ahi Path

trajectory

20250403T085939 [BPC1]:BPC1A got IPBS message with 6 sticks (min is 7).

20250403T085943 [SBIT]:Listing configuration overrides from Data/persisted.cfg

20250403T085943 [SBIT]:BPC1.batteryMissingStickThreshold=12 count;#

20250403T085943 [SBIT]:CTD_Seabird.loadAtStartup=0 bool;#

20250403T085943 [SBIT]:ESPComponent.sampleTimeout=5 minute;#

20250403T085943 [SBIT]:Express linearApproximation TrackAcousticContact.range_to_contact 15.000000 meter;#

20250403T085943 [SBIT]:Express linearApproximation _.planktivore_HM_AvgRois 1.000000 count_per_second;#

20250403T085943 [SBIT]:Express linearApproximation _.planktivore_LM_AvgRois 25.000000 count_per_second;#

20250403T085943 [SBIT]:Express linearApproximation _.planktivore_caseHumidity 10.000000 percent;#

20250403T085943 [SBIT]:Express none _.planktivore_diatoms;#

20250403T085943 [SBIT]:Express none _.planktivore_dinoflagellates;#

20250403T085943 [SBIT]:Express none _.predict_plankton_data_pct_dinos_sqerr;#

20250403T085943 [SBIT]:Express linearApproximation height_above_sea_floor 10.000000 meter;#

20250403T085943 [SBIT]:GFScanner.loadAtStartup=1 bool;#

20250403T085943 [SBIT]:GFScanner.simulateHardware=0 bool;#

20250403T085943 [SBIT]:IBIT.batteryCapacityThreshold=-0.5 ampere_hour;#

20250403T085943 [SBIT]:IBIT.batteryVoltageThreshold=10 volt;#

20250403T085943 [SBIT]:VerticalControl.buoyancyNeutral=367.909096 cubic_centimeter;#

20250403T085943 [SBIT]:VerticalControl.massDefault=15.898413 millimeter;#

20250403T085943 [SBIT]:Waterlinked.loadAtStartup=1 bool;#

20250403T085943 [MissionManager]:Started mission Startup

20250403T085950 [BPC1]:BPC1A got IPBS message with 6 sticks (min is 7).

20250403T090001 [BPC1]:BPC1A got IPBS message with 6 sticks (min is 7).

20250403T090007 [NAL9602]:Failed to initiate SBD session. Error code: 2

20250403T090032 [BPC1]:BPC1B got IPBS message with 6 sticks (min is 7).

20250403T090046 [MissionManager]:Started mission Default

20250403T090046 [BPC1]:BPC1B got IPBS message with 6 sticks (min is 7).

20250403T090100 [BPC1]:BPC1B got IPBS message with 6 sticks (min is 7).

20250403T090111 [NAL9602]:Failed to initiate SBD session. Error code: 2

20250403T090504 [CommandExec]:got command schedule asap "load Transport/keepstation.tl;set keepstation.MissionTimeout 7 h;set keepstation.NeedCommsTime 30 min;set keepstation.Latitude 36.797 degree;set keepstation.Longitude -121.847 degree;set keepstation.DepthDeadband 10 m" 46p7y 1 2.000000

20250403T090504 [CommandExec]:Scheduling command #1 of 2 with id=46p7y

20250403T090504 [CommandExec]:Scheduled #1 (#1 of 2 with id='46p7y'): "load Transport/keepstation.tl;set keepstation.MissionTimeout 7 h;set keepstation.NeedCommsTime 30 min;set keepstation.Latitude 36.797 degree;set keepstation.Longitude -121.847 degree;set keepstation.DepthDeadband 10 m", ASAP

20250403T090513 [CommandExec]:got command schedule asap "set keepstation.Speed 0.9 m/s;set keepstation.MaxDepth 50 m;run" 46p7y 2 2.000000

20250403T090513 [CommandExec]:Scheduling command #2 of 2 with id=46p7y

20250403T090513 [CommandExec]:Scheduled #2 (#2 of 2 with id='46p7y'): "set keepstation.Speed 0.9 m/s;set keepstation.MaxDepth 50 m;run", ASAP

