ahi Path

trajectory

20251027T181338 [CommandExec]:got command restart logs

20251027T181345 [Default:CheckIn:E]:Default mission has been running for 101.212256 min

20251027T181347 [CommandExec]:got command run ./Missions/Maintenance/ballast_and_trim.tl

20251027T181406 [CommandExec]:Running ./Missions/Maintenance/ballast_and_trim.tl

20251027T181406 [MissionManager]:Started mission ballast_and_trim

20251027T181410 [CTD_Seabird]:Failed to parse device response: #

20251027T181412 [CTD_Seabird]:Salinity reading out of range: 2.653437 psu

20251027T181413 [CTD_Seabird]:Salinity reading out of range: 0.906550 psu

20251027T181414 [CTD_Seabird]:Salinity reading out of range: 3.627646 psu

20251027T181640 [CTD_Seabird]:Failed to parse device response: .98#

20251027T183115 [CommandExec]:got command gfscan

20251027T183115 [GFScanner]:Beginning ground fault scan

20251027T184116 completed. Estimation time: 10.01 minutes.

20251027T184116 persisted config values to: 162.414241 cc buoyancy neutral and 24.263883 mm mass default

20251027T184355 [CommandExec]:got command schedule "run Maintenance/calibrate_sparton_compass.tl"

20251027T184355 [CommandExec]:Scheduled #1: "run Maintenance/calibrate_sparton_compass.tl", AFTER MISSION

20251027T184612 [BPC1]:BPC1B failed to parse battery data due to unrecognized msg size.

20251027T184629 [BPC1]:BPC1B got IPBS message with 6 sticks (min is 7).

20251027T184644 [BPC1]:BPC1B got IPBS message with 6 sticks (min is 7).

20251027T184652 [CommandExec]:got command run ./Missions/Maintenance/calibrate_sparton_compass.tl

20251027T184700 [BPC1]:BPC1B got IPBS message with 6 sticks (min is 7).

20251027T184704 [CommandExec]:Running ./Missions/Maintenance/calibrate_sparton_compass.tl

20251027T184704 [MissionManager]:Started mission calibrate_sparton_compass

20251027T184705 [calibrate_sparton_compass:N.AltitudeEnvelope]:Altitude Measurement is not Active.

20251027T184707 [CTD_Seabird]:Failed to parse device response: #

20251027T184748 [NAL9602]:Failed to initiate SBD session. Error code: 2

20251027T185654 [BPC1]:BPC1B: No match for serial number 1717 in BPC1B's battery stick inventory (sticks 32-62 in onboard configuration file).

20251027T191609 [BPC1]:Battery stick #17 (s/n: 0084) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.

20251027T191609 [BPC1]:Battery stick #24 (s/n: 01D3) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.

20251027T191609 [BPC1]:Battery stick #29 (s/n: 00A7) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.

20251027T191609 [BPC1]:Battery stick #38 (s/n: 01BC) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.

20251027T191609 [BPC1]:Battery stick #51 (s/n: 01D6) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.

20251027T191609 [BPC1]:Battery stick #55 (s/n: 0180) reported TERMINATE_CHARGE_ALARM. Status code: 0x40E0.

20251027T191609 [BPC1]:Battery stick #57 (s/n: 019F) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.

20251027T191609 [BPC1]:Battery stick #59 (s/n: 0184) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x5AD0.

20251027T191609 [BPC1]:Failed to receive data from all sticks prior to timeout. Will not retry this scan cycle.

20251027T192714 [CTD_Seabird]:Failed to parse device response: 09,3051.90#

20251027T194704 [AHRS_M2]:Acquired 9 calibration points.

20251027T194704 [MissionManager]:Started mission Default

20251027T194705 [AHRS_M2]:Magnetic calibration quality (0[best] to 10000) is 0.000153.

20251027T194847 [CommandExec]:got command schedule "load Science/sci2.tl;set sci2.MissionTimeout 10 h;set sci2.Lat1 36.75 degree;set sci2.Lon1 -122.022 degree;set sci2.YoYoMaxDepth 150 m;set sci2:BackseatDriver.EnableBackseat 1 bool;run"

20251027T194847 [CommandExec]:Scheduled #2: "load Science/sci2.tl;set sci2.MissionTimeout 10 h;set sci2.Lat1 36.75 degree;set sci2.Lon1 -122.022 degree;set sci2.YoYoMaxDepth 150 m;set sci2:BackseatDriver.EnableBackseat 1 bool;run", AFTER MISSION

20251027T194847 [CommandExec]:got command load ./Missions/Science/sci2.tl

20251027T194900 [CommandExec]:Loaded ./Missions/Science/sci2.tl id=sci2

20251027T194917 [CommandExec]:got command set sci2.MissionTimeout 10 hour

20251027T194917 [CommandExec]:got command set sci2.Lat1 36.75 degree

20251027T194917 [CommandExec]:got command set sci2.Lon1 -122.022 degree

20251027T194917 [CommandExec]:got command set sci2.YoYoMaxDepth 150 meter

20251027T194917 [CommandExec]:got command set sci2:BackseatDriver.EnableBackseat 1 bool

20251027T194917 [CommandExec]:got command run

20251027T194917 [CommandExec]:Running

20251027T194918 [MissionManager]:Started mission sci2

20251027T194919 [sci2:StandardEnvelopes:A.AltitudeEnvelope]:Altitude Measurement is not Active.

20251027T194922 [CTD_Seabird]:Failed to parse device response: #

20251027T194927 [NAL9602]:Failed to initiate SBD session. Error code: 2

20251027T195024 [NAL9602]:Failed to initiate SBD session. Error code: 2

20251027T195051 [BackseatComponent]:ptvr: Running Planktivore backseat app. Logging to: 20251027T195048, NVMEDATA = 12977736 B

20251027T195055 [Depth_Keller]:Failed to copy Depth_Keller.enableBroadcast's data value to LCM message.

