ahi Path

trajectory

20250708T180035 [CommandExec]:got command restart logs

20250708T180124 [CommandExec]:got command run ./Missions/Maintenance/ballast_and_trim.tl

20250708T180138 [CommandExec]:Running ./Missions/Maintenance/ballast_and_trim.tl

20250708T180138 [MissionManager]:Started mission ballast_and_trim

20250708T180141 [CTD_Seabird]:Failed to parse device response: #

20250708T180142 [CTD_Seabird]:Salinity reading out of range: 0.509444 psu

20250708T180143 [CTD_Seabird]:Salinity reading out of range: 0.515486 psu

20250708T180144 [CTD_Seabird]:Salinity reading out of range: 0.520259 psu

20250708T181938 [CommandExec]:got command gfscan

20250708T181939 [GFScanner]:Beginning ground fault scan

20250708T182940 completed. Estimation time: 10.01 minutes.

20250708T182940 persisted config values to: 187.340798 cc buoyancy neutral and 24.710863 mm mass default

20250708T183245 [NAL9602]:Failed to initiate SBD session. Error code: 2

20250708T183329 [NAL9602]:Failed to initiate SBD session. Error code: 2

20250708T183417 [NAL9602]:Failed to initiate SBD session. Error code: 2

20250708T183602 [MissionManager]:Started mission Default

20250708T183602 [WetLabsBB2FL]:LCB fault: LCB Watchdog Reset. Invalid Command. Hardware Overcurrent Shutdown. Current Limiter Activated.

20250708T183602 [WetLabsBB2FL]:Hardware Fault

20250708T183602 [CBIT]:Hardware Fault in component: WetLabsBB2FL

20250708T183744 [BPC1]:BPC1B got IPBS message with 6 sticks (min is 7).

20250708T183758 [BPC1]:BPC1B got IPBS message with 6 sticks (min is 7).

20250708T183812 [BPC1]:BPC1B got IPBS message with 6 sticks (min is 7).

20250708T184216 [Default:CheckIn:E]:Default mission has been running for 6.229600 min

20250708T184238 [BPC1]:BPC1A got IPBS message with 6 sticks (min is 7).

20250708T184238 [CommandExec]:got command run ./Missions/Maintenance/calibrate_sparton_compass.tl

20250708T184258 [CommandExec]:Running ./Missions/Maintenance/calibrate_sparton_compass.tl

20250708T184258 [MissionManager]:Started mission calibrate_sparton_compass

20250708T184300 [calibrate_sparton_compass:N.AltitudeEnvelope]:Altitude Measurement is not Active.

20250708T184302 [CTD_Seabird]:Failed to parse device response: #

20250708T190206 [BPC1]:BPC1A failed to parse battery data due to unrecognized msg size.

20250708T190532 [BPC1]:Battery stick #24 (s/n: 01D3) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.

20250708T190532 [BPC1]:Battery stick #29 (s/n: 00A7) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.

20250708T190532 [BPC1]:Battery stick #51 (s/n: 01D6) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.

20250708T190532 [BPC1]:Battery stick #57 (s/n: 019F) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.

20250708T190532 [BPC1]:Battery stick #59 (s/n: 0184) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.

20250708T190532 [BPC1]:Failed to receive data from all sticks prior to timeout. Will not retry this scan cycle.

20250708T191645 [Sonardyne_Nano]:Failed to parse response: >VS:2311,HPR45,EXT,TILT##

20250708T193712 [CTD_Seabird]:Failed to parse device response: 04,2524.99#

20250708T193935 [CTD_Seabird]:Failed to parse device response: 9.83,12.2818,#

20250708T194259 [AHRS_M2]:Acquired 8 calibration points.

20250708T194259 [MissionManager]:Started mission Default

20250708T194300 [AHRS_M2]:Magnetic calibration quality (0[best] to 10000) is 0.000040.

