1469119760.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:20.714Z,1469119760.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:21.120Z,1469119761.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:21.535Z,1469119761.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:21.931Z,1469119761.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:22.323Z,1469119762.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:22.755Z,1469119762.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:23.116Z,1469119763.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:23.527Z,1469119763.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:23.918Z,1469119763.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:24.320Z,1469119764.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:24.722Z,1469119764.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:25.123Z,1469119765.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:25.524Z,1469119765.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:25.924Z,1469119765.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:26.326Z,1469119766.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:26.727Z,1469119766.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:27.127Z,1469119767.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:27.554Z,1469119767.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:27.936Z,1469119767.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:28.305Z,1469119768.305 [BPC1](ERROR): Failed to parse bank A battery data
2016-07-21T16:49:28.305Z,1469119768.305 [BPC1] Data Fault, FailCount= 6
2016-07-21T16:49:28.305Z,1469119768.305 [BPC1](ERROR): Data Fault
2016-07-21T16:49:28.329Z,1469119768.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:28.378Z,1469119768.378 [CBIT](ERROR): Data Fault in component: BPC1
2016-07-21T16:49:28.710Z,1469119768.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:30.908Z,1469119770.908 [NavChartDb](INFO): # of records loaded: 15000
2016-07-21T16:49:34.679Z,1469119774.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:34.826Z,1469119774.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:34.874Z,1469119774.875 [CBIT](INFO): Clearing failed state for component BPC1
2016-07-21T16:49:34.875Z,1469119774.875 [BPC1] No Fault, FailCount= 6
2016-07-21T16:49:35.283Z,1469119775.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:35.640Z,1469119775.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:36.018Z,1469119776.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:36.412Z,1469119776.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:36.831Z,1469119776.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:37.212Z,1469119777.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:37.619Z,1469119777.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:38.031Z,1469119778.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:38.414Z,1469119778.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:38.824Z,1469119778.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:39.199Z,1469119779.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:39.620Z,1469119779.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:40.026Z,1469119780.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:40.430Z,1469119780.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:40.830Z,1469119780.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:41.206Z,1469119781.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:41.252Z,1469119781.252 [CBIT](DEBUG): EFC running - data check-sum false
2016-07-21T16:49:41.631Z,1469119781.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:42.026Z,1469119782.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:42.426Z,1469119782.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:42.800Z,1469119782.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:43.203Z,1469119783.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:43.602Z,1469119783.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:43.740Z,1469119783.740 [NavChartDb](INFO): # of records loaded: 20000
2016-07-21T16:49:44.035Z,1469119784.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:44.431Z,1469119784.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:44.807Z,1469119784.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:45.205Z,1469119785.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:45.610Z,1469119785.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:45.998Z,1469119785.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:46.407Z,1469119786.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:46.818Z,1469119786.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:47.054Z,1469119787.054 [NavChartDb](INFO): Calculating coverage of Resources/ElectronicNavigationCharts/US4AK5VM.000
2016-07-21T16:49:47.219Z,1469119787.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:47.606Z,1469119787.606 [BPC1](ERROR): Failed to parse bank A battery data
2016-07-21T16:49:47.607Z,1469119787.606 [BPC1] Data Fault, FailCount= 7
2016-07-21T16:49:47.607Z,1469119787.606 [BPC1](ERROR): Data Fault
2016-07-21T16:49:47.623Z,1469119787.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:47.695Z,1469119787.695 [CBIT](ERROR): Data Fault in component: BPC1
2016-07-21T16:49:48.026Z,1469119788.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:48.419Z,1469119788.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:48.819Z,1469119788.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:48.876Z,1469119788.876 [CBIT](INFO): Clearing failed state for component BPC1
2016-07-21T16:49:48.876Z,1469119788.876 [BPC1] No Fault, FailCount= 7
2016-07-21T16:49:49.267Z,1469119789.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:49.643Z,1469119789.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:49.681Z,1469119789.681 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-07-21T16:49:49.681Z,1469119789.681 [Rowe_600LCM] No Fault, FailCount= 5
2016-07-21T16:49:49.721Z,1469119789.721 [Rowe_600LCM](INFO): Initializing
2016-07-21T16:49:49.721Z,1469119789.721 [Rowe_600LCM](INFO): Checking LCM
2016-07-21T16:49:49.722Z,1469119789.722 [Rowe_600LCM](FAULT): LCM not connected
2016-07-21T16:49:49.722Z,1469119789.722 [Rowe_600LCM] Hardware Fault, FailCount= 1
2016-07-21T16:49:49.722Z,1469119789.722 [Rowe_600LCM](ERROR): Hardware Fault
2016-07-21T16:49:50.026Z,1469119790.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:50.048Z,1469119790.048 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2016-07-21T16:49:50.125Z,1469119790.125 [Rowe_600LCM](INFO): Powering down
2016-07-21T16:49:50.406Z,1469119790.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:50.830Z,1469119790.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:51.210Z,1469119791.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:51.610Z,1469119791.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:51.664Z,1469119791.664 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-07-21T16:49:51.664Z,1469119791.664 [Rowe_600LCM] No Fault, FailCount= 1
2016-07-21T16:49:51.741Z,1469119791.741 [Rowe_600LCM](INFO): Initializing
2016-07-21T16:49:51.742Z,1469119791.741 [Rowe_600LCM](INFO): Checking LCM
2016-07-21T16:49:51.742Z,1469119791.742 [Rowe_600LCM](FAULT): LCM not connected
2016-07-21T16:49:51.742Z,1469119791.742 [Rowe_600LCM] Hardware Fault, FailCount= 2
2016-07-21T16:49:51.742Z,1469119791.742 [Rowe_600LCM](ERROR): Hardware Fault
2016-07-21T16:49:52.014Z,1469119792.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:52.046Z,1469119792.046 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2016-07-21T16:49:52.145Z,1469119792.145 [Rowe_600LCM](INFO): Powering down
2016-07-21T16:49:52.402Z,1469119792.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:52.867Z,1469119792.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:53.234Z,1469119793.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:53.621Z,1469119793.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:53.678Z,1469119793.678 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-07-21T16:49:53.678Z,1469119793.678 [Rowe_600LCM] No Fault, FailCount= 2
2016-07-21T16:49:53.766Z,1469119793.766 [Rowe_600LCM](INFO): Initializing
2016-07-21T16:49:53.766Z,1469119793.766 [Rowe_600LCM](INFO): Checking LCM
2016-07-21T16:49:53.766Z,1469119793.766 [Rowe_600LCM](FAULT): LCM not connected
2016-07-21T16:49:53.766Z,1469119793.766 [Rowe_600LCM] Hardware Fault, FailCount= 3
2016-07-21T16:49:53.766Z,1469119793.766 [Rowe_600LCM](ERROR): Hardware Fault
2016-07-21T16:49:54.022Z,1469119794.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:54.074Z,1469119794.074 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2016-07-21T16:49:54.169Z,1469119794.169 [Rowe_600LCM](INFO): Powering down
2016-07-21T16:49:54.439Z,1469119794.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:54.831Z,1469119794.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:55.016Z,1469119795.016 [NavChartDb](INFO): # of records loaded: 25000
2016-07-21T16:49:55.234Z,1469119795.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:55.606Z,1469119795.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:55.656Z,1469119795.656 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-07-21T16:49:55.656Z,1469119795.656 [Rowe_600LCM] No Fault, FailCount= 3
2016-07-21T16:49:55.785Z,1469119795.785 [Rowe_600LCM](INFO): Initializing
2016-07-21T16:49:55.785Z,1469119795.785 [Rowe_600LCM](INFO): Checking LCM
2016-07-21T16:49:55.785Z,1469119795.786 [Rowe_600LCM](FAULT): LCM not connected
2016-07-21T16:49:55.785Z,1469119795.786 [Rowe_600LCM] Hardware Fault, FailCount= 4
2016-07-21T16:49:55.786Z,1469119795.786 [Rowe_600LCM](ERROR): Hardware Fault
2016-07-21T16:49:55.966Z,1469119795.966 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-21T16:49:55.966Z,1469119795.966 [NAL9602] Data Fault, FailCount= 1
2016-07-21T16:49:55.966Z,1469119795.967 [NAL9602](ERROR): Data Fault
2016-07-21T16:49:56.035Z,1469119796.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:56.079Z,1469119796.079 [CBIT](ERROR): Data Fault in component: NAL9602
2016-07-21T16:49:56.080Z,1469119796.080 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2016-07-21T16:49:56.190Z,1469119796.190 [Rowe_600LCM](INFO): Powering down
2016-07-21T16:49:56.370Z,1469119796.370 [NAL9602](INFO): Powering down
2016-07-21T16:49:56.438Z,1469119796.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:56.831Z,1469119796.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:57.209Z,1469119797.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:57.261Z,1469119797.261 [CBIT](INFO): Clearing failed state for component NAL9602
2016-07-21T16:49:57.262Z,1469119797.261 [NAL9602] No Fault, FailCount= 1
2016-07-21T16:49:57.611Z,1469119797.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:57.660Z,1469119797.660 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-07-21T16:49:57.660Z,1469119797.660 [Rowe_600LCM] No Fault, FailCount= 4
2016-07-21T16:49:57.814Z,1469119797.814 [Rowe_600LCM](INFO): Initializing
2016-07-21T16:49:57.814Z,1469119797.814 [Rowe_600LCM](INFO): Checking LCM
2016-07-21T16:49:57.814Z,1469119797.814 [Rowe_600LCM](FAULT): LCM not connected
2016-07-21T16:49:57.814Z,1469119797.815 [Rowe_600LCM] Hardware Fault, FailCount= 5
2016-07-21T16:49:57.814Z,1469119797.815 [Rowe_600LCM](ERROR): Hardware Fault
2016-07-21T16:49:58.041Z,1469119798.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:58.088Z,1469119798.088 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2016-07-21T16:49:58.089Z,1469119798.089 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2016-07-21T16:49:58.217Z,1469119798.217 [Rowe_600LCM](INFO): Powering down
2016-07-21T16:49:58.408Z,1469119798.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:58.825Z,1469119798.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:59.219Z,1469119799.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:49:59.623Z,1469119799.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:00.026Z,1469119800.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:00.427Z,1469119800.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:00.816Z,1469119800.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:01.183Z,1469119801.183 [NavChartDb](INFO): Done scanning edges of Resources/ElectronicNavigationCharts/US4AK5VM.000
2016-07-21T16:50:01.222Z,1469119801.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:01.558Z,1469119801.558 [NAL9602](INFO): Powering up NAL9602
2016-07-21T16:50:01.585Z,1469119801.585 [BPC1](ERROR): Failed to parse bank B battery data
2016-07-21T16:50:01.585Z,1469119801.585 [BPC1] Data Fault, FailCount= 8
2016-07-21T16:50:01.585Z,1469119801.585 [BPC1](ERROR): Data Fault
2016-07-21T16:50:01.631Z,1469119801.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:01.668Z,1469119801.668 [CBIT](ERROR): Data Fault in component: BPC1
2016-07-21T16:50:02.016Z,1469119802.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:02.427Z,1469119802.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:02.827Z,1469119802.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:02.842Z,1469119802.842 [CBIT](INFO): Clearing failed state for component BPC1
2016-07-21T16:50:02.842Z,1469119802.842 [BPC1] No Fault, FailCount= 8
2016-07-21T16:50:03.276Z,1469119803.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:03.618Z,1469119803.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:04.030Z,1469119804.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:04.427Z,1469119804.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:04.788Z,1469119804.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:05.188Z,1469119805.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:05.600Z,1469119805.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:06.025Z,1469119806.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:06.388Z,1469119806.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:06.799Z,1469119806.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:07.195Z,1469119807.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:07.603Z,1469119807.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:07.996Z,1469119807.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:08.401Z,1469119808.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:08.816Z,1469119808.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:09.218Z,1469119809.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:09.618Z,1469119809.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:10.015Z,1469119810.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:10.423Z,1469119810.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:10.814Z,1469119810.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:11.218Z,1469119811.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:11.512Z,1469119811.512 [NavChartDb](INFO): Done scanning nodes of Resources/ElectronicNavigationCharts/US4AK5VM.000
2016-07-21T16:50:11.614Z,1469119811.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:11.703Z,1469119811.704 [NavChartDb](INFO): # of records loaded: 29788
2016-07-21T16:50:11.710Z,1469119811.710 [NavChartDb](IMPORTANT): Loaded Electronic Nav Chart data from US4AK5VM.000
2016-07-21T16:50:11.711Z,1469119811.711 [NavChartDb](INFO): Setup scan of Resources/ElectronicNavigationCharts/US4AK5QM.000
2016-07-21T16:50:11.999Z,1469119811.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:12.409Z,1469119812.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:12.758Z,1469119812.758 [NAL9602](INFO): NAL9602 initialized
2016-07-21T16:50:12.803Z,1469119812.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:13.202Z,1469119813.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:13.606Z,1469119813.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:14.048Z,1469119814.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:14.411Z,1469119814.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:14.806Z,1469119814.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:15.204Z,1469119815.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:15.604Z,1469119815.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:16.009Z,1469119816.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:16.412Z,1469119816.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:16.812Z,1469119816.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:17.186Z,1469119817.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:17.587Z,1469119817.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:17.990Z,1469119817.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:18.390Z,1469119818.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:18.787Z,1469119818.787 [BPC1](ERROR): Failed to receive battery data
2016-07-21T16:50:18.787Z,1469119818.787 [BPC1] Communications Fault, FailCount= 9
2016-07-21T16:50:18.787Z,1469119818.787 [BPC1](ERROR): Communications Fault
2016-07-21T16:50:18.795Z,1469119818.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:18.811Z,1469119818.811 [CBIT](ERROR): Communications Fault in component: BPC1
2016-07-21T16:50:18.935Z,1469119818.935 [NavChartDb](INFO): Done scanning features of Resources/ElectronicNavigationCharts/US4AK5QM.000
2016-07-21T16:50:19.243Z,1469119819.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:19.606Z,1469119819.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:20.010Z,1469119820.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:20.077Z,1469119820.077 [CBIT](INFO): Clearing failed state for component BPC1
2016-07-21T16:50:20.078Z,1469119820.078 [BPC1] No Fault, FailCount= 9
2016-07-21T16:50:20.455Z,1469119820.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:20.797Z,1469119820.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:21.207Z,1469119821.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:21.639Z,1469119821.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:22.002Z,1469119822.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:22.474Z,1469119822.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:22.831Z,1469119822.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:23.235Z,1469119823.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:23.591Z,1469119823.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:24.030Z,1469119824.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:24.394Z,1469119824.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:24.805Z,1469119824.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:25.219Z,1469119825.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:25.651Z,1469119825.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:26.012Z,1469119826.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:26.406Z,1469119826.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:26.808Z,1469119826.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:27.215Z,1469119827.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:27.615Z,1469119827.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:28.030Z,1469119828.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:28.416Z,1469119828.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:28.835Z,1469119828.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:33.392Z,1469119833.392 [NavChartDb](INFO): # of records loaded: 5000
2016-07-21T16:50:34.974Z,1469119834.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:35.129Z,1469119835.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:35.486Z,1469119835.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:35.903Z,1469119835.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:36.298Z,1469119836.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:36.701Z,1469119836.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:37.104Z,1469119837.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:37.499Z,1469119837.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:37.931Z,1469119837.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:38.303Z,1469119838.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:38.706Z,1469119838.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:39.067Z,1469119839.067 [BPC1](ERROR): Failed to receive battery data
2016-07-21T16:50:39.068Z,1469119839.068 [BPC1] Communications Fault, FailCount= 10
2016-07-21T16:50:39.068Z,1469119839.068 [BPC1](ERROR): Communications Fault
2016-07-21T16:50:39.114Z,1469119839.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:39.165Z,1469119839.165 [CBIT](ERROR): Communications Fault in component: BPC1
2016-07-21T16:50:39.166Z,1469119839.166 [CBIT](CRITICAL): Communications Fault in component: BPC1
2016-07-21T16:50:39.471Z,1469119839.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:39.875Z,1469119839.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:40.315Z,1469119840.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:40.683Z,1469119840.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:41.115Z,1469119841.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:41.519Z,1469119841.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:41.886Z,1469119841.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:42.282Z,1469119842.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:42.691Z,1469119842.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:43.090Z,1469119843.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:43.515Z,1469119843.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:43.886Z,1469119843.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:44.303Z,1469119844.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:44.711Z,1469119844.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:44.975Z,1469119844.975 [NavChartDb](INFO): # of records loaded: 10000
2016-07-21T16:50:45.089Z,1469119845.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:45.490Z,1469119845.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:45.895Z,1469119845.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:46.298Z,1469119846.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:46.670Z,1469119846.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:47.094Z,1469119847.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:47.503Z,1469119847.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:47.895Z,1469119847.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:48.276Z,1469119848.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:48.674Z,1469119848.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:49.109Z,1469119849.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:49.479Z,1469119849.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:49.893Z,1469119849.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:50.314Z,1469119850.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:50.731Z,1469119850.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:51.090Z,1469119851.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:51.487Z,1469119851.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:51.887Z,1469119851.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:52.290Z,1469119852.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:52.690Z,1469119852.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:53.091Z,1469119853.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:53.490Z,1469119853.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:53.903Z,1469119853.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:54.286Z,1469119854.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:54.699Z,1469119854.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:55.094Z,1469119855.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:55.280Z,1469119855.280 [NavChartDb](INFO): # of records loaded: 15000
2016-07-21T16:50:55.495Z,1469119855.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:55.900Z,1469119855.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:56.292Z,1469119856.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:56.716Z,1469119856.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:57.087Z,1469119857.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:57.494Z,1469119857.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:57.895Z,1469119857.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:58.270Z,1469119858.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:58.699Z,1469119858.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:59.092Z,1469119859.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:59.503Z,1469119859.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:50:59.880Z,1469119859.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:00.287Z,1469119860.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:00.688Z,1469119860.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:01.082Z,1469119861.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:01.480Z,1469119861.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:01.906Z,1469119861.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:02.299Z,1469119862.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:02.725Z,1469119862.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:03.084Z,1469119863.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:03.498Z,1469119863.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:03.892Z,1469119863.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:04.283Z,1469119864.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:04.693Z,1469119864.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:05.092Z,1469119865.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:05.512Z,1469119865.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:05.901Z,1469119865.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:06.283Z,1469119866.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:06.678Z,1469119866.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:06.783Z,1469119866.783 [NavChartDb](INFO): # of records loaded: 20000
2016-07-21T16:51:07.103Z,1469119867.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:07.499Z,1469119867.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:07.901Z,1469119867.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:08.299Z,1469119868.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:08.707Z,1469119868.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:09.099Z,1469119869.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:09.470Z,1469119869.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:09.880Z,1469119869.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:10.287Z,1469119870.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:10.691Z,1469119870.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:11.091Z,1469119871.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:11.492Z,1469119871.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:11.910Z,1469119871.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:12.283Z,1469119872.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:12.687Z,1469119872.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:13.094Z,1469119873.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:13.488Z,1469119873.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:13.895Z,1469119873.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:14.307Z,1469119874.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:14.692Z,1469119874.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:15.086Z,1469119875.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:15.507Z,1469119875.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:15.895Z,1469119875.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:16.307Z,1469119876.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:16.706Z,1469119876.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:17.107Z,1469119877.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:17.523Z,1469119877.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:17.911Z,1469119877.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:18.290Z,1469119878.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:18.676Z,1469119878.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:19.103Z,1469119879.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:19.500Z,1469119879.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:19.907Z,1469119879.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:20.098Z,1469119880.098 [NavChartDb](INFO): # of records loaded: 25000
2016-07-21T16:51:20.313Z,1469119880.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:20.700Z,1469119880.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:21.093Z,1469119881.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:21.480Z,1469119881.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:21.887Z,1469119881.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:22.286Z,1469119882.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:22.698Z,1469119882.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:23.091Z,1469119883.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:23.495Z,1469119883.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:23.899Z,1469119883.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:24.268Z,1469119884.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:24.691Z,1469119884.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:25.102Z,1469119885.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:25.487Z,1469119885.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:25.891Z,1469119885.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:26.313Z,1469119886.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:26.691Z,1469119886.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:27.091Z,1469119887.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:27.478Z,1469119887.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:27.895Z,1469119887.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:28.284Z,1469119888.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:28.684Z,1469119888.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:29.091Z,1469119889.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:34.609Z,1469119894.609 [NavChartDb](INFO): # of records loaded: 30000
2016-07-21T16:51:35.300Z,1469119895.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:35.433Z,1469119895.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:35.818Z,1469119895.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:36.238Z,1469119896.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:36.614Z,1469119896.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:37.047Z,1469119897.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:37.435Z,1469119897.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:37.822Z,1469119897.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:38.207Z,1469119898.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:38.610Z,1469119898.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:39.019Z,1469119899.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:39.407Z,1469119899.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:39.840Z,1469119899.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:40.223Z,1469119900.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:40.612Z,1469119900.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:41.010Z,1469119901.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:41.412Z,1469119901.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:41.823Z,1469119901.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:42.196Z,1469119902.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:42.623Z,1469119902.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:43.026Z,1469119903.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:43.431Z,1469119903.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:43.831Z,1469119903.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:44.211Z,1469119904.211 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:44.211Z,1469119904.211 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 4
2016-07-21T16:51:44.212Z,1469119904.211 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-07-21T16:51:44.238Z,1469119904.238 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:44.238Z,1469119904.238 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2016-07-21T16:51:44.238Z,1469119904.238 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2016-07-21T16:51:44.240Z,1469119904.240 [DeadReckonWithRespectToWater](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:44.240Z,1469119904.240 [DeadReckonWithRespectToWater] Software Fault, FailCount= 4
2016-07-21T16:51:44.240Z,1469119904.240 [DeadReckonWithRespectToWater](ERROR): Software Fault
2016-07-21T16:51:44.250Z,1469119904.250 [DeadReckonWithRespectToSeafloor](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:44.251Z,1469119904.251 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2016-07-21T16:51:44.251Z,1469119904.251 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-07-21T16:51:44.261Z,1469119904.261 [DeadReckonUsingDVLWaterTrack](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:44.261Z,1469119904.261 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 4
2016-07-21T16:51:44.261Z,1469119904.261 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-07-21T16:51:44.302Z,1469119904.302 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-07-21T16:51:44.303Z,1469119904.303 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2016-07-21T16:51:44.303Z,1469119904.303 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToWater
2016-07-21T16:51:44.303Z,1469119904.303 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-07-21T16:51:44.303Z,1469119904.303 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-07-21T16:51:44.627Z,1469119904.627 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-07-21T16:51:44.627Z,1469119904.627 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 4
2016-07-21T16:51:44.628Z,1469119904.628 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2016-07-21T16:51:44.628Z,1469119904.628 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2016-07-21T16:51:44.628Z,1469119904.628 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToWater
2016-07-21T16:51:44.629Z,1469119904.629 [DeadReckonWithRespectToWater] No Fault, FailCount= 4
2016-07-21T16:51:44.629Z,1469119904.629 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-07-21T16:51:44.629Z,1469119904.629 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2016-07-21T16:51:44.630Z,1469119904.630 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-07-21T16:51:44.630Z,1469119904.630 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 4
2016-07-21T16:51:45.015Z,1469119905.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-07-21T16:51:45.015Z,1469119905.015 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-07-21T16:51:45.015Z,1469119905.015 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-07-21T16:51:45.016Z,1469119905.016 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2016-07-21T16:51:45.016Z,1469119905.016 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2016-07-21T16:51:45.021Z,1469119905.021 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2016-07-21T16:51:45.022Z,1469119905.022 [DeadReckonWithRespectToWater](DEBUG): Initializing DeadReckonWithRespectToWater component.