20251027T195209 [sci2:DiveCmd:YoYoDive:dive:E.AltitudeEnvelope]:Altitude Measurement is not Active.

20251027T202036 [BPC1]:BPC1B failed to parse battery data due to unrecognized msg size.

20251027T202152 [BPC1]:BPC1A failed to parse battery data due to unrecognized msg size.

20251027T202612 [CTD_Seabird]:Failed to parse device response: 0,3.69757,2062.85#

20251027T202912 [BPC1]:Battery stick #17 (s/n: 0084) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.

20251027T202912 [BPC1]:Battery stick #24 (s/n: 01D3) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.

20251027T202912 [BPC1]:Battery stick #29 (s/n: 00A7) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.

20251027T202912 [BPC1]:Battery stick #38 (s/n: 01BC) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.

20251027T202912 [BPC1]:Battery stick #55 (s/n: 0180) reported TERMINATE_CHARGE_ALARM. Status code: 0x40E0.

20251027T202912 [BPC1]:Battery stick #57 (s/n: 019F) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.

20251027T202912 [BPC1]:Battery stick #59 (s/n: 0184) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x5AD0.

20251027T213732 [BPC1]:Battery stick #16 (s/n: 00F8) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.

20251027T213732 [BPC1]:Battery stick #17 (s/n: 0084) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.

20251027T213732 [BPC1]:Battery stick #29 (s/n: 00A7) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.

20251027T213732 [BPC1]:Battery stick #38 (s/n: 01BC) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.

20251027T213732 [BPC1]:Battery stick #55 (s/n: 0180) reported TERMINATE_CHARGE_ALARM. Status code: 0x40E0.

20251027T213732 [BPC1]:Battery stick #57 (s/n: 019F) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.

20251027T213732 [BPC1]:Battery stick #59 (s/n: 0184) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x5AD0.

20251027T222839 [GFScanner]:Beginning ground fault scan

20251027T224611 [CTD_Seabird]:Failed to parse device response: 77.73,10.5176,9#

20251027T224649 [BPC1]:BPC1B: No match for serial number 1717 in BPC1B's battery stick inventory (sticks 32-62 in onboard configuration file).

20251027T224756 [ElevatorServo]:Reading outside of valid range:0.000000#

20251027T224756 [ElevatorServo]:Elevator reporting null position

20251027T224756 [ElevatorServo]:getPosition uart error serial timeout

20251027T224756 [ElevatorServo]:Elevator uart error - getPosition.serial timeout

20251027T224756 [ElevatorServo]:Communications Fault

20251027T224756 [CBIT]:Communications Fault in component: ElevatorServo

20251027T230614 [CTD_Seabird]:Failed to parse device response: 0.22,14.437.03#

20251027T230834 [BPC1]:Battery stick #16 (s/n: 00F8) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.

20251027T230834 [BPC1]:Battery stick #17 (s/n: 0084) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.

20251027T230834 [BPC1]:Failed to receive data from 17 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 9, 10, 11, 12, 14, 17, 24, 29, 34, 35, 38, 51, 52, 53, 55, 57, 59.

20251027T232649 [BPC1]:Battery stick #16 (s/n: 00F8) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.

20251027T232649 [BPC1]:Battery stick #17 (s/n: 0084) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.

20251027T233910 [ThrusterHE]:Could not get status:serial timeout

20251028T004754 [BPC1]:BPC1A: No match for serial number 1717 in BPC1A's battery stick inventory (sticks 1-31 in onboard configuration file).

20251028T005432 [BPC1]:BPC1B failed to parse battery data due to unrecognized msg size.

20251028T005548 [CTD_Seabird]:Failed to parse device response: 4,3.79612,2681.12#

20251028T005750 [BPC1]:Failed to receive data from 18 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 9, 10, 11, 12, 13, 14, 16, 17, 24, 29, 35, 38, 51, 52, 53, 55, 57, 59.

20251028T011947 [CTD_Seabird]:Failed to parse device response: .30#

20251028T013255 [BPC1]:BPC1A failed to parse battery data due to unrecognized msg size.

20251028T013331 [CTD_Seabird]:Failed to parse device response: 6,3.70058,2040.02#

20251028T013852 [BPC1]:Failed to receive data from 18 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 9, 10, 11, 12, 13, 14, 16, 17, 24, 29, 35, 38, 51, 52, 53, 55, 57, 59.

20251028T021954 [BPC1]:Failed to receive data from 18 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 9, 10, 11, 12, 13, 14, 16, 17, 24, 29, 35, 38, 51, 52, 53, 55, 57, 59.

20251028T022722 [CommandExec]:got command schedule "load Science/sci2.tl;set sci2.MissionTimeout 18 h;set sci2.Lat1 36.712468 degree;set sci2.Lon1 -122.186898 degree;set sci2.Lat2 36.75 degree;set sci2.Lon2 -122.022 degree;set sci2.YoYoMaxDepth 200 m" 4kzqw 1 2.000000

20251028T022722 [CommandExec]:Scheduling command #1 of 2 with id=4kzqw

20251028T022722 [CommandExec]:Scheduled #3 (#1 of 2 with id='4kzqw'): "load Science/sci2.tl;set sci2.MissionTimeout 18 h;set sci2.Lat1 36.712468 degree;set sci2.Lon1 -122.186898 degree;set sci2.Lat2 36.75 degree;set sci2.Lon2 -122.022 degree;set sci2.YoYoMaxDepth 200 m", AFTER MISSION

20251028T022808 [CommandExec]:got command schedule "set sci2:BackseatDriver.EnableBackseat 1 bool;run" 4kzqw 2 2.000000

20251028T022808 [CommandExec]:Scheduling command #2 of 2 with id=4kzqw

20251028T022808 [CommandExec]:Scheduled #4 (#2 of 2 with id='4kzqw'): "set sci2:BackseatDriver.EnableBackseat 1 bool;run", AFTER MISSION