20250708T194444 [CommandExec]:got command schedule asap "load Science/profile_station.tl;set profile_station.Lat 36.69599 degree;set profile_station.Lon -122.04693 degree;set profile_station.YoYoMaxDepth 40 m;set profile_station.MaxDepth 50 m" 401lj 1 2.000000

20250708T194444 [CommandExec]:Scheduling command #1 of 2 with id=401lj

20250708T194444 [CommandExec]:Scheduled #1 (#1 of 2 with id='401lj'): "load Science/profile_station.tl;set profile_station.Lat 36.69599 degree;set profile_station.Lon -122.04693 degree;set profile_station.YoYoMaxDepth 40 m;set profile_station.MaxDepth 50 m", ASAP

20250708T194526 [CommandExec]:got command schedule asap "set profile_station:BackseatDriver.EnableBackseat 1 bool;run" 401lj 2 2.000000

20250708T194526 [CommandExec]:Scheduling command #2 of 2 with id=401lj

20250708T194526 [CommandExec]:Scheduled #2 (#2 of 2 with id='401lj'): "set profile_station:BackseatDriver.EnableBackseat 1 bool;run", ASAP

20250708T194527 [CommandExec]:got command load ./Missions/Science/profile_station.tl

20250708T194538 [CommandExec]:Loaded ./Missions/Science/profile_station.tl id=profile_station

20250708T194557 [CommandExec]:got command set profile_station.Lat 36.69599 degree

20250708T194557 [CommandExec]:got command set profile_station.Lon -122.04693 degree

20250708T194557 [CommandExec]:got command set profile_station.YoYoMaxDepth 40 meter

20250708T194557 [CommandExec]:got command set profile_station.MaxDepth 50 meter

20250708T194606 [CommandExec]:got command set profile_station:BackseatDriver.EnableBackseat 1 bool

20250708T194606 [CommandExec]:got command run

20250708T194606 [CommandExec]:Running

20250708T194606 [MissionManager]:Started mission profile_station

20250708T194609 [CTD_Seabird]:Failed to parse device response: #

20250708T194741 [BackseatComponent]:ptvr: Running Planktivore backseat app. Logging to: 20250708T194737, NVMEDATA = 11428972 B

20250708T194743 [Depth_Keller]:Failed to copy Depth_Keller.enableBroadcast's data value to LCM message.

20250708T202631 [BPC1]:BPC1B failed to parse battery data due to unrecognized msg size.

20250708T203116 [BPC1]:BPC1B failed to parse battery data due to unrecognized msg size.

20250708T203634 [BPC1]:Battery stick #24 (s/n: 01D3) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.

20250708T203634 [BPC1]:Battery stick #29 (s/n: 00A7) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.

20250708T203634 [BPC1]:Battery stick #57 (s/n: 019F) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.

20250708T203634 [BPC1]:Battery stick #59 (s/n: 0184) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.

20250708T203634 [BPC1]:Failed to receive data from all sticks prior to timeout. Will not retry this scan cycle.

20250708T203916 [CTD_Seabird]:Failed to parse device response: .31#

20250708T211111 [CTD_Seabird]:Failed to parse device response: 14.54,11.846883#

20250708T213823 [CTD_Seabird]:Failed to parse device response: 8.12,11.558.20#

20250708T214938 [BPC1]:BPC1B: No match for serial number 1717 in BPC1B's battery stick inventory (sticks 32-62 in onboard configuration file).

20250708T220734 [BPC1]:Battery stick #29 (s/n: 00A7) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.

20250708T220734 [BPC1]:Battery stick #57 (s/n: 019F) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.

20250708T220734 [BPC1]:Battery stick #59 (s/n: 0184) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.

20250708T220734 [BPC1]:Failed to receive data from 5 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 24, 29, 51, 57, 59.

20250708T224448 [BPC1]:BPC1A: No match for serial number 1717 in BPC1A's battery stick inventory (sticks 1-31 in onboard configuration file).