20250403T090513 [CommandExec]:got command load ./Missions/Transport/keepstation.tl

20250403T090515 [CommandExec]:Loaded ./Missions/Transport/keepstation.tl id=keepstation

20250403T090530 [CommandExec]:got command set keepstation.MissionTimeout 7 hour

20250403T090530 [CommandExec]:got command set keepstation.NeedCommsTime 30 minute

20250403T090530 [CommandExec]:got command set keepstation.Latitude 36.797 degree

20250403T090530 [CommandExec]:got command set keepstation.Longitude -121.847 degree

20250403T090530 [CommandExec]:got command set keepstation.DepthDeadband 10 meter

20250403T090535 [CommandExec]:got command set keepstation.Speed 0.9 meter_per_second

20250403T090535 [CommandExec]:got command set keepstation.MaxDepth 50 meter

20250403T090535 [CommandExec]:got command run

20250403T090535 [CommandExec]:Running

20250403T090535 [MissionManager]:Started mission keepstation

20250403T090537 [keepstation:StandardEnvelopes:A.AltitudeEnvelope]:Altitude Measurement is not Active.

20250403T090741 [NAL9602]:Failed to initiate SBD session. Error code: 2

20250403T090812 [keepstation:TransitToStation:Wpt1.Waypoint]:Navigating to waypoint: 36.797001,-121.847000

20250403T091442 [Waterlinked]:only read 0 of 1 data item for BIT error. Device response::TS,24052713073647,.0, 0.0,1475.0, 0#

20250403T092827 [BPC1]:Battery stick #21 (s/n: 01C7) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x0AD0.

20250403T092827 [BPC1]:Battery stick #22 (s/n: 00C0) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x0AD0.

20250403T092827 [BPC1]:Battery stick #30 (s/n: 015F) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x0AD0.

20250403T092827 [BPC1]:Battery stick #59 (s/n: 0184) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.

20250403T092827 [BPC1]:Failed to receive data from all sticks prior to timeout. Will not retry this scan cycle.

20250403T093353 [Waterlinked]:only read 0 of 1 data item for BIT error. Device response::TS,240 +0, +0, +0, +0,V#

20250403T094420 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20250403T101635 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20250403T102710 [keepstation:StandardEnvelopes:A.AltitudeEnvelope]:Altitude envelope ACTIVE

20250403T103025 [BPC1]:BPC1B: No match for serial number 1717 in BPC1B's battery stick inventory (sticks 32-62 in onboard configuration file).

20250403T103320 [Waterlinked]:only read 0 of 1 data item for altitude. Device response::BD, +0.00, +0.00, +0.0#

20250403T103756 [Waterlinked]:only read 3 of 5 data items. Device response::BI, +0, +0, +0,V#

20250403T104616 [Waterlinked]:only read 0 of 1 data item for BIT error. Device response::TS,24052713263980, ,1475.0, 0#

20250403T104824 [BPC1]:BPC1B: No match for serial number 1717 in BPC1B's battery stick inventory (sticks 32-62 in onboard configuration file).

20250403T104838 [BPC1]:BPC1B failed to parse battery data due to unrecognized msg size.

20250403T105219 [BPC1]:BPC1B: No match for serial number 1717 in BPC1B's battery stick inventory (sticks 32-62 in onboard configuration file).

20250403T105645 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20250403T105927 [BPC1]:Battery stick #21 (s/n: 01C7) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x0AD0.

20250403T105927 [BPC1]:Battery stick #30 (s/n: 015F) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x0AD0.

20250403T105927 [BPC1]:Battery stick #59 (s/n: 0184) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.

20250403T105928 [BPC1]:Failed to receive data from all sticks prior to timeout. Will not retry this scan cycle.