20251028T025423 [CommandExec]:got command load ./Missions/Science/sci2.tl

20251028T025436 [CommandExec]:Loaded ./Missions/Science/sci2.tl id=sci2

20251028T025436 [MissionManager]:Started mission Default

20251028T025452 [CommandExec]:got command set sci2.MissionTimeout 18 hour

20251028T025452 [CommandExec]:got command set sci2.Lat1 36.712468 degree

20251028T025452 [CommandExec]:got command set sci2.Lon1 -122.186898 degree

20251028T025452 [CommandExec]:got command set sci2.Lat2 36.75 degree

20251028T025452 [CommandExec]:got command set sci2.Lon2 -122.022 degree

20251028T025452 [CommandExec]:got command set sci2.YoYoMaxDepth 200 meter

20251028T025459 [CommandExec]:got command set sci2:BackseatDriver.EnableBackseat 1 bool

20251028T025459 [CommandExec]:got command run

20251028T025459 [CommandExec]:Running

20251028T025459 [MissionManager]:Started mission sci2

20251028T025501 [sci2:StandardEnvelopes:A.AltitudeEnvelope]:Altitude Measurement is not Active.

20251028T025702 [BackseatComponent]:ptvr: Running Planktivore backseat app. Logging to: 20230327T175449, NVMEDATA = 61767596 B

20251028T025705 [Depth_Keller]:Failed to copy Depth_Keller.enableBroadcast's data value to LCM message.

20251028T030055 [sci2:DiveCmd:YoYoDive:dive:E.AltitudeEnvelope]:Altitude Measurement is not Active.

20251028T030212 [BackseatComponent]:Failed to receive device response within the specified timeout.

20251028T030212 [BackseatComponent]:Communications Fault

20251028T030212 [Power24vConverter]:Hardware Fault

20251028T030212 [CBIT]:Communications Fault in component: BackseatComponent

20251028T030212 [CBIT]:Hardware Fault in component: Power24vConverter

20251028T030220 [DAT]:LCB fault: Current Limiter Activated.

20251028T030220 [DAT]:Hardware Fault

20251028T030220 [CBIT]:Hardware Fault in component: DAT

20251028T030221 [DAT]:LCB fault: Current Limiter Activated.

20251028T030313 [BackseatComponent]:LCB fault: Current Limiter Activated.

20251028T030313 [BackseatComponent]:Hardware Fault

20251028T030447 [BackseatComponent]:ptvr: Running Planktivore backseat app. Logging to: 20230327T175449, NVMEDATA = 61767632 B

20251028T030450 [Depth_Keller]:Failed to copy Depth_Keller.enableBroadcast's data value to LCM message.

20251028T030955 [BackseatComponent]:Failed to receive device response within the specified timeout.

20251028T030955 [BackseatComponent]:Communications Fault

20251028T030955 [Power24vConverter]:Hardware Fault

20251028T030955 [CBIT]:Communications Fault in component: BackseatComponent

20251028T030955 [CBIT]:Hardware Fault in component: Power24vConverter

20251028T030956 [DAT]:LCB fault: Current Limiter Activated.

20251028T030956 [DAT]:Hardware Fault

20251028T030956 [CBIT]:Hardware Fault in component: DAT

20251028T031056 [BackseatComponent]:LCB fault: Current Limiter Activated.

20251028T031056 [BackseatComponent]:Hardware Fault

20251028T031739 [BackseatComponent]:Failed to receive device response within the specified timeout.

20251028T031739 [BackseatComponent]:Communications Fault

20251028T031739 [Power24vConverter]:Hardware Fault

20251028T031739 [CBIT]:Communications Fault in component: BackseatComponent

20251028T031739 [CBIT]:Hardware Fault in component: Power24vConverter

20251028T031743 [DAT]:Hardware Fault

20251028T031743 [CBIT]:Hardware Fault in component: DAT

20251028T031840 [BackseatComponent]:LCB fault: Current Limiter Activated.

20251028T031840 [BackseatComponent]:Hardware Fault

20251028T034130 [Power24vConverter]: LCB fault: LCB Watchdog Reset.

20251028T034852 [CTD_Seabird]:Failed to parse device response: .29#

20251028T041043 [CTD_Seabird]:Failed to parse device response: 0.07,1#

20251028T041125 [NAL9602]:Inadequate Iridium signal strength reported: 0

20251028T041153 [NAL9602]:Inadequate Iridium signal strength reported: 0

20251028T041157 [NAL9602]:Inadequate Iridium signal strength reported: 0

20251028T041254 [Power24vConverter]: LCB fault: Invalid Command.

20251028T041331 [DAT]:failed to enter command mode

20251028T042839 [GFScanner]:Beginning ground fault scan

20251028T045634 [BPC1]:BPC1A failed to parse battery data due to unrecognized msg size.

20251028T045716 [BPC1]:BPC1A: No match for serial number 1717 in BPC1A's battery stick inventory (sticks 1-31 in onboard configuration file).

20251028T051441 [DAT]:failed to enter command mode

20251028T052122 [CommandExec]:got command schedule asap "load Science/sci2.tl;set sci2.MissionTimeout 18 h;set sci2.Lat1 36.712468 degree;set sci2.Lon1 -122.186898 degree;set sci2.Lat2 36.691 degree;set sci2.Lon2 -122.376 degree;set sci2.YoYoMaxDepth 200 m" 4l53h 1 2.000000

20251028T052122 [CommandExec]:Scheduling command #1 of 2 with id=4l53h

20251028T052122 [CommandExec]:Scheduled #5 (#1 of 2 with id='4l53h'): "load Science/sci2.tl;set sci2.MissionTimeout 18 h;set sci2.Lat1 36.712468 degree;set sci2.Lon1 -122.186898 degree;set sci2.Lat2 36.691 degree;set sci2.Lon2 -122.376 degree;set sci2.YoYoMaxDepth 200 m", ASAP

20251028T052135 [CommandExec]:got command schedule asap "set sci2:BackseatDriver.EnableBackseat 1 bool;run" 4l53h 2 2.000000

