2018-03-11T00:13:15.143Z,1520727195.143 [Supervisor](DEBUG): Initializing supervisor.
2018-03-11T00:13:15.146Z,1520727195.146 [SyncHandler](DEBUG): Created PCaller Thread at 404514E0
2018-03-11T00:13:15.146Z,1520727195.146 [SyncHandler](INFO): Protected caller Thread ID is 803
2018-03-11T00:13:15.147Z,1520727195.147 [ComponentRegistry](DEBUG): Component "controlThread" handled in its own thread.
2018-03-11T00:13:15.149Z,1520727195.149 [controlThread ThreadHandler](DEBUG): Created PCaller Thread at 404814E0
2018-03-11T00:13:15.149Z,1520727195.149 [controlThread ThreadHandler](INFO): Protected caller Thread ID is 804
2018-03-11T00:13:15.152Z,1520727195.152 [ComponentRegistry](DEBUG): SyncComponent "CycleStarter" handled in the control thread.
2018-03-11T00:13:15.162Z,1520727195.162 [ComponentRegistry](DEBUG): Component "CommandLine" handled in its own thread.
2018-03-11T00:13:15.165Z,1520727195.165 [CommandLine ThreadHandler](DEBUG): Created PCaller Thread at 404B14E0
2018-03-11T00:13:15.165Z,1520727195.165 [CommandLine ThreadHandler](INFO): Protected caller Thread ID is 805
2018-03-11T00:13:15.166Z,1520727195.166 [ComponentRegistry](DEBUG): Component "logger" handled in its own thread.
2018-03-11T00:13:15.169Z,1520727195.169 [logger ThreadHandler](DEBUG): Created PCaller Thread at 404E14E0
2018-03-11T00:13:15.169Z,1520727195.169 [logger ThreadHandler](INFO): Protected caller Thread ID is 806
2018-03-11T00:13:15.171Z,1520727195.171 [ComponentRegistry](DEBUG): SyncComponent "LogSplitter" handled in the control thread.
2018-03-11T00:13:15.172Z,1520727195.172 [Supervisor](INFO): Looking for Config files in directory: Config/
2018-03-11T00:13:15.176Z,1520727195.176 [Supervisor](INFO): Opening Config file at: Config/BIT.cfg
2018-03-11T00:13:15.371Z,1520727195.371 [ComponentRegistry](DEBUG): Loaded Config Component "Config/BIT
2018-03-11T00:13:15.372Z,1520727195.372 [Supervisor](INFO): Opening Config file at: Config/Derivation.cfg
2018-03-11T00:13:15.518Z,1520727195.518 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Derivation
2018-03-11T00:13:15.521Z,1520727195.521 [Supervisor](INFO): Opening Config file at: Config/Control.cfg
2018-03-11T00:13:15.839Z,1520727195.839 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Control
2018-03-11T00:13:15.840Z,1520727195.840 [Supervisor](INFO): Opening Config file at: Config/Estimation.cfg
2018-03-11T00:13:15.983Z,1520727195.983 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Estimation
2018-03-11T00:13:15.984Z,1520727195.984 [Supervisor](INFO): Opening Config file at: Config/Guidance.cfg
2018-03-11T00:13:16.080Z,1520727196.080 [Supervisor](INFO): Opening Config file at: Config/Navigation.cfg
2018-03-11T00:13:16.275Z,1520727196.275 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Navigation
2018-03-11T00:13:16.276Z,1520727196.276 [Supervisor](INFO): Opening Config file at: Config/Sample.cfg
2018-03-11T00:13:16.380Z,1520727196.380 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sample
2018-03-11T00:13:16.380Z,1520727196.380 [Supervisor](INFO): Opening Config file at: Config/Science.cfg
2018-03-11T00:13:16.695Z,1520727196.695 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Science
2018-03-11T00:13:16.696Z,1520727196.696 [Supervisor](INFO): Opening Config file at: Config/Sensor.cfg
2018-03-11T00:13:17.044Z,1520727197.044 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sensor
2018-03-11T00:13:17.044Z,1520727197.044 [Supervisor](INFO): Opening Config file at: Config/Servo.cfg
2018-03-11T00:13:17.332Z,1520727197.332 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Servo
2018-03-11T00:13:17.333Z,1520727197.333 [Supervisor](INFO): Opening Config file at: Config/Simulator.cfg
2018-03-11T00:13:17.800Z,1520727197.800 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Simulator
2018-03-11T00:13:17.801Z,1520727197.801 [Supervisor](INFO): Opening Config file at: Config/logger.cfg
2018-03-11T00:13:17.995Z,1520727197.995 [ComponentRegistry](DEBUG): Loaded Config Component "Config/logger
2018-03-11T00:13:17.996Z,1520727197.996 [Supervisor](INFO): Opening Config file at: Config/secure.cfg
2018-03-11T00:13:18.107Z,1520727198.107 [ComponentRegistry](DEBUG): Loaded Config Component "Config/secure
2018-03-11T00:13:18.108Z,1520727198.108 [Supervisor](INFO): Opening Config file at: Config/vehicle.cfg
2018-03-11T00:13:22.283Z,1520727202.283 [ComponentRegistry](DEBUG): Loaded Config Component "Config/vehicle
2018-03-11T00:13:22.284Z,1520727202.284 [Supervisor](INFO): Opening Config file at: Config/workSite.cfg
2018-03-11T00:13:22.408Z,1520727202.408 [ComponentRegistry](DEBUG): Loaded Config Component "Config/workSite
2018-03-11T00:13:22.410Z,1520727202.410 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-ahi/
2018-03-11T00:13:22.413Z,1520727202.413 [Supervisor](INFO): Opening Config file at: Config/lrauv-ahi/Battery.cfg
2018-03-11T00:13:22.636Z,1520727202.636 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Battery
2018-03-11T00:13:22.636Z,1520727202.636 [Supervisor](INFO): Opening Config file at: Config/lrauv-ahi/BIT.cfg
2018-03-11T00:13:22.744Z,1520727202.744 [Supervisor](INFO): Opening Config file at: Config/lrauv-ahi/Navigation.cfg
2018-03-11T00:13:22.863Z,1520727202.863 [Supervisor](INFO): Opening Config file at: Config/lrauv-ahi/Control.cfg
2018-03-11T00:13:22.972Z,1520727202.972 [Supervisor](INFO): Opening Config file at: Config/lrauv-ahi/Simulator.cfg
2018-03-11T00:13:23.065Z,1520727203.065 [Supervisor](INFO): Opening Config file at: Config/lrauv-ahi/Science.cfg
2018-03-11T00:13:23.220Z,1520727203.220 [Supervisor](INFO): Opening Config file at: Config/lrauv-ahi/Sensor.cfg
2018-03-11T00:13:23.385Z,1520727203.385 [Supervisor](INFO): Opening Config file at: Config/lrauv-ahi/Servo.cfg
2018-03-11T00:13:23.496Z,1520727203.496 [Supervisor](INFO): Opening Config file at: Config/lrauv-ahi/logger.cfg
2018-03-11T00:13:23.604Z,1520727203.604 [Supervisor](INFO): Opening Config file at: Config/lrauv-ahi/secure.cfg
2018-03-11T00:13:23.700Z,1520727203.700 [Supervisor](INFO): Opening Config file at: Config/lrauv-ahi/vehicle.cfg
2018-03-11T00:13:23.864Z,1520727203.864 [Supervisor](IMPORTANT): Reading configuration overrides from Data/persisted.cfg
2018-03-11T00:13:23.877Z,1520727203.877 [Module Loader](DEBUG): Loading Module at Modules/BIT.so
2018-03-11T00:13:24.043Z,1520727204.043 [SBIT](DEBUG): Construct Startup Built In Test.
2018-03-11T00:13:24.073Z,1520727204.073 [SBIT] Loaded
2018-03-11T00:13:24.073Z,1520727204.073 [ComponentRegistry](DEBUG): SyncComponent "SBIT" handled in the control thread.
2018-03-11T00:13:24.074Z,1520727204.074 [IBIT](DEBUG): Construct Initiated Built In Test.
2018-03-11T00:13:24.100Z,1520727204.100 [IBIT] Loaded
2018-03-11T00:13:24.100Z,1520727204.100 [ComponentRegistry](DEBUG): SyncComponent "IBIT" handled in the control thread.
2018-03-11T00:13:24.103Z,1520727204.103 [CBIT](DEBUG): Construct Continuous Built In Test.
2018-03-11T00:13:24.255Z,1520727204.255 [CBIT] Loaded
2018-03-11T00:13:24.255Z,1520727204.255 [ComponentRegistry](DEBUG): SyncComponent "CBIT" handled in the control thread.
2018-03-11T00:13:24.256Z,1520727204.256 [Module Loader](DEBUG): Loaded Module: BIT (Contains the BuiltInTest components, such as C Built In Test)
2018-03-11T00:13:24.256Z,1520727204.256 [Module Loader](DEBUG): Loading Module at Modules/Control.so
2018-03-11T00:13:24.371Z,1520727204.371 [VerticalControl](DEBUG): Construct VerticalControl.
2018-03-11T00:13:24.465Z,1520727204.465 [VerticalControl] Loaded
2018-03-11T00:13:24.466Z,1520727204.466 [ComponentRegistry](DEBUG): SyncComponent "VerticalControl" handled in the control thread.
2018-03-11T00:13:24.466Z,1520727204.466 [HorizontalControl](DEBUG): Construct HorizontalControl.
2018-03-11T00:13:24.524Z,1520727204.524 [HorizontalControl] Loaded
2018-03-11T00:13:24.524Z,1520727204.524 [ComponentRegistry](DEBUG): SyncComponent "HorizontalControl" handled in the control thread.
2018-03-11T00:13:24.525Z,1520727204.525 [SpeedControl](DEBUG): Construct SpeedControl.
2018-03-11T00:13:24.530Z,1520727204.530 [SpeedControl] Loaded
2018-03-11T00:13:24.530Z,1520727204.530 [ComponentRegistry](DEBUG): SyncComponent "SpeedControl" handled in the control thread.
2018-03-11T00:13:24.531Z,1520727204.531 [LoopControl](DEBUG): Construct LoopControl.
2018-03-11T00:13:24.532Z,1520727204.532 [LoopControl] Loaded
2018-03-11T00:13:24.532Z,1520727204.532 [ComponentRegistry](DEBUG): SyncComponent "LoopControl" handled in the control thread.
2018-03-11T00:13:24.532Z,1520727204.532 [Module Loader](DEBUG): Loaded Module: Control (Contains the Control components, such as Depth, Heading, and Speed Control)
2018-03-11T00:13:24.533Z,1520727204.533 [Module Loader](DEBUG): Loading Module at Modules/Derivation.so
2018-03-11T00:13:24.598Z,1520727204.598 [DepthRateCalculator] Loaded
2018-03-11T00:13:24.598Z,1520727204.598 [ComponentRegistry](DEBUG): SyncComponent "DepthRateCalculator" handled in the control thread.
2018-03-11T00:13:24.603Z,1520727204.603 [PitchRateCalculator] Loaded
2018-03-11T00:13:24.604Z,1520727204.604 [ComponentRegistry](DEBUG): SyncComponent "PitchRateCalculator" handled in the control thread.
2018-03-11T00:13:24.619Z,1520727204.619 [SpeedCalculator] Loaded
2018-03-11T00:13:24.619Z,1520727204.619 [ComponentRegistry](DEBUG): SyncComponent "SpeedCalculator" handled in the control thread.
2018-03-11T00:13:24.644Z,1520727204.644 [TempGradientCalculator] Loaded
2018-03-11T00:13:24.645Z,1520727204.645 [ComponentRegistry](DEBUG): SyncComponent "TempGradientCalculator" handled in the control thread.
2018-03-11T00:13:24.660Z,1520727204.659 [VerticalTemperatureHomogeneityIndexCalculator] Loaded
2018-03-11T00:13:24.660Z,1520727204.660 [ComponentRegistry](DEBUG): SyncComponent "VerticalTemperatureHomogeneityIndexCalculator" handled in the control thread.
2018-03-11T00:13:24.665Z,1520727204.665 [YawRateCalculator] Loaded
2018-03-11T00:13:24.666Z,1520727204.666 [ComponentRegistry](DEBUG): SyncComponent "YawRateCalculator" handled in the control thread.
2018-03-11T00:13:24.666Z,1520727204.666 [Module Loader](DEBUG): Loaded Module: Derivation (Contains the base derivation components)
2018-03-11T00:13:24.667Z,1520727204.667 [Module Loader](DEBUG): Loading Module at Modules/Estimation.so
2018-03-11T00:13:24.811Z,1520727204.811 [StratificationFrontDetector](INFO): threshold set to: 0.399988 degC
2018-03-11T00:13:24.811Z,1520727204.811 [StratificationFrontDetector](DEBUG): (re)initializing
2018-03-11T00:13:24.811Z,1520727204.811 [StratificationFrontDetector] Loaded
2018-03-11T00:13:24.811Z,1520727204.811 [ComponentRegistry](DEBUG): SyncComponent "StratificationFrontDetector" handled in the control thread.
2018-03-11T00:13:24.812Z,1520727204.812 [Module Loader](DEBUG): Loaded Module: Estimation (Contains the base estimation components)
2018-03-11T00:13:24.813Z,1520727204.813 [Module Loader](DEBUG): Loading Module at Modules/Guidance.so
2018-03-11T00:13:25.117Z,1520727205.117 [Module Loader](DEBUG): Loaded Module: Guidance (Contains behaviors and commands)
2018-03-11T00:13:25.118Z,1520727205.118 [Module Loader](DEBUG): Loading Module at Modules/Navigation.so
2018-03-11T00:13:25.237Z,1520727205.237 [DeadReckonUsingMultipleVelocitySources] Loaded
2018-03-11T00:13:25.238Z,1520727205.238 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingMultipleVelocitySources" handled in the control thread.
2018-03-11T00:13:25.290Z,1520727205.290 [DeadReckonUsingSpeedCalculator] Loaded
2018-03-11T00:13:25.290Z,1520727205.290 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingSpeedCalculator" handled in the control thread.
2018-03-11T00:13:25.342Z,1520727205.342 [DeadReckonWithRespectToSeafloor] Loaded
2018-03-11T00:13:25.343Z,1520727205.343 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonWithRespectToSeafloor" handled in the control thread.
2018-03-11T00:13:25.358Z,1520727205.358 [NavChart] Loaded
2018-03-11T00:13:25.358Z,1520727205.358 [ComponentRegistry](DEBUG): SyncComponent "NavChart" handled in the control thread.
2018-03-11T00:13:25.362Z,1520727205.362 [UniversalFixResidualReporter] Loaded
2018-03-11T00:13:25.363Z,1520727205.363 [ComponentRegistry](DEBUG): SyncComponent "UniversalFixResidualReporter" handled in the control thread.
2018-03-11T00:13:25.363Z,1520727205.363 [Module Loader](DEBUG): Loaded Module: Navigation (Contains the base navigation components)
2018-03-11T00:13:25.364Z,1520727205.364 [Module Loader](DEBUG): Loading Module at Modules/Sample.so
2018-03-11T00:13:25.393Z,1520727205.393 [Module Loader](DEBUG): Loaded Module: Sample (This is a Sample Module of Sample Components)
2018-03-11T00:13:25.394Z,1520727205.394 [Module Loader](DEBUG): Loading Module at Modules/Science.so
2018-03-11T00:13:25.647Z,1520727205.647 [Aanderaa_O2] Loaded
2018-03-11T00:13:25.648Z,1520727205.648 [ComponentRegistry](DEBUG): SyncComponent "Aanderaa_O2" handled in the control thread.
2018-03-11T00:13:25.698Z,1520727205.698 [CTD_Seabird] Loaded
2018-03-11T00:13:25.698Z,1520727205.698 [ComponentRegistry](DEBUG): Component "CTD_Seabird" handled in its own thread.
2018-03-11T00:13:25.700Z,1520727205.700 [CTD_Seabird ThreadHandler](DEBUG): Created PCaller Thread at 406D04E0
2018-03-11T00:13:25.701Z,1520727205.701 [CTD_Seabird ThreadHandler](INFO): Protected caller Thread ID is 886
2018-03-11T00:13:25.721Z,1520727205.721 [ESPComponent] Loaded
2018-03-11T00:13:25.722Z,1520727205.722 [ComponentRegistry](DEBUG): SyncComponent "ESPComponent" handled in the control thread.
2018-03-11T00:13:25.735Z,1520727205.735 [PAR_Licor] Loaded
2018-03-11T00:13:25.736Z,1520727205.736 [ComponentRegistry](DEBUG): SyncComponent "PAR_Licor" handled in the control thread.
2018-03-11T00:13:25.782Z,1520727205.782 [WetLabsBB2FL] Loaded
2018-03-11T00:13:25.783Z,1520727205.783 [ComponentRegistry](DEBUG): Component "WetLabsBB2FL" handled in its own thread.
2018-03-11T00:13:25.785Z,1520727205.785 [WetLabsBB2FL ThreadHandler](DEBUG): Created PCaller Thread at 407004E0
2018-03-11T00:13:25.785Z,1520727205.785 [WetLabsBB2FL ThreadHandler](INFO): Protected caller Thread ID is 887
2018-03-11T00:13:25.786Z,1520727205.786 [Module Loader](DEBUG): Loaded Module: Science (Contains the science components)
2018-03-11T00:13:25.786Z,1520727205.786 [Module Loader](DEBUG): Loading Module at Modules/Sensor.so
2018-03-11T00:13:26.418Z,1520727206.418 [DataOverHttps] Loaded
2018-03-11T00:13:26.419Z,1520727206.419 [ComponentRegistry](DEBUG): SyncComponent "DataOverHttps" handled in the control thread.
2018-03-11T00:13:26.431Z,1520727206.431 [Depth_Keller] Loaded
2018-03-11T00:13:26.432Z,1520727206.432 [ComponentRegistry](DEBUG): SyncComponent "Depth_Keller" handled in the control thread.
2018-03-11T00:13:26.436Z,1520727206.436 [DropWeight] Loaded
2018-03-11T00:13:26.437Z,1520727206.437 [ComponentRegistry](DEBUG): SyncComponent "DropWeight" handled in the control thread.
2018-03-11T00:13:26.523Z,1520727206.523 [NAL9602] Loaded
2018-03-11T00:13:26.523Z,1520727206.523 [ComponentRegistry](DEBUG): SyncComponent "NAL9602" handled in the control thread.
2018-03-11T00:13:26.528Z,1520727206.528 [Onboard] Loaded
2018-03-11T00:13:26.528Z,1520727206.528 [ComponentRegistry](DEBUG): SyncComponent "Onboard" handled in the control thread.
2018-03-11T00:13:26.535Z,1520727206.535 [Radio_Surface] Loaded
2018-03-11T00:13:26.536Z,1520727206.536 [ComponentRegistry](DEBUG): Component "Radio_Surface" handled in its own thread.
2018-03-11T00:13:26.537Z,1520727206.537 [Radio_Surface ThreadHandler](DEBUG): Created PCaller Thread at 409464E0
2018-03-11T00:13:26.537Z,1520727206.537 [Radio_Surface ThreadHandler](INFO): Protected caller Thread ID is 888
2018-03-11T00:13:26.667Z,1520727206.667 [DAT] Loaded
2018-03-11T00:13:26.667Z,1520727206.667 [ComponentRegistry](DEBUG): SyncComponent "DAT" handled in the control thread.
2018-03-11T00:13:26.864Z,1520727206.864 [PNI_TCM] Loaded
2018-03-11T00:13:26.865Z,1520727206.865 [ComponentRegistry](DEBUG): SyncComponent "PNI_TCM" handled in the control thread.
2018-03-11T00:13:28.666Z,1520727208.666 [BPC1] Loaded
2018-03-11T00:13:28.666Z,1520727208.666 [ComponentRegistry](DEBUG): SyncComponent "BPC1" handled in the control thread.
2018-03-11T00:13:28.666Z,1520727208.666 [Module Loader](DEBUG): Loaded Module: Sensor (Contains the sensor components)
2018-03-11T00:13:28.667Z,1520727208.667 [Module Loader](DEBUG): Loading Module at Modules/Servo.so
2018-03-11T00:13:32.124Z,1520727212.124 [BuoyancyServo] Loaded
2018-03-11T00:13:32.124Z,1520727212.124 [ComponentRegistry](DEBUG): SyncComponent "BuoyancyServo" handled in the control thread.
2018-03-11T00:13:32.139Z,1520727212.139 [ElevatorServo] Loaded
2018-03-11T00:13:32.139Z,1520727212.139 [ComponentRegistry](DEBUG): SyncComponent "ElevatorServo" handled in the control thread.
2018-03-11T00:13:32.150Z,1520727212.150 [MassServo] Loaded
2018-03-11T00:13:32.150Z,1520727212.150 [ComponentRegistry](DEBUG): SyncComponent "MassServo" handled in the control thread.
2018-03-11T00:13:32.161Z,1520727212.161 [RudderServo] Loaded
2018-03-11T00:13:32.161Z,1520727212.161 [ComponentRegistry](DEBUG): SyncComponent "RudderServo" handled in the control thread.
2018-03-11T00:13:32.172Z,1520727212.172 [ThrusterServo] Loaded
2018-03-11T00:13:32.172Z,1520727212.172 [ComponentRegistry](DEBUG): SyncComponent "ThrusterServo" handled in the control thread.
2018-03-11T00:13:32.173Z,1520727212.173 [Module Loader](DEBUG): Loaded Module: Servo (This is the module containing motor controllers)
2018-03-11T00:13:32.176Z,1520727212.176 [Module Loader](DEBUG): Loading Module at Modules/Simulator.so
2018-03-11T00:13:32.320Z,1520727212.320 [Module Loader](DEBUG): Loaded Module: Simulator (This is the module containing the Simulator)
2018-03-11T00:13:32.321Z,1520727212.321 [Module Loader](DEBUG): Loading Module at Modules/Trigger.so
2018-03-11T00:13:32.366Z,1520727212.366 [Module Loader](DEBUG): Loaded Module: Trigger (Contains triggers for use in missions)
2018-03-11T00:13:32.369Z,1520727212.369 [ComponentRegistry](DEBUG): SyncComponent "MissionManager" handled in the control thread.
2018-03-11T00:13:32.370Z,1520727212.370 [ComponentRegistry](DEBUG): SyncComponent "Reporter" handled in the control thread.
2018-03-11T00:13:32.376Z,1520727212.376 [ComponentRegistry](DEBUG): Component "NavChartDb" handled in its own thread.
2018-03-11T00:13:32.378Z,1520727212.378 [NavChartDb ThreadHandler](DEBUG): Created PCaller Thread at 409ED4E0
2018-03-11T00:13:32.379Z,1520727212.379 [NavChartDb ThreadHandler](INFO): Protected caller Thread ID is 889
2018-03-11T00:13:32.385Z,1520727212.385 [Supervisor](INFO): Main Thread ID is 796
2018-03-11T00:13:32.385Z,1520727212.385 [Supervisor](DEBUG): Running supervisor.
2018-03-11T00:13:32.386Z,1520727212.386 [CommandLine ThreadHandler](INFO): Handler Thread ID is 890
2018-03-11T00:13:32.389Z,1520727212.389 [controlThread ThreadHandler](INFO): Handler Thread ID is 891
2018-03-11T00:13:32.390Z,1520727212.390 [controlThread](DEBUG): Initializing ControlThread
2018-03-11T00:13:32.390Z,1520727212.390 [SBIT](INFO): Initialize SBIT Component.
2018-03-11T00:13:32.391Z,1520727212.391 [SBIT](IMPORTANT): git: 2018-03-09
2018-03-11T00:13:32.391Z,1520727212.391 [SBIT](INFO): git hash: f0ec76a23ddb5e11d3d70ba61c7d67c0356dd1ec
2018-03-11T00:13:32.391Z,1520727212.391 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8
2018-03-11T00:13:32.392Z,1520727212.392 [SBIT](INFO): Kernel Reporting Different Version From Configuration.
Kernel Expected: #639 PREEMPT Wed Mar 12 12:53:33 PDT 2014
Kernel Reported: #2 PREEMPT Thu Jan 11 20:13:48 PST 2018
2018-03-11T00:13:32.394Z,1520727212.394 [SBIT](INFO): Beginning SBIT in 72.000000 seconds.
2018-03-11T00:13:32.394Z,1520727212.394 [IBIT](INFO): Initialize IBIT Component.
2018-03-11T00:13:32.395Z,1520727212.395 [CBIT](DEBUG): Initialize CBIT Component.
2018-03-11T00:13:32.395Z,1520727212.395 [CBIT](INFO): Last reboot was NOT due to watchdog timer.
2018-03-11T00:13:32.397Z,1520727212.397 [logger ThreadHandler](INFO): Handler Thread ID is 892
2018-03-11T00:13:32.441Z,1520727212.441 [CTD_Seabird ThreadHandler](INFO): Handler Thread ID is 893
2018-03-11T00:13:32.442Z,1520727212.442 [CTD_Seabird](INFO): Initializing
2018-03-11T00:13:32.442Z,1520727212.442 [CTD_Seabird](INFO): Checking LCM
2018-03-11T00:13:32.618Z,1520727212.618 [WetLabsBB2FL ThreadHandler](INFO): Handler Thread ID is 894
2018-03-11T00:13:32.619Z,1520727212.619 [WetLabsBB2FL](INFO): Powering down
2018-03-11T00:13:32.629Z,1520727212.629 [VerticalControl](DEBUG): Initialize VerticalControlComponent.
2018-03-11T00:13:32.631Z,1520727212.631 [HorizontalControl](DEBUG): Initialize HorizontalControlComponent.
2018-03-11T00:13:32.631Z,1520727212.631 [SpeedControl](DEBUG): Initialize SpeedControlComponent.
2018-03-11T00:13:32.632Z,1520727212.632 [LoopControl](DEBUG): Initialize LoopControlComponent.
2018-03-11T00:13:32.632Z,1520727212.632 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2018-03-11T00:13:32.632Z,1520727212.632 [PitchRateCalculator](DEBUG): Initializing PitchRateCalculator.
2018-03-11T00:13:32.633Z,1520727212.633 [SpeedCalculator](DEBUG): Initializing SpeedCalculator.
2018-03-11T00:13:32.633Z,1520727212.633 [TempGradientCalculator](DEBUG): Initializing TempGradientCalculator.
2018-03-11T00:13:32.634Z,1520727212.634 [VerticalTemperatureHomogeneityIndexCalculator](DEBUG): (re)initializing
2018-03-11T00:13:32.634Z,1520727212.634 [YawRateCalculator](DEBUG): Initializing YawRateCalculator.
2018-03-11T00:13:32.635Z,1520727212.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-11T00:13:32.636Z,1520727212.636 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T00:13:32.636Z,1520727212.636 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T00:13:32.636Z,1520727212.636 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-11T00:13:32.637Z,1520727212.637 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T00:13:32.637Z,1520727212.637 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T00:13:32.638Z,1520727212.638 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T00:13:32.638Z,1520727212.638 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T00:13:32.638Z,1520727212.638 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T00:13:32.639Z,1520727212.639 [NavChart](DEBUG): Initialize NavChart Navigation.
2018-03-11T00:13:32.639Z,1520727212.639 [UniversalFixResidualReporter](DEBUG): Initializing UniversalFixResidualReporter component.
2018-03-11T00:13:32.659Z,1520727212.659 [Radio_Surface ThreadHandler](INFO): Handler Thread ID is 895
2018-03-11T00:13:32.669Z,1520727212.669 [Radio_Surface](INFO): Powering up
2018-03-11T00:13:32.673Z,1520727212.673 [MissionManager](INFO): Loading Mission: Missions/Startup.xml
2018-03-11T00:13:32.809Z,1520727212.809 [NavChartDb ThreadHandler](INFO): Handler Thread ID is 896
2018-03-11T00:13:32.815Z,1520727212.815 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US2HA05M.000
2018-03-11T00:13:32.815Z,1520727212.815 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US2HA05M.000
2018-03-11T00:13:32.815Z,1520727212.815 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US3HA20M.000
2018-03-11T00:13:32.815Z,1520727212.815 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US3HA20M.000
2018-03-11T00:13:32.816Z,1520727212.816 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US4HA51M.000
2018-03-11T00:13:32.816Z,1520727212.816 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US4HA51M.000
2018-03-11T00:13:32.816Z,1520727212.816 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US4HA51M.000
2018-03-11T00:13:32.816Z,1520727212.816 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US4HA51M.000
2018-03-11T00:13:32.816Z,1520727212.816 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5HA53M.000
2018-03-11T00:13:32.816Z,1520727212.816 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5HA53M.000
2018-03-11T00:13:32.817Z,1520727212.817 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5HA55M.000
2018-03-11T00:13:32.817Z,1520727212.817 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5HA55M.000
2018-03-11T00:13:32.964Z,1520727212.964 [Startup:A.GoToSurface](DEBUG): Construct GoToSurface.
2018-03-11T00:13:32.975Z,1520727212.975 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
       xmlns:Control="Tethys/Control"
       xmlns:Guidance="Tethys/Guidance" 
       xmlns:Units="Tethys/Units"
       xmlns:Universal="Tethys/Universal"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
                           Tethys/Control http://okeanids.mbari.org/tethys/Xml/Control.xsd
                           Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
                           Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
                           Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
       Id="Startup">

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="StartupSatComms">

        <Sequence/>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:latitude_fix/>
        </ReadDatum>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:platform_communications/>
        </ReadDatum>

    </Aggregate>

</Mission>


2018-03-11T00:13:32.975Z,1520727212.975 [MissionManager](INFO): Loading Mission: Missions/Default.xml
2018-03-11T00:13:33.121Z,1520727213.121 [MissionManager](INFO): DefineArg Default.ElapsedSinceDefaultStarted = 0.000000 min
2018-03-11T00:13:33.123Z,1520727213.123 [Default:A.Wait](DEBUG): Construct Wait.
2018-03-11T00:13:33.125Z,1520727213.125 [Default:B.GoToSurface](DEBUG): Construct GoToSurface.
2018-03-11T00:13:33.132Z,1520727213.132 [CTD_Seabird](INFO): LCM OK
2018-03-11T00:13:33.132Z,1520727213.132 [CTD_Seabird](INFO): Powering up
2018-03-11T00:13:33.159Z,1520727213.159 [Default:CheckIn:Read_Iridium:A_Timeout:A.Execute](DEBUG): Construct Execute.
2018-03-11T00:13:33.190Z,1520727213.190 [Default:CheckIn:C.Wait](DEBUG): Construct Wait.
2018-03-11T00:13:33.195Z,1520727213.195 [Default:E.Execute](DEBUG): Construct Execute.
2018-03-11T00:13:33.215Z,1520727213.215 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
xmlns:Guidance="Tethys/Guidance"
xmlns:Units="Tethys/Units"
xmlns:Universal="Tethys/Universal"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
Id="Default">

    <DefineArg Name="ElapsedSinceDefaultStarted"><Units:minute/><Value>0</Value></DefineArg>

    <Guidance:Wait>
        <Sequence/>
        <Description>
            Wait a moment to see if the scheduler starts a new mission before
            starting to actually run Default.
        </Description>
        <Setting><Guidance:Wait.duration/><Units:second/><Value>13</Value></Setting>
    </Guidance:Wait>

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="CheckIn">

        <Sequence Repeat="288"/>

        <ReadDatum Id="Read_GPS">
            <Sequence/>
            <Timeout Duration="P5M"/>
            <Universal:time_fix/>
        </ReadDatum>

        <ReadDatum Id="Read_Iridium">
            <Sequence/>
            <Timeout Duration="P2H">
                <Guidance:Execute>
                    <Sequence/>
                    <Setting><Guidance:Execute.command/><String>Burn 300</String></Setting>
                </Guidance:Execute>
                <Syslog Severity="Critical">Dropped weight due to communications timeout.</Syslog>
            </Timeout>
            <Universal:platform_communications/>
        </ReadDatum>

        <Guidance:Wait>
            <Sequence/>
            <Setting><Guidance:Wait.duration/><Units:minute/><Value>5</Value></Setting>
        </Guidance:Wait>

        <Assign><Sequence/><Arg Name="ElapsedSinceDefaultStarted"/><Elapsed><Universal:mission_started/></Elapsed></Assign>

        <Syslog Severity="Important">Default mission has been running for <Arg Name="ElapsedSinceDefaultStarted"/><Units:minute/></Syslog>

    </Aggregate>

    <Syslog Severity="Important">Restarting logs and Default mission.</Syslog>

    <Guidance:Execute>
        <Sequence/>
        <Setting><Guidance:Execute.command/><String>restart logs</String></Setting>
    </Guidance:Execute>