2016-07-21T16:51:45.022Z,1469119905.022 [DeadReckonWithRespectToWater](INFO): Will consider orientation measurement stale after 120s.
2016-07-21T16:51:45.022Z,1469119905.022 [DeadReckonWithRespectToWater](INFO): Will consider velocity measurement stale after 20s.
2016-07-21T16:51:45.023Z,1469119905.023 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-07-21T16:51:45.023Z,1469119905.023 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-07-21T16:51:45.023Z,1469119905.023 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-07-21T16:51:45.024Z,1469119905.024 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-07-21T16:51:45.024Z,1469119905.024 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-07-21T16:51:45.029Z,1469119905.029 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-07-21T16:51:45.402Z,1469119905.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-07-21T16:51:45.403Z,1469119905.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:45.826Z,1469119905.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-07-21T16:51:45.827Z,1469119905.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:46.227Z,1469119906.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-07-21T16:51:46.228Z,1469119906.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:46.640Z,1469119906.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-07-21T16:51:46.641Z,1469119906.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:47.027Z,1469119907.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-07-21T16:51:47.028Z,1469119907.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:47.407Z,1469119907.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-07-21T16:51:47.408Z,1469119907.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:47.806Z,1469119907.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-07-21T16:51:47.807Z,1469119907.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:48.210Z,1469119908.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-07-21T16:51:48.211Z,1469119908.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:48.613Z,1469119908.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-07-21T16:51:48.614Z,1469119908.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:49.042Z,1469119909.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-07-21T16:51:49.043Z,1469119909.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:49.448Z,1469119909.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-07-21T16:51:49.449Z,1469119909.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:49.815Z,1469119909.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-07-21T16:51:49.816Z,1469119909.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:50.207Z,1469119910.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-07-21T16:51:50.208Z,1469119910.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:50.597Z,1469119910.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-07-21T16:51:50.598Z,1469119910.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:50.821Z,1469119910.821 [NavChartDb](INFO): # of records loaded: 35000
2016-07-21T16:51:50.997Z,1469119910.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-07-21T16:51:50.998Z,1469119910.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:51.400Z,1469119911.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2016-07-21T16:51:51.403Z,1469119911.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:51.814Z,1469119911.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2016-07-21T16:51:51.815Z,1469119911.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:52.238Z,1469119912.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2016-07-21T16:51:52.239Z,1469119912.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:52.646Z,1469119912.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2016-07-21T16:51:52.647Z,1469119912.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:53.009Z,1469119913.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2016-07-21T16:51:53.010Z,1469119913.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:53.409Z,1469119913.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2016-07-21T16:51:53.410Z,1469119913.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:53.812Z,1469119913.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2016-07-21T16:51:53.814Z,1469119913.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:54.215Z,1469119914.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2016-07-21T16:51:54.216Z,1469119914.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:54.617Z,1469119914.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2016-07-21T16:51:54.618Z,1469119914.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:55.030Z,1469119915.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2016-07-21T16:51:55.031Z,1469119915.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:55.429Z,1469119915.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2016-07-21T16:51:55.430Z,1469119915.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:55.861Z,1469119915.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2016-07-21T16:51:55.862Z,1469119915.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:56.215Z,1469119916.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2016-07-21T16:51:56.216Z,1469119916.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:56.614Z,1469119916.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2016-07-21T16:51:56.615Z,1469119916.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:57.002Z,1469119917.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2016-07-21T16:51:57.003Z,1469119917.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:57.435Z,1469119917.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2016-07-21T16:51:57.436Z,1469119917.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:57.807Z,1469119917.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2016-07-21T16:51:57.808Z,1469119917.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:58.238Z,1469119918.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2016-07-21T16:51:58.239Z,1469119918.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:58.642Z,1469119918.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2016-07-21T16:51:58.643Z,1469119918.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:59.015Z,1469119919.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2016-07-21T16:51:59.016Z,1469119919.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:59.415Z,1469119919.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2016-07-21T16:51:59.416Z,1469119919.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:51:59.814Z,1469119919.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2016-07-21T16:51:59.815Z,1469119919.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:00.218Z,1469119920.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2016-07-21T16:52:00.219Z,1469119920.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:00.622Z,1469119920.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2016-07-21T16:52:00.623Z,1469119920.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:01.008Z,1469119921.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2016-07-21T16:52:01.013Z,1469119921.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:01.419Z,1469119921.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2016-07-21T16:52:01.420Z,1469119921.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:01.825Z,1469119921.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2016-07-21T16:52:01.826Z,1469119921.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:02.226Z,1469119922.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2016-07-21T16:52:02.227Z,1469119922.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:02.606Z,1469119922.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2016-07-21T16:52:02.607Z,1469119922.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:03.006Z,1469119923.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2016-07-21T16:52:03.007Z,1469119923.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:03.396Z,1469119923.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2016-07-21T16:52:03.396Z,1469119923.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:03.853Z,1469119923.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2016-07-21T16:52:03.854Z,1469119923.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:04.214Z,1469119924.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:04.611Z,1469119924.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:04.990Z,1469119924.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:05.412Z,1469119925.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:05.810Z,1469119925.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:06.225Z,1469119926.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:06.500Z,1469119926.500 [NavChartDb](INFO): # of records loaded: 40000
2016-07-21T16:52:06.608Z,1469119926.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:07.031Z,1469119927.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:07.435Z,1469119927.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:07.811Z,1469119927.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:08.200Z,1469119928.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:08.598Z,1469119928.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:09.003Z,1469119929.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:09.419Z,1469119929.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:09.843Z,1469119929.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:10.223Z,1469119930.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:10.618Z,1469119930.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:11.015Z,1469119931.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:11.411Z,1469119931.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:11.811Z,1469119931.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:12.230Z,1469119932.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:12.619Z,1469119932.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:13.027Z,1469119933.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:13.426Z,1469119933.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:13.834Z,1469119933.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:14.199Z,1469119934.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:14.610Z,1469119934.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:15.007Z,1469119935.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:15.419Z,1469119935.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:15.810Z,1469119935.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:16.219Z,1469119936.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:16.623Z,1469119936.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:17.019Z,1469119937.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:17.415Z,1469119937.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:17.807Z,1469119937.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:18.206Z,1469119938.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:18.631Z,1469119938.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:19.039Z,1469119939.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:19.112Z,1469119939.112 [NavChartDb](INFO): # of records loaded: 45000
2016-07-21T16:52:19.434Z,1469119939.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:19.811Z,1469119939.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:20.207Z,1469119940.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:20.607Z,1469119940.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:21.010Z,1469119941.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:21.410Z,1469119941.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:21.831Z,1469119941.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:22.225Z,1469119942.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:22.617Z,1469119942.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:23.018Z,1469119943.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:23.394Z,1469119943.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:23.826Z,1469119943.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:24.205Z,1469119944.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:24.627Z,1469119944.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:25.006Z,1469119945.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:25.413Z,1469119945.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:25.816Z,1469119945.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:26.228Z,1469119946.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:26.625Z,1469119946.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:27.010Z,1469119947.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:27.412Z,1469119947.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:27.823Z,1469119947.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:28.216Z,1469119948.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:28.612Z,1469119948.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:28.998Z,1469119948.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:29.400Z,1469119949.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:33.648Z,1469119953.648 [NavChartDb](INFO): # of records loaded: 50000
2016-07-21T16:52:35.139Z,1469119955.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:35.269Z,1469119955.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:35.632Z,1469119955.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:36.036Z,1469119956.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:36.436Z,1469119956.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:36.850Z,1469119956.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:37.245Z,1469119957.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:37.633Z,1469119957.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:38.044Z,1469119958.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:38.451Z,1469119958.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:38.815Z,1469119958.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:39.214Z,1469119959.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:39.647Z,1469119959.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:40.050Z,1469119960.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:40.465Z,1469119960.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:40.826Z,1469119960.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:41.224Z,1469119961.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:41.626Z,1469119961.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:42.036Z,1469119962.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:42.435Z,1469119962.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:42.826Z,1469119962.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:43.231Z,1469119963.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:43.651Z,1469119963.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:44.040Z,1469119964.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:44.430Z,1469119964.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:44.843Z,1469119964.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:45.238Z,1469119965.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:45.636Z,1469119965.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:46.036Z,1469119966.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:46.447Z,1469119966.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:46.839Z,1469119966.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:47.235Z,1469119967.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:47.644Z,1469119967.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:48.047Z,1469119968.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:48.449Z,1469119968.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:48.846Z,1469119968.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:48.851Z,1469119968.851 [NavChartDb](INFO): # of records loaded: 55000
2016-07-21T16:52:49.245Z,1469119969.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:49.647Z,1469119969.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:50.038Z,1469119970.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:50.443Z,1469119970.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:50.838Z,1469119970.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:51.214Z,1469119971.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:51.656Z,1469119971.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:52.047Z,1469119972.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:52.458Z,1469119972.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:52.830Z,1469119972.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:53.234Z,1469119973.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:53.674Z,1469119973.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:54.073Z,1469119974.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:54.435Z,1469119974.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:54.838Z,1469119974.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:55.227Z,1469119975.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:55.635Z,1469119975.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:56.058Z,1469119976.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:56.447Z,1469119976.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:56.835Z,1469119976.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:57.235Z,1469119977.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:57.658Z,1469119977.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:58.059Z,1469119978.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:58.470Z,1469119978.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:58.822Z,1469119978.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:58.988Z,1469119978.988 [NavChartDb](INFO): Calculating coverage of Resources/ElectronicNavigationCharts/US4AK5QM.000
2016-07-21T16:52:59.223Z,1469119979.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:52:59.652Z,1469119979.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:00.062Z,1469119980.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:00.463Z,1469119980.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:00.838Z,1469119980.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:01.232Z,1469119981.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:01.624Z,1469119981.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:02.065Z,1469119982.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:02.429Z,1469119982.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:02.872Z,1469119982.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:03.244Z,1469119983.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:03.642Z,1469119983.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:04.032Z,1469119984.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:04.421Z,1469119984.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:04.859Z,1469119984.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:04.938Z,1469119984.938 [NavChartDb](INFO): # of records loaded: 60000
2016-07-21T16:53:05.249Z,1469119985.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:05.642Z,1469119985.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:06.033Z,1469119986.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:06.438Z,1469119986.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:06.843Z,1469119986.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:07.246Z,1469119987.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:07.652Z,1469119987.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:08.027Z,1469119988.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:08.458Z,1469119988.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:08.867Z,1469119988.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:09.267Z,1469119989.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:09.658Z,1469119989.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:10.024Z,1469119990.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:10.424Z,1469119990.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:10.827Z,1469119990.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:11.223Z,1469119991.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:11.631Z,1469119991.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:12.042Z,1469119992.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:12.431Z,1469119992.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:12.845Z,1469119992.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:13.243Z,1469119993.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:13.643Z,1469119993.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:14.034Z,1469119994.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:14.443Z,1469119994.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:14.867Z,1469119994.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:15.255Z,1469119995.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:15.652Z,1469119995.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:16.056Z,1469119996.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:16.434Z,1469119996.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:16.859Z,1469119996.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:17.261Z,1469119997.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:17.660Z,1469119997.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:18.043Z,1469119998.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:18.443Z,1469119998.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:18.834Z,1469119998.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:19.231Z,1469119999.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:19.531Z,1469119999.531 [NavChartDb](INFO): Done scanning edges of Resources/ElectronicNavigationCharts/US4AK5QM.000
2016-07-21T16:53:19.636Z,1469119999.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:20.038Z,1469120000.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:20.438Z,1469120000.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:20.843Z,1469120000.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:21.247Z,1469120001.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:21.643Z,1469120001.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:22.030Z,1469120002.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:22.435Z,1469120002.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:22.837Z,1469120002.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:23.247Z,1469120003.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:23.363Z,1469120003.364 [NavChartDb](INFO): # of records loaded: 65000
2016-07-21T16:53:23.643Z,1469120003.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:24.043Z,1469120004.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:24.447Z,1469120004.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:24.847Z,1469120004.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:25.227Z,1469120005.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:25.623Z,1469120005.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:26.056Z,1469120006.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:26.430Z,1469120006.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:26.825Z,1469120006.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:27.259Z,1469120007.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:27.629Z,1469120007.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:28.020Z,1469120008.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:28.439Z,1469120008.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:28.444Z,1469120008.444 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-07-21T16:53:28.444Z,1469120008.444 [Default:CheckIn:C.Wait] Stopped
2016-07-21T16:53:28.444Z,1469120008.444 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-07-21T16:53:28.444Z,1469120008.444 [Default:CheckIn:D] Running Loop=1
2016-07-21T16:53:28.827Z,1469120008.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:28.833Z,1469120008.833 [Default:CheckIn:D] Stopped
2016-07-21T16:53:28.834Z,1469120008.833 [Default:CheckIn:E] Running Loop=1
2016-07-21T16:53:29.226Z,1469120009.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:29.232Z,1469120009.232 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 10.654837 min 
2016-07-21T16:53:29.234Z,1469120009.234 [Default:CheckIn:E] Stopped
2016-07-21T16:53:29.234Z,1469120009.234 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-07-21T16:53:29.234Z,1469120009.234 [Default:CheckIn] Stopped
2016-07-21T16:53:29.234Z,1469120009.234 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-07-21T16:53:29.234Z,1469120009.234 [Default:CheckIn](INFO): Running loop #2
2016-07-21T16:53:29.234Z,1469120009.234 [Default:CheckIn] Running Loop=2
2016-07-21T16:53:29.235Z,1469120009.235 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-07-21T16:53:29.235Z,1469120009.235 [Default:CheckIn:Read_GPS] Running Loop=1
2016-07-21T16:53:29.646Z,1469120009.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:35.030Z,1469120015.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:35.156Z,1469120015.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:35.535Z,1469120015.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:35.933Z,1469120015.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:36.311Z,1469120016.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:36.727Z,1469120016.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:37.130Z,1469120017.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:37.527Z,1469120017.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:37.927Z,1469120017.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:38.327Z,1469120018.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:38.699Z,1469120018.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:39.135Z,1469120019.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:39.507Z,1469120019.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:39.941Z,1469120019.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:40.345Z,1469120020.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:40.715Z,1469120020.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:41.106Z,1469120021.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:41.503Z,1469120021.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:41.913Z,1469120021.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:42.315Z,1469120022.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:42.714Z,1469120022.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:43.110Z,1469120023.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:43.514Z,1469120023.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:43.898Z,1469120023.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:44.303Z,1469120024.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:44.696Z,1469120024.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:45.115Z,1469120025.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:45.519Z,1469120025.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:45.917Z,1469120025.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:46.317Z,1469120026.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:46.716Z,1469120026.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:47.104Z,1469120027.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:47.503Z,1469120027.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:47.898Z,1469120027.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:48.303Z,1469120028.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:48.706Z,1469120028.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:49.112Z,1469120029.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:49.510Z,1469120029.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:49.927Z,1469120029.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:50.301Z,1469120030.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:50.703Z,1469120030.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:51.106Z,1469120031.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:51.518Z,1469120031.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:51.911Z,1469120031.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:52.320Z,1469120032.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:52.700Z,1469120032.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:53.106Z,1469120033.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:53.518Z,1469120033.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:53.917Z,1469120033.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:54.330Z,1469120034.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:54.727Z,1469120034.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:55.131Z,1469120035.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:55.505Z,1469120035.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:55.960Z,1469120035.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:56.328Z,1469120036.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:56.699Z,1469120036.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:57.115Z,1469120037.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:57.381Z,1469120037.381 [NavChartDb](INFO): # of records loaded: 70000
2016-07-21T16:53:57.511Z,1469120037.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:57.909Z,1469120037.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:58.320Z,1469120038.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:58.713Z,1469120038.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:59.105Z,1469120039.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:59.518Z,1469120039.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:53:59.948Z,1469120039.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:00.331Z,1469120040.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:00.704Z,1469120040.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:01.104Z,1469120041.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:01.507Z,1469120041.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:01.909Z,1469120041.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:02.309Z,1469120042.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:02.707Z,1469120042.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:03.090Z,1469120043.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:03.510Z,1469120043.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:03.913Z,1469120043.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:04.313Z,1469120044.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:04.715Z,1469120044.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:05.092Z,1469120045.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:05.509Z,1469120045.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:05.923Z,1469120045.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:06.317Z,1469120046.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:06.694Z,1469120046.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:07.105Z,1469120047.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:07.504Z,1469120047.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:07.906Z,1469120047.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:08.319Z,1469120048.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:08.704Z,1469120048.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:09.118Z,1469120049.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:09.516Z,1469120049.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:09.927Z,1469120049.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:10.326Z,1469120050.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:10.691Z,1469120050.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:11.123Z,1469120051.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:11.535Z,1469120051.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:11.926Z,1469120051.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:12.335Z,1469120052.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:12.690Z,1469120052.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:13.102Z,1469120053.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:13.503Z,1469120053.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:13.934Z,1469120053.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:14.315Z,1469120054.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:14.711Z,1469120054.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:15.098Z,1469120055.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:15.316Z,1469120055.316 [NavChartDb](INFO): Done scanning nodes of Resources/ElectronicNavigationCharts/US4AK5QM.000
2016-07-21T16:54:15.411Z,1469120055.411 [NavChartDb](INFO): # of records loaded: 73085
2016-07-21T16:54:15.444Z,1469120055.444 [NavChartDb](IMPORTANT): Loaded Electronic Nav Chart data from US4AK5QM.000
2016-07-21T16:54:15.447Z,1469120055.447 [NavChartDb](INFO): Setup scan of Resources/ElectronicNavigationCharts/US4AK5JM.000
2016-07-21T16:54:15.526Z,1469120055.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:15.911Z,1469120055.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:16.334Z,1469120056.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:16.705Z,1469120056.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:17.106Z,1469120057.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:17.510Z,1469120057.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:17.899Z,1469120057.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:18.299Z,1469120058.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:18.744Z,1469120058.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:19.135Z,1469120059.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:19.431Z,1469120059.431 [NavChartDb](INFO): Done scanning features of Resources/ElectronicNavigationCharts/US4AK5JM.000
2016-07-21T16:54:19.545Z,1469120059.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:19.926Z,1469120059.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:20.319Z,1469120060.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:20.704Z,1469120060.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:21.111Z,1469120061.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:21.516Z,1469120061.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:21.920Z,1469120061.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:22.318Z,1469120062.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:22.722Z,1469120062.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:23.099Z,1469120063.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:23.502Z,1469120063.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:23.926Z,1469120063.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:24.317Z,1469120064.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:24.690Z,1469120064.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:25.126Z,1469120065.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:25.512Z,1469120065.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:25.947Z,1469120065.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:26.323Z,1469120066.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:26.703Z,1469120066.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:27.102Z,1469120067.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:27.529Z,1469120067.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:27.906Z,1469120067.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:28.336Z,1469120068.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:28.736Z,1469120068.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:29.119Z,1469120069.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:29.522Z,1469120069.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:29.918Z,1469120069.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:33.356Z,1469120073.356 [NavChartDb](INFO): # of records loaded: 5000
2016-07-21T16:54:36.162Z,1469120076.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:36.291Z,1469120076.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:36.654Z,1469120076.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:37.083Z,1469120077.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:37.481Z,1469120077.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:37.842Z,1469120077.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:38.246Z,1469120078.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:38.649Z,1469120078.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:39.052Z,1469120079.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:39.459Z,1469120079.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:39.867Z,1469120079.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:40.271Z,1469120080.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:40.655Z,1469120080.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:41.071Z,1469120081.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:41.489Z,1469120081.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:41.542Z,1469120081.542 [CBIT](INFO): Clearing failed state for component DropWeight
2016-07-21T16:54:41.542Z,1469120081.542 [DropWeight] No Fault, FailCount= 1
2016-07-21T16:54:41.805Z,1469120081.805 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2016-07-21T16:54:41.805Z,1469120081.805 [DropWeight] Hardware Fault, FailCount= 1
2016-07-21T16:54:41.805Z,1469120081.805 [DropWeight](ERROR): Hardware Fault
2016-07-21T16:54:41.887Z,1469120081.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:41.935Z,1469120081.935 [CBIT](ERROR): Hardware Fault in component: DropWeight
2016-07-21T16:54:41.936Z,1469120081.936 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2016-07-21T16:54:42.320Z,1469120082.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:42.670Z,1469120082.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:43.059Z,1469120083.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:43.452Z,1469120083.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:43.872Z,1469120083.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:44.230Z,1469120084.230 [CommandLine](IMPORTANT): got command failComponent
2016-07-21T16:54:44.231Z,1469120084.231 [CommandLine](IMPORTANT): Failed components:
2016-07-21T16:54:44.231Z,1469120084.231 [CommandLine](IMPORTANT): DropWeight: Hardware Fault
2016-07-21T16:54:44.231Z,1469120084.231 [CommandLine](IMPORTANT): Rowe_600LCM: Hardware Fault
2016-07-21T16:54:44.231Z,1469120084.231 [CommandLine](IMPORTANT): BPC1: Communications Fault
2016-07-21T16:54:44.283Z,1469120084.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:44.652Z,1469120084.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:44.790Z,1469120084.790 [NavChartDb](INFO): # of records loaded: 10000
2016-07-21T16:54:45.048Z,1469120085.048 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:45.048Z,1469120085.048 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 5
2016-07-21T16:54:45.048Z,1469120085.048 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-07-21T16:54:45.062Z,1469120085.062 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:45.062Z,1469120085.062 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2016-07-21T16:54:45.062Z,1469120085.062 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2016-07-21T16:54:45.064Z,1469120085.064 [DeadReckonWithRespectToWater](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:45.064Z,1469120085.064 [DeadReckonWithRespectToWater] Software Fault, FailCount= 5
2016-07-21T16:54:45.064Z,1469120085.064 [DeadReckonWithRespectToWater](ERROR): Software Fault
2016-07-21T16:54:45.111Z,1469120085.111 [DeadReckonWithRespectToSeafloor](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:45.111Z,1469120085.111 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2016-07-21T16:54:45.111Z,1469120085.111 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-07-21T16:54:45.113Z,1469120085.113 [DeadReckonUsingDVLWaterTrack](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:45.113Z,1469120085.113 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 5
2016-07-21T16:54:45.113Z,1469120085.113 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-07-21T16:54:45.154Z,1469120085.154 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-07-21T16:54:45.154Z,1469120085.154 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2016-07-21T16:54:45.155Z,1469120085.155 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToWater
2016-07-21T16:54:45.155Z,1469120085.155 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-07-21T16:54:45.155Z,1469120085.155 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-07-21T16:54:45.475Z,1469120085.475 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-07-21T16:54:45.475Z,1469120085.475 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 5
2016-07-21T16:54:45.476Z,1469120085.476 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2016-07-21T16:54:45.476Z,1469120085.476 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2016-07-21T16:54:45.476Z,1469120085.476 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToWater
2016-07-21T16:54:45.477Z,1469120085.477 [DeadReckonWithRespectToWater] No Fault, FailCount= 5
2016-07-21T16:54:45.497Z,1469120085.497 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-07-21T16:54:45.497Z,1469120085.497 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2016-07-21T16:54:45.498Z,1469120085.498 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-07-21T16:54:45.498Z,1469120085.498 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 5
2016-07-21T16:54:45.909Z,1469120085.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-07-21T16:54:45.909Z,1469120085.909 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-07-21T16:54:45.910Z,1469120085.910 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-07-21T16:54:45.910Z,1469120085.910 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2016-07-21T16:54:45.911Z,1469120085.911 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2016-07-21T16:54:45.911Z,1469120085.911 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2016-07-21T16:54:45.911Z,1469120085.911 [DeadReckonWithRespectToWater](DEBUG): Initializing DeadReckonWithRespectToWater component.