20251028T052135 [CommandExec]:Scheduling command #2 of 2 with id=4l53h

20251028T052135 [CommandExec]:Scheduled #6 (#2 of 2 with id='4l53h'): "set sci2:BackseatDriver.EnableBackseat 1 bool;run", ASAP

20251028T052135 [CommandExec]:got command load ./Missions/Science/sci2.tl

20251028T052147 [CommandExec]:Loaded ./Missions/Science/sci2.tl id=sci2

20251028T052147 [MissionManager]:Started mission Default

20251028T052200 [CommandExec]:got command set sci2.MissionTimeout 18 hour

20251028T052200 [CommandExec]:got command set sci2.YoYoMaxDepth 200 meter

20251028T052207 [CommandExec]:got command set sci2:BackseatDriver.EnableBackseat 1 bool

20251028T052207 [CommandExec]:got command run

20251028T052207 [CommandExec]:Running

20251028T052207 [MissionManager]:Started mission sci2

20251028T052209 [sci2:StandardEnvelopes:A.AltitudeEnvelope]:Altitude Measurement is not Active.

20251028T052437 [sci2:DiveCmd:YoYoDive:dive:E.AltitudeEnvelope]:Altitude Measurement is not Active.

20251028T052541 [BPC1]:BPC1A got IPBS message with 6 sticks (min is 7).

20251028T053521 [BPC1]:BPC1A: No match for serial number FF9F in BPC1A's battery stick inventory (sticks 1-31 in onboard configuration file).

20251028T055054 [BPC1]:Failed to receive data from 19 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 9, 10, 11, 12, 13, 14, 16, 17, 24, 29, 34, 35, 38, 51, 52, 53, 55, 57, 59.

20251028T061732 [BPC1]:BPC1B: No match for serial number 1717 in BPC1B's battery stick inventory (sticks 32-62 in onboard configuration file).

20251028T063157 [BPC1]:Failed to receive data from 19 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 9, 10, 11, 12, 13, 14, 16, 17, 24, 29, 34, 35, 38, 51, 52, 53, 55, 57, 59.

20251028T065922 [CTD_Seabird]:Failed to parse device response: 2091.44#

20251028T071259 [BPC1]:Failed to receive data from 19 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 9, 10, 11, 12, 13, 14, 16, 17, 24, 29, 34, 35, 38, 51, 52, 53, 55, 57, 59.

20251028T085026 [BuoyancyServo]:getPosition uart error serial timeout

20251028T085026 [BuoyancyServo]:Buoyancy getPosition uart error.serial timeout

20251028T085026 [BuoyancyServo]:Communications Fault

20251028T085026 [CBIT]:Communications Fault in component: BuoyancyServo

20251028T085028 [BuoyancyServo]:LCB fault: Current Limiter Activated.

20251028T085028 [BuoyancyServo]:Hardware Fault

20251028T112538 [BPC1]:Failed to receive data from 17 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 9, 10, 11, 12, 14, 16, 17, 24, 29, 35, 38, 51, 52, 53, 55, 57, 59.

20251028T120640 [BPC1]:Failed to receive data from 17 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 9, 10, 11, 12, 14, 16, 17, 24, 29, 35, 38, 51, 52, 53, 55, 57, 59.

20251028T122440 [BPC1]:Battery stick #52 (s/n: 0160) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.

20251028T122943 [CTD_Seabird]:Failed to parse device response: 0.27,16.0517,#

20251028T130749 [CTD_Seabird]:Failed to parse device response: 25,2018.85#

20251028T132933 [BPC1]:BPC1A got IPBS message with 6 sticks (min is 7).

20251028T133553 [CTD_Seabird]:Failed to parse device response: 48.24,6,2843.60#

20251028T134437 [CTD_Seabird]:Failed to parse device response: 23.79,16.0310,4#

20251028T135541 [BPC1]:Failed to receive data from 16 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 9, 10, 11, 12, 14, 17, 24, 29, 34, 35, 38, 51, 53, 55, 57, 59.

20251028T143643 [BPC1]:Failed to receive data from 16 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 9, 10, 11, 12, 14, 17, 24, 29, 34, 35, 38, 51, 53, 55, 57, 59.

20251028T145543 [CTD_Seabird]:Failed to parse device response: 1221064,3895.92#

20251028T153911 [ThrusterHE]:getSpeed error serial timeout

20251028T153911 [ThrusterHE]:Thruster uart error: serial timeout

20251028T153911 [ThrusterHE]:Communications Fault

20251028T153911 [CBIT]:Communications Fault in component: ThrusterHE

20251028T155406 [CTD_Seabird]:Failed to parse device response: 105181.25#

20251028T160200 [CommandExec]:got command set sci2:NeedComms.WaitForPitchUp 30 minute

20251028T165952 [BPC1]:BPC1A: No match for serial number 1717 in BPC1A's battery stick inventory (sticks 1-31 in onboard configuration file).

20251028T172801 [RudderServo]:Reading outside of valid range:0.000000#

20251028T172801 [RudderServo]:Rudder reporting null position

20251028T172802 [RudderServo]:getPosition uart error serial timeout

20251028T172802 [RudderServo]:Rudder uart error - getPosition..serial timeout

20251028T172802 [RudderServo]:Communications Fault

20251028T172802 [CBIT]:Communications Fault in component: RudderServo

20251028T173941 [CommandExec]:got command schedule "load Science/sci2.tl;set sci2.MissionTimeout 18 h;set sci2.Lat1 36.712468 degree;set sci2.Lon1 -122.186898 degree;set sci2.Lat2 36.691 degree;set sci2.Lon2 -122.376 degree;set sci2.Lat3 36.712468 degree;set sci2.Lon3 -122.186898 degree" 4m58g 1 2.000000

20251028T173941 [CommandExec]:Scheduling command #1 of 2 with id=4m58g

20251028T173941 [CommandExec]:Scheduled #7 (#1 of 2 with id='4m58g'): "load Science/sci2.tl;set sci2.MissionTimeout 18 h;set sci2.Lat1 36.712468 degree;set sci2.Lon1 -122.186898 degree;set sci2.Lat2 36.691 degree;set sci2.Lon2 -122.376 degree;set sci2.Lat3 36.712468 degree;set sci2.Lon3 -122.186898 degree", AFTER MISSION

