2018-01-25T21:18:02.544Z,1516915082.544 [Supervisor](DEBUG): Initializing supervisor.
2018-01-25T21:18:02.547Z,1516915082.547 [SyncHandler](DEBUG): Created PCaller Thread at 404514E0
2018-01-25T21:18:02.548Z,1516915082.548 [SyncHandler](INFO): Protected caller Thread ID is 7155
2018-01-25T21:18:02.548Z,1516915082.548 [ComponentRegistry](DEBUG): Component "controlThread" handled in its own thread.
2018-01-25T21:18:02.549Z,1516915082.549 [controlThread ThreadHandler](DEBUG): Created PCaller Thread at 404814E0
2018-01-25T21:18:02.549Z,1516915082.549 [controlThread ThreadHandler](INFO): Protected caller Thread ID is 7156
2018-01-25T21:18:02.552Z,1516915082.552 [ComponentRegistry](DEBUG): SyncComponent "CycleStarter" handled in the control thread.
2018-01-25T21:18:02.563Z,1516915082.563 [ComponentRegistry](DEBUG): Component "CommandLine" handled in its own thread.
2018-01-25T21:18:02.564Z,1516915082.564 [CommandLine ThreadHandler](DEBUG): Created PCaller Thread at 404B14E0
2018-01-25T21:18:02.564Z,1516915082.564 [CommandLine ThreadHandler](INFO): Protected caller Thread ID is 7157
2018-01-25T21:18:02.565Z,1516915082.565 [ComponentRegistry](DEBUG): Component "logger" handled in its own thread.
2018-01-25T21:18:02.566Z,1516915082.566 [logger ThreadHandler](DEBUG): Created PCaller Thread at 404E14E0
2018-01-25T21:18:02.566Z,1516915082.566 [logger ThreadHandler](INFO): Protected caller Thread ID is 7158
2018-01-25T21:18:02.568Z,1516915082.568 [ComponentRegistry](DEBUG): SyncComponent "LogSplitter" handled in the control thread.
2018-01-25T21:18:02.568Z,1516915082.568 [Supervisor](INFO): Looking for Config files in directory: Config/
2018-01-25T21:18:02.570Z,1516915082.570 [Supervisor](INFO): Opening Config file at: Config/BIT.cfg
2018-01-25T21:18:02.739Z,1516915082.739 [ComponentRegistry](DEBUG): Loaded Config Component "Config/BIT
2018-01-25T21:18:02.739Z,1516915082.739 [Supervisor](INFO): Opening Config file at: Config/Derivation.cfg
2018-01-25T21:18:02.869Z,1516915082.869 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Derivation
2018-01-25T21:18:02.870Z,1516915082.870 [Supervisor](INFO): Opening Config file at: Config/Control.cfg
2018-01-25T21:18:03.163Z,1516915083.163 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Control
2018-01-25T21:18:03.164Z,1516915083.164 [Supervisor](INFO): Opening Config file at: Config/Estimation.cfg
2018-01-25T21:18:03.290Z,1516915083.290 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Estimation
2018-01-25T21:18:03.291Z,1516915083.291 [Supervisor](INFO): Opening Config file at: Config/Guidance.cfg
2018-01-25T21:18:03.369Z,1516915083.369 [Supervisor](INFO): Opening Config file at: Config/Navigation.cfg
2018-01-25T21:18:03.551Z,1516915083.551 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Navigation
2018-01-25T21:18:03.551Z,1516915083.551 [Supervisor](INFO): Opening Config file at: Config/Sample.cfg
2018-01-25T21:18:03.645Z,1516915083.645 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sample
2018-01-25T21:18:03.645Z,1516915083.645 [Supervisor](INFO): Opening Config file at: Config/Science.cfg
2018-01-25T21:18:03.947Z,1516915083.947 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Science
2018-01-25T21:18:03.947Z,1516915083.947 [Supervisor](INFO): Opening Config file at: Config/Sensor.cfg
2018-01-25T21:18:04.265Z,1516915084.265 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sensor
2018-01-25T21:18:04.265Z,1516915084.265 [Supervisor](INFO): Opening Config file at: Config/Servo.cfg
2018-01-25T21:18:04.534Z,1516915084.534 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Servo
2018-01-25T21:18:04.535Z,1516915084.535 [Supervisor](INFO): Opening Config file at: Config/Simulator.cfg
2018-01-25T21:18:04.990Z,1516915084.990 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Simulator
2018-01-25T21:18:04.990Z,1516915084.990 [Supervisor](INFO): Opening Config file at: Config/logger.cfg
2018-01-25T21:18:05.173Z,1516915085.173 [ComponentRegistry](DEBUG): Loaded Config Component "Config/logger
2018-01-25T21:18:05.173Z,1516915085.173 [Supervisor](INFO): Opening Config file at: Config/secure.cfg
2018-01-25T21:18:05.266Z,1516915085.266 [ComponentRegistry](DEBUG): Loaded Config Component "Config/secure
2018-01-25T21:18:05.267Z,1516915085.267 [Supervisor](INFO): Opening Config file at: Config/vehicle.cfg
2018-01-25T21:18:05.691Z,1516915085.691 [ComponentRegistry](DEBUG): Loaded Config Component "Config/vehicle
2018-01-25T21:18:05.691Z,1516915085.691 [Supervisor](INFO): Opening Config file at: Config/workSite.cfg
2018-01-25T21:18:05.792Z,1516915085.792 [ComponentRegistry](DEBUG): Loaded Config Component "Config/workSite
2018-01-25T21:18:05.794Z,1516915085.794 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-ahi/
2018-01-25T21:18:05.795Z,1516915085.795 [Supervisor](INFO): Opening Config file at: Config/lrauv-ahi/Battery.cfg
2018-01-25T21:18:06.006Z,1516915086.006 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Battery
2018-01-25T21:18:06.007Z,1516915086.007 [Supervisor](INFO): Opening Config file at: Config/lrauv-ahi/BIT.cfg
2018-01-25T21:18:06.099Z,1516915086.099 [Supervisor](INFO): Opening Config file at: Config/lrauv-ahi/Navigation.cfg
2018-01-25T21:18:06.196Z,1516915086.196 [Supervisor](INFO): Opening Config file at: Config/lrauv-ahi/Control.cfg
2018-01-25T21:18:06.287Z,1516915086.287 [Supervisor](INFO): Opening Config file at: Config/lrauv-ahi/Simulator.cfg
2018-01-25T21:18:06.370Z,1516915086.370 [Supervisor](INFO): Opening Config file at: Config/lrauv-ahi/Science.cfg
2018-01-25T21:18:06.504Z,1516915086.504 [Supervisor](INFO): Opening Config file at: Config/lrauv-ahi/Sensor.cfg
2018-01-25T21:18:06.658Z,1516915086.658 [Supervisor](INFO): Opening Config file at: Config/lrauv-ahi/Servo.cfg
2018-01-25T21:18:06.759Z,1516915086.759 [Supervisor](INFO): Opening Config file at: Config/lrauv-ahi/logger.cfg
2018-01-25T21:18:06.851Z,1516915086.851 [Supervisor](INFO): Opening Config file at: Config/lrauv-ahi/secure.cfg
2018-01-25T21:18:06.931Z,1516915086.931 [Supervisor](INFO): Opening Config file at: Config/lrauv-ahi/vehicle.cfg
2018-01-25T21:18:07.082Z,1516915087.082 [Supervisor](IMPORTANT): Reading configuration overrides from Data/persisted.cfg
2018-01-25T21:18:07.087Z,1516915087.087 [Module Loader](DEBUG): Loading Module at Modules/BIT.so
2018-01-25T21:18:07.211Z,1516915087.211 [SBIT](DEBUG): Construct Startup Built In Test.
2018-01-25T21:18:07.240Z,1516915087.240 [SBIT] Loaded
2018-01-25T21:18:07.241Z,1516915087.241 [ComponentRegistry](DEBUG): SyncComponent "SBIT" handled in the control thread.
2018-01-25T21:18:07.241Z,1516915087.241 [IBIT](DEBUG): Construct Initiated Built In Test.
2018-01-25T21:18:07.267Z,1516915087.267 [IBIT] Loaded
2018-01-25T21:18:07.268Z,1516915087.268 [ComponentRegistry](DEBUG): SyncComponent "IBIT" handled in the control thread.
2018-01-25T21:18:07.271Z,1516915087.271 [CBIT](DEBUG): Construct Continuous Built In Test.
2018-01-25T21:18:07.418Z,1516915087.418 [CBIT] Loaded
2018-01-25T21:18:07.418Z,1516915087.418 [ComponentRegistry](DEBUG): SyncComponent "CBIT" handled in the control thread.
2018-01-25T21:18:07.418Z,1516915087.418 [Module Loader](DEBUG): Loaded Module: BIT (Contains the BuiltInTest components, such as C Built In Test)
2018-01-25T21:18:07.419Z,1516915087.419 [Module Loader](DEBUG): Loading Module at Modules/Control.so
2018-01-25T21:18:07.561Z,1516915087.561 [VerticalControl](DEBUG): Construct VerticalControl.
2018-01-25T21:18:07.656Z,1516915087.656 [VerticalControl] Loaded
2018-01-25T21:18:07.656Z,1516915087.656 [ComponentRegistry](DEBUG): SyncComponent "VerticalControl" handled in the control thread.
2018-01-25T21:18:07.657Z,1516915087.657 [HorizontalControl](DEBUG): Construct HorizontalControl.
2018-01-25T21:18:07.715Z,1516915087.715 [HorizontalControl] Loaded
2018-01-25T21:18:07.715Z,1516915087.715 [ComponentRegistry](DEBUG): SyncComponent "HorizontalControl" handled in the control thread.
2018-01-25T21:18:07.716Z,1516915087.716 [SpeedControl](DEBUG): Construct SpeedControl.
2018-01-25T21:18:07.721Z,1516915087.721 [SpeedControl] Loaded
2018-01-25T21:18:07.721Z,1516915087.721 [ComponentRegistry](DEBUG): SyncComponent "SpeedControl" handled in the control thread.
2018-01-25T21:18:07.722Z,1516915087.722 [LoopControl](DEBUG): Construct LoopControl.
2018-01-25T21:18:07.723Z,1516915087.723 [LoopControl] Loaded
2018-01-25T21:18:07.723Z,1516915087.723 [ComponentRegistry](DEBUG): SyncComponent "LoopControl" handled in the control thread.
2018-01-25T21:18:07.723Z,1516915087.723 [Module Loader](DEBUG): Loaded Module: Control (Contains the Control components, such as Depth, Heading, and Speed Control)
2018-01-25T21:18:07.724Z,1516915087.724 [Module Loader](DEBUG): Loading Module at Modules/Derivation.so
2018-01-25T21:18:07.763Z,1516915087.763 [DepthRateCalculator] Loaded
2018-01-25T21:18:07.763Z,1516915087.763 [ComponentRegistry](DEBUG): SyncComponent "DepthRateCalculator" handled in the control thread.
2018-01-25T21:18:07.769Z,1516915087.769 [PitchRateCalculator] Loaded
2018-01-25T21:18:07.769Z,1516915087.769 [ComponentRegistry](DEBUG): SyncComponent "PitchRateCalculator" handled in the control thread.
2018-01-25T21:18:07.784Z,1516915087.784 [SpeedCalculator] Loaded
2018-01-25T21:18:07.785Z,1516915087.785 [ComponentRegistry](DEBUG): SyncComponent "SpeedCalculator" handled in the control thread.
2018-01-25T21:18:07.805Z,1516915087.805 [TempGradientCalculator] Loaded
2018-01-25T21:18:07.805Z,1516915087.805 [ComponentRegistry](DEBUG): SyncComponent "TempGradientCalculator" handled in the control thread.
2018-01-25T21:18:07.820Z,1516915087.820 [VerticalTemperatureHomogeneityIndexCalculator] Loaded
2018-01-25T21:18:07.821Z,1516915087.821 [ComponentRegistry](DEBUG): SyncComponent "VerticalTemperatureHomogeneityIndexCalculator" handled in the control thread.
2018-01-25T21:18:07.825Z,1516915087.825 [YawRateCalculator] Loaded
2018-01-25T21:18:07.826Z,1516915087.826 [ComponentRegistry](DEBUG): SyncComponent "YawRateCalculator" handled in the control thread.
2018-01-25T21:18:07.826Z,1516915087.826 [Module Loader](DEBUG): Loaded Module: Derivation (Contains the base derivation components)
2018-01-25T21:18:07.827Z,1516915087.827 [Module Loader](DEBUG): Loading Module at Modules/Estimation.so
2018-01-25T21:18:07.908Z,1516915087.908 [StratificationFrontDetector](INFO): threshold set to: 0.399988 degC
2018-01-25T21:18:07.909Z,1516915087.909 [StratificationFrontDetector](DEBUG): (re)initializing
2018-01-25T21:18:07.909Z,1516915087.909 [StratificationFrontDetector] Loaded
2018-01-25T21:18:07.909Z,1516915087.909 [ComponentRegistry](DEBUG): SyncComponent "StratificationFrontDetector" handled in the control thread.
2018-01-25T21:18:07.910Z,1516915087.910 [Module Loader](DEBUG): Loaded Module: Estimation (Contains the base estimation components)
2018-01-25T21:18:07.910Z,1516915087.910 [Module Loader](DEBUG): Loading Module at Modules/Guidance.so
2018-01-25T21:18:08.139Z,1516915088.139 [Module Loader](DEBUG): Loaded Module: Guidance (Contains behaviors and commands)
2018-01-25T21:18:08.139Z,1516915088.139 [Module Loader](DEBUG): Loading Module at Modules/Navigation.so
2018-01-25T21:18:08.232Z,1516915088.232 [DeadReckonUsingMultipleVelocitySources] Loaded
2018-01-25T21:18:08.232Z,1516915088.232 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingMultipleVelocitySources" handled in the control thread.
2018-01-25T21:18:08.283Z,1516915088.283 [DeadReckonUsingSpeedCalculator] Loaded
2018-01-25T21:18:08.284Z,1516915088.284 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingSpeedCalculator" handled in the control thread.
2018-01-25T21:18:08.336Z,1516915088.336 [DeadReckonWithRespectToSeafloor] Loaded
2018-01-25T21:18:08.336Z,1516915088.336 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonWithRespectToSeafloor" handled in the control thread.
2018-01-25T21:18:08.352Z,1516915088.352 [NavChart] Loaded
2018-01-25T21:18:08.352Z,1516915088.352 [ComponentRegistry](DEBUG): SyncComponent "NavChart" handled in the control thread.
2018-01-25T21:18:08.356Z,1516915088.356 [UniversalFixResidualReporter] Loaded
2018-01-25T21:18:08.356Z,1516915088.356 [ComponentRegistry](DEBUG): SyncComponent "UniversalFixResidualReporter" handled in the control thread.
2018-01-25T21:18:08.357Z,1516915088.357 [Module Loader](DEBUG): Loaded Module: Navigation (Contains the base navigation components)
2018-01-25T21:18:08.357Z,1516915088.357 [Module Loader](DEBUG): Loading Module at Modules/Sample.so
2018-01-25T21:18:08.385Z,1516915088.385 [Module Loader](DEBUG): Loaded Module: Sample (This is a Sample Module of Sample Components)
2018-01-25T21:18:08.385Z,1516915088.385 [Module Loader](DEBUG): Loading Module at Modules/Science.so
2018-01-25T21:18:08.531Z,1516915088.531 [Aanderaa_O2] Loaded
2018-01-25T21:18:08.531Z,1516915088.531 [ComponentRegistry](DEBUG): SyncComponent "Aanderaa_O2" handled in the control thread.
2018-01-25T21:18:08.577Z,1516915088.577 [CTD_Seabird] Loaded
2018-01-25T21:18:08.577Z,1516915088.577 [ComponentRegistry](DEBUG): Component "CTD_Seabird" handled in its own thread.
2018-01-25T21:18:08.578Z,1516915088.578 [CTD_Seabird ThreadHandler](DEBUG): Created PCaller Thread at 406D54E0
2018-01-25T21:18:08.579Z,1516915088.579 [CTD_Seabird ThreadHandler](INFO): Protected caller Thread ID is 7237
2018-01-25T21:18:08.593Z,1516915088.593 [PAR_Licor] Loaded
2018-01-25T21:18:08.593Z,1516915088.593 [ComponentRegistry](DEBUG): SyncComponent "PAR_Licor" handled in the control thread.
2018-01-25T21:18:08.640Z,1516915088.640 [WetLabsBB2FL] Loaded
2018-01-25T21:18:08.641Z,1516915088.641 [ComponentRegistry](DEBUG): Component "WetLabsBB2FL" handled in its own thread.
2018-01-25T21:18:08.642Z,1516915088.642 [WetLabsBB2FL ThreadHandler](DEBUG): Created PCaller Thread at 407054E0
2018-01-25T21:18:08.642Z,1516915088.642 [WetLabsBB2FL ThreadHandler](INFO): Protected caller Thread ID is 7238
2018-01-25T21:18:08.642Z,1516915088.642 [Module Loader](DEBUG): Loaded Module: Science (Contains the science components)
2018-01-25T21:18:08.643Z,1516915088.643 [Module Loader](DEBUG): Loading Module at Modules/Sensor.so
2018-01-25T21:18:08.896Z,1516915088.896 [DataOverHttps] Loaded
2018-01-25T21:18:08.897Z,1516915088.897 [ComponentRegistry](DEBUG): SyncComponent "DataOverHttps" handled in the control thread.
2018-01-25T21:18:08.984Z,1516915088.984 [NAL9602] Loaded
2018-01-25T21:18:08.984Z,1516915088.984 [ComponentRegistry](DEBUG): SyncComponent "NAL9602" handled in the control thread.
2018-01-25T21:18:08.989Z,1516915088.989 [Onboard] Loaded
2018-01-25T21:18:08.990Z,1516915088.990 [ComponentRegistry](DEBUG): SyncComponent "Onboard" handled in the control thread.
2018-01-25T21:18:08.996Z,1516915088.996 [Radio_Surface] Loaded
2018-01-25T21:18:08.997Z,1516915088.997 [ComponentRegistry](DEBUG): Component "Radio_Surface" handled in its own thread.
2018-01-25T21:18:08.998Z,1516915088.998 [Radio_Surface ThreadHandler](DEBUG): Created PCaller Thread at 409494E0
2018-01-25T21:18:08.998Z,1516915088.998 [Radio_Surface ThreadHandler](INFO): Protected caller Thread ID is 7239
2018-01-25T21:18:09.123Z,1516915089.123 [DAT] Loaded
2018-01-25T21:18:09.123Z,1516915089.123 [ComponentRegistry](DEBUG): SyncComponent "DAT" handled in the control thread.
2018-01-25T21:18:09.169Z,1516915089.169 [PNI_TCM] Loaded
2018-01-25T21:18:09.169Z,1516915089.169 [ComponentRegistry](DEBUG): SyncComponent "PNI_TCM" handled in the control thread.
2018-01-25T21:18:09.170Z,1516915089.170 [Module Loader](DEBUG): Loaded Module: Sensor (Contains the sensor components)
2018-01-25T21:18:09.170Z,1516915089.170 [Module Loader](DEBUG): Loading Module at Modules/Servo.so
2018-01-25T21:18:09.265Z,1516915089.265 [BuoyancyServo] Loaded
2018-01-25T21:18:09.265Z,1516915089.265 [ComponentRegistry](DEBUG): SyncComponent "BuoyancyServo" handled in the control thread.
2018-01-25T21:18:09.276Z,1516915089.276 [ElevatorServo] Loaded
2018-01-25T21:18:09.276Z,1516915089.276 [ComponentRegistry](DEBUG): SyncComponent "ElevatorServo" handled in the control thread.
2018-01-25T21:18:09.287Z,1516915089.287 [MassServo] Loaded
2018-01-25T21:18:09.287Z,1516915089.287 [ComponentRegistry](DEBUG): SyncComponent "MassServo" handled in the control thread.
2018-01-25T21:18:09.301Z,1516915089.301 [RudderServo] Loaded
2018-01-25T21:18:09.302Z,1516915089.302 [ComponentRegistry](DEBUG): SyncComponent "RudderServo" handled in the control thread.
2018-01-25T21:18:09.312Z,1516915089.312 [ThrusterServo] Loaded
2018-01-25T21:18:09.312Z,1516915089.312 [ComponentRegistry](DEBUG): SyncComponent "ThrusterServo" handled in the control thread.
2018-01-25T21:18:09.313Z,1516915089.313 [Module Loader](DEBUG): Loaded Module: Servo (This is the module containing motor controllers)
2018-01-25T21:18:09.313Z,1516915089.313 [Module Loader](DEBUG): Loading Module at Modules/Simulator.so
2018-01-25T21:18:09.427Z,1516915089.427 [Module Loader](DEBUG): Loaded Module: Simulator (This is the module containing the Simulator)
2018-01-25T21:18:09.427Z,1516915089.427 [Module Loader](DEBUG): Loading Module at Modules/Trigger.so
2018-01-25T21:18:09.451Z,1516915089.451 [Module Loader](DEBUG): Loaded Module: Trigger (Contains triggers for use in missions)
2018-01-25T21:18:09.454Z,1516915089.454 [ComponentRegistry](DEBUG): SyncComponent "MissionManager" handled in the control thread.
2018-01-25T21:18:09.455Z,1516915089.455 [ComponentRegistry](DEBUG): SyncComponent "Reporter" handled in the control thread.
2018-01-25T21:18:09.461Z,1516915089.461 [ComponentRegistry](DEBUG): Component "NavChartDb" handled in its own thread.
2018-01-25T21:18:09.462Z,1516915089.462 [NavChartDb ThreadHandler](DEBUG): Created PCaller Thread at 409F04E0
2018-01-25T21:18:09.463Z,1516915089.463 [NavChartDb ThreadHandler](INFO): Protected caller Thread ID is 7240
2018-01-25T21:18:09.467Z,1516915089.467 [Supervisor](INFO): Main Thread ID is 7154
2018-01-25T21:18:09.468Z,1516915089.468 [Supervisor](DEBUG): Running supervisor.
2018-01-25T21:18:09.468Z,1516915089.468 [CommandLine ThreadHandler](INFO): Handler Thread ID is 7241
2018-01-25T21:18:09.471Z,1516915089.471 [controlThread ThreadHandler](INFO): Handler Thread ID is 7242
2018-01-25T21:18:09.471Z,1516915089.471 [controlThread](DEBUG): Initializing ControlThread
2018-01-25T21:18:09.472Z,1516915089.472 [SBIT](INFO): Initialize SBIT Component.
2018-01-25T21:18:09.473Z,1516915089.473 [SBIT](IMPORTANT): git: 2018-01-24
2018-01-25T21:18:09.473Z,1516915089.473 [SBIT](INFO): git hash: c51822596c95463f12f83368464fde1f2cde3448
2018-01-25T21:18:09.473Z,1516915089.473 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8
2018-01-25T21:18:09.474Z,1516915089.474 [SBIT](INFO): Kernel Reporting Different Version From Configuration.
Kernel Expected: #639 PREEMPT Wed Mar 12 12:53:33 PDT 2014
Kernel Reported: #2 PREEMPT Thu Jan 11 20:13:48 PST 2018
2018-01-25T21:18:09.475Z,1516915089.475 [SBIT](INFO): Beginning SBIT in 71.000000 seconds.
2018-01-25T21:18:09.476Z,1516915089.476 [IBIT](INFO): Initialize IBIT Component.
2018-01-25T21:18:09.477Z,1516915089.477 [CBIT](DEBUG): Initialize CBIT Component.
2018-01-25T21:18:09.477Z,1516915089.477 [CBIT](INFO): Last reboot was NOT due to watchdog timer.
2018-01-25T21:18:09.478Z,1516915089.478 [logger ThreadHandler](INFO): Handler Thread ID is 7243
2018-01-25T21:18:09.505Z,1516915089.505 [CTD_Seabird ThreadHandler](INFO): Handler Thread ID is 7244
2018-01-25T21:18:09.506Z,1516915089.506 [CTD_Seabird](INFO): Initializing
2018-01-25T21:18:09.506Z,1516915089.506 [CTD_Seabird](INFO): Checking LCM
2018-01-25T21:18:09.515Z,1516915089.515 [CTD_Seabird](INFO): LCM OK
2018-01-25T21:18:09.515Z,1516915089.515 [CTD_Seabird](INFO): Powering up
2018-01-25T21:18:09.521Z,1516915089.521 [WetLabsBB2FL ThreadHandler](INFO): Handler Thread ID is 7245
2018-01-25T21:18:09.523Z,1516915089.523 [WetLabsBB2FL](INFO): Powering down
2018-01-25T21:18:09.549Z,1516915089.549 [Radio_Surface ThreadHandler](INFO): Handler Thread ID is 7246
2018-01-25T21:18:09.554Z,1516915089.554 [Radio_Surface](INFO): Powering up
2018-01-25T21:18:09.561Z,1516915089.561 [NavChartDb ThreadHandler](INFO): Handler Thread ID is 7247
2018-01-25T21:18:09.564Z,1516915089.564 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US1WC07M.000
2018-01-25T21:18:09.564Z,1516915089.564 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US1WC07M.000
2018-01-25T21:18:09.565Z,1516915089.565 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US2WC11M.000
2018-01-25T21:18:09.565Z,1516915089.565 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US2WC11M.000
2018-01-25T21:18:09.565Z,1516915089.565 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US3CA52M.000
2018-01-25T21:18:09.565Z,1516915089.565 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US3CA52M.000
2018-01-25T21:18:09.565Z,1516915089.565 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US4CA60M.000
2018-01-25T21:18:09.565Z,1516915089.565 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US4CA60M.000
2018-01-25T21:18:09.566Z,1516915089.566 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA50M.000
2018-01-25T21:18:09.566Z,1516915089.566 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA50M.000
2018-01-25T21:18:09.566Z,1516915089.566 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA61M.000
2018-01-25T21:18:09.566Z,1516915089.566 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA61M.000
2018-01-25T21:18:09.566Z,1516915089.566 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA62M.000
2018-01-25T21:18:09.567Z,1516915089.567 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA62M.000
2018-01-25T21:18:09.567Z,1516915089.567 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA83M.000
2018-01-25T21:18:09.567Z,1516915089.567 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA83M.000
2018-01-25T21:18:09.585Z,1516915089.585 [VerticalControl](DEBUG): Initialize VerticalControlComponent.
2018-01-25T21:18:09.586Z,1516915089.586 [HorizontalControl](DEBUG): Initialize HorizontalControlComponent.
2018-01-25T21:18:09.587Z,1516915089.587 [SpeedControl](DEBUG): Initialize SpeedControlComponent.
2018-01-25T21:18:09.587Z,1516915089.587 [LoopControl](DEBUG): Initialize LoopControlComponent.
2018-01-25T21:18:09.588Z,1516915089.588 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2018-01-25T21:18:09.588Z,1516915089.588 [PitchRateCalculator](DEBUG): Initializing PitchRateCalculator.
2018-01-25T21:18:09.588Z,1516915089.588 [SpeedCalculator](DEBUG): Initializing SpeedCalculator.
2018-01-25T21:18:09.589Z,1516915089.589 [TempGradientCalculator](DEBUG): Initializing TempGradientCalculator.
2018-01-25T21:18:09.589Z,1516915089.589 [VerticalTemperatureHomogeneityIndexCalculator](DEBUG): (re)initializing
2018-01-25T21:18:09.590Z,1516915089.590 [YawRateCalculator](DEBUG): Initializing YawRateCalculator.
2018-01-25T21:18:09.590Z,1516915089.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-25T21:18:09.591Z,1516915089.591 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T21:18:09.591Z,1516915089.591 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T21:18:09.592Z,1516915089.592 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-25T21:18:09.592Z,1516915089.592 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T21:18:09.592Z,1516915089.592 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T21:18:09.593Z,1516915089.593 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-25T21:18:09.593Z,1516915089.593 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T21:18:09.593Z,1516915089.593 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T21:18:09.594Z,1516915089.594 [NavChart](DEBUG): Initialize NavChart Navigation.
2018-01-25T21:18:09.594Z,1516915089.594 [UniversalFixResidualReporter](DEBUG): Initializing UniversalFixResidualReporter component.
2018-01-25T21:18:09.600Z,1516915089.600 [MissionManager](INFO): Loading Mission: Missions/Startup.xml
2018-01-25T21:18:09.622Z,1516915089.622 [Startup:A.GoToSurface](DEBUG): Construct GoToSurface.
2018-01-25T21:18:09.648Z,1516915089.648 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
       xmlns:Control="Tethys/Control"
       xmlns:Guidance="Tethys/Guidance" 
       xmlns:Units="Tethys/Units"
       xmlns:Universal="Tethys/Universal"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
                           Tethys/Control http://okeanids.mbari.org/tethys/Xml/Control.xsd
                           Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
                           Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
                           Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
       Id="Startup">

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="StartupSatComms">

        <Sequence/>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:latitude_fix/>
        </ReadDatum>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:platform_communications/>
        </ReadDatum>

    </Aggregate>

</Mission>


2018-01-25T21:18:09.649Z,1516915089.649 [MissionManager](INFO): Loading Mission: Missions/Default.xml
2018-01-25T21:18:09.720Z,1516915089.720 [MissionManager](INFO): DefineArg Default.ElapsedSinceDefaultStarted = 0.000000 min
2018-01-25T21:18:09.721Z,1516915089.721 [Default:A.Wait](DEBUG): Construct Wait.
2018-01-25T21:18:09.723Z,1516915089.723 [Default:B.GoToSurface](DEBUG): Construct GoToSurface.
2018-01-25T21:18:09.748Z,1516915089.748 [Default:CheckIn:Read_Iridium:A_Timeout:A.Execute](DEBUG): Construct Execute.
2018-01-25T21:18:09.771Z,1516915089.771 [Default:CheckIn:C.Wait](DEBUG): Construct Wait.
2018-01-25T21:18:09.776Z,1516915089.776 [Default:E.Execute](DEBUG): Construct Execute.
2018-01-25T21:18:09.795Z,1516915089.795 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
xmlns:Guidance="Tethys/Guidance"
xmlns:Units="Tethys/Units"
xmlns:Universal="Tethys/Universal"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
Id="Default">

    <DefineArg Name="ElapsedSinceDefaultStarted"><Units:minute/><Value>0</Value></DefineArg>

    <Guidance:Wait>
        <Sequence/>
        <Description>
            Wait a moment to see if the scheduler starts a new mission before
            starting to actually run Default.
        </Description>
        <Setting><Guidance:Wait.duration/><Units:second/><Value>13</Value></Setting>
    </Guidance:Wait>

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="CheckIn">

        <Sequence Repeat="288"/>

        <ReadDatum Id="Read_GPS">
            <Sequence/>
            <Timeout Duration="P5M"/>
            <Universal:time_fix/>
        </ReadDatum>

        <ReadDatum Id="Read_Iridium">
            <Sequence/>
            <Timeout Duration="P2H">
                <Guidance:Execute>
                    <Sequence/>
                    <Setting><Guidance:Execute.command/><String>Burn 300</String></Setting>
                </Guidance:Execute>
                <Syslog Severity="Critical">Dropped weight due to communications timeout.</Syslog>
            </Timeout>
            <Universal:platform_communications/>
        </ReadDatum>

        <Guidance:Wait>
            <Sequence/>
            <Setting><Guidance:Wait.duration/><Units:minute/><Value>5</Value></Setting>
        </Guidance:Wait>

        <Assign><Sequence/><Arg Name="ElapsedSinceDefaultStarted"/><Elapsed><Universal:mission_started/></Elapsed></Assign>

        <Syslog Severity="Important">Default mission has been running for <Arg Name="ElapsedSinceDefaultStarted"/><Units:minute/></Syslog>

    </Aggregate>

    <Syslog Severity="Important">Restarting logs and Default mission.</Syslog>

    <Guidance:Execute>
        <Sequence/>
        <Setting><Guidance:Execute.command/><String>restart logs</String></Setting>
    </Guidance:Execute>