</Mission>


2018-03-11T00:13:33.220Z,1520727213.220 [controlThread](DEBUG): Component order: CycleStarter,Aanderaa_O2,ESPComponent,PAR_Licor,DataOverHttps,Depth_Keller,DropWeight,NAL9602,Onboard,DAT,PNI_TCM,BPC1,PAR_Licor,Depth_Keller,DepthRateCalculator,PitchRateCalculator,SpeedCalculator,TempGradientCalculator,VerticalTemperatureHomogeneityIndexCalculator,YawRateCalculator,StratificationFrontDetector,DeadReckonUsingMultipleVelocitySources,DeadReckonUsingSpeedCalculator,DeadReckonWithRespectToSeafloor,NavChart,UniversalFixResidualReporter,MissionManager,VerticalControl,HorizontalControl,SpeedControl,LoopControl,BuoyancyServo,ElevatorServo,MassServo,RudderServo,ThrusterServo,SBIT,IBIT,CBIT,Reporter,LogSplitter,
2018-03-11T00:13:33.255Z,1520727213.255 [ESPComponent](INFO): powering down ESP
2018-03-11T00:13:33.428Z,1520727213.428 [DataOverHttps](DEBUG): dashIP=134.89.2.23 starts with a digit so assuming it is a numeric IP
2018-03-11T00:13:33.466Z,1520727213.466 [Depth_Keller](ERROR): Pressure reading out of range: 1727.332275 decibar
2018-03-11T00:13:33.549Z,1520727213.549 [DAT](INFO): Powering up
2018-03-11T00:13:33.549Z,1520727213.549 [DAT](DEBUG): Initializing DAT.
2018-03-11T00:13:33.672Z,1520727213.672 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-03-11T00:13:33.773Z,1520727213.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-03-11T00:13:33.774Z,1520727213.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-03-11T00:13:33.870Z,1520727213.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:33.883Z,1520727213.883 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-03-11T00:13:33.913Z,1520727213.913 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-03-11T00:13:34.022Z,1520727214.022 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2018-03-11T00:13:34.029Z,1520727214.029 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2018-03-11T00:13:34.035Z,1520727214.035 [ElevatorServo](DEBUG): Initializing EZServoServo.
2018-03-11T00:13:34.041Z,1520727214.041 [ElevatorServo](DEBUG): Initializing ElevatorServo.
2018-03-11T00:13:34.063Z,1520727214.063 [MassServo](DEBUG): Initializing EZServoServo.
2018-03-11T00:13:34.069Z,1520727214.069 [MassServo](DEBUG): Initializing MassServo.
2018-03-11T00:13:34.090Z,1520727214.090 [RudderServo](DEBUG): Initializing EZServoServo.
2018-03-11T00:13:34.097Z,1520727214.097 [RudderServo](DEBUG): Initializing RudderServo.
2018-03-11T00:13:34.103Z,1520727214.103 [ThrusterServo](DEBUG): Initializing EZServoServo.
2018-03-11T00:13:34.109Z,1520727214.109 [ThrusterServo](DEBUG): Initializing ThrusterServo.
2018-03-11T00:13:34.538Z,1520727214.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-03-11T00:13:34.538Z,1520727214.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-03-11T00:13:34.540Z,1520727214.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:34.541Z,1520727214.541 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-03-11T00:13:34.549Z,1520727214.549 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-03-11T00:13:34.881Z,1520727214.881 [BuoyancyServo](ERROR): Buoyancy initialization uart error serial timeout
2018-03-11T00:13:34.881Z,1520727214.881 [BuoyancyServo](FAULT): Buoyancy failed to initialize
2018-03-11T00:13:34.881Z,1520727214.881 [BuoyancyServo] Communications Fault, FailCount= 1
2018-03-11T00:13:34.881Z,1520727214.881 [BuoyancyServo](ERROR): Communications Fault
2018-03-11T00:13:35.093Z,1520727215.093 [CBIT](ERROR): Communications Fault in component: BuoyancyServo
2018-03-11T00:13:35.179Z,1520727215.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-03-11T00:13:35.180Z,1520727215.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-03-11T00:13:35.201Z,1520727215.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:35.201Z,1520727215.201 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-03-11T00:13:35.202Z,1520727215.202 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-03-11T00:13:35.208Z,1520727215.208 [BuoyancyServo](DEBUG): Uninitialize Buoyancy Servo.
2018-03-11T00:13:35.209Z,1520727215.209 [BuoyancyServo](INFO): Powering down
2018-03-11T00:13:35.556Z,1520727215.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-03-11T00:13:35.556Z,1520727215.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-03-11T00:13:35.558Z,1520727215.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:35.559Z,1520727215.559 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-03-11T00:13:35.559Z,1520727215.559 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-03-11T00:13:35.945Z,1520727215.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-03-11T00:13:35.946Z,1520727215.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-03-11T00:13:35.947Z,1520727215.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:35.947Z,1520727215.947 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-03-11T00:13:35.948Z,1520727215.948 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-03-11T00:13:36.417Z,1520727216.417 [Aanderaa_O2](INFO): Powering down
2018-03-11T00:13:36.533Z,1520727216.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-03-11T00:13:36.533Z,1520727216.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-03-11T00:13:36.534Z,1520727216.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:36.534Z,1520727216.534 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-03-11T00:13:36.535Z,1520727216.535 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-03-11T00:13:36.780Z,1520727216.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-03-11T00:13:36.780Z,1520727216.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-03-11T00:13:36.781Z,1520727216.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:36.789Z,1520727216.789 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-03-11T00:13:36.790Z,1520727216.790 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-03-11T00:13:37.212Z,1520727217.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-03-11T00:13:37.221Z,1520727217.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:37.282Z,1520727217.282 [CBIT](INFO): Clearing failed state for component BuoyancyServo
2018-03-11T00:13:37.282Z,1520727217.282 [BuoyancyServo] No Fault, FailCount= 1
2018-03-11T00:13:37.612Z,1520727217.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-03-11T00:13:37.614Z,1520727217.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:37.643Z,1520727217.643 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2018-03-11T00:13:37.644Z,1520727217.644 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2018-03-11T00:13:37.870Z,1520727217.870 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface
2018-03-11T00:13:38.016Z,1520727218.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-03-11T00:13:38.026Z,1520727218.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:38.040Z,1520727218.040 [CTD_Seabird](INFO): Started Seabird LCM interface with command:nohup ./lrauv-framework/onboard/bin/gpctd -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyC6 -b 9600 >& /dev/null &
2018-03-11T00:13:38.211Z,1520727218.211 [CTD_Seabird](INFO): LCM subscribed to channel:ctd_t.seabird-gpctd
2018-03-11T00:13:38.452Z,1520727218.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:38.604Z,1520727218.604 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface
2018-03-11T00:13:38.604Z,1520727218.604 [CTD_Seabird](INFO): Powering down
2018-03-11T00:13:38.778Z,1520727218.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:39.273Z,1520727219.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:39.630Z,1520727219.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:40.016Z,1520727220.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:40.462Z,1520727220.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:40.810Z,1520727220.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:41.184Z,1520727221.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:41.609Z,1520727221.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:42.014Z,1520727222.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:42.403Z,1520727222.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:42.783Z,1520727222.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:43.175Z,1520727223.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:43.599Z,1520727223.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:43.971Z,1520727223.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:44.391Z,1520727224.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:44.830Z,1520727224.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:45.199Z,1520727225.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:45.617Z,1520727225.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:45.971Z,1520727225.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:46.382Z,1520727226.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:46.792Z,1520727226.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:47.147Z,1520727227.147 [DAT](INFO): setting local address to 1
2018-03-11T00:13:47.214Z,1520727227.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:47.547Z,1520727227.547 [DAT](INFO): set local address to 1
2018-03-11T00:13:47.609Z,1520727227.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:47.975Z,1520727227.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:48.375Z,1520727228.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:48.858Z,1520727228.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:49.195Z,1520727229.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:49.587Z,1520727229.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:50.035Z,1520727230.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:50.390Z,1520727230.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:50.775Z,1520727230.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:51.211Z,1520727231.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:51.597Z,1520727231.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:51.987Z,1520727231.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:52.418Z,1520727232.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:52.846Z,1520727232.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:53.197Z,1520727233.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:53.575Z,1520727233.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:53.983Z,1520727233.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:54.379Z,1520727234.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:54.770Z,1520727234.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:55.200Z,1520727235.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:55.595Z,1520727235.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:55.978Z,1520727235.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:56.404Z,1520727236.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:56.731Z,1520727236.731 [NAL9602](INFO): Powering up NAL9602
2018-03-11T00:13:56.786Z,1520727236.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:57.220Z,1520727237.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:57.608Z,1520727237.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:57.996Z,1520727237.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:58.384Z,1520727238.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:58.785Z,1520727238.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:59.190Z,1520727239.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:59.577Z,1520727239.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:13:59.985Z,1520727239.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:00.383Z,1520727240.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:00.792Z,1520727240.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:01.241Z,1520727241.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:01.702Z,1520727241.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:02.071Z,1520727242.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:02.577Z,1520727242.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:02.988Z,1520727242.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:03.468Z,1520727243.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:03.809Z,1520727243.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:04.062Z,1520727244.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:04.440Z,1520727244.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:04.842Z,1520727244.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:05.243Z,1520727245.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:05.642Z,1520727245.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:06.093Z,1520727246.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:06.423Z,1520727246.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:06.834Z,1520727246.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:07.237Z,1520727247.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:07.595Z,1520727247.595 [NAL9602](INFO): NAL9602 initialized
2018-03-11T00:14:07.631Z,1520727247.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:08.067Z,1520727248.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:08.443Z,1520727248.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:08.912Z,1520727248.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:09.271Z,1520727249.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:09.644Z,1520727249.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:10.099Z,1520727250.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:10.462Z,1520727250.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:10.920Z,1520727250.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:11.522Z,1520727251.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:11.901Z,1520727251.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:12.335Z,1520727252.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:12.791Z,1520727252.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:13.018Z,1520727253.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:13.668Z,1520727253.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:14.010Z,1520727254.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:14.443Z,1520727254.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:14.745Z,1520727254.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:15.115Z,1520727255.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:15.522Z,1520727255.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:15.931Z,1520727255.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:16.348Z,1520727256.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:16.723Z,1520727256.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:17.240Z,1520727257.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:17.530Z,1520727257.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:17.950Z,1520727257.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:18.353Z,1520727258.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:18.727Z,1520727258.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:19.126Z,1520727259.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:19.504Z,1520727259.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:19.901Z,1520727259.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:20.311Z,1520727260.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:20.711Z,1520727260.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:21.104Z,1520727261.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:21.537Z,1520727261.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:21.941Z,1520727261.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:22.369Z,1520727262.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:22.719Z,1520727262.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:23.142Z,1520727263.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:23.538Z,1520727263.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:23.924Z,1520727263.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:24.335Z,1520727264.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:24.746Z,1520727264.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:25.095Z,1520727265.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:25.490Z,1520727265.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:25.923Z,1520727265.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:26.322Z,1520727266.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:26.698Z,1520727266.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:27.092Z,1520727267.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:27.499Z,1520727267.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:27.891Z,1520727267.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:28.295Z,1520727268.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:28.699Z,1520727268.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:29.095Z,1520727269.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:29.503Z,1520727269.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:29.923Z,1520727269.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:30.299Z,1520727270.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:30.695Z,1520727270.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:31.126Z,1520727271.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:31.508Z,1520727271.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:31.899Z,1520727271.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:32.307Z,1520727272.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:32.703Z,1520727272.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:33.103Z,1520727273.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:33.499Z,1520727273.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:33.900Z,1520727273.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:34.302Z,1520727274.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:34.726Z,1520727274.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:35.098Z,1520727275.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:35.499Z,1520727275.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:35.906Z,1520727275.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:36.311Z,1520727276.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:36.703Z,1520727276.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:37.098Z,1520727277.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:37.499Z,1520727277.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:37.903Z,1520727277.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:38.301Z,1520727278.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:38.699Z,1520727278.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:39.102Z,1520727279.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:39.512Z,1520727279.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:39.912Z,1520727279.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:40.307Z,1520727280.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:40.712Z,1520727280.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:41.112Z,1520727281.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:41.495Z,1520727281.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:41.899Z,1520727281.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:42.306Z,1520727282.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:42.707Z,1520727282.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:43.107Z,1520727283.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:43.504Z,1520727283.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:43.903Z,1520727283.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:44.314Z,1520727284.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:44.703Z,1520727284.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:45.107Z,1520727285.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:45.116Z,1520727285.116 [SBIT](IMPORTANT): Beginning Startup BIT
2018-03-11T00:14:45.120Z,1520727285.120 [CBIT](IMPORTANT): Beginning ground fault scan
2018-03-11T00:14:45.507Z,1520727285.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:45.907Z,1520727285.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:46.307Z,1520727286.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:46.711Z,1520727286.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:47.132Z,1520727287.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:47.679Z,1520727287.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:48.091Z,1520727288.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:48.467Z,1520727288.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:48.911Z,1520727288.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:49.272Z,1520727289.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:49.664Z,1520727289.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:50.066Z,1520727290.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:50.464Z,1520727290.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:50.868Z,1520727290.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:51.266Z,1520727291.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:51.665Z,1520727291.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:52.068Z,1520727292.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:52.464Z,1520727292.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:52.872Z,1520727292.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:53.272Z,1520727293.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:53.648Z,1520727293.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:54.069Z,1520727294.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:54.465Z,1520727294.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:54.869Z,1520727294.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:55.268Z,1520727295.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:55.670Z,1520727295.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:56.048Z,1520727296.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:56.213Z,1520727296.213 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): -0.009941
CHAN A1 (24V): -0.013623
CHAN A2 (12V): 0.000084
CHAN A3 (5V): -0.001447
CHAN B0 (3.3V): 0.000658
CHAN B1 (3.15aV): 0.000213
CHAN B2 (3.15bV): -0.000251
CHAN B3 (GND): -0.000598
OPEN: 0.005053
Full Scale Calc: 4.765 mA, -1.589 mA
2018-03-11T00:14:56.468Z,1520727296.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:56.852Z,1520727296.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:57.255Z,1520727297.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:57.649Z,1520727297.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:58.058Z,1520727298.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:58.463Z,1520727298.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:58.851Z,1520727298.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:59.256Z,1520727299.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:14:59.675Z,1520727299.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:00.063Z,1520727300.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:00.456Z,1520727300.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:01.050Z,1520727301.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:01.463Z,1520727301.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:01.843Z,1520727301.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:02.240Z,1520727302.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:02.645Z,1520727302.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:03.051Z,1520727303.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:03.451Z,1520727303.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:03.841Z,1520727303.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:04.250Z,1520727304.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:04.596Z,1520727304.596 [NAL9602](INFO): SBD MO Status=2, MOMSN=5010, MT Status=2, MTMSN=0
2018-03-11T00:15:04.596Z,1520727304.596 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-11T00:15:04.636Z,1520727304.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:05.051Z,1520727305.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:05.452Z,1520727305.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:05.850Z,1520727305.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:06.232Z,1520727306.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:06.632Z,1520727306.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:07.051Z,1520727307.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:07.451Z,1520727307.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:07.853Z,1520727307.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:08.248Z,1520727308.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:08.651Z,1520727308.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:09.060Z,1520727309.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:09.447Z,1520727309.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:09.852Z,1520727309.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:10.254Z,1520727310.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:10.647Z,1520727310.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:11.044Z,1520727311.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:11.443Z,1520727311.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:11.851Z,1520727311.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:12.256Z,1520727312.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:12.679Z,1520727312.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:13.035Z,1520727313.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:13.464Z,1520727313.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:13.870Z,1520727313.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:14.235Z,1520727314.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:14.638Z,1520727314.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:15.039Z,1520727315.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:15.439Z,1520727315.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:15.839Z,1520727315.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:16.238Z,1520727316.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:16.635Z,1520727316.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:17.037Z,1520727317.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:17.437Z,1520727317.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:17.834Z,1520727317.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:18.239Z,1520727318.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:18.635Z,1520727318.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:19.062Z,1520727319.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:19.439Z,1520727319.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:19.804Z,1520727319.804 [NAL9602](INFO): SBD MO Status=0, MOMSN=5010, MT Status=0, MTMSN=0
2018-03-11T00:15:19.804Z,1520727319.804 [NAL9602](INFO): No messages in MT queue
2018-03-11T00:15:19.858Z,1520727319.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:20.240Z,1520727320.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:20.641Z,1520727320.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:21.071Z,1520727321.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:21.445Z,1520727321.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:21.838Z,1520727321.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:22.239Z,1520727322.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:22.642Z,1520727322.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:23.040Z,1520727323.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:23.473Z,1520727323.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:23.849Z,1520727323.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:24.273Z,1520727324.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:24.647Z,1520727324.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:25.059Z,1520727325.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:25.443Z,1520727325.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:25.851Z,1520727325.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:26.255Z,1520727326.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:26.655Z,1520727326.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:27.053Z,1520727327.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:27.452Z,1520727327.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:27.993Z,1520727327.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:28.379Z,1520727328.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:28.787Z,1520727328.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:29.166Z,1520727329.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:29.595Z,1520727329.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:29.990Z,1520727329.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:30.391Z,1520727330.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:30.797Z,1520727330.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:31.172Z,1520727331.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:31.568Z,1520727331.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:31.993Z,1520727331.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:32.396Z,1520727332.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:32.806Z,1520727332.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:33.199Z,1520727333.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:33.585Z,1520727333.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:33.990Z,1520727333.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:34.368Z,1520727334.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:34.775Z,1520727334.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:35.173Z,1520727335.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:35.597Z,1520727335.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:36.006Z,1520727336.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:36.382Z,1520727336.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:36.783Z,1520727336.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:37.186Z,1520727337.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:37.591Z,1520727337.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:37.983Z,1520727337.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:38.383Z,1520727338.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:38.814Z,1520727338.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:39.189Z,1520727339.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:39.218Z,1520727339.218 [SBIT](IMPORTANT): SBIT PASSED
2018-03-11T00:15:39.585Z,1520727339.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:39.588Z,1520727339.588 [MissionManager](IMPORTANT): Started mission Startup
2018-03-11T00:15:39.588Z,1520727339.588 [Startup] Running Loop=1
2018-03-11T00:15:39.589Z,1520727339.589 [Startup](DEBUG): Aggregate::initialize Startup
2018-03-11T00:15:39.589Z,1520727339.589 [Startup:A.GoToSurface] Running Loop=1
2018-03-11T00:15:39.589Z,1520727339.589 [Startup:A.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2018-03-11T00:15:39.590Z,1520727339.590 [Startup:A.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2018-03-11T00:15:39.590Z,1520727339.590 [Startup:A.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2018-03-11T00:15:39.590Z,1520727339.590 [Startup:A.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2018-03-11T00:15:39.591Z,1520727339.591 [Startup:A.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 30.000000 seconds.
2018-03-11T00:15:39.591Z,1520727339.591 [Startup:A.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2018-03-11T00:15:39.613Z,1520727339.613 [Startup:StartupSatComms] Running Loop=1
2018-03-11T00:15:39.613Z,1520727339.613 [Startup:StartupSatComms](DEBUG): Aggregate::initialize Startup:StartupSatComms
2018-03-11T00:15:39.614Z,1520727339.614 [Startup:StartupSatComms:A] Running Loop=1
2018-03-11T00:15:39.982Z,1520727339.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:39.987Z,1520727339.987 [Startup:StartupSatComms:A](DEBUG): Initialize ReadDataComponent to sense latitude_fix
2018-03-11T00:15:40.372Z,1520727340.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:40.783Z,1520727340.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:41.179Z,1520727341.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:41.589Z,1520727341.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:41.990Z,1520727341.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:42.389Z,1520727342.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:42.779Z,1520727342.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:43.177Z,1520727343.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:43.580Z,1520727343.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:43.987Z,1520727343.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:44.383Z,1520727344.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:44.795Z,1520727344.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:45.190Z,1520727345.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:45.588Z,1520727345.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:45.987Z,1520727345.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:46.377Z,1520727346.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:46.779Z,1520727346.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:47.190Z,1520727347.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:47.589Z,1520727347.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:47.988Z,1520727347.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:48.397Z,1520727348.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:48.814Z,1520727348.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:49.191Z,1520727349.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:49.586Z,1520727349.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:49.997Z,1520727349.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:50.382Z,1520727350.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:50.795Z,1520727350.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:51.224Z,1520727351.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:51.591Z,1520727351.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:51.983Z,1520727351.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:52.380Z,1520727352.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:52.780Z,1520727352.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:53.179Z,1520727353.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:53.592Z,1520727353.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:53.988Z,1520727353.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:54.385Z,1520727354.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:54.780Z,1520727354.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:55.186Z,1520727355.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:55.578Z,1520727355.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:55.983Z,1520727355.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:56.383Z,1520727356.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:56.793Z,1520727356.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:57.193Z,1520727357.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:57.588Z,1520727357.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:57.979Z,1520727357.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:58.384Z,1520727358.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:58.781Z,1520727358.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:59.178Z,1520727359.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:59.592Z,1520727359.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:15:59.996Z,1520727359.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:00.408Z,1520727360.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:00.780Z,1520727360.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:01.175Z,1520727361.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:01.606Z,1520727361.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:02.003Z,1520727362.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:02.379Z,1520727362.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:02.797Z,1520727362.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:03.202Z,1520727363.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:03.628Z,1520727363.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:03.987Z,1520727363.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:04.386Z,1520727364.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:04.789Z,1520727364.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:05.187Z,1520727365.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:05.589Z,1520727365.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:05.995Z,1520727365.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:06.393Z,1520727366.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:06.790Z,1520727366.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:07.185Z,1520727367.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:07.587Z,1520727367.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:07.988Z,1520727367.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:08.400Z,1520727368.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:08.795Z,1520727368.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:09.197Z,1520727369.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:09.599Z,1520727369.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:09.987Z,1520727369.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:10.385Z,1520727370.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:10.789Z,1520727370.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:11.170Z,1520727371.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:11.598Z,1520727371.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:11.992Z,1520727371.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:12.406Z,1520727372.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:12.775Z,1520727372.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:13.179Z,1520727373.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:13.572Z,1520727373.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:14.002Z,1520727374.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:14.411Z,1520727374.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:14.781Z,1520727374.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:15.181Z,1520727375.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:15.606Z,1520727375.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:15.989Z,1520727375.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:16.380Z,1520727376.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:16.779Z,1520727376.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:17.179Z,1520727377.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:17.584Z,1520727377.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:17.985Z,1520727377.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:18.380Z,1520727378.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:18.772Z,1520727378.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:19.181Z,1520727379.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:19.571Z,1520727379.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:19.975Z,1520727379.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:20.374Z,1520727380.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:20.785Z,1520727380.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:21.180Z,1520727381.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:21.587Z,1520727381.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:21.979Z,1520727381.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:22.382Z,1520727382.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:22.782Z,1520727382.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:23.179Z,1520727383.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:23.585Z,1520727383.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:23.988Z,1520727383.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:24.390Z,1520727384.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:24.780Z,1520727384.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:25.175Z,1520727385.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:25.584Z,1520727385.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:25.984Z,1520727385.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:26.385Z,1520727386.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:26.817Z,1520727386.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:27.189Z,1520727387.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:27.584Z,1520727387.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:28.010Z,1520727388.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:28.397Z,1520727388.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:28.786Z,1520727388.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:29.175Z,1520727389.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:29.582Z,1520727389.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:29.988Z,1520727389.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:30.391Z,1520727390.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:30.779Z,1520727390.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:31.175Z,1520727391.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:31.582Z,1520727391.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:31.986Z,1520727391.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:32.379Z,1520727392.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:32.795Z,1520727392.795 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:32.795Z,1520727392.795 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2018-03-11T00:16:32.795Z,1520727392.795 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-03-11T00:16:32.798Z,1520727392.798 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:32.798Z,1520727392.798 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2018-03-11T00:16:32.798Z,1520727392.798 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-11T00:16:32.834Z,1520727392.834 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:32.834Z,1520727392.834 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-03-11T00:16:32.834Z,1520727392.834 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T00:16:32.853Z,1520727392.853 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-03-11T00:16:32.854Z,1520727392.854 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-11T00:16:32.854Z,1520727392.854 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T00:16:33.199Z,1520727393.199 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-03-11T00:16:33.199Z,1520727393.199 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2018-03-11T00:16:33.200Z,1520727393.200 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-11T00:16:33.200Z,1520727393.200 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2018-03-11T00:16:33.200Z,1520727393.200 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T00:16:33.200Z,1520727393.200 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-03-11T00:16:33.595Z,1520727393.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-03-11T00:16:33.595Z,1520727393.595 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T00:16:33.596Z,1520727393.596 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T00:16:33.596Z,1520727393.596 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-11T00:16:33.596Z,1520727393.596 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T00:16:33.597Z,1520727393.597 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T00:16:33.597Z,1520727393.597 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T00:16:33.598Z,1520727393.598 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T00:16:33.598Z,1520727393.598 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T00:16:33.986Z,1520727393.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-03-11T00:16:33.987Z,1520727393.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:34.379Z,1520727394.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-03-11T00:16:34.380Z,1520727394.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:34.780Z,1520727394.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-03-11T00:16:34.781Z,1520727394.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:35.187Z,1520727395.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-03-11T00:16:35.188Z,1520727395.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:35.592Z,1520727395.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-03-11T00:16:35.592Z,1520727395.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:35.990Z,1520727395.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-03-11T00:16:35.990Z,1520727395.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:36.397Z,1520727396.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-03-11T00:16:36.398Z,1520727396.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:36.783Z,1520727396.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-03-11T00:16:36.784Z,1520727396.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:37.181Z,1520727397.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-03-11T00:16:37.182Z,1520727397.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:37.587Z,1520727397.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-03-11T00:16:37.588Z,1520727397.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:37.979Z,1520727397.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-03-11T00:16:37.980Z,1520727397.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:38.388Z,1520727398.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-03-11T00:16:38.389Z,1520727398.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:38.794Z,1520727398.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-03-11T00:16:38.795Z,1520727398.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:39.201Z,1520727399.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-03-11T00:16:39.202Z,1520727399.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:39.605Z,1520727399.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-03-11T00:16:39.606Z,1520727399.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:39.997Z,1520727399.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-03-11T00:16:39.998Z,1520727399.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:40.001Z,1520727400.001 [Startup:StartupSatComms:A](INFO): Timed out from 2018-03-11T00:15:39.6Z
2018-03-11T00:16:40.002Z,1520727400.002 [Startup:StartupSatComms:A] Stopped
2018-03-11T00:16:40.002Z,1520727400.002 [Startup:StartupSatComms:B] Running Loop=1
2018-03-11T00:16:40.391Z,1520727400.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-03-11T00:16:40.392Z,1520727400.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:40.395Z,1520727400.395 [Startup:StartupSatComms:B](DEBUG): Initialize ReadDataComponent to sense platform_communications
2018-03-11T00:16:40.796Z,1520727400.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-03-11T00:16:40.802Z,1520727400.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:41.227Z,1520727401.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-03-11T00:16:41.228Z,1520727401.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:41.602Z,1520727401.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-03-11T00:16:41.603Z,1520727401.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:41.998Z,1520727401.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-03-11T00:16:41.999Z,1520727401.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:42.376Z,1520727402.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-03-11T00:16:42.377Z,1520727402.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:42.775Z,1520727402.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-03-11T00:16:42.776Z,1520727402.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:43.176Z,1520727403.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-03-11T00:16:43.178Z,1520727403.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:43.574Z,1520727403.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-03-11T00:16:43.575Z,1520727403.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:43.975Z,1520727403.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-03-11T00:16:43.976Z,1520727403.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:44.378Z,1520727404.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-03-11T00:16:44.379Z,1520727404.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:44.782Z,1520727404.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-03-11T00:16:44.783Z,1520727404.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:45.180Z,1520727405.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-03-11T00:16:45.180Z,1520727405.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:45.574Z,1520727405.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-03-11T00:16:45.575Z,1520727405.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:45.974Z,1520727405.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-03-11T00:16:45.975Z,1520727405.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:46.378Z,1520727406.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-03-11T00:16:46.380Z,1520727406.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:46.778Z,1520727406.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-03-11T00:16:46.779Z,1520727406.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:47.194Z,1520727407.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-03-11T00:16:47.196Z,1520727407.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:47.875Z,1520727407.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s.
2018-03-11T00:16:47.876Z,1520727407.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:50.020Z,1520727410.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-03-11T00:16:50.021Z,1520727410.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:50.136Z,1520727410.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-03-11T00:16:50.137Z,1520727410.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:50.492Z,1520727410.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-03-11T00:16:50.494Z,1520727410.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:50.898Z,1520727410.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-03-11T00:16:50.899Z,1520727410.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:51.292Z,1520727411.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-03-11T00:16:51.293Z,1520727411.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:51.696Z,1520727411.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-03-11T00:16:51.697Z,1520727411.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:52.098Z,1520727412.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-03-11T00:16:52.099Z,1520727412.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:52.492Z,1520727412.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-03-11T00:16:52.493Z,1520727412.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:52.892Z,1520727412.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:53.297Z,1520727413.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:53.724Z,1520727413.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:54.091Z,1520727414.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:54.491Z,1520727414.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:54.894Z,1520727414.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:55.299Z,1520727415.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:55.698Z,1520727415.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:56.085Z,1520727416.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:56.490Z,1520727416.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:56.890Z,1520727416.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:57.298Z,1520727417.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:57.695Z,1520727417.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:58.052Z,1520727418.052 [NAL9602](INFO): SBD MO Status=1, MOMSN=5011, MT Status=0, MTMSN=0
2018-03-11T00:16:58.105Z,1520727418.105 [NAL9602](INFO): Sent 25 bytes from file Logs/20180310T184932/Courier0156.lzma
2018-03-11T00:16:58.105Z,1520727418.105 [NAL9602](INFO): Packets left to send: 0
2018-03-11T00:16:58.107Z,1520727418.107 [NAL9602](DEBUG): Stored copy of sent data in Logs/20180310T184932/Courier0156.lzma.parts/0000.sbd
2018-03-11T00:16:58.107Z,1520727418.107 [NAL9602](DEBUG): Completed sending Logs/20180310T184932/Courier0156.lzma
2018-03-11T00:16:58.158Z,1520727418.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:58.888Z,1520727418.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:16:59.038Z,1520727419.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:01.384Z,1520727421.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:01.527Z,1520727421.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:01.851Z,1520727421.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:02.270Z,1520727422.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:02.651Z,1520727422.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:03.051Z,1520727423.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:03.455Z,1520727423.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:03.857Z,1520727423.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:04.300Z,1520727424.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:04.699Z,1520727424.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:05.069Z,1520727425.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:05.505Z,1520727425.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:05.870Z,1520727425.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:06.266Z,1520727426.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:06.673Z,1520727426.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:07.073Z,1520727427.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:07.468Z,1520727427.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:07.875Z,1520727427.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:08.251Z,1520727428.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:08.656Z,1520727428.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:09.081Z,1520727429.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:09.490Z,1520727429.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:12.554Z,1520727432.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:12.702Z,1520727432.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:13.037Z,1520727433.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:13.420Z,1520727433.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:13.786Z,1520727433.786 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.003641
2018-03-11T00:17:13.827Z,1520727433.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:14.517Z,1520727434.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:14.655Z,1520727434.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:14.988Z,1520727434.988 [NAL9602](INFO): SBD MO Status=2, MOMSN=5012, MT Status=2, MTMSN=0
2018-03-11T00:17:14.988Z,1520727434.988 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-11T00:17:15.035Z,1520727435.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:18.136Z,1520727438.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:18.306Z,1520727438.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:18.617Z,1520727438.617 [DataOverHttps](INFO): Sending 128 bytes from file Logs/20180310T184932/Express0157.lzma
2018-03-11T00:17:18.681Z,1520727438.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:19.185Z,1520727439.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:19.399Z,1520727439.399 [DataOverHttps](INFO): Moved sent file to Logs/20180310T184932/Express0157.lzma.bak
2018-03-11T00:17:19.399Z,1520727439.399 [DataOverHttps](INFO): SBD MOMSN=8009949
2018-03-11T00:17:19.479Z,1520727439.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:20.246Z,1520727440.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:20.406Z,1520727440.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:24.359Z,1520727444.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:24.500Z,1520727444.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:24.855Z,1520727444.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:25.230Z,1520727445.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:25.651Z,1520727445.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:26.057Z,1520727446.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:26.435Z,1520727446.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:29.567Z,1520727449.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:29.708Z,1520727449.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:30.007Z,1520727450.007 [DataOverHttps](INFO): Sending 563 bytes from file Logs/20180311T001315/Express0001.lzma
2018-03-11T00:17:30.075Z,1520727450.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:30.466Z,1520727450.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:30.802Z,1520727450.802 [DataOverHttps](INFO): Moved sent file to Logs/20180311T001315/Express0001.lzma.bak
2018-03-11T00:17:30.803Z,1520727450.803 [DataOverHttps](INFO): SBD MOMSN=8009953
2018-03-11T00:17:30.875Z,1520727450.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:31.531Z,1520727451.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:31.534Z,1520727451.534 [Startup:StartupSatComms:B] Stopped
2018-03-11T00:17:31.534Z,1520727451.534 [Startup:StartupSatComms](INFO): Completed Startup:StartupSatComms
2018-03-11T00:17:31.534Z,1520727451.534 [Startup:StartupSatComms] Stopped
2018-03-11T00:17:31.534Z,1520727451.534 [Startup:StartupSatComms](DEBUG): Aggregate::uninitialize Startup:StartupSatComms
2018-03-11T00:17:31.535Z,1520727451.535 [Startup](INFO): Completed Startup
2018-03-11T00:17:31.535Z,1520727451.535 [MissionManager](INFO): Startup is completed.
2018-03-11T00:17:31.535Z,1520727451.535 [MissionManager](INFO): Uninitializing Mission Startup
2018-03-11T00:17:31.535Z,1520727451.535 [Startup] Stopped
2018-03-11T00:17:31.536Z,1520727451.536 [Startup](DEBUG): Aggregate::uninitialize Startup
2018-03-11T00:17:31.536Z,1520727451.536 [Startup:A.GoToSurface] Stopped
2018-03-11T00:17:31.536Z,1520727451.536 [Startup:A.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2018-03-11T00:17:31.673Z,1520727451.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:17:31.676Z,1520727451.676 [MissionManager](IMPORTANT): Started mission Default
2018-03-11T00:17:31.676Z,1520727451.676 [Default] Running Loop=1
2018-03-11T00:17:31.677Z,1520727451.677 [Default](DEBUG): Aggregate::initialize Default
2018-03-11T00:17:31.681Z,1520727451.681 [Default:B.GoToSurface] Running Loop=1
2018-03-11T00:17:31.681Z,1520727451.681 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2018-03-11T00:17:31.681Z,1520727451.681 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2018-03-11T00:17:31.682Z,1520727451.682 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2018-03-11T00:17:31.682Z,1520727451.682 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2018-03-11T00:17:31.682Z,1520727451.682 [Default:B.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 30.000000 seconds.
2018-03-11T00:17:31.682Z,1520727451.682 [Default:B.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2018-03-11T00:17:31.683Z,1520727451.683 [Default:A.Wait] Running Loop=1
2018-03-11T00:17:31.683Z,1520727451.683 [Default:A.Wait](DEBUG): Initialize Wait Component.
2018-03-11T00:17:32.026Z,1520727452.026 [NAL9602](INFO): GPS fix at 20180311T001729: (21.249957, -157.958621)
2018-03-11T00:17:44.737Z,1520727464.737 [Default:A.Wait](INFO): Done Waiting.
2018-03-11T00:17:44.741Z,1520727464.741 [Default:A.Wait] Stopped
2018-03-11T00:17:44.741Z,1520727464.741 [Default:A.Wait](DEBUG): Uninitialize Wait Component.
2018-03-11T00:17:45.140Z,1520727465.140 [Default:CheckIn] Running Loop=1
2018-03-11T00:17:45.140Z,1520727465.140 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-11T00:17:45.140Z,1520727465.140 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-11T00:17:45.528Z,1520727465.528 [Default:CheckIn:Read_GPS](DEBUG): Initialize ReadDataComponent to sense time_fix
2018-03-11T00:17:47.082Z,1520727467.082 [NAL9602](INFO): GPS fix at 20180311T001744: (21.249937, -157.959498)
2018-03-11T00:17:47.170Z,1520727467.170 [Default:CheckIn:Read_GPS] Stopped
2018-03-11T00:17:47.170Z,1520727467.170 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-11T00:17:47.560Z,1520727467.560 [Default:CheckIn:Read_Iridium](DEBUG): Initialize ReadDataComponent to sense platform_communications
2018-03-11T00:17:52.058Z,1520727472.058 [DataOverHttps](INFO): Sending 212 bytes from file Logs/20180311T001315/Courier0004.lzma
2018-03-11T00:17:52.848Z,1520727472.848 [DataOverHttps](INFO): Moved sent file to Logs/20180311T001315/Courier0004.lzma.bak
2018-03-11T00:17:52.848Z,1520727472.848 [DataOverHttps](INFO): SBD MOMSN=8009966
2018-03-11T00:18:05.361Z,1520727485.361 [DataOverHttps](INFO): Sending 232 bytes from file Logs/20180311T001315/Express0005.lzma
2018-03-11T00:18:09.777Z,1520727489.777 [DataOverHttps](INFO): Moved sent file to Logs/20180311T001315/Express0005.lzma.bak
2018-03-11T00:18:09.778Z,1520727489.778 [DataOverHttps](INFO): SBD MOMSN=8009969
2018-03-11T00:18:10.345Z,1520727490.345 [Default:CheckIn:Read_Iridium] Stopped
2018-03-11T00:18:10.345Z,1520727490.345 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-11T00:18:10.345Z,1520727490.345 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-11T00:18:21.686Z,1520727501.686 [NAL9602](INFO): Powering down
2018-03-11T00:19:33.913Z,1520727573.913 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:19:33.913Z,1520727573.913 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-03-11T00:19:33.913Z,1520727573.913 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T00:19:33.925Z,1520727573.925 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T00:19:34.355Z,1520727574.355 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T00:19:34.355Z,1520727574.355 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-03-11T00:19:34.700Z,1520727574.700 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T00:19:34.701Z,1520727574.701 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T00:19:34.701Z,1520727574.701 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T00:22:34.802Z,1520727754.802 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:22:34.802Z,1520727754.802 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-03-11T00:22:34.802Z,1520727754.802 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T00:22:34.835Z,1520727754.835 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T00:22:35.252Z,1520727755.252 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T00:22:35.252Z,1520727755.252 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-03-11T00:22:35.597Z,1520727755.597 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T00:22:35.598Z,1520727755.598 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T00:22:35.598Z,1520727755.598 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T00:23:10.795Z,1520727790.795 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-11T00:23:10.795Z,1520727790.795 [Default:CheckIn:C.Wait] Stopped
2018-03-11T00:23:10.795Z,1520727790.795 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-11T00:23:10.795Z,1520727790.795 [Default:CheckIn:D] Running Loop=1
2018-03-11T00:23:11.242Z,1520727791.242 [Default:CheckIn:D] Stopped
2018-03-11T00:23:11.242Z,1520727791.242 [Default:CheckIn:E] Running Loop=1
2018-03-11T00:23:11.591Z,1520727791.591 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 5.659319 min 
2018-03-11T00:23:11.594Z,1520727791.594 [Default:CheckIn:E] Stopped
2018-03-11T00:23:11.594Z,1520727791.594 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-11T00:23:11.594Z,1520727791.594 [Default:CheckIn] Stopped
2018-03-11T00:23:11.594Z,1520727791.594 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-11T00:23:11.594Z,1520727791.594 [Default:CheckIn](INFO): Running loop #2
2018-03-11T00:23:11.595Z,1520727791.595 [Default:CheckIn] Running Loop=2
2018-03-11T00:23:11.595Z,1520727791.595 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-11T00:23:11.595Z,1520727791.595 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-11T00:23:14.948Z,1520727794.948 [NAL9602](INFO): Powering up
2018-03-11T00:23:26.098Z,1520727806.098 [NAL9602](INFO): NAL9602 initialized
2018-03-11T00:23:32.549Z,1520727812.549 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-11T00:24:02.116Z,1520727842.116 [NAL9602](INFO): SBD MO Status=2, MOMSN=5012, MT Status=2, MTMSN=0
2018-03-11T00:24:02.117Z,1520727842.117 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-11T00:24:21.872Z,1520727861.872 [NAL9602](INFO): SBD MO Status=2, MOMSN=5012, MT Status=2, MTMSN=0
2018-03-11T00:24:21.872Z,1520727861.872 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-11T00:24:28.671Z,1520727868.671 [NAL9602](INFO): SBD MO Status=0, MOMSN=5012, MT Status=0, MTMSN=0
2018-03-11T00:24:28.671Z,1520727868.671 [NAL9602](INFO): No messages in MT queue
2018-03-11T00:25:35.698Z,1520727935.698 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:25:35.698Z,1520727935.698 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-03-11T00:25:35.698Z,1520727935.698 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T00:25:35.721Z,1520727935.721 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T00:25:36.167Z,1520727936.167 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T00:25:36.167Z,1520727936.167 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-03-11T00:25:36.501Z,1520727936.501 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T00:25:36.501Z,1520727936.501 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T00:25:36.502Z,1520727936.502 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T00:26:30.110Z,1520727990.110 [NAL9602](INFO): GPS fix at 20180311T002627: (21.246684, -157.987880)
2018-03-11T00:26:30.164Z,1520727990.164 [Default:CheckIn:Read_GPS] Stopped
2018-03-11T00:26:30.164Z,1520727990.164 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-11T00:26:40.194Z,1520728000.194 [DataOverHttps](INFO): Sending 229 bytes from file Logs/20180311T001315/Courier0008.lzma
2018-03-11T00:26:41.391Z,1520728001.391 [DataOverHttps](INFO): Moved sent file to Logs/20180311T001315/Courier0008.lzma.bak
2018-03-11T00:26:41.391Z,1520728001.391 [DataOverHttps](INFO): SBD MOMSN=8010034
2018-03-11T00:26:54.049Z,1520728014.049 [DataOverHttps](INFO): Sending 168 bytes from file Logs/20180311T001315/Express0009.lzma
2018-03-11T00:26:59.890Z,1520728019.890 [DataOverHttps](INFO): Moved sent file to Logs/20180311T001315/Express0009.lzma.bak
2018-03-11T00:26:59.890Z,1520728019.890 [DataOverHttps](INFO): SBD MOMSN=8010038
2018-03-11T00:27:01.109Z,1520728021.109 [Default:CheckIn:Read_Iridium] Stopped
2018-03-11T00:27:01.109Z,1520728021.109 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-11T00:27:01.109Z,1520728021.109 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-11T00:27:06.162Z,1520728026.162 [NAL9602](INFO): Powering down
2018-03-11T00:28:36.871Z,1520728116.871 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:28:36.871Z,1520728116.871 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-03-11T00:28:36.871Z,1520728116.871 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T00:28:36.883Z,1520728116.883 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T00:28:37.281Z,1520728117.281 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T00:28:37.281Z,1520728117.281 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-03-11T00:28:37.672Z,1520728117.672 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T00:28:37.672Z,1520728117.672 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T00:28:37.672Z,1520728117.672 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T00:31:37.815Z,1520728297.815 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:31:37.815Z,1520728297.815 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-03-11T00:31:37.815Z,1520728297.815 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T00:31:37.848Z,1520728297.848 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T00:31:38.263Z,1520728298.263 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T00:31:38.263Z,1520728298.263 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-03-11T00:31:38.603Z,1520728298.603 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T00:31:38.603Z,1520728298.603 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T00:31:38.604Z,1520728298.604 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T00:32:01.416Z,1520728321.416 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-11T00:32:01.416Z,1520728321.416 [Default:CheckIn:C.Wait] Stopped
2018-03-11T00:32:01.416Z,1520728321.416 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-11T00:32:01.416Z,1520728321.416 [Default:CheckIn:D] Running Loop=1
2018-03-11T00:32:01.820Z,1520728321.820 [Default:CheckIn:D] Stopped
2018-03-11T00:32:01.820Z,1520728321.820 [Default:CheckIn:E] Running Loop=1
2018-03-11T00:32:02.221Z,1520728322.221 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 14.502398 min 
2018-03-11T00:32:02.221Z,1520728322.221 [Default:CheckIn:E] Stopped
2018-03-11T00:32:02.221Z,1520728322.221 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-11T00:32:02.221Z,1520728322.221 [Default:CheckIn] Stopped
2018-03-11T00:32:02.221Z,1520728322.221 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-11T00:32:02.222Z,1520728322.222 [Default:CheckIn](INFO): Running loop #3
2018-03-11T00:32:02.222Z,1520728322.222 [Default:CheckIn] Running Loop=3
2018-03-11T00:32:02.222Z,1520728322.222 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-11T00:32:02.222Z,1520728322.222 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-11T00:32:07.207Z,1520728327.207 [NAL9602](INFO): Powering up
2018-03-11T00:32:18.374Z,1520728338.374 [NAL9602](INFO): NAL9602 initialized
2018-03-11T00:33:32.612Z,1520728412.612 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-11T00:33:58.133Z,1520728438.133 [NAL9602](INFO): SBD MO Status=2, MOMSN=5013, MT Status=2, MTMSN=0
2018-03-11T00:33:58.133Z,1520728438.133 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-11T00:34:21.135Z,1520728461.135 [NAL9602](INFO): SBD MO Status=2, MOMSN=5013, MT Status=2, MTMSN=0
2018-03-11T00:34:21.135Z,1520728461.135 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-11T00:34:38.869Z,1520728478.869 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:34:38.869Z,1520728478.869 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-03-11T00:34:38.869Z,1520728478.869 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T00:34:38.914Z,1520728478.914 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T00:34:39.419Z,1520728479.419 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T00:34:39.419Z,1520728479.419 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-03-11T00:34:39.567Z,1520728479.567 [NAL9602](INFO): SBD MO Status=0, MOMSN=5013, MT Status=0, MTMSN=0
2018-03-11T00:34:39.568Z,1520728479.568 [NAL9602](INFO): No messages in MT queue
2018-03-11T00:34:39.688Z,1520728479.688 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T00:34:39.689Z,1520728479.689 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T00:34:39.689Z,1520728479.689 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T00:36:32.950Z,1520728592.950 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-03-11T00:37:02.229Z,1520728622.229 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-11T00:32:02.2Z
2018-03-11T00:37:02.229Z,1520728622.229 [Default:CheckIn:Read_GPS] Stopped
2018-03-11T00:37:02.229Z,1520728622.229 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-11T00:37:14.089Z,1520728634.089 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180311T001315/Courier0012.lzma
2018-03-11T00:37:16.487Z,1520728636.487 [DataOverHttps](INFO): Moved sent file to Logs/20180311T001315/Courier0012.lzma.bak
2018-03-11T00:37:16.487Z,1520728636.487 [DataOverHttps](INFO): SBD MOMSN=8010104
2018-03-11T00:37:36.744Z,1520728656.744 [NAL9602](INFO): Powering down
2018-03-11T00:37:38.087Z,1520728658.087 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20180311T001315/Express0013.lzma
2018-03-11T00:37:39.727Z,1520728659.727 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:37:39.727Z,1520728659.727 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-03-11T00:37:39.727Z,1520728659.727 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T00:37:39.748Z,1520728659.748 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T00:37:40.147Z,1520728660.147 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T00:37:40.147Z,1520728660.147 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-03-11T00:37:45.031Z,1520728665.031 [DataOverHttps](INFO): Moved sent file to Logs/20180311T001315/Express0013.lzma.bak
2018-03-11T00:37:45.031Z,1520728665.031 [DataOverHttps](INFO): SBD MOMSN=8010113
2018-03-11T00:37:45.085Z,1520728665.085 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T00:37:45.085Z,1520728665.085 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T00:37:45.086Z,1520728665.086 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T00:37:46.646Z,1520728666.646 [Default:CheckIn:Read_Iridium] Stopped
2018-03-11T00:37:46.646Z,1520728666.646 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-11T00:37:46.647Z,1520728666.647 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-11T00:40:45.235Z,1520728845.235 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:40:45.235Z,1520728845.235 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-03-11T00:40:45.236Z,1520728845.236 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T00:40:45.268Z,1520728845.268 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T00:40:45.645Z,1520728845.645 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T00:40:45.645Z,1520728845.645 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-03-11T00:40:46.032Z,1520728846.032 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T00:40:46.033Z,1520728846.033 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T00:40:46.034Z,1520728846.034 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T00:41:17.158Z,1520728877.158 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-03-11T00:42:46.978Z,1520728966.978 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-11T00:42:46.978Z,1520728966.978 [Default:CheckIn:C.Wait] Stopped
2018-03-11T00:42:46.978Z,1520728966.978 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-11T00:42:46.979Z,1520728966.979 [Default:CheckIn:D] Running Loop=1
2018-03-11T00:42:47.391Z,1520728967.391 [Default:CheckIn:D] Stopped
2018-03-11T00:42:47.391Z,1520728967.391 [Default:CheckIn:E] Running Loop=1
2018-03-11T00:42:47.783Z,1520728967.783 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 25.261912 min 
2018-03-11T00:42:47.783Z,1520728967.783 [Default:CheckIn:E] Stopped
2018-03-11T00:42:47.783Z,1520728967.783 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-11T00:42:47.783Z,1520728967.783 [Default:CheckIn] Stopped
2018-03-11T00:42:47.783Z,1520728967.783 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-11T00:42:47.783Z,1520728967.783 [Default:CheckIn](INFO): Running loop #4
2018-03-11T00:42:47.783Z,1520728967.783 [Default:CheckIn] Running Loop=4
2018-03-11T00:42:47.784Z,1520728967.784 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-11T00:42:47.784Z,1520728967.784 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-11T00:42:48.534Z,1520728968.534 [NAL9602](INFO): Powering up
2018-03-11T00:42:59.734Z,1520728979.734 [NAL9602](INFO): NAL9602 initialized
2018-03-11T00:43:00.534Z,1520728980.534 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-11T00:43:00.534Z,1520728980.534 [NAL9602] Data Fault, FailCount= 1
2018-03-11T00:43:00.534Z,1520728980.534 [NAL9602](ERROR): Data Fault
2018-03-11T00:43:00.618Z,1520728980.618 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-11T00:43:00.938Z,1520728980.938 [NAL9602](INFO): Powering down
2018-03-11T00:43:01.791Z,1520728981.791 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-11T00:43:01.791Z,1520728981.791 [NAL9602] No Fault, FailCount= 1
2018-03-11T00:43:17.330Z,1520728997.330 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-03-11T00:43:31.332Z,1520729011.332 [NAL9602](INFO): Powering up NAL9602
2018-03-11T00:43:33.034Z,1520729013.034 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-11T00:43:42.138Z,1520729022.138 [NAL9602](INFO): NAL9602 initialized
2018-03-11T00:43:46.181Z,1520729026.181 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:43:46.181Z,1520729026.181 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-03-11T00:43:46.181Z,1520729026.181 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T00:43:46.193Z,1520729026.193 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T00:43:46.596Z,1520729026.596 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T00:43:46.597Z,1520729026.597 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-03-11T00:43:46.978Z,1520729026.978 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T00:43:46.978Z,1520729026.978 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T00:43:46.979Z,1520729026.979 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T00:44:21.807Z,1520729061.807 [NAL9602](INFO): SBD MO Status=0, MOMSN=5014, MT Status=0, MTMSN=0
2018-03-11T00:44:21.808Z,1520729061.808 [NAL9602](INFO): No messages in MT queue
2018-03-11T00:45:17.398Z,1520729117.398 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-03-11T00:46:47.175Z,1520729207.175 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:46:47.175Z,1520729207.175 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-03-11T00:46:47.175Z,1520729207.175 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T00:46:47.208Z,1520729207.208 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T00:46:47.639Z,1520729207.639 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T00:46:47.639Z,1520729207.639 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-03-11T00:46:48.007Z,1520729208.007 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T00:46:48.008Z,1520729208.008 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T00:46:48.008Z,1520729208.008 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T00:47:47.805Z,1520729267.805 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-11T00:42:47.8Z
2018-03-11T00:47:47.805Z,1520729267.805 [Default:CheckIn:Read_GPS] Stopped
2018-03-11T00:47:47.805Z,1520729267.805 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-11T00:47:51.916Z,1520729271.916 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180311T001315/Courier0016.lzma
2018-03-11T00:47:52.703Z,1520729272.703 [DataOverHttps](INFO): Moved sent file to Logs/20180311T001315/Courier0016.lzma.bak
2018-03-11T00:47:52.703Z,1520729272.703 [DataOverHttps](INFO): SBD MOMSN=8010168
2018-03-11T00:48:03.700Z,1520729283.700 [DataOverHttps](INFO): Sending 185 bytes from file Logs/20180311T001315/Express0017.lzma
2018-03-11T00:48:04.492Z,1520729284.492 [DataOverHttps](INFO): Moved sent file to Logs/20180311T001315/Express0017.lzma.bak
2018-03-11T00:48:04.492Z,1520729284.492 [DataOverHttps](INFO): SBD MOMSN=8010170
2018-03-11T00:48:05.233Z,1520729285.233 [Default:CheckIn:Read_Iridium] Stopped
2018-03-11T00:48:05.233Z,1520729285.233 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-11T00:48:05.233Z,1520729285.233 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-11T00:48:23.818Z,1520729303.818 [NAL9602](INFO): Powering down
2018-03-11T00:49:48.090Z,1520729388.090 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:49:48.090Z,1520729388.090 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-03-11T00:49:48.090Z,1520729388.090 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T00:49:48.102Z,1520729388.102 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T00:49:48.499Z,1520729388.499 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T00:49:48.499Z,1520729388.499 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-03-11T00:49:48.888Z,1520729388.888 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T00:49:48.889Z,1520729388.889 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T00:49:48.893Z,1520729388.893 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T00:51:36.146Z,1520729496.146 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-03-11T00:52:49.141Z,1520729569.141 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:52:49.142Z,1520729569.142 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-03-11T00:52:49.142Z,1520729569.142 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T00:52:49.155Z,1520729569.155 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T00:52:49.556Z,1520729569.556 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T00:52:49.556Z,1520729569.556 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-03-11T00:52:49.944Z,1520729569.944 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T00:52:49.945Z,1520729569.945 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T00:52:49.945Z,1520729569.945 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T00:53:05.526Z,1520729585.526 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-11T00:53:05.526Z,1520729585.526 [Default:CheckIn:C.Wait] Stopped
2018-03-11T00:53:05.526Z,1520729585.526 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-11T00:53:05.526Z,1520729585.526 [Default:CheckIn:D] Running Loop=1
2018-03-11T00:53:05.948Z,1520729585.948 [Default:CheckIn:D] Stopped
2018-03-11T00:53:05.948Z,1520729585.948 [Default:CheckIn:E] Running Loop=1
2018-03-11T00:53:06.360Z,1520729586.360 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 35.571195 min 
2018-03-11T00:53:06.360Z,1520729586.360 [Default:CheckIn:E] Stopped
2018-03-11T00:53:06.360Z,1520729586.360 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-11T00:53:06.360Z,1520729586.360 [Default:CheckIn] Stopped
2018-03-11T00:53:06.360Z,1520729586.360 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-11T00:53:06.360Z,1520729586.360 [Default:CheckIn](INFO): Running loop #5
2018-03-11T00:53:06.360Z,1520729586.360 [Default:CheckIn] Running Loop=5
2018-03-11T00:53:06.361Z,1520729586.361 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-11T00:53:06.361Z,1520729586.361 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-11T00:53:10.720Z,1520729590.720 [NAL9602](INFO): Powering up
2018-03-11T00:53:21.606Z,1520729601.606 [NAL9602](INFO): NAL9602 initialized
2018-03-11T00:53:33.316Z,1520729613.316 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-11T00:54:25.316Z,1520729665.316 [NAL9602](INFO): SBD MO Status=2, MOMSN=5015, MT Status=2, MTMSN=0
2018-03-11T00:54:25.316Z,1520729665.316 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-11T00:54:41.315Z,1520729681.315 [NAL9602](INFO): SBD MO Status=0, MOMSN=5015, MT Status=0, MTMSN=0
2018-03-11T00:54:41.316Z,1520729681.316 [NAL9602](INFO): No messages in MT queue
2018-03-11T00:54:42.118Z,1520729682.118 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-11T00:54:42.118Z,1520729682.118 [NAL9602] Data Fault, FailCount= 1
2018-03-11T00:54:42.118Z,1520729682.118 [NAL9602](ERROR): Data Fault
2018-03-11T00:54:42.189Z,1520729682.189 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-11T00:54:42.515Z,1520729682.515 [NAL9602](INFO): Powering down
2018-03-11T00:54:43.393Z,1520729683.393 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-11T00:54:43.393Z,1520729683.393 [NAL9602] No Fault, FailCount= 1
2018-03-11T00:55:12.726Z,1520729712.726 [NAL9602](INFO): Powering up NAL9602
2018-03-11T00:55:23.934Z,1520729723.934 [NAL9602](INFO): NAL9602 initialized
2018-03-11T00:55:49.997Z,1520729749.997 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:55:49.997Z,1520729749.997 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-03-11T00:55:49.997Z,1520729749.997 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T00:55:50.027Z,1520729750.027 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T00:55:50.434Z,1520729750.434 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T00:55:50.434Z,1520729750.434 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-03-11T00:55:50.801Z,1520729750.801 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T00:55:50.801Z,1520729750.801 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T00:55:50.802Z,1520729750.802 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T00:57:12.722Z,1520729832.722 [NAL9602](INFO): GPS fix at 20180311T005709: (21.236790, -158.088714)
2018-03-11T00:57:12.810Z,1520729832.810 [Default:CheckIn:Read_GPS] Stopped
2018-03-11T00:57:12.811Z,1520729832.811 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-11T00:57:19.325Z,1520729839.325 [DataOverHttps](INFO): Sending 62 bytes from file Logs/20180311T001315/Courier0020.lzma
2018-03-11T00:57:20.119Z,1520729840.119 [DataOverHttps](INFO): Moved sent file to Logs/20180311T001315/Courier0020.lzma.bak
2018-03-11T00:57:20.119Z,1520729840.119 [DataOverHttps](INFO): SBD MOMSN=8010234
2018-03-11T00:57:30.101Z,1520729850.101 [DataOverHttps](INFO): Sending 178 bytes from file Logs/20180311T001315/Express0021.lzma
2018-03-11T00:57:30.899Z,1520729850.899 [DataOverHttps](INFO): Moved sent file to Logs/20180311T001315/Express0021.lzma.bak
2018-03-11T00:57:30.899Z,1520729850.899 [DataOverHttps](INFO): SBD MOMSN=8010237
2018-03-11T00:57:31.633Z,1520729851.633 [Default:CheckIn:Read_Iridium] Stopped
2018-03-11T00:57:31.633Z,1520729851.633 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-11T00:57:31.634Z,1520729851.634 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-11T00:57:44.098Z,1520729864.098 [NAL9602](INFO): Powering down
2018-03-11T00:58:50.945Z,1520729930.945 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T00:58:50.946Z,1520729930.946 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-03-11T00:58:50.946Z,1520729930.946 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T00:58:50.978Z,1520729930.978 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T00:58:51.376Z,1520729931.376 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T00:58:51.376Z,1520729931.376 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-03-11T00:58:51.744Z,1520729931.744 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T00:58:51.745Z,1520729931.745 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T00:58:51.745Z,1520729931.745 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T01:01:51.973Z,1520730111.973 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T01:01:51.973Z,1520730111.973 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-03-11T01:01:51.973Z,1520730111.973 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T01:01:51.987Z,1520730111.987 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T01:01:52.385Z,1520730112.385 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T01:01:52.385Z,1520730112.385 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-03-11T01:01:52.783Z,1520730112.783 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T01:01:52.784Z,1520730112.784 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T01:01:52.784Z,1520730112.784 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T01:02:31.972Z,1520730151.972 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-11T01:02:31.972Z,1520730151.972 [Default:CheckIn:C.Wait] Stopped
2018-03-11T01:02:31.972Z,1520730151.972 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-11T01:02:31.972Z,1520730151.972 [Default:CheckIn:D] Running Loop=1
2018-03-11T01:02:32.394Z,1520730152.394 [Default:CheckIn:D] Stopped
2018-03-11T01:02:32.394Z,1520730152.394 [Default:CheckIn:E] Running Loop=1
2018-03-11T01:02:35.504Z,1520730155.504 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 45.011951 min 
2018-03-11T01:02:35.504Z,1520730155.504 [Default:CheckIn:E] Stopped
2018-03-11T01:02:35.504Z,1520730155.504 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-11T01:02:35.504Z,1520730155.504 [Default:CheckIn] Stopped
2018-03-11T01:02:35.504Z,1520730155.504 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-11T01:02:35.504Z,1520730155.504 [Default:CheckIn](INFO): Running loop #6
2018-03-11T01:02:35.505Z,1520730155.505 [Default:CheckIn] Running Loop=6
2018-03-11T01:02:35.505Z,1520730155.505 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-11T01:02:35.505Z,1520730155.505 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-11T01:02:35.985Z,1520730155.985 [NAL9602](INFO): Powering up
2018-03-11T01:02:47.174Z,1520730167.174 [NAL9602](INFO): NAL9602 initialized
2018-03-11T01:03:35.780Z,1520730215.780 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-11T01:03:46.603Z,1520730226.603 [NAL9602](INFO): SBD MO Status=2, MOMSN=5016, MT Status=2, MTMSN=0
2018-03-11T01:03:46.604Z,1520730226.604 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-11T01:04:52.611Z,1520730292.611 [NAL9602](INFO): SBD MO Status=2, MOMSN=5016, MT Status=2, MTMSN=0
2018-03-11T01:04:52.612Z,1520730292.612 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-11T01:04:53.070Z,1520730293.070 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T01:04:53.071Z,1520730293.071 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-03-11T01:04:53.071Z,1520730293.071 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T01:04:53.083Z,1520730293.083 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T01:04:53.472Z,1520730293.472 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T01:04:53.473Z,1520730293.473 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-03-11T01:04:53.842Z,1520730293.842 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T01:04:53.843Z,1520730293.843 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T01:04:53.843Z,1520730293.843 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T01:05:22.212Z,1520730322.212 [NAL9602](INFO): SBD MO Status=2, MOMSN=5016, MT Status=2, MTMSN=0
2018-03-11T01:05:22.212Z,1520730322.212 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-11T01:05:56.516Z,1520730356.516 [NAL9602](INFO): SBD MO Status=2, MOMSN=5016, MT Status=2, MTMSN=0
2018-03-11T01:05:56.516Z,1520730356.516 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-11T01:06:14.507Z,1520730374.507 [NAL9602](INFO): SBD MO Status=2, MOMSN=5016, MT Status=2, MTMSN=0
2018-03-11T01:06:14.508Z,1520730374.508 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-11T01:07:36.206Z,1520730456.206 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-11T01:02:35.5Z
2018-03-11T01:07:36.206Z,1520730456.206 [Default:CheckIn:Read_GPS] Stopped
2018-03-11T01:07:36.207Z,1520730456.207 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-11T01:07:36.792Z,1520730456.792 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180311T001315/Courier0024.lzma
2018-03-11T01:07:36.798Z,1520730456.798 [NAL9602](INFO): SBD MO Status=2, MOMSN=5016, MT Status=2, MTMSN=0
2018-03-11T01:07:36.798Z,1520730456.798 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-11T01:07:37.831Z,1520730457.831 [DataOverHttps](INFO): Moved sent file to Logs/20180311T001315/Courier0024.lzma.bak
2018-03-11T01:07:37.831Z,1520730457.831 [DataOverHttps](INFO): SBD MOMSN=8010313
2018-03-11T01:07:47.889Z,1520730467.889 [DataOverHttps](INFO): Sending 121 bytes from file Logs/20180311T001315/Express0025.lzma
2018-03-11T01:07:48.683Z,1520730468.683 [DataOverHttps](INFO): Moved sent file to Logs/20180311T001315/Express0025.lzma.bak
2018-03-11T01:07:48.683Z,1520730468.683 [DataOverHttps](INFO): SBD MOMSN=8010315
2018-03-11T01:07:49.444Z,1520730469.444 [Default:CheckIn:Read_Iridium] Stopped
2018-03-11T01:07:49.444Z,1520730469.444 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-11T01:07:49.444Z,1520730469.444 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-11T01:07:53.021Z,1520730473.021 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-11T01:07:53.972Z,1520730473.972 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T01:07:53.972Z,1520730473.972 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-03-11T01:07:53.972Z,1520730473.972 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T01:07:53.993Z,1520730473.993 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T01:07:54.389Z,1520730474.389 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T01:07:54.389Z,1520730474.389 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-03-11T01:07:54.761Z,1520730474.761 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T01:07:54.761Z,1520730474.761 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T01:07:54.762Z,1520730474.762 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T01:08:23.522Z,1520730503.522 [NAL9602](INFO): Powering down
2018-03-11T01:10:54.828Z,1520730654.828 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T01:10:54.829Z,1520730654.829 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-03-11T01:10:54.829Z,1520730654.829 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T01:10:54.846Z,1520730654.846 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T01:10:55.249Z,1520730655.249 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T01:10:55.249Z,1520730655.249 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-03-11T01:10:55.614Z,1520730655.614 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T01:10:55.615Z,1520730655.615 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T01:10:55.615Z,1520730655.615 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T01:12:49.685Z,1520730769.685 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-11T01:12:49.693Z,1520730769.693 [Default:CheckIn:C.Wait] Stopped
2018-03-11T01:12:49.693Z,1520730769.693 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-11T01:12:49.693Z,1520730769.693 [Default:CheckIn:D] Running Loop=1
2018-03-11T01:12:50.113Z,1520730770.113 [Default:CheckIn:D] Stopped
2018-03-11T01:12:50.113Z,1520730770.113 [Default:CheckIn:E] Running Loop=1
2018-03-11T01:12:53.220Z,1520730773.220 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 55.307267 min 
2018-03-11T01:12:53.220Z,1520730773.220 [Default:CheckIn:E] Stopped
2018-03-11T01:12:53.220Z,1520730773.220 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-11T01:12:53.221Z,1520730773.221 [Default:CheckIn] Stopped
2018-03-11T01:12:53.221Z,1520730773.221 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-11T01:12:53.221Z,1520730773.221 [Default:CheckIn](INFO): Running loop #7
2018-03-11T01:12:53.221Z,1520730773.221 [Default:CheckIn] Running Loop=7
2018-03-11T01:12:53.221Z,1520730773.221 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-11T01:12:53.221Z,1520730773.221 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-11T01:12:53.658Z,1520730773.658 [NAL9602](INFO): Powering up
2018-03-11T01:13:04.878Z,1520730784.878 [NAL9602](INFO): NAL9602 initialized
2018-03-11T01:13:05.668Z,1520730785.668 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-11T01:13:05.668Z,1520730785.668 [NAL9602] Data Fault, FailCount= 2
2018-03-11T01:13:05.668Z,1520730785.668 [NAL9602](ERROR): Data Fault
2018-03-11T01:13:05.744Z,1520730785.744 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-11T01:13:06.050Z,1520730786.050 [NAL9602](INFO): Powering down
2018-03-11T01:13:06.910Z,1520730786.910 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-11T01:13:06.911Z,1520730786.911 [NAL9602] No Fault, FailCount= 2
2018-03-11T01:13:36.105Z,1520730816.105 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-11T01:13:36.454Z,1520730816.454 [NAL9602](INFO): Powering up NAL9602
2018-03-11T01:13:47.651Z,1520730827.651 [NAL9602](INFO): NAL9602 initialized
2018-03-11T01:13:55.720Z,1520730835.720 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T01:13:55.720Z,1520730835.720 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-03-11T01:13:55.720Z,1520730835.720 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T01:13:55.745Z,1520730835.745 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T01:13:56.132Z,1520730836.132 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T01:13:56.132Z,1520730836.132 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-03-11T01:13:56.530Z,1520730836.530 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T01:13:56.530Z,1520730836.530 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T01:13:56.531Z,1520730836.531 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T01:14:28.471Z,1520730868.471 [NAL9602](INFO): SBD MO Status=2, MOMSN=5016, MT Status=2, MTMSN=0
2018-03-11T01:14:28.472Z,1520730868.472 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-11T01:14:53.602Z,1520730893.602 [NAL9602](INFO): SBD MO Status=2, MOMSN=5016, MT Status=2, MTMSN=0
2018-03-11T01:14:53.602Z,1520730893.602 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-11T01:15:49.319Z,1520730949.319 [NAL9602](INFO): SBD MO Status=2, MOMSN=5016, MT Status=2, MTMSN=0
2018-03-11T01:15:49.320Z,1520730949.320 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-11T01:16:56.635Z,1520731016.635 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T01:16:56.635Z,1520731016.635 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-03-11T01:16:56.635Z,1520731016.635 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T01:16:56.668Z,1520731016.668 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T01:16:57.074Z,1520731017.074 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T01:16:57.074Z,1520731017.074 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-03-11T01:16:57.430Z,1520731017.430 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T01:16:57.431Z,1520731017.431 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T01:16:57.431Z,1520731017.431 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T01:17:53.784Z,1520731073.784 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-11T01:12:53.2Z
2018-03-11T01:17:53.784Z,1520731073.784 [Default:CheckIn:Read_GPS] Stopped
2018-03-11T01:17:53.784Z,1520731073.784 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-11T01:17:54.367Z,1520731074.367 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180311T001315/Courier0028.lzma
2018-03-11T01:17:55.015Z,1520731075.015 [DataOverHttps](INFO): Moved sent file to Logs/20180311T001315/Courier0028.lzma.bak
2018-03-11T01:17:55.015Z,1520731075.015 [DataOverHttps](INFO): SBD MOMSN=8010403
2018-03-11T01:18:05.770Z,1520731085.770 [DataOverHttps](INFO): Sending 215 bytes from file Logs/20180311T001315/Express0029.lzma
2018-03-11T01:18:06.563Z,1520731086.563 [DataOverHttps](INFO): Moved sent file to Logs/20180311T001315/Express0029.lzma.bak
2018-03-11T01:18:06.563Z,1520731086.563 [DataOverHttps](INFO): SBD MOMSN=8010405
2018-03-11T01:18:07.315Z,1520731087.315 [Default:CheckIn:Read_Iridium] Stopped
2018-03-11T01:18:07.315Z,1520731087.315 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-11T01:18:07.315Z,1520731087.315 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-11T01:18:53.786Z,1520731133.786 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-11T01:19:24.431Z,1520731164.431 [NAL9602](INFO): Powering down
2018-03-11T01:19:57.681Z,1520731197.681 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T01:19:57.681Z,1520731197.681 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-03-11T01:19:57.681Z,1520731197.681 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T01:19:57.693Z,1520731197.693 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T01:19:58.087Z,1520731198.087 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T01:19:58.087Z,1520731198.087 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-03-11T01:19:58.484Z,1520731198.484 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T01:19:58.485Z,1520731198.485 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T01:19:58.485Z,1520731198.485 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T01:22:58.869Z,1520731378.869 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T01:22:58.869Z,1520731378.869 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-03-11T01:22:58.869Z,1520731378.869 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T01:22:58.893Z,1520731378.893 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T01:22:59.267Z,1520731379.267 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T01:22:59.267Z,1520731379.267 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-03-11T01:22:59.689Z,1520731379.689 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T01:22:59.689Z,1520731379.689 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T01:22:59.690Z,1520731379.690 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T01:23:07.663Z,1520731387.663 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-11T01:23:07.663Z,1520731387.663 [Default:CheckIn:C.Wait] Stopped
2018-03-11T01:23:07.663Z,1520731387.663 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-11T01:23:07.663Z,1520731387.663 [Default:CheckIn:D] Running Loop=1
2018-03-11T01:23:08.063Z,1520731388.063 [Default:CheckIn:D] Stopped
2018-03-11T01:23:08.063Z,1520731388.063 [Default:CheckIn:E] Running Loop=1
2018-03-11T01:23:08.464Z,1520731388.464 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 65.606449 min 
2018-03-11T01:23:08.464Z,1520731388.464 [Default:CheckIn:E] Stopped
2018-03-11T01:23:08.465Z,1520731388.465 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-11T01:23:08.465Z,1520731388.465 [Default:CheckIn] Stopped
2018-03-11T01:23:08.465Z,1520731388.465 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-11T01:23:08.465Z,1520731388.465 [Default:CheckIn](INFO): Running loop #8
2018-03-11T01:23:08.465Z,1520731388.465 [Default:CheckIn] Running Loop=8
2018-03-11T01:23:08.465Z,1520731388.465 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-11T01:23:08.465Z,1520731388.465 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-11T01:23:11.708Z,1520731391.708 [NAL9602](INFO): Powering up
2018-03-11T01:23:22.894Z,1520731402.894 [NAL9602](INFO): NAL9602 initialized
2018-03-11T01:23:36.154Z,1520731416.154 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-11T01:23:54.892Z,1520731434.892 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-03-11T01:23:54.973Z,1520731434.973 [NAL9602](FAULT): received: 
+CSQ:0