20251028T174001 [CommandExec]:got command schedule "set sci2.YoYoMaxDepth 200 m;set sci2:NeedComms.WaitForPitchUp 30 min;set sci2:BackseatDriver.EnableBackseat 1 bool;run" 4m58g 2 2.000000

20251028T174001 [CommandExec]:Scheduling command #2 of 2 with id=4m58g

20251028T174001 [CommandExec]:Scheduled #8 (#2 of 2 with id='4m58g'): "set sci2.YoYoMaxDepth 200 m;set sci2:NeedComms.WaitForPitchUp 30 min;set sci2:BackseatDriver.EnableBackseat 1 bool;run", AFTER MISSION

20251028T174039 [CommandExec]:got command set sci2:NeedComms.WaitForPitchUp 30 minute

20251028T184507 [BPC1]:Failed to receive data from 20 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 9, 10, 11, 12, 13, 14, 15, 16, 17, 24, 29, 34, 35, 38, 51, 52, 53, 55, 57, 59.

20251028T192609 [BPC1]:Battery stick #48 (s/n: 0272) reported OVER_TEMP_ALARM. Status code: 0x1717.

20251028T192609 [BPC1]:Failed to receive data from 20 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 9, 10, 11, 12, 13, 14, 15, 16, 17, 24, 29, 34, 35, 38, 51, 52, 53, 55, 57, 59.

20251028T194229 [CTD_Seabird]:Failed to parse device response: 59.71,1#

20251028T200146 [CommandExec]:got command schedule asap "load Science/sci2.tl;set sci2.MissionTimeout 18 h;set sci2.Lat1 36.691 degree;set sci2.Lon1 -122.376 degree;set sci2.Lat2 36.672 degree;set sci2.Lon2 -122.53 degree;set sci2.Lat3 36.691 degree;set sci2.Lon3 -122.376 degree" 4mc8t 1 2.000000

20251028T200146 [CommandExec]:Scheduling command #1 of 2 with id=4mc8t

20251028T200146 [CommandExec]:Scheduled #9 (#1 of 2 with id='4mc8t'): "load Science/sci2.tl;set sci2.MissionTimeout 18 h;set sci2.Lat1 36.691 degree;set sci2.Lon1 -122.376 degree;set sci2.Lat2 36.672 degree;set sci2.Lon2 -122.53 degree;set sci2.Lat3 36.691 degree;set sci2.Lon3 -122.376 degree", ASAP

20251028T200215 [CommandExec]:got command schedule asap "set sci2.YoYoMaxDepth 200 m;set sci2:NeedComms.WaitForPitchUp 30 min;set sci2:BackseatDriver.EnableBackseat 1 bool;run" 4mc8t 2 2.000000

20251028T200215 [CommandExec]:Scheduling command #2 of 2 with id=4mc8t

20251028T200215 [CommandExec]:Scheduled #10 (#2 of 2 with id='4mc8t'): "set sci2.YoYoMaxDepth 200 m;set sci2:NeedComms.WaitForPitchUp 30 min;set sci2:BackseatDriver.EnableBackseat 1 bool;run", ASAP

20251028T200255 [CommandExec]:got command set sci2:NeedComms.WaitForPitchUp 30 minute

20251028T200712 [BPC1]:Failed to receive data from 20 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 9, 10, 11, 12, 13, 14, 15, 16, 17, 24, 29, 34, 35, 38, 51, 52, 53, 55, 57, 59.

20251028T205612 [CTD_Seabird]:Failed to parse device response: 95.92,10.237.57#

20251028T211616 [CommandExec]:got command schedule asap "load Science/sci2.tl;set sci2.MissionTimeout 18 h;set sci2.NeedCommsTime 120 min;set sci2.Lat1 36.691 degree;set sci2.Lon1 -122.376 degree;set sci2.Lat2 36.672 degree;set sci2.Lon2 -122.53 degree;set sci2.Lat3 36.691 degree" 4mdcg 1 2.000000

20251028T211616 [CommandExec]:Scheduling command #1 of 2 with id=4mdcg

20251028T211616 [CommandExec]:Scheduled #11 (#1 of 2 with id='4mdcg'): "load Science/sci2.tl;set sci2.MissionTimeout 18 h;set sci2.NeedCommsTime 120 min;set sci2.Lat1 36.691 degree;set sci2.Lon1 -122.376 degree;set sci2.Lat2 36.672 degree;set sci2.Lon2 -122.53 degree;set sci2.Lat3 36.691 degree", ASAP

20251028T211631 [CommandExec]:got command schedule asap "set sci2.Lon3 -122.376 degree;set sci2.YoYoMinDepth 20 m;set sci2.YoYoMaxDepth 200 m;set sci2:NeedComms.WaitForPitchUp 30 min;set sci2:BackseatDriver.EnableBackseat 1 bool;run" 4mdcg 2 2.000000

20251028T211631 [CommandExec]:Scheduling command #2 of 2 with id=4mdcg

20251028T211631 [CommandExec]:Scheduled #12 (#2 of 2 with id='4mdcg'): "set sci2.Lon3 -122.376 degree;set sci2.YoYoMinDepth 20 m;set sci2.YoYoMaxDepth 200 m;set sci2:NeedComms.WaitForPitchUp 30 min;set sci2:BackseatDriver.EnableBackseat 1 bool;run", ASAP

20251028T211658 [CommandExec]:got command set sci2.NeedCommsTime 120 minute

20251028T211717 [CommandExec]:got command set sci2.YoYoMinDepth 20 meter

20251028T215216 [BPC1]:BPC1B: No match for serial number FFFF in BPC1B's battery stick inventory (sticks 32-62 in onboard configuration file).