20250708T224836 [BPC1]:Failed to receive data from 5 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 24, 29, 51, 57, 59.

20250708T230310 [BPC1]:BPC1A failed to parse battery data due to unrecognized msg size.

20250708T230813 [CommandExec]:got command set profile_station.MissionTimeout 9 hour

20250708T231419 [Radio_Surface]:LCB fault: Hardware Overcurrent Shutdown.

20250708T231419 [Radio_Surface]:Hardware Fault

20250708T231419 [CBIT]:Hardware Fault in component: Radio_Surface

20250708T232613 [BPC1]:BPC1B failed to parse battery data due to unrecognized msg size.

20250708T232637 [GFScanner]:Beginning ground fault scan

20250708T232938 [BPC1]:Failed to receive data from 15 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 9, 10, 11, 13, 14, 15, 16, 24, 29, 34, 35, 51, 53, 57, 59.

20250709T001040 [BPC1]:Failed to receive data from 15 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 9, 10, 11, 13, 14, 15, 16, 24, 29, 34, 35, 51, 53, 57, 59.

20250709T003050 [BPC1]:BPC1A: No match for serial number 1717 in BPC1A's battery stick inventory (sticks 1-31 in onboard configuration file).

20250709T003958 [CTD_Seabird]:Failed to parse device response: .87#

20250709T005141 [BPC1]:Failed to receive data from 16 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 9, 10, 11, 12, 13, 14, 15, 16, 24, 29, 34, 35, 51, 53, 57, 59.

20250709T011948 [CommandExec]:got command schedule asap "configSet Express none _.planktivore_LM_AvgRois persist; " 40iet 1 5.000000

20250709T011948 [CommandExec]:Scheduling command #1 of 5 with id=40iet

20250709T011948 [CommandExec]:Scheduled #3 (#1 of 5 with id='40iet'): "configSet Express none _.planktivore_LM_AvgRois persist; ", ASAP

20250709T012013 [CommandExec]:got command schedule asap "configSet Express none _.planktivore_HM_AvgRois persist;" 40iet 2 5.000000

20250709T012013 [CommandExec]:Scheduling command #2 of 5 with id=40iet

20250709T012013 [CommandExec]:Scheduled #4 (#2 of 5 with id='40iet'): "configSet Express none _.planktivore_HM_AvgRois persist;", ASAP

20250709T012051 [CommandExec]:got command schedule asap "configSet Express mostRecent _.planktivore_HM_AvgRois persist" 40iet 3 5.000000

20250709T012051 [CommandExec]:Scheduling command #3 of 5 with id=40iet

20250709T012051 [CommandExec]:Scheduled #5 (#3 of 5 with id='40iet'): "configSet Express mostRecent _.planktivore_HM_AvgRois persist", ASAP

20250709T012143 [BPC1]:BPC1A failed to parse battery data due to unrecognized msg size.

20250709T012159 [BPC1]:BPC1B: No match for serial number FF7F in BPC1B's battery stick inventory (sticks 32-62 in onboard configuration file).

20250709T012310 [CommandExec]:got command schedule asap " " 40iet 4 5.000000

20250709T012310 [CommandExec]:Scheduled #6 (#4 of 5 with id='40iet'): " ", ASAP

20250709T012333 [CommandExec]:got command schedule asap "configSet Express mostRecent _.planktivore_LM_AvgRois persist" 40iet 5 5.000000

20250709T012333 [CommandExec]:Scheduled #7 (#5 of 5 with id='40iet'): "configSet Express mostRecent _.planktivore_LM_AvgRois persist", ASAP

20250709T012335 [CommandExec]:got command configSet Express none _.planktivore_LM_AvgRois persist

20250709T012335 [CommandExec]:got command

20250709T012335 [CommandExec]:Syntax error. Try: help

20250709T012337 [CommandExec]:got command configSet Express none _.planktivore_HM_AvgRois persist

20250709T012338 [CommandExec]:got command configSet Express mostRecent _.planktivore_HM_AvgRois persist

20250709T012340 [CommandExec]:got command configSet Express mostRecent _.planktivore_LM_AvgRois persist

20250709T012740 [CTD_Seabird]:Failed to parse device response: .94#

20250709T013043 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20250709T013243 [BPC1]:Failed to receive data from 16 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 9, 10, 11, 12, 13, 14, 15, 16, 24, 29, 34, 35, 51, 53, 57, 59.