OK16, 2, 0, 0, 0

OK
2018-03-11T01:23:54.973Z,1520731434.973 [NAL9602] Data Fault, FailCount= 3
2018-03-11T01:23:54.973Z,1520731434.973 [NAL9602](ERROR): Data Fault
2018-03-11T01:23:55.047Z,1520731435.047 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-11T01:23:55.294Z,1520731435.294 [NAL9602](INFO): Powering down
2018-03-11T01:23:56.153Z,1520731436.153 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-11T01:23:56.153Z,1520731436.153 [NAL9602] No Fault, FailCount= 3
2018-03-11T01:24:25.298Z,1520731465.298 [NAL9602](INFO): Powering up NAL9602
2018-03-11T01:24:36.098Z,1520731476.098 [NAL9602](INFO): NAL9602 initialized
2018-03-11T01:24:36.896Z,1520731476.896 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-11T01:24:36.896Z,1520731476.896 [NAL9602] Data Fault, FailCount= 4
2018-03-11T01:24:36.896Z,1520731476.896 [NAL9602](ERROR): Data Fault
2018-03-11T01:24:36.986Z,1520731476.986 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-11T01:24:37.302Z,1520731477.302 [NAL9602](INFO): Powering down
2018-03-11T01:24:38.149Z,1520731478.149 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-11T01:24:38.149Z,1520731478.149 [NAL9602] No Fault, FailCount= 4
2018-03-11T01:25:07.314Z,1520731507.314 [NAL9602](INFO): Powering up NAL9602
2018-03-11T01:25:18.174Z,1520731518.174 [NAL9602](INFO): NAL9602 initialized
2018-03-11T01:25:34.159Z,1520731534.159 [NAL9602](INFO): SBD MO Status=2, MOMSN=5016, MT Status=2, MTMSN=0
2018-03-11T01:25:34.159Z,1520731534.159 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-11T01:25:59.798Z,1520731559.798 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T01:25:59.798Z,1520731559.798 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-03-11T01:25:59.798Z,1520731559.798 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T01:25:59.810Z,1520731559.810 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T01:26:00.222Z,1520731560.222 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T01:26:00.222Z,1520731560.222 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-03-11T01:26:00.606Z,1520731560.606 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T01:26:00.606Z,1520731560.606 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T01:26:00.606Z,1520731560.606 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T01:28:08.663Z,1520731688.663 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-11T01:23:08.5Z
2018-03-11T01:28:08.663Z,1520731688.663 [Default:CheckIn:Read_GPS] Stopped
2018-03-11T01:28:08.663Z,1520731688.663 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-11T01:28:14.601Z,1520731694.601 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180311T001315/Courier0032.lzma
2018-03-11T01:28:15.399Z,1520731695.399 [DataOverHttps](INFO): Moved sent file to Logs/20180311T001315/Courier0032.lzma.bak
2018-03-11T01:28:15.399Z,1520731695.399 [DataOverHttps](INFO): SBD MOMSN=8010473
2018-03-11T01:28:28.066Z,1520731708.066 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-11T01:28:28.610Z,1520731708.610 [DataOverHttps](INFO): Sending 251 bytes from file Logs/20180311T001315/Express0033.lzma
2018-03-11T01:28:29.407Z,1520731709.407 [DataOverHttps](INFO): Moved sent file to Logs/20180311T001315/Express0033.lzma.bak
2018-03-11T01:28:29.407Z,1520731709.407 [DataOverHttps](INFO): SBD MOMSN=8010475
2018-03-11T01:28:30.359Z,1520731710.359 [Default:CheckIn:Read_Iridium] Stopped
2018-03-11T01:28:30.359Z,1520731710.359 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-11T01:28:30.359Z,1520731710.359 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-11T01:28:58.518Z,1520731738.518 [NAL9602](INFO): Powering down
2018-03-11T01:29:00.984Z,1520731740.984 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T01:29:00.984Z,1520731740.984 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2018-03-11T01:29:00.984Z,1520731740.984 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T01:29:01.011Z,1520731741.011 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T01:29:01.402Z,1520731741.402 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T01:29:01.402Z,1520731741.402 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2018-03-11T01:29:01.768Z,1520731741.768 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T01:29:01.769Z,1520731741.769 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T01:29:01.769Z,1520731741.769 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T01:32:02.088Z,1520731922.088 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T01:32:02.088Z,1520731922.088 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2018-03-11T01:32:02.088Z,1520731922.088 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T01:32:02.117Z,1520731922.117 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T01:32:02.505Z,1520731922.505 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T01:32:02.505Z,1520731922.505 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2018-03-11T01:32:02.865Z,1520731922.865 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T01:32:02.866Z,1520731922.866 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T01:32:02.866Z,1520731922.866 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T01:33:30.900Z,1520732010.900 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-11T01:33:30.900Z,1520732010.900 [Default:CheckIn:C.Wait] Stopped
2018-03-11T01:33:30.900Z,1520732010.900 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-11T01:33:30.900Z,1520732010.900 [Default:CheckIn:D] Running Loop=1
2018-03-11T01:33:31.304Z,1520732011.304 [Default:CheckIn:D] Stopped
2018-03-11T01:33:31.304Z,1520732011.304 [Default:CheckIn:E] Running Loop=1
2018-03-11T01:33:31.709Z,1520732011.709 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 75.993799 min 
2018-03-11T01:33:31.709Z,1520732011.709 [Default:CheckIn:E] Stopped
2018-03-11T01:33:31.709Z,1520732011.709 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-11T01:33:31.709Z,1520732011.709 [Default:CheckIn] Stopped
2018-03-11T01:33:31.709Z,1520732011.709 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-11T01:33:31.710Z,1520732011.710 [Default:CheckIn](INFO): Running loop #9
2018-03-11T01:33:31.710Z,1520732011.710 [Default:CheckIn] Running Loop=9
2018-03-11T01:33:31.710Z,1520732011.710 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-11T01:33:31.710Z,1520732011.710 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-11T01:33:35.199Z,1520732015.199 [NAL9602](INFO): Powering up
2018-03-11T01:33:36.177Z,1520732016.177 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-11T01:33:46.086Z,1520732026.086 [NAL9602](INFO): NAL9602 initialized
2018-03-11T01:34:18.086Z,1520732058.086 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-03-11T01:34:18.161Z,1520732058.161 [NAL9602](FAULT): received: 
+CSQ:0