2016-07-21T16:54:45.912Z,1469120085.912 [DeadReckonWithRespectToWater](INFO): Will consider orientation measurement stale after 120s.
2016-07-21T16:54:45.912Z,1469120085.912 [DeadReckonWithRespectToWater](INFO): Will consider velocity measurement stale after 20s.
2016-07-21T16:54:45.913Z,1469120085.912 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-07-21T16:54:45.917Z,1469120085.917 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-07-21T16:54:45.918Z,1469120085.918 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-07-21T16:54:45.918Z,1469120085.918 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-07-21T16:54:45.918Z,1469120085.918 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-07-21T16:54:45.919Z,1469120085.919 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-07-21T16:54:46.249Z,1469120086.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-07-21T16:54:46.250Z,1469120086.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:46.674Z,1469120086.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-07-21T16:54:46.675Z,1469120086.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:47.053Z,1469120087.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-07-21T16:54:47.054Z,1469120087.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:47.462Z,1469120087.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-07-21T16:54:47.463Z,1469120087.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:47.882Z,1469120087.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-07-21T16:54:47.883Z,1469120087.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:48.262Z,1469120088.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-07-21T16:54:48.263Z,1469120088.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:48.646Z,1469120088.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-07-21T16:54:48.647Z,1469120088.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:49.042Z,1469120089.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-07-21T16:54:49.043Z,1469120089.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:49.452Z,1469120089.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-07-21T16:54:49.453Z,1469120089.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:49.864Z,1469120089.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-07-21T16:54:49.865Z,1469120089.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:50.250Z,1469120090.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-07-21T16:54:50.252Z,1469120090.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:50.642Z,1469120090.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-07-21T16:54:50.643Z,1469120090.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:51.064Z,1469120091.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-07-21T16:54:51.065Z,1469120091.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:51.474Z,1469120091.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-07-21T16:54:51.475Z,1469120091.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:51.878Z,1469120091.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-07-21T16:54:51.879Z,1469120091.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:52.252Z,1469120092.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2016-07-21T16:54:52.281Z,1469120092.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:52.652Z,1469120092.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2016-07-21T16:54:52.657Z,1469120092.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:53.051Z,1469120093.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2016-07-21T16:54:53.052Z,1469120093.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:53.202Z,1469120093.202 [CommandLine](IMPORTANT): got command failComponent
2016-07-21T16:54:53.202Z,1469120093.202 [CommandLine](IMPORTANT): Failed components:
2016-07-21T16:54:53.202Z,1469120093.202 [CommandLine](IMPORTANT): DropWeight: Hardware Fault
2016-07-21T16:54:53.202Z,1469120093.202 [CommandLine](IMPORTANT): Rowe_600LCM: Hardware Fault
2016-07-21T16:54:53.203Z,1469120093.203 [CommandLine](IMPORTANT): BPC1: Communications Fault
2016-07-21T16:54:53.475Z,1469120093.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2016-07-21T16:54:53.476Z,1469120093.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:53.870Z,1469120093.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2016-07-21T16:54:53.871Z,1469120093.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:54.250Z,1469120094.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2016-07-21T16:54:54.251Z,1469120094.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:54.675Z,1469120094.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2016-07-21T16:54:54.676Z,1469120094.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:55.090Z,1469120095.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2016-07-21T16:54:55.091Z,1469120095.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:55.446Z,1469120095.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2016-07-21T16:54:55.447Z,1469120095.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:55.862Z,1469120095.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2016-07-21T16:54:55.863Z,1469120095.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:56.143Z,1469120096.143 [CommandLine](IMPORTANT): got command failComponent none BPC1
2016-07-21T16:54:56.143Z,1469120096.143 [BPC1] No Fault, FailCount= 10
2016-07-21T16:54:56.144Z,1469120096.144 [CommandLine](IMPORTANT): BPC1 failureMode is No Fault
2016-07-21T16:54:56.331Z,1469120096.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2016-07-21T16:54:56.332Z,1469120096.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:56.642Z,1469120096.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2016-07-21T16:54:56.643Z,1469120096.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:57.042Z,1469120097.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2016-07-21T16:54:57.043Z,1469120097.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:57.464Z,1469120097.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2016-07-21T16:54:57.465Z,1469120097.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:57.890Z,1469120097.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2016-07-21T16:54:57.891Z,1469120097.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:58.263Z,1469120098.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2016-07-21T16:54:58.264Z,1469120098.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:58.646Z,1469120098.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2016-07-21T16:54:58.647Z,1469120098.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:58.719Z,1469120098.719 [NavChartDb](INFO): # of records loaded: 15000
2016-07-21T16:54:59.051Z,1469120099.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2016-07-21T16:54:59.052Z,1469120099.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:59.451Z,1469120099.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2016-07-21T16:54:59.452Z,1469120099.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:54:59.848Z,1469120099.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2016-07-21T16:54:59.850Z,1469120099.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:00.254Z,1469120100.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2016-07-21T16:55:00.255Z,1469120100.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:00.659Z,1469120100.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2016-07-21T16:55:00.660Z,1469120100.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:01.058Z,1469120101.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2016-07-21T16:55:01.059Z,1469120101.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:01.463Z,1469120101.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2016-07-21T16:55:01.464Z,1469120101.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:01.846Z,1469120101.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2016-07-21T16:55:01.847Z,1469120101.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:02.274Z,1469120102.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2016-07-21T16:55:02.275Z,1469120102.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:02.668Z,1469120102.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2016-07-21T16:55:02.669Z,1469120102.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:03.046Z,1469120103.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2016-07-21T16:55:03.047Z,1469120103.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:03.446Z,1469120103.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2016-07-21T16:55:03.447Z,1469120103.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:03.867Z,1469120103.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2016-07-21T16:55:03.868Z,1469120103.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:04.265Z,1469120104.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2016-07-21T16:55:04.266Z,1469120104.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:04.672Z,1469120104.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2016-07-21T16:55:04.677Z,1469120104.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:05.077Z,1469120105.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:05.478Z,1469120105.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:05.847Z,1469120105.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:06.242Z,1469120106.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:06.654Z,1469120106.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:07.071Z,1469120107.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:07.491Z,1469120107.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:07.887Z,1469120107.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:08.255Z,1469120108.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:08.654Z,1469120108.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:09.047Z,1469120109.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:09.436Z,1469120109.436 [NavChartDb](INFO): # of records loaded: 20000
2016-07-21T16:55:09.475Z,1469120109.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:09.834Z,1469120109.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:10.234Z,1469120110.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:10.665Z,1469120110.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:10.743Z,1469120110.743 [CommandLine](IMPORTANT): got command failComponent none DropWeight
2016-07-21T16:55:10.743Z,1469120110.743 [DropWeight] No Fault, FailCount= 1
2016-07-21T16:55:10.743Z,1469120110.743 [CommandLine](IMPORTANT): DropWeight failureMode is No Fault
2016-07-21T16:55:11.010Z,1469120111.010 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2016-07-21T16:55:11.010Z,1469120111.010 [DropWeight] Hardware Fault, FailCount= 2
2016-07-21T16:55:11.010Z,1469120111.010 [DropWeight](ERROR): Hardware Fault
2016-07-21T16:55:11.086Z,1469120111.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:11.131Z,1469120111.131 [CBIT](ERROR): Hardware Fault in component: DropWeight
2016-07-21T16:55:11.478Z,1469120111.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:11.844Z,1469120111.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:12.255Z,1469120112.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:12.644Z,1469120112.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:13.034Z,1469120113.034 [BPC1](ERROR): Failed to receive battery data
2016-07-21T16:55:13.034Z,1469120113.034 [BPC1] Communications Fault, FailCount= 11
2016-07-21T16:55:13.034Z,1469120113.034 [BPC1](ERROR): Communications Fault
2016-07-21T16:55:13.051Z,1469120113.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:13.124Z,1469120113.124 [CBIT](ERROR): Communications Fault in component: BPC1
2016-07-21T16:55:13.124Z,1469120113.124 [CBIT](CRITICAL): Communications Fault in component: BPC1
2016-07-21T16:55:13.451Z,1469120113.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:13.603Z,1469120113.603 [CommandLine](IMPORTANT): got command failComponent none DropWeight
2016-07-21T16:55:13.603Z,1469120113.603 [DropWeight] No Fault, FailCount= 2
2016-07-21T16:55:13.604Z,1469120113.603 [CommandLine](IMPORTANT): DropWeight failureMode is No Fault
2016-07-21T16:55:13.802Z,1469120113.802 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2016-07-21T16:55:13.802Z,1469120113.802 [DropWeight] Hardware Fault, FailCount= 3
2016-07-21T16:55:13.802Z,1469120113.802 [DropWeight](ERROR): Hardware Fault
2016-07-21T16:55:13.905Z,1469120113.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:13.949Z,1469120113.949 [CBIT](ERROR): Hardware Fault in component: DropWeight
2016-07-21T16:55:14.278Z,1469120114.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:14.682Z,1469120114.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:15.084Z,1469120115.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:15.430Z,1469120115.430 [CommandLine](IMPORTANT): got command failComponent none DropWeight
2016-07-21T16:55:15.430Z,1469120115.430 [DropWeight] No Fault, FailCount= 3
2016-07-21T16:55:15.430Z,1469120115.430 [CommandLine](IMPORTANT): DropWeight failureMode is No Fault
2016-07-21T16:55:15.484Z,1469120115.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:15.802Z,1469120115.802 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2016-07-21T16:55:15.802Z,1469120115.802 [DropWeight] Hardware Fault, FailCount= 4
2016-07-21T16:55:15.802Z,1469120115.802 [DropWeight](ERROR): Hardware Fault
2016-07-21T16:55:15.880Z,1469120115.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:15.939Z,1469120115.939 [CBIT](ERROR): Hardware Fault in component: DropWeight
2016-07-21T16:55:15.940Z,1469120115.940 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2016-07-21T16:55:16.243Z,1469120116.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:16.651Z,1469120116.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:17.054Z,1469120117.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:17.456Z,1469120117.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:17.846Z,1469120117.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:18.267Z,1469120118.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:18.647Z,1469120118.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:19.047Z,1469120119.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:19.477Z,1469120119.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:19.615Z,1469120119.615 [CommandLine](IMPORTANT): got command failComponent
2016-07-21T16:55:19.615Z,1469120119.615 [CommandLine](IMPORTANT): Failed components:
2016-07-21T16:55:19.615Z,1469120119.615 [CommandLine](IMPORTANT): DropWeight: Hardware Fault
2016-07-21T16:55:19.615Z,1469120119.615 [CommandLine](IMPORTANT): Rowe_600LCM: Hardware Fault
2016-07-21T16:55:19.616Z,1469120119.616 [CommandLine](IMPORTANT): BPC1: Communications Fault
2016-07-21T16:55:19.879Z,1469120119.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:20.282Z,1469120120.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:20.655Z,1469120120.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:20.949Z,1469120120.949 [NavChartDb](INFO): # of records loaded: 25000
2016-07-21T16:55:21.055Z,1469120121.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:21.449Z,1469120121.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:21.855Z,1469120121.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:22.242Z,1469120122.242 [CommandLine](IMPORTANT): got command failComponent none DropWeight
2016-07-21T16:55:22.242Z,1469120122.242 [DropWeight] No Fault, FailCount= 4
2016-07-21T16:55:22.242Z,1469120122.242 [CommandLine](IMPORTANT): DropWeight failureMode is No Fault
2016-07-21T16:55:22.285Z,1469120122.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:22.602Z,1469120122.602 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2016-07-21T16:55:22.602Z,1469120122.602 [DropWeight] Hardware Fault, FailCount= 5
2016-07-21T16:55:22.602Z,1469120122.602 [DropWeight](ERROR): Hardware Fault
2016-07-21T16:55:22.706Z,1469120122.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:22.746Z,1469120122.746 [CBIT](ERROR): Hardware Fault in component: DropWeight
2016-07-21T16:55:22.747Z,1469120122.747 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2016-07-21T16:55:23.055Z,1469120123.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:23.467Z,1469120123.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:23.853Z,1469120123.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:24.255Z,1469120124.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:24.660Z,1469120124.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:25.058Z,1469120125.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:25.483Z,1469120125.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:25.867Z,1469120125.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:26.214Z,1469120126.214 [CommandLine](IMPORTANT): got command failComponent none DropWeight
2016-07-21T16:55:26.214Z,1469120126.214 [DropWeight] No Fault, FailCount= 5
2016-07-21T16:55:26.214Z,1469120126.214 [CommandLine](IMPORTANT): DropWeight failureMode is No Fault
2016-07-21T16:55:26.287Z,1469120126.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:26.602Z,1469120126.602 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2016-07-21T16:55:26.602Z,1469120126.602 [DropWeight] Hardware Fault, FailCount= 6
2016-07-21T16:55:26.602Z,1469120126.602 [DropWeight](ERROR): Hardware Fault
2016-07-21T16:55:26.680Z,1469120126.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:26.739Z,1469120126.739 [CBIT](ERROR): Hardware Fault in component: DropWeight
2016-07-21T16:55:26.739Z,1469120126.739 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2016-07-21T16:55:27.047Z,1469120127.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:27.451Z,1469120127.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:27.855Z,1469120127.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:28.226Z,1469120128.226 [CommandLine](IMPORTANT): got command failComponent none DropWeight
2016-07-21T16:55:28.226Z,1469120128.226 [DropWeight] No Fault, FailCount= 6
2016-07-21T16:55:28.226Z,1469120128.226 [CommandLine](IMPORTANT): DropWeight failureMode is No Fault
2016-07-21T16:55:28.298Z,1469120128.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:28.602Z,1469120128.602 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2016-07-21T16:55:28.602Z,1469120128.602 [DropWeight] Hardware Fault, FailCount= 7
2016-07-21T16:55:28.602Z,1469120128.602 [DropWeight](ERROR): Hardware Fault
2016-07-21T16:55:28.692Z,1469120128.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:28.742Z,1469120128.741 [CBIT](ERROR): Hardware Fault in component: DropWeight
2016-07-21T16:55:28.742Z,1469120128.742 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2016-07-21T16:55:29.071Z,1469120129.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:29.475Z,1469120129.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:29.851Z,1469120129.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:30.271Z,1469120130.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:31.150Z,1469120131.150 [NavChartDb](INFO): # of records loaded: 30000
2016-07-21T16:55:31.542Z,1469120131.542 [CommandLine](IMPORTANT): got command failComponent none DropWeight
2016-07-21T16:55:31.542Z,1469120131.542 [DropWeight] No Fault, FailCount= 7
2016-07-21T16:55:31.542Z,1469120131.542 [CommandLine](IMPORTANT): DropWeight failureMode is No Fault
2016-07-21T16:55:34.125Z,1469120134.125 [CommandLine](IMPORTANT): got command failComponent
2016-07-21T16:55:34.126Z,1469120134.126 [CommandLine](IMPORTANT): Failed components:
2016-07-21T16:55:34.126Z,1469120134.126 [CommandLine](IMPORTANT): Rowe_600LCM: Hardware Fault
2016-07-21T16:55:34.126Z,1469120134.126 [CommandLine](IMPORTANT): BPC1: Communications Fault
2016-07-21T16:55:36.542Z,1469120136.542 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2016-07-21T16:55:36.542Z,1469120136.542 [DropWeight] Hardware Fault, FailCount= 8
2016-07-21T16:55:36.542Z,1469120136.542 [DropWeight](ERROR): Hardware Fault
2016-07-21T16:55:36.621Z,1469120136.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:36.649Z,1469120136.649 [CBIT](ERROR): Hardware Fault in component: DropWeight
2016-07-21T16:55:36.750Z,1469120136.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:37.140Z,1469120137.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:37.565Z,1469120137.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:37.959Z,1469120137.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:38.351Z,1469120138.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:38.762Z,1469120138.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:39.128Z,1469120139.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:39.543Z,1469120139.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:39.977Z,1469120139.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:40.346Z,1469120140.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:40.741Z,1469120140.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:41.135Z,1469120141.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:41.537Z,1469120141.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:41.947Z,1469120141.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:42.349Z,1469120142.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:42.402Z,1469120142.402 [CommandLine](IMPORTANT): got command failComponent
2016-07-21T16:55:42.402Z,1469120142.402 [CommandLine](IMPORTANT): Failed components:
2016-07-21T16:55:42.402Z,1469120142.402 [CommandLine](IMPORTANT): DropWeight: Hardware Fault
2016-07-21T16:55:42.402Z,1469120142.402 [CommandLine](IMPORTANT): Rowe_600LCM: Hardware Fault
2016-07-21T16:55:42.403Z,1469120142.402 [CommandLine](IMPORTANT): BPC1: Communications Fault
2016-07-21T16:55:42.756Z,1469120142.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:43.155Z,1469120143.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:43.246Z,1469120143.246 [NavChartDb](INFO): # of records loaded: 35000