</Mission>


2018-01-25T21:18:09.800Z,1516915089.800 [controlThread](DEBUG): Component order: CycleStarter,Aanderaa_O2,PAR_Licor,DataOverHttps,NAL9602,Onboard,DAT,PNI_TCM,PAR_Licor,DepthRateCalculator,PitchRateCalculator,SpeedCalculator,TempGradientCalculator,VerticalTemperatureHomogeneityIndexCalculator,YawRateCalculator,StratificationFrontDetector,DeadReckonUsingMultipleVelocitySources,DeadReckonUsingSpeedCalculator,DeadReckonWithRespectToSeafloor,NavChart,UniversalFixResidualReporter,MissionManager,VerticalControl,HorizontalControl,SpeedControl,LoopControl,BuoyancyServo,ElevatorServo,MassServo,RudderServo,ThrusterServo,SBIT,IBIT,CBIT,Reporter,LogSplitter,
2018-01-25T21:18:09.847Z,1516915089.847 [DataOverHttps](DEBUG): dashIP=134.89.2.23 starts with a digit so assuming it is a numeric IP
2018-01-25T21:18:09.912Z,1516915089.912 [DAT](INFO): Powering up
2018-01-25T21:18:09.912Z,1516915089.912 [DAT](DEBUG): Initializing DAT.
2018-01-25T21:18:09.959Z,1516915089.959 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:10.069Z,1516915090.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-01-25T21:18:10.069Z,1516915090.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-01-25T21:18:10.072Z,1516915090.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:10.094Z,1516915090.094 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-01-25T21:18:10.099Z,1516915090.099 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-01-25T21:18:10.229Z,1516915090.229 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2018-01-25T21:18:10.237Z,1516915090.237 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2018-01-25T21:18:10.258Z,1516915090.258 [ElevatorServo](DEBUG): Initializing EZServoServo.
2018-01-25T21:18:10.265Z,1516915090.265 [ElevatorServo](DEBUG): Initializing ElevatorServo.
2018-01-25T21:18:10.278Z,1516915090.278 [MassServo](DEBUG): Initializing EZServoServo.
2018-01-25T21:18:10.293Z,1516915090.293 [MassServo](DEBUG): Initializing MassServo.
2018-01-25T21:18:10.306Z,1516915090.306 [RudderServo](DEBUG): Initializing EZServoServo.
2018-01-25T21:18:10.313Z,1516915090.313 [RudderServo](DEBUG): Initializing RudderServo.
2018-01-25T21:18:10.326Z,1516915090.326 [ThrusterServo](DEBUG): Initializing EZServoServo.
2018-01-25T21:18:10.333Z,1516915090.333 [ThrusterServo](DEBUG): Initializing ThrusterServo.
2018-01-25T21:18:10.586Z,1516915090.586 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:10.588Z,1516915090.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-01-25T21:18:10.589Z,1516915090.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-01-25T21:18:10.593Z,1516915090.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:10.593Z,1516915090.593 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-01-25T21:18:10.594Z,1516915090.594 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-01-25T21:18:10.827Z,1516915090.827 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:10.832Z,1516915090.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-01-25T21:18:10.832Z,1516915090.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-01-25T21:18:10.833Z,1516915090.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:10.835Z,1516915090.835 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-01-25T21:18:10.836Z,1516915090.836 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-01-25T21:18:11.177Z,1516915091.177 [BuoyancyServo](ERROR): Buoyancy initialization uart error serial timeout
2018-01-25T21:18:11.177Z,1516915091.177 [BuoyancyServo](FAULT): Buoyancy failed to initialize
2018-01-25T21:18:11.177Z,1516915091.177 [BuoyancyServo] Communications Fault, FailCount= 1
2018-01-25T21:18:11.177Z,1516915091.177 [BuoyancyServo](ERROR): Communications Fault
2018-01-25T21:18:11.384Z,1516915091.384 [CBIT](ERROR): Communications Fault in component: BuoyancyServo
2018-01-25T21:18:11.421Z,1516915091.421 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:11.423Z,1516915091.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-01-25T21:18:11.424Z,1516915091.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-01-25T21:18:11.425Z,1516915091.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:11.433Z,1516915091.433 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-01-25T21:18:11.434Z,1516915091.434 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-01-25T21:18:11.443Z,1516915091.443 [BuoyancyServo](DEBUG): Uninitialize Buoyancy Servo.
2018-01-25T21:18:11.444Z,1516915091.444 [BuoyancyServo](INFO): Powering down
2018-01-25T21:18:11.835Z,1516915091.835 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:11.841Z,1516915091.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-01-25T21:18:11.841Z,1516915091.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-01-25T21:18:11.842Z,1516915091.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:11.849Z,1516915091.849 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-01-25T21:18:11.850Z,1516915091.850 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-01-25T21:18:12.217Z,1516915092.217 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:12.220Z,1516915092.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-01-25T21:18:12.220Z,1516915092.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-01-25T21:18:12.221Z,1516915092.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:12.221Z,1516915092.221 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-01-25T21:18:12.222Z,1516915092.222 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-01-25T21:18:12.617Z,1516915092.617 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:12.619Z,1516915092.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-01-25T21:18:12.620Z,1516915092.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-01-25T21:18:12.621Z,1516915092.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:12.621Z,1516915092.621 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-01-25T21:18:12.622Z,1516915092.622 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-01-25T21:18:13.113Z,1516915093.113 [Aanderaa_O2](INFO): Powering down
2018-01-25T21:18:13.210Z,1516915093.210 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:13.212Z,1516915093.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-01-25T21:18:13.213Z,1516915093.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-01-25T21:18:13.214Z,1516915093.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:13.215Z,1516915093.215 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-01-25T21:18:13.216Z,1516915093.216 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-01-25T21:18:13.441Z,1516915093.441 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:13.444Z,1516915093.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-01-25T21:18:13.453Z,1516915093.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:13.617Z,1516915093.617 [CBIT](INFO): Clearing failed state for component BuoyancyServo
2018-01-25T21:18:13.617Z,1516915093.617 [BuoyancyServo] No Fault, FailCount= 1
2018-01-25T21:18:13.827Z,1516915093.827 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:13.852Z,1516915093.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-01-25T21:18:13.853Z,1516915093.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:13.871Z,1516915093.871 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2018-01-25T21:18:13.877Z,1516915093.877 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2018-01-25T21:18:14.240Z,1516915094.240 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:14.252Z,1516915094.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-01-25T21:18:14.261Z,1516915094.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:14.629Z,1516915094.629 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:14.651Z,1516915094.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:15.025Z,1516915095.025 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:15.038Z,1516915095.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:15.044Z,1516915095.044 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface
2018-01-25T21:18:15.172Z,1516915095.172 [CTD_Seabird](INFO): Started Seabird LCM interface with command:nohup ./lrauv-framework/onboard/bin/gpctd -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyC6 -b 9600 >& /dev/null &
2018-01-25T21:18:15.218Z,1516915095.218 [CTD_Seabird](INFO): LCM subscribed to channel:ctd_t.seabird-gpctd
2018-01-25T21:18:15.458Z,1516915095.458 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:15.464Z,1516915095.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:15.833Z,1516915095.833 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:15.838Z,1516915095.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:16.225Z,1516915096.225 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:16.238Z,1516915096.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:16.636Z,1516915096.636 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:16.650Z,1516915096.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:17.033Z,1516915097.033 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:17.038Z,1516915097.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:17.441Z,1516915097.441 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:17.446Z,1516915097.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:17.870Z,1516915097.870 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:17.886Z,1516915097.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:18.237Z,1516915098.237 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:18.242Z,1516915098.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:18.625Z,1516915098.625 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:18.638Z,1516915098.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:19.033Z,1516915099.033 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:19.046Z,1516915099.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:19.433Z,1516915099.433 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:19.446Z,1516915099.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:19.825Z,1516915099.825 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:19.846Z,1516915099.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:20.233Z,1516915100.233 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:20.246Z,1516915100.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:20.659Z,1516915100.659 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:20.673Z,1516915100.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:21.025Z,1516915101.025 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:21.038Z,1516915101.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:21.427Z,1516915101.427 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:21.440Z,1516915101.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:21.843Z,1516915101.843 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:21.869Z,1516915101.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:22.225Z,1516915102.225 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:22.242Z,1516915102.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:22.633Z,1516915102.633 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:22.646Z,1516915102.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:23.033Z,1516915103.033 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:23.046Z,1516915103.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:23.415Z,1516915103.415 [DAT](INFO): setting local address to 1
2018-01-25T21:18:23.446Z,1516915103.446 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:23.467Z,1516915103.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:23.836Z,1516915103.836 [DAT](INFO): set local address to 1
2018-01-25T21:18:23.850Z,1516915103.850 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:23.863Z,1516915103.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:24.226Z,1516915104.226 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:24.247Z,1516915104.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:24.637Z,1516915104.637 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:24.642Z,1516915104.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:25.077Z,1516915105.077 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:25.090Z,1516915105.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:25.437Z,1516915105.437 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:25.450Z,1516915105.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:25.833Z,1516915105.833 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:25.838Z,1516915105.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:26.250Z,1516915106.250 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:26.263Z,1516915106.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:26.633Z,1516915106.633 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:26.646Z,1516915106.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:27.041Z,1516915107.041 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:27.067Z,1516915107.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:27.437Z,1516915107.437 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:27.450Z,1516915107.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:27.829Z,1516915107.829 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:27.842Z,1516915107.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:28.225Z,1516915108.225 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:28.230Z,1516915108.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:28.633Z,1516915108.633 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:28.646Z,1516915108.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:29.028Z,1516915109.028 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:29.049Z,1516915109.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:29.439Z,1516915109.439 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:29.451Z,1516915109.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:29.833Z,1516915109.833 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:29.846Z,1516915109.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:30.229Z,1516915110.229 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:30.242Z,1516915110.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:30.625Z,1516915110.625 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:30.630Z,1516915110.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:31.033Z,1516915111.033 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:31.046Z,1516915111.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:31.435Z,1516915111.435 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:31.448Z,1516915111.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:31.829Z,1516915111.829 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:31.842Z,1516915111.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:32.229Z,1516915112.229 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:32.242Z,1516915112.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:32.625Z,1516915112.625 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:32.662Z,1516915112.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:33.025Z,1516915113.025 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-25T21:18:33.063Z,1516915113.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:33.453Z,1516915113.453 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010823 psu
2018-01-25T21:18:33.455Z,1516915113.455 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:18:33.466Z,1516915113.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:33.838Z,1516915113.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:34.242Z,1516915114.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:34.638Z,1516915114.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:34.654Z,1516915114.654 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010823 psu
2018-01-25T21:18:34.655Z,1516915114.655 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:18:35.041Z,1516915115.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:35.404Z,1516915115.404 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010815 psu
2018-01-25T21:18:35.406Z,1516915115.406 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:18:35.478Z,1516915115.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:35.843Z,1516915115.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:36.246Z,1516915116.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:36.608Z,1516915116.608 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:18:36.610Z,1516915116.610 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:18:36.674Z,1516915116.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:37.058Z,1516915117.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:37.436Z,1516915117.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:37.810Z,1516915117.810 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:18:37.811Z,1516915117.811 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:18:37.911Z,1516915117.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:38.235Z,1516915118.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:38.404Z,1516915118.404 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:18:38.405Z,1516915118.405 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:18:38.667Z,1516915118.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:38.998Z,1516915118.998 [NAL9602](INFO): Powering up NAL9602
2018-01-25T21:18:39.043Z,1516915119.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:39.471Z,1516915119.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:39.606Z,1516915119.606 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:18:39.607Z,1516915119.607 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:18:39.842Z,1516915119.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:40.239Z,1516915120.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:40.647Z,1516915120.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:40.806Z,1516915120.806 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:18:40.807Z,1516915120.807 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:18:41.038Z,1516915121.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:41.408Z,1516915121.408 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:18:41.410Z,1516915121.410 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:18:41.463Z,1516915121.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:41.826Z,1516915121.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:42.258Z,1516915122.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:42.612Z,1516915122.612 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:18:42.613Z,1516915122.613 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:18:42.659Z,1516915122.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:43.056Z,1516915123.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:43.473Z,1516915123.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:43.815Z,1516915123.815 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:18:43.816Z,1516915123.816 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:18:43.866Z,1516915123.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:44.238Z,1516915124.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:44.413Z,1516915124.413 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:18:44.415Z,1516915124.415 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:18:44.634Z,1516915124.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:45.059Z,1516915125.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:45.438Z,1516915125.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:45.614Z,1516915125.614 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:18:45.615Z,1516915125.615 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:18:45.858Z,1516915125.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:46.246Z,1516915126.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:46.646Z,1516915126.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:46.814Z,1516915126.814 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:18:46.815Z,1516915126.815 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:18:47.046Z,1516915127.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:47.437Z,1516915127.437 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:18:47.438Z,1516915127.438 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:18:47.478Z,1516915127.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:47.846Z,1516915127.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:48.238Z,1516915128.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:48.638Z,1516915128.638 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:18:48.639Z,1516915128.639 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:18:48.653Z,1516915128.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:49.042Z,1516915129.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:49.424Z,1516915129.424 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:18:49.425Z,1516915129.425 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:18:49.461Z,1516915129.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:49.851Z,1516915129.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:50.194Z,1516915130.194 [NAL9602](INFO): NAL9602 initialized
2018-01-25T21:18:50.259Z,1516915130.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:50.626Z,1516915130.626 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:18:50.627Z,1516915130.627 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:18:50.670Z,1516915130.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:51.055Z,1516915131.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:51.503Z,1516915131.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:51.826Z,1516915131.826 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:18:51.827Z,1516915131.827 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:18:51.887Z,1516915131.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:52.289Z,1516915132.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:52.426Z,1516915132.426 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:18:52.427Z,1516915132.427 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:18:52.646Z,1516915132.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:53.042Z,1516915133.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:53.479Z,1516915133.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:53.626Z,1516915133.626 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:18:53.627Z,1516915133.627 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:18:53.887Z,1516915133.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:54.251Z,1516915134.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:54.645Z,1516915134.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:54.826Z,1516915134.826 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:18:54.827Z,1516915134.827 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:18:55.050Z,1516915135.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:55.432Z,1516915135.432 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:18:55.433Z,1516915135.433 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:18:55.455Z,1516915135.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:55.847Z,1516915135.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:56.254Z,1516915136.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:56.634Z,1516915136.634 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:18:56.635Z,1516915136.635 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:18:56.649Z,1516915136.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:57.046Z,1516915137.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:57.458Z,1516915137.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:57.834Z,1516915137.834 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:18:57.835Z,1516915137.835 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:18:57.846Z,1516915137.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:58.254Z,1516915138.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:58.435Z,1516915138.435 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:18:58.436Z,1516915138.436 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:18:58.662Z,1516915138.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:59.062Z,1516915139.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:59.470Z,1516915139.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:18:59.635Z,1516915139.635 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:18:59.636Z,1516915139.636 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:18:59.863Z,1516915139.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:00.251Z,1516915140.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:00.654Z,1516915140.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:00.838Z,1516915140.838 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:00.839Z,1516915140.839 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:01.052Z,1516915141.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:01.446Z,1516915141.446 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:01.447Z,1516915141.447 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:01.459Z,1516915141.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:01.852Z,1516915141.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:02.266Z,1516915142.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:02.646Z,1516915142.646 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:02.647Z,1516915142.647 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:02.662Z,1516915142.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:03.058Z,1516915143.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:03.470Z,1516915143.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:03.836Z,1516915143.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:03.846Z,1516915143.846 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:03.847Z,1516915143.847 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:04.239Z,1516915144.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:04.444Z,1516915144.444 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:04.445Z,1516915144.445 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:04.640Z,1516915144.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:05.040Z,1516915145.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:05.456Z,1516915145.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:05.646Z,1516915145.646 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:05.647Z,1516915145.647 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:05.854Z,1516915145.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:06.242Z,1516915146.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:06.638Z,1516915146.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:06.846Z,1516915146.846 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:06.847Z,1516915146.847 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:07.038Z,1516915147.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:07.449Z,1516915147.449 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:07.450Z,1516915147.450 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:07.478Z,1516915147.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:07.833Z,1516915147.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:08.234Z,1516915148.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:08.646Z,1516915148.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:08.650Z,1516915148.650 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:08.651Z,1516915148.651 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:09.050Z,1516915149.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:09.471Z,1516915149.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:09.846Z,1516915149.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:09.850Z,1516915149.850 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:09.851Z,1516915149.851 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:10.240Z,1516915150.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:10.453Z,1516915150.453 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:10.455Z,1516915150.455 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:10.650Z,1516915150.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:11.042Z,1516915151.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:11.469Z,1516915151.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:11.654Z,1516915151.654 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:11.655Z,1516915151.655 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:11.843Z,1516915151.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:12.239Z,1516915152.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:12.644Z,1516915152.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:12.854Z,1516915152.854 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:12.855Z,1516915152.855 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:13.051Z,1516915153.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:13.458Z,1516915153.458 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:13.459Z,1516915153.459 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:13.461Z,1516915153.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:13.857Z,1516915153.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:14.255Z,1516915154.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:14.651Z,1516915154.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:14.658Z,1516915154.658 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:14.659Z,1516915154.659 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:15.046Z,1516915155.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:15.425Z,1516915155.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:15.830Z,1516915155.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:15.858Z,1516915155.858 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:15.859Z,1516915155.859 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:16.230Z,1516915156.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:16.462Z,1516915156.462 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:16.464Z,1516915156.464 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:16.634Z,1516915156.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:17.029Z,1516915157.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:17.467Z,1516915157.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:17.662Z,1516915157.662 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:17.663Z,1516915157.663 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:17.842Z,1516915157.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:18.232Z,1516915158.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:18.639Z,1516915158.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:18.862Z,1516915158.862 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010815 psu
2018-01-25T21:19:18.863Z,1516915158.863 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:19.046Z,1516915159.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:19.468Z,1516915159.468 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:19.470Z,1516915159.470 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:19.480Z,1516915159.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:19.847Z,1516915159.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:20.241Z,1516915160.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:20.631Z,1516915160.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:20.670Z,1516915160.670 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:20.671Z,1516915160.671 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:21.034Z,1516915161.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:21.043Z,1516915161.043 [SBIT](IMPORTANT): Beginning Startup BIT
2018-01-25T21:19:21.047Z,1516915161.047 [CBIT](IMPORTANT): Beginning ground fault scan
2018-01-25T21:19:21.444Z,1516915161.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:21.840Z,1516915161.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:21.870Z,1516915161.870 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:21.871Z,1516915161.871 [CTD_Seabird](INFO): Ground Fault scan is active; will mark data as invalid.
2018-01-25T21:19:21.872Z,1516915161.872 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:22.237Z,1516915162.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:22.473Z,1516915162.473 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:22.474Z,1516915162.474 [CTD_Seabird](INFO): Ground Fault scan is active; will mark data as invalid.
2018-01-25T21:19:22.475Z,1516915162.475 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:22.645Z,1516915162.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:23.033Z,1516915163.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:23.548Z,1516915163.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:23.674Z,1516915163.674 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:23.675Z,1516915163.675 [CTD_Seabird](INFO): Ground Fault scan is active; will mark data as invalid.
2018-01-25T21:19:23.676Z,1516915163.676 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:23.951Z,1516915163.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:24.351Z,1516915164.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:24.750Z,1516915164.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:24.874Z,1516915164.874 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:24.875Z,1516915164.875 [CTD_Seabird](INFO): Ground Fault scan is active; will mark data as invalid.
2018-01-25T21:19:24.876Z,1516915164.876 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:25.146Z,1516915165.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:25.477Z,1516915165.477 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:25.477Z,1516915165.477 [CTD_Seabird](INFO): Ground Fault scan is active; will mark data as invalid.
2018-01-25T21:19:25.478Z,1516915165.478 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:25.567Z,1516915165.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:25.943Z,1516915165.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:26.350Z,1516915166.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:26.678Z,1516915166.678 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:26.679Z,1516915166.679 [CTD_Seabird](INFO): Ground Fault scan is active; will mark data as invalid.
2018-01-25T21:19:26.680Z,1516915166.680 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:26.754Z,1516915166.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:27.134Z,1516915167.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:27.538Z,1516915167.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:27.878Z,1516915167.878 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:27.879Z,1516915167.879 [CTD_Seabird](INFO): Ground Fault scan is active; will mark data as invalid.
2018-01-25T21:19:27.880Z,1516915167.880 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:27.943Z,1516915167.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:28.342Z,1516915168.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:28.481Z,1516915168.481 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:28.482Z,1516915168.482 [CTD_Seabird](INFO): Ground Fault scan is active; will mark data as invalid.
2018-01-25T21:19:28.483Z,1516915168.483 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:28.742Z,1516915168.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:29.150Z,1516915169.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:29.544Z,1516915169.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:29.682Z,1516915169.682 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:29.683Z,1516915169.683 [CTD_Seabird](INFO): Ground Fault scan is active; will mark data as invalid.
2018-01-25T21:19:29.684Z,1516915169.684 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:29.943Z,1516915169.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:30.353Z,1516915170.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:30.746Z,1516915170.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:30.882Z,1516915170.882 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:30.883Z,1516915170.883 [CTD_Seabird](INFO): Ground Fault scan is active; will mark data as invalid.
2018-01-25T21:19:30.884Z,1516915170.884 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:31.138Z,1516915171.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:31.486Z,1516915171.486 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:31.486Z,1516915171.486 [CTD_Seabird](INFO): Ground Fault scan is active; will mark data as invalid.
2018-01-25T21:19:31.488Z,1516915171.488 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:31.566Z,1516915171.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:31.944Z,1516915171.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:31.960Z,1516915171.960 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): -0.004394
CHAN A1 (24V): -0.008285
CHAN A2 (12V): 0.000004
CHAN A3 (5V): -0.001993
CHAN B0 (3.3V): 0.000428
CHAN B1 (3.15aV): -0.000454
CHAN B2 (3.15bV): -0.000148
CHAN B3 (GND): -0.000203
OPEN: 0.005458
Full Scale Calc: 4.765 mA, -1.589 mA
2018-01-25T21:19:32.338Z,1516915172.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:32.686Z,1516915172.686 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:32.688Z,1516915172.688 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:32.754Z,1516915172.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:33.148Z,1516915173.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:33.535Z,1516915173.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:33.886Z,1516915173.886 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:33.887Z,1516915173.887 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:33.958Z,1516915173.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:34.350Z,1516915174.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:34.490Z,1516915174.490 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:34.492Z,1516915174.492 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:34.745Z,1516915174.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:35.149Z,1516915175.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:35.555Z,1516915175.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:35.690Z,1516915175.690 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:35.691Z,1516915175.691 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:35.936Z,1516915175.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:36.346Z,1516915176.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:36.890Z,1516915176.890 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:36.892Z,1516915176.892 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:36.985Z,1516915176.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:37.358Z,1516915177.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:37.495Z,1516915177.495 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:37.496Z,1516915177.496 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:37.752Z,1516915177.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:38.156Z,1516915178.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:38.556Z,1516915178.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:38.694Z,1516915178.694 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:38.695Z,1516915178.695 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:38.963Z,1516915178.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:39.385Z,1516915179.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:39.763Z,1516915179.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:39.894Z,1516915179.894 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:39.895Z,1516915179.895 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:40.167Z,1516915180.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:40.499Z,1516915180.499 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:40.501Z,1516915180.501 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:40.580Z,1516915180.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:40.960Z,1516915180.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:41.378Z,1516915181.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:41.703Z,1516915181.703 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:41.704Z,1516915181.704 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:41.818Z,1516915181.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:42.172Z,1516915182.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:42.503Z,1516915182.503 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:42.504Z,1516915182.504 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:42.645Z,1516915182.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:42.984Z,1516915182.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:43.374Z,1516915183.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:43.702Z,1516915183.702 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:43.704Z,1516915183.704 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:43.790Z,1516915183.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:44.164Z,1516915184.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:44.580Z,1516915184.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:44.902Z,1516915184.902 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:44.904Z,1516915184.904 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:45.001Z,1516915185.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:45.377Z,1516915185.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:45.507Z,1516915185.507 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:45.509Z,1516915185.509 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:45.797Z,1516915185.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:46.151Z,1516915186.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:46.561Z,1516915186.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:46.710Z,1516915186.710 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:46.711Z,1516915186.711 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:46.966Z,1516915186.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:47.363Z,1516915187.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:47.771Z,1516915187.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:47.910Z,1516915187.910 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:47.912Z,1516915187.912 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:48.163Z,1516915188.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:48.538Z,1516915188.538 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:48.539Z,1516915188.539 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:48.592Z,1516915188.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:48.980Z,1516915188.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:49.391Z,1516915189.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:49.738Z,1516915189.738 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:49.740Z,1516915189.740 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:49.806Z,1516915189.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:50.199Z,1516915190.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:50.521Z,1516915190.521 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:50.523Z,1516915190.523 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:50.606Z,1516915190.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:50.996Z,1516915190.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:51.372Z,1516915191.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:51.723Z,1516915191.723 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:51.725Z,1516915191.725 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:51.798Z,1516915191.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:52.179Z,1516915192.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:52.583Z,1516915192.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:52.926Z,1516915192.926 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:52.927Z,1516915192.927 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:52.971Z,1516915192.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:53.355Z,1516915193.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:53.520Z,1516915193.520 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:53.521Z,1516915193.521 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:53.762Z,1516915193.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:54.152Z,1516915194.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:54.566Z,1516915194.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:54.722Z,1516915194.722 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:54.723Z,1516915194.723 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:54.974Z,1516915194.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:55.361Z,1516915195.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:55.770Z,1516915195.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:55.922Z,1516915195.922 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:55.923Z,1516915195.923 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:56.174Z,1516915196.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:56.524Z,1516915196.524 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:56.526Z,1516915196.526 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:56.580Z,1516915196.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:56.961Z,1516915196.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:57.360Z,1516915197.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:57.728Z,1516915197.728 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:57.730Z,1516915197.730 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:57.776Z,1516915197.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:58.164Z,1516915198.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:58.562Z,1516915198.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:58.931Z,1516915198.931 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:58.932Z,1516915198.932 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:58.974Z,1516915198.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:59.350Z,1516915199.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:19:59.529Z,1516915199.529 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:19:59.530Z,1516915199.530 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:19:59.754Z,1516915199.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:00.159Z,1516915200.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:00.584Z,1516915200.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:00.730Z,1516915200.730 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:00.731Z,1516915200.731 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:00.982Z,1516915200.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:01.359Z,1516915201.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:01.759Z,1516915201.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:01.930Z,1516915201.930 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:01.931Z,1516915201.931 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:02.158Z,1516915202.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:02.534Z,1516915202.534 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:02.536Z,1516915202.536 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:02.566Z,1516915202.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:02.961Z,1516915202.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:03.355Z,1516915203.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:03.734Z,1516915203.734 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:03.735Z,1516915203.735 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:03.907Z,1516915203.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:04.296Z,1516915204.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:04.699Z,1516915204.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:04.934Z,1516915204.934 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:04.935Z,1516915204.935 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:05.113Z,1516915205.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:05.517Z,1516915205.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:05.538Z,1516915205.538 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:05.540Z,1516915205.540 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:05.910Z,1516915205.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:06.311Z,1516915206.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:06.693Z,1516915206.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:06.738Z,1516915206.738 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:06.740Z,1516915206.740 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:07.098Z,1516915207.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:07.498Z,1516915207.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:07.898Z,1516915207.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:07.938Z,1516915207.938 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:07.939Z,1516915207.939 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:07.941Z,1516915207.941 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:08.345Z,1516915208.345 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:08.351Z,1516915208.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:08.543Z,1516915208.543 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:08.545Z,1516915208.545 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:08.689Z,1516915208.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:08.949Z,1516915208.949 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:09.098Z,1516915209.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:09.488Z,1516915209.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:09.745Z,1516915209.745 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:09.746Z,1516915209.746 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:09.748Z,1516915209.748 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:09.890Z,1516915209.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:10.149Z,1516915210.149 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:10.310Z,1516915210.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:10.726Z,1516915210.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:10.945Z,1516915210.945 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:10.946Z,1516915210.946 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:10.947Z,1516915210.947 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:11.349Z,1516915211.349 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:11.548Z,1516915211.548 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:11.549Z,1516915211.549 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:11.953Z,1516915211.953 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:12.749Z,1516915212.749 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:12.750Z,1516915212.750 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:12.752Z,1516915212.752 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:13.153Z,1516915213.153 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:13.949Z,1516915213.949 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:13.950Z,1516915213.950 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:13.952Z,1516915213.952 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:14.353Z,1516915214.353 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:14.561Z,1516915214.561 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:14.562Z,1516915214.562 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:14.569Z,1516915214.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:14.719Z,1516915214.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:14.736Z,1516915214.736 [SBIT](IMPORTANT): SBIT PASSED
2018-01-25T21:20:14.965Z,1516915214.965 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:15.043Z,1516915215.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:15.046Z,1516915215.046 [MissionManager](IMPORTANT): Started mission Startup
2018-01-25T21:20:15.047Z,1516915215.047 [Startup] Running Loop=1
2018-01-25T21:20:15.047Z,1516915215.047 [Startup](DEBUG): Aggregate::initialize Startup
2018-01-25T21:20:15.047Z,1516915215.047 [Startup:A.GoToSurface] Running Loop=1
2018-01-25T21:20:15.047Z,1516915215.047 [Startup:A.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2018-01-25T21:20:15.048Z,1516915215.048 [Startup:A.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2018-01-25T21:20:15.048Z,1516915215.048 [Startup:A.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2018-01-25T21:20:15.049Z,1516915215.049 [Startup:A.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2018-01-25T21:20:15.049Z,1516915215.049 [Startup:A.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds.
2018-01-25T21:20:15.050Z,1516915215.050 [Startup:A.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2018-01-25T21:20:15.055Z,1516915215.055 [Startup:StartupSatComms] Running Loop=1
2018-01-25T21:20:15.055Z,1516915215.055 [Startup:StartupSatComms](DEBUG): Aggregate::initialize Startup:StartupSatComms
2018-01-25T21:20:15.055Z,1516915215.055 [Startup:StartupSatComms:A] Running Loop=1
2018-01-25T21:20:15.398Z,1516915215.398 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.003389
2018-01-25T21:20:15.478Z,1516915215.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:15.486Z,1516915215.486 [Startup:StartupSatComms:A](DEBUG): Initialize ReadDataComponent to sense latitude_fix
2018-01-25T21:20:15.761Z,1516915215.761 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:15.762Z,1516915215.762 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:15.764Z,1516915215.764 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:15.847Z,1516915215.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:16.165Z,1516915216.165 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:16.256Z,1516915216.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:16.555Z,1516915216.555 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:16.556Z,1516915216.556 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:16.645Z,1516915216.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:16.961Z,1516915216.961 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:17.038Z,1516915217.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:17.432Z,1516915217.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:17.757Z,1516915217.757 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:17.758Z,1516915217.758 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:17.760Z,1516915217.760 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:17.857Z,1516915217.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:18.161Z,1516915218.161 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:18.253Z,1516915218.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:18.634Z,1516915218.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:18.957Z,1516915218.957 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:18.958Z,1516915218.958 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:18.960Z,1516915218.960 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:19.032Z,1516915219.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:19.361Z,1516915219.361 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:19.428Z,1516915219.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:19.560Z,1516915219.560 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:19.561Z,1516915219.561 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:19.846Z,1516915219.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:19.965Z,1516915219.965 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:20.237Z,1516915220.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:20.639Z,1516915220.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:20.763Z,1516915220.763 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:20.764Z,1516915220.764 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:20.765Z,1516915220.765 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:21.050Z,1516915221.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:21.169Z,1516915221.169 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:21.451Z,1516915221.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:21.854Z,1516915221.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:21.965Z,1516915221.965 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:21.966Z,1516915221.966 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:21.968Z,1516915221.968 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:22.229Z,1516915222.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:22.369Z,1516915222.369 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:22.566Z,1516915222.566 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:22.568Z,1516915222.568 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:22.658Z,1516915222.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:22.969Z,1516915222.969 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:23.044Z,1516915223.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:23.428Z,1516915223.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:23.768Z,1516915223.768 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:23.769Z,1516915223.769 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:23.770Z,1516915223.770 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:23.865Z,1516915223.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:24.173Z,1516915224.173 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:24.238Z,1516915224.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:24.620Z,1516915224.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:24.969Z,1516915224.969 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:24.970Z,1516915224.970 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:24.971Z,1516915224.971 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:25.045Z,1516915225.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:25.373Z,1516915225.373 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:25.426Z,1516915225.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:25.569Z,1516915225.569 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:25.570Z,1516915225.570 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:25.835Z,1516915225.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:25.973Z,1516915225.973 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:26.258Z,1516915226.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:26.636Z,1516915226.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:26.769Z,1516915226.769 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:26.770Z,1516915226.770 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:26.772Z,1516915226.772 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:27.035Z,1516915227.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:27.173Z,1516915227.173 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:27.429Z,1516915227.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:27.832Z,1516915227.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:27.969Z,1516915227.969 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:27.970Z,1516915227.970 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:27.972Z,1516915227.972 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:28.235Z,1516915228.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:28.373Z,1516915228.373 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:28.574Z,1516915228.574 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:28.575Z,1516915228.575 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:28.650Z,1516915228.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:28.977Z,1516915228.977 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:29.038Z,1516915229.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:29.430Z,1516915229.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:29.773Z,1516915229.773 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:29.774Z,1516915229.774 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:29.776Z,1516915229.776 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:29.847Z,1516915229.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:30.177Z,1516915230.177 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:30.237Z,1516915230.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:30.638Z,1516915230.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:30.973Z,1516915230.973 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:30.974Z,1516915230.974 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:30.975Z,1516915230.975 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:31.066Z,1516915231.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:31.377Z,1516915231.377 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:31.444Z,1516915231.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:31.578Z,1516915231.578 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:31.580Z,1516915231.580 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:31.858Z,1516915231.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:31.982Z,1516915231.982 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:32.232Z,1516915232.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:32.625Z,1516915232.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:32.777Z,1516915232.777 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:32.778Z,1516915232.778 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:32.780Z,1516915232.780 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:33.038Z,1516915233.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:33.182Z,1516915233.182 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:33.427Z,1516915233.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:33.828Z,1516915233.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:33.977Z,1516915233.977 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:33.978Z,1516915233.978 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:33.980Z,1516915233.980 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:34.235Z,1516915234.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:34.382Z,1516915234.382 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:34.583Z,1516915234.583 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:34.584Z,1516915234.584 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:34.654Z,1516915234.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:34.985Z,1516915234.985 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:35.034Z,1516915235.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:35.441Z,1516915235.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:35.781Z,1516915235.781 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:35.782Z,1516915235.782 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:35.783Z,1516915235.783 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:35.838Z,1516915235.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:36.185Z,1516915236.185 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:36.249Z,1516915236.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:36.642Z,1516915236.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:36.981Z,1516915236.981 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:36.982Z,1516915236.982 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:36.983Z,1516915236.983 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:37.087Z,1516915237.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:37.385Z,1516915237.385 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:37.446Z,1516915237.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:37.588Z,1516915237.588 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:37.589Z,1516915237.589 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:37.850Z,1516915237.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:37.993Z,1516915237.993 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:38.226Z,1516915238.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:38.627Z,1516915238.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:38.789Z,1516915238.789 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:38.790Z,1516915238.790 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:38.792Z,1516915238.792 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:39.030Z,1516915239.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:39.193Z,1516915239.193 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:39.430Z,1516915239.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:39.824Z,1516915239.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:39.990Z,1516915239.990 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:39.991Z,1516915239.991 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:40.230Z,1516915240.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:40.596Z,1516915240.596 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:40.597Z,1516915240.597 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:40.670Z,1516915240.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:41.001Z,1516915241.001 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:41.041Z,1516915241.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:41.436Z,1516915241.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:41.797Z,1516915241.797 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:41.798Z,1516915241.798 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:41.800Z,1516915241.800 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:41.843Z,1516915241.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:42.201Z,1516915242.201 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:42.251Z,1516915242.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:42.645Z,1516915242.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:42.997Z,1516915242.997 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:42.998Z,1516915242.998 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:42.000Z,1516915243.000 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:43.055Z,1516915243.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:43.401Z,1516915243.401 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:43.442Z,1516915243.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:43.597Z,1516915243.597 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:43.598Z,1516915243.598 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:43.850Z,1516915243.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:44.001Z,1516915244.001 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:44.226Z,1516915244.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:44.646Z,1516915244.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:44.797Z,1516915244.797 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:44.798Z,1516915244.798 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:44.800Z,1516915244.800 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:45.050Z,1516915245.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:45.201Z,1516915245.201 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:45.426Z,1516915245.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:45.821Z,1516915245.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:45.998Z,1516915245.998 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:45.999Z,1516915245.999 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:46.000Z,1516915246.000 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:46.230Z,1516915246.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:46.401Z,1516915246.401 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:46.602Z,1516915246.602 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:46.603Z,1516915246.603 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:46.697Z,1516915246.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:47.006Z,1516915247.006 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:47.035Z,1516915247.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:47.435Z,1516915247.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:47.803Z,1516915247.803 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:47.807Z,1516915247.807 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:47.808Z,1516915247.808 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:47.838Z,1516915247.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:48.209Z,1516915248.209 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:48.233Z,1516915248.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:48.639Z,1516915248.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:49.005Z,1516915249.005 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:49.006Z,1516915249.006 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:49.007Z,1516915249.007 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:49.058Z,1516915249.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:49.409Z,1516915249.409 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:49.444Z,1516915249.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:49.606Z,1516915249.606 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:49.608Z,1516915249.608 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:49.842Z,1516915249.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:50.009Z,1516915250.009 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:50.248Z,1516915250.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:50.644Z,1516915250.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:50.805Z,1516915250.805 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:50.806Z,1516915250.806 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:50.808Z,1516915250.808 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:51.043Z,1516915251.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:51.209Z,1516915251.209 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:51.448Z,1516915251.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:51.852Z,1516915251.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:52.005Z,1516915252.005 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:52.006Z,1516915252.006 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:52.008Z,1516915252.008 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:52.243Z,1516915252.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:52.409Z,1516915252.409 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:52.611Z,1516915252.611 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:52.612Z,1516915252.612 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:52.677Z,1516915252.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:53.013Z,1516915253.013 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:53.048Z,1516915253.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:53.430Z,1516915253.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:53.809Z,1516915253.809 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:53.810Z,1516915253.810 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:53.812Z,1516915253.812 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:53.832Z,1516915253.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:54.214Z,1516915254.214 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:20:54.237Z,1516915254.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:54.650Z,1516915254.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:55.010Z,1516915255.010 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:55.011Z,1516915255.011 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:55.056Z,1516915255.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:55.436Z,1516915255.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:55.617Z,1516915255.617 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:55.619Z,1516915255.619 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:55.832Z,1516915255.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:56.230Z,1516915256.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:56.647Z,1516915256.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:56.818Z,1516915256.818 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:56.819Z,1516915256.819 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:57.050Z,1516915257.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:57.442Z,1516915257.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:57.841Z,1516915257.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:58.018Z,1516915258.018 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:58.019Z,1516915258.019 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:58.244Z,1516915258.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:58.632Z,1516915258.632 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:58.633Z,1516915258.633 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:58.648Z,1516915258.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:59.036Z,1516915259.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:59.435Z,1516915259.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:20:59.834Z,1516915259.834 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:20:59.835Z,1516915259.835 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:20:59.858Z,1516915259.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:00.220Z,1516915260.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:00.624Z,1516915260.624 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:00.625Z,1516915260.625 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:00.660Z,1516915260.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:01.027Z,1516915261.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:01.452Z,1516915261.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:01.826Z,1516915261.826 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:01.827Z,1516915261.827 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:01.847Z,1516915261.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:02.257Z,1516915262.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:02.653Z,1516915262.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:03.029Z,1516915263.029 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:03.031Z,1516915263.031 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:03.066Z,1516915263.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:03.438Z,1516915263.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:03.628Z,1516915263.628 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:03.629Z,1516915263.629 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:03.834Z,1516915263.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:04.224Z,1516915264.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:04.657Z,1516915264.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:04.830Z,1516915264.830 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:04.831Z,1516915264.831 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:05.034Z,1516915265.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:05.436Z,1516915265.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:05.834Z,1516915265.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:06.030Z,1516915266.030 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:06.031Z,1516915266.031 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:06.238Z,1516915266.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:06.632Z,1516915266.632 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:06.634Z,1516915266.634 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:06.650Z,1516915266.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:07.039Z,1516915267.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:07.443Z,1516915267.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:07.834Z,1516915267.834 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:07.835Z,1516915267.835 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:07.849Z,1516915267.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:08.244Z,1516915268.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:08.662Z,1516915268.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:09.034Z,1516915269.034 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:09.035Z,1516915269.035 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:09.046Z,1516915269.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:09.426Z,1516915269.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:09.637Z,1516915269.637 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:09.639Z,1516915269.639 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:09.821Z,1516915269.821 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:09.821Z,1516915269.821 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2018-01-25T21:21:09.822Z,1516915269.822 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-25T21:21:09.823Z,1516915269.823 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:09.823Z,1516915269.823 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2018-01-25T21:21:09.823Z,1516915269.823 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-25T21:21:09.825Z,1516915269.825 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:09.825Z,1516915269.825 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-01-25T21:21:09.825Z,1516915269.825 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-25T21:21:09.858Z,1516915269.858 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-25T21:21:09.858Z,1516915269.858 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-25T21:21:09.858Z,1516915269.858 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-25T21:21:10.276Z,1516915270.276 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-25T21:21:10.280Z,1516915270.280 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2018-01-25T21:21:10.281Z,1516915270.281 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-25T21:21:10.281Z,1516915270.281 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2018-01-25T21:21:10.282Z,1516915270.282 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-25T21:21:10.282Z,1516915270.282 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-01-25T21:21:10.660Z,1516915270.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-25T21:21:10.661Z,1516915270.661 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T21:21:10.661Z,1516915270.661 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T21:21:10.661Z,1516915270.661 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-25T21:21:10.662Z,1516915270.662 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T21:21:10.662Z,1516915270.662 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T21:21:10.662Z,1516915270.662 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-25T21:21:10.663Z,1516915270.663 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T21:21:10.663Z,1516915270.663 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T21:21:10.838Z,1516915270.838 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010815 psu