OK16, 2, 0, 0, 0

OK
2018-03-11T01:34:18.161Z,1520732058.161 [NAL9602] Data Fault, FailCount= 5
2018-03-11T01:34:18.161Z,1520732058.161 [NAL9602](ERROR): Data Fault
2018-03-11T01:34:18.253Z,1520732058.253 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-11T01:34:18.253Z,1520732058.253 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-03-11T01:34:18.482Z,1520732058.482 [NAL9602](INFO): Powering down
2018-03-11T01:34:18.565Z,1520732058.565 [CommandLine](FAULT): Scheduling is paused
2018-03-11T01:34:18.566Z,1520732058.566 [CBIT](INFO): Critical error at 20180311T013418
2018-03-11T01:34:18.566Z,1520732058.566 [Supervisor](INFO): Stop Mission called by CBIT::checkCriticals
2018-03-11T01:35:02.941Z,1520732102.941 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T01:35:02.941Z,1520732102.941 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2018-03-11T01:35:02.941Z,1520732102.941 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T01:35:02.953Z,1520732102.953 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T01:35:03.344Z,1520732103.344 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T01:35:03.344Z,1520732103.344 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2018-03-11T01:35:03.731Z,1520732103.731 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T01:35:03.732Z,1520732103.732 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T01:35:03.732Z,1520732103.732 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T01:36:18.175Z,1520732178.175 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-11T01:36:18.175Z,1520732178.175 [NAL9602] No Fault, FailCount= 5
2018-03-11T01:36:18.506Z,1520732178.506 [NAL9602](INFO): Powering up NAL9602
2018-03-11T01:36:29.318Z,1520732189.318 [NAL9602](INFO): NAL9602 initialized
2018-03-11T01:36:30.110Z,1520732190.110 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-11T01:36:30.110Z,1520732190.110 [NAL9602] Data Fault, FailCount= 1
2018-03-11T01:36:30.110Z,1520732190.110 [NAL9602](ERROR): Data Fault
2018-03-11T01:36:30.198Z,1520732190.198 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-11T01:36:30.506Z,1520732190.506 [NAL9602](INFO): Powering down
2018-03-11T01:36:31.382Z,1520732191.382 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-11T01:36:31.382Z,1520732191.382 [NAL9602] No Fault, FailCount= 1
2018-03-11T01:37:00.526Z,1520732220.526 [NAL9602](INFO): Powering up NAL9602
2018-03-11T01:37:11.730Z,1520732231.730 [NAL9602](INFO): NAL9602 initialized
2018-03-11T01:38:03.930Z,1520732283.930 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T01:38:03.930Z,1520732283.930 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2018-03-11T01:38:03.930Z,1520732283.930 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T01:38:03.942Z,1520732283.942 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T01:38:04.352Z,1520732284.352 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T01:38:04.352Z,1520732284.352 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2018-03-11T01:38:04.743Z,1520732284.743 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T01:38:04.743Z,1520732284.743 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T01:38:04.743Z,1520732284.743 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T01:38:34.687Z,1520732314.687 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-11T01:33:31.7Z
2018-03-11T01:38:34.687Z,1520732314.687 [Default:CheckIn:Read_GPS] Stopped
2018-03-11T01:38:34.687Z,1520732314.687 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-11T01:38:35.286Z,1520732315.286 [DataOverHttps](INFO): Sending 93 bytes from file Logs/20180311T001315/Courier0036.lzma
2018-03-11T01:38:36.318Z,1520732316.318 [DataOverHttps](INFO): Moved sent file to Logs/20180311T001315/Courier0036.lzma.bak
2018-03-11T01:38:36.319Z,1520732316.319 [DataOverHttps](INFO): SBD MOMSN=8010544
2018-03-11T01:38:46.499Z,1520732326.499 [DataOverHttps](INFO): Sending 301 bytes from file Logs/20180311T001315/Express0037.lzma
2018-03-11T01:38:47.294Z,1520732327.294 [DataOverHttps](INFO): Moved sent file to Logs/20180311T001315/Express0037.lzma.bak
2018-03-11T01:38:47.294Z,1520732327.294 [DataOverHttps](INFO): SBD MOMSN=8010547
2018-03-11T01:38:48.031Z,1520732328.031 [Default:CheckIn:Read_Iridium] Stopped
2018-03-11T01:38:48.031Z,1520732328.031 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-11T01:38:48.031Z,1520732328.031 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-11T01:38:51.612Z,1520732331.612 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-11T01:39:21.727Z,1520732361.727 [NAL9602](INFO): Powering down
2018-03-11T01:41:05.032Z,1520732465.032 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T01:41:05.032Z,1520732465.032 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2018-03-11T01:41:05.032Z,1520732465.032 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T01:41:05.089Z,1520732465.089 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T01:41:05.482Z,1520732465.482 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T01:41:05.482Z,1520732465.482 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2018-03-11T01:41:05.851Z,1520732465.851 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T01:41:05.851Z,1520732465.851 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T01:41:05.851Z,1520732465.851 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T01:43:36.301Z,1520732616.301 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-11T01:43:48.263Z,1520732628.263 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-11T01:43:48.263Z,1520732628.263 [Default:CheckIn:C.Wait] Stopped
2018-03-11T01:43:48.263Z,1520732628.263 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-11T01:43:48.263Z,1520732628.263 [Default:CheckIn:D] Running Loop=1
2018-03-11T01:43:48.701Z,1520732628.701 [Default:CheckIn:D] Stopped
2018-03-11T01:43:48.701Z,1520732628.701 [Default:CheckIn:E] Running Loop=1
2018-03-11T01:43:51.801Z,1520732631.801 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 86.283740 min 
2018-03-11T01:43:51.801Z,1520732631.801 [Default:CheckIn:E] Stopped
2018-03-11T01:43:51.801Z,1520732631.801 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-11T01:43:51.801Z,1520732631.801 [Default:CheckIn] Stopped
2018-03-11T01:43:51.801Z,1520732631.801 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-11T01:43:51.801Z,1520732631.801 [Default:CheckIn](INFO): Running loop #10
2018-03-11T01:43:51.802Z,1520732631.802 [Default:CheckIn] Running Loop=10
2018-03-11T01:43:51.802Z,1520732631.802 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-11T01:43:51.802Z,1520732631.802 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-11T01:43:52.239Z,1520732632.239 [NAL9602](INFO): Powering up
2018-03-11T01:44:03.434Z,1520732643.434 [NAL9602](INFO): NAL9602 initialized
2018-03-11T01:44:05.883Z,1520732645.883 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T01:44:05.883Z,1520732645.883 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2018-03-11T01:44:05.883Z,1520732645.883 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T01:44:05.895Z,1520732645.895 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T01:44:06.292Z,1520732646.292 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T01:44:06.292Z,1520732646.292 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2018-03-11T01:44:06.682Z,1520732646.682 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T01:44:06.682Z,1520732646.682 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T01:44:06.682Z,1520732646.682 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T01:44:35.438Z,1520732675.438 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-03-11T01:44:35.517Z,1520732675.517 [NAL9602](FAULT): received: 
+CSQ:0

OK16, 2, 0, 0, 0

OK
2018-03-11T01:44:35.517Z,1520732675.517 [NAL9602] Data Fault, FailCount= 2
2018-03-11T01:44:35.517Z,1520732675.517 [NAL9602](ERROR): Data Fault
2018-03-11T01:44:35.602Z,1520732675.602 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-11T01:44:35.834Z,1520732675.834 [NAL9602](INFO): Powering down
2018-03-11T01:44:36.718Z,1520732676.718 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-11T01:44:36.718Z,1520732676.718 [NAL9602] No Fault, FailCount= 2
2018-03-11T01:45:05.843Z,1520732705.843 [NAL9602](INFO): Powering up NAL9602
2018-03-11T01:45:17.038Z,1520732717.038 [NAL9602](INFO): NAL9602 initialized
2018-03-11T01:47:06.853Z,1520732826.853 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T01:47:06.853Z,1520732826.853 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2018-03-11T01:47:06.853Z,1520732826.853 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T01:47:06.882Z,1520732826.882 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T01:47:07.301Z,1520732827.301 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T01:47:07.302Z,1520732827.302 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2018-03-11T01:47:07.686Z,1520732827.686 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T01:47:07.687Z,1520732827.687 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T01:47:07.687Z,1520732827.687 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T01:48:52.049Z,1520732932.049 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-11T01:43:51.8Z
2018-03-11T01:48:52.049Z,1520732932.049 [Default:CheckIn:Read_GPS] Stopped
2018-03-11T01:48:52.049Z,1520732932.049 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-11T01:48:52.632Z,1520732932.632 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180311T001315/Courier0040.lzma
2018-03-11T01:48:53.275Z,1520732933.275 [DataOverHttps](INFO): Moved sent file to Logs/20180311T001315/Courier0040.lzma.bak
2018-03-11T01:48:53.275Z,1520732933.275 [DataOverHttps](INFO): SBD MOMSN=8010609
2018-03-11T01:49:03.353Z,1520732943.353 [DataOverHttps](INFO): Sending 234 bytes from file Logs/20180311T001315/Express0041.lzma
2018-03-11T01:49:04.147Z,1520732944.147 [DataOverHttps](INFO): Moved sent file to Logs/20180311T001315/Express0041.lzma.bak
2018-03-11T01:49:04.147Z,1520732944.147 [DataOverHttps](INFO): SBD MOMSN=8010611
2018-03-11T01:49:05.210Z,1520732945.210 [Default:CheckIn:Read_Iridium] Stopped
2018-03-11T01:49:05.210Z,1520732945.210 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-11T01:49:05.210Z,1520732945.210 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-11T01:49:09.199Z,1520732949.199 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-11T01:49:39.711Z,1520732979.711 [NAL9602](INFO): Powering down
2018-03-11T01:50:08.846Z,1520733008.846 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T01:50:08.846Z,1520733008.846 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2018-03-11T01:50:08.846Z,1520733008.846 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T01:50:08.898Z,1520733008.898 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T01:50:08.987Z,1520733008.987 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T01:50:08.987Z,1520733008.987 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2018-03-11T01:50:09.397Z,1520733009.397 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T01:50:09.398Z,1520733009.398 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T01:50:09.398Z,1520733009.398 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T01:53:10.049Z,1520733190.049 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T01:53:10.049Z,1520733190.049 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2018-03-11T01:53:10.049Z,1520733190.049 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T01:53:10.061Z,1520733190.061 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T01:53:10.191Z,1520733190.191 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T01:53:10.191Z,1520733190.191 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2018-03-11T01:53:10.550Z,1520733190.550 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T01:53:10.550Z,1520733190.550 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T01:53:10.550Z,1520733190.550 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T01:53:36.533Z,1520733216.533 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-11T01:54:05.728Z,1520733245.728 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-11T01:54:05.728Z,1520733245.728 [Default:CheckIn:C.Wait] Stopped
2018-03-11T01:54:05.728Z,1520733245.728 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-11T01:54:05.728Z,1520733245.728 [Default:CheckIn:D] Running Loop=1
2018-03-11T01:54:06.126Z,1520733246.126 [Default:CheckIn:D] Stopped
2018-03-11T01:54:06.126Z,1520733246.126 [Default:CheckIn:E] Running Loop=1
2018-03-11T01:54:06.519Z,1520733246.519 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 96.574154 min 
2018-03-11T01:54:06.519Z,1520733246.519 [Default:CheckIn:E] Stopped
2018-03-11T01:54:06.519Z,1520733246.519 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-11T01:54:06.519Z,1520733246.519 [Default:CheckIn] Stopped
2018-03-11T01:54:06.519Z,1520733246.519 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-11T01:54:06.520Z,1520733246.520 [Default:CheckIn](INFO): Running loop #11
2018-03-11T01:54:06.520Z,1520733246.520 [Default:CheckIn] Running Loop=11
2018-03-11T01:54:06.520Z,1520733246.520 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-11T01:54:06.520Z,1520733246.520 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-11T01:54:09.721Z,1520733249.721 [NAL9602](INFO): Powering up
2018-03-11T01:54:20.898Z,1520733260.898 [NAL9602](INFO): NAL9602 initialized
2018-03-11T01:54:21.692Z,1520733261.692 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-11T01:54:21.693Z,1520733261.693 [NAL9602] Data Fault, FailCount= 3
2018-03-11T01:54:21.693Z,1520733261.693 [NAL9602](ERROR): Data Fault
2018-03-11T01:54:21.774Z,1520733261.774 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-11T01:54:22.094Z,1520733262.094 [NAL9602](INFO): Powering down
2018-03-11T01:54:22.950Z,1520733262.950 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-11T01:54:22.950Z,1520733262.950 [NAL9602] No Fault, FailCount= 3
2018-03-11T01:54:52.111Z,1520733292.111 [NAL9602](INFO): Powering up NAL9602
2018-03-11T01:55:03.294Z,1520733303.294 [NAL9602](INFO): NAL9602 initialized
2018-03-11T01:56:10.638Z,1520733370.638 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T01:56:10.639Z,1520733370.639 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2018-03-11T01:56:10.639Z,1520733370.639 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T01:56:10.651Z,1520733370.651 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T01:56:11.030Z,1520733371.030 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T01:56:11.030Z,1520733371.030 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2018-03-11T01:56:11.422Z,1520733371.422 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T01:56:11.423Z,1520733371.423 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T01:56:11.423Z,1520733371.423 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T01:59:06.878Z,1520733546.878 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-11T01:54:06.5Z
2018-03-11T01:59:06.878Z,1520733546.878 [Default:CheckIn:Read_GPS] Stopped
2018-03-11T01:59:06.878Z,1520733546.878 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-11T01:59:11.524Z,1520733551.524 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180311T001315/Courier0044.lzma
2018-03-11T01:59:11.606Z,1520733551.606 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T01:59:11.606Z,1520733551.606 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 21
2018-03-11T01:59:11.606Z,1520733551.606 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T01:59:11.660Z,1520733551.660 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T01:59:11.822Z,1520733551.822 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T01:59:11.822Z,1520733551.822 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 21
2018-03-11T01:59:12.179Z,1520733552.179 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T01:59:12.179Z,1520733552.179 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T01:59:12.179Z,1520733552.179 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T01:59:12.491Z,1520733552.491 [DataOverHttps](INFO): Moved sent file to Logs/20180311T001315/Courier0044.lzma.bak
2018-03-11T01:59:12.491Z,1520733552.491 [DataOverHttps](INFO): SBD MOMSN=8010684
2018-03-11T01:59:22.623Z,1520733562.623 [DataOverHttps](INFO): Sending 219 bytes from file Logs/20180311T001315/Express0045.lzma
2018-03-11T01:59:23.412Z,1520733563.412 [DataOverHttps](INFO): Moved sent file to Logs/20180311T001315/Express0045.lzma.bak
2018-03-11T01:59:23.412Z,1520733563.412 [DataOverHttps](INFO): SBD MOMSN=8010686
2018-03-11T01:59:24.158Z,1520733564.158 [Default:CheckIn:Read_Iridium] Stopped
2018-03-11T01:59:24.158Z,1520733564.158 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-11T01:59:24.158Z,1520733564.158 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-11T02:00:06.230Z,1520733606.230 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-11T02:00:36.658Z,1520733636.658 [NAL9602](INFO): Powering down
2018-03-11T02:02:12.180Z,1520733732.180 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T02:02:12.180Z,1520733732.180 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 22
2018-03-11T02:02:12.180Z,1520733732.180 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T02:02:12.215Z,1520733732.215 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T02:02:12.633Z,1520733732.633 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T02:02:12.633Z,1520733732.633 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 22
2018-03-11T02:02:13.014Z,1520733733.014 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T02:02:13.015Z,1520733733.015 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T02:02:13.015Z,1520733733.015 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T02:03:36.822Z,1520733816.822 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-11T02:04:24.419Z,1520733864.419 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-11T02:04:24.419Z,1520733864.419 [Default:CheckIn:C.Wait] Stopped
2018-03-11T02:04:24.419Z,1520733864.419 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-11T02:04:24.419Z,1520733864.419 [Default:CheckIn:D] Running Loop=1
2018-03-11T02:04:24.818Z,1520733864.818 [Default:CheckIn:D] Stopped
2018-03-11T02:04:24.818Z,1520733864.818 [Default:CheckIn:E] Running Loop=1
2018-03-11T02:04:25.199Z,1520733865.199 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 106.885685 min 
2018-03-11T02:04:25.200Z,1520733865.200 [Default:CheckIn:E] Stopped
2018-03-11T02:04:25.200Z,1520733865.200 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-11T02:04:25.200Z,1520733865.200 [Default:CheckIn] Stopped
2018-03-11T02:04:25.200Z,1520733865.200 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-11T02:04:25.200Z,1520733865.200 [Default:CheckIn](INFO): Running loop #12
2018-03-11T02:04:25.200Z,1520733865.200 [Default:CheckIn] Running Loop=12
2018-03-11T02:04:25.200Z,1520733865.200 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-11T02:04:25.200Z,1520733865.200 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-11T02:04:28.488Z,1520733868.488 [NAL9602](INFO): Powering up
2018-03-11T02:04:39.672Z,1520733879.672 [NAL9602](INFO): NAL9602 initialized
2018-03-11T02:05:11.662Z,1520733911.662 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-03-11T02:05:11.745Z,1520733911.745 [NAL9602](FAULT): received: 
+CSQ:0

OK16, 2, 0, 0, 0

OK
2018-03-11T02:05:11.745Z,1520733911.745 [NAL9602] Data Fault, FailCount= 4
2018-03-11T02:05:11.745Z,1520733911.745 [NAL9602](ERROR): Data Fault
2018-03-11T02:05:11.830Z,1520733911.830 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-11T02:05:12.062Z,1520733912.062 [NAL9602](INFO): Powering down
2018-03-11T02:05:12.914Z,1520733912.914 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-11T02:05:12.915Z,1520733912.915 [NAL9602] No Fault, FailCount= 4
2018-03-11T02:05:13.316Z,1520733913.316 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T02:05:13.316Z,1520733913.316 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 23
2018-03-11T02:05:13.316Z,1520733913.316 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T02:05:13.345Z,1520733913.345 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T02:05:13.715Z,1520733913.715 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T02:05:13.715Z,1520733913.715 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 23
2018-03-11T02:05:14.108Z,1520733914.108 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T02:05:14.109Z,1520733914.109 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T02:05:14.109Z,1520733914.109 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T02:05:42.346Z,1520733942.346 [NAL9602](INFO): Powering up NAL9602
2018-03-11T02:05:53.544Z,1520733953.544 [NAL9602](INFO): NAL9602 initialized
2018-03-11T02:05:54.346Z,1520733954.346 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-11T02:05:54.346Z,1520733954.346 [NAL9602] Data Fault, FailCount= 5
2018-03-11T02:05:54.347Z,1520733954.347 [NAL9602](ERROR): Data Fault
2018-03-11T02:05:54.445Z,1520733954.445 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-11T02:05:54.445Z,1520733954.445 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-03-11T02:05:54.742Z,1520733954.742 [NAL9602](INFO): Powering down
2018-03-11T02:05:54.848Z,1520733954.848 [CBIT](INFO): Critical error at 20180311T020554
2018-03-11T02:07:54.623Z,1520734074.623 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-11T02:07:54.623Z,1520734074.623 [NAL9602] No Fault, FailCount= 5
2018-03-11T02:07:54.942Z,1520734074.942 [NAL9602](INFO): Powering up NAL9602
2018-03-11T02:08:05.750Z,1520734085.750 [NAL9602](INFO): NAL9602 initialized
2018-03-11T02:08:14.203Z,1520734094.203 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T02:08:14.203Z,1520734094.203 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 24
2018-03-11T02:08:14.203Z,1520734094.203 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T02:08:14.224Z,1520734094.224 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T02:08:14.629Z,1520734094.629 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T02:08:14.629Z,1520734094.629 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 24
2018-03-11T02:08:15.009Z,1520734095.009 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T02:08:15.010Z,1520734095.010 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T02:08:15.010Z,1520734095.010 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T02:09:25.411Z,1520734165.411 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-11T02:04:25.2Z
2018-03-11T02:09:25.411Z,1520734165.411 [Default:CheckIn:Read_GPS] Stopped
2018-03-11T02:09:25.411Z,1520734165.411 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-11T02:09:29.797Z,1520734169.797 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180311T001315/Courier0048.lzma
2018-03-11T02:09:30.598Z,1520734170.598 [DataOverHttps](INFO): Moved sent file to Logs/20180311T001315/Courier0048.lzma.bak
2018-03-11T02:09:30.599Z,1520734170.599 [DataOverHttps](INFO): SBD MOMSN=8010758
2018-03-11T02:09:34.922Z,1520734174.922 [NAL9602](INFO): SBD MO Status=2, MOMSN=5016, MT Status=2, MTMSN=0
2018-03-11T02:09:34.923Z,1520734174.923 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-11T02:09:45.912Z,1520734185.912 [DataOverHttps](INFO): Sending 255 bytes from file Logs/20180311T001315/Express0049.lzma
2018-03-11T02:09:45.918Z,1520734185.918 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-11T02:09:46.829Z,1520734186.829 [DataOverHttps](INFO): Moved sent file to Logs/20180311T001315/Express0049.lzma.bak
2018-03-11T02:09:46.829Z,1520734186.829 [DataOverHttps](INFO): SBD MOMSN=8010761
2018-03-11T02:09:47.552Z,1520734187.552 [Default:CheckIn:Read_Iridium] Stopped
2018-03-11T02:09:47.552Z,1520734187.552 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-11T02:09:47.552Z,1520734187.552 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-11T02:10:16.374Z,1520734216.374 [NAL9602](INFO): Powering down
2018-03-11T02:11:15.243Z,1520734275.243 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T02:11:15.243Z,1520734275.243 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 25
2018-03-11T02:11:15.243Z,1520734275.243 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T02:11:15.272Z,1520734275.272 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T02:11:15.672Z,1520734275.672 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T02:11:15.672Z,1520734275.672 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 25
2018-03-11T02:11:16.046Z,1520734276.046 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T02:11:16.047Z,1520734276.047 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T02:11:16.047Z,1520734276.047 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T02:13:37.002Z,1520734417.002 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-11T02:14:16.291Z,1520734456.291 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T02:14:16.291Z,1520734456.291 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 26
2018-03-11T02:14:16.291Z,1520734456.291 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T02:14:16.303Z,1520734456.303 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T02:14:16.702Z,1520734456.702 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T02:14:16.702Z,1520734456.702 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 26
2018-03-11T02:14:17.080Z,1520734457.080 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T02:14:17.085Z,1520734457.085 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T02:14:17.085Z,1520734457.085 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T02:14:47.888Z,1520734487.888 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-11T02:14:47.888Z,1520734487.888 [Default:CheckIn:C.Wait] Stopped
2018-03-11T02:14:47.888Z,1520734487.888 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-11T02:14:47.888Z,1520734487.888 [Default:CheckIn:D] Running Loop=1
2018-03-11T02:14:48.288Z,1520734488.288 [Default:CheckIn:D] Stopped
2018-03-11T02:14:48.288Z,1520734488.288 [Default:CheckIn:E] Running Loop=1
2018-03-11T02:14:48.681Z,1520734488.681 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 117.276864 min 
2018-03-11T02:14:48.682Z,1520734488.682 [Default:CheckIn:E] Stopped
2018-03-11T02:14:48.682Z,1520734488.682 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-11T02:14:48.682Z,1520734488.682 [Default:CheckIn] Stopped
2018-03-11T02:14:48.682Z,1520734488.682 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-11T02:14:48.682Z,1520734488.682 [Default:CheckIn](INFO): Running loop #13
2018-03-11T02:14:48.682Z,1520734488.682 [Default:CheckIn] Running Loop=13
2018-03-11T02:14:48.682Z,1520734488.682 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-11T02:14:48.682Z,1520734488.682 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-11T02:14:51.880Z,1520734491.880 [NAL9602](INFO): Powering up
2018-03-11T02:15:03.039Z,1520734503.039 [NAL9602](INFO): NAL9602 initialized
2018-03-11T02:15:35.014Z,1520734535.014 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-03-11T02:15:35.089Z,1520734535.089 [NAL9602](FAULT): received: 
+CSQ:1