2016-07-21T16:55:43.550Z,1469120143.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:43.952Z,1469120143.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:44.349Z,1469120144.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:44.763Z,1469120144.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:45.153Z,1469120145.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:45.551Z,1469120145.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:45.956Z,1469120145.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:46.362Z,1469120146.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:46.768Z,1469120146.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:47.026Z,1469120147.026 [CommandLine](IMPORTANT): got command failComponent none DropWeight
2016-07-21T16:55:47.026Z,1469120147.026 [DropWeight] No Fault, FailCount= 8
2016-07-21T16:55:47.026Z,1469120147.026 [CommandLine](IMPORTANT): DropWeight failureMode is No Fault
2016-07-21T16:55:47.091Z,1469120147.091 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2016-07-21T16:55:47.091Z,1469120147.091 [DropWeight] Hardware Fault, FailCount= 9
2016-07-21T16:55:47.091Z,1469120147.091 [DropWeight](ERROR): Hardware Fault
2016-07-21T16:55:47.177Z,1469120147.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:47.229Z,1469120147.229 [CBIT](ERROR): Hardware Fault in component: DropWeight
2016-07-21T16:55:47.535Z,1469120147.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:47.947Z,1469120147.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:48.343Z,1469120148.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:48.754Z,1469120148.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:49.144Z,1469120149.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:49.539Z,1469120149.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:49.928Z,1469120149.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:50.364Z,1469120150.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:50.738Z,1469120150.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:51.151Z,1469120151.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:51.357Z,1469120151.357 [CommandLine](IMPORTANT): got command failComponent none DropWeight
2016-07-21T16:55:51.357Z,1469120151.357 [DropWeight] No Fault, FailCount= 9
2016-07-21T16:55:51.357Z,1469120151.357 [CommandLine](IMPORTANT): DropWeight failureMode is No Fault
2016-07-21T16:55:51.490Z,1469120151.490 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2016-07-21T16:55:51.490Z,1469120151.490 [DropWeight] Hardware Fault, FailCount= 10
2016-07-21T16:55:51.490Z,1469120151.490 [DropWeight](ERROR): Hardware Fault
2016-07-21T16:55:51.558Z,1469120151.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:51.607Z,1469120151.607 [CBIT](ERROR): Hardware Fault in component: DropWeight
2016-07-21T16:55:51.944Z,1469120151.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:52.359Z,1469120152.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:52.765Z,1469120152.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:53.154Z,1469120153.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:53.171Z,1469120153.171 [CommandLine](IMPORTANT): got command failComponent
2016-07-21T16:55:53.171Z,1469120153.171 [CommandLine](IMPORTANT): Failed components:
2016-07-21T16:55:53.171Z,1469120153.171 [CommandLine](IMPORTANT): DropWeight: Hardware Fault
2016-07-21T16:55:53.171Z,1469120153.171 [CommandLine](IMPORTANT): Rowe_600LCM: Hardware Fault
2016-07-21T16:55:53.172Z,1469120153.172 [CommandLine](IMPORTANT): BPC1: Communications Fault
2016-07-21T16:55:53.553Z,1469120153.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:53.708Z,1469120153.708 [NavChartDb](INFO): # of records loaded: 40000
2016-07-21T16:55:53.955Z,1469120153.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:54.338Z,1469120154.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:54.751Z,1469120154.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:55.145Z,1469120155.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:55.539Z,1469120155.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:55.774Z,1469120155.774 [CommandLine](IMPORTANT): got command failComponent none BPC1
2016-07-21T16:55:55.774Z,1469120155.774 [BPC1] No Fault, FailCount= 11
2016-07-21T16:55:55.775Z,1469120155.775 [CommandLine](IMPORTANT): BPC1 failureMode is No Fault
2016-07-21T16:55:56.023Z,1469120156.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:56.378Z,1469120156.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:56.789Z,1469120156.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:57.151Z,1469120157.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:57.534Z,1469120157.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:57.936Z,1469120157.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:58.331Z,1469120158.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:58.747Z,1469120158.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:59.144Z,1469120159.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:59.547Z,1469120159.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:55:59.941Z,1469120159.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:00.353Z,1469120160.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:00.754Z,1469120160.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:01.159Z,1469120161.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:01.525Z,1469120161.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:01.927Z,1469120161.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:02.338Z,1469120162.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:02.781Z,1469120162.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:03.143Z,1469120163.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:03.539Z,1469120163.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:03.955Z,1469120163.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:04.344Z,1469120164.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:04.751Z,1469120164.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:05.144Z,1469120165.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:05.551Z,1469120165.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:05.655Z,1469120165.655 [NavChartDb](INFO): # of records loaded: 45000
2016-07-21T16:56:05.940Z,1469120165.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:06.366Z,1469120166.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:06.761Z,1469120166.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:07.147Z,1469120167.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:07.543Z,1469120167.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:07.944Z,1469120167.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:08.351Z,1469120168.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:08.750Z,1469120168.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:09.086Z,1469120169.086 [CommandLine](IMPORTANT): got command failComponent
2016-07-21T16:56:09.086Z,1469120169.086 [CommandLine](IMPORTANT): Failed components:
2016-07-21T16:56:09.086Z,1469120169.086 [CommandLine](IMPORTANT): DropWeight: Hardware Fault
2016-07-21T16:56:09.086Z,1469120169.086 [CommandLine](IMPORTANT): Rowe_600LCM: Hardware Fault
2016-07-21T16:56:09.195Z,1469120169.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:09.563Z,1469120169.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:09.939Z,1469120169.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:10.364Z,1469120170.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:10.770Z,1469120170.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:11.143Z,1469120171.143 [BPC1](FAULT): Failed to initialize
2016-07-21T16:56:11.143Z,1469120171.143 [BPC1] Communications Fault, FailCount= 12
2016-07-21T16:56:11.143Z,1469120171.143 [BPC1](ERROR): Communications Fault
2016-07-21T16:56:11.186Z,1469120171.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:11.250Z,1469120171.250 [CBIT](ERROR): Communications Fault in component: BPC1
2016-07-21T16:56:11.250Z,1469120171.250 [CBIT](CRITICAL): Communications Fault in component: BPC1
2016-07-21T16:56:11.544Z,1469120171.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:11.945Z,1469120171.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:12.334Z,1469120172.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:12.760Z,1469120172.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:13.144Z,1469120173.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:13.541Z,1469120173.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:13.975Z,1469120173.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:14.347Z,1469120174.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:14.744Z,1469120174.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:15.136Z,1469120175.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:15.536Z,1469120175.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:15.819Z,1469120175.819 [NavChartDb](INFO): # of records loaded: 50000
2016-07-21T16:56:15.934Z,1469120175.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:16.355Z,1469120176.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:16.755Z,1469120176.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:17.162Z,1469120177.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:17.528Z,1469120177.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:17.940Z,1469120177.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:18.361Z,1469120178.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:18.732Z,1469120178.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:19.159Z,1469120179.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:19.559Z,1469120179.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:19.966Z,1469120179.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:20.334Z,1469120180.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:20.743Z,1469120180.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:21.138Z,1469120181.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:21.542Z,1469120181.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:21.942Z,1469120181.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:22.347Z,1469120182.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:22.750Z,1469120182.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:23.170Z,1469120183.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:23.543Z,1469120183.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:23.942Z,1469120183.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:24.343Z,1469120184.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:24.653Z,1469120184.653 [NavChartDb](INFO): # of records loaded: 55000
2016-07-21T16:56:24.735Z,1469120184.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:25.142Z,1469120185.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:25.554Z,1469120185.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:25.955Z,1469120185.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:26.366Z,1469120186.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:26.734Z,1469120186.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:27.147Z,1469120187.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:27.555Z,1469120187.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:27.943Z,1469120187.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:28.348Z,1469120188.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:28.750Z,1469120188.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:29.150Z,1469120189.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:29.555Z,1469120189.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:29.970Z,1469120189.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:30.322Z,1469120190.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:35.284Z,1469120195.284 [NavChartDb](INFO): # of records loaded: 60000
2016-07-21T16:56:36.552Z,1469120196.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:36.610Z,1469120196.610 [CommandLine](IMPORTANT): got command show variable bpc1.uart
2016-07-21T16:56:36.748Z,1469120196.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:37.104Z,1469120197.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:37.495Z,1469120197.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:37.896Z,1469120197.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:38.286Z,1469120198.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:38.701Z,1469120198.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:39.094Z,1469120199.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:39.510Z,1469120199.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:39.899Z,1469120199.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:40.300Z,1469120200.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:40.702Z,1469120200.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:40.782Z,1469120200.782 [CommandLine](IMPORTANT): got command show variable bpc1
2016-07-21T16:56:40.798Z,1469120200.798 [CommandLine](IMPORTANT): BPC1.loadAtStartup (bool)
2016-07-21T16:56:40.798Z,1469120200.798 [CommandLine](IMPORTANT): BPC1.simulateHardware (bool)
2016-07-21T16:56:40.809Z,1469120200.809 [CommandLine](IMPORTANT): BPC1A.uart (none)
2016-07-21T16:56:40.810Z,1469120200.810 [CommandLine](IMPORTANT): BPC1A.baud (bit_per_second)
2016-07-21T16:56:40.810Z,1469120200.810 [CommandLine](IMPORTANT): BPC1B.uart (none)
2016-07-21T16:56:40.810Z,1469120200.810 [CommandLine](IMPORTANT): BPC1B.baud (bit_per_second)
2016-07-21T16:56:40.881Z,1469120200.881 [CommandLine](IMPORTANT): BPC1.BattTemp_0 (celsius)
2016-07-21T16:56:40.881Z,1469120200.881 [CommandLine](IMPORTANT): BPC1.BattVoltage_0 (volt)
2016-07-21T16:56:40.881Z,1469120200.881 [CommandLine](IMPORTANT): BPC1.BattCurrent_0 (ampere)
2016-07-21T16:56:40.882Z,1469120200.882 [CommandLine](IMPORTANT): BPC1.BattCapacity_0 (ampere_hour)
2016-07-21T16:56:40.882Z,1469120200.882 [CommandLine](IMPORTANT): BPC1.BattStatus_0 (enum)
2016-07-21T16:56:40.882Z,1469120200.882 [CommandLine](IMPORTANT): BPC1.BattSerial_0 (count)
2016-07-21T16:56:40.883Z,1469120200.883 [CommandLine](IMPORTANT): BPC1.BattTemp_1 (celsius)
2016-07-21T16:56:40.883Z,1469120200.883 [CommandLine](IMPORTANT): BPC1.BattVoltage_1 (volt)
2016-07-21T16:56:40.884Z,1469120200.884 [CommandLine](IMPORTANT): BPC1.BattCurrent_1 (ampere)
2016-07-21T16:56:40.884Z,1469120200.884 [CommandLine](IMPORTANT): BPC1.BattCapacity_1 (ampere_hour)
2016-07-21T16:56:40.884Z,1469120200.884 [CommandLine](IMPORTANT): BPC1.BattStatus_1 (enum)
2016-07-21T16:56:40.905Z,1469120200.905 [CommandLine](IMPORTANT): BPC1.BattSerial_1 (count)
2016-07-21T16:56:40.905Z,1469120200.905 [CommandLine](IMPORTANT): BPC1.BattTemp_2 (celsius)
2016-07-21T16:56:40.906Z,1469120200.906 [CommandLine](IMPORTANT): BPC1.BattVoltage_2 (volt)
2016-07-21T16:56:40.906Z,1469120200.906 [CommandLine](IMPORTANT): BPC1.BattCurrent_2 (ampere)
2016-07-21T16:56:40.906Z,1469120200.906 [CommandLine](IMPORTANT): BPC1.BattCapacity_2 (ampere_hour)
2016-07-21T16:56:40.907Z,1469120200.907 [CommandLine](IMPORTANT): BPC1.BattStatus_2 (enum)
2016-07-21T16:56:40.907Z,1469120200.907 [CommandLine](IMPORTANT): BPC1.BattSerial_2 (count)
2016-07-21T16:56:40.908Z,1469120200.908 [CommandLine](IMPORTANT): BPC1.BattTemp_3 (celsius)
2016-07-21T16:56:40.908Z,1469120200.908 [CommandLine](IMPORTANT): BPC1.BattVoltage_3 (volt)
2016-07-21T16:56:40.908Z,1469120200.908 [CommandLine](IMPORTANT): BPC1.BattCurrent_3 (ampere)
2016-07-21T16:56:40.917Z,1469120200.917 [CommandLine](IMPORTANT): BPC1.BattCapacity_3 (ampere_hour)
2016-07-21T16:56:40.917Z,1469120200.917 [CommandLine](IMPORTANT): BPC1.BattStatus_3 (enum)
2016-07-21T16:56:40.918Z,1469120200.918 [CommandLine](IMPORTANT): BPC1.BattSerial_3 (count)
2016-07-21T16:56:40.918Z,1469120200.918 [CommandLine](IMPORTANT): BPC1.BattTemp_4 (celsius)
2016-07-21T16:56:40.918Z,1469120200.918 [CommandLine](IMPORTANT): BPC1.BattVoltage_4 (volt)
2016-07-21T16:56:40.919Z,1469120200.919 [CommandLine](IMPORTANT): BPC1.BattCurrent_4 (ampere)
2016-07-21T16:56:40.919Z,1469120200.919 [CommandLine](IMPORTANT): BPC1.BattCapacity_4 (ampere_hour)
2016-07-21T16:56:40.919Z,1469120200.919 [CommandLine](IMPORTANT): BPC1.BattStatus_4 (enum)
2016-07-21T16:56:40.920Z,1469120200.920 [CommandLine](IMPORTANT): BPC1.BattSerial_4 (count)
2016-07-21T16:56:40.920Z,1469120200.920 [CommandLine](IMPORTANT): BPC1.BattTemp_5 (celsius)
2016-07-21T16:56:40.920Z,1469120200.921 [CommandLine](IMPORTANT): BPC1.BattVoltage_5 (volt)
2016-07-21T16:56:40.921Z,1469120200.921 [CommandLine](IMPORTANT): BPC1.BattCurrent_5 (ampere)
2016-07-21T16:56:40.921Z,1469120200.921 [CommandLine](IMPORTANT): BPC1.BattCapacity_5 (ampere_hour)
2016-07-21T16:56:40.922Z,1469120200.922 [CommandLine](IMPORTANT): BPC1.BattStatus_5 (enum)
2016-07-21T16:56:40.922Z,1469120200.922 [CommandLine](IMPORTANT): BPC1.BattSerial_5 (count)
2016-07-21T16:56:40.922Z,1469120200.922 [CommandLine](IMPORTANT): BPC1.BattTemp_6 (celsius)
2016-07-21T16:56:40.923Z,1469120200.923 [CommandLine](IMPORTANT): BPC1.BattVoltage_6 (volt)
2016-07-21T16:56:40.923Z,1469120200.923 [CommandLine](IMPORTANT): BPC1.BattCurrent_6 (ampere)
2016-07-21T16:56:40.923Z,1469120200.923 [CommandLine](IMPORTANT): BPC1.BattCapacity_6 (ampere_hour)
2016-07-21T16:56:40.924Z,1469120200.924 [CommandLine](IMPORTANT): BPC1.BattStatus_6 (enum)
2016-07-21T16:56:40.924Z,1469120200.924 [CommandLine](IMPORTANT): BPC1.BattSerial_6 (count)
2016-07-21T16:56:40.924Z,1469120200.924 [CommandLine](IMPORTANT): BPC1.BattTemp_7 (celsius)
2016-07-21T16:56:40.941Z,1469120200.941 [CommandLine](IMPORTANT): BPC1.BattVoltage_7 (volt)
2016-07-21T16:56:40.942Z,1469120200.941 [CommandLine](IMPORTANT): BPC1.BattCurrent_7 (ampere)
2016-07-21T16:56:40.942Z,1469120200.942 [CommandLine](IMPORTANT): BPC1.BattCapacity_7 (ampere_hour)
2016-07-21T16:56:40.942Z,1469120200.942 [CommandLine](IMPORTANT): BPC1.BattStatus_7 (enum)
2016-07-21T16:56:40.943Z,1469120200.943 [CommandLine](IMPORTANT): BPC1.BattSerial_7 (count)
2016-07-21T16:56:40.943Z,1469120200.943 [CommandLine](IMPORTANT): BPC1.BattTemp_8 (celsius)
2016-07-21T16:56:40.965Z,1469120200.965 [CommandLine](IMPORTANT): BPC1.BattVoltage_8 (volt)
2016-07-21T16:56:40.965Z,1469120200.965 [CommandLine](IMPORTANT): BPC1.BattCurrent_8 (ampere)
2016-07-21T16:56:40.966Z,1469120200.966 [CommandLine](IMPORTANT): BPC1.BattCapacity_8 (ampere_hour)
2016-07-21T16:56:40.966Z,1469120200.966 [CommandLine](IMPORTANT): BPC1.BattStatus_8 (enum)
2016-07-21T16:56:40.966Z,1469120200.966 [CommandLine](IMPORTANT): BPC1.BattSerial_8 (count)
2016-07-21T16:56:40.967Z,1469120200.967 [CommandLine](IMPORTANT): BPC1.BattTemp_9 (celsius)
2016-07-21T16:56:40.967Z,1469120200.967 [CommandLine](IMPORTANT): BPC1.BattVoltage_9 (volt)
2016-07-21T16:56:40.967Z,1469120200.967 [CommandLine](IMPORTANT): BPC1.BattCurrent_9 (ampere)
2016-07-21T16:56:40.968Z,1469120200.968 [CommandLine](IMPORTANT): BPC1.BattCapacity_9 (ampere_hour)
2016-07-21T16:56:40.968Z,1469120200.968 [CommandLine](IMPORTANT): BPC1.BattStatus_9 (enum)
2016-07-21T16:56:40.985Z,1469120200.985 [CommandLine](IMPORTANT): BPC1.BattSerial_9 (count)
2016-07-21T16:56:40.985Z,1469120200.985 [CommandLine](IMPORTANT): BPC1.BattTemp_10 (celsius)
2016-07-21T16:56:40.986Z,1469120200.986 [CommandLine](IMPORTANT): BPC1.BattVoltage_10 (volt)
2016-07-21T16:56:40.986Z,1469120200.986 [CommandLine](IMPORTANT): BPC1.BattCurrent_10 (ampere)
2016-07-21T16:56:40.986Z,1469120200.986 [CommandLine](IMPORTANT): BPC1.BattCapacity_10 (ampere_hour)
2016-07-21T16:56:40.987Z,1469120200.987 [CommandLine](IMPORTANT): BPC1.BattStatus_10 (enum)
2016-07-21T16:56:40.987Z,1469120200.987 [CommandLine](IMPORTANT): BPC1.BattSerial_10 (count)
2016-07-21T16:56:40.988Z,1469120200.987 [CommandLine](IMPORTANT): BPC1.BattTemp_11 (celsius)
2016-07-21T16:56:40.988Z,1469120200.988 [CommandLine](IMPORTANT): BPC1.BattVoltage_11 (volt)
2016-07-21T16:56:40.988Z,1469120200.988 [CommandLine](IMPORTANT): BPC1.BattCurrent_11 (ampere)
2016-07-21T16:56:40.989Z,1469120200.989 [CommandLine](IMPORTANT): BPC1.BattCapacity_11 (ampere_hour)
2016-07-21T16:56:40.989Z,1469120200.989 [CommandLine](IMPORTANT): BPC1.BattStatus_11 (enum)
2016-07-21T16:56:40.989Z,1469120200.989 [CommandLine](IMPORTANT): BPC1.BattSerial_11 (count)
2016-07-21T16:56:40.990Z,1469120200.990 [CommandLine](IMPORTANT): BPC1.BattTemp_12 (celsius)
2016-07-21T16:56:40.990Z,1469120200.990 [CommandLine](IMPORTANT): BPC1.BattVoltage_12 (volt)
2016-07-21T16:56:40.990Z,1469120200.990 [CommandLine](IMPORTANT): BPC1.BattCurrent_12 (ampere)
2016-07-21T16:56:40.991Z,1469120200.991 [CommandLine](IMPORTANT): BPC1.BattCapacity_12 (ampere_hour)
2016-07-21T16:56:40.991Z,1469120200.991 [CommandLine](IMPORTANT): BPC1.BattStatus_12 (enum)
2016-07-21T16:56:40.992Z,1469120200.991 [CommandLine](IMPORTANT): BPC1.BattSerial_12 (count)
2016-07-21T16:56:40.992Z,1469120200.992 [CommandLine](IMPORTANT): BPC1.BattTemp_13 (celsius)
2016-07-21T16:56:40.992Z,1469120200.992 [CommandLine](IMPORTANT): BPC1.BattVoltage_13 (volt)
2016-07-21T16:56:41.005Z,1469120201.005 [CommandLine](IMPORTANT): BPC1.BattCurrent_13 (ampere)
2016-07-21T16:56:41.005Z,1469120201.005 [CommandLine](IMPORTANT): BPC1.BattCapacity_13 (ampere_hour)
2016-07-21T16:56:41.006Z,1469120201.006 [CommandLine](IMPORTANT): BPC1.BattStatus_13 (enum)
2016-07-21T16:56:41.006Z,1469120201.006 [CommandLine](IMPORTANT): BPC1.BattSerial_13 (count)
2016-07-21T16:56:41.006Z,1469120201.006 [CommandLine](IMPORTANT): BPC1.BattTemp_14 (celsius)
2016-07-21T16:56:41.007Z,1469120201.007 [CommandLine](IMPORTANT): BPC1.BattVoltage_14 (volt)
2016-07-21T16:56:41.007Z,1469120201.007 [CommandLine](IMPORTANT): BPC1.BattCurrent_14 (ampere)
2016-07-21T16:56:41.007Z,1469120201.007 [CommandLine](IMPORTANT): BPC1.BattCapacity_14 (ampere_hour)
2016-07-21T16:56:41.008Z,1469120201.008 [CommandLine](IMPORTANT): BPC1.BattStatus_14 (enum)
2016-07-21T16:56:41.008Z,1469120201.008 [CommandLine](IMPORTANT): BPC1.BattSerial_14 (count)
2016-07-21T16:56:41.014Z,1469120201.014 [CommandLine](IMPORTANT): BPC1.BattTemp_15 (celsius)
2016-07-21T16:56:41.014Z,1469120201.014 [CommandLine](IMPORTANT): BPC1.BattVoltage_15 (volt)
2016-07-21T16:56:41.015Z,1469120201.015 [CommandLine](IMPORTANT): BPC1.BattCurrent_15 (ampere)
2016-07-21T16:56:41.015Z,1469120201.015 [CommandLine](IMPORTANT): BPC1.BattCapacity_15 (ampere_hour)
2016-07-21T16:56:41.016Z,1469120201.016 [CommandLine](IMPORTANT): BPC1.BattStatus_15 (enum)