20250403T110954 [keepstation:TransitToStation:Wpt1.Waypoint]:Reached waypoint: 36.797001,-121.847000

20250403T111128 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20250403T111841 [keepstation:StandardEnvelopes:A.AltitudeEnvelope]:Altitude envelope ACTIVE

20250403T120154 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20250403T121107 [BPC1]:BPC1A failed to parse battery data due to unrecognized msg size.

20250403T122047 [BPC1]:BPC1A failed to parse battery data due to unrecognized msg size.

20250403T122858 [keepstation:StandardEnvelopes:A.AltitudeEnvelope]:Altitude envelope ACTIVE

20250403T123028 [BPC1]:Battery stick #30 (s/n: 015F) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x0AD0.

20250403T123028 [BPC1]:Battery stick #59 (s/n: 0184) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.

20250403T123028 [BPC1]:Failed to receive data from all sticks prior to timeout. Will not retry this scan cycle.

20250403T123527 [Waterlinked]:only read 0 of 1 data item for BIT error. Device response::TS,2405271 0.0, +0.0, 0.0,1475.0, 0#

20250403T123645 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20250403T131123 [Waterlinked]:DVL uart error: serial timeout

20250403T131123 [Waterlinked]:Communications Fault

20250403T131124 [CBIT]:Communications Fault in component: Waterlinked

20250403T131339 [Waterlinked]:only read 3 of 5 data items. Device response::BI, +0, 0, +0,V#

20250403T132045 [NAL9602]:LCB fault: Invalid Command. Hardware Overcurrent Shutdown. Current Limiter Activated.

20250403T132045 [CBIT]:Hardware Fault in component: NAL9602

20250403T132046 [NAL9602]:LCB fault: Invalid Command. Hardware Overcurrent Shutdown. Current Limiter Activated.

20250403T132158 [NAL9602]:parseGSV uart error: serial timeout

20250403T133801 [BPC1]:BPC1B failed to parse battery data due to unrecognized msg size.

20250403T140129 [BPC1]:Failed to receive data from 4 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 21, 22, 30, 59.

20250403T141539 [BPC1]:BPC1B failed to parse battery data due to unrecognized msg size.

20250403T141631 [BPC1]:BPC1A: No match for serial number 1717 in BPC1A's battery stick inventory (sticks 1-31 in onboard configuration file).

20250403T144231 [BPC1]:Failed to receive data from 4 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 21, 22, 30, 59.

20250403T145725 [GFScanner]:Beginning ground fault scan

20250403T145928 [CommandExec]:got command schedule asap "load Transport/keepstation.tl;set keepstation.MissionTimeout 3 h;set keepstation.NeedCommsTime 30 min;set keepstation.Latitude 36.806966 degree;set keepstation.Longitude -121.824326 degree;set keepstation.Depth 15 m" 473qe 1 2.000000

20250403T145928 [CommandExec]:Scheduling command #1 of 2 with id=473qe

20250403T145928 [CommandExec]:Scheduled #3 (#1 of 2 with id='473qe'): "load Transport/keepstation.tl;set keepstation.MissionTimeout 3 h;set keepstation.NeedCommsTime 30 min;set keepstation.Latitude 36.806966 degree;set keepstation.Longitude -121.824326 degree;set keepstation.Depth 15 m", ASAP

20250403T145936 [CommandExec]:got command schedule asap "set keepstation.MaxDepth 30 m;run" 473qe 2 2.000000

20250403T145936 [CommandExec]:Scheduling command #2 of 2 with id=473qe

20250403T145936 [CommandExec]:Scheduled #4 (#2 of 2 with id='473qe'): "set keepstation.MaxDepth 30 m;run", ASAP

20250403T145937 [CommandExec]:got command load ./Missions/Transport/keepstation.tl

20250403T145938 [CommandExec]:Loaded ./Missions/Transport/keepstation.tl id=keepstation

20250403T145939 [MissionManager]:Started mission Default

20250403T145955 [CommandExec]:got command set keepstation.MissionTimeout 3 hour

20250403T145955 [CommandExec]:got command set keepstation.NeedCommsTime 30 minute

20250403T145955 [CommandExec]:got command set keepstation.Latitude 36.806966 degree