OK16, 2, 0, 0, 0

OK
2018-03-11T02:15:35.089Z,1520734535.089 [NAL9602] Data Fault, FailCount= 1
2018-03-11T02:15:35.089Z,1520734535.089 [NAL9602](ERROR): Data Fault
2018-03-11T02:15:35.164Z,1520734535.164 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-11T02:15:35.418Z,1520734535.418 [NAL9602](INFO): Powering down
2018-03-11T02:15:36.268Z,1520734536.268 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-11T02:15:36.268Z,1520734536.268 [NAL9602] No Fault, FailCount= 1
2018-03-11T02:16:05.442Z,1520734565.442 [NAL9602](INFO): Powering up NAL9602
2018-03-11T02:16:16.651Z,1520734576.651 [NAL9602](INFO): NAL9602 initialized
2018-03-11T02:17:17.111Z,1520734637.111 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T02:17:17.111Z,1520734637.111 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 27
2018-03-11T02:17:17.111Z,1520734637.111 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T02:17:17.124Z,1520734637.124 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T02:17:17.543Z,1520734637.543 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T02:17:17.544Z,1520734637.544 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 27
2018-03-11T02:17:17.915Z,1520734637.915 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T02:17:17.916Z,1520734637.916 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T02:17:17.916Z,1520734637.916 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T02:18:16.882Z,1520734696.882 [NAL9602](INFO): SBD MO Status=0, MOMSN=5016, MT Status=0, MTMSN=0
2018-03-11T02:18:16.882Z,1520734696.882 [NAL9602](INFO): No messages in MT queue
2018-03-11T02:18:17.674Z,1520734697.674 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-11T02:18:17.674Z,1520734697.674 [NAL9602] Data Fault, FailCount= 1
2018-03-11T02:18:17.674Z,1520734697.674 [NAL9602](ERROR): Data Fault
2018-03-11T02:18:17.769Z,1520734697.769 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-11T02:18:18.071Z,1520734698.071 [NAL9602](INFO): Powering down
2018-03-11T02:18:18.943Z,1520734698.943 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-11T02:18:18.943Z,1520734698.943 [NAL9602] No Fault, FailCount= 1
2018-03-11T02:18:48.471Z,1520734728.471 [NAL9602](INFO): Powering up NAL9602
2018-03-11T02:18:59.298Z,1520734739.298 [NAL9602](INFO): NAL9602 initialized
2018-03-11T02:19:48.956Z,1520734788.956 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-11T02:14:48.7Z
2018-03-11T02:19:48.956Z,1520734788.956 [Default:CheckIn:Read_GPS] Stopped
2018-03-11T02:19:48.956Z,1520734788.956 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-11T02:19:53.061Z,1520734793.061 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180311T001315/Courier0052.lzma
2018-03-11T02:19:53.860Z,1520734793.860 [DataOverHttps](INFO): Moved sent file to Logs/20180311T001315/Courier0052.lzma.bak
2018-03-11T02:19:53.861Z,1520734793.861 [DataOverHttps](INFO): SBD MOMSN=8010830
2018-03-11T02:20:03.954Z,1520734803.954 [DataOverHttps](INFO): Sending 255 bytes from file Logs/20180311T001315/Express0053.lzma
2018-03-11T02:20:04.751Z,1520734804.751 [DataOverHttps](INFO): Moved sent file to Logs/20180311T001315/Express0053.lzma.bak
2018-03-11T02:20:04.751Z,1520734804.751 [DataOverHttps](INFO): SBD MOMSN=8010832
2018-03-11T02:20:05.494Z,1520734805.494 [Default:CheckIn:Read_Iridium] Stopped
2018-03-11T02:20:05.494Z,1520734805.494 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-11T02:20:05.494Z,1520734805.494 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-11T02:20:17.986Z,1520734817.986 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T02:20:17.986Z,1520734817.986 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 28
2018-03-11T02:20:17.986Z,1520734817.986 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T02:20:17.998Z,1520734817.998 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T02:20:18.407Z,1520734818.407 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T02:20:18.407Z,1520734818.407 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 28
2018-03-11T02:20:18.789Z,1520734818.789 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T02:20:18.790Z,1520734818.790 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T02:20:18.790Z,1520734818.790 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T02:20:22.734Z,1520734822.734 [NAL9602](INFO): Powering down
2018-03-11T02:23:18.996Z,1520734998.996 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T02:23:18.996Z,1520734998.996 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 29
2018-03-11T02:23:18.996Z,1520734998.996 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T02:23:19.008Z,1520734999.008 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T02:23:19.407Z,1520734999.407 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T02:23:19.407Z,1520734999.407 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 29
2018-03-11T02:23:19.796Z,1520734999.796 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T02:23:19.796Z,1520734999.796 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T02:23:19.797Z,1520734999.797 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T02:23:37.053Z,1520735017.053 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-11T02:25:05.804Z,1520735105.804 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-11T02:25:05.804Z,1520735105.804 [Default:CheckIn:C.Wait] Stopped
2018-03-11T02:25:05.804Z,1520735105.804 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-11T02:25:05.804Z,1520735105.804 [Default:CheckIn:D] Running Loop=1
2018-03-11T02:25:06.205Z,1520735106.205 [Default:CheckIn:D] Stopped
2018-03-11T02:25:06.205Z,1520735106.205 [Default:CheckIn:E] Running Loop=1
2018-03-11T02:25:06.572Z,1520735106.572 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 127.575480 min 
2018-03-11T02:25:06.572Z,1520735106.572 [Default:CheckIn:E] Stopped
2018-03-11T02:25:06.572Z,1520735106.572 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-11T02:25:06.572Z,1520735106.572 [Default:CheckIn] Stopped
2018-03-11T02:25:06.597Z,1520735106.597 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-11T02:25:06.597Z,1520735106.597 [Default:CheckIn](INFO): Running loop #14
2018-03-11T02:25:06.597Z,1520735106.597 [Default:CheckIn] Running Loop=14
2018-03-11T02:25:06.597Z,1520735106.597 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-11T02:25:06.597Z,1520735106.597 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-11T02:25:10.240Z,1520735110.240 [NAL9602](INFO): Powering up
2018-03-11T02:25:21.423Z,1520735121.423 [NAL9602](INFO): NAL9602 initialized
2018-03-11T02:26:19.901Z,1520735179.901 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T02:26:19.901Z,1520735179.901 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 30
2018-03-11T02:26:19.901Z,1520735179.901 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T02:26:19.914Z,1520735179.914 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T02:26:20.320Z,1520735180.320 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T02:26:20.320Z,1520735180.320 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 30
2018-03-11T02:26:20.708Z,1520735180.708 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T02:26:20.709Z,1520735180.709 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T02:26:20.709Z,1520735180.709 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T02:29:20.872Z,1520735360.872 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T02:29:20.872Z,1520735360.872 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 31
2018-03-11T02:29:20.872Z,1520735360.872 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T02:29:20.901Z,1520735360.901 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T02:29:21.296Z,1520735361.296 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T02:29:21.296Z,1520735361.296 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 31
2018-03-11T02:29:21.670Z,1520735361.670 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T02:29:21.670Z,1520735361.670 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T02:29:21.670Z,1520735361.670 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T02:29:37.619Z,1520735377.619 [NAL9602](INFO): SBD MO Status=0, MOMSN=5017, MT Status=0, MTMSN=0
2018-03-11T02:29:37.620Z,1520735377.620 [NAL9602](INFO): No messages in MT queue
2018-03-11T02:29:38.418Z,1520735378.418 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-11T02:29:38.418Z,1520735378.418 [NAL9602] Data Fault, FailCount= 1
2018-03-11T02:29:38.418Z,1520735378.418 [NAL9602](ERROR): Data Fault
2018-03-11T02:29:38.509Z,1520735378.509 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-11T02:29:38.818Z,1520735378.818 [NAL9602](INFO): Powering down
2018-03-11T02:29:39.716Z,1520735379.716 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-11T02:29:39.716Z,1520735379.716 [NAL9602] No Fault, FailCount= 1
2018-03-11T02:30:06.858Z,1520735406.858 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-11T02:25:06.6Z
2018-03-11T02:30:06.858Z,1520735406.858 [Default:CheckIn:Read_GPS] Stopped
2018-03-11T02:30:06.859Z,1520735406.859 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-11T02:30:12.654Z,1520735412.654 [NAL9602](INFO): Powering up NAL9602
2018-03-11T02:30:13.191Z,1520735413.191 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180311T001315/Courier0056.lzma
2018-03-11T02:30:13.991Z,1520735413.991 [DataOverHttps](INFO): Moved sent file to Logs/20180311T001315/Courier0056.lzma.bak
2018-03-11T02:30:13.992Z,1520735413.992 [DataOverHttps](INFO): SBD MOMSN=8010899
2018-03-11T02:30:27.042Z,1520735427.042 [DataOverHttps](INFO): Sending 163 bytes from file Logs/20180311T001315/Express0057.lzma
2018-03-11T02:30:27.046Z,1520735427.046 [NAL9602](INFO): NAL9602 initialized
2018-03-11T02:30:27.835Z,1520735427.835 [DataOverHttps](INFO): Moved sent file to Logs/20180311T001315/Express0057.lzma.bak
2018-03-11T02:30:27.835Z,1520735427.835 [DataOverHttps](INFO): SBD MOMSN=8010901
2018-03-11T02:30:28.767Z,1520735428.767 [Default:CheckIn:Read_Iridium] Stopped
2018-03-11T02:30:28.767Z,1520735428.767 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-11T02:30:28.767Z,1520735428.767 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-11T02:30:58.230Z,1520735458.230 [NAL9602](INFO): Powering down
2018-03-11T02:31:59.026Z,1520735519.026 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-03-11T02:32:21.875Z,1520735541.875 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T02:32:21.875Z,1520735541.875 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 32
2018-03-11T02:32:21.875Z,1520735541.875 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T02:32:21.887Z,1520735541.887 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T02:32:22.296Z,1520735542.296 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T02:32:22.296Z,1520735542.296 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 32
2018-03-11T02:32:22.679Z,1520735542.679 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T02:32:22.679Z,1520735542.679 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T02:32:22.679Z,1520735542.679 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T02:32:59.826Z,1520735579.826 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-03-11T02:33:36.227Z,1520735616.227 [DataOverHttps](INFO): setting unavailable, lastComms_.elapsed()=180.372742
2018-03-11T02:33:37.089Z,1520735617.089 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-11T02:35:00.629Z,1520735700.629 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-03-11T02:35:23.072Z,1520735723.072 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T02:35:23.072Z,1520735723.072 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 33
2018-03-11T02:35:23.072Z,1520735723.072 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T02:35:23.097Z,1520735723.097 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T02:35:23.516Z,1520735723.516 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T02:35:23.516Z,1520735723.516 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 33
2018-03-11T02:35:23.868Z,1520735723.868 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T02:35:23.868Z,1520735723.868 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T02:35:23.869Z,1520735723.869 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T02:35:29.079Z,1520735729.079 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-11T02:35:29.079Z,1520735729.079 [Default:CheckIn:C.Wait] Stopped
2018-03-11T02:35:29.079Z,1520735729.079 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-11T02:35:29.079Z,1520735729.079 [Default:CheckIn:D] Running Loop=1
2018-03-11T02:35:29.488Z,1520735729.488 [Default:CheckIn:D] Stopped
2018-03-11T02:35:29.488Z,1520735729.488 [Default:CheckIn:E] Running Loop=1
2018-03-11T02:35:29.894Z,1520735729.894 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 137.963525 min 
2018-03-11T02:35:29.895Z,1520735729.895 [Default:CheckIn:E] Stopped
2018-03-11T02:35:29.895Z,1520735729.895 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-11T02:35:29.895Z,1520735729.895 [Default:CheckIn] Stopped
2018-03-11T02:35:29.895Z,1520735729.895 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-11T02:35:29.895Z,1520735729.895 [Default:CheckIn](INFO): Running loop #15
2018-03-11T02:35:29.895Z,1520735729.895 [Default:CheckIn] Running Loop=15
2018-03-11T02:35:29.895Z,1520735729.895 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-11T02:35:29.895Z,1520735729.895 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-11T02:35:30.630Z,1520735730.630 [NAL9602](INFO): Powering up
2018-03-11T02:35:41.434Z,1520735741.434 [NAL9602](INFO): NAL9602 initialized
2018-03-11T02:36:00.626Z,1520735760.626 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-03-11T02:37:46.645Z,1520735866.645 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.002243
2018-03-11T02:38:23.893Z,1520735903.893 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T02:38:23.893Z,1520735903.893 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 34
2018-03-11T02:38:23.893Z,1520735903.893 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T02:38:23.905Z,1520735903.905 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T02:38:24.312Z,1520735904.312 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T02:38:24.312Z,1520735904.312 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 34
2018-03-11T02:38:24.700Z,1520735904.700 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T02:38:24.701Z,1520735904.701 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T02:38:24.701Z,1520735904.701 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T02:40:30.275Z,1520736030.275 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-11T02:35:29.9Z
2018-03-11T02:40:30.275Z,1520736030.275 [Default:CheckIn:Read_GPS] Stopped
2018-03-11T02:40:30.275Z,1520736030.275 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-11T02:40:36.657Z,1520736036.657 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180311T001315/Courier0060.lzma
2018-03-11T02:40:38.255Z,1520736038.255 [DataOverHttps](INFO): Moved sent file to Logs/20180311T001315/Courier0060.lzma.bak
2018-03-11T02:40:38.255Z,1520736038.255 [DataOverHttps](INFO): SBD MOMSN=8010966
2018-03-11T02:40:49.300Z,1520736049.300 [NAL9602](INFO): SBD MO Status=2, MOMSN=5018, MT Status=2, MTMSN=0
2018-03-11T02:40:49.300Z,1520736049.300 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-11T02:40:49.694Z,1520736049.694 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-11T02:40:57.306Z,1520736057.306 [DataOverHttps](INFO): Sending 122 bytes from file Logs/20180311T001315/Express0061.lzma
2018-03-11T02:40:59.295Z,1520736059.295 [DataOverHttps](INFO): Moved sent file to Logs/20180311T001315/Express0061.lzma.bak
2018-03-11T02:40:59.295Z,1520736059.295 [DataOverHttps](INFO): SBD MOMSN=8010968
2018-03-11T02:41:00.029Z,1520736060.029 [Default:CheckIn:Read_Iridium] Stopped
2018-03-11T02:41:00.029Z,1520736060.029 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-11T02:41:00.029Z,1520736060.029 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-11T02:41:20.338Z,1520736080.338 [NAL9602](INFO): Powering down
2018-03-11T02:41:24.803Z,1520736084.803 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T02:41:24.803Z,1520736084.803 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 35
2018-03-11T02:41:24.803Z,1520736084.803 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T02:41:24.820Z,1520736084.820 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T02:41:25.208Z,1520736085.208 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T02:41:25.208Z,1520736085.208 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 35
2018-03-11T02:41:25.582Z,1520736085.582 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T02:41:25.583Z,1520736085.583 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T02:41:25.583Z,1520736085.583 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T02:42:16.715Z,1520736136.715 [DataOverHttps](IMPORTANT): SBD MTMSN=20180311T024214
2018-03-11T02:42:23.167Z,1520736143.167 [DataOverHttps](INFO): Received command:stop
2018-03-11T02:42:23.229Z,1520736143.229 [CommandLine](IMPORTANT): got command stop
2018-03-11T02:42:23.229Z,1520736143.229 [CommandLine](IMPORTANT): Scheduling is paused
2018-03-11T02:43:37.371Z,1520736217.371 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-11T02:44:25.745Z,1520736265.745 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T02:44:25.746Z,1520736265.746 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 36
2018-03-11T02:44:25.746Z,1520736265.746 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T02:44:25.778Z,1520736265.778 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T02:44:26.151Z,1520736266.151 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T02:44:26.151Z,1520736266.151 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 36
2018-03-11T02:44:26.543Z,1520736266.543 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T02:44:26.543Z,1520736266.543 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T02:44:26.544Z,1520736266.544 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T02:46:00.566Z,1520736360.566 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-11T02:46:00.566Z,1520736360.566 [Default:CheckIn:C.Wait] Stopped
2018-03-11T02:46:00.566Z,1520736360.566 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-11T02:46:00.566Z,1520736360.566 [Default:CheckIn:D] Running Loop=1
2018-03-11T02:46:00.958Z,1520736360.958 [Default:CheckIn:D] Stopped
2018-03-11T02:46:00.958Z,1520736360.958 [Default:CheckIn:E] Running Loop=1
2018-03-11T02:46:01.359Z,1520736361.359 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 148.488021 min 
2018-03-11T02:46:01.359Z,1520736361.359 [Default:CheckIn:E] Stopped
2018-03-11T02:46:01.360Z,1520736361.360 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-11T02:46:01.360Z,1520736361.360 [Default:CheckIn] Stopped
2018-03-11T02:46:01.360Z,1520736361.360 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-11T02:46:01.360Z,1520736361.360 [Default:CheckIn](INFO): Running loop #16
2018-03-11T02:46:01.360Z,1520736361.360 [Default:CheckIn] Running Loop=16
2018-03-11T02:46:01.360Z,1520736361.360 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-11T02:46:01.360Z,1520736361.360 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-11T02:46:02.110Z,1520736362.110 [NAL9602](INFO): Powering up
2018-03-11T02:46:13.306Z,1520736373.306 [NAL9602](INFO): NAL9602 initialized
2018-03-11T02:46:14.106Z,1520736374.106 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-11T02:46:14.106Z,1520736374.106 [NAL9602] Data Fault, FailCount= 1
2018-03-11T02:46:14.106Z,1520736374.106 [NAL9602](ERROR): Data Fault
2018-03-11T02:46:14.188Z,1520736374.188 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-11T02:46:14.506Z,1520736374.506 [NAL9602](INFO): Powering down
2018-03-11T02:46:15.357Z,1520736375.357 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-11T02:46:15.357Z,1520736375.357 [NAL9602] No Fault, FailCount= 1
2018-03-11T02:46:44.570Z,1520736404.570 [NAL9602](INFO): Powering up NAL9602
2018-03-11T02:46:55.774Z,1520736415.774 [NAL9602](INFO): NAL9602 initialized
2018-03-11T02:47:26.622Z,1520736446.622 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T02:47:26.622Z,1520736446.622 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 37
2018-03-11T02:47:26.622Z,1520736446.622 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T02:47:26.634Z,1520736446.634 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T02:47:27.057Z,1520736447.057 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T02:47:27.057Z,1520736447.057 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 37
2018-03-11T02:47:27.422Z,1520736447.422 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T02:47:27.422Z,1520736447.422 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T02:47:27.422Z,1520736447.422 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T02:47:40.575Z,1520736460.575 [NAL9602](INFO): SBD MO Status=2, MOMSN=5018, MT Status=2, MTMSN=0
2018-03-11T02:47:40.575Z,1520736460.575 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-11T02:47:53.376Z,1520736473.376 [NAL9602](IMPORTANT): SBD MO Status=0, MOMSN=5018, MT Status=1, MTMSN=1
2018-03-11T02:47:53.377Z,1520736473.377 [NAL9602](INFO): Data available in MT queue
2018-03-11T02:47:54.037Z,1520736474.037 [NAL9602](INFO): Received command:load Science/sci2.xml;set sci2.NeedCommsTime 30 minute;set sci2.Lat1 21.34 degree;set sci2.Lon1 -158.33 degree;set sci2.YoYoMaxDepth 50 meter;set sci2.MaxDepth 100 meter;run 
2018-03-11T02:47:54.049Z,1520736474.049 [CommandLine](IMPORTANT): got command load ./Missions/Science/sci2.xml
2018-03-11T02:47:54.049Z,1520736474.049 [MissionManager](INFO): Loading Mission: ./Missions/Science/sci2.xml
2018-03-11T02:47:54.183Z,1520736474.183 [MissionManager](INFO): DefineArg sci2.MissionTimeout = 2.000000 h
2018-03-11T02:47:54.186Z,1520736474.186 [MissionManager](INFO): DefineArg sci2.NeedCommsTime = 60.000000 min
2018-03-11T02:47:54.189Z,1520736474.189 [MissionManager](INFO): DefineArg sci2.Repeat = 1.000000 count
2018-03-11T02:47:54.191Z,1520736474.191 [MissionManager](INFO): DefineArg sci2.Lat1 = nan arcdeg
2018-03-11T02:47:54.194Z,1520736474.194 [MissionManager](INFO): DefineArg sci2.Lon1 = nan arcdeg
2018-03-11T02:47:54.197Z,1520736474.197 [MissionManager](INFO): DefineArg sci2.Lat2 = nan arcdeg
2018-03-11T02:47:54.199Z,1520736474.199 [MissionManager](INFO): DefineArg sci2.Lon2 = nan arcdeg
2018-03-11T02:47:54.202Z,1520736474.202 [MissionManager](INFO): DefineArg sci2.Lat3 = nan arcdeg
2018-03-11T02:47:54.205Z,1520736474.205 [MissionManager](INFO): DefineArg sci2.Lon3 = nan arcdeg
2018-03-11T02:47:54.207Z,1520736474.207 [MissionManager](INFO): DefineArg sci2.Lat4 = nan arcdeg
2018-03-11T02:47:54.210Z,1520736474.210 [MissionManager](INFO): DefineArg sci2.Lon4 = nan arcdeg
2018-03-11T02:47:54.213Z,1520736474.213 [MissionManager](INFO): DefineArg sci2.Lat5 = nan arcdeg
2018-03-11T02:47:54.215Z,1520736474.215 [MissionManager](INFO): DefineArg sci2.Lon5 = nan arcdeg
2018-03-11T02:47:54.218Z,1520736474.218 [MissionManager](INFO): DefineArg sci2.Lat6 = nan arcdeg
2018-03-11T02:47:54.220Z,1520736474.220 [MissionManager](INFO): DefineArg sci2.Lon6 = nan arcdeg
2018-03-11T02:47:54.256Z,1520736474.256 [MissionManager](INFO): DefineArg sci2.Lat7 = nan arcdeg
2018-03-11T02:47:54.264Z,1520736474.264 [MissionManager](INFO): DefineArg sci2.Lon7 = nan arcdeg
2018-03-11T02:47:54.271Z,1520736474.271 [MissionManager](INFO): DefineArg sci2.Speed = 1.000000 m/s
2018-03-11T02:47:54.274Z,1520736474.274 [MissionManager](INFO): DefineArg sci2.YoYoMinDepth = 2.000000 m
2018-03-11T02:47:54.276Z,1520736474.276 [MissionManager](INFO): DefineArg sci2.YoYoMaxDepth = 200.000000 m
2018-03-11T02:47:54.279Z,1520736474.279 [MissionManager](INFO): DefineArg sci2.YoYoMinAltitude = 9.000000 m
2018-03-11T02:47:54.300Z,1520736474.300 [MissionManager](INFO): DefineArg sci2.YoYoUpPitch = 20.000000 arcdeg
2018-03-11T02:47:54.303Z,1520736474.303 [MissionManager](INFO): DefineArg sci2.YoYoDownPitch = -20.000000 arcdeg
2018-03-11T02:47:54.306Z,1520736474.306 [MissionManager](INFO): DefineArg sci2.BuoyancyNeutral = 220.000002 cc
2018-03-11T02:47:54.326Z,1520736474.326 [MissionManager](INFO): DefineArg sci2.MassDefault = -1.300000 cm
2018-03-11T02:47:54.328Z,1520736474.328 [MissionManager](INFO): DefineArg sci2.MinAltitude = 5.000000 m
2018-03-11T02:47:54.339Z,1520736474.339 [MissionManager](INFO): DefineArg sci2.MaxDepth = 205.000000 m
2018-03-11T02:47:54.367Z,1520736474.367 [MissionManager](INFO): DefineArg sci2.MinOffshore = 2.000000 km
2018-03-11T02:47:54.368Z,1520736474.368 [MissionManager](INFO): Inserting Stack: Missions/Insert/Science.xml
2018-03-11T02:47:58.141Z,1520736478.141 [MissionManager](INFO): DefineArg sci2:Science.SampleISUS = 0 bool
2018-03-11T02:47:58.144Z,1520736478.144 [MissionManager](INFO): DefineArg sci2:Science.SampleISUSmaxPitch = 60.000000 arcdeg
2018-03-11T02:47:58.147Z,1520736478.147 [MissionManager](INFO): DefineArg sci2:Science.SampleISUSminPitch = -60.000000 arcdeg
2018-03-11T02:47:58.149Z,1520736478.149 [MissionManager](INFO): DefineArg sci2:Science.PeakDetectChlActive = 0 bool
2018-03-11T02:47:58.152Z,1520736478.152 [MissionManager](INFO): DefineArg sci2:Science.HighestChlPeakReportActive = 0 bool
2018-03-11T02:47:58.154Z,1520736478.154 [MissionManager](INFO): DefineArg sci2:Science.PatchTracking = 0 bool
2018-03-11T02:47:58.157Z,1520736478.157 [MissionManager](INFO): DefineArg sci2:Science.FilterWidthHorizontal = 3.000000 count
2018-03-11T02:47:58.160Z,1520736478.160 [MissionManager](INFO): DefineArg sci2:Science.NumProfilesSlidingwindow = 100.000000 count
2018-03-11T02:47:58.162Z,1520736478.162 [MissionManager](INFO): DefineArg sci2:Science.PeakDetectNO3Active = 0 bool
2018-03-11T02:47:58.165Z,1520736478.165 [MissionManager](INFO): DefineArg sci2:Science.PeakDetectOilActive = 0 bool
2018-03-11T02:47:58.167Z,1520736478.167 [MissionManager](INFO): DefineArg sci2:Science.UpwardDerivativeOfTemperatureActive = 0 bool
2018-03-11T02:47:58.170Z,1520736478.170 [MissionManager](INFO): DefineArg sci2:Science.EnabledAanderaaO2 = 1.000000 bool
2018-03-11T02:47:58.174Z,1520736478.174 [MissionManager](INFO): DefineArg sci2:Science.EnabledNeilBrown = 0.000000 bool
2018-03-11T02:47:58.177Z,1520736478.177 [MissionManager](INFO): DefineArg sci2:Science.EnabledSeabird = 1.000000 bool
2018-03-11T02:47:58.180Z,1520736478.180 [MissionManager](INFO): DefineArg sci2:Science.EnabledTurbulence_NPS = 0.000000 bool
2018-03-11T02:47:58.183Z,1520736478.183 [MissionManager](INFO): DefineArg sci2:Science.EnabledWetLabsBB2FL = 1.000000 bool
2018-03-11T02:47:58.186Z,1520736478.186 [MissionManager](INFO): DefineArg sci2:Science.EnabledWetLabsSeaOWL_UV_A = 1.000000 bool
2018-03-11T02:47:58.189Z,1520736478.189 [MissionManager](INFO): DefineArg sci2:Science.EnabledISUS = 0.000000 bool
2018-03-11T02:47:58.192Z,1520736478.192 [MissionManager](INFO): DefineArg sci2:Science.LowPassWindowLength = 20.000000 count
2018-03-11T02:47:58.195Z,1520736478.195 [MissionManager](INFO): DefineArg sci2:Science.PeakChlShallowBound = nan m
2018-03-11T02:47:58.198Z,1520736478.198 [MissionManager](INFO): DefineArg sci2:Science.PeakChlDeepBound = nan m
2018-03-11T02:47:58.200Z,1520736478.200 [MissionManager](INFO): DefineOutput sci2:Science.PeakChl = 0.000000 ug/l
2018-03-11T02:47:58.203Z,1520736478.203 [MissionManager](INFO): DefineOutput sci2:Science.PeakChlDepth = 0.000000 m
2018-03-11T02:47:58.206Z,1520736478.206 [MissionManager](INFO): DefineOutput sci2:Science.PeakChlTemperature = 0.000000 degC
2018-03-11T02:47:58.209Z,1520736478.209 [MissionManager](INFO): DefineOutput sci2:Science.PeakChlLatitude = nan arcdeg
2018-03-11T02:47:58.212Z,1520736478.212 [MissionManager](INFO): DefineOutput sci2:Science.PeakChlLongitude = nan arcdeg
2018-03-11T02:47:58.215Z,1520736478.215 [MissionManager](INFO): DefineOutput sci2:Science.PeakNO3 = 0.000000 umol/l
2018-03-11T02:47:58.217Z,1520736478.217 [MissionManager](INFO): DefineOutput sci2:Science.PeakNO3Depth = 0.000000 m
2018-03-11T02:47:58.220Z,1520736478.220 [MissionManager](INFO): DefineOutput sci2:Science.PeakNO3Latitude = nan arcdeg
2018-03-11T02:47:58.223Z,1520736478.223 [MissionManager](INFO): DefineOutput sci2:Science.PeakNO3Longitude = nan arcdeg
2018-03-11T02:47:58.226Z,1520736478.226 [MissionManager](INFO): DefineOutput sci2:Science.PatchChl = 0.000000 m
2018-03-11T02:47:58.229Z,1520736478.229 [MissionManager](INFO): DefineOutput sci2:Science.PatchChlDepth = 0.000000 m
2018-03-11T02:47:58.232Z,1520736478.232 [MissionManager](INFO): DefineOutput sci2:Science.PatchChlLatitude = nan arcdeg
2018-03-11T02:47:58.235Z,1520736478.235 [MissionManager](INFO): DefineOutput sci2:Science.PatchChlLongitude = nan arcdeg
2018-03-11T02:47:58.238Z,1520736478.238 [MissionManager](INFO): DefineOutput sci2:Science.PatchChlDistance = nan arcdeg
2018-03-11T02:47:58.241Z,1520736478.241 [MissionManager](INFO): DefineOutput sci2:Science.PeakOil = 0.000000 kg/m3
2018-03-11T02:47:58.244Z,1520736478.244 [MissionManager](INFO): DefineOutput sci2:Science.PeakOilDepth = 0.000000 m
2018-03-11T02:47:58.246Z,1520736478.246 [MissionManager](INFO): DefineOutput sci2:Science.PeakOilLatitude = nan arcdeg
2018-03-11T02:47:58.249Z,1520736478.249 [MissionManager](INFO): DefineOutput sci2:Science.PeakOilLongitude = nan arcdeg
2018-03-11T02:47:58.265Z,1520736478.265 [sci2:Science:PeakDetectChl:A.PeakDetectVsDepth](DEBUG): Construct PeakDetectVsDepth.
2018-03-11T02:47:58.276Z,1520736478.276 [sci2:Science:HighestChlPeakReport:A.PeakDetectHorizontal](DEBUG): Construct PeakDetectHorizontal.
2018-03-11T02:47:58.288Z,1520736478.288 [sci2:Science:PeakDetectNO3:A.PeakDetectVsDepth](DEBUG): Construct PeakDetectVsDepth.
2018-03-11T02:47:58.296Z,1520736478.296 [sci2:Science:PeakDetectOil:A.PeakDetectVsDepth](DEBUG): Construct PeakDetectVsDepth.
2018-03-11T02:47:58.305Z,1520736478.305 [MissionManager](INFO): RedefineArg sci2:Science.SampleISUS = value:1 bool
2018-03-11T02:47:58.307Z,1520736478.307 [MissionManager](INFO): RedefineArg sci2:Science.PeakDetectChlActive = value:1 bool
2018-03-11T02:47:58.307Z,1520736478.307 [MissionManager](INFO): Inserting Stack: Missions/Insert/NeedComms.xml
2018-03-11T02:48:02.872Z,1520736482.872 [MissionManager](INFO): DefineArg sci2:NeedComms.DiveInterval = 3.000000 h
2018-03-11T02:48:02.875Z,1520736482.875 [MissionManager](INFO): DefineArg sci2:NeedComms.WaitForPitchUp = 10.000000 min
2018-03-11T02:48:02.897Z,1520736482.897 [MissionManager](INFO): DefineArg sci2:NeedComms.SurfacePitch = 20.000000 arcdeg
2018-03-11T02:48:02.900Z,1520736482.900 [MissionManager](INFO): DefineArg sci2:NeedComms.SurfaceDepthRate = nan m/s
2018-03-11T02:48:02.902Z,1520736482.902 [MissionManager](INFO): DefineArg sci2:NeedComms.SurfaceSpeed = 1.000000 m/s
2018-03-11T02:48:02.914Z,1520736482.914 [MissionManager](INFO): DefineArg sci2:NeedComms.GPSTimeout = 7.000000 min
2018-03-11T02:48:02.917Z,1520736482.917 [MissionManager](INFO): DefineArg sci2:NeedComms.CommsTimeout = 30.000000 min
2018-03-11T02:48:02.923Z,1520736482.923 [sci2:NeedComms:B.GoToSurface](DEBUG): Construct GoToSurface.
2018-03-11T02:48:02.973Z,1520736482.973 [MissionManager](INFO): Inserting Stack: Missions/Insert/StandardEnvelopes.xml
2018-03-11T02:48:03.011Z,1520736483.011 [MissionManager](INFO): DefineArg sci2:StandardEnvelopes.MinAltitude = 5.000000 m
2018-03-11T02:48:03.014Z,1520736483.014 [MissionManager](INFO): DefineArg sci2:StandardEnvelopes.MaxDepth = 200.000000 m
2018-03-11T02:48:03.031Z,1520736483.031 [MissionManager](INFO): DefineArg sci2:StandardEnvelopes.MinOffshore = 2000.000000 m
2018-03-11T02:48:03.032Z,1520736483.032 [sci2:StandardEnvelopes:A.AltitudeEnvelope](DEBUG): Construct AltitudeEnvelope.
2018-03-11T02:48:03.040Z,1520736483.040 [sci2:StandardEnvelopes:B.DepthEnvelope](DEBUG): Construct DepthEnvelope.
2018-03-11T02:48:03.060Z,1520736483.060 [sci2:StandardEnvelopes:C.OffshoreEnvelope](DEBUG): Construct OffshoreEnvelope.
2018-03-11T02:48:03.084Z,1520736483.084 [sci2:I.Pitch](DEBUG): Construct.
2018-03-11T02:48:03.110Z,1520736483.110 [sci2:J.Buoyancy](DEBUG): Construct Buoyancy.
2018-03-11T02:48:03.113Z,1520736483.113 [sci2:K.SetSpeed](DEBUG): Construct.
2018-03-11T02:48:03.115Z,1520736483.115 [sci2:L.DepthEnvelope](DEBUG): Construct DepthEnvelope.
2018-03-11T02:48:03.143Z,1520736483.143 [sci2:M.AltitudeEnvelope](DEBUG): Construct AltitudeEnvelope.
2018-03-11T02:48:03.161Z,1520736483.161 [sci2:N.YoYo](DEBUG): Construct YoYo.
2018-03-11T02:48:03.191Z,1520736483.191 [sci2:Lap:Wpt1:A.Waypoint](DEBUG): Construct Waypoint.
2018-03-11T02:48:03.197Z,1520736483.197 [sci2:Lap:Wpt2:A.Waypoint](DEBUG): Construct Waypoint.
2018-03-11T02:48:03.223Z,1520736483.223 [sci2:Lap:Wpt3:A.Waypoint](DEBUG): Construct Waypoint.
2018-03-11T02:48:03.239Z,1520736483.239 [sci2:Lap:Wpt4:A.Waypoint](DEBUG): Construct Waypoint.
2018-03-11T02:48:03.245Z,1520736483.245 [sci2:Lap:Wpt5:A.Waypoint](DEBUG): Construct Waypoint.
2018-03-11T02:48:03.266Z,1520736483.266 [sci2:Lap:Wpt6:A.Waypoint](DEBUG): Construct Waypoint.
2018-03-11T02:48:03.272Z,1520736483.272 [sci2:Lap:Wpt7:A.Waypoint](DEBUG): Construct Waypoint.
2018-03-11T02:48:03.346Z,1520736483.346 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
       xmlns:Control="Tethys/Control"
       xmlns:Guidance="Tethys/Guidance"
       xmlns:Trigger="Tethys/Trigger"
       xmlns:Units="Tethys/Units"
       xmlns:Universal="Tethys/Universal"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
                           Tethys/Control http://okeanids.mbari.org/tethys/Xml/Control.xsd
                           Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
                           Tethys/Trigger http://okeanids.mbari.org/tethys/Xml/Trigger.xsd
                           Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
                           Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
       Id="sci2">

    <Description>
        Vehicle yo-yo's to the specified waypoints, with science turned on.
    </Description>

<!-- Almost every mission should start with an overall timeout and a NeedCommsTime. -->

    <DefineArg Name="MissionTimeout"><Description>
        Maximum duration of mission
    </Description><Units:hour/><Value>2</Value></DefineArg>

    <DefineArg Name="NeedCommsTime"><Description>
        How often to surface for commumications
    </Description><Units:minute/><Value>60</Value></DefineArg>

<!-- You probably need to change these. -->

    <DefineArg Name="Repeat"><Description>
        Number of times the vehicle should try to cycle through waypoints..
    </Description><Units:count/><Value>1</Value></DefineArg>

    <DefineArg Name="Lat1"><Description>
        Latitude of waypoint 1. If nan, waypoint is skipped.
    </Description><Units:degree/><Value>NaN</Value></DefineArg>

    <DefineArg Name="Lon1"><Description>
        Longitude of waypoint 1. If nan, waypoint is skipped.
    </Description><Units:degree/><Value>NaN</Value></DefineArg>

    <DefineArg Name="Lat2"><Description>
        Latitude of waypoint 2. If nan, waypoint is skipped.
    </Description><Units:degree/><Value>NaN</Value></DefineArg>

    <DefineArg Name="Lon2"><Description>
        Longitude of waypoint 2. If nan, waypoint is skipped.
    </Description><Units:degree/><Value>NaN</Value></DefineArg>

    <DefineArg Name="Lat3"><Description>
        Latitude of waypoint 3. If nan, waypoint is skipped.
    </Description><Units:degree/><Value>NaN</Value></DefineArg>

    <DefineArg Name="Lon3"><Description>
        Longitude of waypoint 3. If nan, waypoint is skipped.
    </Description><Units:degree/><Value>NaN</Value></DefineArg>

    <DefineArg Name="Lat4"><Description>
        Latitude of waypoint 4. If nan, waypoint is skipped.
    </Description><Units:degree/><Value>NaN</Value></DefineArg>

    <DefineArg Name="Lon4"><Description>
        Longitude of waypoint 4. If nan, waypoint is skipped.
    </Description><Units:degree/><Value>NaN</Value></DefineArg>

    <DefineArg Name="Lat5"><Description>
        Latitude of waypoint 5. If nan, waypoint is skipped.
    </Description><Units:degree/><Value>NaN</Value></DefineArg>

    <DefineArg Name="Lon5"><Description>
        Longitude of waypoint 5. If nan, waypoint is skipped.
    </Description><Units:degree/><Value>NaN</Value></DefineArg>

    <DefineArg Name="Lat6"><Description>
        Latitude of waypoint 6. If nan, waypoint is skipped.
    </Description><Units:degree/><Value>NaN</Value></DefineArg>

    <DefineArg Name="Lon6"><Description>
        Longitude of waypoint 6. If nan, waypoint is skipped.
    </Description><Units:degree/><Value>NaN</Value></DefineArg>

    <DefineArg Name="Lat7"><Description>
        Latitude of waypoint 7. If nan, waypoint is skipped.
    </Description><Units:degree/><Value>NaN</Value></DefineArg>

    <DefineArg Name="Lon7"><Description>
        Longitude of waypoint 7. If nan, waypoint is skipped.
    </Description><Units:degree/><Value>NaN</Value></DefineArg>

<!-- You probably do not need to change these. -->

    <DefineArg Name="Speed"><Description>
        Speed while performing the YoYo behavior.
    </Description><Units:meter_per_second/><Value>1</Value></DefineArg>

    <DefineArg Name="YoYoMinDepth"><Description>
        Minimum depth while performing the YoYo behavior.
    </Description><Units:meter/><Value>2</Value></DefineArg>

    <DefineArg Name="YoYoMaxDepth"><Description>
        Maximum depth while performing the YoYo behavior.
    </Description><Units:meter/><Value>200</Value></DefineArg>

    <DefineArg Name="YoYoMinAltitude"><Description>
        Minimum altitude while performing the YoYo behavior (for
        bottom-terminated YoYos).
    </Description><Units:meter/><Value>9</Value></DefineArg>

    <DefineArg Name="YoYoUpPitch"><Description>
        Vehicle up pitch while performing the YoYo behavior.
    </Description><Units:degree/><Value>20</Value></DefineArg>

    <DefineArg Name="YoYoDownPitch"><Description>
        Vehicle down pitch while performing the YoYo behavior.
    </Description><Units:degree/><Value>-20</Value></DefineArg>

<!-- You are even less likely to need to change these. -->

    <DefineArg Name="BuoyancyNeutral"><Description>
        Buoyancy bladder position while performing the YoYo behavior. Defaults
        to buoyancyNeutral setting in the Config/Control.cfg file. Set to NaN cc
        for active buoyancy
    </Description><Control:VerticalControl.buoyancyNeutral/></DefineArg>

    <DefineArg Name="MassDefault"><Description>
        Static setting for mass during the mission. Set to NaN mm for active
        mass position
    </Description><Control:VerticalControl.massDefault/></DefineArg>

<!--
    <DefineArg Name="CommsTimeout"><Description>
        Maximum time to try communicating before diving again.
    </Description><Units:minute/><Value>30</Value></DefineArg>
-->

    <DefineArg Name="MinAltitude"><Description>
        Minimum height above the sea floor for the entire mission.
    </Description><Units:meter/><Value>5</Value></DefineArg>

    <DefineArg Name="MaxDepth"><Description>
        Maximum depth for the entire mission.
    </Description><Units:meter/><Value>205</Value></DefineArg>

    <DefineArg Name="MinOffshore"><Description>
        Minimum offshore distance for the entire mission.
    </Description><Units:kilometer/><Value>2</Value></DefineArg>

<!-- Missions should almost always start with a timeout -->

    <Timeout Duration="MissionTimeout"/>

    <Insert Filename="Insert/Science.xml">
        <Description>
            Most missions will run the science sensors. If you don't place this
            aggregate above NeedComms, science instruments get turned off on the
            last upcast and while floating on the surface.
        </Description>
        <RedefineArg Name="SampleISUS"><True/></RedefineArg>
        <RedefineArg Name="PeakDetectChlActive"><True/></RedefineArg>
    </Insert>

<!-- Most missions should use the NeedComms aggregate. -->

    <Insert Filename="Insert/NeedComms.xml" Id="NeedComms"/>

    <Assign><Sequence/><Arg Name="NeedComms:DiveInterval"/><Arg Name="NeedCommsTime"/></Assign>

<!--    <Assign><Sequence/><Arg Name="NeedComms:CommsTimeout"/><Arg Name="CommsTimeout"/></Assign> -->

<!-- Missions should almost always start with standard safety envelopes; most missions should not expose the parameters of these envelopes. -->

    <Insert Filename="Insert/StandardEnvelopes.xml"/>

    <Assign><Sequence/><Arg Name="StandardEnvelopes:MinAltitude"/><Arg Name="MinAltitude"/></Assign>

    <Assign><Sequence/><Arg Name="StandardEnvelopes:MaxDepth"/><Arg Name="MaxDepth"/></Assign>

    <Assign><Sequence/><Arg Name="StandardEnvelopes:MinOffshore"/><Arg Name="MinOffshore"/></Assign>

<!-- Check for additional instructions first. -->

    <Call Id="StartingMission" RefId="NeedComms"/>

<!-- Many missions will keep mass position and buoyancy volume fixed at defaults. -->

    <Guidance:Pitch>
        <Parallel/>
        <Setting><Guidance:Pitch.massPosition/><Arg Name="MassDefault"/></Setting>
    </Guidance:Pitch>

    <Guidance:Buoyancy>
        <Parallel/>
        <Setting><Guidance:Buoyancy.position/><Arg Name="BuoyancyNeutral"/></Setting>
    </Guidance:Buoyancy>

    <Guidance:SetSpeed>
        <Parallel/>
        <Setting><Guidance:SetSpeed.speed/><Arg Name="Speed"/></Setting>
    </Guidance:SetSpeed>

    <Guidance:DepthEnvelope>
        <Description>
            Another depth envelope for the YoYo behavior. This envelope should
            fall within the limits of the standard safety envelopes in
            Insert/StandardEnvelopes.xml in order to avoid commanding high pitch
            angles for depth-terminated YoYos.
        </Description>
        <Parallel/>
        <Setting><Guidance:DepthEnvelope.minDepth/><Arg Name="YoYoMinDepth"/></Setting>
        <Setting><Guidance:DepthEnvelope.maxDepth/><Arg Name="YoYoMaxDepth"/></Setting>
        <Setting><Guidance:DepthEnvelope.downPitch/><Arg Name="YoYoDownPitch"/></Setting>
        <Setting><Guidance:DepthEnvelope.upPitch/><Arg Name="YoYoUpPitch"/></Setting>
    </Guidance:DepthEnvelope>

    <Guidance:AltitudeEnvelope>
        <Description>
            Another altitude envelope for the YoYo behavior. This envelope
            should fall within the limits of the standard safety envelopes in
            Insert/StandardEnvelopes.xml in order to avoid commanding high pitch
            angles for bottom-terminated YoYos.
        </Description>
        <Parallel/>
        <Setting><Guidance:AltitudeEnvelope.minAltitude/><Arg Name="YoYoMinAltitude"/></Setting>
        <Setting><Guidance:AltitudeEnvelope.upPitch/><Arg Name="YoYoUpPitch"/></Setting>
    </Guidance:AltitudeEnvelope>

    <Guidance:YoYo>
        <Parallel/>
        <Setting><Guidance:YoYo.downPitch/><Arg Name="YoYoDownPitch"/></Setting>
        <Setting><Guidance:YoYo.upPitch/><Arg Name="YoYoUpPitch"/></Setting>
    </Guidance:YoYo>

    <Aggregate Id="Lap">

        <Sequence Repeat="Repeat"/>

        <Aggregate Id="Wpt1">

            <Sequence/>

            <Guidance:Waypoint>
                <Sequence/>
                <Setting><Guidance:Waypoint.latitude/><Arg Name="Lat1"/></Setting>
                <Setting><Guidance:Waypoint.longitude/><Arg Name="Lon1"/></Setting>
            </Guidance:Waypoint>

        </Aggregate>

        <Aggregate Id="Wpt2">

            <Sequence/>

            <Guidance:Waypoint>
                <Sequence/>
                <Setting><Guidance:Waypoint.latitude/><Arg Name="Lat2"/></Setting>
                <Setting><Guidance:Waypoint.longitude/><Arg Name="Lon2"/></Setting>
            </Guidance:Waypoint>

        </Aggregate>

        <Aggregate Id="Wpt3">

            <Sequence/>

            <Guidance:Waypoint>
                <Sequence/>
                <Setting><Guidance:Waypoint.latitude/><Arg Name="Lat3"/></Setting>
                <Setting><Guidance:Waypoint.longitude/><Arg Name="Lon3"/></Setting>
            </Guidance:Waypoint>

        </Aggregate>

        <Aggregate Id="Wpt4">

            <Sequence/>

            <Guidance:Waypoint>
                <Sequence/>
                <Setting><Guidance:Waypoint.latitude/><Arg Name="Lat4"/></Setting>
                <Setting><Guidance:Waypoint.longitude/><Arg Name="Lon4"/></Setting>
            </Guidance:Waypoint>

        </Aggregate>

        <Aggregate Id="Wpt5">

            <Sequence/>

            <Guidance:Waypoint>
                <Sequence/>
                <Setting><Guidance:Waypoint.latitude/><Arg Name="Lat5"/></Setting>
                <Setting><Guidance:Waypoint.longitude/><Arg Name="Lon5"/></Setting>
            </Guidance:Waypoint>

        </Aggregate>

        <Aggregate Id="Wpt6">

            <Sequence/>

            <Guidance:Waypoint>
                <Sequence/>
                <Setting><Guidance:Waypoint.latitude/><Arg Name="Lat6"/></Setting>
                <Setting><Guidance:Waypoint.longitude/><Arg Name="Lon6"/></Setting>
            </Guidance:Waypoint>

        </Aggregate>

        <Aggregate Id="Wpt7">

            <Sequence/>

            <Guidance:Waypoint>
                <Sequence/>
                <Setting><Guidance:Waypoint.latitude/><Arg Name="Lat7"/></Setting>
                <Setting><Guidance:Waypoint.longitude/><Arg Name="Lon7"/></Setting>
            </Guidance:Waypoint>