2018-01-25T21:21:10.839Z,1516915270.839 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:11.033Z,1516915271.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-25T21:21:11.034Z,1516915271.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:12.038Z,1516915272.038 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:12.039Z,1516915272.039 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:12.644Z,1516915272.644 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:12.645Z,1516915272.645 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:13.846Z,1516915273.846 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:13.847Z,1516915273.847 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:14.331Z,1516915274.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-01-25T21:21:14.332Z,1516915274.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:14.470Z,1516915274.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.6 s old, using for 20.0 s.
2018-01-25T21:21:14.470Z,1516915274.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:14.834Z,1516915274.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.0 s old, using for 20.0 s.
2018-01-25T21:21:14.835Z,1516915274.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:15.047Z,1516915275.047 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:15.049Z,1516915275.049 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:15.241Z,1516915275.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.4 s old, using for 20.0 s.
2018-01-25T21:21:15.242Z,1516915275.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:15.269Z,1516915275.269 [Startup:StartupSatComms:A](INFO): Timed out from 2018-01-25T21:20:15.1Z
2018-01-25T21:21:15.269Z,1516915275.269 [Startup:StartupSatComms:A] Stopped
2018-01-25T21:21:15.269Z,1516915275.269 [Startup:StartupSatComms:B] Running Loop=1
2018-01-25T21:21:15.646Z,1516915275.646 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:15.648Z,1516915275.648 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:15.656Z,1516915275.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s.
2018-01-25T21:21:15.657Z,1516915275.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:15.660Z,1516915275.660 [Startup:StartupSatComms:B](DEBUG): Initialize ReadDataComponent to sense platform_communications
2018-01-25T21:21:16.186Z,1516915276.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-25T21:21:16.187Z,1516915276.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:16.431Z,1516915276.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2018-01-25T21:21:16.432Z,1516915276.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:16.846Z,1516915276.846 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:16.847Z,1516915276.847 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:18.046Z,1516915278.046 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010822 psu
2018-01-25T21:21:18.047Z,1516915278.047 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:18.651Z,1516915278.651 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:18.653Z,1516915278.653 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:19.773Z,1516915279.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-25T21:21:19.774Z,1516915279.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:19.854Z,1516915279.854 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:19.855Z,1516915279.855 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:19.856Z,1516915279.856 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180125T210845/Courier0004.lzma
2018-01-25T21:21:19.922Z,1516915279.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-01-25T21:21:19.923Z,1516915279.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:20.246Z,1516915280.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-25T21:21:20.247Z,1516915280.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:20.595Z,1516915280.595 [DataOverHttps](INFO): Moved sent file to Logs/20180125T210845/Courier0004.lzma.bak
2018-01-25T21:21:20.595Z,1516915280.595 [DataOverHttps](INFO): SBD MOMSN=7761184
2018-01-25T21:21:20.681Z,1516915280.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-01-25T21:21:20.682Z,1516915280.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:21.054Z,1516915281.054 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:21.055Z,1516915281.055 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:21.204Z,1516915281.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.4 s old, using for 20.0 s.
2018-01-25T21:21:21.205Z,1516915281.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:21.445Z,1516915281.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-25T21:21:21.446Z,1516915281.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:21.655Z,1516915281.655 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:21.657Z,1516915281.657 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:22.858Z,1516915282.858 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:22.859Z,1516915282.859 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:24.058Z,1516915284.058 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:24.059Z,1516915284.059 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:24.660Z,1516915284.660 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:24.662Z,1516915284.662 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:24.740Z,1516915284.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-01-25T21:21:24.741Z,1516915284.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:24.863Z,1516915284.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s.
2018-01-25T21:21:24.864Z,1516915284.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:25.234Z,1516915285.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2018-01-25T21:21:25.235Z,1516915285.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:25.668Z,1516915285.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2018-01-25T21:21:25.673Z,1516915285.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:25.862Z,1516915285.862 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:25.863Z,1516915285.863 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:26.014Z,1516915286.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2018-01-25T21:21:26.015Z,1516915286.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:26.411Z,1516915286.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2018-01-25T21:21:26.412Z,1516915286.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:27.062Z,1516915287.062 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:27.063Z,1516915287.063 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:27.665Z,1516915287.665 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:27.666Z,1516915287.666 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:28.866Z,1516915288.866 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:28.867Z,1516915288.867 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:29.690Z,1516915289.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2018-01-25T21:21:29.691Z,1516915289.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:29.761Z,1516915289.761 [DataOverHttps](INFO): Sending 142 bytes from file Logs/20180125T211210/Courier0000.lzma
2018-01-25T21:21:29.835Z,1516915289.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:30.066Z,1516915290.066 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:30.068Z,1516915290.068 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:30.171Z,1516915290.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:30.515Z,1516915290.515 [DataOverHttps](INFO): Moved sent file to Logs/20180125T211210/Courier0000.lzma.bak
2018-01-25T21:21:30.516Z,1516915290.516 [DataOverHttps](INFO): SBD MOMSN=7761186
2018-01-25T21:21:30.590Z,1516915290.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:30.670Z,1516915290.670 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:30.671Z,1516915290.671 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:31.106Z,1516915291.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:31.374Z,1516915291.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:31.870Z,1516915291.870 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:31.871Z,1516915291.871 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:33.070Z,1516915293.070 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:33.071Z,1516915293.071 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:33.674Z,1516915293.674 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:33.676Z,1516915293.676 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:34.631Z,1516915294.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:34.775Z,1516915294.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:34.875Z,1516915294.875 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:34.876Z,1516915294.876 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:35.175Z,1516915295.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:35.588Z,1516915295.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:35.976Z,1516915295.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:36.074Z,1516915296.074 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:36.075Z,1516915296.075 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:36.372Z,1516915296.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:36.679Z,1516915296.679 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:36.680Z,1516915296.680 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:37.878Z,1516915297.878 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:37.879Z,1516915297.879 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:39.078Z,1516915299.078 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:39.079Z,1516915299.079 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:39.642Z,1516915299.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:39.684Z,1516915299.684 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:39.685Z,1516915299.685 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:39.737Z,1516915299.737 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180125T211210/Courier0004.lzma
2018-01-25T21:21:39.802Z,1516915299.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:40.178Z,1516915300.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:40.518Z,1516915300.518 [DataOverHttps](INFO): Moved sent file to Logs/20180125T211210/Courier0004.lzma.bak
2018-01-25T21:21:40.518Z,1516915300.518 [DataOverHttps](INFO): SBD MOMSN=7761190
2018-01-25T21:21:40.594Z,1516915300.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:40.886Z,1516915300.886 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:40.887Z,1516915300.887 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:41.388Z,1516915301.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:41.524Z,1516915301.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:42.086Z,1516915302.086 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:42.087Z,1516915302.087 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:42.688Z,1516915302.688 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:42.689Z,1516915302.689 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:43.890Z,1516915303.890 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:43.891Z,1516915303.891 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:44.759Z,1516915304.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:44.886Z,1516915304.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:45.090Z,1516915305.090 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:45.091Z,1516915305.091 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:45.274Z,1516915305.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:45.656Z,1516915305.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:45.693Z,1516915305.693 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:45.694Z,1516915305.694 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:46.058Z,1516915306.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:46.451Z,1516915306.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:46.894Z,1516915306.894 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:46.895Z,1516915306.895 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:48.094Z,1516915308.094 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:48.095Z,1516915308.095 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:48.698Z,1516915308.698 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:48.699Z,1516915308.699 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:49.819Z,1516915309.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:49.898Z,1516915309.898 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:49.899Z,1516915309.899 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:49.901Z,1516915309.901 [DataOverHttps](INFO): Sending 246 bytes from file Logs/20180124T043841/Express0005.lzma
2018-01-25T21:21:49.994Z,1516915309.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:50.291Z,1516915310.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:50.650Z,1516915310.650 [DataOverHttps](INFO): Moved sent file to Logs/20180124T043841/Express0005.lzma.bak
2018-01-25T21:21:50.651Z,1516915310.651 [DataOverHttps](INFO): SBD MOMSN=7761192
2018-01-25T21:21:50.731Z,1516915310.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:51.100Z,1516915311.100 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:51.101Z,1516915311.101 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:51.435Z,1516915311.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:51.619Z,1516915311.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:51.704Z,1516915311.704 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:51.705Z,1516915311.705 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:52.906Z,1516915312.906 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:52.907Z,1516915312.907 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:54.106Z,1516915314.106 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:54.107Z,1516915314.107 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:54.720Z,1516915314.720 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:54.721Z,1516915314.721 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:54.978Z,1516915314.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:55.118Z,1516915315.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:55.466Z,1516915315.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:55.867Z,1516915315.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:55.922Z,1516915315.922 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:55.923Z,1516915315.923 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:56.236Z,1516915316.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:56.638Z,1516915316.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:21:56.710Z,1516915316.710 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:56.711Z,1516915316.711 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:57.910Z,1516915317.910 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:57.911Z,1516915317.911 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:59.110Z,1516915319.110 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:59.111Z,1516915319.111 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:21:59.714Z,1516915319.714 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:21:59.716Z,1516915319.716 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:00.083Z,1516915320.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:00.151Z,1516915320.151 [DataOverHttps](INFO): Sending 681 bytes from file Logs/20180125T210845/Express0001.lzma
2018-01-25T21:22:00.230Z,1516915320.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:00.565Z,1516915320.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:00.911Z,1516915320.911 [DataOverHttps](INFO): Moved sent file to Logs/20180125T210845/Express0001.lzma.bak
2018-01-25T21:22:00.911Z,1516915320.911 [DataOverHttps](INFO): SBD MOMSN=7761199
2018-01-25T21:22:00.914Z,1516915320.914 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:22:00.915Z,1516915320.915 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:00.992Z,1516915320.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:01.706Z,1516915321.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:01.822Z,1516915321.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:02.114Z,1516915322.114 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:22:02.115Z,1516915322.115 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:02.719Z,1516915322.719 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:22:02.721Z,1516915322.721 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:03.922Z,1516915323.922 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:22:03.923Z,1516915323.923 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:05.122Z,1516915325.122 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:22:05.123Z,1516915325.123 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:05.227Z,1516915325.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:05.378Z,1516915325.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:05.736Z,1516915325.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:05.752Z,1516915325.752 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:22:05.753Z,1516915325.753 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:06.131Z,1516915326.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:06.518Z,1516915326.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:06.934Z,1516915326.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:06.958Z,1516915326.958 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:22:06.959Z,1516915326.959 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:07.727Z,1516915327.727 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:22:07.728Z,1516915327.728 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:08.926Z,1516915328.926 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:22:08.927Z,1516915328.927 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:10.126Z,1516915330.126 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:22:10.127Z,1516915330.127 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:10.319Z,1516915330.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:10.403Z,1516915330.403 [DataOverHttps](INFO): Sending 78 bytes from file Logs/20180125T210845/Express0005.lzma
2018-01-25T21:22:10.471Z,1516915330.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:10.731Z,1516915330.731 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:22:10.733Z,1516915330.733 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:10.810Z,1516915330.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:11.164Z,1516915331.164 [DataOverHttps](INFO): Moved sent file to Logs/20180125T210845/Express0005.lzma.bak
2018-01-25T21:22:11.164Z,1516915331.164 [DataOverHttps](INFO): SBD MOMSN=7761213
2018-01-25T21:22:11.255Z,1516915331.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:11.958Z,1516915331.958 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:22:11.959Z,1516915331.959 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:12.734Z,1516915332.734 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:22:12.736Z,1516915332.736 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:13.934Z,1516915333.934 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:22:13.935Z,1516915333.935 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:15.134Z,1516915335.134 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:22:15.135Z,1516915335.135 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:15.739Z,1516915335.739 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:22:15.740Z,1516915335.740 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:16.938Z,1516915336.938 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:22:16.939Z,1516915336.939 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:18.138Z,1516915338.138 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:22:18.139Z,1516915338.139 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:18.650Z,1516915338.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:18.653Z,1516915338.653 [Startup:StartupSatComms:B](INFO): Timed out from 2018-01-25T21:21:15.3Z
2018-01-25T21:22:18.653Z,1516915338.653 [Startup:StartupSatComms:B] Stopped
2018-01-25T21:22:18.653Z,1516915338.653 [Startup:StartupSatComms](INFO): Completed Startup:StartupSatComms
2018-01-25T21:22:18.653Z,1516915338.653 [Startup:StartupSatComms] Stopped
2018-01-25T21:22:18.654Z,1516915338.654 [Startup:StartupSatComms](DEBUG): Aggregate::uninitialize Startup:StartupSatComms
2018-01-25T21:22:18.654Z,1516915338.654 [Startup](INFO): Completed Startup
2018-01-25T21:22:18.655Z,1516915338.655 [MissionManager](INFO): Startup is completed.
2018-01-25T21:22:18.655Z,1516915338.655 [MissionManager](INFO): Uninitializing Mission Startup
2018-01-25T21:22:18.655Z,1516915338.655 [Startup] Stopped
2018-01-25T21:22:18.655Z,1516915338.655 [Startup](DEBUG): Aggregate::uninitialize Startup
2018-01-25T21:22:18.655Z,1516915338.655 [Startup:A.GoToSurface] Stopped
2018-01-25T21:22:18.655Z,1516915338.655 [Startup:A.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2018-01-25T21:22:18.744Z,1516915338.744 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:22:18.745Z,1516915338.745 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:18.838Z,1516915338.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:18.845Z,1516915338.845 [MissionManager](IMPORTANT): Started mission Default
2018-01-25T21:22:18.846Z,1516915338.846 [Default] Running Loop=1
2018-01-25T21:22:18.847Z,1516915338.847 [Default](DEBUG): Aggregate::initialize Default
2018-01-25T21:22:18.847Z,1516915338.847 [Default:B.GoToSurface] Running Loop=1
2018-01-25T21:22:18.848Z,1516915338.848 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2018-01-25T21:22:18.853Z,1516915338.853 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2018-01-25T21:22:18.853Z,1516915338.853 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2018-01-25T21:22:18.853Z,1516915338.853 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2018-01-25T21:22:18.854Z,1516915338.854 [Default:B.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds.
2018-01-25T21:22:18.854Z,1516915338.854 [Default:B.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2018-01-25T21:22:18.854Z,1516915338.854 [Default:A.Wait] Running Loop=1
2018-01-25T21:22:18.854Z,1516915338.854 [Default:A.Wait](DEBUG): Initialize Wait Component.
2018-01-25T21:22:19.946Z,1516915339.946 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:22:19.947Z,1516915339.947 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:21.146Z,1516915341.146 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:22:21.147Z,1516915341.147 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:21.749Z,1516915341.749 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:22:21.750Z,1516915341.750 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:22.249Z,1516915342.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:22.374Z,1516915342.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:22.709Z,1516915342.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:22.950Z,1516915342.950 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:22:22.951Z,1516915342.951 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:23.123Z,1516915343.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:23.523Z,1516915343.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:23.666Z,1516915343.666 [CommandLine](IMPORTANT): got command get CTD_Seabird.bin_median_sea_water_electrical_conductivity 
2018-01-25T21:22:23.667Z,1516915343.667 [CommandLine](IMPORTANT): CTD_Seabird.bin_median_sea_water_electrical_conductivity nan mmho/cm
2018-01-25T21:22:23.927Z,1516915343.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:24.150Z,1516915344.150 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:22:24.151Z,1516915344.151 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:24.326Z,1516915344.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:24.717Z,1516915344.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:24.753Z,1516915344.753 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:22:24.754Z,1516915344.754 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:25.118Z,1516915345.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:25.521Z,1516915345.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:25.918Z,1516915345.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:25.954Z,1516915345.954 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:22:25.955Z,1516915345.955 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:26.322Z,1516915346.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:26.726Z,1516915346.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:27.106Z,1516915347.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:27.154Z,1516915347.154 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:22:27.155Z,1516915347.155 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:27.506Z,1516915347.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:27.758Z,1516915347.758 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:22:27.759Z,1516915347.759 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:27.932Z,1516915347.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:28.310Z,1516915348.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:28.761Z,1516915348.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:28.958Z,1516915348.958 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:22:28.959Z,1516915348.959 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:29.118Z,1516915349.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:29.515Z,1516915349.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:29.911Z,1516915349.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:30.158Z,1516915350.158 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:22:30.159Z,1516915350.159 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:30.314Z,1516915350.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:30.707Z,1516915350.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:30.762Z,1516915350.762 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:22:30.764Z,1516915350.764 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:31.122Z,1516915351.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:31.519Z,1516915351.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:31.912Z,1516915351.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:31.919Z,1516915351.919 [Default:A.Wait](INFO): Done Waiting.
2018-01-25T21:22:31.920Z,1516915351.920 [Default:A.Wait] Stopped
2018-01-25T21:22:31.920Z,1516915351.920 [Default:A.Wait](DEBUG): Uninitialize Wait Component.
2018-01-25T21:22:31.962Z,1516915351.962 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:22:31.964Z,1516915351.964 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:32.318Z,1516915352.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:32.321Z,1516915352.321 [Default:CheckIn] Running Loop=1
2018-01-25T21:22:32.321Z,1516915352.321 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-25T21:22:32.321Z,1516915352.321 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-25T21:22:32.722Z,1516915352.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:32.725Z,1516915352.725 [Default:CheckIn:Read_GPS](DEBUG): Initialize ReadDataComponent to sense time_fix
2018-01-25T21:22:33.122Z,1516915353.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:33.162Z,1516915353.162 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:22:33.164Z,1516915353.164 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:33.526Z,1516915353.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:33.767Z,1516915353.767 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:22:33.768Z,1516915353.768 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:33.934Z,1516915353.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:34.321Z,1516915354.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:34.733Z,1516915354.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:34.970Z,1516915354.970 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:22:34.971Z,1516915354.971 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:35.127Z,1516915355.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:35.522Z,1516915355.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:35.930Z,1516915355.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:36.170Z,1516915356.170 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:22:36.171Z,1516915356.171 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:36.333Z,1516915356.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:36.738Z,1516915356.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:36.772Z,1516915356.772 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:22:36.773Z,1516915356.773 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:37.118Z,1516915357.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:37.517Z,1516915357.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:37.921Z,1516915357.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:37.974Z,1516915357.974 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:22:37.975Z,1516915357.975 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:38.326Z,1516915358.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:38.719Z,1516915358.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:39.121Z,1516915359.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:39.174Z,1516915359.174 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:22:39.176Z,1516915359.176 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:39.532Z,1516915359.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:39.776Z,1516915359.776 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:22:39.777Z,1516915359.777 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:39.946Z,1516915359.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:40.315Z,1516915360.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:40.704Z,1516915360.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:40.978Z,1516915360.978 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:22:40.979Z,1516915360.979 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:41.112Z,1516915361.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:41.516Z,1516915361.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:41.909Z,1516915361.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:42.178Z,1516915362.178 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:22:42.179Z,1516915362.179 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:42.314Z,1516915362.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:42.707Z,1516915362.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:42.781Z,1516915362.781 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:22:42.782Z,1516915362.782 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:43.113Z,1516915363.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:43.518Z,1516915363.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:43.908Z,1516915363.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:43.982Z,1516915363.982 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:22:43.984Z,1516915363.984 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:44.325Z,1516915364.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:44.724Z,1516915364.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:45.121Z,1516915365.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:45.183Z,1516915365.183 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:22:45.184Z,1516915365.184 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:45.522Z,1516915365.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:45.785Z,1516915365.785 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:22:45.787Z,1516915365.787 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:45.916Z,1516915365.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:46.308Z,1516915366.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:46.712Z,1516915366.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:46.986Z,1516915366.986 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:22:46.987Z,1516915366.987 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:47.126Z,1516915367.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:47.512Z,1516915367.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:47.918Z,1516915367.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:48.186Z,1516915368.186 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:22:48.188Z,1516915368.188 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:48.331Z,1516915368.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:48.730Z,1516915368.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:48.790Z,1516915368.790 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:22:48.791Z,1516915368.791 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:49.109Z,1516915369.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:49.536Z,1516915369.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:49.983Z,1516915369.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:49.990Z,1516915369.990 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:22:49.991Z,1516915369.991 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:50.311Z,1516915370.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:50.741Z,1516915370.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:51.106Z,1516915371.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:51.190Z,1516915371.190 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:22:51.191Z,1516915371.191 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:51.514Z,1516915371.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:51.686Z,1516915371.686 [CommandLine](IMPORTANT): got command get CTD_Seabird.bin_median_sea_water_temperature
2018-01-25T21:22:51.687Z,1516915371.687 [CommandLine](IMPORTANT): CTD_Seabird.bin_median_sea_water_temperature nan degC
2018-01-25T21:22:51.806Z,1516915371.806 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:22:51.807Z,1516915371.807 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:51.932Z,1516915371.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:52.313Z,1516915372.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:52.718Z,1516915372.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:53.006Z,1516915373.006 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:22:53.007Z,1516915373.007 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:53.125Z,1516915373.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:53.517Z,1516915373.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:53.798Z,1516915373.798 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:22:53.799Z,1516915373.799 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:53.918Z,1516915373.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:54.306Z,1516915374.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:54.751Z,1516915374.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:54.998Z,1516915374.998 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:22:54.999Z,1516915374.999 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:55.134Z,1516915375.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:55.534Z,1516915375.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:55.911Z,1516915375.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:56.198Z,1516915376.198 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:22:56.199Z,1516915376.199 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:56.314Z,1516915376.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:56.708Z,1516915376.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:56.802Z,1516915376.802 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:22:56.804Z,1516915376.804 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:57.114Z,1516915377.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:57.508Z,1516915377.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:57.908Z,1516915377.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:58.002Z,1516915378.002 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:22:58.003Z,1516915378.003 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:58.314Z,1516915378.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:58.708Z,1516915378.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:59.108Z,1516915379.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:59.202Z,1516915379.202 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:22:59.203Z,1516915379.203 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:59.504Z,1516915379.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:22:59.807Z,1516915379.807 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:22:59.808Z,1516915379.808 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:22:59.934Z,1516915379.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:00.312Z,1516915380.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:00.715Z,1516915380.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:01.010Z,1516915381.010 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:01.011Z,1516915381.011 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:01.123Z,1516915381.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:01.507Z,1516915381.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:01.908Z,1516915381.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:02.210Z,1516915382.210 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:02.211Z,1516915382.211 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:02.308Z,1516915382.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:02.720Z,1516915382.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:02.812Z,1516915382.812 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:02.813Z,1516915382.813 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:03.117Z,1516915383.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:03.517Z,1516915383.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:03.911Z,1516915383.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:04.014Z,1516915384.014 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:04.015Z,1516915384.015 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:04.317Z,1516915384.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:04.707Z,1516915384.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:05.126Z,1516915385.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:05.214Z,1516915385.214 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:05.215Z,1516915385.215 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:05.517Z,1516915385.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:05.816Z,1516915385.816 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:05.818Z,1516915385.818 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:05.922Z,1516915385.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:06.330Z,1516915386.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:06.709Z,1516915386.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:07.018Z,1516915387.018 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:07.019Z,1516915387.019 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:07.121Z,1516915387.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:07.518Z,1516915387.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:07.926Z,1516915387.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:08.218Z,1516915388.218 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:08.219Z,1516915388.219 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:08.362Z,1516915388.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:08.742Z,1516915388.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:08.821Z,1516915388.821 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:08.823Z,1516915388.823 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:09.116Z,1516915389.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:09.513Z,1516915389.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:09.902Z,1516915389.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:10.022Z,1516915390.022 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:10.023Z,1516915390.023 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:10.342Z,1516915390.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:10.731Z,1516915390.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:11.127Z,1516915391.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:11.230Z,1516915391.230 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:11.232Z,1516915391.232 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:11.532Z,1516915391.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:11.826Z,1516915391.826 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:11.827Z,1516915391.827 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:11.919Z,1516915391.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:12.357Z,1516915392.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:12.713Z,1516915392.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:13.027Z,1516915393.027 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:13.029Z,1516915393.029 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:13.159Z,1516915393.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:13.500Z,1516915393.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:13.904Z,1516915393.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:14.230Z,1516915394.230 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:23:14.231Z,1516915394.231 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:14.333Z,1516915394.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:14.710Z,1516915394.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:14.830Z,1516915394.830 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:14.831Z,1516915394.831 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:15.109Z,1516915395.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:15.519Z,1516915395.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:15.918Z,1516915395.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:16.030Z,1516915396.030 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:16.031Z,1516915396.031 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:16.318Z,1516915396.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:16.718Z,1516915396.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:17.106Z,1516915397.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:17.232Z,1516915397.232 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:17.233Z,1516915397.233 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:17.510Z,1516915397.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:17.835Z,1516915397.835 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:17.836Z,1516915397.836 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:17.934Z,1516915397.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:18.311Z,1516915398.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:18.722Z,1516915398.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:19.034Z,1516915399.034 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:19.035Z,1516915399.035 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:19.128Z,1516915399.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:20.234Z,1516915400.234 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:23:20.235Z,1516915400.235 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:20.851Z,1516915400.851 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:23:20.853Z,1516915400.853 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:22.054Z,1516915402.054 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:23:22.055Z,1516915402.055 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:22.677Z,1516915402.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:22.739Z,1516915402.739 [DataOverHttps](INFO): Sending 716 bytes from file Logs/20180125T211210/Express0001.lzma
2018-01-25T21:23:22.836Z,1516915402.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:22.843Z,1516915402.843 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:22.844Z,1516915402.844 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:23.144Z,1516915403.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:23.499Z,1516915403.499 [DataOverHttps](INFO): Moved sent file to Logs/20180125T211210/Express0001.lzma.bak
2018-01-25T21:23:23.499Z,1516915403.499 [DataOverHttps](INFO): SBD MOMSN=7761216
2018-01-25T21:23:23.577Z,1516915403.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:23.936Z,1516915403.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:24.042Z,1516915404.042 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:24.043Z,1516915404.043 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:24.346Z,1516915404.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:24.746Z,1516915404.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:25.136Z,1516915405.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:25.242Z,1516915405.242 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:25.243Z,1516915405.243 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:25.541Z,1516915405.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:25.847Z,1516915405.847 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:25.849Z,1516915405.849 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:25.948Z,1516915405.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:26.329Z,1516915406.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:26.728Z,1516915406.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:27.050Z,1516915407.050 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:27.051Z,1516915407.051 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:27.166Z,1516915407.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:27.562Z,1516915407.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:27.943Z,1516915407.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:28.252Z,1516915408.252 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:28.254Z,1516915408.254 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:28.411Z,1516915408.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:28.757Z,1516915408.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:28.852Z,1516915408.852 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:28.853Z,1516915408.853 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:29.147Z,1516915409.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:29.537Z,1516915409.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:29.726Z,1516915409.726 [CommandLine](IMPORTANT): got command get CTD_Seabird.sea_water_temperature
2018-01-25T21:23:29.727Z,1516915409.727 [CommandLine](IMPORTANT): CTD_Seabird.sea_water_temperature 22.181604 degC
2018-01-25T21:23:29.931Z,1516915409.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:30.054Z,1516915410.054 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:30.055Z,1516915410.055 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:30.334Z,1516915410.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:30.734Z,1516915410.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:31.134Z,1516915411.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:31.254Z,1516915411.254 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:31.255Z,1516915411.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:31.534Z,1516915411.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:31.856Z,1516915411.856 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:23:31.858Z,1516915411.858 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:31.946Z,1516915411.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:32.342Z,1516915412.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:32.747Z,1516915412.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:33.058Z,1516915413.058 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:33.059Z,1516915413.059 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:33.154Z,1516915413.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:33.544Z,1516915413.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:33.958Z,1516915413.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:34.258Z,1516915414.258 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:23:34.259Z,1516915414.259 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:34.358Z,1516915414.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:34.770Z,1516915414.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:34.861Z,1516915414.861 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:34.863Z,1516915414.863 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:35.144Z,1516915415.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:35.536Z,1516915415.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:35.936Z,1516915415.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:36.062Z,1516915416.062 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:36.063Z,1516915416.063 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:36.343Z,1516915416.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:36.746Z,1516915416.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:37.145Z,1516915417.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:37.262Z,1516915417.262 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:37.263Z,1516915417.263 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:37.541Z,1516915417.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:37.866Z,1516915417.866 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:37.868Z,1516915417.868 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:37.970Z,1516915417.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:38.351Z,1516915418.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:38.762Z,1516915418.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:39.066Z,1516915419.066 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:39.067Z,1516915419.067 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:39.179Z,1516915419.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:39.537Z,1516915419.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:39.936Z,1516915419.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:40.266Z,1516915420.266 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:40.267Z,1516915420.267 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:40.359Z,1516915420.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:40.736Z,1516915420.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:40.781Z,1516915420.781 [CommandLine](IMPORTANT): got command get CTD_Seabird.bin_median_sea_water_temperature
2018-01-25T21:23:40.782Z,1516915420.782 [CommandLine](IMPORTANT): CTD_Seabird.bin_median_sea_water_temperature nan degC
2018-01-25T21:23:40.870Z,1516915420.870 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:40.872Z,1516915420.872 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:41.147Z,1516915421.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:41.540Z,1516915421.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:41.945Z,1516915421.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:42.070Z,1516915422.070 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:42.071Z,1516915422.071 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:42.347Z,1516915422.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:42.740Z,1516915422.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:43.145Z,1516915423.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:43.272Z,1516915423.272 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:43.273Z,1516915423.273 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:43.549Z,1516915423.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:43.875Z,1516915423.875 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:43.877Z,1516915423.877 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:43.970Z,1516915423.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:44.357Z,1516915424.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:44.736Z,1516915424.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:45.078Z,1516915425.078 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:45.079Z,1516915425.079 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:45.177Z,1516915425.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:45.543Z,1516915425.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:45.940Z,1516915425.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:46.281Z,1516915426.281 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:46.282Z,1516915426.282 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:46.354Z,1516915426.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:46.747Z,1516915426.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:46.880Z,1516915426.880 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:46.882Z,1516915426.882 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:47.147Z,1516915427.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:47.549Z,1516915427.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:47.947Z,1516915427.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:48.084Z,1516915428.084 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:48.085Z,1516915428.085 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:48.354Z,1516915428.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:48.752Z,1516915428.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:49.150Z,1516915429.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:49.286Z,1516915429.286 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:49.287Z,1516915429.287 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:49.557Z,1516915429.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:49.889Z,1516915429.889 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:49.891Z,1516915429.891 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:49.962Z,1516915429.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:50.354Z,1516915430.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:50.773Z,1516915430.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:51.098Z,1516915431.098 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:51.099Z,1516915431.099 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:51.162Z,1516915431.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:51.550Z,1516915431.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:51.953Z,1516915431.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:52.298Z,1516915432.298 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:52.299Z,1516915432.299 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:52.361Z,1516915432.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:52.730Z,1516915432.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:52.889Z,1516915432.889 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:52.890Z,1516915432.890 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:53.137Z,1516915433.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:53.502Z,1516915433.502 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-01-25T21:23:53.535Z,1516915433.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:53.970Z,1516915433.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:54.098Z,1516915434.098 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:54.099Z,1516915434.099 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:54.373Z,1516915434.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:54.749Z,1516915434.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:54.892Z,1516915434.892 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:54.893Z,1516915434.893 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:55.155Z,1516915435.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:55.559Z,1516915435.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:55.969Z,1516915435.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:56.094Z,1516915436.094 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:23:56.095Z,1516915436.095 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:56.334Z,1516915436.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:56.755Z,1516915436.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:57.146Z,1516915437.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:57.294Z,1516915437.294 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:23:57.295Z,1516915437.295 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:57.558Z,1516915437.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:57.904Z,1516915437.904 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:57.905Z,1516915437.905 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:57.979Z,1516915437.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:58.354Z,1516915438.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:58.741Z,1516915438.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:59.106Z,1516915439.106 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:23:59.107Z,1516915439.107 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:23:59.179Z,1516915439.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:59.558Z,1516915439.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:23:59.958Z,1516915439.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:00.306Z,1516915440.306 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:24:00.308Z,1516915440.308 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:00.362Z,1516915440.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:00.730Z,1516915440.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:00.901Z,1516915440.901 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:24:00.903Z,1516915440.903 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:01.158Z,1516915441.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:01.543Z,1516915441.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:01.969Z,1516915441.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:02.102Z,1516915442.102 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:24:02.103Z,1516915442.103 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:02.368Z,1516915442.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:02.736Z,1516915442.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:03.173Z,1516915443.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:03.302Z,1516915443.302 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:24:03.304Z,1516915443.304 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:03.538Z,1516915443.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:03.907Z,1516915443.907 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:24:03.909Z,1516915443.909 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:03.954Z,1516915443.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:04.347Z,1516915444.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:04.744Z,1516915444.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:05.120Z,1516915445.120 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:24:05.141Z,1516915445.141 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:05.167Z,1516915445.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:05.562Z,1516915445.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:05.947Z,1516915445.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:06.342Z,1516915446.342 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:24:06.343Z,1516915446.343 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:06.350Z,1516915446.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:06.749Z,1516915446.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:06.910Z,1516915446.910 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:24:06.912Z,1516915446.912 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:07.147Z,1516915447.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:07.549Z,1516915447.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:07.955Z,1516915447.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:08.110Z,1516915448.110 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:24:08.111Z,1516915448.111 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:08.354Z,1516915448.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:08.737Z,1516915448.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:09.147Z,1516915449.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:09.310Z,1516915449.310 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:24:09.312Z,1516915449.312 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:09.550Z,1516915449.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:09.916Z,1516915449.916 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:24:09.917Z,1516915449.917 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:09.963Z,1516915449.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:10.367Z,1516915450.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:10.753Z,1516915450.753 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:10.753Z,1516915450.753 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2018-01-25T21:24:10.753Z,1516915450.753 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-25T21:24:10.755Z,1516915450.755 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:10.755Z,1516915450.755 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2018-01-25T21:24:10.755Z,1516915450.755 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-25T21:24:10.757Z,1516915450.757 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:10.757Z,1516915450.757 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-01-25T21:24:10.757Z,1516915450.757 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-25T21:24:10.769Z,1516915450.769 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-25T21:24:10.769Z,1516915450.769 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-25T21:24:10.769Z,1516915450.769 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-25T21:24:11.118Z,1516915451.118 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:24:11.119Z,1516915451.119 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:11.197Z,1516915451.197 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-25T21:24:11.197Z,1516915451.197 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2018-01-25T21:24:11.197Z,1516915451.197 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-25T21:24:11.197Z,1516915451.197 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2018-01-25T21:24:11.198Z,1516915451.198 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-25T21:24:11.198Z,1516915451.198 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-01-25T21:24:11.538Z,1516915451.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-25T21:24:11.539Z,1516915451.539 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T21:24:11.539Z,1516915451.539 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T21:24:11.539Z,1516915451.539 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-25T21:24:11.540Z,1516915451.540 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T21:24:11.540Z,1516915451.540 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T21:24:11.540Z,1516915451.540 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-25T21:24:11.541Z,1516915451.541 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T21:24:11.541Z,1516915451.541 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T21:24:11.949Z,1516915451.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-25T21:24:11.950Z,1516915451.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:12.318Z,1516915452.318 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:24:12.320Z,1516915452.320 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:12.370Z,1516915452.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-25T21:24:12.371Z,1516915452.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:12.737Z,1516915452.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-25T21:24:12.738Z,1516915452.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:12.920Z,1516915452.920 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:24:12.921Z,1516915452.921 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:13.139Z,1516915453.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-25T21:24:13.140Z,1516915453.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:13.550Z,1516915453.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-25T21:24:13.551Z,1516915453.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:13.957Z,1516915453.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-25T21:24:13.958Z,1516915453.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:14.122Z,1516915454.122 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:24:14.124Z,1516915454.124 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:14.350Z,1516915454.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-25T21:24:14.351Z,1516915454.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:14.743Z,1516915454.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-25T21:24:14.744Z,1516915454.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:15.145Z,1516915455.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-25T21:24:15.146Z,1516915455.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:15.322Z,1516915455.322 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:24:15.323Z,1516915455.323 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:15.546Z,1516915455.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-25T21:24:15.547Z,1516915455.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:15.926Z,1516915455.926 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:24:15.928Z,1516915455.928 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:15.974Z,1516915455.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-25T21:24:15.975Z,1516915455.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:16.347Z,1516915456.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-25T21:24:16.348Z,1516915456.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:16.749Z,1516915456.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-25T21:24:16.750Z,1516915456.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:17.126Z,1516915457.126 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:24:17.127Z,1516915457.127 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:17.185Z,1516915457.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-25T21:24:17.186Z,1516915457.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:17.549Z,1516915457.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-25T21:24:17.550Z,1516915457.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:17.958Z,1516915457.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-25T21:24:17.959Z,1516915457.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:18.326Z,1516915458.326 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:24:18.327Z,1516915458.327 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:18.350Z,1516915458.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-25T21:24:18.351Z,1516915458.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:18.734Z,1516915458.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-25T21:24:18.735Z,1516915458.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:18.929Z,1516915458.929 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:24:18.931Z,1516915458.931 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:19.138Z,1516915459.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-25T21:24:19.139Z,1516915459.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:20.130Z,1516915460.130 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:24:20.131Z,1516915460.131 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:21.330Z,1516915461.330 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:24:21.331Z,1516915461.331 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:21.934Z,1516915461.934 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:24:21.935Z,1516915461.935 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:23.134Z,1516915463.134 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:24:23.135Z,1516915463.135 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:23.138Z,1516915463.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:24:23.198Z,1516915463.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-25T21:24:23.199Z,1516915463.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:23.290Z,1516915463.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:24:23.322Z,1516915463.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.6 s old, using for 20.0 s.
2018-01-25T21:24:23.323Z,1516915463.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:23.675Z,1516915463.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:24:23.689Z,1516915463.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-01-25T21:24:23.690Z,1516915463.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:24.062Z,1516915464.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:24:24.091Z,1516915464.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-01-25T21:24:24.092Z,1516915464.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:24.334Z,1516915464.334 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:24:24.335Z,1516915464.335 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:24.467Z,1516915464.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:24:24.494Z,1516915464.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-01-25T21:24:24.495Z,1516915464.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:24.859Z,1516915464.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:24:24.883Z,1516915464.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-01-25T21:24:24.883Z,1516915464.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:24.940Z,1516915464.940 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:24:24.941Z,1516915464.941 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:25.278Z,1516915465.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:24:25.305Z,1516915465.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s.
2018-01-25T21:24:25.306Z,1516915465.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:25.676Z,1516915465.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:24:25.690Z,1516915465.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-01-25T21:24:25.690Z,1516915465.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:26.070Z,1516915466.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:24:26.089Z,1516915466.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-01-25T21:24:26.090Z,1516915466.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:26.142Z,1516915466.142 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:24:26.143Z,1516915466.143 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:26.460Z,1516915466.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:24:26.494Z,1516915466.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-01-25T21:24:26.494Z,1516915466.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:26.855Z,1516915466.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:24:26.893Z,1516915466.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-01-25T21:24:26.894Z,1516915466.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:27.214Z,1516915467.214 [CommandLine](IMPORTANT): got command get CTD_Seabird.bin_median_sea_water_temperature
2018-01-25T21:24:27.215Z,1516915467.215 [CommandLine](IMPORTANT): CTD_Seabird.bin_median_sea_water_temperature nan degC