20250403T145955 [CommandExec]:got command set keepstation.Longitude -121.824326 degree

20250403T145955 [CommandExec]:got command set keepstation.Depth 15 meter

20250403T145958 [CommandExec]:got command set keepstation.MaxDepth 30 meter

20250403T145958 [CommandExec]:got command run

20250403T145958 [CommandExec]:Running

20250403T145958 [MissionManager]:Started mission keepstation

20250403T150119 [keepstation:TransitToStation:Wpt1.Waypoint]:Navigating to waypoint: 36.806965,-121.824326

20250403T150753 [Waterlinked]:only read 3 of 5 data items. Device response::BI, +0, +0, +0, :BS, +0, +0, +0,V#

20250403T150836 [Waterlinked]:only read 0 of 1 data item for BIT error. Device response::TS,24052713080310, 0. +0, +0, +0, +0,V#

20250403T151455 [Waterlinked]:only read 0 of 1 data item for BIT error. Device response::TS,24052713142228, 0.0, +0.0, 0.0, 0#

20250403T152333 [BPC1]:Failed to receive data from 13 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 9, 10, 11, 12, 13, 14, 21, 22, 29, 30, 35, 53, 59.

20250403T152939 [Waterlinked]:only read 0 of 1 data item for altitude. Device response::BD, +0.00, 00#

20250403T154058 [Radio_Surface]:LCB fault: LCB Watchdog Reset. Invalid Command.

20250403T154058 [Radio_Surface]:Hardware Fault

20250403T154058 [CBIT]:Hardware Fault in component: Radio_Surface

20250403T154226 [Waterlinked]:only read 0 of 1 data item for BIT error. Device response::TS,240527134153 +0.0, 0.0,1475.0, 0#

20250403T155315 [BPC1]:BPC1A failed to parse battery data due to unrecognized msg size.

20250403T160435 [BPC1]:Failed to receive data from 13 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 9, 10, 11, 12, 13, 14, 21, 22, 29, 30, 35, 53, 59.

20250403T160937 [keepstation:TransitToStation:Wpt1.Waypoint]:Reached waypoint: 36.806965,-121.824326

20250403T161311 [Waterlinked]:only read 0 of 1 data item for altitude. Device response::BD, +0.00, +#

20250403T163320 [Waterlinked]:DVL uart error: serial timeout

20250403T163320 [Waterlinked]:Communications Fault

20250403T163320 [CBIT]:Communications Fault in component: Waterlinked

20250403T164245 [Waterlinked]:only read 1 of 5 data items. Device response::BI, -40.00#

20250403T164537 [BPC1]:Failed to receive data from 13 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 9, 10, 11, 12, 13, 14, 21, 22, 29, 30, 35, 53, 59.

20250403T171010 [Waterlinked]:DVL uart error: serial timeout

20250403T171010 [Waterlinked]:Communications Fault

20250403T171010 [CBIT]:Communications Fault in component: Waterlinked

20250403T171211 [Waterlinked]:only read 3 of 5 data items. Device response::BI, +118.00, 27.86, 0.00#

20250403T172639 [BPC1]:Failed to receive data from 14 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 9, 10, 11, 12, 13, 14, 21, 22, 29, 30, 35, 52, 53, 59.

20250403T173138 [CommandExec]:got command stop

20250403T173138 [CommandExec]:Scheduling is paused

20250403T173139 [MissionManager]:Started mission Default

20250403T173534 [CommandExec]:got command stop

20250403T173746 [CommandExec]:got command load ./Missions/Transport/transit.tl

20250403T173749 [CommandExec]:Loaded ./Missions/Transport/transit.tl id=transit

20250403T173803 [CommandExec]:got command set transit.NeedCommsTime 15 minute

20250403T173803 [CommandExec]:got command set transit.Latitude 36.8066 degree

20250403T173803 [CommandExec]:got command set transit.Longitude -121.79547 degree