        </Aggregate>

    </Aggregate>

</Mission>


2018-03-11T02:48:03.347Z,1520736483.347 [CommandLine](IMPORTANT): Loaded ./Missions/Science/sci2.xml
2018-03-11T02:48:08.356Z,1520736488.356 [CommandLine](IMPORTANT): got command set sci2.NeedCommsTime 30.000000 minute
2018-03-11T02:48:08.364Z,1520736488.364 [CommandLine](IMPORTANT): got command set sci2.Lat1 21.340000 degree
2018-03-11T02:48:08.364Z,1520736488.364 [CommandLine](IMPORTANT): got command set sci2.Lon1 -158.330002 degree
2018-03-11T02:48:08.365Z,1520736488.365 [CommandLine](IMPORTANT): got command set sci2.YoYoMaxDepth 50.000000 meter
2018-03-11T02:48:08.366Z,1520736488.366 [CommandLine](IMPORTANT): got command set sci2.MaxDepth 100.000000 meter
2018-03-11T02:48:08.366Z,1520736488.366 [CommandLine](IMPORTANT): got command run 
2018-03-11T02:48:08.371Z,1520736488.371 [CommandLine](IMPORTANT): Running 
2018-03-11T02:48:08.462Z,1520736488.462 [Default] Stopped
2018-03-11T02:48:08.462Z,1520736488.462 [Default](DEBUG): Aggregate::uninitialize Default
2018-03-11T02:48:08.462Z,1520736488.462 [Default:B.GoToSurface] Stopped
2018-03-11T02:48:08.462Z,1520736488.462 [Default:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2018-03-11T02:48:08.462Z,1520736488.462 [Default:CheckIn] Stopped
2018-03-11T02:48:08.462Z,1520736488.462 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-11T02:48:08.462Z,1520736488.462 [Default:CheckIn:Read_GPS] Stopped
2018-03-11T02:48:08.463Z,1520736488.463 [MissionManager](IMPORTANT): Started mission sci2
2018-03-11T02:48:08.463Z,1520736488.463 [sci2] Running Loop=1
2018-03-11T02:48:08.463Z,1520736488.463 [sci2](DEBUG): Aggregate::initialize sci2
2018-03-11T02:48:08.463Z,1520736488.463 [sci2:Science] Running Loop=1
2018-03-11T02:48:08.463Z,1520736488.463 [sci2:Science](DEBUG): Aggregate::initialize sci2:Science
2018-03-11T02:48:08.463Z,1520736488.463 [sci2:Science:A] Running Loop=1
2018-03-11T02:48:08.463Z,1520736488.463 [sci2:Science:B] Running Loop=1
2018-03-11T02:48:08.463Z,1520736488.463 [sci2:Science:C] Running Loop=1
2018-03-11T02:48:08.463Z,1520736488.463 [sci2:Science:D] Running Loop=1
2018-03-11T02:48:08.463Z,1520736488.463 [sci2:Science:E] Running Loop=1
2018-03-11T02:48:08.464Z,1520736488.464 [sci2:Science:F] Running Loop=1
2018-03-11T02:48:08.464Z,1520736488.464 [sci2:Science:G] Running Loop=1
2018-03-11T02:48:08.464Z,1520736488.464 [sci2:Science:Read_Oil] Running Loop=1
2018-03-11T02:48:08.464Z,1520736488.464 [sci2:Science:PeakDetectChl] Running Loop=1
2018-03-11T02:48:08.464Z,1520736488.464 [sci2:Science:PeakDetectChl](DEBUG): Aggregate::initialize sci2:Science:PeakDetectChl
2018-03-11T02:48:08.464Z,1520736488.464 [sci2:Science:PeakDetectChl:A.PeakDetectVsDepth] Running Loop=1
2018-03-11T02:48:08.464Z,1520736488.464 [sci2:Science:PeakDetectChl:A.PeakDetectVsDepth](DEBUG): Initialize.
2018-03-11T02:48:08.470Z,1520736488.470 [sci2:Science:HighestChlPeakReport] Running Loop=1
2018-03-11T02:48:08.470Z,1520736488.470 [sci2:Science:HighestChlPeakReport](DEBUG): Aggregate::initialize sci2:Science:HighestChlPeakReport
2018-03-11T02:48:08.471Z,1520736488.471 [sci2:Science:HighestChlPeakReport:A.PeakDetectHorizontal] Running Loop=1
2018-03-11T02:48:08.471Z,1520736488.471 [sci2:Science:HighestChlPeakReport:A.PeakDetectHorizontal](INFO): Initialize.
2018-03-11T02:48:08.471Z,1520736488.471 [sci2:Science:PeakDetectNO3] Running Loop=1
2018-03-11T02:48:08.471Z,1520736488.471 [sci2:Science:PeakDetectNO3](DEBUG): Aggregate::initialize sci2:Science:PeakDetectNO3
2018-03-11T02:48:08.471Z,1520736488.471 [sci2:Science:PeakDetectNO3:A.PeakDetectVsDepth] Running Loop=1
2018-03-11T02:48:08.471Z,1520736488.471 [sci2:Science:PeakDetectNO3:A.PeakDetectVsDepth](DEBUG): Initialize.
2018-03-11T02:48:08.478Z,1520736488.478 [sci2:Science:PeakDetectOil] Running Loop=1
2018-03-11T02:48:08.478Z,1520736488.478 [sci2:Science:PeakDetectOil](DEBUG): Aggregate::initialize sci2:Science:PeakDetectOil
2018-03-11T02:48:08.478Z,1520736488.478 [sci2:Science:PeakDetectOil:A.PeakDetectVsDepth] Running Loop=1
2018-03-11T02:48:08.478Z,1520736488.478 [sci2:Science:PeakDetectOil:A.PeakDetectVsDepth](DEBUG): Initialize.
2018-03-11T02:48:08.482Z,1520736488.482 [sci2:StandardEnvelopes] Running Loop=1
2018-03-11T02:48:08.482Z,1520736488.482 [sci2:StandardEnvelopes](DEBUG): Aggregate::initialize sci2:StandardEnvelopes
2018-03-11T02:48:08.482Z,1520736488.482 [sci2:StandardEnvelopes:A.AltitudeEnvelope] Running Loop=1
2018-03-11T02:48:08.482Z,1520736488.482 [sci2:StandardEnvelopes:A.AltitudeEnvelope](DEBUG): Initialize AltitudeEnvelopeComponent.
2018-03-11T02:48:08.482Z,1520736488.482 [sci2:StandardEnvelopes:B.DepthEnvelope] Running Loop=1
2018-03-11T02:48:08.483Z,1520736488.483 [sci2:StandardEnvelopes:B.DepthEnvelope](DEBUG): Initialize DepthEnvelopeComponent.
2018-03-11T02:48:08.483Z,1520736488.483 [sci2:StandardEnvelopes:C.OffshoreEnvelope] Running Loop=1
2018-03-11T02:48:08.483Z,1520736488.483 [sci2:StandardEnvelopes:C.OffshoreEnvelope](DEBUG): Initialize OffshoreEnvelopeComponent.
2018-03-11T02:48:08.483Z,1520736488.483 [sci2:I.Pitch] Running Loop=1
2018-03-11T02:48:08.483Z,1520736488.483 [sci2:I.Pitch](DEBUG): Initialize.
2018-03-11T02:48:08.484Z,1520736488.484 [sci2:J.Buoyancy] Running Loop=1
2018-03-11T02:48:08.484Z,1520736488.484 [sci2:J.Buoyancy](DEBUG): Initialize Buoyancy Component.
2018-03-11T02:48:08.484Z,1520736488.484 [sci2:K.SetSpeed] Running Loop=1
2018-03-11T02:48:08.484Z,1520736488.484 [sci2:K.SetSpeed](DEBUG): Initialize.
2018-03-11T02:48:08.484Z,1520736488.484 [sci2:L.DepthEnvelope] Running Loop=1
2018-03-11T02:48:08.484Z,1520736488.484 [sci2:L.DepthEnvelope](DEBUG): Initialize DepthEnvelopeComponent.
2018-03-11T02:48:08.493Z,1520736488.493 [sci2:M.AltitudeEnvelope] Running Loop=1
2018-03-11T02:48:08.493Z,1520736488.493 [sci2:M.AltitudeEnvelope](DEBUG): Initialize AltitudeEnvelopeComponent.
2018-03-11T02:48:08.493Z,1520736488.493 [sci2:N.YoYo] Running Loop=1
2018-03-11T02:48:08.493Z,1520736488.493 [sci2:N.YoYo](DEBUG): Initialize YoYoComponent.
2018-03-11T02:48:08.494Z,1520736488.494 [sci2:C] Running Loop=1
2018-03-11T02:48:08.494Z,1520736488.494 [sci2:N.YoYo] Running Loop=1
2018-03-11T02:48:08.503Z,1520736488.503 [sci2:M.AltitudeEnvelope] Running Loop=1
2018-03-11T02:48:08.512Z,1520736488.512 [sci2:L.DepthEnvelope] Running Loop=1
2018-03-11T02:48:08.533Z,1520736488.533 [sci2:K.SetSpeed] Running Loop=1
2018-03-11T02:48:08.546Z,1520736488.546 [sci2:J.Buoyancy] Running Loop=1
2018-03-11T02:48:08.550Z,1520736488.550 [sci2:I.Pitch] Running Loop=1
2018-03-11T02:48:08.562Z,1520736488.562 [sci2:StandardEnvelopes] Running Loop=1
2018-03-11T02:48:08.562Z,1520736488.562 [sci2:StandardEnvelopes:C.OffshoreEnvelope] Running Loop=1
2018-03-11T02:48:08.567Z,1520736488.567 [sci2:StandardEnvelopes:B.DepthEnvelope] Running Loop=1
2018-03-11T02:48:08.576Z,1520736488.576 [sci2:StandardEnvelopes:A.AltitudeEnvelope] Running Loop=1
2018-03-11T02:48:08.590Z,1520736488.590 [sci2:C] Stopped
2018-03-11T02:48:08.590Z,1520736488.590 [sci2:E] Running Loop=1
2018-03-11T02:48:08.590Z,1520736488.590 [sci2:Science] Running Loop=1
2018-03-11T02:48:08.594Z,1520736488.594 [sci2:Science:PeakDetectOil] Stopped
2018-03-11T02:48:08.594Z,1520736488.594 [sci2:Science:PeakDetectOil](DEBUG): Aggregate::uninitialize sci2:Science:PeakDetectOil
2018-03-11T02:48:08.594Z,1520736488.594 [sci2:Science:PeakDetectOil:A.PeakDetectVsDepth] Stopped
2018-03-11T02:48:08.595Z,1520736488.595 [sci2:Science:PeakDetectOil:A.PeakDetectVsDepth](DEBUG): Uninitialize.
2018-03-11T02:48:08.595Z,1520736488.595 [sci2:Science:PeakDetectNO3] Stopped
2018-03-11T02:48:08.595Z,1520736488.595 [sci2:Science:PeakDetectNO3](DEBUG): Aggregate::uninitialize sci2:Science:PeakDetectNO3
2018-03-11T02:48:08.595Z,1520736488.595 [sci2:Science:PeakDetectNO3:A.PeakDetectVsDepth] Stopped
2018-03-11T02:48:08.595Z,1520736488.595 [sci2:Science:PeakDetectNO3:A.PeakDetectVsDepth](DEBUG): Uninitialize.
2018-03-11T02:48:08.595Z,1520736488.595 [sci2:Science:HighestChlPeakReport] Stopped
2018-03-11T02:48:08.595Z,1520736488.595 [sci2:Science:HighestChlPeakReport](DEBUG): Aggregate::uninitialize sci2:Science:HighestChlPeakReport
2018-03-11T02:48:08.595Z,1520736488.595 [sci2:Science:HighestChlPeakReport:A.PeakDetectHorizontal] Stopped
2018-03-11T02:48:08.595Z,1520736488.595 [sci2:Science:HighestChlPeakReport:A.PeakDetectHorizontal](DEBUG): Uninitialize.
2018-03-11T02:48:08.595Z,1520736488.595 [sci2:Science:PeakDetectChl] Running Loop=1
2018-03-11T02:48:08.608Z,1520736488.608 [sci2:Science:Read_Oil] Running Loop=1
2018-03-11T02:48:08.613Z,1520736488.613 [sci2:Science:Read_Oil](DEBUG): Initialize ReadDataComponent to sense mass_concentration_of_petroleum_hydrocarbons_in_sea_water
2018-03-11T02:48:08.614Z,1520736488.614 [sci2:Science:G] Running Loop=1
2018-03-11T02:48:08.615Z,1520736488.615 [sci2:Science:G](DEBUG): Initialize ReadDataComponent to sense mass_concentration_of_chlorophyll_in_sea_water
2018-03-11T02:48:08.616Z,1520736488.616 [sci2:Science:F] Stopped
2018-03-11T02:48:08.616Z,1520736488.616 [sci2:Science:E] Stopped
2018-03-11T02:48:08.616Z,1520736488.616 [sci2:Science:D] Running Loop=1
2018-03-11T02:48:08.618Z,1520736488.618 [sci2:Science:D](DEBUG): Initialize ReadDataComponent to sense CTD_Seabird.sea_water_temperature
2018-03-11T02:48:08.619Z,1520736488.619 [sci2:Science:D](DEBUG): Initialize ReadDataComponent to sense CTD_Seabird.sea_water_salinity
2018-03-11T02:48:08.620Z,1520736488.620 [sci2:Science:C] Running Loop=1
2018-03-11T02:48:08.620Z,1520736488.620 [sci2:Science:C](DEBUG): Initialize ReadDataComponent to sense sea_water_temperature
2018-03-11T02:48:08.629Z,1520736488.629 [sci2:Science:C](DEBUG): Initialize ReadDataComponent to sense sea_water_salinity
2018-03-11T02:48:08.631Z,1520736488.631 [sci2:Science:B] Stopped
2018-03-11T02:48:08.631Z,1520736488.631 [sci2:Science:A] Running Loop=1
2018-03-11T02:48:08.632Z,1520736488.632 [sci2:Science:A](DEBUG): Initialize ReadDataComponent to sense mass_concentration_of_oxygen_in_sea_water
2018-03-11T02:48:08.730Z,1520736488.730 [WetLabsBB2FL](INFO): Opening uart, block timeout 10ths=2
2018-03-11T02:48:08.731Z,1520736488.731 [WetLabsBB2FL](INFO): Powering up
2018-03-11T02:48:08.794Z,1520736488.794 [sci2:E] Stopped
2018-03-11T02:48:08.794Z,1520736488.794 [sci2:F] Running Loop=1
2018-03-11T02:48:08.795Z,1520736488.795 [sci2:NeedComms] Running Loop=1
2018-03-11T02:48:08.795Z,1520736488.795 [sci2:NeedComms](DEBUG): Aggregate::initialize sci2:NeedComms
2018-03-11T02:48:08.795Z,1520736488.795 [sci2:NeedComms:B.GoToSurface] Running Loop=1
2018-03-11T02:48:08.795Z,1520736488.795 [sci2:NeedComms:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2018-03-11T02:48:08.795Z,1520736488.795 [sci2:NeedComms:B.GoToSurface](INFO): Received depth rate setting nan m/s.
2018-03-11T02:48:08.796Z,1520736488.796 [sci2:NeedComms:B.GoToSurface](INFO): Received pitch setting 19.999999 degrees.
2018-03-11T02:48:08.796Z,1520736488.796 [sci2:NeedComms:B.GoToSurface](INFO): Received speed setting 1.000000 m/s.
2018-03-11T02:48:08.805Z,1520736488.805 [sci2:NeedComms:B.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 30.000000 seconds.
2018-03-11T02:48:08.805Z,1520736488.805 [sci2:NeedComms:B.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2018-03-11T02:48:08.806Z,1520736488.806 [sci2:NeedComms:A] Running Loop=1
2018-03-11T02:48:08.811Z,1520736488.811 [sci2:NeedComms:A](INFO): last time_fix was: 1520729829.000000 second since 1970/01/01T00:00:00Z 
2018-03-11T02:48:08.812Z,1520736488.812 [sci2:NeedComms:A] Stopped
2018-03-11T02:48:08.966Z,1520736488.966 [CTD_Seabird](INFO): Initializing
2018-03-11T02:48:08.966Z,1520736488.966 [CTD_Seabird](INFO): Checking LCM
2018-03-11T02:48:08.966Z,1520736488.966 [CTD_Seabird](INFO): LCM OK
2018-03-11T02:48:08.966Z,1520736488.966 [CTD_Seabird](INFO): Powering up
2018-03-11T02:48:09.179Z,1520736489.179 [sci2:F] Stopped
2018-03-11T02:48:09.180Z,1520736489.180 [sci2:G] Running Loop=1
2018-03-11T02:48:09.190Z,1520736489.190 [sci2:NeedComms:C] Running Loop=1
2018-03-11T02:48:09.505Z,1520736489.505 [ThrusterServo](FAULT): getVelocity uart error serial timeout
2018-03-11T02:48:09.505Z,1520736489.505 [ThrusterServo](FAULT): Thruster uart error: serial timeout
2018-03-11T02:48:09.505Z,1520736489.505 [ThrusterServo] Communications Fault, FailCount= 1
2018-03-11T02:48:09.505Z,1520736489.505 [ThrusterServo](ERROR): Communications Fault
2018-03-11T02:48:09.509Z,1520736489.509 [CBIT](ERROR): Communications Fault in component: ThrusterServo
2018-03-11T02:48:09.608Z,1520736489.608 [sci2:G] Stopped
2018-03-11T02:48:09.608Z,1520736489.608 [sci2:StartingMission] Running Loop=1
2018-03-11T02:48:09.613Z,1520736489.613 [sci2:StartingMission](DEBUG): Aggregate::initialize sci2:StartingMission
2018-03-11T02:48:09.615Z,1520736489.615 [sci2:NeedComms:C](DEBUG): Initialize ReadDataComponent to sense time_fix
2018-03-11T02:48:09.762Z,1520736489.762 [ThrusterServo](DEBUG): Uninitialize Thruster Servo.
2018-03-11T02:48:09.762Z,1520736489.762 [ThrusterServo](INFO): Powering down
2018-03-11T02:48:10.690Z,1520736490.690 [CBIT](INFO): Clearing failed state for component ThrusterServo
2018-03-11T02:48:10.690Z,1520736490.690 [ThrusterServo] No Fault, FailCount= 1
2018-03-11T02:48:10.808Z,1520736490.808 [ThrusterServo](DEBUG): Initializing EZServoServo.
2018-03-11T02:48:10.825Z,1520736490.825 [ThrusterServo](DEBUG): Initializing ThrusterServo.
2018-03-11T02:48:14.440Z,1520736494.440 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface
2018-03-11T02:48:14.583Z,1520736494.583 [CTD_Seabird](INFO): Started Seabird LCM interface with command:nohup ./lrauv-framework/onboard/bin/gpctd -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyC6 -b 9600 >& /dev/null &
2018-03-11T02:48:14.585Z,1520736494.585 [CTD_Seabird](INFO): LCM subscribed to channel:ctd_t.seabird-gpctd
2018-03-11T02:48:16.320Z,1520736496.320 [Aanderaa_O2](DEBUG): Error parsing data: 4831F	445		245.183		93.019		23.837		29.927		29.927		39.001		9.073		784.5		671.5		20.5	



2018-03-11T02:48:16.320Z,1520736496.320 [Aanderaa_O2](DEBUG): Error parsing device response
2018-03-11T02:48:17.517Z,1520736497.517 [Aanderaa_O2](DEBUG): Error parsing data: 4831F	445		245.267		93.051		23.837		29.923		29.923		39.001		9.078		786.4		672.4		20.5	



2018-03-11T02:48:17.517Z,1520736497.517 [Aanderaa_O2](DEBUG): Error parsing device response
2018-03-11T02:48:18.717Z,1520736498.717 [Aanderaa_O2](DEBUG): Error parsing data: 4831F	445		245.134		93.001		23.837		29.929		29.929		39.007		9.078		788.4		672.6		20.5	

2018-03-11T02:48:18.717Z,1520736498.717 [Aanderaa_O2](DEBUG): Error parsing device response
2018-03-11T02:48:22.593Z,1520736502.593 [Aanderaa_O2](DEBUG): Error parsing data: 4831F	445		245.061		92.974		23.838		29.933		29.933		39.018		9.085		786.7		669.2		20.4	