2018-01-25T21:24:27.266Z,1516915467.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:24:27.288Z,1516915467.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-01-25T21:24:27.291Z,1516915467.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:27.342Z,1516915467.342 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:24:27.343Z,1516915467.343 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:27.660Z,1516915467.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:24:27.677Z,1516915467.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-01-25T21:24:27.678Z,1516915467.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:27.943Z,1516915467.943 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:24:27.944Z,1516915467.944 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:28.061Z,1516915468.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:24:28.075Z,1516915468.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-01-25T21:24:28.075Z,1516915468.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:28.474Z,1516915468.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:24:28.487Z,1516915468.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-01-25T21:24:28.488Z,1516915468.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:28.889Z,1516915468.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-01-25T21:24:28.890Z,1516915468.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:29.146Z,1516915469.146 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:24:29.147Z,1516915469.147 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:29.294Z,1516915469.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-01-25T21:24:29.295Z,1516915469.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:29.677Z,1516915469.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-01-25T21:24:29.678Z,1516915469.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:30.079Z,1516915470.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-01-25T21:24:30.080Z,1516915470.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:30.346Z,1516915470.346 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:24:30.347Z,1516915470.347 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:30.477Z,1516915470.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-01-25T21:24:30.478Z,1516915470.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:30.885Z,1516915470.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:30.948Z,1516915470.948 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:24:30.949Z,1516915470.949 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:31.287Z,1516915471.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:31.687Z,1516915471.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:32.085Z,1516915472.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:32.150Z,1516915472.150 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:24:32.151Z,1516915472.151 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:32.484Z,1516915472.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:32.876Z,1516915472.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:33.276Z,1516915473.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:33.350Z,1516915473.350 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:24:33.351Z,1516915473.351 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:33.690Z,1516915473.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:33.952Z,1516915473.952 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:24:33.953Z,1516915473.953 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:34.076Z,1516915474.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:34.494Z,1516915474.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:34.896Z,1516915474.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:35.154Z,1516915475.154 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:24:35.155Z,1516915475.155 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:35.291Z,1516915475.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:35.686Z,1516915475.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:36.089Z,1516915476.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:36.354Z,1516915476.354 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:24:36.355Z,1516915476.355 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:36.478Z,1516915476.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:36.890Z,1516915476.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:36.957Z,1516915476.957 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:24:36.958Z,1516915476.958 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:37.303Z,1516915477.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:37.693Z,1516915477.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:38.095Z,1516915478.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:38.158Z,1516915478.158 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:24:38.159Z,1516915478.159 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:38.469Z,1516915478.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:38.874Z,1516915478.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:39.274Z,1516915479.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:39.358Z,1516915479.358 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:24:39.360Z,1516915479.360 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:39.678Z,1516915479.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:39.961Z,1516915479.961 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:24:39.963Z,1516915479.963 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:40.078Z,1516915480.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:40.503Z,1516915480.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:40.900Z,1516915480.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:41.162Z,1516915481.162 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:24:41.163Z,1516915481.163 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:41.296Z,1516915481.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:41.680Z,1516915481.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:42.077Z,1516915482.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:42.362Z,1516915482.362 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:24:42.363Z,1516915482.363 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:42.482Z,1516915482.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:42.876Z,1516915482.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:42.966Z,1516915482.966 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:24:42.967Z,1516915482.967 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:43.294Z,1516915483.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:43.690Z,1516915483.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:44.094Z,1516915484.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:44.166Z,1516915484.166 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:24:44.167Z,1516915484.167 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:44.489Z,1516915484.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:44.887Z,1516915484.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:45.279Z,1516915485.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:45.366Z,1516915485.366 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:24:45.368Z,1516915485.368 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:45.685Z,1516915485.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:45.971Z,1516915485.971 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:24:45.972Z,1516915485.972 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:46.087Z,1516915486.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:46.488Z,1516915486.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:46.896Z,1516915486.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:47.170Z,1516915487.170 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:24:47.171Z,1516915487.171 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:47.292Z,1516915487.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:47.679Z,1516915487.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:48.090Z,1516915488.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:48.370Z,1516915488.370 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:24:48.371Z,1516915488.371 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:48.486Z,1516915488.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:48.876Z,1516915488.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:48.975Z,1516915488.975 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:24:48.977Z,1516915488.977 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:49.287Z,1516915489.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:49.690Z,1516915489.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:50.086Z,1516915490.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:50.178Z,1516915490.178 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:24:50.179Z,1516915490.179 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:50.487Z,1516915490.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:50.876Z,1516915490.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:51.276Z,1516915491.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:51.378Z,1516915491.378 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:24:51.379Z,1516915491.379 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:51.688Z,1516915491.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:51.980Z,1516915491.980 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:24:51.983Z,1516915491.983 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:52.081Z,1516915492.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:52.487Z,1516915492.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:52.894Z,1516915492.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:53.182Z,1516915493.182 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:24:53.184Z,1516915493.184 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:53.318Z,1516915493.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:53.684Z,1516915493.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:54.098Z,1516915494.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:54.382Z,1516915494.382 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:24:54.384Z,1516915494.384 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:54.482Z,1516915494.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:54.874Z,1516915494.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:54.987Z,1516915494.987 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:24:54.989Z,1516915494.989 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:55.301Z,1516915495.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:55.699Z,1516915495.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:56.103Z,1516915496.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:56.193Z,1516915496.193 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:24:56.194Z,1516915496.194 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:56.486Z,1516915496.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:56.872Z,1516915496.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:56.988Z,1516915496.988 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:24:56.989Z,1516915496.989 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:57.305Z,1516915497.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:57.687Z,1516915497.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:58.106Z,1516915498.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:58.191Z,1516915498.191 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:24:58.210Z,1516915498.210 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:58.477Z,1516915498.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:58.878Z,1516915498.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:58.991Z,1516915498.991 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:24:58.992Z,1516915498.992 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:24:59.279Z,1516915499.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:24:59.690Z,1516915499.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:00.086Z,1516915500.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:00.190Z,1516915500.190 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:00.191Z,1516915500.191 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:00.295Z,1516915500.295 [CommandLine](IMPORTANT): got command get CTD_Seabird.bin_median_sea_water_temperature
2018-01-25T21:25:00.295Z,1516915500.295 [CommandLine](IMPORTANT): CTD_Seabird.bin_median_sea_water_temperature nan degC
2018-01-25T21:25:00.483Z,1516915500.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:00.872Z,1516915500.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:01.286Z,1516915501.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:01.390Z,1516915501.390 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:01.391Z,1516915501.391 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:01.683Z,1516915501.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:01.996Z,1516915501.996 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:25:02.002Z,1516915502.002 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:02.083Z,1516915502.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:02.477Z,1516915502.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:02.876Z,1516915502.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:03.202Z,1516915503.202 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:03.203Z,1516915503.203 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:03.302Z,1516915503.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:03.690Z,1516915503.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:04.090Z,1516915504.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:04.404Z,1516915504.404 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:04.406Z,1516915504.406 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:04.484Z,1516915504.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:04.889Z,1516915504.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:04.000Z,1516915505.000 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:05.001Z,1516915505.001 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:05.295Z,1516915505.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:05.687Z,1516915505.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:06.094Z,1516915506.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:06.202Z,1516915506.202 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:06.203Z,1516915506.203 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:06.484Z,1516915506.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:06.876Z,1516915506.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:07.286Z,1516915507.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:07.402Z,1516915507.402 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:07.403Z,1516915507.403 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:07.694Z,1516915507.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:08.005Z,1516915508.005 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:08.006Z,1516915508.006 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:08.089Z,1516915508.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:08.456Z,1516915508.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:25:08.490Z,1516915508.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:08.855Z,1516915508.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:25:08.886Z,1516915508.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:09.206Z,1516915509.206 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:09.207Z,1516915509.207 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:09.278Z,1516915509.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:25:09.291Z,1516915509.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:09.677Z,1516915509.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:25:09.698Z,1516915509.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:10.070Z,1516915510.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:25:10.089Z,1516915510.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:10.406Z,1516915510.406 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:10.407Z,1516915510.407 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:10.462Z,1516915510.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:25:10.484Z,1516915510.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:10.855Z,1516915510.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:25:10.894Z,1516915510.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:11.010Z,1516915511.010 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:11.011Z,1516915511.011 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:11.266Z,1516915511.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:25:11.292Z,1516915511.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:11.670Z,1516915511.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:25:11.695Z,1516915511.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:12.083Z,1516915512.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:12.210Z,1516915512.210 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:12.211Z,1516915512.211 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:12.482Z,1516915512.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:12.876Z,1516915512.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:13.287Z,1516915513.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:13.410Z,1516915513.410 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:13.411Z,1516915513.411 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:13.687Z,1516915513.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:14.014Z,1516915514.014 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:14.015Z,1516915514.015 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:14.108Z,1516915514.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:14.484Z,1516915514.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:14.875Z,1516915514.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:15.214Z,1516915515.214 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:15.215Z,1516915515.215 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:15.302Z,1516915515.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:15.690Z,1516915515.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:16.090Z,1516915516.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:16.414Z,1516915516.414 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:16.415Z,1516915516.415 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:16.494Z,1516915516.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:16.888Z,1516915516.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:17.019Z,1516915517.019 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:17.020Z,1516915517.020 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:17.285Z,1516915517.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:17.694Z,1516915517.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:18.098Z,1516915518.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:18.218Z,1516915518.218 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:18.219Z,1516915518.219 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:18.480Z,1516915518.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:18.883Z,1516915518.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:19.291Z,1516915519.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:19.418Z,1516915519.418 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:19.419Z,1516915519.419 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:20.023Z,1516915520.023 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:20.025Z,1516915520.025 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:21.226Z,1516915521.226 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:21.227Z,1516915521.227 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:22.426Z,1516915522.426 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:22.427Z,1516915522.427 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:22.579Z,1516915522.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:22.723Z,1516915522.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:23.029Z,1516915523.029 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:23.030Z,1516915523.030 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:23.072Z,1516915523.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:23.458Z,1516915523.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:23.849Z,1516915523.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:24.230Z,1516915524.230 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:24.231Z,1516915524.231 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:24.270Z,1516915524.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:24.655Z,1516915524.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:25.067Z,1516915525.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:25.430Z,1516915525.430 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:25.431Z,1516915525.431 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:25.470Z,1516915525.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:25.842Z,1516915525.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:26.033Z,1516915526.033 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:26.034Z,1516915526.034 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:26.237Z,1516915526.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:26.642Z,1516915526.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:27.066Z,1516915527.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:27.234Z,1516915527.234 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:27.235Z,1516915527.235 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:27.467Z,1516915527.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:27.874Z,1516915527.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:28.268Z,1516915528.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:28.434Z,1516915528.434 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:28.435Z,1516915528.435 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:28.638Z,1516915528.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:29.039Z,1516915529.039 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:29.041Z,1516915529.041 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:29.075Z,1516915529.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:29.451Z,1516915529.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:29.848Z,1516915529.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:30.239Z,1516915530.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:30.242Z,1516915530.242 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:30.243Z,1516915530.243 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:30.653Z,1516915530.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:31.067Z,1516915531.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:31.442Z,1516915531.442 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:31.443Z,1516915531.443 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:31.453Z,1516915531.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:31.854Z,1516915531.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:32.042Z,1516915532.042 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:32.043Z,1516915532.043 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:32.243Z,1516915532.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:32.650Z,1516915532.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:33.066Z,1516915533.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:33.242Z,1516915533.242 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:33.243Z,1516915533.243 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:33.458Z,1516915533.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:33.851Z,1516915533.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:34.255Z,1516915534.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:34.442Z,1516915534.442 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:34.443Z,1516915534.443 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:34.642Z,1516915534.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:35.047Z,1516915535.047 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:35.048Z,1516915535.048 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:35.078Z,1516915535.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:35.451Z,1516915535.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:35.841Z,1516915535.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:36.240Z,1516915536.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:36.246Z,1516915536.246 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:36.247Z,1516915536.247 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:36.668Z,1516915536.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:37.069Z,1516915537.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:37.446Z,1516915537.446 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:37.447Z,1516915537.447 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:37.470Z,1516915537.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:37.841Z,1516915537.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:38.051Z,1516915538.051 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:38.052Z,1516915538.052 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:38.245Z,1516915538.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:38.646Z,1516915538.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:39.081Z,1516915539.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:39.254Z,1516915539.254 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:39.255Z,1516915539.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:39.460Z,1516915539.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:39.862Z,1516915539.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:40.256Z,1516915540.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:40.454Z,1516915540.454 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:40.455Z,1516915540.455 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:40.646Z,1516915540.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:41.056Z,1516915541.056 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:41.058Z,1516915541.058 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:41.072Z,1516915541.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:41.455Z,1516915541.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:41.839Z,1516915541.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:42.232Z,1516915542.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:42.258Z,1516915542.258 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:42.259Z,1516915542.259 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:42.677Z,1516915542.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:43.077Z,1516915543.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:43.447Z,1516915543.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:43.458Z,1516915543.458 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:43.460Z,1516915543.460 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:43.860Z,1516915543.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:44.060Z,1516915544.060 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:44.062Z,1516915544.062 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:44.247Z,1516915544.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:44.643Z,1516915544.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:45.026Z,1516915545.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:25:45.063Z,1516915545.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:45.262Z,1516915545.262 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:45.263Z,1516915545.263 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:45.436Z,1516915545.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:25:45.462Z,1516915545.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:45.840Z,1516915545.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:25:45.854Z,1516915545.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:46.237Z,1516915546.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:25:46.250Z,1516915546.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:46.462Z,1516915546.462 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:46.463Z,1516915546.463 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:46.619Z,1516915546.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:25:46.648Z,1516915546.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:47.019Z,1516915547.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:25:47.065Z,1516915547.065 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:47.066Z,1516915547.066 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:47.071Z,1516915547.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:47.419Z,1516915547.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:25:47.453Z,1516915547.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:47.820Z,1516915547.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:25:47.849Z,1516915547.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:48.219Z,1516915548.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:25:48.248Z,1516915548.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:48.266Z,1516915548.266 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:25:48.267Z,1516915548.267 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:48.630Z,1516915548.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:25:48.662Z,1516915548.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:49.052Z,1516915549.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:25:49.078Z,1516915549.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:49.430Z,1516915549.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:25:49.460Z,1516915549.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:49.466Z,1516915549.466 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:25:49.467Z,1516915549.467 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:49.827Z,1516915549.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:25:49.857Z,1516915549.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:50.070Z,1516915550.070 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:50.071Z,1516915550.071 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:50.224Z,1516915550.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:25:50.258Z,1516915550.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:50.620Z,1516915550.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:25:50.654Z,1516915550.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:51.019Z,1516915551.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:25:51.038Z,1516915551.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:51.270Z,1516915551.270 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:51.271Z,1516915551.271 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:51.434Z,1516915551.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:25:51.448Z,1516915551.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:51.834Z,1516915551.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:25:51.848Z,1516915551.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:52.230Z,1516915552.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:25:52.250Z,1516915552.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:52.470Z,1516915552.470 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:52.471Z,1516915552.471 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:52.623Z,1516915552.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:25:52.645Z,1516915552.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:53.022Z,1516915553.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:25:53.054Z,1516915553.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:53.074Z,1516915553.074 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:53.076Z,1516915553.076 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:53.453Z,1516915553.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:53.842Z,1516915553.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:54.250Z,1516915554.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:54.298Z,1516915554.298 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:54.299Z,1516915554.299 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:54.661Z,1516915554.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:55.078Z,1516915555.078 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:25:55.079Z,1516915555.079 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:55.081Z,1516915555.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:55.459Z,1516915555.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:55.838Z,1516915555.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:56.238Z,1516915556.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:56.278Z,1516915556.278 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:56.279Z,1516915556.279 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:56.638Z,1516915556.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:57.042Z,1516915557.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:57.451Z,1516915557.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:57.478Z,1516915557.478 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:57.480Z,1516915557.480 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:57.875Z,1516915557.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:58.082Z,1516915558.082 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:58.083Z,1516915558.083 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:58.258Z,1516915558.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:58.640Z,1516915558.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:59.040Z,1516915559.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:59.282Z,1516915559.282 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:25:59.283Z,1516915559.283 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:25:59.454Z,1516915559.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:25:59.845Z,1516915559.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:00.240Z,1516915560.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:00.482Z,1516915560.482 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:26:00.483Z,1516915560.483 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:00.651Z,1516915560.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:01.054Z,1516915561.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:01.088Z,1516915561.088 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:26:01.089Z,1516915561.089 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:01.453Z,1516915561.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:01.852Z,1516915561.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:02.246Z,1516915562.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:02.290Z,1516915562.290 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:26:02.291Z,1516915562.291 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:02.647Z,1516915562.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:03.052Z,1516915563.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:03.453Z,1516915563.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:03.490Z,1516915563.490 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:26:03.491Z,1516915563.491 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:03.858Z,1516915563.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:04.092Z,1516915564.092 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:26:04.094Z,1516915564.094 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:04.265Z,1516915564.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:04.654Z,1516915564.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:05.038Z,1516915565.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:05.294Z,1516915565.294 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:26:05.295Z,1516915565.295 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:05.450Z,1516915565.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:05.841Z,1516915565.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:06.240Z,1516915566.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:06.494Z,1516915566.494 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:26:06.495Z,1516915566.495 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:06.651Z,1516915566.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:07.054Z,1516915567.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:07.096Z,1516915567.096 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:26:07.097Z,1516915567.097 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:07.451Z,1516915567.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:07.842Z,1516915567.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:08.240Z,1516915568.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:08.298Z,1516915568.298 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:26:08.299Z,1516915568.299 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:08.650Z,1516915568.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:09.051Z,1516915569.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:09.451Z,1516915569.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:09.498Z,1516915569.498 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:26:09.499Z,1516915569.499 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:09.857Z,1516915569.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:10.101Z,1516915570.101 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:26:10.102Z,1516915570.102 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:10.257Z,1516915570.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:10.645Z,1516915570.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:11.058Z,1516915571.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:11.302Z,1516915571.302 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:26:11.303Z,1516915571.303 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:11.457Z,1516915571.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:11.858Z,1516915571.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:12.232Z,1516915572.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:12.502Z,1516915572.502 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:26:12.503Z,1516915572.503 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:12.660Z,1516915572.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:13.055Z,1516915573.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:13.105Z,1516915573.105 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:26:13.107Z,1516915573.107 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:13.462Z,1516915573.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:13.838Z,1516915573.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:14.238Z,1516915574.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:14.306Z,1516915574.306 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:26:14.307Z,1516915574.307 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:14.637Z,1516915574.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:15.034Z,1516915575.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:15.467Z,1516915575.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:15.506Z,1516915575.506 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:26:15.507Z,1516915575.507 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:15.863Z,1516915575.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:16.110Z,1516915576.110 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:26:16.111Z,1516915576.111 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:16.272Z,1516915576.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:16.637Z,1516915576.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:17.041Z,1516915577.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:17.311Z,1516915577.311 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:26:17.313Z,1516915577.313 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:17.449Z,1516915577.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:17.856Z,1516915577.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:18.242Z,1516915578.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:18.516Z,1516915578.516 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:26:18.517Z,1516915578.517 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:18.653Z,1516915578.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:19.054Z,1516915579.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:19.115Z,1516915579.115 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:26:19.116Z,1516915579.116 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:19.456Z,1516915579.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:20.314Z,1516915580.314 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:26:20.315Z,1516915580.315 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:21.514Z,1516915581.514 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:26:21.515Z,1516915581.515 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:22.147Z,1516915582.147 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:26:22.149Z,1516915582.149 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:22.707Z,1516915582.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:22.843Z,1516915582.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:23.209Z,1516915583.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:23.350Z,1516915583.350 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:26:23.351Z,1516915583.351 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:23.605Z,1516915583.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:23.975Z,1516915583.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:24.122Z,1516915584.122 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:26:24.123Z,1516915584.123 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:24.378Z,1516915584.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:24.774Z,1516915584.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:25.178Z,1516915585.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:25.322Z,1516915585.322 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:26:25.323Z,1516915585.323 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:25.588Z,1516915585.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:25.982Z,1516915585.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:26.383Z,1516915586.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:26.522Z,1516915586.522 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:26:26.523Z,1516915586.523 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:26.778Z,1516915586.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:27.139Z,1516915587.139 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:26:27.140Z,1516915587.140 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:27.196Z,1516915587.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:27.577Z,1516915587.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:27.969Z,1516915587.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:28.354Z,1516915588.354 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:26:28.378Z,1516915588.378 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:28.388Z,1516915588.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:28.786Z,1516915588.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:29.139Z,1516915589.139 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:26:29.141Z,1516915589.141 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:29.217Z,1516915589.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:29.586Z,1516915589.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:29.983Z,1516915589.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:30.346Z,1516915590.346 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:26:30.348Z,1516915590.348 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:30.398Z,1516915590.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:30.798Z,1516915590.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:31.136Z,1516915591.136 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:26:31.137Z,1516915591.137 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:31.210Z,1516915591.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:31.574Z,1516915591.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:31.970Z,1516915591.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:32.338Z,1516915592.338 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:26:32.339Z,1516915592.339 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:32.376Z,1516915592.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:32.776Z,1516915592.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:33.213Z,1516915593.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:33.538Z,1516915593.538 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:26:33.540Z,1516915593.540 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:33.585Z,1516915593.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:33.971Z,1516915593.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:34.138Z,1516915594.138 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:26:34.139Z,1516915594.139 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:34.382Z,1516915594.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:34.784Z,1516915594.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:35.194Z,1516915595.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:35.338Z,1516915595.338 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:26:35.339Z,1516915595.339 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:35.596Z,1516915595.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:35.978Z,1516915595.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:36.378Z,1516915596.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:36.538Z,1516915596.538 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:26:36.540Z,1516915596.540 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:36.780Z,1516915596.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:37.142Z,1516915597.142 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:26:37.144Z,1516915597.144 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:37.205Z,1516915597.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:37.590Z,1516915597.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:37.993Z,1516915597.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:38.346Z,1516915598.346 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:26:38.348Z,1516915598.348 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:38.394Z,1516915598.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:38.766Z,1516915598.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:39.191Z,1516915599.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:39.546Z,1516915599.546 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:26:39.548Z,1516915599.548 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:39.568Z,1516915599.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:39.978Z,1516915599.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:40.147Z,1516915600.147 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:26:40.148Z,1516915600.148 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:40.369Z,1516915600.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:40.771Z,1516915600.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:41.203Z,1516915601.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:41.346Z,1516915601.346 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:26:41.347Z,1516915601.347 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:41.586Z,1516915601.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:41.978Z,1516915601.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:42.369Z,1516915602.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:42.548Z,1516915602.548 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:26:42.550Z,1516915602.550 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:42.774Z,1516915602.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:43.180Z,1516915603.180 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:26:43.182Z,1516915603.182 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:43.207Z,1516915603.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:43.578Z,1516915603.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:43.982Z,1516915603.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:44.382Z,1516915604.382 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:26:44.383Z,1516915604.383 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:44.401Z,1516915604.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:44.768Z,1516915604.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:45.164Z,1516915605.164 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:26:45.165Z,1516915605.165 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:45.187Z,1516915605.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:45.577Z,1516915605.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:45.975Z,1516915605.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:46.366Z,1516915606.366 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:26:46.367Z,1516915606.367 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:46.391Z,1516915606.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:46.787Z,1516915606.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:47.158Z,1516915607.158 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:26:47.159Z,1516915607.159 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:47.219Z,1516915607.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:47.596Z,1516915607.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:47.964Z,1516915607.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:48.358Z,1516915608.358 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:26:48.359Z,1516915608.359 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:48.371Z,1516915608.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:48.769Z,1516915608.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:49.198Z,1516915609.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:49.558Z,1516915609.558 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:26:49.559Z,1516915609.559 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:49.599Z,1516915609.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:49.976Z,1516915609.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:50.162Z,1516915610.162 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:26:50.164Z,1516915610.164 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:50.372Z,1516915610.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:50.768Z,1516915610.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:51.184Z,1516915611.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:51.362Z,1516915611.362 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:26:51.363Z,1516915611.363 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:51.574Z,1516915611.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:51.972Z,1516915611.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:52.374Z,1516915612.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:52.562Z,1516915612.562 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:26:52.563Z,1516915612.563 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:52.783Z,1516915612.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:53.179Z,1516915613.179 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:26:53.181Z,1516915613.181 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:53.209Z,1516915613.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:53.588Z,1516915613.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:53.968Z,1516915613.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:54.368Z,1516915614.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:54.382Z,1516915614.382 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:26:54.384Z,1516915614.384 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:54.777Z,1516915614.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:55.171Z,1516915615.171 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:26:55.172Z,1516915615.172 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:55.192Z,1516915615.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:55.580Z,1516915615.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:55.987Z,1516915615.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:56.370Z,1516915616.370 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:26:56.371Z,1516915616.371 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:56.388Z,1516915616.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:56.766Z,1516915616.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:57.191Z,1516915617.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:57.570Z,1516915617.570 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:26:57.572Z,1516915617.572 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:57.574Z,1516915617.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:57.975Z,1516915617.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:58.175Z,1516915618.175 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:26:58.176Z,1516915618.176 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:58.374Z,1516915618.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:58.772Z,1516915618.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:59.193Z,1516915619.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:59.374Z,1516915619.374 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:26:59.375Z,1516915619.375 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:26:59.595Z,1516915619.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:26:59.970Z,1516915619.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:00.367Z,1516915620.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:00.574Z,1516915620.574 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:27:00.575Z,1516915620.575 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:00.774Z,1516915620.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:01.179Z,1516915621.179 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:27:01.182Z,1516915621.182 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:01.204Z,1516915621.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:01.578Z,1516915621.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:01.983Z,1516915621.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:02.378Z,1516915622.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:02.382Z,1516915622.382 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:27:02.384Z,1516915622.384 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:02.772Z,1516915622.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:03.206Z,1516915623.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:03.570Z,1516915623.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:03.583Z,1516915623.583 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:27:03.584Z,1516915623.584 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:03.971Z,1516915623.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:04.212Z,1516915624.212 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:27:04.213Z,1516915624.213 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:04.383Z,1516915624.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:04.780Z,1516915624.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:05.205Z,1516915625.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:05.415Z,1516915625.415 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:27:05.417Z,1516915625.417 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:05.602Z,1516915625.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:05.983Z,1516915625.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:06.187Z,1516915626.187 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:27:06.188Z,1516915626.188 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:06.365Z,1516915626.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:06.770Z,1516915626.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:07.192Z,1516915627.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:07.390Z,1516915627.390 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:27:07.391Z,1516915627.391 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:07.576Z,1516915627.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:07.997Z,1516915627.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:08.372Z,1516915628.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:08.590Z,1516915628.590 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:27:08.591Z,1516915628.591 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:08.770Z,1516915628.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:09.192Z,1516915629.192 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:27:09.193Z,1516915629.193 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:09.196Z,1516915629.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:09.568Z,1516915629.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:09.973Z,1516915629.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:10.374Z,1516915630.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:10.394Z,1516915630.394 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:27:10.395Z,1516915630.395 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:10.779Z,1516915630.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:11.217Z,1516915631.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:11.586Z,1516915631.586 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:11.586Z,1516915631.586 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2018-01-25T21:27:11.586Z,1516915631.586 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-25T21:27:11.588Z,1516915631.588 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:11.588Z,1516915631.588 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2018-01-25T21:27:11.588Z,1516915631.588 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-25T21:27:11.590Z,1516915631.590 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:11.590Z,1516915631.590 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-01-25T21:27:11.590Z,1516915631.590 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-25T21:27:11.594Z,1516915631.594 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:27:11.595Z,1516915631.595 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:11.606Z,1516915631.606 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-25T21:27:11.606Z,1516915631.606 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-25T21:27:11.606Z,1516915631.606 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-25T21:27:11.991Z,1516915631.991 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-25T21:27:11.991Z,1516915631.991 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2018-01-25T21:27:11.992Z,1516915631.992 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-25T21:27:11.992Z,1516915631.992 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2018-01-25T21:27:11.992Z,1516915631.992 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-25T21:27:11.992Z,1516915631.992 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-01-25T21:27:12.196Z,1516915632.196 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:27:12.198Z,1516915632.198 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:12.378Z,1516915632.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-25T21:27:12.379Z,1516915632.379 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T21:27:12.379Z,1516915632.379 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T21:27:12.379Z,1516915632.379 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-25T21:27:12.380Z,1516915632.380 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T21:27:12.380Z,1516915632.380 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T21:27:12.381Z,1516915632.381 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-25T21:27:12.382Z,1516915632.382 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T21:27:12.382Z,1516915632.382 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T21:27:12.783Z,1516915632.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-25T21:27:12.784Z,1516915632.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:13.160Z,1516915633.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-25T21:27:13.161Z,1516915633.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:13.398Z,1516915633.398 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:27:13.399Z,1516915633.399 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:13.598Z,1516915633.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-25T21:27:13.599Z,1516915633.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:13.990Z,1516915633.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-25T21:27:13.991Z,1516915633.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:14.371Z,1516915634.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-25T21:27:14.372Z,1516915634.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:14.598Z,1516915634.598 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:27:14.599Z,1516915634.599 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:14.766Z,1516915634.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-25T21:27:14.767Z,1516915634.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:15.168Z,1516915635.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-25T21:27:15.169Z,1516915635.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:15.207Z,1516915635.207 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:27:15.208Z,1516915635.208 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:15.571Z,1516915635.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-25T21:27:15.573Z,1516915635.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:15.963Z,1516915635.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-25T21:27:15.969Z,1516915635.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:16.367Z,1516915636.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-25T21:27:16.368Z,1516915636.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:16.406Z,1516915636.406 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:27:16.407Z,1516915636.407 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:16.782Z,1516915636.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-25T21:27:16.783Z,1516915636.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:17.195Z,1516915637.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-25T21:27:17.209Z,1516915637.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:17.578Z,1516915637.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-25T21:27:17.579Z,1516915637.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:17.606Z,1516915637.606 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:27:17.607Z,1516915637.607 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:17.968Z,1516915637.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-25T21:27:17.969Z,1516915637.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:18.206Z,1516915638.206 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:27:18.207Z,1516915638.207 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:18.372Z,1516915638.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-25T21:27:18.373Z,1516915638.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:18.777Z,1516915638.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-25T21:27:18.778Z,1516915638.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:19.169Z,1516915639.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-25T21:27:19.170Z,1516915639.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:19.407Z,1516915639.407 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:27:19.409Z,1516915639.409 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:19.587Z,1516915639.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-25T21:27:19.587Z,1516915639.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:20.610Z,1516915640.610 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:27:20.611Z,1516915640.611 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:21.210Z,1516915641.210 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:27:21.212Z,1516915641.212 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:22.410Z,1516915642.410 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:27:22.411Z,1516915642.411 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:22.841Z,1516915642.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-01-25T21:27:22.842Z,1516915642.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:22.970Z,1516915642.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.4 s old, using for 20.0 s.
2018-01-25T21:27:22.971Z,1516915642.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:23.331Z,1516915643.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-01-25T21:27:23.336Z,1516915643.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:23.610Z,1516915643.610 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:27:23.611Z,1516915643.611 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:23.738Z,1516915643.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.2 s old, using for 20.0 s.
2018-01-25T21:27:23.738Z,1516915643.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:24.136Z,1516915644.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.6 s old, using for 20.0 s.
2018-01-25T21:27:24.137Z,1516915644.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:24.217Z,1516915644.217 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:27:24.218Z,1516915644.218 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:24.544Z,1516915644.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.0 s old, using for 20.0 s.
2018-01-25T21:27:24.545Z,1516915644.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:24.954Z,1516915644.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.4 s old, using for 20.0 s.
2018-01-25T21:27:24.955Z,1516915644.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:25.343Z,1516915645.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.8 s old, using for 20.0 s.
2018-01-25T21:27:25.344Z,1516915645.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:25.418Z,1516915645.418 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:27:25.419Z,1516915645.419 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:25.734Z,1516915645.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-01-25T21:27:25.735Z,1516915645.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:26.138Z,1516915646.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s.
2018-01-25T21:27:26.139Z,1516915646.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:26.537Z,1516915646.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s.
2018-01-25T21:27:26.538Z,1516915646.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:26.618Z,1516915646.618 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:27:26.619Z,1516915646.619 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:26.937Z,1516915646.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2018-01-25T21:27:26.938Z,1516915646.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:27.220Z,1516915647.220 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:27:27.222Z,1516915647.222 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:27.349Z,1516915647.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2018-01-25T21:27:27.350Z,1516915647.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:27.741Z,1516915647.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2018-01-25T21:27:27.742Z,1516915647.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:28.156Z,1516915648.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2018-01-25T21:27:28.157Z,1516915648.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:28.422Z,1516915648.422 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:27:28.423Z,1516915648.423 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:28.554Z,1516915648.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2018-01-25T21:27:28.555Z,1516915648.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:28.946Z,1516915648.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2018-01-25T21:27:28.947Z,1516915648.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:29.328Z,1516915649.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-01-25T21:27:29.329Z,1516915649.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:29.622Z,1516915649.622 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:27:29.623Z,1516915649.623 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:29.735Z,1516915649.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-01-25T21:27:29.736Z,1516915649.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:30.127Z,1516915650.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-01-25T21:27:30.128Z,1516915650.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:30.224Z,1516915650.224 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:27:30.225Z,1516915650.225 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:30.552Z,1516915650.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2018-01-25T21:27:30.554Z,1516915650.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:30.954Z,1516915650.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2018-01-25T21:27:30.955Z,1516915650.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:31.354Z,1516915651.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2018-01-25T21:27:31.354Z,1516915651.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:31.426Z,1516915651.426 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:27:31.427Z,1516915651.427 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:31.724Z,1516915651.724 [PNI_TCM](ERROR): CRC does not match. Expected:0x62006 got:0x17072
2018-01-25T21:27:31.758Z,1516915651.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:32.126Z,1516915652.126 [PNI_TCM](ERROR): CRC does not match. Expected:0x64954 got:0x32775
2018-01-25T21:27:32.154Z,1516915652.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:32.537Z,1516915652.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:32.549Z,1516915652.549 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-25T21:22:32.3Z
2018-01-25T21:27:32.549Z,1516915652.549 [Default:CheckIn:Read_GPS] Stopped
2018-01-25T21:27:32.549Z,1516915652.549 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-25T21:27:32.626Z,1516915652.626 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:27:32.627Z,1516915652.627 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:32.951Z,1516915652.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:32.954Z,1516915652.954 [Default:CheckIn:Read_Iridium](DEBUG): Initialize ReadDataComponent to sense platform_communications
2018-01-25T21:27:33.229Z,1516915653.229 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:27:33.230Z,1516915653.230 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:33.484Z,1516915653.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:33.737Z,1516915653.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:34.430Z,1516915654.430 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:27:34.431Z,1516915654.431 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:35.630Z,1516915655.630 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:27:35.631Z,1516915655.631 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:36.234Z,1516915656.234 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:27:36.235Z,1516915656.235 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:37.034Z,1516915657.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:37.109Z,1516915657.109 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180125T211802/Courier0004.lzma
2018-01-25T21:27:37.186Z,1516915657.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:37.434Z,1516915657.434 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:27:37.435Z,1516915657.435 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:37.528Z,1516915657.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:37.887Z,1516915657.887 [DataOverHttps](INFO): Moved sent file to Logs/20180125T211802/Courier0004.lzma.bak
2018-01-25T21:27:37.887Z,1516915657.887 [DataOverHttps](INFO): SBD MOMSN=7761234
2018-01-25T21:27:37.928Z,1516915657.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:38.622Z,1516915658.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:38.635Z,1516915658.635 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:27:38.636Z,1516915658.636 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:38.763Z,1516915658.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:39.238Z,1516915659.238 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:27:39.239Z,1516915659.239 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:40.438Z,1516915660.438 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:27:40.439Z,1516915660.439 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:41.638Z,1516915661.638 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:27:41.639Z,1516915661.639 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:42.008Z,1516915662.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:42.148Z,1516915662.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:42.243Z,1516915662.243 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:27:42.244Z,1516915662.244 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:42.506Z,1516915662.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:42.903Z,1516915662.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:43.289Z,1516915663.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:43.446Z,1516915663.446 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:27:43.447Z,1516915663.447 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:43.710Z,1516915663.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:44.646Z,1516915664.646 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:27:44.647Z,1516915664.647 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:45.247Z,1516915665.247 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:27:45.249Z,1516915665.249 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:46.450Z,1516915666.450 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:27:46.451Z,1516915666.451 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:46.961Z,1516915666.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:47.041Z,1516915667.041 [DataOverHttps](INFO): Sending 163 bytes from file Logs/20180125T211210/Express0005.lzma
2018-01-25T21:27:47.114Z,1516915667.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:47.449Z,1516915667.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:47.650Z,1516915667.650 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:27:47.651Z,1516915667.651 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:47.815Z,1516915667.815 [DataOverHttps](INFO): Moved sent file to Logs/20180125T211210/Express0005.lzma.bak
2018-01-25T21:27:47.815Z,1516915667.815 [DataOverHttps](INFO): SBD MOMSN=7761237
2018-01-25T21:27:47.870Z,1516915667.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:48.252Z,1516915668.252 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:27:48.253Z,1516915668.253 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:48.596Z,1516915668.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:48.742Z,1516915668.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:49.454Z,1516915669.454 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:27:49.455Z,1516915669.455 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:50.654Z,1516915670.654 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:27:50.655Z,1516915670.655 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:51.257Z,1516915671.257 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:27:51.258Z,1516915671.258 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:51.928Z,1516915671.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:52.074Z,1516915672.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:52.418Z,1516915672.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:52.458Z,1516915672.458 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:27:52.459Z,1516915672.459 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:52.830Z,1516915672.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:53.238Z,1516915673.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:53.631Z,1516915673.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:53.658Z,1516915673.658 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:27:53.659Z,1516915673.659 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:54.261Z,1516915674.261 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:27:54.263Z,1516915674.263 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:55.462Z,1516915675.462 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:27:55.463Z,1516915675.463 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:56.662Z,1516915676.662 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:27:56.663Z,1516915676.663 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:56.886Z,1516915676.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:56.968Z,1516915676.968 [DataOverHttps](INFO): Sending 474 bytes from file Logs/20180125T211535/Express0001.lzma
2018-01-25T21:27:57.038Z,1516915677.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:57.266Z,1516915677.266 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:27:57.267Z,1516915677.267 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:57.374Z,1516915677.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:57.707Z,1516915677.707 [DataOverHttps](INFO): Moved sent file to Logs/20180125T211535/Express0001.lzma.bak
2018-01-25T21:27:57.707Z,1516915677.707 [DataOverHttps](INFO): SBD MOMSN=7761242
2018-01-25T21:27:57.759Z,1516915677.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:58.466Z,1516915678.466 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:27:58.468Z,1516915678.468 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:27:58.507Z,1516915678.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:58.642Z,1516915678.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:27:59.666Z,1516915679.666 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:27:59.667Z,1516915679.667 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:00.272Z,1516915680.272 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:00.274Z,1516915680.274 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:01.474Z,1516915681.474 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:01.475Z,1516915681.475 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:01.888Z,1516915681.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:02.027Z,1516915682.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:02.348Z,1516915682.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:02.674Z,1516915682.674 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:02.675Z,1516915682.675 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:02.782Z,1516915682.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:03.150Z,1516915683.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:03.275Z,1516915683.275 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:28:03.276Z,1516915683.276 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:03.566Z,1516915683.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:04.478Z,1516915684.478 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:04.479Z,1516915684.479 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:05.678Z,1516915685.678 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:28:05.679Z,1516915685.679 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:06.280Z,1516915686.280 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:06.281Z,1516915686.281 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:06.836Z,1516915686.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:06.926Z,1516915686.926 [DataOverHttps](INFO): Sending 619 bytes from file Logs/20180125T211802/Express0001.lzma
2018-01-25T21:28:06.999Z,1516915686.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:07.318Z,1516915687.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:07.482Z,1516915687.482 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:28:07.483Z,1516915687.483 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:07.663Z,1516915687.663 [DataOverHttps](INFO): Moved sent file to Logs/20180125T211802/Express0001.lzma.bak
2018-01-25T21:28:07.663Z,1516915687.663 [DataOverHttps](INFO): SBD MOMSN=7761255