20251028T220116 [BPC1]:BPC1A got IPBS message with 6 sticks (min is 7).

20251028T225354 [CTD_Seabird]:Failed to parse device response: 99.92.40#

20251028T232326 [CTD_Seabird]:Failed to parse device response: 8.03,4#

20251029T020343 [CTD_Seabird]:Failed to parse device response: 61747.34#

20251029T025138 [BPC1]:Battery stick #4 (s/n: 00B7) reported OVER_TEMP_ALARM. Status code: 0x1717.

20251029T033913 [CommandExec]:got command schedule "load Science/sci2.tl;set sci2.MissionTimeout 18 h;set sci2.NeedCommsTime 90 min;set sci2.Lat1 36.691 degree;set sci2.Lon1 -122.376 degree;set sci2.Lat2 36.712468 degree;set sci2.Lon2 -122.186898 degree;set sci2.YoYoMinDepth 2 m" 4mt1m 1 2.000000

20251029T033913 [CommandExec]:Scheduling command #1 of 2 with id=4mt1m

20251029T033913 [CommandExec]:Scheduled #13 (#1 of 2 with id='4mt1m'): "load Science/sci2.tl;set sci2.MissionTimeout 18 h;set sci2.NeedCommsTime 90 min;set sci2.Lat1 36.691 degree;set sci2.Lon1 -122.376 degree;set sci2.Lat2 36.712468 degree;set sci2.Lon2 -122.186898 degree;set sci2.YoYoMinDepth 2 m", AFTER MISSION

20251029T033932 [CommandExec]:got command schedule "set sci2.YoYoMaxDepth 200 m;set sci2:NeedComms.WaitForPitchUp 30 min;set sci2:BackseatDriver.EnableBackseat 1 bool;run" 4mt1m 2 2.000000

20251029T033932 [CommandExec]:Scheduling command #2 of 2 with id=4mt1m

20251029T033932 [CommandExec]:Scheduled #14 (#2 of 2 with id='4mt1m'): "set sci2.YoYoMaxDepth 200 m;set sci2:NeedComms.WaitForPitchUp 30 min;set sci2:BackseatDriver.EnableBackseat 1 bool;run", AFTER MISSION

20251029T042115 [CTD_Seabird]:Failed to parse device response: 4#

20251029T042240 [BPC1]:Failed to receive data from 16 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 9, 10, 12, 13, 14, 17, 24, 29, 34, 35, 38, 51, 53, 55, 57, 59.

20251029T044902 [CTD_Seabird]:Failed to parse device response: 118.81,9.1204,#

20251029T051627 [RudderServo]:getPosition uart error serial timeout

20251029T051627 [RudderServo]:Rudder uart error - getPosition..serial timeout

20251029T051627 [RudderServo]:Communications Fault

20251029T051627 [CBIT]:Communications Fault in component: RudderServo

20251029T085827 [BPC1]:Battery stick #10 (s/n: 00C4) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.

20251029T090840 [ThrusterHE]:Could not get status:serial timeout

20251029T090926 [Sonardyne_Nano]:Failed to parse response: >VS:2311,HPR45,EXT,TILT##

20251029T094015 [CommandExec]:got command set sci2.NeedCommsTime 90 minute

20251029T094015 [CommandExec]:got command set sci2.YoYoMinDepth 2 meter

20251029T094347 [BuoyancyServo]:getPosition uart error serial timeout

20251029T094347 [BuoyancyServo]:Buoyancy getPosition uart error.serial timeout

20251029T094347 [BuoyancyServo]:Communications Fault

20251029T094347 [CBIT]:Communications Fault in component: BuoyancyServo

20251029T094349 [BuoyancyServo]:LCB fault: Current Limiter Activated.

20251029T094349 [BuoyancyServo]:Hardware Fault

20251029T102928 [BPC1]:Battery stick #10 (s/n: 00C4) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.

20251029T104705 [BPC1]:Battery stick #10 (s/n: 00C4) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.

20251029T105836 [CTD_Seabird]:Failed to parse device response: 05#

20251029T112712 [BuoyancyServo]:getPosition uart error serial timeout

20251029T112712 [BuoyancyServo]:Buoyancy getPosition uart error.serial timeout

20251029T112712 [BuoyancyServo]:Communications Fault

20251029T112712 [CBIT]:Communications Fault in component: BuoyancyServo

20251029T123017 [ThrusterHE]:Status lock Detected.

20251029T123018 [ThrusterHE]:Status lock Detected.

20251029T123019 [ThrusterHE]:Status lock Detected.

20251029T123023 [CTD_Seabird]:Failed to parse device response: 36.76,15.5435,#

20251029T133615 [ElevatorServo]:getPosition uart error serial timeout

20251029T133615 [ElevatorServo]:Elevator uart error - getPosition.serial timeout

20251029T133615 [ElevatorServo]:Communications Fault

20251029T133615 [CBIT]:Communications Fault in component: ElevatorServo

20251029T134723 [CTD_Seabird]:Failed to parse device response: ,3875.28#

20251029T153905 [ThrusterHE]:Could not get status:serial timeout

20251029T154203 [CTD_Seabird]:Failed to parse device response: 144.00,9.369.30#

20251029T163450 [CommandExec]:got command schedule "load Science/sci2.tl;set sci2.MissionTimeout 10 h;set sci2.NeedCommsTime 90 min;set sci2.Lat1 36.75 degree;set sci2.Lon1 -122.022 degree;set sci2:NeedComms.WaitForPitchUp 30 min;set sci2:BackseatDriver.EnableBackseat 1 bool;run"

20251029T163450 [CommandExec]:Scheduled #15: "load Science/sci2.tl;set sci2.MissionTimeout 10 h;set sci2.NeedCommsTime 90 min;set sci2.Lat1 36.75 degree;set sci2.Lon1 -122.022 degree;set sci2:NeedComms.WaitForPitchUp 30 min;set sci2:BackseatDriver.EnableBackseat 1 bool;run", AFTER MISSION

20251029T163524 [CommandExec]:got command set sci2.NeedCommsTime 90 minute

20251029T163936 [Sonardyne_Nano]:Failed to parse response: >VS:2311,HPR45,EXT,TILT##

20251029T165040 [CTD_Seabird]:Failed to parse device response: 171.24,9.2165,7#

20251029T195604 [BuoyancyServo]:LCB fault: Current Limiter Activated.