2018-03-11T02:48:22.593Z,1520736502.593 [Aanderaa_O2](DEBUG): Error parsing device response
2018-03-11T02:48:30.468Z,1520736510.468 [CTD_Seabird](ERROR): Salinity reading out of range: 15.168239 psu
2018-03-11T02:48:30.470Z,1520736510.470 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:48:31.254Z,1520736511.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.163412 psu
2018-03-11T02:48:31.255Z,1520736511.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:48:32.454Z,1520736512.454 [CTD_Seabird](ERROR): Salinity reading out of range: 15.165359 psu
2018-03-11T02:48:32.456Z,1520736512.456 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:48:33.657Z,1520736513.657 [CTD_Seabird](ERROR): Salinity reading out of range: 15.163217 psu
2018-03-11T02:48:33.658Z,1520736513.658 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:48:34.254Z,1520736514.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.163988 psu
2018-03-11T02:48:34.256Z,1520736514.256 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:48:35.454Z,1520736515.454 [CTD_Seabird](ERROR): Salinity reading out of range: 15.171767 psu
2018-03-11T02:48:35.455Z,1520736515.455 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:48:36.655Z,1520736516.655 [CTD_Seabird](ERROR): Salinity reading out of range: 15.177402 psu
2018-03-11T02:48:36.656Z,1520736516.656 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:48:37.259Z,1520736517.259 [CTD_Seabird](ERROR): Salinity reading out of range: 15.179553 psu
2018-03-11T02:48:37.260Z,1520736517.260 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:48:38.458Z,1520736518.458 [CTD_Seabird](ERROR): Salinity reading out of range: 15.164706 psu
2018-03-11T02:48:38.460Z,1520736518.460 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:48:39.254Z,1520736519.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.147585 psu
2018-03-11T02:48:39.255Z,1520736519.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:48:40.454Z,1520736520.454 [CTD_Seabird](ERROR): Salinity reading out of range: 15.153992 psu
2018-03-11T02:48:40.455Z,1520736520.455 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:48:41.657Z,1520736521.657 [CTD_Seabird](ERROR): Salinity reading out of range: 15.177890 psu
2018-03-11T02:48:41.659Z,1520736521.659 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:48:42.270Z,1520736522.270 [CTD_Seabird](ERROR): Salinity reading out of range: 15.184398 psu
2018-03-11T02:48:42.272Z,1520736522.272 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:48:43.470Z,1520736523.470 [CTD_Seabird](ERROR): Salinity reading out of range: 15.170700 psu
2018-03-11T02:48:43.471Z,1520736523.471 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:48:44.259Z,1520736524.259 [CTD_Seabird](ERROR): Salinity reading out of range: 15.151513 psu
2018-03-11T02:48:44.261Z,1520736524.261 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:48:45.462Z,1520736525.462 [CTD_Seabird](ERROR): Salinity reading out of range: 15.154305 psu
2018-03-11T02:48:45.463Z,1520736525.463 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:48:46.254Z,1520736526.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.170860 psu
2018-03-11T02:48:46.255Z,1520736526.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:48:47.454Z,1520736527.454 [CTD_Seabird](ERROR): Salinity reading out of range: 15.176623 psu
2018-03-11T02:48:47.455Z,1520736527.455 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:48:48.655Z,1520736528.655 [CTD_Seabird](ERROR): Salinity reading out of range: 15.168694 psu
2018-03-11T02:48:48.657Z,1520736528.657 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:48:49.257Z,1520736529.257 [CTD_Seabird](ERROR): Salinity reading out of range: 15.161802 psu
2018-03-11T02:48:49.261Z,1520736529.261 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:48:50.462Z,1520736530.462 [CTD_Seabird](ERROR): Salinity reading out of range: 15.158127 psu
2018-03-11T02:48:50.463Z,1520736530.463 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:48:51.662Z,1520736531.662 [CTD_Seabird](ERROR): Salinity reading out of range: 15.155992 psu
2018-03-11T02:48:51.664Z,1520736531.664 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:48:52.255Z,1520736532.255 [CTD_Seabird](ERROR): Salinity reading out of range: 15.152481 psu
2018-03-11T02:48:52.256Z,1520736532.256 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:48:53.455Z,1520736533.455 [CTD_Seabird](ERROR): Salinity reading out of range: 15.154061 psu
2018-03-11T02:48:53.457Z,1520736533.457 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:48:54.255Z,1520736534.255 [CTD_Seabird](ERROR): Salinity reading out of range: 15.165515 psu
2018-03-11T02:48:54.257Z,1520736534.257 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:48:55.458Z,1520736535.458 [CTD_Seabird](ERROR): Salinity reading out of range: 15.171739 psu
2018-03-11T02:48:55.459Z,1520736535.459 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:48:56.658Z,1520736536.658 [CTD_Seabird](ERROR): Salinity reading out of range: 15.164107 psu
2018-03-11T02:48:56.660Z,1520736536.660 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:48:57.254Z,1520736537.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.147342 psu
2018-03-11T02:48:57.255Z,1520736537.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:48:58.455Z,1520736538.455 [CTD_Seabird](ERROR): Salinity reading out of range: 15.148445 psu
2018-03-11T02:48:58.457Z,1520736538.457 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:48:59.658Z,1520736539.658 [CTD_Seabird](ERROR): Salinity reading out of range: 15.168358 psu
2018-03-11T02:48:59.659Z,1520736539.659 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:00.254Z,1520736540.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.166385 psu
2018-03-11T02:49:00.255Z,1520736540.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:01.462Z,1520736541.462 [CTD_Seabird](ERROR): Salinity reading out of range: 15.162438 psu
2018-03-11T02:49:01.463Z,1520736541.463 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:02.662Z,1520736542.662 [CTD_Seabird](ERROR): Salinity reading out of range: 15.156187 psu
2018-03-11T02:49:02.663Z,1520736542.663 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:03.258Z,1520736543.258 [CTD_Seabird](ERROR): Salinity reading out of range: 15.160070 psu
2018-03-11T02:49:03.260Z,1520736543.260 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:04.460Z,1520736544.460 [CTD_Seabird](ERROR): Salinity reading out of range: 15.176203 psu
2018-03-11T02:49:04.461Z,1520736544.461 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:05.255Z,1520736545.255 [CTD_Seabird](ERROR): Salinity reading out of range: 15.171514 psu
2018-03-11T02:49:05.256Z,1520736545.256 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:06.454Z,1520736546.454 [CTD_Seabird](ERROR): Salinity reading out of range: 15.149622 psu
2018-03-11T02:49:06.455Z,1520736546.455 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:07.654Z,1520736547.654 [CTD_Seabird](ERROR): Salinity reading out of range: 15.160065 psu
2018-03-11T02:49:07.655Z,1520736547.655 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:08.274Z,1520736548.274 [CTD_Seabird](ERROR): Salinity reading out of range: 15.188316 psu
2018-03-11T02:49:08.276Z,1520736548.276 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:09.475Z,1520736549.475 [CTD_Seabird](ERROR): Salinity reading out of range: 15.187311 psu
2018-03-11T02:49:09.476Z,1520736549.476 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:10.256Z,1520736550.256 [CTD_Seabird](ERROR): Salinity reading out of range: 15.166656 psu
2018-03-11T02:49:10.258Z,1520736550.258 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:11.458Z,1520736551.458 [CTD_Seabird](ERROR): Salinity reading out of range: 15.155144 psu
2018-03-11T02:49:11.459Z,1520736551.459 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:12.658Z,1520736552.658 [CTD_Seabird](ERROR): Salinity reading out of range: 15.160632 psu
2018-03-11T02:49:12.659Z,1520736552.659 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:13.282Z,1520736553.282 [CTD_Seabird](ERROR): Salinity reading out of range: 15.164349 psu
2018-03-11T02:49:13.283Z,1520736553.283 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:14.487Z,1520736554.487 [CTD_Seabird](ERROR): Salinity reading out of range: 15.173511 psu
2018-03-11T02:49:14.488Z,1520736554.488 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:15.260Z,1520736555.260 [CTD_Seabird](ERROR): Salinity reading out of range: 15.182582 psu
2018-03-11T02:49:15.270Z,1520736555.270 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:16.475Z,1520736556.475 [CTD_Seabird](ERROR): Salinity reading out of range: 15.181277 psu
2018-03-11T02:49:16.477Z,1520736556.477 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:17.255Z,1520736557.255 [CTD_Seabird](ERROR): Salinity reading out of range: 15.175488 psu
2018-03-11T02:49:17.266Z,1520736557.266 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:18.470Z,1520736558.470 [CTD_Seabird](ERROR): Salinity reading out of range: 15.169329 psu
2018-03-11T02:49:18.471Z,1520736558.471 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:19.258Z,1520736559.258 [CTD_Seabird](ERROR): Salinity reading out of range: 15.169022 psu
2018-03-11T02:49:19.260Z,1520736559.260 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:20.459Z,1520736560.459 [CTD_Seabird](ERROR): Salinity reading out of range: 15.221962 psu
2018-03-11T02:49:20.460Z,1520736560.460 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:21.254Z,1520736561.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.491320 psu
2018-03-11T02:49:21.255Z,1520736561.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:22.455Z,1520736562.455 [CTD_Seabird](ERROR): Salinity reading out of range: 15.199198 psu
2018-03-11T02:49:22.456Z,1520736562.456 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:23.654Z,1520736563.654 [CTD_Seabird](ERROR): Salinity reading out of range: 15.202147 psu
2018-03-11T02:49:23.656Z,1520736563.656 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:24.255Z,1520736564.255 [CTD_Seabird](ERROR): Salinity reading out of range: 15.224282 psu
2018-03-11T02:49:24.257Z,1520736564.257 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:25.466Z,1520736565.466 [CTD_Seabird](ERROR): Salinity reading out of range: 15.418403 psu
2018-03-11T02:49:25.467Z,1520736565.467 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:26.256Z,1520736566.256 [CTD_Seabird](ERROR): Salinity reading out of range: 15.237576 psu
2018-03-11T02:49:26.258Z,1520736566.258 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:27.458Z,1520736567.458 [CTD_Seabird](ERROR): Salinity reading out of range: 15.225291 psu
2018-03-11T02:49:27.460Z,1520736567.460 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:28.659Z,1520736568.659 [CTD_Seabird](ERROR): Salinity reading out of range: 15.196938 psu
2018-03-11T02:49:28.660Z,1520736568.660 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:29.267Z,1520736569.267 [CTD_Seabird](ERROR): Salinity reading out of range: 15.590672 psu
2018-03-11T02:49:29.268Z,1520736569.268 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:30.480Z,1520736570.480 [CTD_Seabird](ERROR): Salinity reading out of range: 15.831848 psu
2018-03-11T02:49:30.481Z,1520736570.481 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:31.264Z,1520736571.264 [CTD_Seabird](ERROR): Salinity reading out of range: 15.843234 psu
2018-03-11T02:49:31.265Z,1520736571.265 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:32.487Z,1520736572.487 [CTD_Seabird](ERROR): Salinity reading out of range: 15.845502 psu
2018-03-11T02:49:32.489Z,1520736572.489 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:33.256Z,1520736573.256 [CTD_Seabird](ERROR): Salinity reading out of range: 15.846749 psu
2018-03-11T02:49:33.266Z,1520736573.266 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:34.474Z,1520736574.474 [CTD_Seabird](ERROR): Salinity reading out of range: 15.843994 psu
2018-03-11T02:49:34.475Z,1520736574.475 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:35.272Z,1520736575.272 [CTD_Seabird](ERROR): Salinity reading out of range: 15.842503 psu
2018-03-11T02:49:35.283Z,1520736575.283 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:36.488Z,1520736576.488 [CTD_Seabird](ERROR): Salinity reading out of range: 15.842477 psu
2018-03-11T02:49:36.489Z,1520736576.489 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:37.284Z,1520736577.284 [CTD_Seabird](ERROR): Salinity reading out of range: 15.840870 psu
2018-03-11T02:49:37.285Z,1520736577.285 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:38.502Z,1520736578.502 [CTD_Seabird](ERROR): Salinity reading out of range: 15.840134 psu
2018-03-11T02:49:38.503Z,1520736578.503 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:39.280Z,1520736579.280 [CTD_Seabird](ERROR): Salinity reading out of range: 15.838965 psu
2018-03-11T02:49:39.281Z,1520736579.281 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:40.494Z,1520736580.494 [CTD_Seabird](ERROR): Salinity reading out of range: 15.836576 psu
2018-03-11T02:49:40.495Z,1520736580.495 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:41.268Z,1520736581.268 [CTD_Seabird](ERROR): Salinity reading out of range: 15.833119 psu
2018-03-11T02:49:41.269Z,1520736581.269 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:42.482Z,1520736582.482 [CTD_Seabird](ERROR): Salinity reading out of range: 15.829138 psu
2018-03-11T02:49:42.483Z,1520736582.483 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:43.254Z,1520736583.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.827041 psu
2018-03-11T02:49:43.255Z,1520736583.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:44.467Z,1520736584.467 [CTD_Seabird](ERROR): Salinity reading out of range: 15.825765 psu
2018-03-11T02:49:44.469Z,1520736584.469 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:45.674Z,1520736585.674 [CTD_Seabird](ERROR): Salinity reading out of range: 15.823725 psu
2018-03-11T02:49:45.676Z,1520736585.676 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:46.255Z,1520736586.255 [CTD_Seabird](ERROR): Salinity reading out of range: 15.820402 psu
2018-03-11T02:49:46.256Z,1520736586.256 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:47.454Z,1520736587.454 [CTD_Seabird](ERROR): Salinity reading out of range: 15.818048 psu
2018-03-11T02:49:47.455Z,1520736587.455 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:48.655Z,1520736588.655 [CTD_Seabird](ERROR): Salinity reading out of range: 15.815989 psu
2018-03-11T02:49:48.657Z,1520736588.657 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:49.258Z,1520736589.258 [CTD_Seabird](ERROR): Salinity reading out of range: 15.814004 psu
2018-03-11T02:49:49.259Z,1520736589.259 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:50.462Z,1520736590.462 [CTD_Seabird](ERROR): Salinity reading out of range: 15.812342 psu
2018-03-11T02:49:50.463Z,1520736590.463 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:51.181Z,1520736591.181 [NAL9602](INFO): GPS fix at 20180311T024948: (21.338031, -158.300374)
2018-03-11T02:49:51.254Z,1520736591.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.810020 psu
2018-03-11T02:49:51.255Z,1520736591.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:51.324Z,1520736591.324 [sci2:NeedComms:C] Stopped
2018-03-11T02:49:51.329Z,1520736591.329 [sci2:NeedComms:D] Running Loop=1
2018-03-11T02:49:51.707Z,1520736591.707 [sci2:NeedComms:D](DEBUG): Initialize ReadDataComponent to sense platform_communications
2018-03-11T02:49:52.466Z,1520736592.466 [CTD_Seabird](ERROR): Salinity reading out of range: 15.808691 psu
2018-03-11T02:49:52.467Z,1520736592.467 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:53.266Z,1520736593.266 [CTD_Seabird](ERROR): Salinity reading out of range: 15.806567 psu
2018-03-11T02:49:53.268Z,1520736593.268 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:54.466Z,1520736594.466 [CTD_Seabird](ERROR): Salinity reading out of range: 15.805427 psu
2018-03-11T02:49:54.469Z,1520736594.469 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:55.671Z,1520736595.671 [CTD_Seabird](ERROR): Salinity reading out of range: 15.804228 psu
2018-03-11T02:49:55.673Z,1520736595.673 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:56.260Z,1520736596.260 [CTD_Seabird](ERROR): Salinity reading out of range: 15.803361 psu
2018-03-11T02:49:56.262Z,1520736596.262 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:57.462Z,1520736597.462 [CTD_Seabird](ERROR): Salinity reading out of range: 15.801475 psu
2018-03-11T02:49:57.464Z,1520736597.464 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:58.254Z,1520736598.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.799706 psu
2018-03-11T02:49:58.255Z,1520736598.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:49:59.454Z,1520736599.454 [CTD_Seabird](ERROR): Salinity reading out of range: 15.798839 psu
2018-03-11T02:49:59.456Z,1520736599.456 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:00.654Z,1520736600.654 [CTD_Seabird](ERROR): Salinity reading out of range: 15.799457 psu
2018-03-11T02:50:00.656Z,1520736600.656 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:01.256Z,1520736601.256 [CTD_Seabird](ERROR): Salinity reading out of range: 15.798992 psu
2018-03-11T02:50:01.259Z,1520736601.259 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:02.462Z,1520736602.462 [CTD_Seabird](ERROR): Salinity reading out of range: 15.797011 psu
2018-03-11T02:50:02.463Z,1520736602.463 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:03.017Z,1520736603.017 [DataOverHttps](INFO): Sending 61 bytes from file Logs/20180311T001315/Courier0064.lzma
2018-03-11T02:50:03.260Z,1520736603.260 [CTD_Seabird](ERROR): Salinity reading out of range: 15.797219 psu
2018-03-11T02:50:03.262Z,1520736603.262 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:03.827Z,1520736603.827 [DataOverHttps](INFO): Moved sent file to Logs/20180311T001315/Courier0064.lzma.bak
2018-03-11T02:50:03.827Z,1520736603.827 [DataOverHttps](INFO): SBD MOMSN=8011064
2018-03-11T02:50:04.468Z,1520736604.468 [CTD_Seabird](ERROR): Salinity reading out of range: 15.796951 psu
2018-03-11T02:50:04.469Z,1520736604.469 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:05.258Z,1520736605.258 [CTD_Seabird](ERROR): Salinity reading out of range: 15.797076 psu
2018-03-11T02:50:05.259Z,1520736605.259 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:06.459Z,1520736606.459 [CTD_Seabird](ERROR): Salinity reading out of range: 15.796093 psu
2018-03-11T02:50:06.460Z,1520736606.460 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:07.662Z,1520736607.662 [CTD_Seabird](ERROR): Salinity reading out of range: 15.795349 psu
2018-03-11T02:50:07.673Z,1520736607.673 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:08.258Z,1520736608.258 [CTD_Seabird](ERROR): Salinity reading out of range: 15.795659 psu
2018-03-11T02:50:08.260Z,1520736608.260 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:09.458Z,1520736609.458 [CTD_Seabird](ERROR): Salinity reading out of range: 15.795689 psu
2018-03-11T02:50:09.459Z,1520736609.459 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:10.658Z,1520736610.658 [CTD_Seabird](ERROR): Salinity reading out of range: 15.795537 psu
2018-03-11T02:50:10.659Z,1520736610.659 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:11.260Z,1520736611.260 [CTD_Seabird](ERROR): Salinity reading out of range: 15.795247 psu
2018-03-11T02:50:11.261Z,1520736611.261 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:12.474Z,1520736612.474 [CTD_Seabird](ERROR): Salinity reading out of range: 15.796201 psu
2018-03-11T02:50:12.475Z,1520736612.475 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:13.256Z,1520736613.256 [CTD_Seabird](ERROR): Salinity reading out of range: 15.796526 psu
2018-03-11T02:50:13.257Z,1520736613.257 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:14.475Z,1520736614.475 [CTD_Seabird](ERROR): Salinity reading out of range: 15.796245 psu
2018-03-11T02:50:14.477Z,1520736614.477 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:15.262Z,1520736615.262 [CTD_Seabird](ERROR): Salinity reading out of range: 15.795806 psu
2018-03-11T02:50:15.264Z,1520736615.264 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:16.467Z,1520736616.467 [CTD_Seabird](ERROR): Salinity reading out of range: 15.795650 psu
2018-03-11T02:50:16.468Z,1520736616.468 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:17.260Z,1520736617.260 [CTD_Seabird](ERROR): Salinity reading out of range: 15.795856 psu
2018-03-11T02:50:17.265Z,1520736617.265 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:18.467Z,1520736618.467 [CTD_Seabird](ERROR): Salinity reading out of range: 15.796715 psu
2018-03-11T02:50:18.470Z,1520736618.470 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:19.258Z,1520736619.258 [CTD_Seabird](ERROR): Salinity reading out of range: 15.797360 psu
2018-03-11T02:50:19.259Z,1520736619.259 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:20.460Z,1520736620.460 [CTD_Seabird](ERROR): Salinity reading out of range: 15.797874 psu
2018-03-11T02:50:20.464Z,1520736620.464 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:20.978Z,1520736620.978 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180311T001315/Courier0068.lzma
2018-03-11T02:50:21.254Z,1520736621.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.799384 psu
2018-03-11T02:50:21.255Z,1520736621.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:21.916Z,1520736621.916 [DataOverHttps](INFO): Moved sent file to Logs/20180311T001315/Courier0068.lzma.bak
2018-03-11T02:50:21.921Z,1520736621.921 [DataOverHttps](INFO): SBD MOMSN=8011067
2018-03-11T02:50:22.466Z,1520736622.466 [CTD_Seabird](ERROR): Salinity reading out of range: 15.801056 psu
2018-03-11T02:50:22.467Z,1520736622.467 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:23.260Z,1520736623.260 [CTD_Seabird](ERROR): Salinity reading out of range: 15.801838 psu
2018-03-11T02:50:23.261Z,1520736623.261 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:23.726Z,1520736623.726 [NAL9602](INFO): Powering down
2018-03-11T02:50:24.470Z,1520736624.470 [CTD_Seabird](ERROR): Salinity reading out of range: 15.805228 psu
2018-03-11T02:50:24.471Z,1520736624.471 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:25.675Z,1520736625.675 [CTD_Seabird](ERROR): Salinity reading out of range: 15.806178 psu
2018-03-11T02:50:25.677Z,1520736625.677 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:26.255Z,1520736626.255 [CTD_Seabird](ERROR): Salinity reading out of range: 15.806794 psu
2018-03-11T02:50:26.256Z,1520736626.256 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:27.454Z,1520736627.454 [CTD_Seabird](ERROR): Salinity reading out of range: 15.806334 psu
2018-03-11T02:50:27.455Z,1520736627.455 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:28.655Z,1520736628.655 [CTD_Seabird](ERROR): Salinity reading out of range: 15.808681 psu
2018-03-11T02:50:28.656Z,1520736628.656 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:29.260Z,1520736629.260 [CTD_Seabird](ERROR): Salinity reading out of range: 15.808962 psu
2018-03-11T02:50:29.261Z,1520736629.261 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:30.462Z,1520736630.462 [CTD_Seabird](ERROR): Salinity reading out of range: 15.809732 psu
2018-03-11T02:50:30.463Z,1520736630.463 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:30.466Z,1520736630.466 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T02:50:30.466Z,1520736630.466 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-03-11T02:50:30.466Z,1520736630.466 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T02:50:30.530Z,1520736630.530 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T02:50:30.814Z,1520736630.814 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T02:50:30.814Z,1520736630.814 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-03-11T02:50:31.081Z,1520736631.081 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T02:50:31.081Z,1520736631.081 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T02:50:31.082Z,1520736631.082 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T02:50:31.255Z,1520736631.255 [CTD_Seabird](ERROR): Salinity reading out of range: 15.811413 psu
2018-03-11T02:50:31.257Z,1520736631.257 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:32.458Z,1520736632.458 [CTD_Seabird](ERROR): Salinity reading out of range: 15.814234 psu
2018-03-11T02:50:32.460Z,1520736632.460 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:33.659Z,1520736633.659 [CTD_Seabird](ERROR): Salinity reading out of range: 15.817910 psu
2018-03-11T02:50:33.660Z,1520736633.660 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:34.254Z,1520736634.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.819106 psu
2018-03-11T02:50:34.255Z,1520736634.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:35.456Z,1520736635.456 [CTD_Seabird](ERROR): Salinity reading out of range: 15.819771 psu
2018-03-11T02:50:35.457Z,1520736635.457 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:36.658Z,1520736636.658 [CTD_Seabird](ERROR): Salinity reading out of range: 15.817236 psu
2018-03-11T02:50:36.659Z,1520736636.659 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:37.181Z,1520736637.181 [DataOverHttps](INFO): Sending 845 bytes from file Logs/20180311T001315/Express0065.lzma
2018-03-11T02:50:37.254Z,1520736637.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.817852 psu
2018-03-11T02:50:37.255Z,1520736637.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:37.971Z,1520736637.971 [DataOverHttps](INFO): Moved sent file to Logs/20180311T001315/Express0065.lzma.bak
2018-03-11T02:50:37.971Z,1520736637.971 [DataOverHttps](INFO): SBD MOMSN=8011069
2018-03-11T02:50:38.457Z,1520736638.457 [CTD_Seabird](ERROR): Salinity reading out of range: 15.816805 psu
2018-03-11T02:50:38.459Z,1520736638.459 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:39.674Z,1520736639.674 [CTD_Seabird](ERROR): Salinity reading out of range: 15.816325 psu
2018-03-11T02:50:39.676Z,1520736639.676 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:40.254Z,1520736640.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.817148 psu
2018-03-11T02:50:40.255Z,1520736640.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:41.454Z,1520736641.454 [CTD_Seabird](ERROR): Salinity reading out of range: 15.818760 psu
2018-03-11T02:50:41.455Z,1520736641.455 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:42.654Z,1520736642.654 [CTD_Seabird](ERROR): Salinity reading out of range: 15.822035 psu
2018-03-11T02:50:42.656Z,1520736642.656 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:43.260Z,1520736643.260 [CTD_Seabird](ERROR): Salinity reading out of range: 15.821874 psu
2018-03-11T02:50:43.261Z,1520736643.261 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:44.465Z,1520736644.465 [CTD_Seabird](ERROR): Salinity reading out of range: 15.822698 psu
2018-03-11T02:50:44.468Z,1520736644.468 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:45.255Z,1520736645.255 [CTD_Seabird](ERROR): Salinity reading out of range: 15.823743 psu
2018-03-11T02:50:45.257Z,1520736645.257 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:46.459Z,1520736646.459 [CTD_Seabird](ERROR): Salinity reading out of range: 15.823390 psu
2018-03-11T02:50:46.460Z,1520736646.460 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:47.661Z,1520736647.661 [CTD_Seabird](ERROR): Salinity reading out of range: 15.822721 psu
2018-03-11T02:50:47.664Z,1520736647.664 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:48.254Z,1520736648.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.822611 psu
2018-03-11T02:50:48.255Z,1520736648.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:49.455Z,1520736649.455 [CTD_Seabird](ERROR): Salinity reading out of range: 15.821816 psu
2018-03-11T02:50:49.456Z,1520736649.456 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:50.658Z,1520736650.658 [CTD_Seabird](ERROR): Salinity reading out of range: 15.822342 psu
2018-03-11T02:50:50.660Z,1520736650.660 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:51.259Z,1520736651.259 [CTD_Seabird](ERROR): Salinity reading out of range: 15.822311 psu
2018-03-11T02:50:51.260Z,1520736651.260 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:52.460Z,1520736652.460 [CTD_Seabird](ERROR): Salinity reading out of range: 15.825362 psu
2018-03-11T02:50:52.464Z,1520736652.464 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:53.254Z,1520736653.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.826301 psu
2018-03-11T02:50:53.255Z,1520736653.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:54.457Z,1520736654.457 [CTD_Seabird](ERROR): Salinity reading out of range: 15.828315 psu
2018-03-11T02:50:54.459Z,1520736654.459 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:55.661Z,1520736655.661 [CTD_Seabird](ERROR): Salinity reading out of range: 15.829783 psu
2018-03-11T02:50:55.666Z,1520736655.666 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:56.254Z,1520736656.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.830499 psu
2018-03-11T02:50:56.255Z,1520736656.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:57.454Z,1520736657.454 [CTD_Seabird](ERROR): Salinity reading out of range: 15.829749 psu
2018-03-11T02:50:57.455Z,1520736657.455 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:58.654Z,1520736658.654 [CTD_Seabird](ERROR): Salinity reading out of range: 15.829141 psu
2018-03-11T02:50:58.656Z,1520736658.656 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:50:59.283Z,1520736659.283 [CTD_Seabird](ERROR): Salinity reading out of range: 15.828370 psu
2018-03-11T02:50:59.284Z,1520736659.284 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:00.483Z,1520736660.483 [CTD_Seabird](ERROR): Salinity reading out of range: 15.827299 psu
2018-03-11T02:51:00.485Z,1520736660.485 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:01.256Z,1520736661.256 [CTD_Seabird](ERROR): Salinity reading out of range: 15.827188 psu
2018-03-11T02:51:01.258Z,1520736661.258 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:02.459Z,1520736662.459 [CTD_Seabird](ERROR): Salinity reading out of range: 15.827044 psu
2018-03-11T02:51:02.460Z,1520736662.460 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:03.661Z,1520736663.661 [CTD_Seabird](ERROR): Salinity reading out of range: 15.827531 psu
2018-03-11T02:51:03.664Z,1520736663.664 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:04.256Z,1520736664.256 [CTD_Seabird](ERROR): Salinity reading out of range: 15.829113 psu
2018-03-11T02:51:04.258Z,1520736664.258 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:05.459Z,1520736665.459 [CTD_Seabird](ERROR): Salinity reading out of range: 15.829993 psu
2018-03-11T02:51:05.461Z,1520736665.461 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:06.255Z,1520736666.255 [CTD_Seabird](ERROR): Salinity reading out of range: 15.832094 psu
2018-03-11T02:51:06.256Z,1520736666.256 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:07.454Z,1520736667.454 [CTD_Seabird](ERROR): Salinity reading out of range: 15.836664 psu
2018-03-11T02:51:07.455Z,1520736667.455 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:08.654Z,1520736668.654 [CTD_Seabird](ERROR): Salinity reading out of range: 15.836923 psu
2018-03-11T02:51:08.656Z,1520736668.656 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:09.254Z,1520736669.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.836143 psu
2018-03-11T02:51:09.255Z,1520736669.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:10.457Z,1520736670.457 [CTD_Seabird](ERROR): Salinity reading out of range: 15.836028 psu
2018-03-11T02:51:10.459Z,1520736670.459 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:11.663Z,1520736671.663 [CTD_Seabird](ERROR): Salinity reading out of range: 15.834350 psu
2018-03-11T02:51:11.684Z,1520736671.684 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:12.254Z,1520736672.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.833588 psu
2018-03-11T02:51:12.255Z,1520736672.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:13.455Z,1520736673.455 [CTD_Seabird](ERROR): Salinity reading out of range: 15.834446 psu
2018-03-11T02:51:13.456Z,1520736673.456 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:14.654Z,1520736674.654 [CTD_Seabird](ERROR): Salinity reading out of range: 15.835373 psu
2018-03-11T02:51:14.656Z,1520736674.656 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:15.258Z,1520736675.258 [CTD_Seabird](ERROR): Salinity reading out of range: 15.838848 psu
2018-03-11T02:51:15.260Z,1520736675.260 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:16.460Z,1520736676.460 [CTD_Seabird](ERROR): Salinity reading out of range: 15.841863 psu
2018-03-11T02:51:16.464Z,1520736676.464 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:17.254Z,1520736677.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.842847 psu
2018-03-11T02:51:17.255Z,1520736677.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:18.457Z,1520736678.457 [CTD_Seabird](ERROR): Salinity reading out of range: 15.843715 psu
2018-03-11T02:51:18.459Z,1520736678.459 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:19.660Z,1520736679.660 [CTD_Seabird](ERROR): Salinity reading out of range: 15.845531 psu
2018-03-11T02:51:19.664Z,1520736679.664 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:20.282Z,1520736680.282 [CTD_Seabird](ERROR): Salinity reading out of range: 15.845652 psu
2018-03-11T02:51:20.283Z,1520736680.283 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:21.483Z,1520736681.483 [CTD_Seabird](ERROR): Salinity reading out of range: 15.846795 psu
2018-03-11T02:51:21.484Z,1520736681.484 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:22.255Z,1520736682.255 [CTD_Seabird](ERROR): Salinity reading out of range: 15.848269 psu
2018-03-11T02:51:22.257Z,1520736682.257 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:23.458Z,1520736683.458 [CTD_Seabird](ERROR): Salinity reading out of range: 15.849880 psu
2018-03-11T02:51:23.459Z,1520736683.459 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:24.658Z,1520736684.658 [CTD_Seabird](ERROR): Salinity reading out of range: 15.850633 psu
2018-03-11T02:51:24.660Z,1520736684.660 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:25.254Z,1520736685.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.854599 psu
2018-03-11T02:51:25.255Z,1520736685.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:26.458Z,1520736686.458 [CTD_Seabird](ERROR): Salinity reading out of range: 15.858301 psu
2018-03-11T02:51:26.459Z,1520736686.459 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:27.660Z,1520736687.660 [CTD_Seabird](ERROR): Salinity reading out of range: 15.859324 psu
2018-03-11T02:51:27.664Z,1520736687.664 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:28.255Z,1520736688.255 [CTD_Seabird](ERROR): Salinity reading out of range: 15.861476 psu
2018-03-11T02:51:28.256Z,1520736688.256 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:29.454Z,1520736689.454 [CTD_Seabird](ERROR): Salinity reading out of range: 15.863883 psu
2018-03-11T02:51:29.455Z,1520736689.455 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:30.663Z,1520736690.663 [CTD_Seabird](ERROR): Salinity reading out of range: 15.869397 psu
2018-03-11T02:51:30.665Z,1520736690.665 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:31.258Z,1520736691.258 [CTD_Seabird](ERROR): Salinity reading out of range: 15.871493 psu
2018-03-11T02:51:31.260Z,1520736691.260 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:32.459Z,1520736692.459 [CTD_Seabird](ERROR): Salinity reading out of range: 15.870392 psu
2018-03-11T02:51:32.463Z,1520736692.463 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:33.254Z,1520736693.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.868983 psu
2018-03-11T02:51:33.255Z,1520736693.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:34.457Z,1520736694.457 [CTD_Seabird](ERROR): Salinity reading out of range: 15.871814 psu
2018-03-11T02:51:34.459Z,1520736694.459 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:35.661Z,1520736695.661 [CTD_Seabird](ERROR): Salinity reading out of range: 15.873515 psu
2018-03-11T02:51:35.666Z,1520736695.666 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:36.258Z,1520736696.258 [CTD_Seabird](ERROR): Salinity reading out of range: 15.872005 psu
2018-03-11T02:51:36.259Z,1520736696.259 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:37.458Z,1520736697.458 [CTD_Seabird](ERROR): Salinity reading out of range: 15.871288 psu
2018-03-11T02:51:37.459Z,1520736697.459 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:38.658Z,1520736698.658 [CTD_Seabird](ERROR): Salinity reading out of range: 15.870705 psu
2018-03-11T02:51:38.659Z,1520736698.659 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:39.259Z,1520736699.259 [CTD_Seabird](ERROR): Salinity reading out of range: 15.872684 psu
2018-03-11T02:51:39.260Z,1520736699.260 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:39.350Z,1520736699.350 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-03-11T02:51:40.460Z,1520736700.460 [CTD_Seabird](ERROR): Salinity reading out of range: 15.875772 psu
2018-03-11T02:51:40.464Z,1520736700.464 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:41.256Z,1520736701.256 [CTD_Seabird](ERROR): Salinity reading out of range: 15.875309 psu
2018-03-11T02:51:41.258Z,1520736701.258 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:42.460Z,1520736702.460 [CTD_Seabird](ERROR): Salinity reading out of range: 15.874112 psu
2018-03-11T02:51:42.462Z,1520736702.462 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:43.255Z,1520736703.255 [CTD_Seabird](ERROR): Salinity reading out of range: 15.875900 psu
2018-03-11T02:51:43.257Z,1520736703.257 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:44.458Z,1520736704.458 [CTD_Seabird](ERROR): Salinity reading out of range: 15.877318 psu
2018-03-11T02:51:44.459Z,1520736704.459 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:45.659Z,1520736705.659 [CTD_Seabird](ERROR): Salinity reading out of range: 15.877817 psu
2018-03-11T02:51:45.661Z,1520736705.661 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:46.254Z,1520736706.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.878887 psu
2018-03-11T02:51:46.255Z,1520736706.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:47.455Z,1520736707.455 [CTD_Seabird](ERROR): Salinity reading out of range: 15.876751 psu
2018-03-11T02:51:47.457Z,1520736707.457 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:48.658Z,1520736708.658 [CTD_Seabird](ERROR): Salinity reading out of range: 15.873653 psu
2018-03-11T02:51:48.659Z,1520736708.659 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:49.254Z,1520736709.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.870998 psu
2018-03-11T02:51:49.255Z,1520736709.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:50.457Z,1520736710.457 [CTD_Seabird](ERROR): Salinity reading out of range: 15.869147 psu
2018-03-11T02:51:50.459Z,1520736710.459 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:51.660Z,1520736711.660 [CTD_Seabird](ERROR): Salinity reading out of range: 15.868828 psu
2018-03-11T02:51:51.664Z,1520736711.664 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:52.256Z,1520736712.256 [CTD_Seabird](ERROR): Salinity reading out of range: 15.867710 psu
2018-03-11T02:51:52.259Z,1520736712.259 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:53.458Z,1520736713.458 [CTD_Seabird](ERROR): Salinity reading out of range: 15.867963 psu
2018-03-11T02:51:53.459Z,1520736713.459 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:54.658Z,1520736714.658 [CTD_Seabird](ERROR): Salinity reading out of range: 15.867892 psu
2018-03-11T02:51:54.660Z,1520736714.660 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:55.259Z,1520736715.259 [CTD_Seabird](ERROR): Salinity reading out of range: 15.868335 psu
2018-03-11T02:51:55.260Z,1520736715.260 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:56.461Z,1520736716.461 [CTD_Seabird](ERROR): Salinity reading out of range: 15.866427 psu
2018-03-11T02:51:56.465Z,1520736716.465 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:57.255Z,1520736717.255 [CTD_Seabird](ERROR): Salinity reading out of range: 15.865577 psu
2018-03-11T02:51:57.256Z,1520736717.256 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:58.460Z,1520736718.460 [CTD_Seabird](ERROR): Salinity reading out of range: 15.863537 psu
2018-03-11T02:51:58.461Z,1520736718.461 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:51:59.255Z,1520736719.255 [CTD_Seabird](ERROR): Salinity reading out of range: 15.861926 psu
2018-03-11T02:51:59.257Z,1520736719.257 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:00.458Z,1520736720.458 [CTD_Seabird](ERROR): Salinity reading out of range: 15.859876 psu
2018-03-11T02:52:00.459Z,1520736720.459 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:01.660Z,1520736721.660 [CTD_Seabird](ERROR): Salinity reading out of range: 15.858925 psu
2018-03-11T02:52:01.661Z,1520736721.661 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:02.256Z,1520736722.256 [CTD_Seabird](ERROR): Salinity reading out of range: 15.860986 psu
2018-03-11T02:52:02.257Z,1520736722.257 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:03.459Z,1520736723.459 [CTD_Seabird](ERROR): Salinity reading out of range: 15.860643 psu
2018-03-11T02:52:03.461Z,1520736723.461 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:04.258Z,1520736724.258 [CTD_Seabird](ERROR): Salinity reading out of range: 15.860365 psu
2018-03-11T02:52:04.259Z,1520736724.259 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:05.458Z,1520736725.458 [CTD_Seabird](ERROR): Salinity reading out of range: 15.859829 psu
2018-03-11T02:52:05.459Z,1520736725.459 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:06.658Z,1520736726.658 [CTD_Seabird](ERROR): Salinity reading out of range: 15.857631 psu
2018-03-11T02:52:06.659Z,1520736726.659 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:07.254Z,1520736727.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.856186 psu
2018-03-11T02:52:07.255Z,1520736727.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:08.455Z,1520736728.455 [CTD_Seabird](ERROR): Salinity reading out of range: 15.855389 psu
2018-03-11T02:52:08.456Z,1520736728.456 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:09.658Z,1520736729.658 [CTD_Seabird](ERROR): Salinity reading out of range: 15.854920 psu
2018-03-11T02:52:09.660Z,1520736729.660 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:09.758Z,1520736729.758 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-03-11T02:52:10.256Z,1520736730.256 [CTD_Seabird](ERROR): Salinity reading out of range: 15.853540 psu
2018-03-11T02:52:10.257Z,1520736730.257 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:11.458Z,1520736731.458 [CTD_Seabird](ERROR): Salinity reading out of range: 15.852017 psu
2018-03-11T02:52:11.459Z,1520736731.459 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:12.658Z,1520736732.658 [CTD_Seabird](ERROR): Salinity reading out of range: 15.854815 psu
2018-03-11T02:52:12.659Z,1520736732.659 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:13.268Z,1520736733.268 [CTD_Seabird](ERROR): Salinity reading out of range: 15.860390 psu
2018-03-11T02:52:13.270Z,1520736733.270 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:14.471Z,1520736734.471 [CTD_Seabird](ERROR): Salinity reading out of range: 15.863269 psu
2018-03-11T02:52:14.473Z,1520736734.473 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:15.254Z,1520736735.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.863581 psu
2018-03-11T02:52:15.255Z,1520736735.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:16.454Z,1520736736.454 [CTD_Seabird](ERROR): Salinity reading out of range: 15.862042 psu
2018-03-11T02:52:16.456Z,1520736736.456 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:17.658Z,1520736737.658 [CTD_Seabird](ERROR): Salinity reading out of range: 15.862636 psu
2018-03-11T02:52:17.660Z,1520736737.660 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:18.255Z,1520736738.255 [CTD_Seabird](ERROR): Salinity reading out of range: 15.861826 psu
2018-03-11T02:52:18.257Z,1520736738.257 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:19.478Z,1520736739.478 [CTD_Seabird](ERROR): Salinity reading out of range: 15.859188 psu
2018-03-11T02:52:19.479Z,1520736739.479 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:20.256Z,1520736740.256 [CTD_Seabird](ERROR): Salinity reading out of range: 15.856791 psu
2018-03-11T02:52:20.266Z,1520736740.266 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:21.466Z,1520736741.466 [CTD_Seabird](ERROR): Salinity reading out of range: 15.855379 psu
2018-03-11T02:52:21.468Z,1520736741.468 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:22.257Z,1520736742.257 [CTD_Seabird](ERROR): Salinity reading out of range: 15.852488 psu
2018-03-11T02:52:22.258Z,1520736742.258 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:23.458Z,1520736743.458 [CTD_Seabird](ERROR): Salinity reading out of range: 15.850274 psu
2018-03-11T02:52:23.459Z,1520736743.459 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:24.658Z,1520736744.658 [CTD_Seabird](ERROR): Salinity reading out of range: 15.849260 psu
2018-03-11T02:52:24.659Z,1520736744.659 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:25.255Z,1520736745.255 [CTD_Seabird](ERROR): Salinity reading out of range: 15.847354 psu
2018-03-11T02:52:25.256Z,1520736745.256 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:26.454Z,1520736746.454 [CTD_Seabird](ERROR): Salinity reading out of range: 15.845790 psu
2018-03-11T02:52:26.455Z,1520736746.455 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:27.654Z,1520736747.654 [CTD_Seabird](ERROR): Salinity reading out of range: 15.844481 psu
2018-03-11T02:52:27.655Z,1520736747.655 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:28.255Z,1520736748.255 [CTD_Seabird](ERROR): Salinity reading out of range: 15.842854 psu
2018-03-11T02:52:28.256Z,1520736748.256 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:29.454Z,1520736749.454 [CTD_Seabird](ERROR): Salinity reading out of range: 15.841864 psu
2018-03-11T02:52:29.455Z,1520736749.455 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:30.654Z,1520736750.654 [CTD_Seabird](ERROR): Salinity reading out of range: 15.840639 psu
2018-03-11T02:52:30.656Z,1520736750.656 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:31.255Z,1520736751.255 [CTD_Seabird](ERROR): Salinity reading out of range: 15.839657 psu
2018-03-11T02:52:31.256Z,1520736751.256 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:32.454Z,1520736752.454 [CTD_Seabird](ERROR): Salinity reading out of range: 15.837451 psu
2018-03-11T02:52:32.455Z,1520736752.455 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:33.658Z,1520736753.658 [CTD_Seabird](ERROR): Salinity reading out of range: 15.834752 psu
2018-03-11T02:52:33.660Z,1520736753.660 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:34.256Z,1520736754.256 [CTD_Seabird](ERROR): Salinity reading out of range: 15.834373 psu
2018-03-11T02:52:34.257Z,1520736754.257 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:35.458Z,1520736755.458 [CTD_Seabird](ERROR): Salinity reading out of range: 15.832763 psu
2018-03-11T02:52:35.459Z,1520736755.459 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:36.658Z,1520736756.658 [CTD_Seabird](ERROR): Salinity reading out of range: 15.829925 psu
2018-03-11T02:52:36.660Z,1520736756.660 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:37.254Z,1520736757.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.829376 psu
2018-03-11T02:52:37.255Z,1520736757.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:38.457Z,1520736758.457 [CTD_Seabird](ERROR): Salinity reading out of range: 15.829645 psu
2018-03-11T02:52:38.460Z,1520736758.460 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:39.659Z,1520736759.659 [CTD_Seabird](ERROR): Salinity reading out of range: 15.830120 psu
2018-03-11T02:52:39.663Z,1520736759.663 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:40.254Z,1520736760.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.830716 psu
2018-03-11T02:52:40.255Z,1520736760.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:40.558Z,1520736760.558 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-03-11T02:52:41.454Z,1520736761.454 [CTD_Seabird](ERROR): Salinity reading out of range: 15.829465 psu
2018-03-11T02:52:41.455Z,1520736761.455 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:42.655Z,1520736762.655 [CTD_Seabird](ERROR): Salinity reading out of range: 15.827068 psu
2018-03-11T02:52:42.657Z,1520736762.657 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:43.259Z,1520736763.260 [CTD_Seabird](ERROR): Salinity reading out of range: 15.829262 psu
2018-03-11T02:52:43.261Z,1520736763.261 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:44.470Z,1520736764.470 [CTD_Seabird](ERROR): Salinity reading out of range: 15.826803 psu
2018-03-11T02:52:44.472Z,1520736764.472 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:45.254Z,1520736765.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.823420 psu
2018-03-11T02:52:45.255Z,1520736765.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:46.457Z,1520736766.457 [CTD_Seabird](ERROR): Salinity reading out of range: 15.820917 psu
2018-03-11T02:52:46.459Z,1520736766.459 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:47.659Z,1520736767.659 [CTD_Seabird](ERROR): Salinity reading out of range: 15.819495 psu
2018-03-11T02:52:47.662Z,1520736767.662 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:48.255Z,1520736768.255 [CTD_Seabird](ERROR): Salinity reading out of range: 15.818163 psu
2018-03-11T02:52:48.257Z,1520736768.257 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:49.458Z,1520736769.458 [CTD_Seabird](ERROR): Salinity reading out of range: 15.819197 psu
2018-03-11T02:52:49.459Z,1520736769.459 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:50.658Z,1520736770.658 [CTD_Seabird](ERROR): Salinity reading out of range: 15.818021 psu
2018-03-11T02:52:50.660Z,1520736770.660 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:51.259Z,1520736771.259 [CTD_Seabird](ERROR): Salinity reading out of range: 15.815339 psu
2018-03-11T02:52:51.260Z,1520736771.260 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:52.460Z,1520736772.460 [CTD_Seabird](ERROR): Salinity reading out of range: 15.812880 psu
2018-03-11T02:52:52.465Z,1520736772.465 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:53.254Z,1520736773.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.815166 psu
2018-03-11T02:52:53.255Z,1520736773.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:54.465Z,1520736774.465 [CTD_Seabird](ERROR): Salinity reading out of range: 15.818213 psu
2018-03-11T02:52:54.467Z,1520736774.467 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:55.670Z,1520736775.670 [CTD_Seabird](ERROR): Salinity reading out of range: 15.816651 psu
2018-03-11T02:52:55.671Z,1520736775.671 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:56.254Z,1520736776.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.814725 psu
2018-03-11T02:52:56.255Z,1520736776.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:57.455Z,1520736777.455 [CTD_Seabird](ERROR): Salinity reading out of range: 15.811716 psu
2018-03-11T02:52:57.456Z,1520736777.456 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:58.654Z,1520736778.654 [CTD_Seabird](ERROR): Salinity reading out of range: 15.810255 psu
2018-03-11T02:52:58.655Z,1520736778.655 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:52:59.260Z,1520736779.260 [CTD_Seabird](ERROR): Salinity reading out of range: 15.809864 psu
2018-03-11T02:52:59.262Z,1520736779.262 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:00.469Z,1520736780.469 [CTD_Seabird](ERROR): Salinity reading out of range: 15.809810 psu
2018-03-11T02:53:00.470Z,1520736780.470 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:01.674Z,1520736781.674 [CTD_Seabird](ERROR): Salinity reading out of range: 15.809205 psu
2018-03-11T02:53:01.679Z,1520736781.679 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:02.013Z,1520736782.013 [DataOverHttps](INFO): Sending 39 bytes from file Logs/20180311T001315/Express0069.lzma
2018-03-11T02:53:02.255Z,1520736782.255 [CTD_Seabird](ERROR): Salinity reading out of range: 15.808965 psu
2018-03-11T02:53:02.257Z,1520736782.257 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:02.811Z,1520736782.811 [DataOverHttps](INFO): Moved sent file to Logs/20180311T001315/Express0069.lzma.bak
2018-03-11T02:53:02.811Z,1520736782.811 [DataOverHttps](INFO): SBD MOMSN=8011090
2018-03-11T02:53:03.458Z,1520736783.458 [CTD_Seabird](ERROR): Salinity reading out of range: 15.811454 psu
2018-03-11T02:53:03.460Z,1520736783.460 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:03.946Z,1520736783.946 [sci2:NeedComms:D] Stopped