2016-07-21T16:56:41.016Z,1469120201.016 [CommandLine](IMPORTANT): BPC1.BattSerial_15 (count)
2016-07-21T16:56:41.016Z,1469120201.016 [CommandLine](IMPORTANT): BPC1.BattTemp_16 (celsius)
2016-07-21T16:56:41.029Z,1469120201.029 [CommandLine](IMPORTANT): BPC1.BattVoltage_16 (volt)
2016-07-21T16:56:41.029Z,1469120201.029 [CommandLine](IMPORTANT): BPC1.BattCurrent_16 (ampere)
2016-07-21T16:56:41.030Z,1469120201.030 [CommandLine](IMPORTANT): BPC1.BattCapacity_16 (ampere_hour)
2016-07-21T16:56:41.030Z,1469120201.030 [CommandLine](IMPORTANT): BPC1.BattStatus_16 (enum)
2016-07-21T16:56:41.030Z,1469120201.030 [CommandLine](IMPORTANT): BPC1.BattSerial_16 (count)
2016-07-21T16:56:41.031Z,1469120201.031 [CommandLine](IMPORTANT): BPC1.BattTemp_17 (celsius)
2016-07-21T16:56:41.031Z,1469120201.031 [CommandLine](IMPORTANT): BPC1.BattVoltage_17 (volt)
2016-07-21T16:56:41.032Z,1469120201.032 [CommandLine](IMPORTANT): BPC1.BattCurrent_17 (ampere)
2016-07-21T16:56:41.032Z,1469120201.032 [CommandLine](IMPORTANT): BPC1.BattCapacity_17 (ampere_hour)
2016-07-21T16:56:41.032Z,1469120201.032 [CommandLine](IMPORTANT): BPC1.BattStatus_17 (enum)
2016-07-21T16:56:41.050Z,1469120201.050 [CommandLine](IMPORTANT): BPC1.BattSerial_17 (count)
2016-07-21T16:56:41.081Z,1469120201.081 [CommandLine](IMPORTANT): BPC1.BattTemp_18 (celsius)
2016-07-21T16:56:41.081Z,1469120201.081 [CommandLine](IMPORTANT): BPC1.BattVoltage_18 (volt)
2016-07-21T16:56:41.082Z,1469120201.082 [CommandLine](IMPORTANT): BPC1.BattCurrent_18 (ampere)
2016-07-21T16:56:41.082Z,1469120201.082 [CommandLine](IMPORTANT): BPC1.BattCapacity_18 (ampere_hour)
2016-07-21T16:56:41.083Z,1469120201.082 [CommandLine](IMPORTANT): BPC1.BattStatus_18 (enum)
2016-07-21T16:56:41.083Z,1469120201.083 [CommandLine](IMPORTANT): BPC1.BattSerial_18 (count)
2016-07-21T16:56:41.083Z,1469120201.083 [CommandLine](IMPORTANT): BPC1.BattTemp_19 (celsius)
2016-07-21T16:56:41.084Z,1469120201.084 [CommandLine](IMPORTANT): BPC1.BattVoltage_19 (volt)
2016-07-21T16:56:41.084Z,1469120201.084 [CommandLine](IMPORTANT): BPC1.BattCurrent_19 (ampere)
2016-07-21T16:56:41.084Z,1469120201.084 [CommandLine](IMPORTANT): BPC1.BattCapacity_19 (ampere_hour)
2016-07-21T16:56:41.097Z,1469120201.097 [CommandLine](IMPORTANT): BPC1.BattStatus_19 (enum)
2016-07-21T16:56:41.097Z,1469120201.097 [CommandLine](IMPORTANT): BPC1.BattSerial_19 (count)
2016-07-21T16:56:41.098Z,1469120201.098 [CommandLine](IMPORTANT): BPC1.BattTemp_20 (celsius)
2016-07-21T16:56:41.098Z,1469120201.098 [CommandLine](IMPORTANT): BPC1.BattVoltage_20 (volt)
2016-07-21T16:56:41.098Z,1469120201.099 [CommandLine](IMPORTANT): BPC1.BattCurrent_20 (ampere)
2016-07-21T16:56:41.099Z,1469120201.099 [CommandLine](IMPORTANT): BPC1.BattCapacity_20 (ampere_hour)
2016-07-21T16:56:41.099Z,1469120201.099 [CommandLine](IMPORTANT): BPC1.BattStatus_20 (enum)
2016-07-21T16:56:41.100Z,1469120201.100 [CommandLine](IMPORTANT): BPC1.BattSerial_20 (count)
2016-07-21T16:56:41.100Z,1469120201.100 [CommandLine](IMPORTANT): BPC1.BattTemp_21 (celsius)
2016-07-21T16:56:41.100Z,1469120201.100 [CommandLine](IMPORTANT): BPC1.BattVoltage_21 (volt)
2016-07-21T16:56:41.107Z,1469120201.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:41.113Z,1469120201.113 [CommandLine](IMPORTANT): BPC1.BattCurrent_21 (ampere)
2016-07-21T16:56:41.113Z,1469120201.113 [CommandLine](IMPORTANT): BPC1.BattCapacity_21 (ampere_hour)
2016-07-21T16:56:41.114Z,1469120201.114 [CommandLine](IMPORTANT): BPC1.BattStatus_21 (enum)
2016-07-21T16:56:41.114Z,1469120201.114 [CommandLine](IMPORTANT): BPC1.BattSerial_21 (count)
2016-07-21T16:56:41.114Z,1469120201.114 [CommandLine](IMPORTANT): BPC1.BattTemp_22 (celsius)
2016-07-21T16:56:41.115Z,1469120201.115 [CommandLine](IMPORTANT): BPC1.BattVoltage_22 (volt)
2016-07-21T16:56:41.115Z,1469120201.115 [CommandLine](IMPORTANT): BPC1.BattCurrent_22 (ampere)
2016-07-21T16:56:41.116Z,1469120201.115 [CommandLine](IMPORTANT): BPC1.BattCapacity_22 (ampere_hour)
2016-07-21T16:56:41.116Z,1469120201.116 [CommandLine](IMPORTANT): BPC1.BattStatus_22 (enum)
2016-07-21T16:56:41.116Z,1469120201.116 [CommandLine](IMPORTANT): BPC1.BattSerial_22 (count)
2016-07-21T16:56:41.129Z,1469120201.129 [CommandLine](IMPORTANT): BPC1.BattTemp_23 (celsius)
2016-07-21T16:56:41.129Z,1469120201.129 [CommandLine](IMPORTANT): BPC1.BattVoltage_23 (volt)
2016-07-21T16:56:41.130Z,1469120201.130 [CommandLine](IMPORTANT): BPC1.BattCurrent_23 (ampere)
2016-07-21T16:56:41.130Z,1469120201.130 [CommandLine](IMPORTANT): BPC1.BattCapacity_23 (ampere_hour)
2016-07-21T16:56:41.131Z,1469120201.131 [CommandLine](IMPORTANT): BPC1.BattStatus_23 (enum)
2016-07-21T16:56:41.131Z,1469120201.131 [CommandLine](IMPORTANT): BPC1.BattSerial_23 (count)
2016-07-21T16:56:41.131Z,1469120201.131 [CommandLine](IMPORTANT): BPC1.BattTemp_24 (celsius)
2016-07-21T16:56:41.132Z,1469120201.132 [CommandLine](IMPORTANT): BPC1.BattVoltage_24 (volt)
2016-07-21T16:56:41.132Z,1469120201.132 [CommandLine](IMPORTANT): BPC1.BattCurrent_24 (ampere)
2016-07-21T16:56:41.132Z,1469120201.132 [CommandLine](IMPORTANT): BPC1.BattCapacity_24 (ampere_hour)
2016-07-21T16:56:41.145Z,1469120201.145 [CommandLine](IMPORTANT): BPC1.BattStatus_24 (enum)
2016-07-21T16:56:41.146Z,1469120201.146 [CommandLine](IMPORTANT): BPC1.BattSerial_24 (count)
2016-07-21T16:56:41.146Z,1469120201.146 [CommandLine](IMPORTANT): BPC1.BattTemp_25 (celsius)
2016-07-21T16:56:41.147Z,1469120201.147 [CommandLine](IMPORTANT): BPC1.BattVoltage_25 (volt)
2016-07-21T16:56:41.147Z,1469120201.147 [CommandLine](IMPORTANT): BPC1.BattCurrent_25 (ampere)
2016-07-21T16:56:41.147Z,1469120201.147 [CommandLine](IMPORTANT): BPC1.BattCapacity_25 (ampere_hour)
2016-07-21T16:56:41.148Z,1469120201.148 [CommandLine](IMPORTANT): BPC1.BattStatus_25 (enum)
2016-07-21T16:56:41.148Z,1469120201.148 [CommandLine](IMPORTANT): BPC1.BattSerial_25 (count)
2016-07-21T16:56:41.148Z,1469120201.148 [CommandLine](IMPORTANT): BPC1.BattTemp_26 (celsius)
2016-07-21T16:56:41.170Z,1469120201.170 [CommandLine](IMPORTANT): BPC1.BattVoltage_26 (volt)
2016-07-21T16:56:41.170Z,1469120201.170 [CommandLine](IMPORTANT): BPC1.BattCurrent_26 (ampere)
2016-07-21T16:56:41.171Z,1469120201.171 [CommandLine](IMPORTANT): BPC1.BattCapacity_26 (ampere_hour)
2016-07-21T16:56:41.171Z,1469120201.171 [CommandLine](IMPORTANT): BPC1.BattStatus_26 (enum)
2016-07-21T16:56:41.171Z,1469120201.171 [CommandLine](IMPORTANT): BPC1.BattSerial_26 (count)
2016-07-21T16:56:41.172Z,1469120201.172 [CommandLine](IMPORTANT): BPC1.BattTemp_27 (celsius)
2016-07-21T16:56:41.172Z,1469120201.172 [CommandLine](IMPORTANT): BPC1.BattVoltage_27 (volt)
2016-07-21T16:56:41.172Z,1469120201.172 [CommandLine](IMPORTANT): BPC1.BattCurrent_27 (ampere)
2016-07-21T16:56:41.173Z,1469120201.173 [CommandLine](IMPORTANT): BPC1.BattCapacity_27 (ampere_hour)
2016-07-21T16:56:41.174Z,1469120201.174 [CommandLine](IMPORTANT): BPC1.BattStatus_27 (enum)
2016-07-21T16:56:41.174Z,1469120201.174 [CommandLine](IMPORTANT): BPC1.BattSerial_27 (count)
2016-07-21T16:56:41.174Z,1469120201.174 [CommandLine](IMPORTANT): BPC1.BattTemp_28 (celsius)
2016-07-21T16:56:41.175Z,1469120201.174 [CommandLine](IMPORTANT): BPC1.BattVoltage_28 (volt)
2016-07-21T16:56:41.175Z,1469120201.175 [CommandLine](IMPORTANT): BPC1.BattCurrent_28 (ampere)
2016-07-21T16:56:41.175Z,1469120201.175 [CommandLine](IMPORTANT): BPC1.BattCapacity_28 (ampere_hour)
2016-07-21T16:56:41.176Z,1469120201.176 [CommandLine](IMPORTANT): BPC1.BattStatus_28 (enum)
2016-07-21T16:56:41.176Z,1469120201.176 [CommandLine](IMPORTANT): BPC1.BattSerial_28 (count)
2016-07-21T16:56:41.176Z,1469120201.176 [CommandLine](IMPORTANT): BPC1.BattTemp_29 (celsius)
2016-07-21T16:56:41.185Z,1469120201.185 [CommandLine](IMPORTANT): BPC1.BattVoltage_29 (volt)
2016-07-21T16:56:41.185Z,1469120201.185 [CommandLine](IMPORTANT): BPC1.BattCurrent_29 (ampere)
2016-07-21T16:56:41.186Z,1469120201.186 [CommandLine](IMPORTANT): BPC1.BattCapacity_29 (ampere_hour)
2016-07-21T16:56:41.186Z,1469120201.186 [CommandLine](IMPORTANT): BPC1.BattStatus_29 (enum)
2016-07-21T16:56:41.187Z,1469120201.187 [CommandLine](IMPORTANT): BPC1.BattSerial_29 (count)
2016-07-21T16:56:41.187Z,1469120201.187 [CommandLine](IMPORTANT): BPC1.BattTemp_30 (celsius)
2016-07-21T16:56:41.187Z,1469120201.187 [CommandLine](IMPORTANT): BPC1.BattVoltage_30 (volt)
2016-07-21T16:56:41.188Z,1469120201.188 [CommandLine](IMPORTANT): BPC1.BattCurrent_30 (ampere)
2016-07-21T16:56:41.188Z,1469120201.188 [CommandLine](IMPORTANT): BPC1.BattCapacity_30 (ampere_hour)
2016-07-21T16:56:41.188Z,1469120201.188 [CommandLine](IMPORTANT): BPC1.BattStatus_30 (enum)
2016-07-21T16:56:41.197Z,1469120201.197 [CommandLine](IMPORTANT): BPC1.BattSerial_30 (count)
2016-07-21T16:56:41.197Z,1469120201.197 [CommandLine](IMPORTANT): BPC1.BattTemp_31 (celsius)
2016-07-21T16:56:41.198Z,1469120201.198 [CommandLine](IMPORTANT): BPC1.BattVoltage_31 (volt)
2016-07-21T16:56:41.198Z,1469120201.198 [CommandLine](IMPORTANT): BPC1.BattCurrent_31 (ampere)
2016-07-21T16:56:41.199Z,1469120201.199 [CommandLine](IMPORTANT): BPC1.BattCapacity_31 (ampere_hour)
2016-07-21T16:56:41.199Z,1469120201.199 [CommandLine](IMPORTANT): BPC1.BattStatus_31 (enum)
2016-07-21T16:56:41.199Z,1469120201.199 [CommandLine](IMPORTANT): BPC1.BattSerial_31 (count)
2016-07-21T16:56:41.200Z,1469120201.200 [CommandLine](IMPORTANT): BPC1.BattTemp_32 (celsius)
2016-07-21T16:56:41.200Z,1469120201.200 [CommandLine](IMPORTANT): BPC1.BattVoltage_32 (volt)
2016-07-21T16:56:41.200Z,1469120201.200 [CommandLine](IMPORTANT): BPC1.BattCurrent_32 (ampere)
2016-07-21T16:56:41.206Z,1469120201.206 [CommandLine](IMPORTANT): BPC1.BattCapacity_32 (ampere_hour)
2016-07-21T16:56:41.206Z,1469120201.206 [CommandLine](IMPORTANT): BPC1.BattStatus_32 (enum)
2016-07-21T16:56:41.207Z,1469120201.207 [CommandLine](IMPORTANT): BPC1.BattSerial_32 (count)
2016-07-21T16:56:41.207Z,1469120201.207 [CommandLine](IMPORTANT): BPC1.BattTemp_33 (celsius)
2016-07-21T16:56:41.207Z,1469120201.207 [CommandLine](IMPORTANT): BPC1.BattVoltage_33 (volt)
2016-07-21T16:56:41.208Z,1469120201.208 [CommandLine](IMPORTANT): BPC1.BattCurrent_33 (ampere)
2016-07-21T16:56:41.208Z,1469120201.208 [CommandLine](IMPORTANT): BPC1.BattCapacity_33 (ampere_hour)
2016-07-21T16:56:41.208Z,1469120201.208 [CommandLine](IMPORTANT): BPC1.BattStatus_33 (enum)
2016-07-21T16:56:41.233Z,1469120201.233 [CommandLine](IMPORTANT): BPC1.BattSerial_33 (count)
2016-07-21T16:56:41.234Z,1469120201.234 [CommandLine](IMPORTANT): BPC1.BattTemp_34 (celsius)
2016-07-21T16:56:41.234Z,1469120201.234 [CommandLine](IMPORTANT): BPC1.BattVoltage_34 (volt)
2016-07-21T16:56:41.234Z,1469120201.234 [CommandLine](IMPORTANT): BPC1.BattCurrent_34 (ampere)
2016-07-21T16:56:41.235Z,1469120201.235 [CommandLine](IMPORTANT): BPC1.BattCapacity_34 (ampere_hour)
2016-07-21T16:56:41.235Z,1469120201.235 [CommandLine](IMPORTANT): BPC1.BattStatus_34 (enum)
2016-07-21T16:56:41.235Z,1469120201.235 [CommandLine](IMPORTANT): BPC1.BattSerial_34 (count)
2016-07-21T16:56:41.236Z,1469120201.236 [CommandLine](IMPORTANT): BPC1.BattTemp_35 (celsius)
2016-07-21T16:56:41.236Z,1469120201.236 [CommandLine](IMPORTANT): BPC1.BattVoltage_35 (volt)
2016-07-21T16:56:41.236Z,1469120201.236 [CommandLine](IMPORTANT): BPC1.BattCurrent_35 (ampere)
2016-07-21T16:56:41.249Z,1469120201.249 [CommandLine](IMPORTANT): BPC1.BattCapacity_35 (ampere_hour)
2016-07-21T16:56:41.250Z,1469120201.250 [CommandLine](IMPORTANT): BPC1.BattStatus_35 (enum)
2016-07-21T16:56:41.250Z,1469120201.250 [CommandLine](IMPORTANT): BPC1.BattSerial_35 (count)
2016-07-21T16:56:41.250Z,1469120201.250 [CommandLine](IMPORTANT): BPC1.BattTemp_36 (celsius)
2016-07-21T16:56:41.251Z,1469120201.251 [CommandLine](IMPORTANT): BPC1.BattVoltage_36 (volt)
2016-07-21T16:56:41.251Z,1469120201.251 [CommandLine](IMPORTANT): BPC1.BattCurrent_36 (ampere)
2016-07-21T16:56:41.251Z,1469120201.251 [CommandLine](IMPORTANT): BPC1.BattCapacity_36 (ampere_hour)
2016-07-21T16:56:41.252Z,1469120201.252 [CommandLine](IMPORTANT): BPC1.BattStatus_36 (enum)
2016-07-21T16:56:41.252Z,1469120201.252 [CommandLine](IMPORTANT): BPC1.BattSerial_36 (count)
2016-07-21T16:56:41.252Z,1469120201.252 [CommandLine](IMPORTANT): BPC1.BattTemp_37 (celsius)
2016-07-21T16:56:41.265Z,1469120201.265 [CommandLine](IMPORTANT): BPC1.BattVoltage_37 (volt)
2016-07-21T16:56:41.265Z,1469120201.265 [CommandLine](IMPORTANT): BPC1.BattCurrent_37 (ampere)
2016-07-21T16:56:41.266Z,1469120201.266 [CommandLine](IMPORTANT): BPC1.BattCapacity_37 (ampere_hour)
2016-07-21T16:56:41.266Z,1469120201.266 [CommandLine](IMPORTANT): BPC1.BattStatus_37 (enum)
2016-07-21T16:56:41.266Z,1469120201.266 [CommandLine](IMPORTANT): BPC1.BattSerial_37 (count)
2016-07-21T16:56:41.267Z,1469120201.267 [CommandLine](IMPORTANT): BPC1.BattTemp_38 (celsius)
2016-07-21T16:56:41.267Z,1469120201.267 [CommandLine](IMPORTANT): BPC1.BattVoltage_38 (volt)
2016-07-21T16:56:41.268Z,1469120201.268 [CommandLine](IMPORTANT): BPC1.BattCurrent_38 (ampere)
2016-07-21T16:56:41.268Z,1469120201.268 [CommandLine](IMPORTANT): BPC1.BattCapacity_38 (ampere_hour)
2016-07-21T16:56:41.268Z,1469120201.268 [CommandLine](IMPORTANT): BPC1.BattStatus_38 (enum)
2016-07-21T16:56:41.281Z,1469120201.281 [CommandLine](IMPORTANT): BPC1.BattSerial_38 (count)
2016-07-21T16:56:41.281Z,1469120201.281 [CommandLine](IMPORTANT): BPC1.BattTemp_39 (celsius)
2016-07-21T16:56:41.282Z,1469120201.282 [CommandLine](IMPORTANT): BPC1.BattVoltage_39 (volt)
2016-07-21T16:56:41.282Z,1469120201.282 [CommandLine](IMPORTANT): BPC1.BattCurrent_39 (ampere)
2016-07-21T16:56:41.282Z,1469120201.282 [CommandLine](IMPORTANT): BPC1.BattCapacity_39 (ampere_hour)
2016-07-21T16:56:41.283Z,1469120201.283 [CommandLine](IMPORTANT): BPC1.BattStatus_39 (enum)
2016-07-21T16:56:41.283Z,1469120201.283 [CommandLine](IMPORTANT): BPC1.BattSerial_39 (count)
2016-07-21T16:56:41.283Z,1469120201.283 [CommandLine](IMPORTANT): BPC1.BattTemp_40 (celsius)
2016-07-21T16:56:41.284Z,1469120201.284 [CommandLine](IMPORTANT): BPC1.BattVoltage_40 (volt)
2016-07-21T16:56:41.284Z,1469120201.284 [CommandLine](IMPORTANT): BPC1.BattCurrent_40 (ampere)
2016-07-21T16:56:41.285Z,1469120201.284 [CommandLine](IMPORTANT): BPC1.BattCapacity_40 (ampere_hour)
2016-07-21T16:56:41.297Z,1469120201.297 [CommandLine](IMPORTANT): BPC1.BattStatus_40 (enum)
2016-07-21T16:56:41.298Z,1469120201.297 [CommandLine](IMPORTANT): BPC1.BattSerial_40 (count)
2016-07-21T16:56:41.298Z,1469120201.298 [CommandLine](IMPORTANT): BPC1.BattTemp_41 (celsius)
2016-07-21T16:56:41.298Z,1469120201.298 [CommandLine](IMPORTANT): BPC1.BattVoltage_41 (volt)
2016-07-21T16:56:41.299Z,1469120201.299 [CommandLine](IMPORTANT): BPC1.BattCurrent_41 (ampere)
2016-07-21T16:56:41.299Z,1469120201.299 [CommandLine](IMPORTANT): BPC1.BattCapacity_41 (ampere_hour)
2016-07-21T16:56:41.299Z,1469120201.299 [CommandLine](IMPORTANT): BPC1.BattStatus_41 (enum)
2016-07-21T16:56:41.300Z,1469120201.300 [CommandLine](IMPORTANT): BPC1.BattSerial_41 (count)
2016-07-21T16:56:41.300Z,1469120201.300 [CommandLine](IMPORTANT): BPC1.BattTemp_42 (celsius)
2016-07-21T16:56:41.300Z,1469120201.300 [CommandLine](IMPORTANT): BPC1.BattVoltage_42 (volt)
2016-07-21T16:56:41.313Z,1469120201.313 [CommandLine](IMPORTANT): BPC1.BattCurrent_42 (ampere)
2016-07-21T16:56:41.325Z,1469120201.325 [CommandLine](IMPORTANT): BPC1.BattCapacity_42 (ampere_hour)
2016-07-21T16:56:41.326Z,1469120201.326 [CommandLine](IMPORTANT): BPC1.BattStatus_42 (enum)
2016-07-21T16:56:41.326Z,1469120201.326 [CommandLine](IMPORTANT): BPC1.BattSerial_42 (count)
2016-07-21T16:56:41.326Z,1469120201.326 [CommandLine](IMPORTANT): BPC1.BattTemp_43 (celsius)
2016-07-21T16:56:41.327Z,1469120201.327 [CommandLine](IMPORTANT): BPC1.BattVoltage_43 (volt)
2016-07-21T16:56:41.327Z,1469120201.327 [CommandLine](IMPORTANT): BPC1.BattCurrent_43 (ampere)
2016-07-21T16:56:41.327Z,1469120201.327 [CommandLine](IMPORTANT): BPC1.BattCapacity_43 (ampere_hour)
2016-07-21T16:56:41.328Z,1469120201.328 [CommandLine](IMPORTANT): BPC1.BattStatus_43 (enum)
2016-07-21T16:56:41.328Z,1469120201.328 [CommandLine](IMPORTANT): BPC1.BattSerial_43 (count)
2016-07-21T16:56:41.328Z,1469120201.328 [CommandLine](IMPORTANT): BPC1.BattTemp_44 (celsius)
2016-07-21T16:56:41.333Z,1469120201.333 [CommandLine](IMPORTANT): BPC1.BattVoltage_44 (volt)
2016-07-21T16:56:41.334Z,1469120201.334 [CommandLine](IMPORTANT): BPC1.BattCurrent_44 (ampere)
2016-07-21T16:56:41.334Z,1469120201.334 [CommandLine](IMPORTANT): BPC1.BattCapacity_44 (ampere_hour)
2016-07-21T16:56:41.335Z,1469120201.335 [CommandLine](IMPORTANT): BPC1.BattStatus_44 (enum)
2016-07-21T16:56:41.335Z,1469120201.335 [CommandLine](IMPORTANT): BPC1.BattSerial_44 (count)
2016-07-21T16:56:41.335Z,1469120201.335 [CommandLine](IMPORTANT): BPC1.BattTemp_45 (celsius)
2016-07-21T16:56:41.336Z,1469120201.336 [CommandLine](IMPORTANT): BPC1.BattVoltage_45 (volt)
2016-07-21T16:56:41.336Z,1469120201.336 [CommandLine](IMPORTANT): BPC1.BattCurrent_45 (ampere)
2016-07-21T16:56:41.336Z,1469120201.336 [CommandLine](IMPORTANT): BPC1.BattCapacity_45 (ampere_hour)
2016-07-21T16:56:41.350Z,1469120201.350 [CommandLine](IMPORTANT): BPC1.BattStatus_45 (enum)
2016-07-21T16:56:41.350Z,1469120201.350 [CommandLine](IMPORTANT): BPC1.BattSerial_45 (count)
2016-07-21T16:56:41.350Z,1469120201.350 [CommandLine](IMPORTANT): BPC1.BattTemp_46 (celsius)
2016-07-21T16:56:41.351Z,1469120201.351 [CommandLine](IMPORTANT): BPC1.BattVoltage_46 (volt)
2016-07-21T16:56:41.351Z,1469120201.351 [CommandLine](IMPORTANT): BPC1.BattCurrent_46 (ampere)
2016-07-21T16:56:41.352Z,1469120201.352 [CommandLine](IMPORTANT): BPC1.BattCapacity_46 (ampere_hour)
2016-07-21T16:56:41.352Z,1469120201.352 [CommandLine](IMPORTANT): BPC1.BattStatus_46 (enum)
2016-07-21T16:56:41.352Z,1469120201.352 [CommandLine](IMPORTANT): BPC1.BattSerial_46 (count)
2016-07-21T16:56:41.361Z,1469120201.361 [CommandLine](IMPORTANT): BPC1.BattTemp_47 (celsius)
2016-07-21T16:56:41.361Z,1469120201.361 [CommandLine](IMPORTANT): BPC1.BattVoltage_47 (volt)
2016-07-21T16:56:41.362Z,1469120201.362 [CommandLine](IMPORTANT): BPC1.BattCurrent_47 (ampere)
2016-07-21T16:56:41.362Z,1469120201.362 [CommandLine](IMPORTANT): BPC1.BattCapacity_47 (ampere_hour)
2016-07-21T16:56:41.362Z,1469120201.362 [CommandLine](IMPORTANT): BPC1.BattStatus_47 (enum)
2016-07-21T16:56:41.363Z,1469120201.363 [CommandLine](IMPORTANT): BPC1.BattSerial_47 (count)
2016-07-21T16:56:41.363Z,1469120201.363 [CommandLine](IMPORTANT): BPC1.BattTemp_48 (celsius)
2016-07-21T16:56:41.363Z,1469120201.364 [CommandLine](IMPORTANT): BPC1.BattVoltage_48 (volt)
2016-07-21T16:56:41.364Z,1469120201.364 [CommandLine](IMPORTANT): BPC1.BattCurrent_48 (ampere)
2016-07-21T16:56:41.364Z,1469120201.364 [CommandLine](IMPORTANT): BPC1.BattCapacity_48 (ampere_hour)
2016-07-21T16:56:41.369Z,1469120201.369 [CommandLine](IMPORTANT): BPC1.BattStatus_48 (enum)
2016-07-21T16:56:41.369Z,1469120201.369 [CommandLine](IMPORTANT): BPC1.BattSerial_48 (count)
2016-07-21T16:56:41.370Z,1469120201.370 [CommandLine](IMPORTANT): BPC1.BattTemp_49 (celsius)
2016-07-21T16:56:41.370Z,1469120201.370 [CommandLine](IMPORTANT): BPC1.BattVoltage_49 (volt)
2016-07-21T16:56:41.370Z,1469120201.370 [CommandLine](IMPORTANT): BPC1.BattCurrent_49 (ampere)
2016-07-21T16:56:41.373Z,1469120201.373 [CommandLine](IMPORTANT): BPC1.BattCapacity_49 (ampere_hour)
2016-07-21T16:56:41.374Z,1469120201.374 [CommandLine](IMPORTANT): BPC1.BattStatus_49 (enum)
2016-07-21T16:56:41.374Z,1469120201.374 [CommandLine](IMPORTANT): BPC1.BattSerial_49 (count)
2016-07-21T16:56:41.374Z,1469120201.374 [CommandLine](IMPORTANT): BPC1.BattTemp_50 (celsius)
2016-07-21T16:56:41.375Z,1469120201.375 [CommandLine](IMPORTANT): BPC1.BattVoltage_50 (volt)
2016-07-21T16:56:41.375Z,1469120201.375 [CommandLine](IMPORTANT): BPC1.BattCurrent_50 (ampere)
2016-07-21T16:56:41.375Z,1469120201.375 [CommandLine](IMPORTANT): BPC1.BattCapacity_50 (ampere_hour)
2016-07-21T16:56:41.376Z,1469120201.376 [CommandLine](IMPORTANT): BPC1.BattStatus_50 (enum)
2016-07-21T16:56:41.376Z,1469120201.376 [CommandLine](IMPORTANT): BPC1.BattSerial_50 (count)
2016-07-21T16:56:41.377Z,1469120201.376 [CommandLine](IMPORTANT): BPC1.BattTemp_51 (celsius)
2016-07-21T16:56:41.385Z,1469120201.385 [CommandLine](IMPORTANT): BPC1.BattVoltage_51 (volt)
2016-07-21T16:56:41.386Z,1469120201.386 [CommandLine](IMPORTANT): BPC1.BattCurrent_51 (ampere)
2016-07-21T16:56:41.386Z,1469120201.386 [CommandLine](IMPORTANT): BPC1.BattCapacity_51 (ampere_hour)
2016-07-21T16:56:41.386Z,1469120201.386 [CommandLine](IMPORTANT): BPC1.BattStatus_51 (enum)
2016-07-21T16:56:41.387Z,1469120201.387 [CommandLine](IMPORTANT): BPC1.BattSerial_51 (count)
2016-07-21T16:56:41.387Z,1469120201.387 [CommandLine](IMPORTANT): BPC1.BattTemp_52 (celsius)
2016-07-21T16:56:41.387Z,1469120201.387 [CommandLine](IMPORTANT): BPC1.BattVoltage_52 (volt)
2016-07-21T16:56:41.388Z,1469120201.388 [CommandLine](IMPORTANT): BPC1.BattCurrent_52 (ampere)
2016-07-21T16:56:41.388Z,1469120201.388 [CommandLine](IMPORTANT): BPC1.BattCapacity_52 (ampere_hour)
2016-07-21T16:56:41.389Z,1469120201.388 [CommandLine](IMPORTANT): BPC1.BattStatus_52 (enum)
2016-07-21T16:56:41.395Z,1469120201.395 [CommandLine](IMPORTANT): BPC1.BattSerial_52 (count)
2016-07-21T16:56:41.395Z,1469120201.395 [CommandLine](IMPORTANT): BPC1.BattTemp_53 (celsius)
2016-07-21T16:56:41.396Z,1469120201.395 [CommandLine](IMPORTANT): BPC1.BattVoltage_53 (volt)
2016-07-21T16:56:41.396Z,1469120201.396 [CommandLine](IMPORTANT): BPC1.BattCurrent_53 (ampere)
2016-07-21T16:56:41.396Z,1469120201.396 [CommandLine](IMPORTANT): BPC1.BattCapacity_53 (ampere_hour)
2016-07-21T16:56:41.409Z,1469120201.409 [CommandLine](IMPORTANT): BPC1.BattStatus_53 (enum)
2016-07-21T16:56:41.409Z,1469120201.409 [CommandLine](IMPORTANT): BPC1.BattSerial_53 (count)
2016-07-21T16:56:41.410Z,1469120201.410 [CommandLine](IMPORTANT): BPC1.BattTemp_54 (celsius)
2016-07-21T16:56:41.410Z,1469120201.410 [CommandLine](IMPORTANT): BPC1.BattVoltage_54 (volt)
2016-07-21T16:56:41.410Z,1469120201.410 [CommandLine](IMPORTANT): BPC1.BattCurrent_54 (ampere)
2016-07-21T16:56:41.411Z,1469120201.411 [CommandLine](IMPORTANT): BPC1.BattCapacity_54 (ampere_hour)
2016-07-21T16:56:41.411Z,1469120201.411 [CommandLine](IMPORTANT): BPC1.BattStatus_54 (enum)