2018-01-25T21:28:07.718Z,1516915687.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:08.420Z,1516915688.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:08.554Z,1516915688.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:08.682Z,1516915688.682 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:08.683Z,1516915688.683 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:09.284Z,1516915689.284 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:09.286Z,1516915689.286 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:10.486Z,1516915690.486 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:10.487Z,1516915690.487 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:11.686Z,1516915691.686 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:11.687Z,1516915691.687 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:11.810Z,1516915691.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:11.823Z,1516915691.823 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-25T21:28:11.954Z,1516915691.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:12.304Z,1516915692.304 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:12.305Z,1516915692.305 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:12.313Z,1516915692.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:12.677Z,1516915692.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:13.079Z,1516915693.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:13.477Z,1516915693.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:13.506Z,1516915693.506 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:13.507Z,1516915693.507 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:14.292Z,1516915694.292 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:14.294Z,1516915694.294 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:15.494Z,1516915695.494 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:15.496Z,1516915695.496 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:16.694Z,1516915696.694 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:16.696Z,1516915696.696 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:16.975Z,1516915696.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:17.053Z,1516915697.053 [DataOverHttps](INFO): Sending 371 bytes from file Logs/20180125T211802/Express0005.lzma
2018-01-25T21:28:17.115Z,1516915697.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:17.297Z,1516915697.297 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:28:17.298Z,1516915697.298 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:17.460Z,1516915697.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:18.498Z,1516915698.498 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:18.499Z,1516915698.499 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:19.698Z,1516915699.698 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:28:19.700Z,1516915699.700 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:20.301Z,1516915700.301 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:20.303Z,1516915700.303 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:21.505Z,1516915701.505 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:28:21.507Z,1516915701.507 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:22.601Z,1516915702.601 [DataOverHttps](INFO): Moved sent file to Logs/20180125T211802/Express0005.lzma.bak
2018-01-25T21:28:22.602Z,1516915702.602 [DataOverHttps](INFO): SBD MOMSN=7761266
2018-01-25T21:28:22.629Z,1516915702.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:28:22.671Z,1516915702.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:22.706Z,1516915702.706 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:22.708Z,1516915702.708 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:23.091Z,1516915703.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:28:23.111Z,1516915703.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:23.114Z,1516915703.114 [Default:CheckIn:Read_Iridium] Stopped
2018-01-25T21:28:23.114Z,1516915703.114 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-25T21:28:23.114Z,1516915703.114 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-25T21:28:23.214Z,1516915703.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:28:23.246Z,1516915703.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:23.306Z,1516915703.306 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:23.307Z,1516915703.307 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:24.506Z,1516915704.506 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:24.507Z,1516915704.507 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:25.706Z,1516915705.706 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:25.707Z,1516915705.707 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:26.312Z,1516915706.312 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:28:26.314Z,1516915706.314 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:26.582Z,1516915706.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:28:26.603Z,1516915706.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:26.702Z,1516915706.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:28:26.726Z,1516915706.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:27.083Z,1516915707.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:28:27.102Z,1516915707.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:27.483Z,1516915707.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:28:27.502Z,1516915707.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:27.522Z,1516915707.522 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:27.523Z,1516915707.523 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:27.878Z,1516915707.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:28:27.900Z,1516915707.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:28.281Z,1516915708.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:28:28.314Z,1516915708.314 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:28.316Z,1516915708.316 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:28.320Z,1516915708.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:28.706Z,1516915708.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:29.107Z,1516915709.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:29.505Z,1516915709.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:29.514Z,1516915709.514 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:29.515Z,1516915709.515 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:29.907Z,1516915709.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:30.296Z,1516915710.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:30.709Z,1516915710.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:30.714Z,1516915710.714 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:30.716Z,1516915710.716 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:31.107Z,1516915711.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:31.319Z,1516915711.319 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:31.320Z,1516915711.320 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:31.500Z,1516915711.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:31.907Z,1516915711.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:32.324Z,1516915712.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:32.518Z,1516915712.518 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:32.519Z,1516915712.519 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:32.707Z,1516915712.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:33.096Z,1516915713.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:33.498Z,1516915713.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:33.718Z,1516915713.718 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:33.719Z,1516915713.719 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:33.897Z,1516915713.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:34.308Z,1516915714.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:34.323Z,1516915714.323 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:34.325Z,1516915714.325 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:34.714Z,1516915714.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:35.110Z,1516915715.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:35.507Z,1516915715.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:35.526Z,1516915715.526 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:35.527Z,1516915715.527 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:35.908Z,1516915715.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:36.328Z,1516915716.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:36.702Z,1516915716.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:36.726Z,1516915716.726 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:36.727Z,1516915716.727 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:37.108Z,1516915717.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:37.327Z,1516915717.327 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:37.329Z,1516915717.329 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:37.500Z,1516915717.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:37.911Z,1516915717.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:38.333Z,1516915718.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:38.530Z,1516915718.530 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:38.531Z,1516915718.531 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:38.711Z,1516915718.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:39.106Z,1516915719.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:39.508Z,1516915719.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:39.730Z,1516915719.730 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:39.731Z,1516915719.731 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:39.907Z,1516915719.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:40.322Z,1516915720.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:40.332Z,1516915720.332 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:40.334Z,1516915720.334 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:40.717Z,1516915720.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:41.113Z,1516915721.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:41.507Z,1516915721.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:41.534Z,1516915721.534 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:41.535Z,1516915721.535 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:41.915Z,1516915721.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:42.331Z,1516915722.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:42.694Z,1516915722.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:42.734Z,1516915722.734 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:42.735Z,1516915722.735 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:43.094Z,1516915723.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:43.337Z,1516915723.337 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:43.338Z,1516915723.338 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:43.500Z,1516915723.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:43.924Z,1516915723.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:44.339Z,1516915724.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:44.538Z,1516915724.538 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:44.539Z,1516915724.539 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:44.704Z,1516915724.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:45.099Z,1516915725.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:45.502Z,1516915725.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:45.738Z,1516915725.738 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:45.739Z,1516915725.739 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:45.900Z,1516915725.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:46.298Z,1516915726.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:46.342Z,1516915726.342 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:46.343Z,1516915726.343 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:46.718Z,1516915726.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:47.109Z,1516915727.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:47.506Z,1516915727.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:47.542Z,1516915727.542 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:47.543Z,1516915727.543 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:47.911Z,1516915727.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:48.301Z,1516915728.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:48.703Z,1516915728.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:48.742Z,1516915728.742 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:48.743Z,1516915728.743 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:49.108Z,1516915729.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:49.347Z,1516915729.347 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:49.349Z,1516915729.349 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:49.502Z,1516915729.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:49.914Z,1516915729.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:50.314Z,1516915730.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:50.550Z,1516915730.550 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:50.551Z,1516915730.551 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:50.711Z,1516915730.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:51.102Z,1516915731.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:51.506Z,1516915731.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:51.750Z,1516915731.750 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:28:51.751Z,1516915731.751 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:51.901Z,1516915731.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:52.303Z,1516915732.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:52.356Z,1516915732.356 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:52.358Z,1516915732.358 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:52.662Z,1516915732.662 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-25T21:28:52.662Z,1516915732.662 [NAL9602] Data Fault, FailCount= 1
2018-01-25T21:28:52.662Z,1516915732.662 [NAL9602](ERROR): Data Fault
2018-01-25T21:28:52.720Z,1516915732.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:52.732Z,1516915732.732 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-25T21:28:53.070Z,1516915733.070 [NAL9602](INFO): Powering down
2018-01-25T21:28:53.116Z,1516915733.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:53.510Z,1516915733.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:53.558Z,1516915733.558 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:53.559Z,1516915733.559 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:53.894Z,1516915733.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:53.931Z,1516915733.931 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-25T21:28:53.931Z,1516915733.931 [NAL9602] No Fault, FailCount= 1
2018-01-25T21:28:54.294Z,1516915734.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:54.720Z,1516915734.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:54.758Z,1516915734.758 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:54.759Z,1516915734.759 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:55.107Z,1516915735.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:55.357Z,1516915735.357 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:55.358Z,1516915735.358 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:55.500Z,1516915735.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:55.901Z,1516915735.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:56.308Z,1516915736.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:56.558Z,1516915736.558 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:56.559Z,1516915736.559 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:56.700Z,1516915736.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:57.099Z,1516915737.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:57.499Z,1516915737.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:57.758Z,1516915737.758 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:57.759Z,1516915737.759 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:57.901Z,1516915737.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:58.303Z,1516915738.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:58.360Z,1516915738.360 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:58.361Z,1516915738.361 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:58.696Z,1516915738.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:59.096Z,1516915739.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:59.510Z,1516915739.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:28:59.562Z,1516915739.562 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:28:59.563Z,1516915739.563 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:28:59.904Z,1516915739.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:00.300Z,1516915740.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:00.707Z,1516915740.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:00.762Z,1516915740.762 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:29:00.763Z,1516915740.763 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:01.110Z,1516915741.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:01.365Z,1516915741.365 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:01.366Z,1516915741.366 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:01.503Z,1516915741.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:01.904Z,1516915741.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:02.307Z,1516915742.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:02.566Z,1516915742.566 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:29:02.567Z,1516915742.567 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:02.726Z,1516915742.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:03.118Z,1516915743.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:03.499Z,1516915743.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:03.766Z,1516915743.766 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:03.767Z,1516915743.767 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:03.893Z,1516915743.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:04.378Z,1516915744.378 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:04.379Z,1516915744.379 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:04.383Z,1516915744.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:04.699Z,1516915744.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:05.099Z,1516915745.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:05.495Z,1516915745.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:05.578Z,1516915745.578 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:05.579Z,1516915745.579 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:05.904Z,1516915745.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:06.310Z,1516915746.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:06.373Z,1516915746.373 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:06.374Z,1516915746.374 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:06.707Z,1516915746.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:07.106Z,1516915747.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:07.496Z,1516915747.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:07.574Z,1516915747.574 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:07.575Z,1516915747.575 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:07.918Z,1516915747.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:08.322Z,1516915748.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:08.692Z,1516915748.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:08.774Z,1516915748.774 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:08.775Z,1516915748.775 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:09.099Z,1516915749.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:09.377Z,1516915749.377 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:09.378Z,1516915749.378 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:09.496Z,1516915749.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:09.897Z,1516915749.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:10.300Z,1516915750.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:10.578Z,1516915750.578 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:10.579Z,1516915750.579 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:10.707Z,1516915750.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:11.100Z,1516915751.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:11.498Z,1516915751.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:11.778Z,1516915751.778 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:11.779Z,1516915751.779 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:11.899Z,1516915751.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:12.304Z,1516915752.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:12.410Z,1516915752.410 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:12.411Z,1516915752.411 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:12.714Z,1516915752.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:13.100Z,1516915753.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:13.502Z,1516915753.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:13.610Z,1516915753.610 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:13.611Z,1516915753.611 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:13.907Z,1516915753.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:14.299Z,1516915754.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:14.385Z,1516915754.385 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:14.386Z,1516915754.386 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:14.699Z,1516915754.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:15.110Z,1516915755.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:15.514Z,1516915755.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:15.586Z,1516915755.586 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:15.587Z,1516915755.587 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:15.896Z,1516915755.896 [PNI_TCM](ERROR): CRC does not match. Expected:0x43041 got:0x104
2018-01-25T21:29:15.922Z,1516915755.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:16.310Z,1516915756.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:16.706Z,1516915756.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:16.786Z,1516915756.786 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:16.787Z,1516915756.787 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:17.114Z,1516915757.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:17.389Z,1516915757.389 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:17.391Z,1516915757.391 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:17.508Z,1516915757.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:17.906Z,1516915757.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:18.299Z,1516915758.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:18.590Z,1516915758.590 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:18.591Z,1516915758.591 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:18.714Z,1516915758.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:19.106Z,1516915759.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:19.505Z,1516915759.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:19.790Z,1516915759.790 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:19.791Z,1516915759.791 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:19.911Z,1516915759.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:20.310Z,1516915760.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:20.394Z,1516915760.394 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:20.395Z,1516915760.395 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:20.703Z,1516915760.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:21.104Z,1516915761.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:21.499Z,1516915761.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:21.594Z,1516915761.594 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:21.595Z,1516915761.595 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:21.914Z,1516915761.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:22.303Z,1516915762.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:22.702Z,1516915762.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:22.794Z,1516915762.794 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:22.795Z,1516915762.795 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:23.100Z,1516915763.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:23.399Z,1516915763.399 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:23.400Z,1516915763.400 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:23.463Z,1516915763.463 [NAL9602](INFO): Powering up NAL9602
2018-01-25T21:29:23.518Z,1516915763.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:23.906Z,1516915763.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:24.598Z,1516915764.598 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:24.599Z,1516915764.599 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:25.798Z,1516915765.798 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:25.799Z,1516915765.799 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:26.403Z,1516915766.403 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:26.405Z,1516915766.405 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:27.185Z,1516915767.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:27.323Z,1516915767.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:27.606Z,1516915767.606 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:27.607Z,1516915767.607 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:27.667Z,1516915767.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:28.057Z,1516915768.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:28.451Z,1516915768.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:28.806Z,1516915768.806 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:28.807Z,1516915768.807 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:28.873Z,1516915768.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:29.252Z,1516915769.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:29.408Z,1516915769.408 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:29.409Z,1516915769.409 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:29.648Z,1516915769.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:30.052Z,1516915770.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:30.450Z,1516915770.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:30.610Z,1516915770.610 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:30.611Z,1516915770.611 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:30.855Z,1516915770.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:31.255Z,1516915771.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:31.655Z,1516915771.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:31.810Z,1516915771.810 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:31.811Z,1516915771.811 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:32.055Z,1516915772.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:32.413Z,1516915772.413 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:32.414Z,1516915772.414 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:32.464Z,1516915772.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:32.861Z,1516915772.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:33.236Z,1516915773.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:33.615Z,1516915773.615 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:33.616Z,1516915773.616 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:33.639Z,1516915773.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:34.048Z,1516915774.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:34.406Z,1516915774.406 [NAL9602](INFO): NAL9602 initialized
2018-01-25T21:29:34.469Z,1516915774.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:34.820Z,1516915774.820 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:34.822Z,1516915774.822 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:34.847Z,1516915774.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:35.259Z,1516915775.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:35.418Z,1516915775.418 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:35.420Z,1516915775.420 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:35.651Z,1516915775.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:36.058Z,1516915776.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:36.462Z,1516915776.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:36.619Z,1516915776.619 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:36.621Z,1516915776.621 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:36.850Z,1516915776.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:37.247Z,1516915777.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:37.652Z,1516915777.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:37.822Z,1516915777.822 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:37.823Z,1516915777.823 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:38.050Z,1516915778.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:38.422Z,1516915778.422 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:38.423Z,1516915778.423 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:38.480Z,1516915778.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:38.873Z,1516915778.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:39.254Z,1516915779.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:39.623Z,1516915779.623 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:39.625Z,1516915779.625 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:39.662Z,1516915779.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:40.056Z,1516915780.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:40.460Z,1516915780.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:40.826Z,1516915780.826 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:40.827Z,1516915780.827 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:40.862Z,1516915780.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:41.261Z,1516915781.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:41.426Z,1516915781.426 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:41.428Z,1516915781.428 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:41.671Z,1516915781.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:42.051Z,1516915782.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:42.478Z,1516915782.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:42.626Z,1516915782.626 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:42.627Z,1516915782.627 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:42.850Z,1516915782.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:43.253Z,1516915783.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:43.654Z,1516915783.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:43.827Z,1516915783.827 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:43.829Z,1516915783.829 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:44.075Z,1516915784.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:44.463Z,1516915784.463 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:44.464Z,1516915784.464 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:44.498Z,1516915784.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:44.854Z,1516915784.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:29:44.878Z,1516915784.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:45.240Z,1516915785.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:29:45.277Z,1516915785.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:45.629Z,1516915785.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:29:45.647Z,1516915785.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:45.662Z,1516915785.662 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:45.663Z,1516915785.663 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:46.032Z,1516915786.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:29:46.054Z,1516915786.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:46.436Z,1516915786.436 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:46.438Z,1516915786.438 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:46.444Z,1516915786.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:29:46.490Z,1516915786.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:46.845Z,1516915786.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:29:46.873Z,1516915786.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:47.235Z,1516915787.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:29:47.249Z,1516915787.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:47.638Z,1516915787.638 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:47.640Z,1516915787.640 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:47.655Z,1516915787.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:29:47.702Z,1516915787.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:48.057Z,1516915788.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:29:48.094Z,1516915788.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:48.452Z,1516915788.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:29:48.501Z,1516915788.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:48.836Z,1516915788.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:29:48.838Z,1516915788.838 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:48.840Z,1516915788.840 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:48.874Z,1516915788.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:49.229Z,1516915789.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:29:49.266Z,1516915789.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:49.439Z,1516915789.439 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:49.440Z,1516915789.440 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:49.630Z,1516915789.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:29:49.682Z,1516915789.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:50.028Z,1516915790.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:29:50.054Z,1516915790.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:50.472Z,1516915790.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:29:50.516Z,1516915790.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:50.642Z,1516915790.642 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:50.643Z,1516915790.643 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:50.850Z,1516915790.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:29:50.895Z,1516915790.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:51.257Z,1516915791.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:29:51.275Z,1516915791.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:51.630Z,1516915791.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:29:51.680Z,1516915791.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:51.842Z,1516915791.842 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:51.844Z,1516915791.844 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:52.028Z,1516915792.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:29:52.058Z,1516915792.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:52.438Z,1516915792.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:29:52.453Z,1516915792.453 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:52.454Z,1516915792.454 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:52.466Z,1516915792.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:52.829Z,1516915792.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:29:52.867Z,1516915792.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:53.236Z,1516915793.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:29:53.271Z,1516915793.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:53.644Z,1516915793.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:29:53.654Z,1516915793.654 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:53.655Z,1516915793.655 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:53.679Z,1516915793.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:54.038Z,1516915794.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:29:54.059Z,1516915794.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:54.446Z,1516915794.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:29:54.475Z,1516915794.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:54.828Z,1516915794.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:29:54.854Z,1516915794.854 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:54.855Z,1516915794.855 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:54.860Z,1516915794.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:55.224Z,1516915795.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:29:55.254Z,1516915795.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:55.476Z,1516915795.476 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:55.477Z,1516915795.477 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:55.624Z,1516915795.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:29:55.659Z,1516915795.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:56.023Z,1516915796.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:29:56.053Z,1516915796.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:56.444Z,1516915796.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:29:56.475Z,1516915796.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:56.678Z,1516915796.678 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:56.679Z,1516915796.679 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:56.845Z,1516915796.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:29:56.876Z,1516915796.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:57.234Z,1516915797.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:29:57.259Z,1516915797.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:57.451Z,1516915797.451 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:57.453Z,1516915797.453 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:57.627Z,1516915797.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:29:57.667Z,1516915797.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:58.037Z,1516915798.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:58.467Z,1516915798.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:58.654Z,1516915798.654 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:58.655Z,1516915798.655 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:29:58.846Z,1516915798.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:59.248Z,1516915799.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:59.655Z,1516915799.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:29:59.854Z,1516915799.854 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:29:59.855Z,1516915799.855 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:00.047Z,1516915800.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:00.456Z,1516915800.456 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:00.458Z,1516915800.458 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:00.487Z,1516915800.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:00.846Z,1516915800.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:01.247Z,1516915801.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:01.644Z,1516915801.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:01.670Z,1516915801.670 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:01.671Z,1516915801.671 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:02.043Z,1516915802.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:02.459Z,1516915802.459 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:02.460Z,1516915802.460 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:02.479Z,1516915802.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:02.856Z,1516915802.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:03.258Z,1516915803.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:03.646Z,1516915803.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:03.662Z,1516915803.662 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:03.663Z,1516915803.663 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:04.044Z,1516915804.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:04.467Z,1516915804.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:04.857Z,1516915804.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:04.862Z,1516915804.862 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:04.863Z,1516915804.863 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:05.256Z,1516915805.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:05.463Z,1516915805.463 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:05.465Z,1516915805.465 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:05.658Z,1516915805.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:06.058Z,1516915806.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:06.469Z,1516915806.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:06.666Z,1516915806.666 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:06.667Z,1516915806.667 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:06.858Z,1516915806.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:07.252Z,1516915807.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:07.647Z,1516915807.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:07.866Z,1516915807.866 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:07.867Z,1516915807.867 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:08.050Z,1516915808.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:08.468Z,1516915808.468 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:08.470Z,1516915808.470 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:08.484Z,1516915808.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:08.861Z,1516915808.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:09.254Z,1516915809.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:09.652Z,1516915809.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:09.670Z,1516915809.670 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:09.671Z,1516915809.671 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:10.050Z,1516915810.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:10.473Z,1516915810.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:10.856Z,1516915810.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:10.870Z,1516915810.870 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:10.871Z,1516915810.871 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:11.265Z,1516915811.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:11.473Z,1516915811.473 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:11.474Z,1516915811.474 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:11.661Z,1516915811.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:12.059Z,1516915812.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:12.478Z,1516915812.478 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:12.478Z,1516915812.478 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 4
2018-01-25T21:30:12.478Z,1516915812.478 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-25T21:30:12.480Z,1516915812.480 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:12.480Z,1516915812.480 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2018-01-25T21:30:12.480Z,1516915812.480 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-25T21:30:12.490Z,1516915812.490 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:12.490Z,1516915812.490 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-01-25T21:30:12.490Z,1516915812.490 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-25T21:30:12.518Z,1516915812.518 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-25T21:30:12.519Z,1516915812.519 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-25T21:30:12.519Z,1516915812.519 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-25T21:30:12.674Z,1516915812.674 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:12.675Z,1516915812.675 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:12.865Z,1516915812.865 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-25T21:30:12.865Z,1516915812.865 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 4
2018-01-25T21:30:12.865Z,1516915812.865 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-25T21:30:12.866Z,1516915812.866 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2018-01-25T21:30:12.866Z,1516915812.866 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-25T21:30:12.866Z,1516915812.866 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-01-25T21:30:13.255Z,1516915813.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-25T21:30:13.255Z,1516915813.255 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T21:30:13.255Z,1516915813.255 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T21:30:13.256Z,1516915813.256 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-25T21:30:13.256Z,1516915813.256 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T21:30:13.257Z,1516915813.257 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T21:30:13.257Z,1516915813.257 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-25T21:30:13.257Z,1516915813.257 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T21:30:13.258Z,1516915813.258 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T21:30:13.656Z,1516915813.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-25T21:30:13.657Z,1516915813.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:13.874Z,1516915813.874 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:13.875Z,1516915813.875 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:14.052Z,1516915814.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-25T21:30:14.053Z,1516915814.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:14.478Z,1516915814.478 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:14.479Z,1516915814.479 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:14.483Z,1516915814.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-25T21:30:14.484Z,1516915814.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:14.866Z,1516915814.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-25T21:30:14.866Z,1516915814.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:15.262Z,1516915815.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-25T21:30:15.263Z,1516915815.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:15.658Z,1516915815.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-25T21:30:15.659Z,1516915815.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:15.678Z,1516915815.678 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:15.679Z,1516915815.679 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:16.042Z,1516915816.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-25T21:30:16.043Z,1516915816.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:16.437Z,1516915816.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-25T21:30:16.438Z,1516915816.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:16.869Z,1516915816.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-25T21:30:16.870Z,1516915816.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:16.878Z,1516915816.878 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:16.879Z,1516915816.879 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:17.267Z,1516915817.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-25T21:30:17.268Z,1516915817.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:17.482Z,1516915817.482 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:17.483Z,1516915817.483 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:17.666Z,1516915817.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-25T21:30:17.667Z,1516915817.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:18.051Z,1516915818.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-25T21:30:18.052Z,1516915818.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:18.427Z,1516915818.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:18.444Z,1516915818.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-25T21:30:18.449Z,1516915818.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:18.682Z,1516915818.682 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:18.683Z,1516915818.683 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:18.830Z,1516915818.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:18.857Z,1516915818.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-25T21:30:18.858Z,1516915818.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:19.240Z,1516915819.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:19.258Z,1516915819.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-25T21:30:19.259Z,1516915819.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:19.638Z,1516915819.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:19.654Z,1516915819.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-25T21:30:19.655Z,1516915819.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:19.882Z,1516915819.882 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:19.883Z,1516915819.883 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:20.042Z,1516915820.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:20.062Z,1516915820.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-25T21:30:20.063Z,1516915820.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:20.427Z,1516915820.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:20.449Z,1516915820.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-25T21:30:20.450Z,1516915820.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:20.487Z,1516915820.487 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:20.488Z,1516915820.488 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:20.834Z,1516915820.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:20.847Z,1516915820.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-25T21:30:20.848Z,1516915820.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:21.240Z,1516915821.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:21.254Z,1516915821.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-25T21:30:21.255Z,1516915821.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:21.645Z,1516915821.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:21.658Z,1516915821.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-25T21:30:21.659Z,1516915821.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:21.686Z,1516915821.686 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:21.687Z,1516915821.687 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:22.038Z,1516915822.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:22.066Z,1516915822.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-25T21:30:22.067Z,1516915822.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:22.424Z,1516915822.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:22.452Z,1516915822.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-25T21:30:22.453Z,1516915822.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:22.827Z,1516915822.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:22.857Z,1516915822.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-25T21:30:22.858Z,1516915822.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:22.886Z,1516915822.886 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:22.887Z,1516915822.887 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:23.238Z,1516915823.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:23.258Z,1516915823.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-25T21:30:23.259Z,1516915823.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:23.491Z,1516915823.491 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:30:23.493Z,1516915823.493 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:23.648Z,1516915823.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:23.666Z,1516915823.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-25T21:30:23.667Z,1516915823.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:24.042Z,1516915824.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:24.062Z,1516915824.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-25T21:30:24.063Z,1516915824.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:24.694Z,1516915824.694 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010814 psu
2018-01-25T21:30:24.695Z,1516915824.695 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:25.894Z,1516915825.894 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:25.895Z,1516915825.895 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:26.496Z,1516915826.496 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:26.498Z,1516915826.498 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:27.371Z,1516915827.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:27.385Z,1516915827.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-01-25T21:30:27.386Z,1516915827.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:27.506Z,1516915827.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:27.538Z,1516915827.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s.
2018-01-25T21:30:27.539Z,1516915827.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:27.698Z,1516915827.698 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:27.699Z,1516915827.699 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:27.846Z,1516915827.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:27.859Z,1516915827.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2018-01-25T21:30:27.860Z,1516915827.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:28.242Z,1516915828.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:28.255Z,1516915828.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2018-01-25T21:30:28.256Z,1516915828.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:28.638Z,1516915828.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:28.652Z,1516915828.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2018-01-25T21:30:28.653Z,1516915828.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:28.898Z,1516915828.898 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:28.899Z,1516915828.899 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:29.031Z,1516915829.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:29.090Z,1516915829.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2018-01-25T21:30:29.090Z,1516915829.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:29.431Z,1516915829.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:29.450Z,1516915829.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2018-01-25T21:30:29.451Z,1516915829.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:29.501Z,1516915829.501 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:29.502Z,1516915829.502 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:29.831Z,1516915829.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:29.850Z,1516915829.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2018-01-25T21:30:29.851Z,1516915829.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:30.238Z,1516915830.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:30.251Z,1516915830.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2018-01-25T21:30:30.252Z,1516915830.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:30.642Z,1516915830.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:30.655Z,1516915830.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2018-01-25T21:30:30.656Z,1516915830.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:30.702Z,1516915830.702 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:30.703Z,1516915830.703 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:31.038Z,1516915831.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:31.051Z,1516915831.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2018-01-25T21:30:31.052Z,1516915831.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:31.432Z,1516915831.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:31.446Z,1516915831.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2018-01-25T21:30:31.447Z,1516915831.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:31.832Z,1516915831.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:31.850Z,1516915831.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2018-01-25T21:30:31.850Z,1516915831.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:31.902Z,1516915831.902 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:31.903Z,1516915831.903 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:32.242Z,1516915832.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:32.256Z,1516915832.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2018-01-25T21:30:32.257Z,1516915832.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:32.505Z,1516915832.505 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:32.507Z,1516915832.507 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:32.646Z,1516915832.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:32.659Z,1516915832.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:33.042Z,1516915833.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:33.056Z,1516915833.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:33.432Z,1516915833.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:33.450Z,1516915833.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:33.706Z,1516915833.706 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:33.707Z,1516915833.707 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:33.832Z,1516915833.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:33.858Z,1516915833.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:34.243Z,1516915834.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:34.266Z,1516915834.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:34.642Z,1516915834.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:34.666Z,1516915834.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:34.906Z,1516915834.906 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:34.907Z,1516915834.907 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:35.042Z,1516915835.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:35.056Z,1516915835.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:35.431Z,1516915835.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:35.462Z,1516915835.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:35.510Z,1516915835.510 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:35.511Z,1516915835.511 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:35.830Z,1516915835.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:35.852Z,1516915835.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:36.241Z,1516915836.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:36.263Z,1516915836.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:36.666Z,1516915836.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:36.710Z,1516915836.710 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:36.711Z,1516915836.711 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:37.059Z,1516915837.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:37.459Z,1516915837.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:37.861Z,1516915837.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:37.910Z,1516915837.910 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:37.911Z,1516915837.911 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:38.269Z,1516915838.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:38.543Z,1516915838.543 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:38.544Z,1516915838.544 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:38.666Z,1516915838.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:39.063Z,1516915839.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:39.454Z,1516915839.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:39.742Z,1516915839.742 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:39.743Z,1516915839.743 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:39.858Z,1516915839.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:40.270Z,1516915840.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:40.518Z,1516915840.518 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:40.519Z,1516915840.519 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:40.663Z,1516915840.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:41.063Z,1516915841.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:41.441Z,1516915841.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:41.718Z,1516915841.718 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:41.719Z,1516915841.719 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:41.854Z,1516915841.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:42.255Z,1516915842.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:42.659Z,1516915842.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:42.918Z,1516915842.918 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:42.919Z,1516915842.919 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:43.055Z,1516915843.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:43.450Z,1516915843.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:43.523Z,1516915843.523 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:43.524Z,1516915843.524 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:43.850Z,1516915843.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:44.258Z,1516915844.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:44.655Z,1516915844.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:44.722Z,1516915844.722 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:44.723Z,1516915844.723 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:45.042Z,1516915845.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:45.062Z,1516915845.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:45.430Z,1516915845.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:45.458Z,1516915845.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:45.834Z,1516915845.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:45.861Z,1516915845.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:45.923Z,1516915845.923 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:45.925Z,1516915845.925 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:46.238Z,1516915846.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:46.268Z,1516915846.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:46.527Z,1516915846.527 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:46.528Z,1516915846.528 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:46.643Z,1516915846.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:46.666Z,1516915846.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:47.047Z,1516915847.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:47.061Z,1516915847.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:47.444Z,1516915847.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:47.457Z,1516915847.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:47.731Z,1516915847.731 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:47.733Z,1516915847.733 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:47.846Z,1516915847.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:47.860Z,1516915847.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:48.242Z,1516915848.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:48.264Z,1516915848.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:48.646Z,1516915848.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:48.675Z,1516915848.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:48.935Z,1516915848.935 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:48.937Z,1516915848.937 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:49.045Z,1516915849.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:49.062Z,1516915849.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:49.428Z,1516915849.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:49.458Z,1516915849.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:49.532Z,1516915849.532 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:49.533Z,1516915849.533 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:49.841Z,1516915849.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:49.868Z,1516915849.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:50.239Z,1516915850.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:50.269Z,1516915850.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:50.643Z,1516915850.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:50.666Z,1516915850.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:50.734Z,1516915850.734 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:50.735Z,1516915850.735 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:51.078Z,1516915851.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:51.442Z,1516915851.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:51.846Z,1516915851.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:51.934Z,1516915851.934 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:51.936Z,1516915851.936 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:52.274Z,1516915852.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:52.536Z,1516915852.536 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:52.538Z,1516915852.538 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:52.667Z,1516915852.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:53.055Z,1516915853.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:53.449Z,1516915853.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:53.738Z,1516915853.738 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:30:53.739Z,1516915853.739 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:53.854Z,1516915853.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:54.255Z,1516915854.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:54.642Z,1516915854.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:54.656Z,1516915854.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:54.938Z,1516915854.938 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:30:54.939Z,1516915854.939 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:55.038Z,1516915855.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:55.052Z,1516915855.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:55.431Z,1516915855.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:55.457Z,1516915855.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:55.541Z,1516915855.541 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:30:55.542Z,1516915855.542 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:55.833Z,1516915855.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:55.851Z,1516915855.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:56.230Z,1516915856.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:56.258Z,1516915856.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:56.645Z,1516915856.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:56.659Z,1516915856.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:56.742Z,1516915856.742 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010813 psu