20251029T195604 [BuoyancyServo]:Hardware Fault

20251029T213627 [CommandExec]:got command schedule "load Science/sci2.tl;set sci2.MissionTimeout 10 h;set sci2.NeedCommsTime 45 min;set sci2.Lat1 36.797 degree;set sci2.Lon1 -121.847 degree;set sci2.YoYoMaxDepth 100 m;set sci2.MaxDepth 110 m;set sci2:NeedComms.WaitForPitchUp 30 min" 4obw4 1 2.000000

20251029T213627 [CommandExec]:Scheduling command #1 of 2 with id=4obw4

20251029T213627 [CommandExec]:Scheduled #16 (#1 of 2 with id='4obw4'): "load Science/sci2.tl;set sci2.MissionTimeout 10 h;set sci2.NeedCommsTime 45 min;set sci2.Lat1 36.797 degree;set sci2.Lon1 -121.847 degree;set sci2.YoYoMaxDepth 100 m;set sci2.MaxDepth 110 m;set sci2:NeedComms.WaitForPitchUp 30 min", AFTER MISSION

20251029T213719 [CommandExec]:got command schedule "set sci2:NeedComms.CommsTimeout 10 min;set sci2:BackseatDriver.EnableBackseat 1 bool;run" 4obw4 2 2.000000

20251029T213719 [CommandExec]:Scheduling command #2 of 2 with id=4obw4

20251029T213719 [CommandExec]:Scheduled #17 (#2 of 2 with id='4obw4'): "set sci2:NeedComms.CommsTimeout 10 min;set sci2:BackseatDriver.EnableBackseat 1 bool;run", AFTER MISSION

20251029T213751 [CommandExec]:got command set sci2.MaxDepth 110 meter

20251029T213802 [CommandExec]:got command set sci2:NeedComms.CommsTimeout 10 minute

20251029T231527 [ThrusterHE]:getSpeed error serial timeout

20251029T231527 [ThrusterHE]:Thruster uart error: serial timeout

20251029T231527 [ThrusterHE]:Communications Fault

20251029T231527 [CBIT]:Communications Fault in component: ThrusterHE

20251029T232507 [CommandExec]:got command schedule "load Science/profile_station.tl;set profile_station.MissionTimeout 12 h;set profile_station.NeedCommsTime 45 min;set profile_station.Lat 36.797 degree;set profile_station.Lon -121.847 degree;set profile_station.YoYoMaxDepth 100 m" 4ofjl 1 2.000000

20251029T232507 [CommandExec]:Scheduling command #1 of 2 with id=4ofjl

20251029T232507 [CommandExec]:Scheduled #18 (#1 of 2 with id='4ofjl'): "load Science/profile_station.tl;set profile_station.MissionTimeout 12 h;set profile_station.NeedCommsTime 45 min;set profile_station.Lat 36.797 degree;set profile_station.Lon -121.847 degree;set profile_station.YoYoMaxDepth 100 m", AFTER MISSION

20251029T232550 [CommandExec]:got command schedule "set profile_station.MaxDepth 105 m;set profile_station:NeedComms.WaitForPitchUp 20 min;set profile_station:StandardEnvelopes.MaxDepth 100 m;set profile_station:BackseatDriver.EnableBackseat 1 bool;run" 4ofjl 2 2.000000

20251029T232550 [CommandExec]:Scheduling command #2 of 2 with id=4ofjl

20251029T232550 [CommandExec]:Scheduled #19 (#2 of 2 with id='4ofjl'): "set profile_station.MaxDepth 105 m;set profile_station:NeedComms.WaitForPitchUp 20 min;set profile_station:StandardEnvelopes.MaxDepth 100 m;set profile_station:BackseatDriver.EnableBackseat 1 bool;run", AFTER MISSION

20251030T010215 [BPC1]:Battery stick #29 (s/n: 00A7) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4A50.

20251030T020945 [Sonardyne_Nano]:Failed to parse response: >VS:2311,HPR45,EXT,TILT##

20251030T033406 [RudderServo]:getPosition uart error serial timeout

20251030T033406 [RudderServo]:Rudder uart error - getPosition..serial timeout

20251030T033406 [RudderServo]:Communications Fault

20251030T033406 [CBIT]:Communications Fault in component: RudderServo

20251030T041548 [CommandExec]:got command load ./Missions/Science/profile_station.tl

20251030T041601 [CommandExec]:Loaded ./Missions/Science/profile_station.tl id=profile_station

20251030T041631 [CommandExec]:got command set profile_station.MissionTimeout 12 hour

20251030T041631 [CommandExec]:got command set profile_station.NeedCommsTime 45 minute

20251030T041631 [CommandExec]:got command set profile_station.Lat 36.797 degree

20251030T041631 [CommandExec]:got command set profile_station.Lon -121.847 degree

20251030T041631 [CommandExec]:got command set profile_station.YoYoMaxDepth 100 meter

20251030T041707 [CommandExec]:got command set profile_station.MaxDepth 105 meter

20251030T041707 [CommandExec]:got command set profile_station:NeedComms.WaitForPitchUp 20 minute

20251030T041707 [CommandExec]:got command set profile_station:StandardEnvelopes.MaxDepth 100 meter

20251030T041707 [CommandExec]:got command set profile_station:BackseatDriver.EnableBackseat 1 bool

20251030T041707 [MissionManager]:Started mission profile_station

20251030T091431 [CTD_Seabird]:Failed to parse device response: 21.4386,2827.12#

20251030T140914 [BPC1]:Battery stick #50 (s/n: 019C) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.