20250709T015104 [CTD_Seabird]:Failed to parse device response: 59,3147.08#

20250709T015848 [BPC1]:BPC1B: No match for serial number 1717 in BPC1B's battery stick inventory (sticks 32-62 in onboard configuration file).

20250709T021059 [CTD_Seabird]:Failed to parse device response: 24.68,11.684.13#

20250709T021345 [BPC1]:Failed to receive data from 16 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 9, 10, 11, 12, 13, 14, 15, 16, 24, 29, 34, 35, 51, 53, 57, 59.

20250709T022635 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20250709T031738 [BPC1]:BPC1B: No match for serial number 1717 in BPC1B's battery stick inventory (sticks 32-62 in onboard configuration file).

20250709T033236 [CommandExec]:got command schedule asap "load Science/profile_station.tl;set profile_station.MissionTimeout 12 h;set profile_station.Lat 36.69599 degree;set profile_station.Lon -122.04693 degree;set profile_station.YoYoMaxDepth 40 m;set profile_station.Speed 0.8 m/s" 40oj8 1 2.000000

20250709T033236 [CommandExec]:Scheduling command #1 of 2 with id=40oj8

20250709T033236 [CommandExec]:Scheduled #8 (#1 of 2 with id='40oj8'): "load Science/profile_station.tl;set profile_station.MissionTimeout 12 h;set profile_station.Lat 36.69599 degree;set profile_station.Lon -122.04693 degree;set profile_station.YoYoMaxDepth 40 m;set profile_station.Speed 0.8 m/s", ASAP

20250709T033249 [CommandExec]:got command schedule asap "set profile_station.MaxDepth 50 m;set profile_station:BackseatDriver.EnableBackseat 1 bool;run" 40oj8 2 2.000000

20250709T033249 [CommandExec]:Scheduling command #2 of 2 with id=40oj8

20250709T033249 [CommandExec]:Scheduled #9 (#2 of 2 with id='40oj8'): "set profile_station.MaxDepth 50 m;set profile_station:BackseatDriver.EnableBackseat 1 bool;run", ASAP

20250709T033249 [CommandExec]:got command load ./Missions/Science/profile_station.tl

20250709T033301 [CommandExec]:Loaded ./Missions/Science/profile_station.tl id=profile_station

20250709T033301 [MissionManager]:Started mission Default

20250709T033328 [CommandExec]:got command set profile_station.MissionTimeout 12 hour

20250709T033328 [CommandExec]:got command set profile_station.Lat 36.69599 degree

20250709T033328 [CommandExec]:got command set profile_station.Lon -122.04693 degree

20250709T033328 [CommandExec]:got command set profile_station.YoYoMaxDepth 40 meter

20250709T033328 [CommandExec]:got command set profile_station.Speed 0.8 meter_per_second

20250709T033344 [CommandExec]:got command set profile_station.MaxDepth 50 meter

20250709T033344 [CommandExec]:got command set profile_station:BackseatDriver.EnableBackseat 1 bool

20250709T033344 [CommandExec]:got command run

20250709T033344 [CommandExec]:Running

20250709T033344 [MissionManager]:Started mission profile_station

20250709T033532 [BackseatComponent]:ptvr: Running Planktivore backseat app. Logging to: 20250709T033520, NVMEDATA = 160533884 B

20250709T033534 [Depth_Keller]:Failed to copy Depth_Keller.enableBroadcast's data value to LCM message.