2016-07-21T16:56:41.412Z,1469120201.411 [CommandLine](IMPORTANT): BPC1.BattSerial_54 (count)
2016-07-21T16:56:41.412Z,1469120201.412 [CommandLine](IMPORTANT): BPC1.BattTemp_55 (celsius)
2016-07-21T16:56:41.412Z,1469120201.412 [CommandLine](IMPORTANT): BPC1.BattVoltage_55 (volt)
2016-07-21T16:56:41.412Z,1469120201.412 [CommandLine](IMPORTANT): BPC1.BattCurrent_55 (ampere)
2016-07-21T16:56:41.421Z,1469120201.421 [CommandLine](IMPORTANT): BPC1.BattCapacity_55 (ampere_hour)
2016-07-21T16:56:41.422Z,1469120201.422 [CommandLine](IMPORTANT): BPC1.BattStatus_55 (enum)
2016-07-21T16:56:41.422Z,1469120201.422 [CommandLine](IMPORTANT): BPC1.BattSerial_55 (count)
2016-07-21T16:56:41.422Z,1469120201.422 [CommandLine](IMPORTANT): BPC1.BattTemp_56 (celsius)
2016-07-21T16:56:41.423Z,1469120201.423 [CommandLine](IMPORTANT): BPC1.BattVoltage_56 (volt)
2016-07-21T16:56:41.423Z,1469120201.423 [CommandLine](IMPORTANT): BPC1.BattCurrent_56 (ampere)
2016-07-21T16:56:41.423Z,1469120201.423 [CommandLine](IMPORTANT): BPC1.BattCapacity_56 (ampere_hour)
2016-07-21T16:56:41.424Z,1469120201.424 [CommandLine](IMPORTANT): BPC1.BattStatus_56 (enum)
2016-07-21T16:56:41.424Z,1469120201.424 [CommandLine](IMPORTANT): BPC1.BattSerial_56 (count)
2016-07-21T16:56:41.424Z,1469120201.424 [CommandLine](IMPORTANT): BPC1.BattTemp_57 (celsius)
2016-07-21T16:56:41.433Z,1469120201.433 [CommandLine](IMPORTANT): BPC1.BattVoltage_57 (volt)
2016-07-21T16:56:41.433Z,1469120201.434 [CommandLine](IMPORTANT): BPC1.BattCurrent_57 (ampere)
2016-07-21T16:56:41.434Z,1469120201.434 [CommandLine](IMPORTANT): BPC1.BattCapacity_57 (ampere_hour)
2016-07-21T16:56:41.434Z,1469120201.434 [CommandLine](IMPORTANT): BPC1.BattStatus_57 (enum)
2016-07-21T16:56:41.435Z,1469120201.435 [CommandLine](IMPORTANT): BPC1.BattSerial_57 (count)
2016-07-21T16:56:41.435Z,1469120201.435 [CommandLine](IMPORTANT): BPC1.BattTemp_58 (celsius)
2016-07-21T16:56:41.435Z,1469120201.435 [CommandLine](IMPORTANT): BPC1.BattVoltage_58 (volt)
2016-07-21T16:56:41.436Z,1469120201.436 [CommandLine](IMPORTANT): BPC1.BattCurrent_58 (ampere)
2016-07-21T16:56:41.436Z,1469120201.436 [CommandLine](IMPORTANT): BPC1.BattCapacity_58 (ampere_hour)
2016-07-21T16:56:41.436Z,1469120201.436 [CommandLine](IMPORTANT): BPC1.BattStatus_58 (enum)
2016-07-21T16:56:41.474Z,1469120201.474 [CommandLine](IMPORTANT): BPC1.BattSerial_58 (count)
2016-07-21T16:56:41.497Z,1469120201.497 [CommandLine](IMPORTANT): BPC1.BattTemp_59 (celsius)
2016-07-21T16:56:41.497Z,1469120201.497 [CommandLine](IMPORTANT): BPC1.BattVoltage_59 (volt)
2016-07-21T16:56:41.498Z,1469120201.498 [CommandLine](IMPORTANT): BPC1.BattCurrent_59 (ampere)
2016-07-21T16:56:41.498Z,1469120201.498 [CommandLine](IMPORTANT): BPC1.BattCapacity_59 (ampere_hour)
2016-07-21T16:56:41.498Z,1469120201.499 [CommandLine](IMPORTANT): BPC1.BattStatus_59 (enum)
2016-07-21T16:56:41.499Z,1469120201.499 [CommandLine](IMPORTANT): BPC1.BattSerial_59 (count)
2016-07-21T16:56:41.499Z,1469120201.499 [CommandLine](IMPORTANT): BPC1.BattTemp_60 (celsius)
2016-07-21T16:56:41.500Z,1469120201.500 [CommandLine](IMPORTANT): BPC1.BattVoltage_60 (volt)
2016-07-21T16:56:41.500Z,1469120201.500 [CommandLine](IMPORTANT): BPC1.BattCurrent_60 (ampere)
2016-07-21T16:56:41.500Z,1469120201.500 [CommandLine](IMPORTANT): BPC1.BattCapacity_60 (ampere_hour)
2016-07-21T16:56:41.509Z,1469120201.509 [CommandLine](IMPORTANT): BPC1.BattStatus_60 (enum)
2016-07-21T16:56:41.509Z,1469120201.509 [CommandLine](IMPORTANT): BPC1.BattSerial_60 (count)
2016-07-21T16:56:41.510Z,1469120201.510 [CommandLine](IMPORTANT): BPC1.BattTemp_61 (celsius)
2016-07-21T16:56:41.510Z,1469120201.510 [CommandLine](IMPORTANT): BPC1.BattVoltage_61 (volt)
2016-07-21T16:56:41.510Z,1469120201.510 [CommandLine](IMPORTANT): BPC1.BattCurrent_61 (ampere)
2016-07-21T16:56:41.511Z,1469120201.511 [CommandLine](IMPORTANT): BPC1.BattCapacity_61 (ampere_hour)
2016-07-21T16:56:41.511Z,1469120201.511 [CommandLine](IMPORTANT): BPC1.BattStatus_61 (enum)
2016-07-21T16:56:41.512Z,1469120201.511 [CommandLine](IMPORTANT): BPC1.BattSerial_61 (count)
2016-07-21T16:56:41.512Z,1469120201.512 [CommandLine](IMPORTANT): BPC1.platform_battery_charge (ampere_hour)
2016-07-21T16:56:41.512Z,1469120201.512 [CommandLine](IMPORTANT): BPC1.platform_battery_voltage (unspecified)
2016-07-21T16:56:41.545Z,1469120201.545 [CommandLine](IMPORTANT): BPC1.platform_battery_discharging (bool)
2016-07-21T16:56:41.545Z,1469120201.545 [CommandLine](IMPORTANT): BPC1.platform_battery_fully_charged (bool)
2016-07-21T16:56:41.547Z,1469120201.547 [CommandLine](IMPORTANT): BPC1.durationOfLastRun (second)
2016-07-21T16:56:41.556Z,1469120201.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:41.878Z,1469120201.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:42.299Z,1469120202.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:42.700Z,1469120202.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:43.091Z,1469120203.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:43.492Z,1469120203.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:43.890Z,1469120203.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:44.300Z,1469120204.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:44.695Z,1469120204.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:45.114Z,1469120205.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:45.514Z,1469120205.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:45.911Z,1469120205.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:46.313Z,1469120206.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:46.681Z,1469120206.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:47.087Z,1469120207.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:47.366Z,1469120207.366 [NavChartDb](INFO): Calculating coverage of Resources/ElectronicNavigationCharts/US4AK5JM.000
2016-07-21T16:56:47.525Z,1469120207.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:47.891Z,1469120207.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:48.335Z,1469120208.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:48.699Z,1469120208.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:48.863Z,1469120208.863 [NavChartDb](INFO): # of records loaded: 65000
2016-07-21T16:56:49.090Z,1469120209.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:49.482Z,1469120209.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:49.911Z,1469120209.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:50.299Z,1469120210.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:50.696Z,1469120210.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:51.091Z,1469120211.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:51.507Z,1469120211.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:51.903Z,1469120211.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:52.319Z,1469120212.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:52.677Z,1469120212.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:53.088Z,1469120213.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:53.421Z,1469120213.421 [NavChartDb](INFO): Done scanning edges of Resources/ElectronicNavigationCharts/US4AK5JM.000
2016-07-21T16:56:53.499Z,1469120213.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:53.902Z,1469120213.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:54.303Z,1469120214.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:54.703Z,1469120214.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:55.119Z,1469120215.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:55.505Z,1469120215.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:55.903Z,1469120215.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:56.282Z,1469120216.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:56.688Z,1469120216.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:57.095Z,1469120217.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:57.530Z,1469120217.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:57.904Z,1469120217.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:58.295Z,1469120218.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:58.678Z,1469120218.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:59.103Z,1469120219.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:59.519Z,1469120219.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:56:59.902Z,1469120219.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:00.323Z,1469120220.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:00.709Z,1469120220.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:00.846Z,1469120220.846 [CommandLine](IMPORTANT): got command get BPC1.loadAtStartup
2016-07-21T16:57:00.846Z,1469120220.846 [CommandLine](IMPORTANT): BPC1.loadAtStartup 1 bool
2016-07-21T16:57:01.110Z,1469120221.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:01.488Z,1469120221.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:01.917Z,1469120221.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:02.290Z,1469120222.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:02.686Z,1469120222.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:03.097Z,1469120223.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:03.502Z,1469120223.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:03.904Z,1469120223.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:04.301Z,1469120224.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:04.686Z,1469120224.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:05.084Z,1469120225.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:05.488Z,1469120225.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:05.895Z,1469120225.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:06.299Z,1469120226.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:06.524Z,1469120226.524 [NavChartDb](INFO): # of records loaded: 70000
2016-07-21T16:57:06.738Z,1469120226.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:07.137Z,1469120227.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:07.499Z,1469120227.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:07.899Z,1469120227.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:08.303Z,1469120228.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:08.706Z,1469120228.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:09.107Z,1469120229.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:09.527Z,1469120229.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:09.904Z,1469120229.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:10.323Z,1469120230.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:10.679Z,1469120230.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:11.078Z,1469120231.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:11.491Z,1469120231.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:11.880Z,1469120231.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:12.299Z,1469120232.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:12.714Z,1469120232.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:13.106Z,1469120233.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:13.487Z,1469120233.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:13.900Z,1469120233.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:14.052Z,1469120234.052 [NavChartDb](INFO): Done scanning nodes of Resources/ElectronicNavigationCharts/US4AK5JM.000
2016-07-21T16:57:14.152Z,1469120234.152 [NavChartDb](INFO): # of records loaded: 71604
2016-07-21T16:57:14.161Z,1469120234.161 [NavChartDb](IMPORTANT): Loaded Electronic Nav Chart data from US4AK5JM.000
2016-07-21T16:57:14.162Z,1469120234.162 [NavChartDb](INFO): Setup scan of Resources/ElectronicNavigationCharts/US4AK5BM.000
2016-07-21T16:57:14.310Z,1469120234.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:14.711Z,1469120234.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:15.096Z,1469120235.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:15.523Z,1469120235.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:15.919Z,1469120235.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:16.319Z,1469120236.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:16.723Z,1469120236.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:17.124Z,1469120237.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:17.527Z,1469120237.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:17.886Z,1469120237.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:18.324Z,1469120238.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:18.730Z,1469120238.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:19.133Z,1469120239.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:19.497Z,1469120239.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:19.896Z,1469120239.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:20.298Z,1469120240.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:20.699Z,1469120240.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:21.030Z,1469120241.030 [NavChartDb](INFO): Done scanning features of Resources/ElectronicNavigationCharts/US4AK5BM.000
2016-07-21T16:57:21.096Z,1469120241.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:21.507Z,1469120241.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:21.938Z,1469120241.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:22.303Z,1469120242.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:22.687Z,1469120242.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:23.092Z,1469120243.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:23.506Z,1469120243.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:23.546Z,1469120243.546 [CommandLine](IMPORTANT): got command failComponent
2016-07-21T16:57:23.546Z,1469120243.546 [CommandLine](IMPORTANT): Failed components:
2016-07-21T16:57:23.546Z,1469120243.546 [CommandLine](IMPORTANT): DropWeight: Hardware Fault
2016-07-21T16:57:23.546Z,1469120243.546 [CommandLine](IMPORTANT): Rowe_600LCM: Hardware Fault
2016-07-21T16:57:23.547Z,1469120243.547 [CommandLine](IMPORTANT): BPC1: Communications Fault
2016-07-21T16:57:23.882Z,1469120243.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:24.315Z,1469120244.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:24.715Z,1469120244.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:25.109Z,1469120245.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:25.488Z,1469120245.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:25.919Z,1469120245.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:26.295Z,1469120246.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:26.715Z,1469120246.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:27.082Z,1469120247.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:27.499Z,1469120247.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:27.925Z,1469120247.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:28.290Z,1469120248.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:28.698Z,1469120248.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:29.095Z,1469120249.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:29.491Z,1469120249.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:29.886Z,1469120249.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:30.307Z,1469120250.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:30.698Z,1469120250.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:31.972Z,1469120251.972 [NavChartDb](INFO): # of records loaded: 5000
2016-07-21T16:57:37.122Z,1469120257.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:37.267Z,1469120257.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:37.634Z,1469120257.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:38.035Z,1469120258.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:38.439Z,1469120258.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:38.837Z,1469120258.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:39.235Z,1469120259.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:39.647Z,1469120259.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:40.047Z,1469120260.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:40.414Z,1469120260.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:40.823Z,1469120260.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:41.248Z,1469120261.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:41.651Z,1469120261.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:42.062Z,1469120262.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:42.427Z,1469120262.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:42.847Z,1469120262.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:43.027Z,1469120263.027 [NavChartDb](INFO): # of records loaded: 10000
2016-07-21T16:57:43.242Z,1469120263.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:43.642Z,1469120263.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:44.042Z,1469120264.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:44.436Z,1469120264.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:44.844Z,1469120264.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:45.206Z,1469120265.206 [CommandLine](IMPORTANT): got command get BPC1A.uart
2016-07-21T16:57:45.206Z,1469120265.206 [CommandLine](IMPORTANT): BPC1A.uart /dev/ttyTX0
2016-07-21T16:57:45.254Z,1469120265.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:45.647Z,1469120265.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:46.040Z,1469120266.040 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:46.041Z,1469120266.041 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 6
2016-07-21T16:57:46.041Z,1469120266.041 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-07-21T16:57:46.054Z,1469120266.054 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:46.054Z,1469120266.054 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2016-07-21T16:57:46.054Z,1469120266.054 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2016-07-21T16:57:46.056Z,1469120266.056 [DeadReckonWithRespectToWater](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:46.056Z,1469120266.056 [DeadReckonWithRespectToWater] Software Fault, FailCount= 6
2016-07-21T16:57:46.056Z,1469120266.056 [DeadReckonWithRespectToWater](ERROR): Software Fault
2016-07-21T16:57:46.058Z,1469120266.058 [DeadReckonWithRespectToSeafloor](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:46.058Z,1469120266.059 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2016-07-21T16:57:46.059Z,1469120266.059 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-07-21T16:57:46.060Z,1469120266.060 [DeadReckonUsingDVLWaterTrack](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:46.060Z,1469120266.060 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 6
2016-07-21T16:57:46.061Z,1469120266.061 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-07-21T16:57:46.147Z,1469120266.147 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-07-21T16:57:46.148Z,1469120266.148 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2016-07-21T16:57:46.148Z,1469120266.148 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToWater
2016-07-21T16:57:46.148Z,1469120266.148 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-07-21T16:57:46.148Z,1469120266.148 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-07-21T16:57:46.474Z,1469120266.474 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-07-21T16:57:46.474Z,1469120266.474 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 6
2016-07-21T16:57:46.475Z,1469120266.475 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2016-07-21T16:57:46.475Z,1469120266.475 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2016-07-21T16:57:46.475Z,1469120266.475 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToWater
2016-07-21T16:57:46.475Z,1469120266.475 [DeadReckonWithRespectToWater] No Fault, FailCount= 6
2016-07-21T16:57:46.476Z,1469120266.476 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-07-21T16:57:46.476Z,1469120266.476 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2016-07-21T16:57:46.477Z,1469120266.477 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-07-21T16:57:46.477Z,1469120266.477 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 6
2016-07-21T16:57:46.834Z,1469120266.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-07-21T16:57:46.835Z,1469120266.835 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-07-21T16:57:46.835Z,1469120266.835 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-07-21T16:57:46.835Z,1469120266.835 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2016-07-21T16:57:46.836Z,1469120266.836 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2016-07-21T16:57:46.836Z,1469120266.836 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2016-07-21T16:57:46.836Z,1469120266.836 [DeadReckonWithRespectToWater](DEBUG): Initializing DeadReckonWithRespectToWater component.
2016-07-21T16:57:46.841Z,1469120266.841 [DeadReckonWithRespectToWater](INFO): Will consider orientation measurement stale after 120s.
2016-07-21T16:57:46.841Z,1469120266.842 [DeadReckonWithRespectToWater](INFO): Will consider velocity measurement stale after 20s.
2016-07-21T16:57:46.842Z,1469120266.842 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-07-21T16:57:46.842Z,1469120266.842 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-07-21T16:57:46.843Z,1469120266.843 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-07-21T16:57:46.843Z,1469120266.843 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-07-21T16:57:46.844Z,1469120266.843 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-07-21T16:57:46.844Z,1469120266.844 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-07-21T16:57:47.230Z,1469120267.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-07-21T16:57:47.231Z,1469120267.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:47.668Z,1469120267.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-07-21T16:57:47.669Z,1469120267.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:48.030Z,1469120268.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-07-21T16:57:48.031Z,1469120268.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:48.463Z,1469120268.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-07-21T16:57:48.464Z,1469120268.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:48.834Z,1469120268.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-07-21T16:57:48.835Z,1469120268.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:49.082Z,1469120269.082 [CommandLine](IMPORTANT): got command get BPC1B.uart