2018-01-25T21:30:56.743Z,1516915856.743 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:57.047Z,1516915857.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:57.070Z,1516915857.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:57.442Z,1516915857.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:57.466Z,1516915857.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:57.827Z,1516915857.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:57.851Z,1516915857.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:57.942Z,1516915857.942 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:30:57.943Z,1516915857.943 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:58.227Z,1516915858.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:58.268Z,1516915858.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:58.545Z,1516915858.545 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:30:58.547Z,1516915858.547 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:58.628Z,1516915858.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:58.662Z,1516915858.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:59.027Z,1516915859.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:59.058Z,1516915859.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:59.450Z,1516915859.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:59.463Z,1516915859.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:30:59.746Z,1516915859.746 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:30:59.747Z,1516915859.747 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:30:59.849Z,1516915859.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:30:59.863Z,1516915859.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:00.246Z,1516915860.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:31:00.265Z,1516915860.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:00.627Z,1516915860.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:31:00.654Z,1516915860.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:00.947Z,1516915860.947 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:00.949Z,1516915860.949 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:01.028Z,1516915861.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:31:01.046Z,1516915861.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:01.427Z,1516915861.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:31:01.446Z,1516915861.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:01.551Z,1516915861.551 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:01.553Z,1516915861.553 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:01.844Z,1516915861.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:31:01.878Z,1516915861.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:02.231Z,1516915862.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:31:02.245Z,1516915862.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:02.650Z,1516915862.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:31:02.680Z,1516915862.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:02.754Z,1516915862.754 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:02.755Z,1516915862.755 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:03.050Z,1516915863.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:31:03.064Z,1516915863.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:03.439Z,1516915863.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:31:03.453Z,1516915863.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:03.830Z,1516915863.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:31:03.858Z,1516915863.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:03.954Z,1516915863.954 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:03.955Z,1516915863.955 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:04.234Z,1516915864.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:31:04.247Z,1516915864.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:04.555Z,1516915864.555 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:04.556Z,1516915864.556 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:04.634Z,1516915864.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:31:04.648Z,1516915864.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:05.030Z,1516915865.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:31:05.057Z,1516915865.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:05.439Z,1516915865.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:31:05.458Z,1516915865.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:05.754Z,1516915865.754 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:05.755Z,1516915865.755 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:05.842Z,1516915865.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:31:05.856Z,1516915865.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:06.238Z,1516915866.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:31:06.258Z,1516915866.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:06.630Z,1516915866.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:31:06.652Z,1516915866.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:06.954Z,1516915866.954 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:06.955Z,1516915866.955 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:07.031Z,1516915867.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:31:07.056Z,1516915867.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:07.430Z,1516915867.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:31:07.456Z,1516915867.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:07.560Z,1516915867.560 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:07.561Z,1516915867.561 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:07.834Z,1516915867.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:31:07.856Z,1516915867.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:08.227Z,1516915868.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:31:08.256Z,1516915868.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:08.642Z,1516915868.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:31:08.660Z,1516915868.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:08.762Z,1516915868.762 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:08.763Z,1516915868.763 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:09.052Z,1516915869.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:31:09.066Z,1516915869.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:09.444Z,1516915869.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:31:09.458Z,1516915869.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:09.827Z,1516915869.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:31:09.850Z,1516915869.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:09.962Z,1516915869.962 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:09.963Z,1516915869.963 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:10.227Z,1516915870.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:31:10.260Z,1516915870.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:10.564Z,1516915870.564 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:10.565Z,1516915870.565 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:10.628Z,1516915870.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:31:10.658Z,1516915870.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:11.027Z,1516915871.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:31:11.054Z,1516915871.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:11.444Z,1516915871.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:31:11.458Z,1516915871.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:11.766Z,1516915871.766 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:11.767Z,1516915871.767 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:11.852Z,1516915871.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:31:11.870Z,1516915871.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:12.241Z,1516915872.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:31:12.266Z,1516915872.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:12.658Z,1516915872.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:12.966Z,1516915872.966 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:12.967Z,1516915872.967 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:13.048Z,1516915873.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:13.448Z,1516915873.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:13.569Z,1516915873.569 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:13.570Z,1516915873.570 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:13.862Z,1516915873.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:14.248Z,1516915874.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:14.658Z,1516915874.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:14.770Z,1516915874.770 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:14.771Z,1516915874.771 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:15.066Z,1516915875.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:15.459Z,1516915875.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:15.848Z,1516915875.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:15.970Z,1516915875.970 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:15.971Z,1516915875.971 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:16.264Z,1516915876.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:16.573Z,1516915876.573 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:16.575Z,1516915876.575 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:16.658Z,1516915876.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:17.048Z,1516915877.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:17.466Z,1516915877.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:17.774Z,1516915877.774 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:17.775Z,1516915877.775 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:17.862Z,1516915877.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:18.268Z,1516915878.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:18.662Z,1516915878.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:18.974Z,1516915878.974 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:18.975Z,1516915878.975 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:19.050Z,1516915879.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:19.454Z,1516915879.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:19.578Z,1516915879.578 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:19.579Z,1516915879.579 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:19.858Z,1516915879.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:20.248Z,1516915880.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:20.659Z,1516915880.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:20.778Z,1516915880.778 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:20.779Z,1516915880.779 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:21.060Z,1516915881.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:21.463Z,1516915881.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:21.857Z,1516915881.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:21.978Z,1516915881.978 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:21.979Z,1516915881.979 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:22.252Z,1516915882.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:22.583Z,1516915882.583 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:22.584Z,1516915882.584 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:22.665Z,1516915882.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:23.048Z,1516915883.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:23.468Z,1516915883.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:23.782Z,1516915883.782 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:23.783Z,1516915883.783 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:23.870Z,1516915883.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:24.272Z,1516915884.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:24.983Z,1516915884.983 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:24.984Z,1516915884.984 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:25.587Z,1516915885.587 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:25.589Z,1516915885.589 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:26.791Z,1516915886.791 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:26.793Z,1516915886.793 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:27.488Z,1516915887.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:27.649Z,1516915887.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:27.976Z,1516915887.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:27.994Z,1516915887.994 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:27.995Z,1516915887.995 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:28.366Z,1516915888.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:31:28.386Z,1516915888.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:28.592Z,1516915888.592 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:28.593Z,1516915888.593 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:28.764Z,1516915888.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:31:28.778Z,1516915888.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:29.150Z,1516915889.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:31:29.179Z,1516915889.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:29.550Z,1516915889.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:31:29.609Z,1516915889.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:29.794Z,1516915889.794 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:29.795Z,1516915889.795 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:29.954Z,1516915889.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:31:29.984Z,1516915889.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:30.362Z,1516915890.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:31:30.381Z,1516915890.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:30.772Z,1516915890.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:31:30.786Z,1516915890.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:30.994Z,1516915890.994 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:30.995Z,1516915890.995 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:31.162Z,1516915891.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:31:31.181Z,1516915891.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:31.547Z,1516915891.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:31:31.597Z,1516915891.597 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:31.598Z,1516915891.598 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:31.606Z,1516915891.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:31.947Z,1516915891.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:31:31.978Z,1516915891.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:32.347Z,1516915892.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:31:32.376Z,1516915892.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:32.748Z,1516915892.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:31:32.776Z,1516915892.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:32.798Z,1516915892.798 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:32.799Z,1516915892.799 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:33.151Z,1516915893.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:31:33.183Z,1516915893.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:33.564Z,1516915893.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:31:33.602Z,1516915893.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:33.967Z,1516915893.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:31:33.982Z,1516915893.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:33.998Z,1516915893.998 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:33.999Z,1516915893.999 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:34.387Z,1516915894.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:34.601Z,1516915894.601 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:34.602Z,1516915894.602 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:34.779Z,1516915894.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:35.179Z,1516915895.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:35.610Z,1516915895.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:35.802Z,1516915895.802 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:35.803Z,1516915895.803 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:35.986Z,1516915895.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:36.391Z,1516915896.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:36.798Z,1516915896.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:37.002Z,1516915897.002 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:37.003Z,1516915897.003 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:37.178Z,1516915897.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:37.568Z,1516915897.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:37.606Z,1516915897.606 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:37.607Z,1516915897.607 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:37.983Z,1516915897.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:38.376Z,1516915898.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:38.776Z,1516915898.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:38.806Z,1516915898.806 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:38.807Z,1516915898.807 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:39.183Z,1516915899.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:39.584Z,1516915899.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:39.969Z,1516915899.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:40.006Z,1516915900.006 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:40.007Z,1516915900.007 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:40.388Z,1516915900.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:40.610Z,1516915900.610 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:40.612Z,1516915900.612 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:40.794Z,1516915900.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:41.182Z,1516915901.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:41.587Z,1516915901.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:41.811Z,1516915901.811 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:41.813Z,1516915901.813 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:41.970Z,1516915901.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:42.376Z,1516915902.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:42.805Z,1516915902.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:43.014Z,1516915903.014 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010820 psu
2018-01-25T21:31:43.015Z,1516915903.015 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:43.172Z,1516915903.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:43.578Z,1516915903.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:43.615Z,1516915903.615 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:43.616Z,1516915903.616 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:43.983Z,1516915903.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:44.376Z,1516915904.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:44.779Z,1516915904.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:44.818Z,1516915904.818 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:44.819Z,1516915904.819 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:45.179Z,1516915905.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:45.578Z,1516915905.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:45.977Z,1516915905.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:46.018Z,1516915906.018 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:46.020Z,1516915906.020 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:46.389Z,1516915906.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:46.619Z,1516915906.619 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:46.621Z,1516915906.621 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:46.788Z,1516915906.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:47.184Z,1516915907.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:47.578Z,1516915907.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:47.822Z,1516915907.822 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:47.823Z,1516915907.823 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:47.974Z,1516915907.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:48.378Z,1516915908.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:48.783Z,1516915908.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:49.022Z,1516915909.022 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:49.023Z,1516915909.023 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:49.178Z,1516915909.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:49.578Z,1516915909.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:49.624Z,1516915909.624 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:49.626Z,1516915909.626 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:49.982Z,1516915909.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:50.380Z,1516915910.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:50.780Z,1516915910.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:50.826Z,1516915910.826 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:50.827Z,1516915910.827 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:51.191Z,1516915911.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:51.575Z,1516915911.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:51.982Z,1516915911.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:52.026Z,1516915912.026 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:52.027Z,1516915912.027 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:52.390Z,1516915912.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:52.629Z,1516915912.629 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:52.630Z,1516915912.630 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:52.786Z,1516915912.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:53.179Z,1516915913.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:53.566Z,1516915913.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:53.830Z,1516915913.830 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010811 psu
2018-01-25T21:31:53.831Z,1516915913.831 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:53.966Z,1516915913.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:54.371Z,1516915914.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:54.775Z,1516915914.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:55.031Z,1516915915.031 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:55.033Z,1516915915.033 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:55.179Z,1516915915.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:55.568Z,1516915915.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:55.635Z,1516915915.635 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010812 psu
2018-01-25T21:31:55.636Z,1516915915.636 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:55.977Z,1516915915.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:56.386Z,1516915916.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:56.787Z,1516915916.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:56.834Z,1516915916.834 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010811 psu
2018-01-25T21:31:56.835Z,1516915916.835 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:57.178Z,1516915917.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:57.569Z,1516915917.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:57.968Z,1516915917.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:58.034Z,1516915918.034 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010811 psu
2018-01-25T21:31:58.035Z,1516915918.035 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:58.391Z,1516915918.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:58.638Z,1516915918.638 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010811 psu
2018-01-25T21:31:58.639Z,1516915918.639 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:58.785Z,1516915918.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:59.189Z,1516915919.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:59.589Z,1516915919.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:31:59.838Z,1516915919.838 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010811 psu
2018-01-25T21:31:59.839Z,1516915919.839 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:31:59.983Z,1516915919.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:00.391Z,1516915920.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:00.794Z,1516915920.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:01.038Z,1516915921.038 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010811 psu
2018-01-25T21:32:01.039Z,1516915921.039 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:01.184Z,1516915921.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:01.561Z,1516915921.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:01.643Z,1516915921.643 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010811 psu
2018-01-25T21:32:01.644Z,1516915921.644 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:01.970Z,1516915921.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:02.397Z,1516915922.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:02.797Z,1516915922.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:02.842Z,1516915922.842 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010811 psu
2018-01-25T21:32:02.843Z,1516915922.843 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:03.195Z,1516915923.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:03.570Z,1516915923.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:03.968Z,1516915923.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:04.042Z,1516915924.042 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010811 psu
2018-01-25T21:32:04.043Z,1516915924.043 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:04.394Z,1516915924.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:04.647Z,1516915924.647 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010811 psu
2018-01-25T21:32:04.649Z,1516915924.649 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:04.792Z,1516915924.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:05.195Z,1516915925.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:05.570Z,1516915925.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:05.850Z,1516915925.850 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010811 psu
2018-01-25T21:32:05.851Z,1516915925.851 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:05.972Z,1516915925.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:06.383Z,1516915926.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:06.782Z,1516915926.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:07.050Z,1516915927.050 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010811 psu
2018-01-25T21:32:07.051Z,1516915927.051 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:07.176Z,1516915927.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:07.572Z,1516915927.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:07.652Z,1516915927.652 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010811 psu
2018-01-25T21:32:07.653Z,1516915927.653 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:07.974Z,1516915927.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:08.377Z,1516915928.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:08.787Z,1516915928.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:08.854Z,1516915928.854 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010811 psu
2018-01-25T21:32:08.855Z,1516915928.855 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:09.178Z,1516915929.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:09.578Z,1516915929.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:09.969Z,1516915929.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:10.054Z,1516915930.054 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010811 psu
2018-01-25T21:32:10.055Z,1516915930.055 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:10.378Z,1516915930.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:10.657Z,1516915930.657 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010811 psu
2018-01-25T21:32:10.658Z,1516915930.658 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:10.780Z,1516915930.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:11.177Z,1516915931.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:11.574Z,1516915931.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:11.858Z,1516915931.858 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010811 psu
2018-01-25T21:32:11.859Z,1516915931.859 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:11.972Z,1516915931.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:12.378Z,1516915932.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:12.782Z,1516915932.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:13.058Z,1516915933.058 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010811 psu
2018-01-25T21:32:13.059Z,1516915933.059 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:13.187Z,1516915933.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:13.569Z,1516915933.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:13.661Z,1516915933.661 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010811 psu
2018-01-25T21:32:13.663Z,1516915933.663 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:13.975Z,1516915933.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:14.377Z,1516915934.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:14.777Z,1516915934.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:14.862Z,1516915934.862 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010811 psu
2018-01-25T21:32:14.863Z,1516915934.863 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:15.197Z,1516915935.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:15.579Z,1516915935.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:15.968Z,1516915935.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:16.062Z,1516915936.062 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010811 psu
2018-01-25T21:32:16.063Z,1516915936.063 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:16.379Z,1516915936.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:16.666Z,1516915936.666 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010811 psu
2018-01-25T21:32:16.667Z,1516915936.667 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:16.776Z,1516915936.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:17.186Z,1516915937.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:17.593Z,1516915937.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:17.866Z,1516915937.866 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010811 psu
2018-01-25T21:32:17.867Z,1516915937.867 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:17.990Z,1516915937.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:18.394Z,1516915938.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:18.748Z,1516915938.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:32:18.762Z,1516915938.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:19.067Z,1516915939.067 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010811 psu
2018-01-25T21:32:19.068Z,1516915939.068 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:19.151Z,1516915939.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:32:19.170Z,1516915939.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:19.555Z,1516915939.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:32:19.569Z,1516915939.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:19.670Z,1516915939.670 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010811 psu
2018-01-25T21:32:19.672Z,1516915939.672 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:19.999Z,1516915939.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:20.365Z,1516915940.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:20.796Z,1516915940.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:20.870Z,1516915940.870 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010811 psu
2018-01-25T21:32:20.871Z,1516915940.871 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:21.192Z,1516915941.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:21.594Z,1516915941.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:21.967Z,1516915941.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:22.070Z,1516915942.070 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010811 psu
2018-01-25T21:32:22.071Z,1516915942.071 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:22.368Z,1516915942.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:22.675Z,1516915942.675 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010811 psu
2018-01-25T21:32:22.677Z,1516915942.677 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:22.774Z,1516915942.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:23.174Z,1516915943.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:23.578Z,1516915943.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:23.878Z,1516915943.878 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010811 psu
2018-01-25T21:32:23.879Z,1516915943.879 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:23.975Z,1516915943.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:24.398Z,1516915944.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:25.078Z,1516915945.078 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010810 psu
2018-01-25T21:32:25.079Z,1516915945.079 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:25.680Z,1516915945.680 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010811 psu
2018-01-25T21:32:25.681Z,1516915945.681 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:26.882Z,1516915946.882 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010811 psu
2018-01-25T21:32:26.883Z,1516915946.883 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:27.620Z,1516915947.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:27.766Z,1516915947.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:28.082Z,1516915948.082 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010811 psu
2018-01-25T21:32:28.084Z,1516915948.084 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:28.134Z,1516915948.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:28.517Z,1516915948.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:32:28.531Z,1516915948.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:28.684Z,1516915948.684 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010811 psu
2018-01-25T21:32:28.686Z,1516915948.686 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:28.917Z,1516915948.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:32:28.931Z,1516915948.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:29.295Z,1516915949.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:32:29.325Z,1516915949.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:29.709Z,1516915949.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:32:29.734Z,1516915949.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:29.886Z,1516915949.886 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010811 psu
2018-01-25T21:32:29.887Z,1516915949.887 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:30.107Z,1516915950.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:32:30.130Z,1516915950.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:30.517Z,1516915950.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:32:30.530Z,1516915950.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:30.918Z,1516915950.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:32:30.938Z,1516915950.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:31.086Z,1516915951.086 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010811 psu
2018-01-25T21:32:31.087Z,1516915951.087 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:31.310Z,1516915951.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:32:31.334Z,1516915951.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:31.689Z,1516915951.689 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010811 psu
2018-01-25T21:32:31.691Z,1516915951.691 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:31.719Z,1516915951.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:32:31.754Z,1516915951.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:32.133Z,1516915952.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:32.528Z,1516915952.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:32.891Z,1516915952.891 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010811 psu
2018-01-25T21:32:32.892Z,1516915952.892 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:32.934Z,1516915952.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:33.337Z,1516915953.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:33.746Z,1516915953.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:34.090Z,1516915954.090 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010811 psu
2018-01-25T21:32:34.091Z,1516915954.091 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:34.146Z,1516915954.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:34.532Z,1516915954.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:34.694Z,1516915954.694 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010811 psu
2018-01-25T21:32:34.695Z,1516915954.695 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:34.918Z,1516915954.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:35.312Z,1516915955.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:35.714Z,1516915955.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:32:35.748Z,1516915955.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:35.894Z,1516915955.894 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010811 psu
2018-01-25T21:32:35.895Z,1516915955.895 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:36.102Z,1516915956.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:32:36.122Z,1516915956.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:36.508Z,1516915956.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:32:36.534Z,1516915956.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:36.916Z,1516915956.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:32:36.934Z,1516915956.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:37.095Z,1516915957.095 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010811 psu
2018-01-25T21:32:37.097Z,1516915957.097 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:37.312Z,1516915957.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:32:37.326Z,1516915957.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:37.703Z,1516915957.703 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010811 psu
2018-01-25T21:32:37.705Z,1516915957.705 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:37.722Z,1516915957.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:32:37.736Z,1516915957.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:38.095Z,1516915958.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:32:38.123Z,1516915958.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:38.495Z,1516915958.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:32:38.525Z,1516915958.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:38.896Z,1516915958.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:32:38.906Z,1516915958.906 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010811 psu
2018-01-25T21:32:38.907Z,1516915958.907 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:38.930Z,1516915958.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:39.295Z,1516915959.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:32:39.327Z,1516915959.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:39.702Z,1516915959.702 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010810 psu
2018-01-25T21:32:39.703Z,1516915959.703 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:39.728Z,1516915959.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:32:39.750Z,1516915959.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:40.118Z,1516915960.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:32:40.140Z,1516915960.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:40.506Z,1516915960.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:32:40.538Z,1516915960.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:40.896Z,1516915960.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:32:40.902Z,1516915960.902 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010811 psu
2018-01-25T21:32:40.903Z,1516915960.903 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:40.929Z,1516915960.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:41.296Z,1516915961.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:32:41.311Z,1516915961.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:41.717Z,1516915961.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:32:41.742Z,1516915961.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:42.095Z,1516915962.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:32:42.102Z,1516915962.102 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010810 psu
2018-01-25T21:32:42.103Z,1516915962.103 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:42.118Z,1516915962.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:42.515Z,1516915962.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:32:42.545Z,1516915962.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:42.706Z,1516915962.706 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010810 psu
2018-01-25T21:32:42.707Z,1516915962.707 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:42.919Z,1516915962.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:32:42.949Z,1516915962.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:43.109Z,1516915963.109 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:32:43.306Z,1516915963.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:32:43.326Z,1516915963.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:43.721Z,1516915963.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:32:43.751Z,1516915963.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:43.905Z,1516915963.905 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:32:43.906Z,1516915963.906 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010810 psu
2018-01-25T21:32:43.908Z,1516915963.908 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:44.098Z,1516915964.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:32:44.126Z,1516915964.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:44.309Z,1516915964.309 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:32:44.498Z,1516915964.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:32:44.520Z,1516915964.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:44.898Z,1516915964.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:32:44.918Z,1516915964.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:45.106Z,1516915965.106 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010811 psu
2018-01-25T21:32:45.107Z,1516915965.107 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:45.302Z,1516915965.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:32:45.322Z,1516915965.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:45.718Z,1516915965.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:32:45.731Z,1516915965.731 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010810 psu
2018-01-25T21:32:45.733Z,1516915965.733 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:45.740Z,1516915965.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:46.116Z,1516915966.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:32:46.130Z,1516915966.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:46.526Z,1516915966.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:46.916Z,1516915966.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:46.934Z,1516915966.934 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010811 psu
2018-01-25T21:32:46.935Z,1516915966.935 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:47.316Z,1516915967.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:47.716Z,1516915967.716 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010810 psu
2018-01-25T21:32:47.717Z,1516915967.717 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:47.746Z,1516915967.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:48.123Z,1516915968.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:48.530Z,1516915968.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:48.918Z,1516915968.918 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010810 psu
2018-01-25T21:32:48.919Z,1516915968.919 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:48.933Z,1516915968.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:49.330Z,1516915969.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:49.737Z,1516915969.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:50.118Z,1516915970.118 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010810 psu
2018-01-25T21:32:50.119Z,1516915970.119 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:50.147Z,1516915970.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:50.514Z,1516915970.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:50.718Z,1516915970.718 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010809 psu
2018-01-25T21:32:50.720Z,1516915970.720 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:50.918Z,1516915970.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:51.317Z,1516915971.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:51.739Z,1516915971.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:51.918Z,1516915971.918 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010810 psu
2018-01-25T21:32:51.919Z,1516915971.919 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:52.142Z,1516915972.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:52.543Z,1516915972.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:52.912Z,1516915972.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:53.119Z,1516915973.119 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010809 psu
2018-01-25T21:32:53.120Z,1516915973.120 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:53.326Z,1516915973.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:53.723Z,1516915973.723 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010809 psu
2018-01-25T21:32:53.725Z,1516915973.725 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:53.747Z,1516915973.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:54.123Z,1516915974.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:54.529Z,1516915974.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:54.926Z,1516915974.926 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010809 psu
2018-01-25T21:32:54.927Z,1516915974.927 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:54.938Z,1516915974.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:55.330Z,1516915975.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:55.739Z,1516915975.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:56.126Z,1516915976.126 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010809 psu
2018-01-25T21:32:56.127Z,1516915976.127 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:56.128Z,1516915976.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:56.523Z,1516915976.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:56.728Z,1516915976.728 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010809 psu
2018-01-25T21:32:56.729Z,1516915976.729 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:56.921Z,1516915976.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:57.325Z,1516915977.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:57.741Z,1516915977.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:57.930Z,1516915977.930 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010809 psu
2018-01-25T21:32:57.931Z,1516915977.931 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:58.133Z,1516915978.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:58.537Z,1516915978.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:58.924Z,1516915978.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:59.130Z,1516915979.130 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010809 psu
2018-01-25T21:32:59.131Z,1516915979.131 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:59.327Z,1516915979.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:32:59.732Z,1516915979.732 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010809 psu
2018-01-25T21:32:59.734Z,1516915979.734 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:32:59.754Z,1516915979.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:00.134Z,1516915980.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:00.530Z,1516915980.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:00.934Z,1516915980.934 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010809 psu
2018-01-25T21:33:00.935Z,1516915980.935 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:00.950Z,1516915980.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:01.344Z,1516915981.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:01.745Z,1516915981.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:02.115Z,1516915982.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:02.134Z,1516915982.134 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010809 psu
2018-01-25T21:33:02.135Z,1516915982.135 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:02.514Z,1516915982.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:02.738Z,1516915982.738 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010809 psu
2018-01-25T21:33:02.739Z,1516915982.739 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:02.922Z,1516915982.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:03.315Z,1516915983.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:03.748Z,1516915983.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:03.940Z,1516915983.940 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010809 psu
2018-01-25T21:33:03.941Z,1516915983.941 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:04.127Z,1516915984.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:04.521Z,1516915984.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:04.916Z,1516915984.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:05.142Z,1516915985.142 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010809 psu
2018-01-25T21:33:05.143Z,1516915985.143 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:05.316Z,1516915985.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:05.742Z,1516915985.742 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010809 psu
2018-01-25T21:33:05.743Z,1516915985.743 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:05.745Z,1516915985.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:06.116Z,1516915986.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:06.525Z,1516915986.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:06.934Z,1516915986.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:06.942Z,1516915986.942 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010809 psu
2018-01-25T21:33:06.943Z,1516915986.943 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:07.329Z,1516915987.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:07.723Z,1516915987.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:08.129Z,1516915988.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:08.142Z,1516915988.142 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010809 psu
2018-01-25T21:33:08.143Z,1516915988.143 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:08.523Z,1516915988.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:08.746Z,1516915988.746 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010809 psu
2018-01-25T21:33:08.748Z,1516915988.748 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:08.930Z,1516915988.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:09.325Z,1516915989.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:09.758Z,1516915989.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:09.946Z,1516915989.946 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010809 psu
2018-01-25T21:33:09.947Z,1516915989.947 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:10.145Z,1516915990.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:10.536Z,1516915990.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:10.917Z,1516915990.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:11.146Z,1516915991.146 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010809 psu
2018-01-25T21:33:11.147Z,1516915991.147 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:11.352Z,1516915991.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:11.751Z,1516915991.751 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010809 psu
2018-01-25T21:33:11.752Z,1516915991.752 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:11.754Z,1516915991.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:12.116Z,1516915992.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:12.528Z,1516915992.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:12.927Z,1516915992.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:12.954Z,1516915992.954 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010809 psu
2018-01-25T21:33:12.955Z,1516915992.955 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:13.326Z,1516915993.326 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:13.326Z,1516915993.326 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 5
2018-01-25T21:33:13.326Z,1516915993.326 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-25T21:33:13.328Z,1516915993.328 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:13.328Z,1516915993.328 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2018-01-25T21:33:13.328Z,1516915993.328 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-25T21:33:13.330Z,1516915993.330 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:13.330Z,1516915993.330 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-01-25T21:33:13.330Z,1516915993.330 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-25T21:33:13.363Z,1516915993.363 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-25T21:33:13.363Z,1516915993.363 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-25T21:33:13.363Z,1516915993.363 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-25T21:33:13.764Z,1516915993.764 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-25T21:33:13.764Z,1516915993.764 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 5
2018-01-25T21:33:13.769Z,1516915993.769 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-25T21:33:13.769Z,1516915993.769 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2018-01-25T21:33:13.769Z,1516915993.769 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-25T21:33:13.770Z,1516915993.770 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-01-25T21:33:14.128Z,1516915994.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-25T21:33:14.128Z,1516915994.128 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T21:33:14.129Z,1516915994.129 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T21:33:14.129Z,1516915994.129 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-25T21:33:14.129Z,1516915994.129 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T21:33:14.130Z,1516915994.130 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T21:33:14.130Z,1516915994.130 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-25T21:33:14.130Z,1516915994.130 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T21:33:14.131Z,1516915994.131 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T21:33:14.154Z,1516915994.154 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010809 psu
2018-01-25T21:33:14.155Z,1516915994.155 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:14.527Z,1516915994.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-25T21:33:14.528Z,1516915994.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:14.755Z,1516915994.755 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010809 psu
2018-01-25T21:33:14.757Z,1516915994.757 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:14.936Z,1516915994.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-25T21:33:14.937Z,1516915994.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:15.339Z,1516915995.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-25T21:33:15.339Z,1516915995.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:15.749Z,1516915995.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-25T21:33:15.752Z,1516915995.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:15.958Z,1516915995.958 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010809 psu
2018-01-25T21:33:15.959Z,1516915995.959 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:16.134Z,1516915996.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-25T21:33:16.135Z,1516915996.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:16.531Z,1516915996.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-25T21:33:16.532Z,1516915996.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:16.939Z,1516915996.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-25T21:33:16.940Z,1516915996.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:17.158Z,1516915997.158 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010809 psu
2018-01-25T21:33:17.159Z,1516915997.159 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:17.338Z,1516915997.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-25T21:33:17.339Z,1516915997.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:17.717Z,1516915997.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-25T21:33:17.718Z,1516915997.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:17.760Z,1516915997.760 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010809 psu
2018-01-25T21:33:17.762Z,1516915997.762 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:18.121Z,1516915998.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-25T21:33:18.122Z,1516915998.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:18.519Z,1516915998.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-25T21:33:18.520Z,1516915998.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:18.950Z,1516915998.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-25T21:33:18.951Z,1516915998.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:18.962Z,1516915998.962 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010809 psu
2018-01-25T21:33:18.963Z,1516915998.963 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:19.351Z,1516915999.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-25T21:33:19.352Z,1516915999.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:19.714Z,1516915999.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-25T21:33:19.715Z,1516915999.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:20.121Z,1516916000.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-25T21:33:20.122Z,1516916000.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:20.162Z,1516916000.162 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010809 psu
2018-01-25T21:33:20.163Z,1516916000.163 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:20.527Z,1516916000.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-25T21:33:20.528Z,1516916000.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:20.765Z,1516916000.765 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010809 psu
2018-01-25T21:33:20.766Z,1516916000.766 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:20.924Z,1516916000.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-25T21:33:20.929Z,1516916000.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:21.330Z,1516916001.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-25T21:33:21.331Z,1516916001.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:21.729Z,1516916001.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-25T21:33:21.730Z,1516916001.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:21.966Z,1516916001.966 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010809 psu
2018-01-25T21:33:21.967Z,1516916001.967 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:22.135Z,1516916002.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-25T21:33:22.136Z,1516916002.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:22.543Z,1516916002.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-25T21:33:22.544Z,1516916002.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:22.925Z,1516916002.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-25T21:33:22.926Z,1516916002.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:23.166Z,1516916003.166 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010809 psu
2018-01-25T21:33:23.167Z,1516916003.167 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:23.320Z,1516916003.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-25T21:33:23.322Z,1516916003.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:23.325Z,1516916003.325 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-25T21:33:23.325Z,1516916003.325 [Default:CheckIn:C.Wait] Stopped
2018-01-25T21:33:23.325Z,1516916003.325 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-25T21:33:23.325Z,1516916003.325 [Default:CheckIn:D] Running Loop=1
2018-01-25T21:33:23.731Z,1516916003.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-25T21:33:23.732Z,1516916003.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:23.737Z,1516916003.737 [Default:CheckIn:D] Stopped
2018-01-25T21:33:23.737Z,1516916003.737 [Default:CheckIn:E] Running Loop=1
2018-01-25T21:33:23.770Z,1516916003.770 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010809 psu
2018-01-25T21:33:23.771Z,1516916003.771 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:24.117Z,1516916004.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-25T21:33:24.118Z,1516916004.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:24.126Z,1516916004.126 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 11.081491 min 
2018-01-25T21:33:24.128Z,1516916004.128 [Default:CheckIn:E] Stopped
2018-01-25T21:33:24.128Z,1516916004.128 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-25T21:33:24.128Z,1516916004.128 [Default:CheckIn] Stopped
2018-01-25T21:33:24.128Z,1516916004.128 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-25T21:33:24.128Z,1516916004.128 [Default:CheckIn](INFO): Running loop #2
2018-01-25T21:33:24.128Z,1516916004.128 [Default:CheckIn] Running Loop=2
2018-01-25T21:33:24.128Z,1516916004.128 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-25T21:33:24.133Z,1516916004.133 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-25T21:33:24.536Z,1516916004.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-25T21:33:24.537Z,1516916004.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:24.970Z,1516916004.970 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010809 psu
2018-01-25T21:33:24.971Z,1516916004.971 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:26.170Z,1516916006.170 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010809 psu
2018-01-25T21:33:26.171Z,1516916006.171 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:26.774Z,1516916006.774 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010809 psu
2018-01-25T21:33:26.776Z,1516916006.776 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:27.786Z,1516916007.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-01-25T21:33:27.787Z,1516916007.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:27.927Z,1516916007.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s.
2018-01-25T21:33:27.933Z,1516916007.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:27.974Z,1516916007.974 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010809 psu
2018-01-25T21:33:27.975Z,1516916007.975 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:28.272Z,1516916008.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-01-25T21:33:28.273Z,1516916008.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:28.646Z,1516916008.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-01-25T21:33:28.647Z,1516916008.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:29.051Z,1516916009.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-01-25T21:33:29.052Z,1516916009.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:29.175Z,1516916009.175 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010809 psu
2018-01-25T21:33:29.177Z,1516916009.177 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:29.458Z,1516916009.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-01-25T21:33:29.459Z,1516916009.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:29.779Z,1516916009.779 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010809 psu
2018-01-25T21:33:29.780Z,1516916009.780 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:29.874Z,1516916009.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-01-25T21:33:29.875Z,1516916009.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:30.262Z,1516916010.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-01-25T21:33:30.263Z,1516916010.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:30.658Z,1516916010.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-01-25T21:33:30.659Z,1516916010.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:30.978Z,1516916010.978 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010809 psu
2018-01-25T21:33:30.979Z,1516916010.979 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:31.069Z,1516916011.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-01-25T21:33:31.073Z,1516916011.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:31.464Z,1516916011.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-01-25T21:33:31.465Z,1516916011.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:31.850Z,1516916011.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-01-25T21:33:31.851Z,1516916011.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:32.178Z,1516916012.178 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010809 psu
2018-01-25T21:33:32.179Z,1516916012.179 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:32.252Z,1516916012.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-01-25T21:33:32.253Z,1516916012.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:32.659Z,1516916012.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-01-25T21:33:32.660Z,1516916012.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:32.786Z,1516916012.786 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010809 psu
2018-01-25T21:33:32.787Z,1516916012.787 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:33.078Z,1516916013.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2018-01-25T21:33:33.079Z,1516916013.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:33.464Z,1516916013.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:33.854Z,1516916013.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:33.986Z,1516916013.986 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010809 psu
2018-01-25T21:33:33.987Z,1516916013.987 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:34.263Z,1516916014.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:34.660Z,1516916014.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:35.063Z,1516916015.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:35.186Z,1516916015.186 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010809 psu
2018-01-25T21:33:35.187Z,1516916015.187 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:35.451Z,1516916015.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:35.788Z,1516916015.788 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010809 psu
2018-01-25T21:33:35.789Z,1516916015.789 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:35.881Z,1516916015.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:36.256Z,1516916016.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:36.652Z,1516916016.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:36.990Z,1516916016.990 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010809 psu
2018-01-25T21:33:36.991Z,1516916016.991 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:37.065Z,1516916017.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:37.447Z,1516916017.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:37.849Z,1516916017.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:38.190Z,1516916018.190 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010808 psu
2018-01-25T21:33:38.191Z,1516916018.191 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:38.270Z,1516916018.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:38.659Z,1516916018.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:38.793Z,1516916018.793 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010809 psu
2018-01-25T21:33:38.794Z,1516916018.794 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:39.063Z,1516916019.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:39.463Z,1516916019.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:39.848Z,1516916019.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:39.994Z,1516916019.994 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010808 psu
2018-01-25T21:33:39.995Z,1516916019.995 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:40.261Z,1516916020.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:40.658Z,1516916020.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:41.049Z,1516916021.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:41.194Z,1516916021.194 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010808 psu
2018-01-25T21:33:41.195Z,1516916021.195 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:41.454Z,1516916021.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:41.797Z,1516916021.797 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010808 psu
2018-01-25T21:33:41.799Z,1516916021.799 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:41.874Z,1516916021.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:42.270Z,1516916022.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:42.659Z,1516916022.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:42.998Z,1516916022.998 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010808 psu
2018-01-25T21:33:42.999Z,1516916022.999 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:43.074Z,1516916023.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:43.441Z,1516916023.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:43.841Z,1516916023.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:44.198Z,1516916024.198 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010809 psu
2018-01-25T21:33:44.199Z,1516916024.199 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:44.251Z,1516916024.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:44.655Z,1516916024.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:44.802Z,1516916024.802 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010808 psu
2018-01-25T21:33:44.803Z,1516916024.803 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:45.059Z,1516916025.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:45.456Z,1516916025.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:45.848Z,1516916025.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:46.002Z,1516916026.002 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010808 psu
2018-01-25T21:33:46.003Z,1516916026.003 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:46.252Z,1516916026.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:46.660Z,1516916026.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:47.048Z,1516916027.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:47.202Z,1516916027.202 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010808 psu
2018-01-25T21:33:47.203Z,1516916027.203 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:47.455Z,1516916027.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:47.817Z,1516916027.817 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010809 psu
2018-01-25T21:33:47.818Z,1516916027.818 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:47.878Z,1516916027.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:48.263Z,1516916028.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:48.659Z,1516916028.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:49.018Z,1516916029.018 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010808 psu
2018-01-25T21:33:49.020Z,1516916029.020 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:49.074Z,1516916029.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:49.459Z,1516916029.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:49.860Z,1516916029.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:50.218Z,1516916030.218 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010808 psu
2018-01-25T21:33:50.219Z,1516916030.219 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:50.282Z,1516916030.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:50.662Z,1516916030.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:50.839Z,1516916030.839 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010808 psu
2018-01-25T21:33:50.840Z,1516916030.840 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:51.065Z,1516916031.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:51.466Z,1516916031.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:51.862Z,1516916031.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:52.045Z,1516916032.045 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010808 psu
2018-01-25T21:33:52.046Z,1516916032.046 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:52.259Z,1516916032.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:52.661Z,1516916032.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:52.814Z,1516916032.814 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010808 psu
2018-01-25T21:33:52.816Z,1516916032.816 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:53.050Z,1516916033.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:53.462Z,1516916033.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:53.878Z,1516916033.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:54.014Z,1516916034.014 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010808 psu
2018-01-25T21:33:54.015Z,1516916034.015 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:54.267Z,1516916034.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:54.663Z,1516916034.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:55.046Z,1516916035.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:55.214Z,1516916035.214 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010808 psu
2018-01-25T21:33:55.215Z,1516916035.215 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:55.444Z,1516916035.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:55.820Z,1516916035.820 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010808 psu
2018-01-25T21:33:55.821Z,1516916035.821 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:55.886Z,1516916035.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:56.258Z,1516916036.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:56.657Z,1516916036.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:57.030Z,1516916037.030 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010808 psu
2018-01-25T21:33:57.032Z,1516916037.032 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:57.066Z,1516916037.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:57.462Z,1516916037.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:57.825Z,1516916037.825 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010808 psu
2018-01-25T21:33:57.826Z,1516916037.826 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:57.886Z,1516916037.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:58.258Z,1516916038.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:58.662Z,1516916038.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:59.026Z,1516916039.026 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010808 psu
2018-01-25T21:33:59.028Z,1516916039.028 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:33:59.066Z,1516916039.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:59.458Z,1516916039.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:33:59.879Z,1516916039.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:00.226Z,1516916040.226 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010808 psu
2018-01-25T21:34:00.227Z,1516916040.227 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:00.279Z,1516916040.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:00.667Z,1516916040.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:00.826Z,1516916040.826 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010808 psu
2018-01-25T21:34:00.828Z,1516916040.828 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:01.073Z,1516916041.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:01.450Z,1516916041.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:01.870Z,1516916041.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:02.026Z,1516916042.026 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010808 psu
2018-01-25T21:34:02.027Z,1516916042.027 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:02.251Z,1516916042.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:02.652Z,1516916042.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:03.056Z,1516916043.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:03.226Z,1516916043.226 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010808 psu
2018-01-25T21:34:03.227Z,1516916043.227 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:03.452Z,1516916043.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:03.852Z,1516916043.852 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010808 psu
2018-01-25T21:34:03.853Z,1516916043.853 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:03.864Z,1516916043.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:04.251Z,1516916044.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:04.652Z,1516916044.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:05.054Z,1516916045.054 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010808 psu
2018-01-25T21:34:05.055Z,1516916045.055 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:05.061Z,1516916045.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:05.458Z,1516916045.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:05.835Z,1516916045.835 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010808 psu
2018-01-25T21:34:05.837Z,1516916045.837 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:05.890Z,1516916045.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:06.267Z,1516916046.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:06.660Z,1516916046.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:07.038Z,1516916047.038 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010808 psu
2018-01-25T21:34:07.039Z,1516916047.039 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:07.065Z,1516916047.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:07.466Z,1516916047.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:07.868Z,1516916047.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:08.238Z,1516916048.238 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010808 psu
2018-01-25T21:34:08.239Z,1516916048.239 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:08.260Z,1516916048.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:08.668Z,1516916048.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:08.839Z,1516916048.839 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010808 psu
2018-01-25T21:34:08.840Z,1516916048.840 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:09.070Z,1516916049.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:09.464Z,1516916049.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:09.867Z,1516916049.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:10.038Z,1516916050.038 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010808 psu
2018-01-25T21:34:10.039Z,1516916050.039 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:10.250Z,1516916050.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:10.654Z,1516916050.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:11.054Z,1516916051.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:11.238Z,1516916051.238 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010808 psu
2018-01-25T21:34:11.239Z,1516916051.239 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:11.458Z,1516916051.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:11.872Z,1516916051.872 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010808 psu
2018-01-25T21:34:11.877Z,1516916051.877 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:11.883Z,1516916051.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:12.269Z,1516916052.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:12.666Z,1516916052.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:13.054Z,1516916053.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:13.090Z,1516916053.090 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010808 psu
2018-01-25T21:34:13.091Z,1516916053.091 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:13.454Z,1516916053.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:13.851Z,1516916053.851 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010807 psu
2018-01-25T21:34:13.853Z,1516916053.853 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:13.881Z,1516916053.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:14.263Z,1516916054.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:14.663Z,1516916054.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:15.054Z,1516916055.054 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010808 psu
2018-01-25T21:34:15.055Z,1516916055.055 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:15.086Z,1516916055.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:15.474Z,1516916055.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:15.872Z,1516916055.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:16.246Z,1516916056.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:16.262Z,1516916056.262 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010807 psu
2018-01-25T21:34:16.263Z,1516916056.263 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:16.649Z,1516916056.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:16.852Z,1516916056.852 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010807 psu
2018-01-25T21:34:16.853Z,1516916056.853 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:17.054Z,1516916057.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:17.447Z,1516916057.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:17.882Z,1516916057.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:18.054Z,1516916058.054 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010807 psu
2018-01-25T21:34:18.055Z,1516916058.055 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:18.260Z,1516916058.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:18.657Z,1516916058.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:19.054Z,1516916059.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:19.254Z,1516916059.254 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010807 psu
2018-01-25T21:34:19.255Z,1516916059.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:19.457Z,1516916059.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:19.856Z,1516916059.856 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010807 psu
2018-01-25T21:34:19.857Z,1516916059.857 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:19.874Z,1516916059.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:20.262Z,1516916060.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:20.658Z,1516916060.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:21.058Z,1516916061.058 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010807 psu
2018-01-25T21:34:21.059Z,1516916061.059 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:21.063Z,1516916061.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:21.463Z,1516916061.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:21.871Z,1516916061.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:22.258Z,1516916062.258 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010807 psu
2018-01-25T21:34:22.259Z,1516916062.259 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:22.266Z,1516916062.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:22.640Z,1516916062.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:22.860Z,1516916062.860 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010807 psu
2018-01-25T21:34:22.862Z,1516916062.862 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:23.070Z,1516916063.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:23.446Z,1516916063.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:23.875Z,1516916063.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:24.062Z,1516916064.062 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010807 psu
2018-01-25T21:34:24.063Z,1516916064.063 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:24.267Z,1516916064.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:24.668Z,1516916064.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:25.262Z,1516916065.262 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010807 psu
2018-01-25T21:34:25.264Z,1516916065.264 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:25.865Z,1516916065.865 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010807 psu