20250709T033549 [BPC1]:Battery stick #16 (s/n: 00F8) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.

20250709T033549 [BPC1]:Failed to receive data from 15 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 9, 10, 11, 12, 13, 14, 15, 24, 29, 34, 35, 51, 53, 57, 59.

20250709T034237 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20250709T040502 [CTD_Seabird]:Failed to parse device response: 0,3.79695,3124.63#

20250709T040549 [BPC1]:BPC1A: No match for serial number 1717 in BPC1A's battery stick inventory (sticks 1-31 in onboard configuration file).

20250709T041651 [BPC1]:Battery stick #16 (s/n: 00F8) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.

20250709T041651 [BPC1]:Failed to receive data from 14 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 9, 10, 11, 12, 13, 14, 15, 24, 29, 35, 51, 53, 57, 59.

20250709T043853 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20250709T044235 [BPC1]:Battery stick #52 (s/n: 0160) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.

20250709T052638 [GFScanner]:Beginning ground fault scan

20250709T052830 [Radio_Surface]:LCB fault: LCB Watchdog Reset.

20250709T052830 [Radio_Surface]:Hardware Fault

20250709T052830 [CBIT]:Hardware Fault in component: Radio_Surface

20250709T061336 [BPC1]:Battery stick #40 (s/n: 01A4) reported OVER_TEMP_ALARM. Status code: 0x1717.

20250709T061336 [BPC1]:Battery stick #52 (s/n: 0160) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.

20250709T061336 [BPC1]:Failed to receive data from 14 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 9, 10, 11, 12, 13, 14, 15, 24, 29, 35, 51, 53, 57, 59.

20250709T065235 [NAL9602]:Inadequate Iridium signal strength reported: 0

20250709T065239 [NAL9602]:Inadequate Iridium signal strength reported: 0

20250709T065246 [NAL9602]:Inadequate Iridium signal strength reported: 0

20250709T065438 [BPC1]:Battery stick #52 (s/n: 0160) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.

20250709T065438 [BPC1]:Failed to receive data from 13 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 9, 10, 11, 12, 13, 14, 24, 29, 35, 51, 53, 57, 59.

20250709T072346 [CTD_Seabird]:Failed to parse device response: 76#

20250709T073540 [BPC1]:Failed to receive data from 14 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 9, 10, 11, 12, 13, 14, 24, 29, 35, 51, 52, 53, 57, 59.

20250709T083042 [CTD_Seabird]:Failed to parse device response: 33.87,11.156.93#

20250709T093845 [BPC1]:Failed to receive data from 13 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 9, 10, 11, 13, 14, 24, 29, 35, 51, 52, 53, 57, 59.

20250709T101347 [ThrusterHE]:Status lock Detected.

20250709T101348 [ThrusterHE]:Status lock Detected.

20250709T101349 [ThrusterHE]:Status lock Detected.

20250709T101352 [ThrusterHE]:Internal error reported. Error codes are not defined in interface spec.

20250709T101352 [ThrusterHE]:Thruster failed to initialize

20250709T101352 [ThrusterHE]:Communications Fault

20250709T101352 [CBIT]:Communications Fault in component: ThrusterHE

20250709T101947 [BPC1]:Failed to receive data from 13 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 9, 10, 11, 13, 14, 24, 29, 35, 51, 52, 53, 57, 59.

20250709T113152 [CTD_Seabird]:Failed to parse device response: 17.75.49#

20250709T115545 [CTD_Seabird]:Failed to parse device response: 2.55,13.787244#

20250709T115852 [CTD_Seabird]:Failed to parse device response: 14,3198.55#

20250709T130355 [BPC1]:Battery stick #41 (s/n: 0289) reported OVER_TEMP_ALARM. Status code: 0x1717.

20250709T132226 [ThrusterHE]:Internal error reported. Error codes are not defined in interface spec.