2016-07-21T16:57:49.082Z,1469120269.082 [CommandLine](IMPORTANT): BPC1B.uart /dev/ttyTX2
2016-07-21T16:57:49.234Z,1469120269.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-07-21T16:57:49.235Z,1469120269.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:49.634Z,1469120269.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-07-21T16:57:49.635Z,1469120269.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:50.034Z,1469120270.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-07-21T16:57:50.035Z,1469120270.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:50.430Z,1469120270.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-07-21T16:57:50.431Z,1469120270.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:50.830Z,1469120270.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-07-21T16:57:50.831Z,1469120270.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:51.235Z,1469120271.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-07-21T16:57:51.236Z,1469120271.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:51.642Z,1469120271.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-07-21T16:57:51.643Z,1469120271.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:52.042Z,1469120272.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-07-21T16:57:52.043Z,1469120272.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:52.439Z,1469120272.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-07-21T16:57:52.440Z,1469120272.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:52.842Z,1469120272.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-07-21T16:57:52.843Z,1469120272.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:53.241Z,1469120273.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2016-07-21T16:57:53.242Z,1469120273.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:53.312Z,1469120273.312 [NavChartDb](INFO): # of records loaded: 15000
2016-07-21T16:57:53.638Z,1469120273.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2016-07-21T16:57:53.639Z,1469120273.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:54.016Z,1469120274.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2016-07-21T16:57:54.017Z,1469120274.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:54.457Z,1469120274.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2016-07-21T16:57:54.458Z,1469120274.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:54.847Z,1469120274.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2016-07-21T16:57:54.848Z,1469120274.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:55.252Z,1469120275.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2016-07-21T16:57:55.267Z,1469120275.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:55.658Z,1469120275.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2016-07-21T16:57:55.659Z,1469120275.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:56.014Z,1469120276.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2016-07-21T16:57:56.015Z,1469120276.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:56.423Z,1469120276.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2016-07-21T16:57:56.424Z,1469120276.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:56.834Z,1469120276.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2016-07-21T16:57:56.835Z,1469120276.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:57.226Z,1469120277.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2016-07-21T16:57:57.227Z,1469120277.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:57.662Z,1469120277.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2016-07-21T16:57:57.663Z,1469120277.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:58.026Z,1469120278.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2016-07-21T16:57:58.027Z,1469120278.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:58.434Z,1469120278.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2016-07-21T16:57:58.435Z,1469120278.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:58.838Z,1469120278.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2016-07-21T16:57:58.840Z,1469120278.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:59.234Z,1469120279.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2016-07-21T16:57:59.235Z,1469120279.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:57:59.627Z,1469120279.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2016-07-21T16:57:59.628Z,1469120279.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:00.038Z,1469120280.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2016-07-21T16:58:00.040Z,1469120280.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:00.436Z,1469120280.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2016-07-21T16:58:00.449Z,1469120280.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:00.846Z,1469120280.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2016-07-21T16:58:00.847Z,1469120280.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:01.246Z,1469120281.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2016-07-21T16:58:01.247Z,1469120281.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:01.627Z,1469120281.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2016-07-21T16:58:01.628Z,1469120281.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:02.038Z,1469120282.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2016-07-21T16:58:02.039Z,1469120282.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:02.429Z,1469120282.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2016-07-21T16:58:02.430Z,1469120282.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:02.830Z,1469120282.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2016-07-21T16:58:02.831Z,1469120282.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:03.243Z,1469120283.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2016-07-21T16:58:03.244Z,1469120283.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:03.638Z,1469120283.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2016-07-21T16:58:03.639Z,1469120283.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:04.042Z,1469120284.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2016-07-21T16:58:04.043Z,1469120284.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:04.422Z,1469120284.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2016-07-21T16:58:04.423Z,1469120284.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:04.524Z,1469120284.524 [NavChartDb](INFO): # of records loaded: 20000
2016-07-21T16:58:04.829Z,1469120284.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2016-07-21T16:58:04.830Z,1469120284.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:05.229Z,1469120285.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2016-07-21T16:58:05.230Z,1469120285.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:05.639Z,1469120285.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2016-07-21T16:58:05.640Z,1469120285.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:06.030Z,1469120286.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2016-07-21T16:58:06.031Z,1469120286.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:06.435Z,1469120286.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:06.854Z,1469120286.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:07.230Z,1469120287.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:07.627Z,1469120287.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:08.030Z,1469120288.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:08.463Z,1469120288.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:08.841Z,1469120288.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:09.246Z,1469120289.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:09.639Z,1469120289.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:10.035Z,1469120290.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:10.443Z,1469120290.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:10.831Z,1469120290.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:11.231Z,1469120291.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:11.642Z,1469120291.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:12.031Z,1469120292.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:12.467Z,1469120292.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:12.846Z,1469120292.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:13.247Z,1469120293.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:13.626Z,1469120293.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:14.041Z,1469120294.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:14.428Z,1469120294.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:14.839Z,1469120294.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:15.246Z,1469120295.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:15.646Z,1469120295.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:16.064Z,1469120296.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:16.455Z,1469120296.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:16.552Z,1469120296.552 [NavChartDb](INFO): # of records loaded: 25000
2016-07-21T16:58:16.823Z,1469120296.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:17.247Z,1469120297.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:17.656Z,1469120297.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:18.043Z,1469120298.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:18.467Z,1469120298.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:18.831Z,1469120298.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:19.244Z,1469120299.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:19.634Z,1469120299.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:20.034Z,1469120300.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:20.430Z,1469120300.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:20.835Z,1469120300.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:21.246Z,1469120301.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:21.645Z,1469120301.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:22.043Z,1469120302.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:22.419Z,1469120302.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:22.820Z,1469120302.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:23.234Z,1469120303.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:23.634Z,1469120303.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:24.032Z,1469120304.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:24.467Z,1469120304.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:24.862Z,1469120304.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:25.247Z,1469120305.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:25.639Z,1469120305.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:26.035Z,1469120306.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:26.435Z,1469120306.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:26.819Z,1469120306.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:26.969Z,1469120306.969 [NavChartDb](INFO): # of records loaded: 30000
2016-07-21T16:58:27.226Z,1469120307.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:27.628Z,1469120307.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:28.056Z,1469120308.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:28.426Z,1469120308.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:28.824Z,1469120308.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:29.251Z,1469120309.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:29.264Z,1469120309.264 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-07-21T16:53:29.2Z
2016-07-21T16:58:29.264Z,1469120309.264 [Default:CheckIn:Read_GPS] Stopped
2016-07-21T16:58:29.264Z,1469120309.264 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-07-21T16:58:29.638Z,1469120309.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:31.307Z,1469120311.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:31.443Z,1469120311.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:37.419Z,1469120317.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:37.488Z,1469120317.488 [DataOverHttps](INFO): Sending 198 bytes from file Logs/20160721T163925/Courier0008.lzma
2016-07-21T16:58:37.572Z,1469120317.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:37.933Z,1469120317.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:38.282Z,1469120318.282 [DataOverHttps](INFO): Moved sent file to Logs/20160721T163925/Courier0008.lzma.bak
2016-07-21T16:58:38.282Z,1469120318.282 [DataOverHttps](INFO): SBD MOMSN=4352336
2016-07-21T16:58:38.318Z,1469120318.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:39.226Z,1469120319.226 [NavChartDb](INFO): # of records loaded: 35000
2016-07-21T16:58:39.276Z,1469120319.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:39.431Z,1469120319.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:45.462Z,1469120325.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:45.615Z,1469120325.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:45.986Z,1469120325.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:46.390Z,1469120326.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:46.791Z,1469120326.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:47.199Z,1469120327.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:52.483Z,1469120332.483 [NavChartDb](INFO): # of records loaded: 40000
2016-07-21T16:58:53.461Z,1469120333.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:53.550Z,1469120333.550 [DataOverHttps](INFO): Sending 2220 bytes from file Logs/20160721T163925/Express0009.lzma
2016-07-21T16:58:53.647Z,1469120333.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:54.003Z,1469120334.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:54.338Z,1469120334.338 [DataOverHttps](INFO): Moved sent file to Logs/20160721T163925/Express0009.lzma.bak
2016-07-21T16:58:54.338Z,1469120334.338 [DataOverHttps](INFO): SBD MOMSN=4352356
2016-07-21T16:58:54.407Z,1469120334.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:55.336Z,1469120335.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:58:55.362Z,1469120335.362 [Default:CheckIn:Read_Iridium] Stopped
2016-07-21T16:58:55.362Z,1469120335.362 [Default:CheckIn:C.Wait] Running Loop=1
2016-07-21T16:58:55.362Z,1469120335.362 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-07-21T16:58:55.479Z,1469120335.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:01.554Z,1469120341.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:01.695Z,1469120341.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:02.068Z,1469120342.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:02.461Z,1469120342.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:02.871Z,1469120342.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:03.274Z,1469120343.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:03.667Z,1469120343.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:04.069Z,1469120344.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:04.460Z,1469120344.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:04.859Z,1469120344.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:05.258Z,1469120345.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:05.665Z,1469120345.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:06.065Z,1469120346.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:06.475Z,1469120346.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:06.872Z,1469120346.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:07.261Z,1469120347.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:07.658Z,1469120347.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:08.062Z,1469120348.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:08.434Z,1469120348.434 [CommandLine](IMPORTANT): got command failComponent
2016-07-21T16:59:08.434Z,1469120348.434 [CommandLine](IMPORTANT): Failed components:
2016-07-21T16:59:08.434Z,1469120348.434 [CommandLine](IMPORTANT): DropWeight: Hardware Fault
2016-07-21T16:59:08.434Z,1469120348.434 [CommandLine](IMPORTANT): Rowe_600LCM: Hardware Fault
2016-07-21T16:59:08.435Z,1469120348.434 [CommandLine](IMPORTANT): BPC1: Communications Fault
2016-07-21T16:59:08.465Z,1469120348.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:08.908Z,1469120348.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:09.275Z,1469120349.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:09.683Z,1469120349.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:10.091Z,1469120350.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:10.295Z,1469120350.295 [CommandLine](IMPORTANT): got command failComponent
2016-07-21T16:59:10.295Z,1469120350.295 [CommandLine](IMPORTANT): Failed components:
2016-07-21T16:59:10.295Z,1469120350.295 [CommandLine](IMPORTANT): DropWeight: Hardware Fault
2016-07-21T16:59:10.296Z,1469120350.296 [CommandLine](IMPORTANT): Rowe_600LCM: Hardware Fault
2016-07-21T16:59:10.296Z,1469120350.296 [CommandLine](IMPORTANT): BPC1: Communications Fault
2016-07-21T16:59:10.471Z,1469120350.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:10.874Z,1469120350.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:11.280Z,1469120351.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:11.666Z,1469120351.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:12.090Z,1469120352.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:12.283Z,1469120352.283 [NavChartDb](INFO): # of records loaded: 45000
2016-07-21T16:59:12.491Z,1469120352.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:12.879Z,1469120352.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:13.282Z,1469120353.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:13.402Z,1469120353.402 [CommandLine](IMPORTANT): got command failComponent none BPC1
2016-07-21T16:59:13.402Z,1469120353.402 [BPC1] No Fault, FailCount= 12
2016-07-21T16:59:13.403Z,1469120353.403 [CommandLine](IMPORTANT): BPC1 failureMode is No Fault
2016-07-21T16:59:13.731Z,1469120353.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:14.076Z,1469120354.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:14.495Z,1469120354.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:14.888Z,1469120354.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:15.287Z,1469120355.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:15.691Z,1469120355.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:16.093Z,1469120356.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:16.463Z,1469120356.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:16.893Z,1469120356.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:17.268Z,1469120357.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:17.675Z,1469120357.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:18.083Z,1469120358.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:18.505Z,1469120358.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:18.892Z,1469120358.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:19.286Z,1469120359.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:19.652Z,1469120359.652 [BPC1](ERROR): Failed to parse bank B battery data
2016-07-21T16:59:19.652Z,1469120359.652 [BPC1] Data Fault, FailCount= 13
2016-07-21T16:59:19.652Z,1469120359.652 [BPC1](ERROR): Data Fault
2016-07-21T16:59:19.664Z,1469120359.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:19.741Z,1469120359.741 [CBIT](ERROR): Data Fault in component: BPC1
2016-07-21T16:59:19.741Z,1469120359.741 [CBIT](CRITICAL): Data Fault in component: BPC1
2016-07-21T16:59:20.096Z,1469120360.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:20.474Z,1469120360.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:20.859Z,1469120360.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:21.275Z,1469120361.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:21.702Z,1469120361.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:22.083Z,1469120362.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:22.113Z,1469120362.113 [NavChartDb](INFO): # of records loaded: 50000
2016-07-21T16:59:22.469Z,1469120362.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:22.874Z,1469120362.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:23.268Z,1469120363.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:23.670Z,1469120363.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:24.071Z,1469120364.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:24.479Z,1469120364.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:24.879Z,1469120364.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:25.282Z,1469120365.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:25.679Z,1469120365.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:26.079Z,1469120366.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:26.476Z,1469120366.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:26.869Z,1469120366.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:27.275Z,1469120367.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:27.698Z,1469120367.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:28.103Z,1469120368.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:28.471Z,1469120368.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:28.864Z,1469120368.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:29.279Z,1469120369.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:29.682Z,1469120369.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:30.091Z,1469120370.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:30.492Z,1469120370.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:30.899Z,1469120370.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:31.271Z,1469120371.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:31.671Z,1469120371.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:32.071Z,1469120372.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:32.265Z,1469120372.265 [NavChartDb](INFO): # of records loaded: 55000