2018-01-25T21:34:25.867Z,1516916065.867 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:27.066Z,1516916067.066 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010807 psu
2018-01-25T21:34:27.067Z,1516916067.067 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:27.919Z,1516916067.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:28.041Z,1516916068.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:28.266Z,1516916068.266 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010807 psu
2018-01-25T21:34:28.267Z,1516916068.267 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:28.412Z,1516916068.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:28.799Z,1516916068.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:28.870Z,1516916068.870 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010807 psu
2018-01-25T21:34:28.871Z,1516916068.871 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:29.190Z,1516916069.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:29.598Z,1516916069.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:29.998Z,1516916069.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:30.070Z,1516916070.070 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010807 psu
2018-01-25T21:34:30.071Z,1516916070.071 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:30.396Z,1516916070.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:30.803Z,1516916070.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:31.212Z,1516916071.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:31.270Z,1516916071.270 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010807 psu
2018-01-25T21:34:31.271Z,1516916071.271 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:31.599Z,1516916071.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:31.874Z,1516916071.874 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010807 psu
2018-01-25T21:34:31.876Z,1516916071.876 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:31.996Z,1516916071.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:32.398Z,1516916072.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:32.802Z,1516916072.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:33.074Z,1516916073.074 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010807 psu
2018-01-25T21:34:33.075Z,1516916073.075 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:33.201Z,1516916073.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:33.609Z,1516916073.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:34.006Z,1516916074.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:34.274Z,1516916074.274 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010807 psu
2018-01-25T21:34:34.275Z,1516916074.275 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:34.414Z,1516916074.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:34.805Z,1516916074.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:34.879Z,1516916074.879 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010807 psu
2018-01-25T21:34:34.881Z,1516916074.881 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:35.188Z,1516916075.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:35.583Z,1516916075.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:36.005Z,1516916076.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:36.082Z,1516916076.082 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010807 psu
2018-01-25T21:34:36.083Z,1516916076.083 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:36.397Z,1516916076.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:36.789Z,1516916076.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:37.216Z,1516916077.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:37.282Z,1516916077.282 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010807 psu
2018-01-25T21:34:37.283Z,1516916077.283 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:37.606Z,1516916077.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:37.884Z,1516916077.884 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010807 psu
2018-01-25T21:34:37.885Z,1516916077.885 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:37.991Z,1516916077.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:38.394Z,1516916078.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:38.790Z,1516916078.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:39.086Z,1516916079.086 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010807 psu
2018-01-25T21:34:39.087Z,1516916079.087 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:39.204Z,1516916079.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:39.590Z,1516916079.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:39.998Z,1516916079.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:40.286Z,1516916080.286 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010807 psu
2018-01-25T21:34:40.287Z,1516916080.287 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:40.421Z,1516916080.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:40.827Z,1516916080.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:40.889Z,1516916080.889 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010807 psu
2018-01-25T21:34:40.890Z,1516916080.890 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:41.181Z,1516916081.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:41.597Z,1516916081.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:41.996Z,1516916081.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:42.090Z,1516916082.090 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010807 psu
2018-01-25T21:34:42.091Z,1516916082.091 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:42.406Z,1516916082.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:42.799Z,1516916082.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:43.199Z,1516916083.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:43.290Z,1516916083.290 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010807 psu
2018-01-25T21:34:43.291Z,1516916083.291 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:43.606Z,1516916083.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:43.893Z,1516916083.893 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010807 psu
2018-01-25T21:34:43.894Z,1516916083.894 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:44.009Z,1516916084.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:44.383Z,1516916084.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:44.789Z,1516916084.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:45.094Z,1516916085.094 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010807 psu
2018-01-25T21:34:45.095Z,1516916085.095 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:45.198Z,1516916085.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:45.597Z,1516916085.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:46.020Z,1516916086.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:46.294Z,1516916086.294 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010807 psu
2018-01-25T21:34:46.296Z,1516916086.296 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:46.419Z,1516916086.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:46.823Z,1516916086.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:46.898Z,1516916086.898 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010807 psu
2018-01-25T21:34:46.899Z,1516916086.899 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:47.220Z,1516916087.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:47.603Z,1516916087.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:48.022Z,1516916088.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:48.113Z,1516916088.113 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010807 psu
2018-01-25T21:34:48.115Z,1516916088.115 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:48.409Z,1516916088.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:48.826Z,1516916088.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:48.901Z,1516916088.901 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010807 psu
2018-01-25T21:34:48.903Z,1516916088.903 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:49.195Z,1516916089.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:49.600Z,1516916089.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:49.988Z,1516916089.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:50.102Z,1516916090.102 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010807 psu
2018-01-25T21:34:50.103Z,1516916090.103 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:50.390Z,1516916090.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:50.786Z,1516916090.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:51.205Z,1516916091.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:51.302Z,1516916091.302 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010807 psu
2018-01-25T21:34:51.303Z,1516916091.303 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:51.598Z,1516916091.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:51.905Z,1516916091.905 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:34:51.907Z,1516916091.907 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:51.989Z,1516916091.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:52.402Z,1516916092.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:52.804Z,1516916092.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:53.106Z,1516916093.106 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:34:53.107Z,1516916093.107 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:53.226Z,1516916093.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:53.606Z,1516916093.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:54.059Z,1516916094.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:54.306Z,1516916094.306 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010807 psu
2018-01-25T21:34:54.308Z,1516916094.308 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:54.439Z,1516916094.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:54.835Z,1516916094.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:54.938Z,1516916094.938 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010807 psu
2018-01-25T21:34:54.939Z,1516916094.939 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:55.239Z,1516916095.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:55.639Z,1516916095.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:56.034Z,1516916096.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:56.138Z,1516916096.138 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010807 psu
2018-01-25T21:34:56.139Z,1516916096.139 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:56.432Z,1516916096.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:56.847Z,1516916096.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:56.913Z,1516916096.913 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:34:56.915Z,1516916096.915 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:57.204Z,1516916097.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:57.607Z,1516916097.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:58.015Z,1516916098.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:58.114Z,1516916098.114 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:34:58.115Z,1516916098.115 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:58.388Z,1516916098.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:58.802Z,1516916098.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:59.179Z,1516916099.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:59.314Z,1516916099.314 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010807 psu
2018-01-25T21:34:59.315Z,1516916099.315 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:59.580Z,1516916099.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:34:59.918Z,1516916099.918 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010807 psu
2018-01-25T21:34:59.919Z,1516916099.919 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:34:59.997Z,1516916099.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:00.389Z,1516916100.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:00.792Z,1516916100.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:01.118Z,1516916101.118 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:35:01.119Z,1516916101.119 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:01.207Z,1516916101.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:01.594Z,1516916101.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:01.992Z,1516916101.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:02.318Z,1516916102.318 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:35:02.319Z,1516916102.319 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:02.382Z,1516916102.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:02.778Z,1516916102.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:02.922Z,1516916102.922 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:35:02.924Z,1516916102.924 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:03.182Z,1516916103.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:03.581Z,1516916103.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:03.988Z,1516916103.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:04.122Z,1516916104.122 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:35:04.123Z,1516916104.123 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:04.388Z,1516916104.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:04.795Z,1516916104.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:05.184Z,1516916105.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:05.322Z,1516916105.322 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:35:05.323Z,1516916105.323 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:05.593Z,1516916105.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:05.927Z,1516916105.927 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:35:05.928Z,1516916105.928 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:05.995Z,1516916105.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:06.390Z,1516916106.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:06.792Z,1516916106.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:07.130Z,1516916107.130 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:35:07.131Z,1516916107.131 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:07.214Z,1516916107.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:07.595Z,1516916107.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:07.992Z,1516916107.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:08.330Z,1516916108.330 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:35:08.332Z,1516916108.332 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:08.407Z,1516916108.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:08.803Z,1516916108.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:08.932Z,1516916108.932 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:35:08.933Z,1516916108.933 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:09.194Z,1516916109.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:09.582Z,1516916109.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:09.987Z,1516916109.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:10.135Z,1516916110.135 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:35:10.136Z,1516916110.136 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:10.398Z,1516916110.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:10.790Z,1516916110.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:11.183Z,1516916111.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:11.334Z,1516916111.334 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:35:11.335Z,1516916111.335 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:11.587Z,1516916111.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:11.936Z,1516916111.936 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:35:11.946Z,1516916111.946 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:11.998Z,1516916111.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:12.393Z,1516916112.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:12.794Z,1516916112.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:13.146Z,1516916113.146 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:35:13.147Z,1516916113.147 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:13.207Z,1516916113.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:13.593Z,1516916113.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:13.940Z,1516916113.940 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:35:13.941Z,1516916113.941 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:14.006Z,1516916114.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:14.378Z,1516916114.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:14.778Z,1516916114.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:15.142Z,1516916115.142 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:35:15.143Z,1516916115.143 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:15.177Z,1516916115.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:15.586Z,1516916115.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:16.009Z,1516916116.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:16.342Z,1516916116.342 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:35:16.344Z,1516916116.344 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:16.398Z,1516916116.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:16.791Z,1516916116.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:16.944Z,1516916116.944 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:35:16.945Z,1516916116.945 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:17.185Z,1516916117.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:17.589Z,1516916117.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:17.987Z,1516916117.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:18.146Z,1516916118.146 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:35:18.147Z,1516916118.147 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:18.384Z,1516916118.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:18.794Z,1516916118.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:19.194Z,1516916119.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:19.346Z,1516916119.346 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:35:19.347Z,1516916119.347 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:19.598Z,1516916119.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:19.949Z,1516916119.949 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:35:19.950Z,1516916119.950 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:20.007Z,1516916120.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:20.394Z,1516916120.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:20.788Z,1516916120.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:21.151Z,1516916121.151 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:35:21.152Z,1516916121.152 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:21.202Z,1516916121.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:21.594Z,1516916121.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:21.998Z,1516916121.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:22.350Z,1516916122.350 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:35:22.351Z,1516916122.351 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:22.411Z,1516916122.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:22.844Z,1516916122.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:22.953Z,1516916122.953 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:35:22.955Z,1516916122.955 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:23.194Z,1516916123.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:23.578Z,1516916123.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:23.000Z,1516916124.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:24.154Z,1516916124.154 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:35:24.155Z,1516916124.155 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:24.383Z,1516916124.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:24.794Z,1516916124.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:25.355Z,1516916125.355 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:35:25.356Z,1516916125.356 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:25.959Z,1516916125.959 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:35:25.960Z,1516916125.960 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:27.158Z,1516916127.158 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:35:27.160Z,1516916127.160 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:28.188Z,1516916128.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:28.326Z,1516916128.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:28.370Z,1516916128.370 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:35:28.372Z,1516916128.372 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:28.674Z,1516916128.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:28.962Z,1516916128.962 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:35:28.964Z,1516916128.964 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:29.072Z,1516916129.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:29.470Z,1516916129.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:29.875Z,1516916129.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:30.162Z,1516916130.162 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:35:30.163Z,1516916130.163 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:30.288Z,1516916130.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:30.676Z,1516916130.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:31.070Z,1516916131.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:31.362Z,1516916131.362 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:35:31.363Z,1516916131.363 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:31.465Z,1516916131.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:31.869Z,1516916131.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:31.967Z,1516916131.967 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:35:31.969Z,1516916131.969 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:32.273Z,1516916132.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:32.668Z,1516916132.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:33.073Z,1516916133.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:33.170Z,1516916133.170 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:35:33.171Z,1516916133.171 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:33.476Z,1516916133.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:33.873Z,1516916133.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:34.265Z,1516916134.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:34.370Z,1516916134.370 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:35:34.372Z,1516916134.372 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:34.677Z,1516916134.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:34.972Z,1516916134.972 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:35:34.973Z,1516916134.973 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:35.068Z,1516916135.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:35.468Z,1516916135.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:35.883Z,1516916135.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:36.174Z,1516916136.174 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:35:36.175Z,1516916136.175 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:36.286Z,1516916136.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:36.675Z,1516916136.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:37.064Z,1516916137.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:37.374Z,1516916137.374 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:35:37.375Z,1516916137.375 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:37.471Z,1516916137.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:37.865Z,1516916137.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:37.976Z,1516916137.976 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:35:37.978Z,1516916137.978 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:38.269Z,1516916138.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:38.666Z,1516916138.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:39.074Z,1516916139.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:39.178Z,1516916139.178 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:35:39.179Z,1516916139.179 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:39.482Z,1516916139.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:39.886Z,1516916139.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:40.264Z,1516916140.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:40.378Z,1516916140.378 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:35:40.379Z,1516916140.379 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:40.668Z,1516916140.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:40.981Z,1516916140.981 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:35:40.982Z,1516916140.982 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:41.074Z,1516916141.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:41.471Z,1516916141.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:41.877Z,1516916141.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:42.182Z,1516916142.182 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:35:42.183Z,1516916142.183 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:42.288Z,1516916142.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:42.678Z,1516916142.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:43.074Z,1516916143.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:43.382Z,1516916143.382 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:35:43.383Z,1516916143.383 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:43.472Z,1516916143.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:43.874Z,1516916143.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:43.986Z,1516916143.986 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:35:43.987Z,1516916143.987 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:44.279Z,1516916144.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:44.683Z,1516916144.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:45.076Z,1516916145.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:45.186Z,1516916145.186 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:35:45.187Z,1516916145.187 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:45.482Z,1516916145.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:45.886Z,1516916145.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:46.257Z,1516916146.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:46.386Z,1516916146.386 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:35:46.387Z,1516916146.387 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:46.686Z,1516916146.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:46.990Z,1516916146.990 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:35:46.992Z,1516916146.992 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:47.063Z,1516916147.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:47.470Z,1516916147.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:47.874Z,1516916147.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:48.190Z,1516916148.190 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:35:48.191Z,1516916148.191 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:48.278Z,1516916148.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:48.682Z,1516916148.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:49.068Z,1516916149.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:49.392Z,1516916149.392 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:35:49.393Z,1516916149.393 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:49.478Z,1516916149.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:49.865Z,1516916149.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:49.995Z,1516916149.995 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:35:49.996Z,1516916149.996 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:50.278Z,1516916150.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:50.666Z,1516916150.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:51.075Z,1516916151.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:51.200Z,1516916151.200 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:35:51.201Z,1516916151.201 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:51.479Z,1516916151.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:51.878Z,1516916151.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:52.267Z,1516916152.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:52.402Z,1516916152.402 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:35:52.403Z,1516916152.403 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:52.677Z,1516916152.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:53.001Z,1516916153.001 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:35:53.003Z,1516916153.003 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:53.090Z,1516916153.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:53.472Z,1516916153.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:53.875Z,1516916153.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:54.204Z,1516916154.204 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:35:54.205Z,1516916154.205 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:54.298Z,1516916154.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:54.676Z,1516916154.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:55.078Z,1516916155.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:55.406Z,1516916155.406 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:35:55.407Z,1516916155.407 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:55.481Z,1516916155.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:55.882Z,1516916155.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:56.004Z,1516916156.004 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:35:56.006Z,1516916156.006 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:56.279Z,1516916156.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:56.683Z,1516916156.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:57.075Z,1516916157.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:57.206Z,1516916157.206 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:35:57.207Z,1516916157.207 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:57.482Z,1516916157.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:57.886Z,1516916157.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:58.257Z,1516916158.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:58.406Z,1516916158.406 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:35:58.407Z,1516916158.407 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:58.686Z,1516916158.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:59.037Z,1516916159.037 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:35:59.038Z,1516916159.038 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:35:59.093Z,1516916159.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:59.474Z,1516916159.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:35:59.875Z,1516916159.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:00.238Z,1516916160.238 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:36:00.239Z,1516916160.239 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:00.294Z,1516916160.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:00.676Z,1516916160.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:01.012Z,1516916161.012 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:36:01.013Z,1516916161.013 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:01.078Z,1516916161.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:01.475Z,1516916161.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:01.874Z,1516916161.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:02.214Z,1516916162.214 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:36:02.215Z,1516916162.215 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:02.282Z,1516916162.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:02.678Z,1516916162.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:03.083Z,1516916163.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:03.413Z,1516916163.413 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:36:03.414Z,1516916163.414 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:36:03.416Z,1516916163.416 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:03.482Z,1516916163.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:03.817Z,1516916163.817 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:36:03.894Z,1516916163.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:04.017Z,1516916164.017 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:36:04.018Z,1516916164.018 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:04.264Z,1516916164.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:04.421Z,1516916164.421 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:36:04.664Z,1516916164.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:05.064Z,1516916165.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:05.217Z,1516916165.217 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:36:05.218Z,1516916165.218 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:36:05.220Z,1516916165.220 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:05.469Z,1516916165.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:05.621Z,1516916165.621 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:36:05.875Z,1516916165.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:06.278Z,1516916166.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:06.417Z,1516916166.417 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:36:06.418Z,1516916166.418 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:36:06.419Z,1516916166.419 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:06.668Z,1516916166.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:06.821Z,1516916166.821 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:36:07.033Z,1516916167.033 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:36:07.035Z,1516916167.035 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:07.067Z,1516916167.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:07.478Z,1516916167.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:07.873Z,1516916167.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:08.235Z,1516916168.235 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:36:08.236Z,1516916168.236 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:08.290Z,1516916168.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:08.674Z,1516916168.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:09.083Z,1516916169.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:09.434Z,1516916169.434 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:36:09.434Z,1516916169.434 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:36:09.436Z,1516916169.436 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:09.490Z,1516916169.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:09.839Z,1516916169.839 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:36:09.889Z,1516916169.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:10.026Z,1516916170.026 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:36:10.027Z,1516916170.027 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:10.276Z,1516916170.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:10.429Z,1516916170.429 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:36:10.675Z,1516916170.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:11.075Z,1516916171.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:11.225Z,1516916171.225 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:36:11.226Z,1516916171.226 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:36:11.228Z,1516916171.228 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:11.476Z,1516916171.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:11.629Z,1516916171.629 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:36:11.879Z,1516916171.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:12.286Z,1516916172.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:12.425Z,1516916172.425 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:36:12.426Z,1516916172.426 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:36:12.427Z,1516916172.427 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:12.676Z,1516916172.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:12.829Z,1516916172.829 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:36:13.032Z,1516916173.032 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:36:13.037Z,1516916173.037 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:13.079Z,1516916173.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:13.479Z,1516916173.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:13.862Z,1516916173.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:14.239Z,1516916174.239 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:36:14.240Z,1516916174.240 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:14.266Z,1516916174.266 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:14.266Z,1516916174.266 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 6
2018-01-25T21:36:14.266Z,1516916174.266 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-25T21:36:14.268Z,1516916174.268 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:14.268Z,1516916174.268 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2018-01-25T21:36:14.268Z,1516916174.268 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-25T21:36:14.294Z,1516916174.294 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:14.294Z,1516916174.294 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-01-25T21:36:14.294Z,1516916174.294 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-25T21:36:14.318Z,1516916174.318 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-25T21:36:14.318Z,1516916174.318 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-25T21:36:14.318Z,1516916174.318 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-25T21:36:14.705Z,1516916174.705 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-25T21:36:14.705Z,1516916174.705 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 6
2018-01-25T21:36:14.705Z,1516916174.705 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-25T21:36:14.705Z,1516916174.705 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2018-01-25T21:36:14.706Z,1516916174.706 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-25T21:36:14.706Z,1516916174.706 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-01-25T21:36:15.074Z,1516916175.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-25T21:36:15.075Z,1516916175.075 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T21:36:15.075Z,1516916175.075 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T21:36:15.076Z,1516916175.076 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-25T21:36:15.076Z,1516916175.076 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T21:36:15.076Z,1516916175.076 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T21:36:15.077Z,1516916175.077 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-25T21:36:15.077Z,1516916175.077 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T21:36:15.078Z,1516916175.078 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T21:36:15.449Z,1516916175.449 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:36:15.473Z,1516916175.473 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:15.486Z,1516916175.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-25T21:36:15.487Z,1516916175.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:15.882Z,1516916175.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-25T21:36:15.883Z,1516916175.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:16.035Z,1516916176.035 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:36:16.036Z,1516916176.036 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:16.273Z,1516916176.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-25T21:36:16.274Z,1516916176.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:16.673Z,1516916176.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-25T21:36:16.674Z,1516916176.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:17.076Z,1516916177.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-25T21:36:17.077Z,1516916177.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:17.238Z,1516916177.238 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:36:17.239Z,1516916177.239 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:17.473Z,1516916177.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-25T21:36:17.474Z,1516916177.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:17.873Z,1516916177.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-25T21:36:17.874Z,1516916177.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:18.281Z,1516916178.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-25T21:36:18.282Z,1516916178.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:18.438Z,1516916178.438 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:36:18.439Z,1516916178.439 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:18.673Z,1516916178.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-25T21:36:18.674Z,1516916178.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:19.041Z,1516916179.041 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:36:19.042Z,1516916179.042 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:19.081Z,1516916179.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-25T21:36:19.082Z,1516916179.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:19.474Z,1516916179.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-25T21:36:19.475Z,1516916179.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:19.864Z,1516916179.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-25T21:36:19.865Z,1516916179.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:20.242Z,1516916180.242 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:36:20.244Z,1516916180.244 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:20.278Z,1516916180.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-25T21:36:20.279Z,1516916180.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:20.677Z,1516916180.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-25T21:36:20.678Z,1516916180.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:21.083Z,1516916181.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-25T21:36:21.084Z,1516916181.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:21.442Z,1516916181.442 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:36:21.443Z,1516916181.443 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:21.517Z,1516916181.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-25T21:36:21.518Z,1516916181.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:21.886Z,1516916181.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-25T21:36:21.887Z,1516916181.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:22.044Z,1516916182.044 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:36:22.046Z,1516916182.046 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:22.274Z,1516916182.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-25T21:36:22.275Z,1516916182.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:22.674Z,1516916182.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-25T21:36:22.675Z,1516916182.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:23.083Z,1516916183.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-25T21:36:23.084Z,1516916183.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:23.246Z,1516916183.246 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:36:23.247Z,1516916183.247 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:23.478Z,1516916183.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-25T21:36:23.479Z,1516916183.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:23.883Z,1516916183.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-25T21:36:23.884Z,1516916183.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:24.288Z,1516916184.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-25T21:36:24.289Z,1516916184.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:24.446Z,1516916184.446 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:36:24.447Z,1516916184.447 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:24.679Z,1516916184.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-25T21:36:24.680Z,1516916184.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:25.061Z,1516916185.061 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:36:25.062Z,1516916185.062 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:25.092Z,1516916185.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-25T21:36:25.097Z,1516916185.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:26.267Z,1516916186.267 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:36:26.268Z,1516916186.268 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:27.052Z,1516916187.052 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:36:27.054Z,1516916187.054 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:28.254Z,1516916188.254 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:36:28.255Z,1516916188.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:28.345Z,1516916188.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-01-25T21:36:28.346Z,1516916188.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:28.478Z,1516916188.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.2 s old, using for 20.0 s.
2018-01-25T21:36:28.479Z,1516916188.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:28.832Z,1516916188.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s.
2018-01-25T21:36:28.833Z,1516916188.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:29.247Z,1516916189.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s.
2018-01-25T21:36:29.248Z,1516916189.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:29.454Z,1516916189.454 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:36:29.455Z,1516916189.455 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:29.615Z,1516916189.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-01-25T21:36:29.616Z,1516916189.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:30.009Z,1516916190.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-01-25T21:36:30.010Z,1516916190.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:30.057Z,1516916190.057 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:36:30.058Z,1516916190.058 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:30.407Z,1516916190.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-01-25T21:36:30.408Z,1516916190.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:30.813Z,1516916190.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-01-25T21:36:30.814Z,1516916190.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:31.215Z,1516916191.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-01-25T21:36:31.216Z,1516916191.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:31.258Z,1516916191.258 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:36:31.259Z,1516916191.259 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:31.622Z,1516916191.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2018-01-25T21:36:31.623Z,1516916191.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:32.019Z,1516916192.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2018-01-25T21:36:32.020Z,1516916192.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:32.405Z,1516916192.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-01-25T21:36:32.406Z,1516916192.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:32.458Z,1516916192.458 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:36:32.460Z,1516916192.460 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:32.825Z,1516916192.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2018-01-25T21:36:32.826Z,1516916192.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:33.061Z,1516916193.061 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:36:33.063Z,1516916193.063 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:33.230Z,1516916193.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2018-01-25T21:36:33.231Z,1516916193.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:33.626Z,1516916193.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2018-01-25T21:36:33.627Z,1516916193.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:34.014Z,1516916194.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-01-25T21:36:34.015Z,1516916194.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:34.262Z,1516916194.262 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:36:34.263Z,1516916194.263 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:34.414Z,1516916194.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:34.825Z,1516916194.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:35.226Z,1516916195.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:35.462Z,1516916195.462 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:36:35.463Z,1516916195.463 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:35.620Z,1516916195.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:36.018Z,1516916196.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:36.068Z,1516916196.068 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:36:36.069Z,1516916196.069 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:36.421Z,1516916196.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:36.829Z,1516916196.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:37.223Z,1516916197.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:37.270Z,1516916197.270 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:36:37.271Z,1516916197.271 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:37.627Z,1516916197.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:37.998Z,1516916197.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:38.401Z,1516916198.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:38.470Z,1516916198.470 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:36:38.471Z,1516916198.471 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:38.829Z,1516916198.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:39.071Z,1516916199.071 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:36:39.072Z,1516916199.072 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:39.226Z,1516916199.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:39.632Z,1516916199.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:40.006Z,1516916200.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:40.272Z,1516916200.272 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:36:40.273Z,1516916200.273 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:40.414Z,1516916200.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:40.838Z,1516916200.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:41.237Z,1516916201.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:41.474Z,1516916201.474 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:36:41.475Z,1516916201.475 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:41.615Z,1516916201.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:42.010Z,1516916202.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:42.075Z,1516916202.075 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:36:42.077Z,1516916202.077 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:42.422Z,1516916202.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:42.826Z,1516916202.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:43.221Z,1516916203.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:43.278Z,1516916203.278 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:36:43.279Z,1516916203.279 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:43.618Z,1516916203.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:44.019Z,1516916204.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:44.415Z,1516916204.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:44.478Z,1516916204.478 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:36:44.479Z,1516916204.479 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:44.819Z,1516916204.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:45.080Z,1516916205.080 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:36:45.081Z,1516916205.081 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:45.226Z,1516916205.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:45.622Z,1516916205.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:46.020Z,1516916206.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:46.282Z,1516916206.282 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:36:46.283Z,1516916206.283 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:46.413Z,1516916206.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:46.842Z,1516916206.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:47.226Z,1516916207.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:47.482Z,1516916207.482 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:36:47.483Z,1516916207.483 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:47.629Z,1516916207.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:48.010Z,1516916208.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:48.085Z,1516916208.085 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:36:48.086Z,1516916208.086 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:48.418Z,1516916208.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:48.823Z,1516916208.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:49.226Z,1516916209.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:49.286Z,1516916209.286 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:36:49.287Z,1516916209.287 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:49.627Z,1516916209.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:50.022Z,1516916210.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:50.413Z,1516916210.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:50.486Z,1516916210.486 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:36:50.487Z,1516916210.487 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:50.820Z,1516916210.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:51.089Z,1516916211.089 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:36:51.090Z,1516916211.090 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:51.227Z,1516916211.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:51.608Z,1516916211.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:52.006Z,1516916212.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:52.290Z,1516916212.290 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:36:52.291Z,1516916212.291 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:52.414Z,1516916212.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:52.820Z,1516916212.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:53.215Z,1516916213.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:53.490Z,1516916213.490 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:36:53.491Z,1516916213.491 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:53.612Z,1516916213.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:54.009Z,1516916214.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:54.094Z,1516916214.094 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:36:54.095Z,1516916214.095 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:54.414Z,1516916214.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:54.818Z,1516916214.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:55.222Z,1516916215.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:55.294Z,1516916215.294 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:36:55.295Z,1516916215.295 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:55.626Z,1516916215.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:56.011Z,1516916216.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:56.418Z,1516916216.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:56.494Z,1516916216.494 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:36:56.495Z,1516916216.495 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:56.834Z,1516916216.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:57.098Z,1516916217.098 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:36:57.100Z,1516916217.100 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:57.223Z,1516916217.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:57.620Z,1516916217.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:58.002Z,1516916218.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:58.298Z,1516916218.298 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:36:58.299Z,1516916218.299 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:58.406Z,1516916218.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:58.816Z,1516916218.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:59.219Z,1516916219.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:36:59.498Z,1516916219.498 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:36:59.499Z,1516916219.499 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:36:59.612Z,1516916219.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:00.015Z,1516916220.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:00.103Z,1516916220.103 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:37:00.105Z,1516916220.105 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:00.411Z,1516916220.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:00.808Z,1516916220.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:01.222Z,1516916221.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:01.306Z,1516916221.306 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:37:01.307Z,1516916221.307 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:01.616Z,1516916221.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:02.022Z,1516916222.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:02.411Z,1516916222.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:02.506Z,1516916222.506 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:37:02.507Z,1516916222.507 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:02.822Z,1516916222.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:03.136Z,1516916223.136 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:37:03.137Z,1516916223.137 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:03.218Z,1516916223.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:03.617Z,1516916223.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:04.028Z,1516916224.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:04.338Z,1516916224.338 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:37:04.339Z,1516916224.339 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:04.419Z,1516916224.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:04.828Z,1516916224.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:05.111Z,1516916225.111 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:37:05.112Z,1516916225.112 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:05.200Z,1516916225.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:05.599Z,1516916225.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:05.998Z,1516916225.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:06.310Z,1516916226.310 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:37:06.311Z,1516916226.311 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:06.419Z,1516916226.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:06.811Z,1516916226.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:07.237Z,1516916227.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:07.510Z,1516916227.510 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:37:07.511Z,1516916227.511 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:07.627Z,1516916227.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:08.015Z,1516916228.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:08.115Z,1516916228.115 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:37:08.117Z,1516916228.117 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:08.407Z,1516916228.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:08.809Z,1516916228.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:09.210Z,1516916229.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:09.318Z,1516916229.318 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:09.319Z,1516916229.319 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:09.610Z,1516916229.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:10.018Z,1516916230.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:10.415Z,1516916230.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:10.518Z,1516916230.518 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:10.519Z,1516916230.519 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:10.816Z,1516916230.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:11.120Z,1516916231.120 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:11.121Z,1516916231.121 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:11.207Z,1516916231.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:11.612Z,1516916231.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:12.009Z,1516916232.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:12.322Z,1516916232.322 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:12.323Z,1516916232.323 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:12.417Z,1516916232.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:12.810Z,1516916232.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:13.228Z,1516916233.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:13.522Z,1516916233.522 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:13.523Z,1516916233.523 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:13.618Z,1516916233.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:14.018Z,1516916234.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:14.125Z,1516916234.125 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:14.126Z,1516916234.126 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:14.414Z,1516916234.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:14.826Z,1516916234.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:15.198Z,1516916235.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:15.326Z,1516916235.326 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:15.327Z,1516916235.327 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:15.623Z,1516916235.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:16.020Z,1516916236.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:16.424Z,1516916236.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:16.526Z,1516916236.526 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:16.527Z,1516916236.527 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:16.827Z,1516916236.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:17.129Z,1516916237.129 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:17.131Z,1516916237.131 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:17.218Z,1516916237.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:17.609Z,1516916237.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:18.014Z,1516916238.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:18.330Z,1516916238.330 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:18.331Z,1516916238.331 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:18.428Z,1516916238.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:18.817Z,1516916238.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:19.214Z,1516916239.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:19.530Z,1516916239.530 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:19.531Z,1516916239.531 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:19.634Z,1516916239.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:20.022Z,1516916240.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:20.134Z,1516916240.134 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:20.136Z,1516916240.136 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:20.418Z,1516916240.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:20.814Z,1516916240.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:21.210Z,1516916241.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:21.334Z,1516916241.334 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:21.335Z,1516916241.335 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:21.615Z,1516916241.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:22.026Z,1516916242.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:22.426Z,1516916242.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:22.534Z,1516916242.534 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:22.536Z,1516916242.536 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:22.818Z,1516916242.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:23.139Z,1516916243.139 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:23.140Z,1516916243.140 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:23.211Z,1516916243.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:23.614Z,1516916243.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:24.014Z,1516916244.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:24.338Z,1516916244.338 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:24.339Z,1516916244.339 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:24.411Z,1516916244.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:24.802Z,1516916244.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:25.228Z,1516916245.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:25.538Z,1516916245.538 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:25.539Z,1516916245.539 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:26.144Z,1516916246.144 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:26.145Z,1516916246.145 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:27.346Z,1516916247.346 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:27.347Z,1516916247.347 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:28.482Z,1516916248.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:28.546Z,1516916248.546 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:28.547Z,1516916248.547 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:28.637Z,1516916248.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:28.941Z,1516916248.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:29.148Z,1516916249.148 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:29.149Z,1516916249.149 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:29.354Z,1516916249.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:29.740Z,1516916249.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:30.163Z,1516916250.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:30.350Z,1516916250.350 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:30.351Z,1516916250.351 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:30.562Z,1516916250.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:30.951Z,1516916250.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:31.340Z,1516916251.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:31.550Z,1516916251.550 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:31.551Z,1516916251.551 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:31.742Z,1516916251.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:32.153Z,1516916252.153 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:32.154Z,1516916252.154 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:32.193Z,1516916252.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:32.550Z,1516916252.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:32.957Z,1516916252.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:33.354Z,1516916253.354 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:33.355Z,1516916253.355 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:33.361Z,1516916253.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:33.763Z,1516916253.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:34.168Z,1516916254.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:34.538Z,1516916254.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:34.554Z,1516916254.554 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:34.555Z,1516916254.555 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:34.946Z,1516916254.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:35.159Z,1516916255.159 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:35.160Z,1516916255.160 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:35.346Z,1516916255.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:35.747Z,1516916255.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:36.179Z,1516916256.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:36.358Z,1516916256.358 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:36.359Z,1516916256.359 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:36.566Z,1516916256.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:36.951Z,1516916256.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:37.347Z,1516916257.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:37.558Z,1516916257.558 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:37.559Z,1516916257.559 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:37.751Z,1516916257.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:38.162Z,1516916258.162 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:38.163Z,1516916258.163 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:38.167Z,1516916258.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:38.547Z,1516916258.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:38.954Z,1516916258.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:39.353Z,1516916259.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:39.362Z,1516916259.362 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:39.363Z,1516916259.363 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:39.751Z,1516916259.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:40.176Z,1516916260.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:40.551Z,1516916260.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:40.562Z,1516916260.562 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:40.563Z,1516916260.563 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:40.951Z,1516916260.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:41.168Z,1516916261.168 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:41.169Z,1516916261.169 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:41.352Z,1516916261.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:41.758Z,1516916261.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:42.181Z,1516916262.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:42.370Z,1516916262.370 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:42.371Z,1516916262.371 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:42.569Z,1516916262.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:42.959Z,1516916262.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:43.332Z,1516916263.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:43.570Z,1516916263.570 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:43.571Z,1516916263.571 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:43.733Z,1516916263.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:44.138Z,1516916264.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:44.171Z,1516916264.171 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:44.173Z,1516916264.173 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:44.540Z,1516916264.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:44.967Z,1516916264.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:45.365Z,1516916265.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:45.374Z,1516916265.374 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:45.375Z,1516916265.375 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:45.763Z,1516916265.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:46.141Z,1516916266.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:46.541Z,1516916266.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:46.574Z,1516916266.574 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:46.576Z,1516916266.576 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:46.945Z,1516916266.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:47.176Z,1516916267.176 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:47.177Z,1516916267.177 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:47.346Z,1516916267.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:47.744Z,1516916267.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:48.163Z,1516916268.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:48.378Z,1516916268.378 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:48.379Z,1516916268.379 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:48.562Z,1516916268.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:48.952Z,1516916268.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:49.340Z,1516916269.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:49.578Z,1516916269.578 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:49.579Z,1516916269.579 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:49.751Z,1516916269.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:50.141Z,1516916270.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:50.181Z,1516916270.181 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:50.182Z,1516916270.182 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:50.540Z,1516916270.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:50.952Z,1516916270.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:51.353Z,1516916271.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:51.382Z,1516916271.382 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:51.383Z,1516916271.383 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:51.753Z,1516916271.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:52.147Z,1516916272.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:52.548Z,1516916272.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:52.590Z,1516916272.590 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:52.592Z,1516916272.592 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:52.955Z,1516916272.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:53.187Z,1516916273.187 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:53.188Z,1516916273.188 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:53.366Z,1516916273.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:53.752Z,1516916273.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:54.150Z,1516916274.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:54.386Z,1516916274.386 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:54.387Z,1516916274.387 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:54.561Z,1516916274.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:54.959Z,1516916274.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:55.363Z,1516916275.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:55.586Z,1516916275.586 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:55.587Z,1516916275.587 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:55.765Z,1516916275.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:56.134Z,1516916276.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:56.190Z,1516916276.190 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:56.191Z,1516916276.191 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:56.544Z,1516916276.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:56.972Z,1516916276.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:57.370Z,1516916277.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:57.390Z,1516916277.390 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:57.391Z,1516916277.391 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:57.744Z,1516916277.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:58.140Z,1516916278.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:58.540Z,1516916278.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:58.590Z,1516916278.590 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:58.591Z,1516916278.591 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:58.954Z,1516916278.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:59.194Z,1516916279.194 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:37:59.196Z,1516916279.196 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:37:59.363Z,1516916279.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:37:59.750Z,1516916279.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:00.145Z,1516916280.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:00.394Z,1516916280.394 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:00.395Z,1516916280.395 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:00.553Z,1516916280.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:00.951Z,1516916280.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:01.355Z,1516916281.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:01.594Z,1516916281.594 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:01.595Z,1516916281.595 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:01.757Z,1516916281.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:02.141Z,1516916282.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:02.199Z,1516916282.199 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:02.200Z,1516916282.201 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:02.544Z,1516916282.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:02.956Z,1516916282.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:03.354Z,1516916283.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:03.402Z,1516916283.402 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:03.403Z,1516916283.403 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:03.756Z,1516916283.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:04.153Z,1516916284.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:04.551Z,1516916284.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:04.602Z,1516916284.602 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:04.603Z,1516916284.603 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:04.957Z,1516916284.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:05.203Z,1516916285.203 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:05.205Z,1516916285.205 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:05.358Z,1516916285.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:05.751Z,1516916285.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:06.158Z,1516916286.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:06.406Z,1516916286.406 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:06.407Z,1516916286.407 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:06.557Z,1516916286.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:06.952Z,1516916286.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:07.355Z,1516916287.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:07.606Z,1516916287.606 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:07.607Z,1516916287.607 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:07.762Z,1516916287.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:08.134Z,1516916288.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:08.208Z,1516916288.208 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:08.210Z,1516916288.210 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:08.558Z,1516916288.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:08.966Z,1516916288.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:09.363Z,1516916289.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:09.410Z,1516916289.410 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:09.411Z,1516916289.411 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:09.763Z,1516916289.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:10.146Z,1516916290.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:10.540Z,1516916290.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:10.610Z,1516916290.610 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:10.611Z,1516916290.611 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:10.948Z,1516916290.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:11.213Z,1516916291.213 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:11.214Z,1516916291.214 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:11.351Z,1516916291.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:11.754Z,1516916291.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:12.144Z,1516916292.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:12.157Z,1516916292.157 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-25T21:38:12.414Z,1516916292.414 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:12.415Z,1516916292.415 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:12.548Z,1516916292.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:12.951Z,1516916292.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:13.353Z,1516916293.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:13.614Z,1516916293.614 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:13.615Z,1516916293.615 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:13.750Z,1516916293.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:14.141Z,1516916294.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:14.218Z,1516916294.218 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:14.219Z,1516916294.219 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:14.544Z,1516916294.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:14.956Z,1516916294.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:15.353Z,1516916295.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:15.418Z,1516916295.418 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:15.419Z,1516916295.419 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:15.754Z,1516916295.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:16.149Z,1516916296.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:16.547Z,1516916296.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:16.618Z,1516916296.618 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:16.619Z,1516916296.619 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:16.953Z,1516916296.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:17.222Z,1516916297.222 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:17.223Z,1516916297.223 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:17.364Z,1516916297.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:17.751Z,1516916297.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:18.151Z,1516916298.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:18.422Z,1516916298.422 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:18.423Z,1516916298.423 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:18.557Z,1516916298.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:18.952Z,1516916298.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:19.355Z,1516916299.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:19.622Z,1516916299.622 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:38:19.623Z,1516916299.623 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:19.757Z,1516916299.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:20.133Z,1516916300.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:20.227Z,1516916300.227 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:20.228Z,1516916300.228 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:20.558Z,1516916300.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:20.966Z,1516916300.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:21.363Z,1516916301.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:21.426Z,1516916301.426 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:21.427Z,1516916301.427 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:21.747Z,1516916301.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:22.142Z,1516916302.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:22.540Z,1516916302.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:22.626Z,1516916302.626 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:22.627Z,1516916302.627 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:22.971Z,1516916302.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:23.232Z,1516916303.232 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:23.233Z,1516916303.233 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:23.351Z,1516916303.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:23.747Z,1516916303.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:24.146Z,1516916304.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:24.149Z,1516916304.149 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-25T21:33:24.1Z