20250403T173803 [CommandExec]:got command set transit.Depth 5 meter

20250403T173803 [CommandExec]:got command set transit.MinOffshore 0.02 kilometer

20250403T173803 [CommandExec]:got command run

20250403T173803 [CommandExec]:Running

20250403T173803 [MissionManager]:Started mission transit

20250403T173804 [transit:Transit:Wpt1.Waypoint]:Navigating to waypoint: 36.806599,-121.795471

20250403T173911 [transit:StandardEnvelopes:A.AltitudeEnvelope]:Altitude envelope ACTIVE

20250403T174136 [Waterlinked]:only read 0 of 1 data item for altitude. Device response::BD, +0.00, +0.0 0.00#

20250403T174548 [Waterlinked]:only read 0 of 1 data item for BIT error. Device response::TS,24052713373294+0,V#

20250403T180741 [BPC1]:Failed to receive data from 14 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 9, 10, 11, 12, 13, 14, 21, 22, 29, 30, 35, 52, 53, 59.

20250403T182359 [Waterlinked]:only read 0 of 5 data items. Device response::BI, -,A#

20250403T183643 [transit:StandardEnvelopes:A.AltitudeEnvelope]:Altitude envelope ACTIVE

20250403T184337 [CommandExec]:got command run ./Missions/Engineering/joystick_backseat.tl

20250403T184339 [CommandExec]:Running ./Missions/Engineering/joystick_backseat.tl

20250403T184339 [MissionManager]:Started mission joystick_backseat

20250403T184354 [joystick_backseat:SpeedTimeout:B]:Speed timeout reached. Stopping vehicle (speed 0.000000 m/s ).

20250403T184358 [Waterlinked]:only read 0 of 1 data item for altitude. Device response::BD, +0.00, +0. +0.00, 48.20, 0.00#

20250403T184409 [joystick_backseat:SpeedTimeout:B]:Speed timeout reached. Stopping vehicle (speed 0.000000 m/s ).

20250403T184425 [joystick_backseat:SpeedTimeout:B]:Speed timeout reached. Stopping vehicle (speed 0.000000 m/s ).

20250403T184449 [CommandExec]:got command ! echo 1 > /dev/loadC4

20250403T184500 [joystick_backseat:JoystickControl:CheckIn:E]:Joystick mission has been running for 1.349190 min

20250403T184528 [BPC1]:BPC1A: No match for serial number 1717 in BPC1A's battery stick inventory (sticks 1-31 in onboard configuration file).

20250403T184545 [BackseatComponent]:ptvr: Running Planktivore backseat app. Logging to: 20250403T184511, NVMEDATA = 333240404 B

20250403T184548 [Depth_Keller]:Failed to copy Depth_Keller.enableBroadcast's data value to LCM message.

20250403T184619 [BackseatComponent]:netra: running plankton_proxies.predict backseat application.

20250403T184621 [BackseatComponent]:Failed to create a data reader. CTD_Seabird.enableBroadcast is unknown.

20250403T184621 [BackseatComponent]:Failed to request data from CTD_Seabird.enableBroadcast.

20250403T184622 [WetLabsBB2FL]:Failed to copy WetLabsBB2FL.enableBroadcast's data value to LCM message.

20250403T184624 [BackseatComponent]:Failed to create a data reader. CTD_Seabird.enableBroadcast is unknown.

20250403T184624 [BackseatComponent]:Failed to request data from CTD_Seabird.enableBroadcast.

20250403T184626 [BackseatComponent]:Failed to create a data reader. CTD_Seabird.enableBroadcast is unknown.

20250403T184626 [BackseatComponent]:Failed to request data from CTD_Seabird.enableBroadcast.

20250403T184626 [joystick_backseat:JoystickControl:CheckIn:E]:Joystick mission has been running for 2.785715 min

20250403T184709 [ThrusterHE]:Zero Speed Commanded.