2016-07-21T16:59:32.482Z,1469120372.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:32.869Z,1469120372.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:33.283Z,1469120373.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:33.703Z,1469120373.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:34.080Z,1469120374.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:34.471Z,1469120374.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:34.876Z,1469120374.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:35.275Z,1469120375.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:35.714Z,1469120375.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:35.814Z,1469120375.814 [CommandLine](IMPORTANT): got command failComponent
2016-07-21T16:59:35.814Z,1469120375.814 [CommandLine](IMPORTANT): Failed components:
2016-07-21T16:59:35.814Z,1469120375.814 [CommandLine](IMPORTANT): DropWeight: Hardware Fault
2016-07-21T16:59:35.814Z,1469120375.814 [CommandLine](IMPORTANT): Rowe_600LCM: Hardware Fault
2016-07-21T16:59:35.815Z,1469120375.815 [CommandLine](IMPORTANT): BPC1: Data Fault
2016-07-21T16:59:36.094Z,1469120376.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:36.498Z,1469120376.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:36.899Z,1469120376.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:37.271Z,1469120377.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:37.667Z,1469120377.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:38.066Z,1469120378.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:38.470Z,1469120378.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:38.868Z,1469120378.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:39.279Z,1469120379.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:39.674Z,1469120379.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:40.071Z,1469120380.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:40.468Z,1469120380.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:40.887Z,1469120380.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:41.279Z,1469120381.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:41.324Z,1469120381.324 [CBIT](DEBUG): EFC running - data check-sum false
2016-07-21T16:59:41.673Z,1469120381.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:42.081Z,1469120382.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:42.488Z,1469120382.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:42.891Z,1469120382.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:43.273Z,1469120383.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:43.670Z,1469120383.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:44.078Z,1469120384.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:44.190Z,1469120384.190 [NavChartDb](INFO): # of records loaded: 60000
2016-07-21T16:59:44.467Z,1469120384.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:44.876Z,1469120384.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:45.270Z,1469120385.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:45.682Z,1469120385.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:46.092Z,1469120386.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:46.474Z,1469120386.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:46.874Z,1469120386.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:47.274Z,1469120387.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:47.694Z,1469120387.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:48.079Z,1469120388.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:48.474Z,1469120388.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:48.878Z,1469120388.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:49.262Z,1469120389.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:49.671Z,1469120389.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:50.075Z,1469120390.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:50.486Z,1469120390.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:50.879Z,1469120390.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:51.271Z,1469120391.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:51.690Z,1469120391.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:52.089Z,1469120392.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:52.454Z,1469120392.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:52.859Z,1469120392.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:53.283Z,1469120393.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:53.681Z,1469120393.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:54.091Z,1469120394.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:54.492Z,1469120394.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:54.866Z,1469120394.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:55.279Z,1469120395.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:55.671Z,1469120395.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:56.075Z,1469120396.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T16:59:56.953Z,1469120396.953 [NavChartDb](INFO): # of records loaded: 65000
2016-07-21T17:00:02.221Z,1469120402.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:02.266Z,1469120402.266 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-07-21T17:00:02.266Z,1469120402.266 [Rowe_600LCM] No Fault, FailCount= 5
2016-07-21T17:00:02.349Z,1469120402.349 [Rowe_600LCM](INFO): Initializing
2016-07-21T17:00:02.350Z,1469120402.350 [Rowe_600LCM](INFO): Checking LCM
2016-07-21T17:00:02.350Z,1469120402.350 [Rowe_600LCM](FAULT): LCM not connected
2016-07-21T17:00:02.350Z,1469120402.350 [Rowe_600LCM] Hardware Fault, FailCount= 1
2016-07-21T17:00:02.350Z,1469120402.350 [Rowe_600LCM](ERROR): Hardware Fault
2016-07-21T17:00:02.390Z,1469120402.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:02.430Z,1469120402.430 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2016-07-21T17:00:02.750Z,1469120402.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:02.753Z,1469120402.753 [Rowe_600LCM](INFO): Powering down
2016-07-21T17:00:03.160Z,1469120403.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:03.547Z,1469120403.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:03.937Z,1469120403.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:03.984Z,1469120403.984 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-07-21T17:00:03.984Z,1469120403.984 [Rowe_600LCM] No Fault, FailCount= 1
2016-07-21T17:00:04.333Z,1469120404.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:04.385Z,1469120404.385 [Rowe_600LCM](INFO): Initializing
2016-07-21T17:00:04.397Z,1469120404.397 [Rowe_600LCM](INFO): Checking LCM
2016-07-21T17:00:04.397Z,1469120404.397 [Rowe_600LCM](FAULT): LCM not connected
2016-07-21T17:00:04.397Z,1469120404.397 [Rowe_600LCM] Hardware Fault, FailCount= 2
2016-07-21T17:00:04.398Z,1469120404.398 [Rowe_600LCM](ERROR): Hardware Fault
2016-07-21T17:00:04.748Z,1469120404.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:04.801Z,1469120404.801 [Rowe_600LCM](INFO): Powering down
2016-07-21T17:00:04.803Z,1469120404.803 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2016-07-21T17:00:05.156Z,1469120405.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:05.563Z,1469120405.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:05.955Z,1469120405.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:06.359Z,1469120406.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:06.421Z,1469120406.421 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-07-21T17:00:06.421Z,1469120406.421 [Rowe_600LCM] No Fault, FailCount= 2
2016-07-21T17:00:06.738Z,1469120406.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:06.821Z,1469120406.821 [Rowe_600LCM](INFO): Initializing
2016-07-21T17:00:06.821Z,1469120406.821 [Rowe_600LCM](INFO): Checking LCM
2016-07-21T17:00:06.822Z,1469120406.822 [Rowe_600LCM](FAULT): LCM not connected
2016-07-21T17:00:06.822Z,1469120406.822 [Rowe_600LCM] Hardware Fault, FailCount= 3
2016-07-21T17:00:06.822Z,1469120406.822 [Rowe_600LCM](ERROR): Hardware Fault
2016-07-21T17:00:07.158Z,1469120407.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:07.206Z,1469120407.206 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2016-07-21T17:00:07.225Z,1469120407.225 [Rowe_600LCM](INFO): Powering down
2016-07-21T17:00:07.545Z,1469120407.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:07.951Z,1469120407.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:08.358Z,1469120408.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:08.756Z,1469120408.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:08.821Z,1469120408.821 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-07-21T17:00:08.821Z,1469120408.821 [Rowe_600LCM] No Fault, FailCount= 3
2016-07-21T17:00:08.841Z,1469120408.841 [Rowe_600LCM](INFO): Initializing
2016-07-21T17:00:08.841Z,1469120408.842 [Rowe_600LCM](INFO): Checking LCM
2016-07-21T17:00:08.842Z,1469120408.842 [Rowe_600LCM](FAULT): LCM not connected
2016-07-21T17:00:08.842Z,1469120408.842 [Rowe_600LCM] Hardware Fault, FailCount= 4
2016-07-21T17:00:08.842Z,1469120408.842 [Rowe_600LCM](ERROR): Hardware Fault
2016-07-21T17:00:09.128Z,1469120409.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:09.195Z,1469120409.195 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2016-07-21T17:00:09.245Z,1469120409.245 [Rowe_600LCM](INFO): Powering down
2016-07-21T17:00:09.551Z,1469120409.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:09.960Z,1469120409.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:10.367Z,1469120410.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:10.756Z,1469120410.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:10.805Z,1469120410.805 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-07-21T17:00:10.805Z,1469120410.805 [Rowe_600LCM] No Fault, FailCount= 4
2016-07-21T17:00:10.861Z,1469120410.861 [Rowe_600LCM](INFO): Initializing
2016-07-21T17:00:10.862Z,1469120410.862 [Rowe_600LCM](INFO): Checking LCM
2016-07-21T17:00:10.862Z,1469120410.862 [Rowe_600LCM](FAULT): LCM not connected
2016-07-21T17:00:10.862Z,1469120410.862 [Rowe_600LCM] Hardware Fault, FailCount= 5
2016-07-21T17:00:10.862Z,1469120410.862 [Rowe_600LCM](ERROR): Hardware Fault
2016-07-21T17:00:11.032Z,1469120411.032 [NavChartDb](INFO): # of records loaded: 70000
2016-07-21T17:00:11.167Z,1469120411.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:11.215Z,1469120411.215 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2016-07-21T17:00:11.216Z,1469120411.216 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2016-07-21T17:00:11.265Z,1469120411.265 [Rowe_600LCM](INFO): Powering down
2016-07-21T17:00:11.543Z,1469120411.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:11.966Z,1469120411.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:12.367Z,1469120412.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:12.764Z,1469120412.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:13.128Z,1469120413.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:13.551Z,1469120413.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:13.898Z,1469120413.898 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-07-21T17:00:13.898Z,1469120413.898 [NAL9602] Data Fault, FailCount= 2
2016-07-21T17:00:13.898Z,1469120413.898 [NAL9602](ERROR): Data Fault
2016-07-21T17:00:13.956Z,1469120413.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:14.000Z,1469120414.000 [CBIT](ERROR): Data Fault in component: NAL9602
2016-07-21T17:00:14.290Z,1469120414.290 [NAL9602](INFO): Powering down
2016-07-21T17:00:14.343Z,1469120414.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:14.751Z,1469120414.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:15.144Z,1469120415.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:15.187Z,1469120415.187 [CBIT](INFO): Clearing failed state for component NAL9602
2016-07-21T17:00:15.187Z,1469120415.187 [NAL9602] No Fault, FailCount= 2
2016-07-21T17:00:15.545Z,1469120415.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:15.955Z,1469120415.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:16.356Z,1469120416.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:16.732Z,1469120416.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:17.157Z,1469120417.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:17.569Z,1469120417.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:17.927Z,1469120417.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:18.326Z,1469120418.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:18.719Z,1469120418.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:19.121Z,1469120419.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:19.490Z,1469120419.490 [NAL9602](INFO): Powering up NAL9602
2016-07-21T17:00:19.526Z,1469120419.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:19.921Z,1469120419.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:20.351Z,1469120420.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:20.739Z,1469120420.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:21.122Z,1469120421.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:21.536Z,1469120421.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:21.947Z,1469120421.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:22.330Z,1469120422.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:22.736Z,1469120422.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:23.131Z,1469120423.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:23.548Z,1469120423.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:23.940Z,1469120423.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:24.340Z,1469120424.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:24.755Z,1469120424.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:25.147Z,1469120425.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:25.528Z,1469120425.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:25.744Z,1469120425.744 [NavChartDb](INFO): # of records loaded: 75000
2016-07-21T17:00:25.959Z,1469120425.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:26.339Z,1469120426.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:26.735Z,1469120426.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:27.157Z,1469120427.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:27.548Z,1469120427.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:27.953Z,1469120427.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:28.243Z,1469120428.243 [NavChartDb](INFO): Calculating coverage of Resources/ElectronicNavigationCharts/US4AK5BM.000
2016-07-21T17:00:28.359Z,1469120428.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:28.755Z,1469120428.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:29.157Z,1469120429.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:29.575Z,1469120429.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:29.961Z,1469120429.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:30.290Z,1469120430.290 [NAL9602](INFO): NAL9602 initialized
2016-07-21T17:00:30.363Z,1469120430.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:30.771Z,1469120430.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:31.148Z,1469120431.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:31.582Z,1469120431.582 [CommandLine](IMPORTANT): got command restart application
2016-07-21T17:00:31.595Z,1469120431.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:31.962Z,1469120431.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:32.349Z,1469120432.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:32.588Z,1469120432.588 [CommandLine ThreadHandler](INFO): Uninitializing protected caller thread.
2016-07-21T17:00:32.588Z,1469120432.588 [CommandLine ThreadHandler](INFO): Thread cancelled.
2016-07-21T17:00:32.605Z,1469120432.605 [Supervisor](DEBUG): Uninitializing supervisor and starting cleanup.  Bye!
2016-07-21T17:00:32.605Z,1469120432.605 [CommandLine ThreadHandler](INFO): Thread cancelled.
2016-07-21T17:00:32.606Z,1469120432.606 [CommandLine](INFO): Join timeout helper Thread ID is 947
2016-07-21T17:00:32.607Z,1469120432.606 [ComponentRegistry](INFO): Shutting down NavChartDb ThreadHandler
2016-07-21T17:00:32.607Z,1469120432.607 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2016-07-21T17:00:32.607Z,1469120432.607 [NavChartDb](INFO): Join timeout helper Thread ID is 948
2016-07-21T17:00:32.609Z,1469120432.609 [NavChartDb ThreadHandler](INFO): Uninitializing protected caller thread.
2016-07-21T17:00:32.609Z,1469120432.609 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2016-07-21T17:00:32.625Z,1469120432.625 [ComponentRegistry](INFO): Shutting down Rowe_600LCM ThreadHandler
2016-07-21T17:00:32.625Z,1469120432.625 [Rowe_600LCM ThreadHandler](INFO): Thread cancelled.
2016-07-21T17:00:32.625Z,1469120432.625 [Rowe_600LCM](INFO): Join timeout helper Thread ID is 949
2016-07-21T17:00:32.729Z,1469120432.729 [Rowe_600LCM ThreadHandler](INFO): Uninitializing protected caller thread.
2016-07-21T17:00:32.730Z,1469120432.730 [Rowe_600LCM](INFO): Powering down
2016-07-21T17:00:32.730Z,1469120432.730 [Rowe_600LCM ThreadHandler](INFO): Thread cancelled.
2016-07-21T17:00:32.733Z,1469120432.733 [ComponentRegistry](INFO): Shutting down Radio_Surface ThreadHandler
2016-07-21T17:00:32.733Z,1469120432.733 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2016-07-21T17:00:32.734Z,1469120432.734 [Radio_Surface](INFO): Join timeout helper Thread ID is 950
2016-07-21T17:00:32.767Z,1469120432.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:33.049Z,1469120433.049 [Radio_Surface ThreadHandler](INFO): Uninitializing protected caller thread.
2016-07-21T17:00:33.049Z,1469120433.049 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2016-07-21T17:00:33.069Z,1469120433.069 [ComponentRegistry](INFO): Shutting down logger ThreadHandler
2016-07-21T17:00:33.069Z,1469120433.069 [logger ThreadHandler](INFO): Thread cancelled.
2016-07-21T17:00:33.069Z,1469120433.069 [logger](INFO): Join timeout helper Thread ID is 951
2016-07-21T17:00:33.095Z,1469120433.095 [logger ThreadHandler](INFO): Uninitializing protected caller thread.
2016-07-21T17:00:33.095Z,1469120433.095 [logger ThreadHandler](INFO): Thread cancelled.
2016-07-21T17:00:33.111Z,1469120433.111 [ComponentRegistry](INFO): Shutting down CommandLine ThreadHandler
2016-07-21T17:00:33.111Z,1469120433.111 [CommandLine ThreadHandler](INFO): Thread cancelled.
2016-07-21T17:00:33.111Z,1469120433.111 [ComponentRegistry](INFO): Shutting down controlThread ThreadHandler
2016-07-21T17:00:33.111Z,1469120433.111 [controlThread ThreadHandler](INFO): Thread cancelled.
2016-07-21T17:00:33.111Z,1469120433.111 [controlThread](INFO): Join timeout helper Thread ID is 952
2016-07-21T17:00:33.126Z,1469120433.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-07-21T17:00:33.144Z,1469120433.144 [controlThread ThreadHandler](INFO): Uninitializing protected caller thread.
2016-07-21T17:00:33.144Z,1469120433.144 [controlThread](DEBUG): Uninitializing ControlThread
2016-07-21T17:00:33.145Z,1469120433.145 [NAL9602](INFO): Powering down
2016-07-21T17:00:33.146Z,1469120433.146 [PNI_TCM](INFO): Powering down
2016-07-21T17:00:33.234Z,1469120433.234 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2016-07-21T17:00:33.235Z,1469120433.236 [NavChart](DEBUG): Uninitialize NavChart Navigation.
2016-07-21T17:00:33.236Z,1469120433.236 [Default] Stopped
2016-07-21T17:00:33.236Z,1469120433.236 [Default](DEBUG): Aggregate::uninitialize Default
2016-07-21T17:00:33.236Z,1469120433.236 [Default:B.GoToSurface] Stopped
2016-07-21T17:00:33.236Z,1469120433.236 [Default:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2016-07-21T17:00:33.236Z,1469120433.236 [Default:CheckIn] Stopped
2016-07-21T17:00:33.236Z,1469120433.237 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-07-21T17:00:33.236Z,1469120433.237 [Default:CheckIn:C.Wait] Stopped
2016-07-21T17:00:33.237Z,1469120433.237 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-07-21T17:00:33.239Z,1469120433.239 [VerticalControl](DEBUG): Uninitialize VerticalControlComponent.
2016-07-21T17:00:33.240Z,1469120433.240 [HorizontalControl](DEBUG): Uninitialize HorizontalControlComponent.
2016-07-21T17:00:33.240Z,1469120433.240 [SpeedControl](DEBUG): Uninitialize SpeedControlComponent.
2016-07-21T17:00:33.240Z,1469120433.240 [LoopControl](DEBUG): Uninitialize LoopControlComponent.
2016-07-21T17:00:33.240Z,1469120433.240 [BuoyancyServo](DEBUG): Uninitialize Buoyancy Servo.
2016-07-21T17:00:33.241Z,1469120433.240 [BuoyancyServo](INFO): Powering down
2016-07-21T17:00:33.253Z,1469120433.253 [ElevatorServo](DEBUG): Uninitialize Elevator Servo.
2016-07-21T17:00:33.253Z,1469120433.253 [ElevatorServo](INFO): Powering down
2016-07-21T17:00:33.254Z,1469120433.254 [MassServo](DEBUG): Uninitialize Mass Servo.
2016-07-21T17:00:33.254Z,1469120433.254 [MassServo](INFO): Powering down
2016-07-21T17:00:33.255Z,1469120433.255 [RudderServo](DEBUG): Uninitialize Rudder Servo.
2016-07-21T17:00:33.255Z,1469120433.255 [RudderServo](INFO): Powering down
2016-07-21T17:00:33.256Z,1469120433.256 [ThrusterServo](DEBUG): Uninitialize Thruster Servo.
2016-07-21T17:00:33.256Z,1469120433.256 [ThrusterServo](INFO): Powering down
2016-07-21T17:00:33.257Z,1469120433.257 [SBIT](DEBUG): Uninitialize SBIT Component.
2016-07-21T17:00:33.257Z,1469120433.257 [IBIT](DEBUG): Uninitialize IBIT Component.
2016-07-21T17:00:33.257Z,1469120433.257 [CBIT](DEBUG): Uninitialize CBIT Component.
2016-07-21T17:00:33.258Z,1469120433.258 [controlThread ThreadHandler](INFO): Thread cancelled.
2016-07-21T17:00:33.372Z,1469120433.372 [Rowe_600LCM ThreadHandler](INFO): Thread cancelled.
2016-07-21T17:00:33.378Z,1469120433.378 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2016-07-21T17:00:33.420Z,1469120433.420 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2016-07-21T17:00:33.461Z,1469120433.461 [logger ThreadHandler](INFO): Thread cancelled.