20251030T150328 [CommandExec]:got command schedule asap "load Science/profile_station.tl;set profile_station.MissionTimeout 6 h;set profile_station.NeedCommsTime 20 min;set profile_station.Lat 36.797 degree;set profile_station.Lon -121.847 degree;set profile_station.YoYoMaxDepth 100 m" 4pogr 1 2.000000

20251030T150328 [CommandExec]:Scheduling command #1 of 2 with id=4pogr

20251030T150328 [CommandExec]:Scheduled #20 (#1 of 2 with id='4pogr'): "load Science/profile_station.tl;set profile_station.MissionTimeout 6 h;set profile_station.NeedCommsTime 20 min;set profile_station.Lat 36.797 degree;set profile_station.Lon -121.847 degree;set profile_station.YoYoMaxDepth 100 m", ASAP

20251030T150338 [CommandExec]:got command schedule asap "set profile_station.MaxDepth 105 m;set profile_station:NeedComms.WaitForPitchUp 20 min;set profile_station:StandardEnvelopes.MaxDepth 100 m;set profile_station:BackseatDriver.EnableBackseat 1 bool;run" 4pogr 2 2.000000

20251030T150338 [CommandExec]:Scheduling command #2 of 2 with id=4pogr

20251030T150338 [CommandExec]:Scheduled #21 (#2 of 2 with id='4pogr'): "set profile_station.MaxDepth 105 m;set profile_station:NeedComms.WaitForPitchUp 20 min;set profile_station:StandardEnvelopes.MaxDepth 100 m;set profile_station:BackseatDriver.EnableBackseat 1 bool;run", ASAP

20251030T150338 [CommandExec]:got command load ./Missions/Science/profile_station.tl

20251030T150349 [CommandExec]:Loaded ./Missions/Science/profile_station.tl id=profile_station

20251030T150419 [CommandExec]:got command set profile_station.MissionTimeout 6 hour

20251030T150419 [CommandExec]:got command set profile_station.NeedCommsTime 20 minute

20251030T150419 [CommandExec]:got command set profile_station.Lat 36.797 degree

20251030T150419 [CommandExec]:got command set profile_station.Lon -121.847 degree

20251030T150419 [CommandExec]:got command set profile_station.YoYoMaxDepth 100 meter

20251030T150452 [CommandExec]:got command set profile_station.MaxDepth 105 meter

20251030T150452 [CommandExec]:got command set profile_station:NeedComms.WaitForPitchUp 20 minute

20251030T150452 [CommandExec]:got command set profile_station:StandardEnvelopes.MaxDepth 100 meter

20251030T150452 [CommandExec]:got command set profile_station:BackseatDriver.EnableBackseat 1 bool

20251030T150452 [MissionManager]:Started mission profile_station

20251030T151108 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20251030T154015 [BPC1]:Battery stick #50 (s/n: 019C) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.

20251030T160435 [BPC1]:Battery stick #50 (s/n: 019C) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.

20251030T162945 [CommandExec]:got command schedule asap "load Transport/keepstation_3km.tl;set keepstation_3km:keepstation.NeedCommsTime 20 min;set keepstation_3km:keepstation.Latitude 36.806966 degree;set keepstation_3km:keepstation.Longitude -121.824326 degree" 4pr9o 1 2.000000

20251030T162945 [CommandExec]:Scheduling command #1 of 2 with id=4pr9o

20251030T162945 [CommandExec]:Scheduled #22 (#1 of 2 with id='4pr9o'): "load Transport/keepstation_3km.tl;set keepstation_3km:keepstation.NeedCommsTime 20 min;set keepstation_3km:keepstation.Latitude 36.806966 degree;set keepstation_3km:keepstation.Longitude -121.824326 degree", ASAP

20251030T163002 [CommandExec]:got command schedule asap "set keepstation_3km:BackseatDriver.EnableBackseat 1 bool;run" 4pr9o 2 2.000000

20251030T163002 [CommandExec]:Scheduling command #2 of 2 with id=4pr9o

20251030T163002 [CommandExec]:Scheduled #23 (#2 of 2 with id='4pr9o'): "set keepstation_3km:BackseatDriver.EnableBackseat 1 bool;run", ASAP

20251030T163002 [CommandExec]:got command load ./Missions/Transport/keepstation_3km.tl

20251030T163007 [CommandExec]:Loaded ./Missions/Transport/keepstation_3km.tl id=keepstation_3km

20251030T163032 [CommandExec]:got command set keepstation_3km:keepstation.NeedCommsTime 20 minute

20251030T163032 [CommandExec]:got command set keepstation_3km:keepstation.Latitude 36.806966 degree

20251030T163032 [CommandExec]:got command set keepstation_3km:keepstation.Longitude -121.824326 degree

20251030T163050 [CommandExec]:got command set

20251030T163050 [CommandExec]:Incomplete syntax. Try: help set

20251030T163853 [Default:CheckIn:E]:Default mission has been running for 8.759113 min

20251030T164317 [CommandExec]:got command load ./Missions/Transport/transit.tl

20251030T164319 [CommandExec]:Loaded ./Missions/Transport/transit.tl id=transit

20251030T164339 [CommandExec]:got command set transit.NeedCommsTime 20 minute

20251030T164339 [CommandExec]:got command set transit.Latitude 36.806966 degree

20251030T164339 [CommandExec]:got command set transit.Longitude -121.824326 degree

20251030T164339 [CommandExec]:got command set transit:BackseatDriver.EnableBackseat 1 bool

20251030T164339 [MissionManager]:Started mission transit

20251030T164341 [transit:Transit:Wpt1.Waypoint]:Navigating to waypoint: 36.806965,-121.824326

20251030T164341 [transit:StandardEnvelopes:A.AltitudeEnvelope]:Altitude Measurement is not Active.

20251030T170331 [CommandExec]:got command stop

20251030T170331 [CommandExec]:Scheduling is paused

20251030T170333 [CommandExec]:got command stop

20251030T170931 [Default:CheckIn:E]:Default mission has been running for 5.999937 min