2018-03-11T02:53:03.947Z,1520736783.947 [sci2:NeedComms:E] Running Loop=1
2018-03-11T02:53:04.102Z,1520736784.102 [sci2:NeedComms:E](DEBUG): Initialize ReadDataComponent to sense time_fix
2018-03-11T02:53:04.382Z,1520736784.382 [NAL9602](INFO): Powering up
2018-03-11T02:53:04.659Z,1520736784.659 [CTD_Seabird](ERROR): Salinity reading out of range: 15.812591 psu
2018-03-11T02:53:04.660Z,1520736784.660 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:05.263Z,1520736785.263 [CTD_Seabird](ERROR): Salinity reading out of range: 15.812230 psu
2018-03-11T02:53:05.267Z,1520736785.267 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:06.467Z,1520736786.467 [CTD_Seabird](ERROR): Salinity reading out of range: 15.810324 psu
2018-03-11T02:53:06.470Z,1520736786.470 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:07.670Z,1520736787.670 [CTD_Seabird](ERROR): Salinity reading out of range: 15.808133 psu
2018-03-11T02:53:07.672Z,1520736787.672 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:08.254Z,1520736788.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.806181 psu
2018-03-11T02:53:08.255Z,1520736788.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:09.454Z,1520736789.454 [CTD_Seabird](ERROR): Salinity reading out of range: 15.807051 psu
2018-03-11T02:53:09.455Z,1520736789.455 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:10.656Z,1520736790.656 [CTD_Seabird](ERROR): Salinity reading out of range: 15.810054 psu
2018-03-11T02:53:10.657Z,1520736790.657 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:11.254Z,1520736791.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.811225 psu
2018-03-11T02:53:11.255Z,1520736791.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:12.454Z,1520736792.454 [CTD_Seabird](ERROR): Salinity reading out of range: 15.810272 psu
2018-03-11T02:53:12.455Z,1520736792.455 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:13.659Z,1520736793.659 [CTD_Seabird](ERROR): Salinity reading out of range: 15.808960 psu
2018-03-11T02:53:13.660Z,1520736793.660 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:14.254Z,1520736794.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.806983 psu
2018-03-11T02:53:14.255Z,1520736794.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:15.454Z,1520736795.454 [CTD_Seabird](ERROR): Salinity reading out of range: 15.805586 psu
2018-03-11T02:53:15.455Z,1520736795.455 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:15.502Z,1520736795.502 [NAL9602](INFO): NAL9602 initialized
2018-03-11T02:53:16.654Z,1520736796.654 [CTD_Seabird](ERROR): Salinity reading out of range: 15.804954 psu
2018-03-11T02:53:16.655Z,1520736796.655 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:17.254Z,1520736797.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.809643 psu
2018-03-11T02:53:17.255Z,1520736797.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:18.457Z,1520736798.457 [CTD_Seabird](ERROR): Salinity reading out of range: 15.811731 psu
2018-03-11T02:53:18.460Z,1520736798.460 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:19.658Z,1520736799.658 [CTD_Seabird](ERROR): Salinity reading out of range: 15.811068 psu
2018-03-11T02:53:19.662Z,1520736799.662 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:20.254Z,1520736800.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.809265 psu
2018-03-11T02:53:20.255Z,1520736800.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:21.454Z,1520736801.454 [CTD_Seabird](ERROR): Salinity reading out of range: 15.809262 psu
2018-03-11T02:53:21.455Z,1520736801.455 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:22.670Z,1520736802.670 [CTD_Seabird](ERROR): Salinity reading out of range: 15.809009 psu
2018-03-11T02:53:22.671Z,1520736802.671 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:23.263Z,1520736803.263 [CTD_Seabird](ERROR): Salinity reading out of range: 15.808616 psu
2018-03-11T02:53:23.265Z,1520736803.265 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:24.469Z,1520736804.469 [CTD_Seabird](ERROR): Salinity reading out of range: 15.811613 psu
2018-03-11T02:53:24.470Z,1520736804.470 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:25.254Z,1520736805.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.817533 psu
2018-03-11T02:53:25.255Z,1520736805.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:26.457Z,1520736806.457 [CTD_Seabird](ERROR): Salinity reading out of range: 15.818521 psu
2018-03-11T02:53:26.460Z,1520736806.460 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:27.254Z,1520736807.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.818410 psu
2018-03-11T02:53:27.255Z,1520736807.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:28.454Z,1520736808.454 [CTD_Seabird](ERROR): Salinity reading out of range: 15.817817 psu
2018-03-11T02:53:28.455Z,1520736808.455 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:29.658Z,1520736809.658 [CTD_Seabird](ERROR): Salinity reading out of range: 15.817647 psu
2018-03-11T02:53:29.660Z,1520736809.660 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:30.255Z,1520736810.255 [CTD_Seabird](ERROR): Salinity reading out of range: 15.822397 psu
2018-03-11T02:53:30.257Z,1520736810.257 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:31.163Z,1520736811.163 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T02:53:31.163Z,1520736811.163 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-03-11T02:53:31.163Z,1520736811.163 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T02:53:31.208Z,1520736811.208 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T02:53:31.458Z,1520736811.458 [CTD_Seabird](ERROR): Salinity reading out of range: 15.824099 psu
2018-03-11T02:53:31.459Z,1520736811.459 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:31.612Z,1520736811.612 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T02:53:31.612Z,1520736811.612 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-03-11T02:53:31.976Z,1520736811.976 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T02:53:31.981Z,1520736811.981 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T02:53:31.982Z,1520736811.982 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T02:53:32.254Z,1520736812.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.824107 psu
2018-03-11T02:53:32.255Z,1520736812.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:33.454Z,1520736813.454 [CTD_Seabird](ERROR): Salinity reading out of range: 15.824352 psu
2018-03-11T02:53:33.455Z,1520736813.455 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:34.654Z,1520736814.654 [CTD_Seabird](ERROR): Salinity reading out of range: 15.827332 psu
2018-03-11T02:53:34.655Z,1520736814.655 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:35.254Z,1520736815.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.830244 psu
2018-03-11T02:53:35.255Z,1520736815.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:36.455Z,1520736816.455 [CTD_Seabird](ERROR): Salinity reading out of range: 15.829755 psu
2018-03-11T02:53:36.456Z,1520736816.456 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:37.612Z,1520736817.612 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-11T02:53:37.658Z,1520736817.658 [CTD_Seabird](ERROR): Salinity reading out of range: 15.829187 psu
2018-03-11T02:53:37.660Z,1520736817.660 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:38.254Z,1520736818.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.828066 psu
2018-03-11T02:53:38.255Z,1520736818.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:39.454Z,1520736819.454 [CTD_Seabird](ERROR): Salinity reading out of range: 15.832486 psu
2018-03-11T02:53:39.455Z,1520736819.455 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:40.655Z,1520736820.655 [CTD_Seabird](ERROR): Salinity reading out of range: 15.834133 psu
2018-03-11T02:53:40.657Z,1520736820.657 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:41.254Z,1520736821.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.834528 psu
2018-03-11T02:53:41.255Z,1520736821.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:42.458Z,1520736822.458 [CTD_Seabird](ERROR): Salinity reading out of range: 15.835214 psu
2018-03-11T02:53:42.460Z,1520736822.460 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:43.658Z,1520736823.658 [CTD_Seabird](ERROR): Salinity reading out of range: 15.839323 psu
2018-03-11T02:53:43.669Z,1520736823.669 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:44.261Z,1520736824.261 [CTD_Seabird](ERROR): Salinity reading out of range: 15.839378 psu
2018-03-11T02:53:44.262Z,1520736824.262 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:45.462Z,1520736825.462 [CTD_Seabird](ERROR): Salinity reading out of range: 15.839536 psu
2018-03-11T02:53:45.463Z,1520736825.463 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:46.256Z,1520736826.256 [CTD_Seabird](ERROR): Salinity reading out of range: 15.840052 psu
2018-03-11T02:53:46.258Z,1520736826.258 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:47.458Z,1520736827.458 [CTD_Seabird](ERROR): Salinity reading out of range: 15.840816 psu
2018-03-11T02:53:47.459Z,1520736827.459 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:48.660Z,1520736828.660 [CTD_Seabird](ERROR): Salinity reading out of range: 15.843727 psu
2018-03-11T02:53:48.661Z,1520736828.661 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:49.263Z,1520736829.263 [CTD_Seabird](ERROR): Salinity reading out of range: 15.843348 psu
2018-03-11T02:53:49.265Z,1520736829.265 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:50.468Z,1520736830.468 [CTD_Seabird](ERROR): Salinity reading out of range: 15.846386 psu
2018-03-11T02:53:50.470Z,1520736830.470 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:51.256Z,1520736831.256 [CTD_Seabird](ERROR): Salinity reading out of range: 15.846738 psu
2018-03-11T02:53:51.257Z,1520736831.257 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:52.458Z,1520736832.458 [CTD_Seabird](ERROR): Salinity reading out of range: 15.847149 psu
2018-03-11T02:53:52.459Z,1520736832.459 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:53.660Z,1520736833.660 [CTD_Seabird](ERROR): Salinity reading out of range: 15.847372 psu
2018-03-11T02:53:53.662Z,1520736833.662 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:54.256Z,1520736834.256 [CTD_Seabird](ERROR): Salinity reading out of range: 15.847204 psu
2018-03-11T02:53:54.257Z,1520736834.257 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:55.458Z,1520736835.458 [CTD_Seabird](ERROR): Salinity reading out of range: 15.847982 psu
2018-03-11T02:53:55.459Z,1520736835.459 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:56.254Z,1520736836.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.848852 psu
2018-03-11T02:53:56.256Z,1520736836.256 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:57.455Z,1520736837.455 [CTD_Seabird](ERROR): Salinity reading out of range: 15.852007 psu
2018-03-11T02:53:57.457Z,1520736837.457 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:58.658Z,1520736838.658 [CTD_Seabird](ERROR): Salinity reading out of range: 15.852377 psu
2018-03-11T02:53:58.660Z,1520736838.660 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:53:59.254Z,1520736839.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.850993 psu
2018-03-11T02:53:59.255Z,1520736839.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:00.454Z,1520736840.454 [CTD_Seabird](ERROR): Salinity reading out of range: 15.851285 psu
2018-03-11T02:54:00.455Z,1520736840.455 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:01.658Z,1520736841.658 [CTD_Seabird](ERROR): Salinity reading out of range: 15.854299 psu
2018-03-11T02:54:01.660Z,1520736841.660 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:02.254Z,1520736842.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.854272 psu
2018-03-11T02:54:02.255Z,1520736842.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:03.454Z,1520736843.454 [CTD_Seabird](ERROR): Salinity reading out of range: 15.855177 psu
2018-03-11T02:54:03.455Z,1520736843.455 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:04.654Z,1520736844.654 [CTD_Seabird](ERROR): Salinity reading out of range: 15.858018 psu
2018-03-11T02:54:04.655Z,1520736844.655 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:05.254Z,1520736845.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.859048 psu
2018-03-11T02:54:05.255Z,1520736845.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:06.457Z,1520736846.457 [CTD_Seabird](ERROR): Salinity reading out of range: 15.860242 psu
2018-03-11T02:54:06.460Z,1520736846.460 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:07.658Z,1520736847.658 [CTD_Seabird](ERROR): Salinity reading out of range: 15.860473 psu
2018-03-11T02:54:07.661Z,1520736847.661 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:08.264Z,1520736848.264 [CTD_Seabird](ERROR): Salinity reading out of range: 15.860482 psu
2018-03-11T02:54:08.265Z,1520736848.265 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:09.466Z,1520736849.466 [CTD_Seabird](ERROR): Salinity reading out of range: 15.860017 psu
2018-03-11T02:54:09.467Z,1520736849.467 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:10.260Z,1520736850.260 [CTD_Seabird](ERROR): Salinity reading out of range: 15.858423 psu
2018-03-11T02:54:10.261Z,1520736850.261 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:11.463Z,1520736851.463 [CTD_Seabird](ERROR): Salinity reading out of range: 15.858351 psu
2018-03-11T02:54:11.465Z,1520736851.465 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:12.254Z,1520736852.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.858740 psu
2018-03-11T02:54:12.255Z,1520736852.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:13.455Z,1520736853.455 [CTD_Seabird](ERROR): Salinity reading out of range: 15.858994 psu
2018-03-11T02:54:13.457Z,1520736853.457 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:14.659Z,1520736854.659 [CTD_Seabird](ERROR): Salinity reading out of range: 15.859193 psu
2018-03-11T02:54:14.660Z,1520736854.660 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:15.304Z,1520736855.304 [CTD_Seabird](ERROR): Salinity reading out of range: 15.860723 psu
2018-03-11T02:54:15.305Z,1520736855.305 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:16.508Z,1520736856.508 [CTD_Seabird](ERROR): Salinity reading out of range: 15.863201 psu
2018-03-11T02:54:16.509Z,1520736856.509 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:17.256Z,1520736857.256 [CTD_Seabird](ERROR): Salinity reading out of range: 15.863096 psu
2018-03-11T02:54:17.257Z,1520736857.257 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:18.459Z,1520736858.459 [CTD_Seabird](ERROR): Salinity reading out of range: 15.863351 psu
2018-03-11T02:54:18.460Z,1520736858.460 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:19.663Z,1520736859.663 [CTD_Seabird](ERROR): Salinity reading out of range: 15.863212 psu
2018-03-11T02:54:19.664Z,1520736859.664 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:20.255Z,1520736860.255 [CTD_Seabird](ERROR): Salinity reading out of range: 15.865541 psu
2018-03-11T02:54:20.256Z,1520736860.256 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:21.454Z,1520736861.454 [CTD_Seabird](ERROR): Salinity reading out of range: 15.867099 psu
2018-03-11T02:54:21.455Z,1520736861.455 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:22.655Z,1520736862.655 [CTD_Seabird](ERROR): Salinity reading out of range: 15.865335 psu
2018-03-11T02:54:22.658Z,1520736862.658 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:23.259Z,1520736863.259 [CTD_Seabird](ERROR): Salinity reading out of range: 15.863517 psu
2018-03-11T02:54:23.264Z,1520736863.264 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:24.462Z,1520736864.462 [CTD_Seabird](ERROR): Salinity reading out of range: 15.863542 psu
2018-03-11T02:54:24.463Z,1520736864.463 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:25.254Z,1520736865.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.863130 psu
2018-03-11T02:54:25.255Z,1520736865.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:26.454Z,1520736866.454 [CTD_Seabird](ERROR): Salinity reading out of range: 15.862516 psu
2018-03-11T02:54:26.455Z,1520736866.455 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:27.654Z,1520736867.654 [CTD_Seabird](ERROR): Salinity reading out of range: 15.861050 psu
2018-03-11T02:54:27.655Z,1520736867.655 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:28.255Z,1520736868.255 [CTD_Seabird](ERROR): Salinity reading out of range: 15.859212 psu
2018-03-11T02:54:28.257Z,1520736868.257 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:29.458Z,1520736869.458 [CTD_Seabird](ERROR): Salinity reading out of range: 15.858689 psu
2018-03-11T02:54:29.459Z,1520736869.459 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:30.666Z,1520736870.666 [CTD_Seabird](ERROR): Salinity reading out of range: 15.859079 psu
2018-03-11T02:54:30.667Z,1520736870.667 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:31.254Z,1520736871.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.860061 psu
2018-03-11T02:54:31.255Z,1520736871.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:32.454Z,1520736872.454 [CTD_Seabird](ERROR): Salinity reading out of range: 15.860635 psu
2018-03-11T02:54:32.456Z,1520736872.456 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:33.658Z,1520736873.658 [CTD_Seabird](ERROR): Salinity reading out of range: 15.859186 psu
2018-03-11T02:54:33.660Z,1520736873.660 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:34.254Z,1520736874.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.857417 psu
2018-03-11T02:54:34.255Z,1520736874.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:35.454Z,1520736875.454 [CTD_Seabird](ERROR): Salinity reading out of range: 15.857341 psu
2018-03-11T02:54:35.455Z,1520736875.455 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:36.657Z,1520736876.657 [CTD_Seabird](ERROR): Salinity reading out of range: 15.857985 psu
2018-03-11T02:54:36.658Z,1520736876.658 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:37.266Z,1520736877.266 [CTD_Seabird](ERROR): Salinity reading out of range: 15.858300 psu
2018-03-11T02:54:37.268Z,1520736877.268 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:38.467Z,1520736878.467 [CTD_Seabird](ERROR): Salinity reading out of range: 15.857116 psu
2018-03-11T02:54:38.468Z,1520736878.468 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:39.260Z,1520736879.260 [CTD_Seabird](ERROR): Salinity reading out of range: 15.856178 psu
2018-03-11T02:54:39.261Z,1520736879.261 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:40.462Z,1520736880.462 [CTD_Seabird](ERROR): Salinity reading out of range: 15.856138 psu
2018-03-11T02:54:40.463Z,1520736880.463 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:41.662Z,1520736881.662 [CTD_Seabird](ERROR): Salinity reading out of range: 15.857162 psu
2018-03-11T02:54:41.663Z,1520736881.663 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:42.254Z,1520736882.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.858246 psu
2018-03-11T02:54:42.255Z,1520736882.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:43.454Z,1520736883.454 [CTD_Seabird](ERROR): Salinity reading out of range: 15.859692 psu
2018-03-11T02:54:43.455Z,1520736883.455 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:44.654Z,1520736884.654 [CTD_Seabird](ERROR): Salinity reading out of range: 15.859235 psu
2018-03-11T02:54:44.655Z,1520736884.655 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:45.272Z,1520736885.272 [CTD_Seabird](ERROR): Salinity reading out of range: 15.859281 psu
2018-03-11T02:54:45.273Z,1520736885.273 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:46.474Z,1520736886.474 [CTD_Seabird](ERROR): Salinity reading out of range: 15.858577 psu
2018-03-11T02:54:46.475Z,1520736886.475 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:47.257Z,1520736887.257 [CTD_Seabird](ERROR): Salinity reading out of range: 15.860038 psu
2018-03-11T02:54:47.259Z,1520736887.259 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:48.459Z,1520736888.459 [CTD_Seabird](ERROR): Salinity reading out of range: 15.863353 psu
2018-03-11T02:54:48.460Z,1520736888.460 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:49.661Z,1520736889.661 [CTD_Seabird](ERROR): Salinity reading out of range: 15.865059 psu
2018-03-11T02:54:49.662Z,1520736889.662 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:50.257Z,1520736890.257 [CTD_Seabird](ERROR): Salinity reading out of range: 15.864468 psu
2018-03-11T02:54:50.259Z,1520736890.259 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:51.458Z,1520736891.458 [CTD_Seabird](ERROR): Salinity reading out of range: 15.863487 psu
2018-03-11T02:54:51.459Z,1520736891.459 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:52.659Z,1520736892.659 [CTD_Seabird](ERROR): Salinity reading out of range: 15.864316 psu
2018-03-11T02:54:52.661Z,1520736892.661 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:53.272Z,1520736893.272 [CTD_Seabird](ERROR): Salinity reading out of range: 15.870375 psu
2018-03-11T02:54:53.273Z,1520736893.273 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:54.474Z,1520736894.474 [CTD_Seabird](ERROR): Salinity reading out of range: 15.871310 psu
2018-03-11T02:54:54.475Z,1520736894.475 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:55.256Z,1520736895.256 [CTD_Seabird](ERROR): Salinity reading out of range: 15.871090 psu
2018-03-11T02:54:55.257Z,1520736895.257 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:56.458Z,1520736896.458 [CTD_Seabird](ERROR): Salinity reading out of range: 15.870357 psu
2018-03-11T02:54:56.459Z,1520736896.459 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:57.661Z,1520736897.661 [CTD_Seabird](ERROR): Salinity reading out of range: 15.871231 psu
2018-03-11T02:54:57.662Z,1520736897.662 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:58.259Z,1520736898.259 [CTD_Seabird](ERROR): Salinity reading out of range: 15.871649 psu
2018-03-11T02:54:58.260Z,1520736898.260 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:54:59.458Z,1520736899.458 [CTD_Seabird](ERROR): Salinity reading out of range: 15.871336 psu
2018-03-11T02:54:59.459Z,1520736899.459 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:00.658Z,1520736900.658 [CTD_Seabird](ERROR): Salinity reading out of range: 15.870303 psu
2018-03-11T02:55:00.659Z,1520736900.659 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:01.261Z,1520736901.261 [CTD_Seabird](ERROR): Salinity reading out of range: 15.871042 psu
2018-03-11T02:55:01.263Z,1520736901.263 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:02.466Z,1520736902.466 [CTD_Seabird](ERROR): Salinity reading out of range: 15.870486 psu
2018-03-11T02:55:02.467Z,1520736902.467 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:03.260Z,1520736903.260 [CTD_Seabird](ERROR): Salinity reading out of range: 15.869124 psu
2018-03-11T02:55:03.262Z,1520736903.262 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:04.464Z,1520736904.464 [CTD_Seabird](ERROR): Salinity reading out of range: 15.868778 psu
2018-03-11T02:55:04.467Z,1520736904.467 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:05.263Z,1520736905.263 [CTD_Seabird](ERROR): Salinity reading out of range: 15.873591 psu
2018-03-11T02:55:05.267Z,1520736905.267 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:06.466Z,1520736906.466 [CTD_Seabird](ERROR): Salinity reading out of range: 15.874903 psu
2018-03-11T02:55:06.467Z,1520736906.467 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:07.677Z,1520736907.677 [CTD_Seabird](ERROR): Salinity reading out of range: 15.874847 psu
2018-03-11T02:55:07.678Z,1520736907.678 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:08.254Z,1520736908.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.874485 psu
2018-03-11T02:55:08.255Z,1520736908.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:09.454Z,1520736909.454 [CTD_Seabird](ERROR): Salinity reading out of range: 15.875356 psu
2018-03-11T02:55:09.456Z,1520736909.456 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:10.655Z,1520736910.655 [CTD_Seabird](ERROR): Salinity reading out of range: 15.874281 psu
2018-03-11T02:55:10.656Z,1520736910.656 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:11.254Z,1520736911.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.872791 psu
2018-03-11T02:55:11.255Z,1520736911.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:12.454Z,1520736912.454 [CTD_Seabird](ERROR): Salinity reading out of range: 15.870555 psu
2018-03-11T02:55:12.455Z,1520736912.455 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:13.658Z,1520736913.658 [CTD_Seabird](ERROR): Salinity reading out of range: 15.872092 psu
2018-03-11T02:55:13.661Z,1520736913.661 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:14.259Z,1520736914.259 [CTD_Seabird](ERROR): Salinity reading out of range: 15.873243 psu
2018-03-11T02:55:14.260Z,1520736914.260 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:15.458Z,1520736915.458 [CTD_Seabird](ERROR): Salinity reading out of range: 15.873194 psu
2018-03-11T02:55:15.459Z,1520736915.459 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:16.658Z,1520736916.658 [CTD_Seabird](ERROR): Salinity reading out of range: 15.872683 psu
2018-03-11T02:55:16.659Z,1520736916.659 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:17.254Z,1520736917.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.875089 psu
2018-03-11T02:55:17.255Z,1520736917.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:18.458Z,1520736918.458 [CTD_Seabird](ERROR): Salinity reading out of range: 15.875606 psu
2018-03-11T02:55:18.461Z,1520736918.461 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:19.254Z,1520736919.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.875024 psu
2018-03-11T02:55:19.255Z,1520736919.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:20.454Z,1520736920.454 [CTD_Seabird](ERROR): Salinity reading out of range: 15.875127 psu
2018-03-11T02:55:20.455Z,1520736920.455 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:21.659Z,1520736921.659 [CTD_Seabird](ERROR): Salinity reading out of range: 15.877190 psu
2018-03-11T02:55:21.661Z,1520736921.661 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:22.256Z,1520736922.256 [CTD_Seabird](ERROR): Salinity reading out of range: 15.875944 psu
2018-03-11T02:55:22.257Z,1520736922.257 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:23.458Z,1520736923.458 [CTD_Seabird](ERROR): Salinity reading out of range: 15.875531 psu
2018-03-11T02:55:23.459Z,1520736923.459 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:24.659Z,1520736924.659 [CTD_Seabird](ERROR): Salinity reading out of range: 15.877525 psu
2018-03-11T02:55:24.661Z,1520736924.661 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:25.254Z,1520736925.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.879282 psu
2018-03-11T02:55:25.255Z,1520736925.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:26.457Z,1520736926.457 [CTD_Seabird](ERROR): Salinity reading out of range: 15.880610 psu
2018-03-11T02:55:26.460Z,1520736926.460 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:27.658Z,1520736927.658 [CTD_Seabird](ERROR): Salinity reading out of range: 15.879154 psu
2018-03-11T02:55:27.660Z,1520736927.660 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:28.269Z,1520736928.269 [CTD_Seabird](ERROR): Salinity reading out of range: 15.878892 psu
2018-03-11T02:55:28.270Z,1520736928.270 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:29.474Z,1520736929.474 [CTD_Seabird](ERROR): Salinity reading out of range: 15.880005 psu
2018-03-11T02:55:29.476Z,1520736929.476 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:30.258Z,1520736930.258 [CTD_Seabird](ERROR): Salinity reading out of range: 15.881111 psu
2018-03-11T02:55:30.260Z,1520736930.260 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:31.458Z,1520736931.458 [CTD_Seabird](ERROR): Salinity reading out of range: 15.880385 psu
2018-03-11T02:55:31.459Z,1520736931.459 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:32.658Z,1520736932.658 [CTD_Seabird](ERROR): Salinity reading out of range: 15.879713 psu
2018-03-11T02:55:32.659Z,1520736932.659 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:33.254Z,1520736933.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.880466 psu
2018-03-11T02:55:33.255Z,1520736933.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:34.459Z,1520736934.459 [CTD_Seabird](ERROR): Salinity reading out of range: 15.881782 psu
2018-03-11T02:55:34.461Z,1520736934.461 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:35.255Z,1520736935.255 [CTD_Seabird](ERROR): Salinity reading out of range: 15.882723 psu
2018-03-11T02:55:35.257Z,1520736935.257 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:36.466Z,1520736936.466 [CTD_Seabird](ERROR): Salinity reading out of range: 15.884585 psu
2018-03-11T02:55:36.467Z,1520736936.467 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:37.666Z,1520736937.666 [CTD_Seabird](ERROR): Salinity reading out of range: 15.887874 psu
2018-03-11T02:55:37.667Z,1520736937.667 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:38.254Z,1520736938.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.888458 psu
2018-03-11T02:55:38.256Z,1520736938.256 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:39.455Z,1520736939.455 [CTD_Seabird](ERROR): Salinity reading out of range: 15.888591 psu
2018-03-11T02:55:39.456Z,1520736939.456 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:40.654Z,1520736940.654 [CTD_Seabird](ERROR): Salinity reading out of range: 15.888155 psu
2018-03-11T02:55:40.655Z,1520736940.655 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:41.272Z,1520736941.272 [CTD_Seabird](ERROR): Salinity reading out of range: 15.888786 psu
2018-03-11T02:55:41.273Z,1520736941.273 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:42.474Z,1520736942.474 [CTD_Seabird](ERROR): Salinity reading out of range: 15.889731 psu
2018-03-11T02:55:42.475Z,1520736942.475 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:43.258Z,1520736943.258 [CTD_Seabird](ERROR): Salinity reading out of range: 15.889618 psu
2018-03-11T02:55:43.259Z,1520736943.259 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:44.458Z,1520736944.458 [CTD_Seabird](ERROR): Salinity reading out of range: 15.889197 psu
2018-03-11T02:55:44.459Z,1520736944.459 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:45.661Z,1520736945.661 [CTD_Seabird](ERROR): Salinity reading out of range: 15.889127 psu
2018-03-11T02:55:45.663Z,1520736945.663 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:46.271Z,1520736946.271 [CTD_Seabird](ERROR): Salinity reading out of range: 15.889217 psu
2018-03-11T02:55:46.277Z,1520736946.277 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:47.478Z,1520736947.478 [CTD_Seabird](ERROR): Salinity reading out of range: 15.888993 psu
2018-03-11T02:55:47.479Z,1520736947.479 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:48.257Z,1520736948.257 [CTD_Seabird](ERROR): Salinity reading out of range: 15.888509 psu
2018-03-11T02:55:48.259Z,1520736948.259 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:49.458Z,1520736949.458 [CTD_Seabird](ERROR): Salinity reading out of range: 15.889469 psu
2018-03-11T02:55:49.459Z,1520736949.459 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:50.658Z,1520736950.658 [CTD_Seabird](ERROR): Salinity reading out of range: 15.890306 psu
2018-03-11T02:55:50.659Z,1520736950.659 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:51.255Z,1520736951.255 [CTD_Seabird](ERROR): Salinity reading out of range: 15.889877 psu
2018-03-11T02:55:51.257Z,1520736951.257 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:52.459Z,1520736952.459 [CTD_Seabird](ERROR): Salinity reading out of range: 15.888797 psu
2018-03-11T02:55:52.460Z,1520736952.460 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:53.661Z,1520736953.661 [CTD_Seabird](ERROR): Salinity reading out of range: 15.889061 psu
2018-03-11T02:55:53.662Z,1520736953.662 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:54.254Z,1520736954.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.892072 psu
2018-03-11T02:55:54.255Z,1520736954.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:55.455Z,1520736955.455 [CTD_Seabird](ERROR): Salinity reading out of range: 15.894244 psu
2018-03-11T02:55:55.457Z,1520736955.457 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:56.658Z,1520736956.658 [CTD_Seabird](ERROR): Salinity reading out of range: 15.894813 psu
2018-03-11T02:55:56.660Z,1520736956.659 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:57.254Z,1520736957.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.894055 psu
2018-03-11T02:55:57.255Z,1520736957.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:58.457Z,1520736958.457 [CTD_Seabird](ERROR): Salinity reading out of range: 15.893744 psu
2018-03-11T02:55:58.460Z,1520736958.460 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:55:59.659Z,1520736959.659 [CTD_Seabird](ERROR): Salinity reading out of range: 15.894533 psu
2018-03-11T02:55:59.662Z,1520736959.662 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:00.259Z,1520736960.259 [CTD_Seabird](ERROR): Salinity reading out of range: 15.894530 psu
2018-03-11T02:56:00.261Z,1520736960.261 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:01.462Z,1520736961.462 [CTD_Seabird](ERROR): Salinity reading out of range: 15.894955 psu
2018-03-11T02:56:01.463Z,1520736961.463 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:02.256Z,1520736962.256 [CTD_Seabird](ERROR): Salinity reading out of range: 15.896139 psu
2018-03-11T02:56:02.257Z,1520736962.257 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:03.461Z,1520736963.461 [CTD_Seabird](ERROR): Salinity reading out of range: 15.896237 psu
2018-03-11T02:56:03.463Z,1520736963.463 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:04.662Z,1520736964.662 [CTD_Seabird](ERROR): Salinity reading out of range: 15.896882 psu
2018-03-11T02:56:04.664Z,1520736964.664 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:05.257Z,1520736965.257 [CTD_Seabird](ERROR): Salinity reading out of range: 15.897231 psu
2018-03-11T02:56:05.259Z,1520736965.259 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:06.462Z,1520736966.462 [CTD_Seabird](ERROR): Salinity reading out of range: 15.901356 psu
2018-03-11T02:56:06.464Z,1520736966.464 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:07.256Z,1520736967.256 [CTD_Seabird](ERROR): Salinity reading out of range: 15.901576 psu
2018-03-11T02:56:07.258Z,1520736967.258 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:08.458Z,1520736968.458 [CTD_Seabird](ERROR): Salinity reading out of range: 15.901473 psu
2018-03-11T02:56:08.459Z,1520736968.459 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:09.661Z,1520736969.661 [CTD_Seabird](ERROR): Salinity reading out of range: 15.901476 psu
2018-03-11T02:56:09.662Z,1520736969.662 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:10.254Z,1520736970.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.901908 psu
2018-03-11T02:56:10.255Z,1520736970.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:11.455Z,1520736971.455 [CTD_Seabird](ERROR): Salinity reading out of range: 15.901405 psu
2018-03-11T02:56:11.456Z,1520736971.456 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:12.658Z,1520736972.658 [CTD_Seabird](ERROR): Salinity reading out of range: 15.900819 psu
2018-03-11T02:56:12.660Z,1520736972.660 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:13.256Z,1520736973.256 [CTD_Seabird](ERROR): Salinity reading out of range: 15.901590 psu
2018-03-11T02:56:13.257Z,1520736973.257 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:14.461Z,1520736974.461 [CTD_Seabird](ERROR): Salinity reading out of range: 15.902686 psu
2018-03-11T02:56:14.462Z,1520736974.462 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:15.254Z,1520736975.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.905218 psu
2018-03-11T02:56:15.255Z,1520736975.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:16.454Z,1520736976.454 [CTD_Seabird](ERROR): Salinity reading out of range: 15.907060 psu
2018-03-11T02:56:16.455Z,1520736976.455 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:17.661Z,1520736977.661 [CTD_Seabird](ERROR): Salinity reading out of range: 15.905960 psu
2018-03-11T02:56:17.663Z,1520736977.663 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:18.254Z,1520736978.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.904425 psu
2018-03-11T02:56:18.255Z,1520736978.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:19.457Z,1520736979.457 [CTD_Seabird](ERROR): Salinity reading out of range: 15.903796 psu
2018-03-11T02:56:19.459Z,1520736979.459 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:20.658Z,1520736980.658 [CTD_Seabird](ERROR): Salinity reading out of range: 15.903851 psu
2018-03-11T02:56:20.659Z,1520736980.659 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:21.255Z,1520736981.255 [CTD_Seabird](ERROR): Salinity reading out of range: 15.907238 psu
2018-03-11T02:56:21.257Z,1520736981.257 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:22.462Z,1520736982.462 [CTD_Seabird](ERROR): Salinity reading out of range: 15.907622 psu
2018-03-11T02:56:22.463Z,1520736982.463 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:23.254Z,1520736983.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.907151 psu
2018-03-11T02:56:23.255Z,1520736983.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:24.454Z,1520736984.454 [CTD_Seabird](ERROR): Salinity reading out of range: 15.907750 psu
2018-03-11T02:56:24.455Z,1520736984.455 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:25.658Z,1520736985.658 [CTD_Seabird](ERROR): Salinity reading out of range: 15.909393 psu
2018-03-11T02:56:25.681Z,1520736985.681 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:26.254Z,1520736986.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.913544 psu
2018-03-11T02:56:26.255Z,1520736986.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:27.454Z,1520736987.454 [CTD_Seabird](ERROR): Salinity reading out of range: 15.915492 psu
2018-03-11T02:56:27.456Z,1520736987.456 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:28.656Z,1520736988.656 [CTD_Seabird](ERROR): Salinity reading out of range: 15.916444 psu
2018-03-11T02:56:28.659Z,1520736988.659 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:29.254Z,1520736989.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.915430 psu
2018-03-11T02:56:29.255Z,1520736989.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:30.457Z,1520736990.457 [CTD_Seabird](ERROR): Salinity reading out of range: 15.914505 psu
2018-03-11T02:56:30.485Z,1520736990.485 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:31.254Z,1520736991.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.917248 psu
2018-03-11T02:56:31.255Z,1520736991.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:32.312Z,1520736992.312 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-11T02:56:32.312Z,1520736992.312 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-03-11T02:56:32.312Z,1520736992.312 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-11T02:56:32.346Z,1520736992.346 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-11T02:56:32.455Z,1520736992.455 [CTD_Seabird](ERROR): Salinity reading out of range: 15.917747 psu
2018-03-11T02:56:32.457Z,1520736992.457 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:32.736Z,1520736992.736 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-11T02:56:32.736Z,1520736992.736 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-03-11T02:56:33.087Z,1520736993.087 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-11T02:56:33.088Z,1520736993.088 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-11T02:56:33.088Z,1520736993.088 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-11T02:56:33.661Z,1520736993.661 [CTD_Seabird](ERROR): Salinity reading out of range: 15.916092 psu
2018-03-11T02:56:33.662Z,1520736993.662 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:34.255Z,1520736994.255 [CTD_Seabird](ERROR): Salinity reading out of range: 15.916143 psu
2018-03-11T02:56:34.256Z,1520736994.256 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:35.455Z,1520736995.455 [CTD_Seabird](ERROR): Salinity reading out of range: 15.916590 psu
2018-03-11T02:56:35.456Z,1520736995.456 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:36.271Z,1520736996.271 [NAL9602](INFO): SBD MO Status=2, MOMSN=5019, MT Status=2, MTMSN=0
2018-03-11T02:56:36.271Z,1520736996.271 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-11T02:56:36.656Z,1520736996.656 [CTD_Seabird](ERROR): Salinity reading out of range: 15.917123 psu
2018-03-11T02:56:36.658Z,1520736996.658 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:37.257Z,1520736997.257 [CTD_Seabird](ERROR): Salinity reading out of range: 15.916800 psu
2018-03-11T02:56:37.258Z,1520736997.258 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:38.462Z,1520736998.462 [CTD_Seabird](ERROR): Salinity reading out of range: 15.916618 psu
2018-03-11T02:56:38.463Z,1520736998.463 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:39.255Z,1520736999.255 [CTD_Seabird](ERROR): Salinity reading out of range: 15.915899 psu
2018-03-11T02:56:39.256Z,1520736999.256 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:40.454Z,1520737000.454 [CTD_Seabird](ERROR): Salinity reading out of range: 15.918283 psu
2018-03-11T02:56:40.455Z,1520737000.455 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:41.659Z,1520737001.659 [CTD_Seabird](ERROR): Salinity reading out of range: 15.917954 psu
2018-03-11T02:56:41.661Z,1520737001.661 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:42.261Z,1520737002.261 [CTD_Seabird](ERROR): Salinity reading out of range: 15.917205 psu
2018-03-11T02:56:42.262Z,1520737002.262 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:43.462Z,1520737003.462 [CTD_Seabird](ERROR): Salinity reading out of range: 15.916309 psu
2018-03-11T02:56:43.463Z,1520737003.463 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:44.256Z,1520737004.256 [CTD_Seabird](ERROR): Salinity reading out of range: 15.915493 psu
2018-03-11T02:56:44.258Z,1520737004.258 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:45.458Z,1520737005.458 [CTD_Seabird](ERROR): Salinity reading out of range: 15.914038 psu
2018-03-11T02:56:45.459Z,1520737005.459 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:46.658Z,1520737006.658 [CTD_Seabird](ERROR): Salinity reading out of range: 15.915394 psu
2018-03-11T02:56:46.659Z,1520737006.659 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:47.255Z,1520737007.255 [CTD_Seabird](ERROR): Salinity reading out of range: 15.915618 psu
2018-03-11T02:56:47.256Z,1520737007.256 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:48.455Z,1520737008.455 [CTD_Seabird](ERROR): Salinity reading out of range: 15.914737 psu
2018-03-11T02:56:48.456Z,1520737008.456 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:49.658Z,1520737009.658 [CTD_Seabird](ERROR): Salinity reading out of range: 15.913620 psu
2018-03-11T02:56:49.661Z,1520737009.661 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:50.254Z,1520737010.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.913045 psu
2018-03-11T02:56:50.255Z,1520737010.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:51.462Z,1520737011.462 [CTD_Seabird](ERROR): Salinity reading out of range: 15.915119 psu
2018-03-11T02:56:51.463Z,1520737011.463 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:52.663Z,1520737012.663 [CTD_Seabird](ERROR): Salinity reading out of range: 15.914522 psu
2018-03-11T02:56:52.665Z,1520737012.665 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:53.254Z,1520737013.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.914158 psu
2018-03-11T02:56:53.255Z,1520737013.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:54.457Z,1520737014.457 [CTD_Seabird](ERROR): Salinity reading out of range: 15.913262 psu
2018-03-11T02:56:54.461Z,1520737014.461 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:55.257Z,1520737015.257 [CTD_Seabird](ERROR): Salinity reading out of range: 15.913811 psu
2018-03-11T02:56:55.258Z,1520737015.258 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:56.459Z,1520737016.459 [CTD_Seabird](ERROR): Salinity reading out of range: 15.913898 psu
2018-03-11T02:56:56.460Z,1520737016.460 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:57.661Z,1520737017.661 [CTD_Seabird](ERROR): Salinity reading out of range: 15.912651 psu
2018-03-11T02:56:57.662Z,1520737017.662 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:58.255Z,1520737018.255 [CTD_Seabird](ERROR): Salinity reading out of range: 15.912219 psu
2018-03-11T02:56:58.258Z,1520737018.258 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:58.272Z,1520737018.272 [NAL9602](INFO): SBD MO Status=0, MOMSN=5019, MT Status=0, MTMSN=0
2018-03-11T02:56:58.272Z,1520737018.272 [NAL9602](INFO): No messages in MT queue
2018-03-11T02:56:59.434Z,1520737019.434 [NAL9602](INFO): GPS fix at 20180311T025656: (21.337801, -158.300662)
2018-03-11T02:56:59.458Z,1520737019.458 [CTD_Seabird](ERROR): Salinity reading out of range: 15.913321 psu
2018-03-11T02:56:59.459Z,1520737019.459 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:56:59.558Z,1520737019.558 [sci2:NeedComms:E] Stopped
2018-03-11T02:56:59.559Z,1520737019.559 [sci2:NeedComms](INFO): Completed sci2:NeedComms
2018-03-11T02:56:59.559Z,1520737019.559 [sci2:NeedComms] Stopped
2018-03-11T02:56:59.559Z,1520737019.559 [sci2:NeedComms](DEBUG): Aggregate::uninitialize sci2:NeedComms
2018-03-11T02:56:59.559Z,1520737019.559 [sci2:NeedComms:B.GoToSurface] Stopped
2018-03-11T02:56:59.559Z,1520737019.559 [sci2:NeedComms:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2018-03-11T02:56:59.916Z,1520737019.916 [sci2:StartingMission](INFO): Completed sci2:StartingMission
2018-03-11T02:56:59.916Z,1520737019.916 [sci2:StartingMission] Stopped
2018-03-11T02:56:59.916Z,1520737019.916 [sci2:StartingMission](DEBUG): Aggregate::uninitialize sci2:StartingMission
2018-03-11T02:56:59.916Z,1520737019.916 [sci2:Lap] Running Loop=1
2018-03-11T02:56:59.917Z,1520737019.917 [sci2:Lap](DEBUG): Aggregate::initialize sci2:Lap
2018-03-11T02:56:59.921Z,1520737019.921 [sci2:Lap:Wpt1] Running Loop=1
2018-03-11T02:56:59.921Z,1520737019.921 [sci2:Lap:Wpt1](DEBUG): Aggregate::initialize sci2:Lap:Wpt1
2018-03-11T02:56:59.921Z,1520737019.921 [sci2:Lap:Wpt1:A.Waypoint] Running Loop=1
2018-03-11T02:56:59.921Z,1520737019.921 [sci2:Lap:Wpt1:A.Waypoint](DEBUG): Initialize WaypointComponent.
2018-03-11T02:57:00.658Z,1520737020.658 [CTD_Seabird](ERROR): Salinity reading out of range: 15.912803 psu
2018-03-11T02:57:00.659Z,1520737020.659 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:57:01.286Z,1520737021.286 [CTD_Seabird](ERROR): Salinity reading out of range: 15.912220 psu
2018-03-11T02:57:01.293Z,1520737021.293 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:57:02.502Z,1520737022.502 [CTD_Seabird](ERROR): Salinity reading out of range: 15.912533 psu
2018-03-11T02:57:02.503Z,1520737022.503 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:57:03.254Z,1520737023.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.911721 psu
2018-03-11T02:57:03.256Z,1520737023.256 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:57:04.456Z,1520737024.456 [CTD_Seabird](ERROR): Salinity reading out of range: 15.912049 psu
2018-03-11T02:57:04.458Z,1520737024.458 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:57:05.662Z,1520737025.662 [CTD_Seabird](ERROR): Salinity reading out of range: 15.912545 psu
2018-03-11T02:57:05.663Z,1520737025.663 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:57:06.254Z,1520737026.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.914598 psu
2018-03-11T02:57:06.255Z,1520737026.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:57:07.458Z,1520737027.458 [CTD_Seabird](ERROR): Salinity reading out of range: 15.913650 psu
2018-03-11T02:57:07.459Z,1520737027.459 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:57:08.660Z,1520737028.660 [CTD_Seabird](ERROR): Salinity reading out of range: 15.911963 psu
2018-03-11T02:57:08.662Z,1520737028.662 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:57:09.254Z,1520737029.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.910882 psu
2018-03-11T02:57:09.256Z,1520737029.256 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:57:10.457Z,1520737030.457 [CTD_Seabird](ERROR): Salinity reading out of range: 15.909879 psu
2018-03-11T02:57:10.460Z,1520737030.460 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:57:11.658Z,1520737031.658 [CTD_Seabird](ERROR): Salinity reading out of range: 15.909760 psu
2018-03-11T02:57:11.660Z,1520737031.660 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:57:12.256Z,1520737032.256 [CTD_Seabird](ERROR): Salinity reading out of range: 15.914065 psu
2018-03-11T02:57:12.258Z,1520737032.258 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:57:13.460Z,1520737033.460 [CTD_Seabird](ERROR): Salinity reading out of range: 15.915377 psu
2018-03-11T02:57:13.461Z,1520737033.461 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:57:14.256Z,1520737034.256 [CTD_Seabird](ERROR): Salinity reading out of range: 15.914846 psu
2018-03-11T02:57:14.258Z,1520737034.258 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:57:15.463Z,1520737035.463 [CTD_Seabird](ERROR): Salinity reading out of range: 15.914487 psu
2018-03-11T02:57:15.464Z,1520737035.464 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:57:16.254Z,1520737036.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.914139 psu
2018-03-11T02:57:16.255Z,1520737036.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:57:17.455Z,1520737037.455 [CTD_Seabird](ERROR): Salinity reading out of range: 15.913582 psu
2018-03-11T02:57:17.456Z,1520737037.456 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:57:18.658Z,1520737038.658 [CTD_Seabird](ERROR): Salinity reading out of range: 15.913095 psu
2018-03-11T02:57:18.660Z,1520737038.660 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:57:19.254Z,1520737039.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.912701 psu
2018-03-11T02:57:19.255Z,1520737039.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:57:20.472Z,1520737040.472 [CTD_Seabird](ERROR): Salinity reading out of range: 15.916770 psu
2018-03-11T02:57:20.473Z,1520737040.473 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:57:21.255Z,1520737041.255 [CTD_Seabird](ERROR): Salinity reading out of range: 15.918100 psu
2018-03-11T02:57:21.257Z,1520737041.257 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:57:22.459Z,1520737042.459 [CTD_Seabird](ERROR): Salinity reading out of range: 15.916008 psu
2018-03-11T02:57:22.460Z,1520737042.460 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:57:23.663Z,1520737043.663 [CTD_Seabird](ERROR): Salinity reading out of range: 15.914919 psu
2018-03-11T02:57:23.664Z,1520737043.664 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:57:24.256Z,1520737044.256 [CTD_Seabird](ERROR): Salinity reading out of range: 15.914722 psu
2018-03-11T02:57:24.257Z,1520737044.257 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:57:25.459Z,1520737045.459 [CTD_Seabird](ERROR): Salinity reading out of range: 15.914275 psu
2018-03-11T02:57:25.461Z,1520737045.461 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:57:26.254Z,1520737046.254 [CTD_Seabird](ERROR): Salinity reading out of range: 15.915292 psu
2018-03-11T02:57:26.255Z,1520737046.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:57:27.454Z,1520737047.454 [CTD_Seabird](ERROR): Salinity reading out of range: 15.915529 psu
2018-03-11T02:57:27.455Z,1520737047.455 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:57:28.654Z,1520737048.654 [CTD_Seabird](ERROR): Salinity reading out of range: 15.914575 psu
2018-03-11T02:57:28.655Z,1520737048.655 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:57:29.255Z,1520737049.255 [CTD_Seabird](ERROR): Salinity reading out of range: 15.915416 psu
2018-03-11T02:57:29.256Z,1520737049.256 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:57:30.454Z,1520737050.454 [CTD_Seabird](ERROR): Salinity reading out of range: 15.917065 psu
2018-03-11T02:57:30.456Z,1520737050.456 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:57:31.338Z,1520737051.338 [NAL9602](INFO): Powering down
2018-03-11T02:57:31.659Z,1520737051.659 [CTD_Seabird](ERROR): Salinity reading out of range: 15.916597 psu
2018-03-11T02:57:31.662Z,1520737051.662 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:57:32.272Z,1520737052.272 [CTD_Seabird](ERROR): Salinity reading out of range: 15.916592 psu
2018-03-11T02:57:32.274Z,1520737052.274 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-11T02:57:33.