20250709T135310 [CTD_Seabird]:Failed to parse device response: 8#

20250709T141602 [ElevatorServo]:Invalid EZ Servo response:"6\r"

20250709T141602 [ElevatorServo]:Communications Fault

20250709T141602 [ElevatorServo]:Elevator reporting null position

20250709T141602 [CBIT]:Communications Fault in component: ElevatorServo

20250709T143357 [DataOverHttps]:Server acknowledged file Logs/20250708T180035/Express0091.lzma, not

20250709T145758 [CTD_Seabird]:Failed to parse device response: 1,3.98314,3979.10#

20250709T150700 [BPC1]:Battery stick #16 (s/n: 00F8) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.

20250709T153347 [ThrusterHE]:Internal error reported. Error codes are not defined in interface spec.

20250709T153447 [CommandExec]:got command schedule asap "load Science/profile_station.tl;set profile_station.MissionTimeout 2 h;set profile_station.NeedCommsTime 30 min;set profile_station.Lat 36.69599 degree;set profile_station.Lon -122.04693 degree;set profile_station.YoYoMaxDepth 40 m" 41lbx 1 2.000000

20250709T153447 [CommandExec]:Scheduling command #1 of 2 with id=41lbx

20250709T153447 [CommandExec]:Scheduled #10 (#1 of 2 with id='41lbx'): "load Science/profile_station.tl;set profile_station.MissionTimeout 2 h;set profile_station.NeedCommsTime 30 min;set profile_station.Lat 36.69599 degree;set profile_station.Lon -122.04693 degree;set profile_station.YoYoMaxDepth 40 m", ASAP

20250709T153938 [CommandExec]:got command schedule asap "set profile_station.Speed 0.8 m/s;set profile_station.MaxDepth 50 m;set profile_station:BackseatDriver.EnableBackseat 1 bool;run" 41lbx 2 2.000000

20250709T153938 [CommandExec]:Scheduling command #2 of 2 with id=41lbx

20250709T153938 [CommandExec]:Scheduled #11 (#2 of 2 with id='41lbx'): "set profile_station.Speed 0.8 m/s;set profile_station.MaxDepth 50 m;set profile_station:BackseatDriver.EnableBackseat 1 bool;run", ASAP

20250709T153939 [CommandExec]:got command load ./Missions/Science/profile_station.tl

20250709T153949 [CommandExec]:Loaded ./Missions/Science/profile_station.tl id=profile_station

20250709T154013 [CommandExec]:got command set profile_station.MissionTimeout 2 hour

20250709T154013 [CommandExec]:got command set profile_station.NeedCommsTime 30 minute

20250709T154013 [CommandExec]:got command set profile_station.Lat 36.69599 degree

20250709T154013 [CommandExec]:got command set profile_station.Lon -122.04693 degree

20250709T154013 [CommandExec]:got command set profile_station.YoYoMaxDepth 40 meter

20250709T154031 [CommandExec]:got command set profile_station.Speed 0.8 meter_per_second

20250709T154031 [CommandExec]:got command set profile_station.MaxDepth 50 meter

20250709T154031 [CommandExec]:got command set profile_station:BackseatDriver.EnableBackseat 1 bool

20250709T154031 [CommandExec]:got command run

20250709T154031 [CommandExec]:Running

20250709T154031 [MissionManager]:Started mission profile_station

20250709T154236 [BackseatComponent]:ptvr: Running Planktivore backseat app. Logging to: 20250709T154211, NVMEDATA = 446595720 B

20250709T154238 [Depth_Keller]:Failed to copy Depth_Keller.enableBroadcast's data value to LCM message.

20250709T161412 [CTD_Seabird]:Failed to parse device response: 28.41,11.5727,#

20250709T164442 [CTD_Seabird]:Failed to parse device response: 1.05,13.556524#

20250709T164637 [CTD_Seabird]:Failed to parse device response: 20.76.19#

20250709T165324 [CTD_Seabird]:Failed to parse device response: 0.12,13.6255,#