20250403T184733 [joystick_backseat:JoystickControl:CheckIn:E]:Joystick mission has been running for 3.897306 min

20250403T184813 [ThrusterHE]:Could not get status:serial timeout

20250403T184814 [ThrusterHE]:getSpeed error serial timeout

20250403T184814 [ThrusterHE]:Thruster uart error: serial timeout

20250403T184814 [ThrusterHE]:Communications Fault

20250403T184814 [CBIT]:Communications Fault in component: ThrusterHE

20250403T184817 [ThrusterHE]:Internal error reported. Error codes are not defined in interface spec.

20250403T184817 [ThrusterHE]:Thruster failed to initialize

20250403T184817 [ThrusterHE]:Communications Fault

20250403T184817 [CBIT]:Communications Fault in component: ThrusterHE

20250403T184842 [BPC1]:Failed to receive data from 14 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 9, 10, 11, 12, 13, 14, 21, 22, 29, 30, 35, 52, 53, 59.

20250403T185010 [CommandExec]:got command configSet VerticalControl.massDefault -2.5 centimeter persist

20250403T185054 [ThrusterHE]:Could not get status:serial timeout

20250403T185054 [ThrusterHE]:getSpeed error serial timeout

20250403T185054 [ThrusterHE]:Thruster uart error: serial timeout

20250403T185054 [ThrusterHE]:Communications Fault

20250403T185054 [CBIT]:Communications Fault in component: ThrusterHE

20250403T185201 [Waterlinked]:only read -1 of 1 data item for altitude. Device response::BD, #

20250403T185229 [Waterlinked]:only read 0 of 1 data item for altitude. Device response::BD, +0.00, +0.00, +000#

20250403T185401 [CommandExec]:got command configSet VerticalControl.massDefault -2.1 centimeter persist

20250403T185430 [CommandExec]:got command load ./Missions/Engineering/joystick_backseat.tl

20250403T185431 [CommandExec]:Loaded ./Missions/Engineering/joystick_backseat.tl id=joystick_backseat

20250403T185441 [CommandExec]:got command set joystick_backseat.ElevatorAngle -12 degree

20250403T185441 [MissionManager]:Started mission joystick_backseat

20250403T185449 [ThrusterHE]:Zero Speed Commanded.

20250403T185529 [ThrusterHE]:Could not get status:serial timeout

20250403T185658 [CommandExec]:got command load ./Missions/Engineering/joystick_backseat.tl

20250403T185701 [CommandExec]:Loaded ./Missions/Engineering/joystick_backseat.tl id=joystick_backseat

20250403T185712 [CommandExec]:got command set joystick_backseat.ElevatorAngle -10 degree

20250403T185712 [MissionManager]:Started mission joystick_backseat

20250403T185809 [ThrusterHE]:getSpeed error serial timeout

20250403T185809 [ThrusterHE]:Thruster uart error: serial timeout

20250403T185933 [ThrusterHE]:Zero Speed Commanded.

20250403T190004 [BackseatComponent]:ptvr: Running Planktivore backseat app. Logging to: 20250403T185929, NVMEDATA = 335137212 B

20250403T190005 [Depth_Keller]:Failed to copy Depth_Keller.enableBroadcast's data value to LCM message.

20250403T190043 [CommandExec]:got command set joystick_backseat.ElevatorAngle -9 degree

20250403T190051 [RudderServo]:getPosition uart error serial timeout

20250403T190051 [RudderServo]:Rudder uart error - getPosition..serial timeout

20250403T190051 [RudderServo]:Communications Fault

20250403T190051 [CBIT]:Communications Fault in component: RudderServo

20250403T190629 [Waterlinked]:only read 0 of 5 data items. Device response::BI, - +129, -359, -364,A#

20250403T190909 [Waterlinked]:only read -1 of 1 data item for altitude. Device response::BD, +0.00, +0.00, #

20250403T191813 [CommandExec]:got command configSet VerticalControl.massDefault -1.8 centimeter persist

20250403T191941 [Waterlinked]:only read 0 of 1 data item for BIT error. Device response::TS,24052713482644, 0, 0.0,1475.0, 0#

20250403T192100 [CommandExec]:got command configSet VerticalControl.massDefault -1 centimeter persist

20250403T200936 [CommandExec]:got command stop