2018-01-25T21:38:24.149Z,1516916304.149 [Default:CheckIn:Read_GPS] Stopped
2018-01-25T21:38:24.150Z,1516916304.150 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-25T21:38:24.434Z,1516916304.434 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:24.435Z,1516916304.435 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:24.554Z,1516916304.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:25.100Z,1516916305.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:25.354Z,1516916305.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:25.634Z,1516916305.634 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:25.635Z,1516916305.635 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:26.236Z,1516916306.236 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:26.237Z,1516916306.237 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:27.438Z,1516916307.438 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:27.439Z,1516916307.439 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:28.607Z,1516916308.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:28.638Z,1516916308.638 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:28.639Z,1516916308.639 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:28.694Z,1516916308.694 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180125T211802/Courier0008.lzma
2018-01-25T21:38:28.754Z,1516916308.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:29.105Z,1516916309.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:29.241Z,1516916309.241 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:29.242Z,1516916309.242 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:29.475Z,1516916309.475 [DataOverHttps](INFO): Moved sent file to Logs/20180125T211802/Courier0008.lzma.bak
2018-01-25T21:38:29.475Z,1516916309.475 [DataOverHttps](INFO): SBD MOMSN=7761282
2018-01-25T21:38:29.534Z,1516916309.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:30.314Z,1516916310.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:30.436Z,1516916310.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:30.442Z,1516916310.442 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:30.443Z,1516916310.443 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:31.643Z,1516916311.643 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:31.644Z,1516916311.644 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:32.246Z,1516916312.246 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:32.247Z,1516916312.247 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:33.446Z,1516916313.446 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:33.447Z,1516916313.447 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:33.670Z,1516916313.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:33.811Z,1516916313.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:34.134Z,1516916314.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:34.531Z,1516916314.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:34.646Z,1516916314.646 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:34.647Z,1516916314.647 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:34.925Z,1516916314.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:35.250Z,1516916315.250 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:35.251Z,1516916315.251 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:35.358Z,1516916315.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:36.450Z,1516916316.450 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:36.451Z,1516916316.451 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:37.650Z,1516916317.650 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:37.651Z,1516916317.651 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:38.255Z,1516916318.255 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:38.256Z,1516916318.256 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:38.636Z,1516916318.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:38.725Z,1516916318.725 [DataOverHttps](INFO): Sending 175 bytes from file Logs/20180125T211802/Express0009.lzma
2018-01-25T21:38:38.787Z,1516916318.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:39.141Z,1516916319.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:39.454Z,1516916319.454 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:39.455Z,1516916319.455 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:39.483Z,1516916319.483 [DataOverHttps](INFO): Moved sent file to Logs/20180125T211802/Express0009.lzma.bak
2018-01-25T21:38:39.483Z,1516916319.483 [DataOverHttps](INFO): SBD MOMSN=7761284
2018-01-25T21:38:39.546Z,1516916319.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:40.247Z,1516916320.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:40.259Z,1516916320.259 [Default:CheckIn:Read_Iridium] Stopped
2018-01-25T21:38:40.259Z,1516916320.259 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-25T21:38:40.259Z,1516916320.259 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-25T21:38:40.364Z,1516916320.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:40.654Z,1516916320.654 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:40.655Z,1516916320.655 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:41.259Z,1516916321.259 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:41.261Z,1516916321.261 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:42.462Z,1516916322.462 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:42.463Z,1516916322.463 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:43.634Z,1516916323.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:43.662Z,1516916323.662 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:43.663Z,1516916323.663 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:43.783Z,1516916323.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:44.109Z,1516916324.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:44.264Z,1516916324.264 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:44.265Z,1516916324.265 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:44.510Z,1516916324.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:44.904Z,1516916324.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:45.322Z,1516916325.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:45.466Z,1516916325.466 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:45.467Z,1516916325.467 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:45.718Z,1516916325.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:46.111Z,1516916326.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:46.500Z,1516916326.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:46.666Z,1516916326.666 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:46.667Z,1516916326.667 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:46.902Z,1516916326.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:47.268Z,1516916327.268 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:47.270Z,1516916327.270 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:47.329Z,1516916327.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:47.705Z,1516916327.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:48.120Z,1516916328.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:48.470Z,1516916328.470 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:38:48.471Z,1516916328.471 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:48.530Z,1516916328.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:48.919Z,1516916328.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:49.331Z,1516916329.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:49.670Z,1516916329.670 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:49.672Z,1516916329.672 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:49.722Z,1516916329.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:50.098Z,1516916330.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:50.273Z,1516916330.273 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:50.275Z,1516916330.275 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:50.498Z,1516916330.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:50.893Z,1516916330.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:51.326Z,1516916331.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:51.474Z,1516916331.474 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:51.475Z,1516916331.475 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:51.725Z,1516916331.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:52.103Z,1516916332.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:52.502Z,1516916332.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:52.674Z,1516916332.674 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:52.675Z,1516916332.675 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:52.903Z,1516916332.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:53.300Z,1516916333.300 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:53.301Z,1516916333.301 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:53.322Z,1516916333.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:53.700Z,1516916333.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:54.118Z,1516916334.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:54.502Z,1516916334.502 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:54.503Z,1516916334.503 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:54.517Z,1516916334.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:54.912Z,1516916334.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:55.281Z,1516916335.281 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:55.283Z,1516916335.283 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:55.349Z,1516916335.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:55.706Z,1516916335.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:56.111Z,1516916336.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:56.482Z,1516916336.482 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:56.483Z,1516916336.483 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:56.519Z,1516916336.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:56.918Z,1516916336.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:57.322Z,1516916337.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:57.682Z,1516916337.682 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:57.683Z,1516916337.683 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:57.748Z,1516916337.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:58.127Z,1516916338.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:58.285Z,1516916338.285 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:58.287Z,1516916338.287 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:58.510Z,1516916338.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:58.904Z,1516916338.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:59.322Z,1516916339.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:38:59.486Z,1516916339.486 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:38:59.487Z,1516916339.487 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:38:59.713Z,1516916339.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:00.114Z,1516916340.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:00.518Z,1516916340.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:00.686Z,1516916340.686 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:00.687Z,1516916340.687 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:00.914Z,1516916340.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:01.293Z,1516916341.293 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:01.295Z,1516916341.295 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:01.334Z,1516916341.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:01.703Z,1516916341.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:02.095Z,1516916342.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:02.495Z,1516916342.495 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:02.496Z,1516916342.496 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:02.501Z,1516916342.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:02.895Z,1516916342.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:03.319Z,1516916343.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:03.695Z,1516916343.695 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:03.696Z,1516916343.696 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:03.735Z,1516916343.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:04.108Z,1516916344.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:04.295Z,1516916344.295 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:04.296Z,1516916344.296 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:04.498Z,1516916344.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:04.898Z,1516916344.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:05.312Z,1516916345.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:05.494Z,1516916345.494 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:05.495Z,1516916345.495 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:05.698Z,1516916345.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:06.107Z,1516916346.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:06.593Z,1516916346.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:06.694Z,1516916346.694 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:06.695Z,1516916346.695 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:06.911Z,1516916346.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:07.304Z,1516916347.304 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:07.306Z,1516916347.306 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:07.314Z,1516916347.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:07.698Z,1516916347.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:08.097Z,1516916348.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:08.506Z,1516916348.506 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:08.507Z,1516916348.507 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:08.531Z,1516916348.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:08.898Z,1516916348.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:09.320Z,1516916349.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:09.706Z,1516916349.706 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:39:09.707Z,1516916349.707 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:09.722Z,1516916349.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:10.114Z,1516916350.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:10.304Z,1516916350.304 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:10.305Z,1516916350.305 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:10.511Z,1516916350.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:10.911Z,1516916350.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:11.323Z,1516916351.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:11.506Z,1516916351.506 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:11.507Z,1516916351.507 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:11.711Z,1516916351.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:12.122Z,1516916352.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:12.517Z,1516916352.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:12.706Z,1516916352.706 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:12.707Z,1516916352.707 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:12.917Z,1516916352.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:13.309Z,1516916353.309 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:13.310Z,1516916353.310 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:13.339Z,1516916353.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:13.698Z,1516916353.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:14.098Z,1516916354.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:14.510Z,1516916354.510 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:14.511Z,1516916354.511 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:14.526Z,1516916354.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:14.900Z,1516916354.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:15.331Z,1516916355.331 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:15.331Z,1516916355.331 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 7
2018-01-25T21:39:15.331Z,1516916355.331 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-25T21:39:15.333Z,1516916355.333 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:15.333Z,1516916355.333 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2018-01-25T21:39:15.333Z,1516916355.333 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-25T21:39:15.335Z,1516916355.335 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:15.335Z,1516916355.335 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-01-25T21:39:15.335Z,1516916355.335 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-25T21:39:15.347Z,1516916355.347 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-25T21:39:15.347Z,1516916355.347 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-25T21:39:15.348Z,1516916355.348 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-25T21:39:15.710Z,1516916355.710 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:15.711Z,1516916355.711 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:15.755Z,1516916355.755 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-25T21:39:15.755Z,1516916355.755 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 7
2018-01-25T21:39:15.756Z,1516916355.756 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-25T21:39:15.756Z,1516916355.756 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2018-01-25T21:39:15.756Z,1516916355.756 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-25T21:39:15.757Z,1516916355.757 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-01-25T21:39:16.103Z,1516916356.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-25T21:39:16.103Z,1516916356.103 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T21:39:16.103Z,1516916356.103 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T21:39:16.104Z,1516916356.104 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-25T21:39:16.104Z,1516916356.104 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T21:39:16.105Z,1516916356.105 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T21:39:16.105Z,1516916356.105 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-25T21:39:16.105Z,1516916356.105 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T21:39:16.106Z,1516916356.106 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T21:39:16.313Z,1516916356.313 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:16.315Z,1516916356.315 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:16.510Z,1516916356.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-25T21:39:16.511Z,1516916356.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:16.909Z,1516916356.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-25T21:39:16.910Z,1516916356.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:17.338Z,1516916357.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-25T21:39:17.339Z,1516916357.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:17.514Z,1516916357.514 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:17.515Z,1516916357.515 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:17.700Z,1516916357.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-25T21:39:17.701Z,1516916357.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:18.116Z,1516916358.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-25T21:39:18.121Z,1516916358.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:18.514Z,1516916358.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-25T21:39:18.515Z,1516916358.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:18.714Z,1516916358.714 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:18.715Z,1516916358.715 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:18.914Z,1516916358.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-25T21:39:18.915Z,1516916358.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:19.318Z,1516916359.318 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:19.319Z,1516916359.319 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:19.330Z,1516916359.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-25T21:39:19.331Z,1516916359.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:19.704Z,1516916359.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-25T21:39:19.705Z,1516916359.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:20.103Z,1516916360.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-25T21:39:20.108Z,1516916360.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:20.511Z,1516916360.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-25T21:39:20.512Z,1516916360.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:20.518Z,1516916360.518 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:20.519Z,1516916360.519 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:20.910Z,1516916360.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-25T21:39:20.911Z,1516916360.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:21.336Z,1516916361.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-25T21:39:21.337Z,1516916361.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:21.718Z,1516916361.718 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:21.719Z,1516916361.719 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:21.725Z,1516916361.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-25T21:39:21.726Z,1516916361.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:22.111Z,1516916362.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-25T21:39:22.112Z,1516916362.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:22.322Z,1516916362.322 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:22.324Z,1516916362.324 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:22.510Z,1516916362.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-25T21:39:22.511Z,1516916362.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:22.912Z,1516916362.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-25T21:39:22.913Z,1516916362.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:23.331Z,1516916363.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-25T21:39:23.332Z,1516916363.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:23.522Z,1516916363.522 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:23.523Z,1516916363.523 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:23.717Z,1516916363.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-25T21:39:23.718Z,1516916363.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:24.113Z,1516916364.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-25T21:39:24.114Z,1516916364.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:24.514Z,1516916364.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-25T21:39:24.515Z,1516916364.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:24.722Z,1516916364.722 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:24.723Z,1516916364.723 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:24.915Z,1516916364.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-25T21:39:24.916Z,1516916364.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:25.327Z,1516916365.327 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:25.329Z,1516916365.329 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:25.331Z,1516916365.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-25T21:39:25.332Z,1516916365.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:25.706Z,1516916365.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-25T21:39:25.707Z,1516916365.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:26.096Z,1516916366.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-25T21:39:26.101Z,1516916366.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:26.505Z,1516916366.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-25T21:39:26.506Z,1516916366.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:26.530Z,1516916366.530 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:26.531Z,1516916366.531 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:26.900Z,1516916366.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-25T21:39:26.901Z,1516916366.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:27.327Z,1516916367.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-25T21:39:27.331Z,1516916367.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:27.717Z,1516916367.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-25T21:39:27.718Z,1516916367.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:27.730Z,1516916367.730 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:27.731Z,1516916367.731 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:28.113Z,1516916368.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-25T21:39:28.114Z,1516916368.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:28.332Z,1516916368.332 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:28.333Z,1516916368.333 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:28.504Z,1516916368.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-25T21:39:28.505Z,1516916368.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:28.906Z,1516916368.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-25T21:39:28.907Z,1516916368.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:29.318Z,1516916369.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-25T21:39:29.322Z,1516916369.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:29.534Z,1516916369.534 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:29.535Z,1516916369.535 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:29.706Z,1516916369.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-25T21:39:29.707Z,1516916369.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:30.111Z,1516916370.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-25T21:39:30.112Z,1516916370.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:30.513Z,1516916370.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-25T21:39:30.514Z,1516916370.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:30.734Z,1516916370.734 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:30.735Z,1516916370.735 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:30.915Z,1516916370.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-25T21:39:30.916Z,1516916370.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:31.319Z,1516916371.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-25T21:39:31.323Z,1516916371.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:31.336Z,1516916371.336 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:31.338Z,1516916371.338 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:31.710Z,1516916371.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-25T21:39:31.711Z,1516916371.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:32.110Z,1516916372.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-25T21:39:32.111Z,1516916372.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:32.511Z,1516916372.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-25T21:39:32.512Z,1516916372.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:32.538Z,1516916372.538 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:39:32.539Z,1516916372.539 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:32.910Z,1516916372.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-25T21:39:32.911Z,1516916372.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:33.317Z,1516916373.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-25T21:39:33.320Z,1516916373.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:33.716Z,1516916373.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-25T21:39:33.717Z,1516916373.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:33.738Z,1516916373.738 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:33.739Z,1516916373.739 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:34.111Z,1516916374.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-25T21:39:34.112Z,1516916374.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:34.341Z,1516916374.341 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:34.343Z,1516916374.343 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:34.514Z,1516916374.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-25T21:39:34.515Z,1516916374.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:34.918Z,1516916374.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-25T21:39:34.919Z,1516916374.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:35.293Z,1516916375.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-25T21:39:35.294Z,1516916375.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:35.542Z,1516916375.542 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:35.543Z,1516916375.543 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:35.716Z,1516916375.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:36.066Z,1516916376.066 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-25T21:39:36.066Z,1516916376.066 [NAL9602] Data Fault, FailCount= 2
2018-01-25T21:39:36.066Z,1516916376.066 [NAL9602](ERROR): Data Fault
2018-01-25T21:39:36.098Z,1516916376.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:36.131Z,1516916376.131 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-25T21:39:36.466Z,1516916376.466 [NAL9602](INFO): Powering down
2018-01-25T21:39:36.497Z,1516916376.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:36.742Z,1516916376.742 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:36.744Z,1516916376.744 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:36.910Z,1516916376.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:37.303Z,1516916377.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:37.317Z,1516916377.317 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-25T21:39:37.317Z,1516916377.317 [NAL9602] No Fault, FailCount= 2
2018-01-25T21:39:37.346Z,1516916377.346 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:39:37.347Z,1516916377.347 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:37.700Z,1516916377.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:38.106Z,1516916378.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:38.502Z,1516916378.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:38.546Z,1516916378.546 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:38.547Z,1516916378.547 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:38.907Z,1516916378.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:39.306Z,1516916379.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:39.710Z,1516916379.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:39.746Z,1516916379.746 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:39.748Z,1516916379.748 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:40.109Z,1516916380.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:40.350Z,1516916380.350 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:40.352Z,1516916380.352 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:40.519Z,1516916380.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:40.913Z,1516916380.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:41.550Z,1516916381.550 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:41.551Z,1516916381.551 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:42.750Z,1516916382.750 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:42.752Z,1516916382.752 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:43.356Z,1516916383.356 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:43.357Z,1516916383.357 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:44.570Z,1516916384.570 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:44.571Z,1516916384.571 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:45.358Z,1516916385.358 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:45.360Z,1516916385.360 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:45.815Z,1516916385.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:45.978Z,1516916385.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:46.361Z,1516916386.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:46.558Z,1516916386.558 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:46.559Z,1516916386.559 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:46.738Z,1516916386.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:47.118Z,1516916387.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:47.508Z,1516916387.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:47.758Z,1516916387.758 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:39:47.759Z,1516916387.759 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:47.927Z,1516916387.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:48.350Z,1516916388.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:48.363Z,1516916388.363 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:48.364Z,1516916388.364 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:48.731Z,1516916388.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:49.126Z,1516916389.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:49.533Z,1516916389.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:49.566Z,1516916389.566 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:49.567Z,1516916389.567 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:49.935Z,1516916389.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:50.335Z,1516916390.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:50.734Z,1516916390.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:50.766Z,1516916390.766 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:50.767Z,1516916390.767 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:51.137Z,1516916391.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:51.368Z,1516916391.368 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:51.369Z,1516916391.369 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:51.537Z,1516916391.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:51.927Z,1516916391.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:52.339Z,1516916392.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:52.570Z,1516916392.570 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:52.572Z,1516916392.572 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:52.739Z,1516916392.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:53.142Z,1516916393.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:53.518Z,1516916393.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:53.770Z,1516916393.770 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:53.771Z,1516916393.771 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:53.912Z,1516916393.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:54.312Z,1516916394.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:54.372Z,1516916394.372 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:54.373Z,1516916394.373 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:54.718Z,1516916394.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:55.121Z,1516916395.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:55.521Z,1516916395.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:55.574Z,1516916395.574 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:55.575Z,1516916395.575 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:55.918Z,1516916395.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:56.312Z,1516916396.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:56.712Z,1516916396.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:56.774Z,1516916396.774 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:56.775Z,1516916396.775 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:57.123Z,1516916397.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:57.378Z,1516916397.378 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:57.379Z,1516916397.379 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:57.518Z,1516916397.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:57.916Z,1516916397.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:58.324Z,1516916398.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:58.578Z,1516916398.578 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:58.579Z,1516916398.579 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:58.726Z,1516916398.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:59.125Z,1516916399.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:59.510Z,1516916399.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:39:59.778Z,1516916399.778 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:39:59.779Z,1516916399.779 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:39:59.910Z,1516916399.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:00.310Z,1516916400.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:00.382Z,1516916400.382 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:40:00.384Z,1516916400.384 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:00.713Z,1516916400.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:01.109Z,1516916401.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:01.518Z,1516916401.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:01.583Z,1516916401.583 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:40:01.584Z,1516916401.584 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:01.915Z,1516916401.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:02.314Z,1516916402.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:02.716Z,1516916402.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:02.784Z,1516916402.784 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:40:02.786Z,1516916402.786 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:03.111Z,1516916403.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:03.386Z,1516916403.386 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:40:03.387Z,1516916403.387 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:03.517Z,1516916403.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:03.915Z,1516916403.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:04.322Z,1516916404.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:04.586Z,1516916404.586 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:40:04.587Z,1516916404.587 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:04.716Z,1516916404.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:05.118Z,1516916405.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:05.522Z,1516916405.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:05.786Z,1516916405.786 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:40:05.787Z,1516916405.787 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:05.922Z,1516916405.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:06.314Z,1516916406.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:06.391Z,1516916406.391 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:40:06.392Z,1516916406.392 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:06.674Z,1516916406.674 [NAL9602](INFO): Powering up NAL9602
2018-01-25T21:40:06.729Z,1516916406.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:07.113Z,1516916407.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:07.523Z,1516916407.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:07.590Z,1516916407.590 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:40:07.591Z,1516916407.591 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:07.924Z,1516916407.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:08.323Z,1516916408.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:08.723Z,1516916408.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:08.790Z,1516916408.790 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:40:08.791Z,1516916408.791 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:09.131Z,1516916409.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:09.395Z,1516916409.395 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:40:09.396Z,1516916409.396 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:09.504Z,1516916409.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:09.910Z,1516916409.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:10.310Z,1516916410.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:10.598Z,1516916410.598 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:40:10.599Z,1516916410.599 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:10.714Z,1516916410.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:11.109Z,1516916411.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:11.514Z,1516916411.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:11.798Z,1516916411.798 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:40:11.799Z,1516916411.799 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:11.907Z,1516916411.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:12.312Z,1516916412.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:12.400Z,1516916412.400 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:40:12.401Z,1516916412.401 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:12.711Z,1516916412.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:13.111Z,1516916413.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:13.512Z,1516916413.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:13.602Z,1516916413.602 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:40:13.603Z,1516916413.603 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:13.912Z,1516916413.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:14.311Z,1516916414.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:14.712Z,1516916414.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:14.802Z,1516916414.802 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:40:14.804Z,1516916414.804 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:15.111Z,1516916415.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:15.432Z,1516916415.432 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:40:15.434Z,1516916415.434 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:15.535Z,1516916415.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:15.921Z,1516916415.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:16.319Z,1516916416.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:16.635Z,1516916416.635 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:40:16.637Z,1516916416.637 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:16.730Z,1516916416.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:17.116Z,1516916417.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:17.407Z,1516916417.407 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:40:17.409Z,1516916417.409 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:17.521Z,1516916417.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:17.874Z,1516916417.874 [NAL9602](INFO): NAL9602 initialized
2018-01-25T21:40:17.917Z,1516916417.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:18.322Z,1516916418.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:18.610Z,1516916418.610 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:40:18.611Z,1516916418.611 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:18.734Z,1516916418.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:19.125Z,1516916419.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:19.524Z,1516916419.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:19.810Z,1516916419.810 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:40:19.811Z,1516916419.811 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:19.922Z,1516916419.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:20.313Z,1516916420.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:20.412Z,1516916420.412 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:40:20.413Z,1516916420.413 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:20.724Z,1516916420.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:21.120Z,1516916421.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:21.521Z,1516916421.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:21.614Z,1516916421.614 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:40:21.615Z,1516916421.615 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:21.930Z,1516916421.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:22.334Z,1516916422.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:22.717Z,1516916422.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:22.814Z,1516916422.814 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:40:22.815Z,1516916422.815 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:23.124Z,1516916423.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:23.417Z,1516916423.417 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:40:23.418Z,1516916423.418 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:23.518Z,1516916423.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:23.917Z,1516916423.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:24.330Z,1516916424.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:24.618Z,1516916424.618 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:40:24.619Z,1516916424.619 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:24.730Z,1516916424.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:25.135Z,1516916425.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:25.523Z,1516916425.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:25.818Z,1516916425.818 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:40:25.819Z,1516916425.819 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:25.911Z,1516916425.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:26.312Z,1516916426.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:26.421Z,1516916426.421 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:40:26.423Z,1516916426.423 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:26.724Z,1516916426.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:27.122Z,1516916427.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:27.522Z,1516916427.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:27.622Z,1516916427.622 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:40:27.623Z,1516916427.623 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:27.934Z,1516916427.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:28.331Z,1516916428.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:28.712Z,1516916428.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:28.822Z,1516916428.822 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:40:28.823Z,1516916428.823 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:29.124Z,1516916429.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:29.426Z,1516916429.426 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:40:29.427Z,1516916429.427 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:29.520Z,1516916429.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:29.913Z,1516916429.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:30.334Z,1516916430.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:30.626Z,1516916430.626 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:40:30.627Z,1516916430.627 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:30.730Z,1516916430.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:31.134Z,1516916431.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:31.539Z,1516916431.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:31.828Z,1516916431.828 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:40:31.829Z,1516916431.829 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:31.924Z,1516916431.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:32.312Z,1516916432.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:32.431Z,1516916432.431 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:40:32.432Z,1516916432.432 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:32.716Z,1516916432.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:33.113Z,1516916433.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:33.526Z,1516916433.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:33.630Z,1516916433.630 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:40:33.631Z,1516916433.631 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:33.930Z,1516916433.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:34.334Z,1516916434.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:34.753Z,1516916434.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:34.830Z,1516916434.830 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:40:34.831Z,1516916434.831 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:35.123Z,1516916435.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:35.435Z,1516916435.435 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:40:35.437Z,1516916435.437 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:35.522Z,1516916435.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:35.930Z,1516916435.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:36.330Z,1516916436.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:36.638Z,1516916436.638 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:40:36.639Z,1516916436.639 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:36.734Z,1516916436.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:37.121Z,1516916437.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:37.534Z,1516916437.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:37.838Z,1516916437.838 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:40:37.839Z,1516916437.839 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:37.919Z,1516916437.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:38.323Z,1516916438.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:38.440Z,1516916438.440 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:40:38.441Z,1516916438.441 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:38.730Z,1516916438.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:39.130Z,1516916439.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:39.528Z,1516916439.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:39.642Z,1516916439.642 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:40:39.643Z,1516916439.643 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:39.940Z,1516916439.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:40.336Z,1516916440.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:40.707Z,1516916440.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:40.842Z,1516916440.842 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:40:40.843Z,1516916440.843 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:41.113Z,1516916441.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:41.445Z,1516916441.445 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:40:41.446Z,1516916441.446 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:42.646Z,1516916442.646 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:40:42.647Z,1516916442.647 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:43.846Z,1516916443.846 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:40:43.847Z,1516916443.847 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:44.358Z,1516916444.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:44.450Z,1516916444.450 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:40:44.451Z,1516916444.451 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:44.510Z,1516916444.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:44.856Z,1516916444.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:45.247Z,1516916445.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:45.634Z,1516916445.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:45.650Z,1516916445.650 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:40:45.651Z,1516916445.651 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:46.025Z,1516916446.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:46.447Z,1516916446.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:46.827Z,1516916446.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:46.850Z,1516916446.850 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:40:46.851Z,1516916446.851 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:47.232Z,1516916447.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:47.454Z,1516916447.454 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:40:47.455Z,1516916447.455 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:47.644Z,1516916447.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:48.036Z,1516916448.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:48.460Z,1516916448.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:48.654Z,1516916448.654 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:40:48.655Z,1516916448.655 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:48.830Z,1516916448.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:49.214Z,1516916449.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:49.618Z,1516916449.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:49.854Z,1516916449.854 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:40:49.855Z,1516916449.855 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:50.048Z,1516916450.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:50.459Z,1516916450.459 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:40:50.460Z,1516916450.460 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:50.473Z,1516916450.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:50.845Z,1516916450.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:51.250Z,1516916451.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:51.623Z,1516916451.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:51.658Z,1516916451.658 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:40:51.659Z,1516916451.659 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:52.026Z,1516916452.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:52.458Z,1516916452.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:52.833Z,1516916452.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:52.858Z,1516916452.858 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:40:52.859Z,1516916452.859 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:53.258Z,1516916453.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:53.463Z,1516916453.463 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:40:53.464Z,1516916453.464 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:53.635Z,1516916453.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:54.023Z,1516916454.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:54.469Z,1516916454.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:54.666Z,1516916454.666 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:40:54.667Z,1516916454.667 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:54.840Z,1516916454.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:55.236Z,1516916455.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:55.626Z,1516916455.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:55.866Z,1516916455.866 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:40:55.867Z,1516916455.867 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:56.031Z,1516916456.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:56.448Z,1516916456.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:56.472Z,1516916456.472 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:40:56.473Z,1516916456.473 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:56.843Z,1516916456.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:57.246Z,1516916457.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:57.631Z,1516916457.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:57.674Z,1516916457.674 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:40:57.675Z,1516916457.675 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:58.035Z,1516916458.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:58.451Z,1516916458.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:58.842Z,1516916458.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:58.874Z,1516916458.874 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:40:58.875Z,1516916458.875 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:59.244Z,1516916459.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:40:59.472Z,1516916459.472 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:40:59.474Z,1516916459.474 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:40:59.643Z,1516916459.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:00.013Z,1516916460.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:00.445Z,1516916460.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:00.674Z,1516916460.674 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:00.675Z,1516916460.675 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:00.851Z,1516916460.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:01.231Z,1516916461.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:01.626Z,1516916461.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:01.874Z,1516916461.874 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:01.875Z,1516916461.875 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:02.024Z,1516916462.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:02.432Z,1516916462.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:02.477Z,1516916462.477 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:02.478Z,1516916462.478 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:02.831Z,1516916462.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:03.231Z,1516916463.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:03.623Z,1516916463.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:03.678Z,1516916463.678 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:03.679Z,1516916463.679 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:04.026Z,1516916464.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:04.434Z,1516916464.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:04.838Z,1516916464.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:04.878Z,1516916464.878 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:04.879Z,1516916464.879 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:05.238Z,1516916465.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:05.482Z,1516916465.482 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:05.483Z,1516916465.483 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:05.633Z,1516916465.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:06.030Z,1516916466.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:06.434Z,1516916466.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:06.682Z,1516916466.682 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:06.683Z,1516916466.683 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:06.846Z,1516916466.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:07.236Z,1516916467.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:07.630Z,1516916467.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:07.882Z,1516916467.882 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:07.883Z,1516916467.883 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:08.035Z,1516916468.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:08.435Z,1516916468.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:08.486Z,1516916468.486 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:08.488Z,1516916468.488 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:08.842Z,1516916468.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:09.246Z,1516916469.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:09.631Z,1516916469.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:09.686Z,1516916469.686 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:09.687Z,1516916469.687 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:10.031Z,1516916470.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:10.450Z,1516916470.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:10.838Z,1516916470.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:10.886Z,1516916470.886 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:10.888Z,1516916470.888 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:11.243Z,1516916471.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:11.491Z,1516916471.491 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:11.492Z,1516916471.492 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:11.642Z,1516916471.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:12.013Z,1516916472.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:12.439Z,1516916472.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:12.690Z,1516916472.690 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:12.691Z,1516916472.691 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:12.846Z,1516916472.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:13.231Z,1516916473.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:13.626Z,1516916473.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:13.890Z,1516916473.890 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:13.891Z,1516916473.891 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:14.026Z,1516916474.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:14.428Z,1516916474.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:14.496Z,1516916474.496 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:14.497Z,1516916474.497 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:14.838Z,1516916474.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:15.234Z,1516916475.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:15.622Z,1516916475.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:15.698Z,1516916475.698 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:15.699Z,1516916475.699 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:16.033Z,1516916476.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:16.425Z,1516916476.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:16.838Z,1516916476.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:16.899Z,1516916476.899 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:16.901Z,1516916476.901 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:17.236Z,1516916477.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:17.502Z,1516916477.502 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:17.503Z,1516916477.503 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:17.642Z,1516916477.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:18.030Z,1516916478.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:18.426Z,1516916478.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:18.703Z,1516916478.703 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:18.704Z,1516916478.704 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:18.828Z,1516916478.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:19.226Z,1516916479.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:19.638Z,1516916479.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:19.902Z,1516916479.902 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:19.903Z,1516916479.903 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:20.038Z,1516916480.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:20.435Z,1516916480.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:20.505Z,1516916480.505 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:20.506Z,1516916480.506 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:20.831Z,1516916480.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:21.231Z,1516916481.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:21.622Z,1516916481.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:21.706Z,1516916481.706 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:21.707Z,1516916481.707 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:22.035Z,1516916482.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:22.437Z,1516916482.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:22.846Z,1516916482.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:22.906Z,1516916482.906 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:22.907Z,1516916482.907 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:23.242Z,1516916483.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:23.510Z,1516916483.510 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:23.511Z,1516916483.511 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:23.646Z,1516916483.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:24.017Z,1516916484.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:24.413Z,1516916484.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:24.710Z,1516916484.710 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:24.711Z,1516916484.711 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:24.845Z,1516916484.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:25.222Z,1516916485.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:25.627Z,1516916485.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:25.910Z,1516916485.910 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:25.911Z,1516916485.911 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:26.047Z,1516916486.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:26.431Z,1516916486.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:26.514Z,1516916486.514 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:26.516Z,1516916486.516 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:26.834Z,1516916486.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:27.229Z,1516916487.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:27.625Z,1516916487.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:27.714Z,1516916487.714 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:27.715Z,1516916487.715 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:28.027Z,1516916488.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:28.431Z,1516916488.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:28.842Z,1516916488.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:28.915Z,1516916488.915 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:28.917Z,1516916488.917 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:29.249Z,1516916489.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:29.519Z,1516916489.519 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:29.520Z,1516916489.520 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:29.635Z,1516916489.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:30.034Z,1516916490.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:30.434Z,1516916490.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:30.718Z,1516916490.718 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:30.719Z,1516916490.719 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:30.839Z,1516916490.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:31.242Z,1516916491.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:31.647Z,1516916491.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:31.918Z,1516916491.918 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:31.919Z,1516916491.919 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:32.052Z,1516916492.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:32.439Z,1516916492.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:32.523Z,1516916492.523 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:32.525Z,1516916492.525 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:32.822Z,1516916492.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:33.218Z,1516916493.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:33.626Z,1516916493.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:33.726Z,1516916493.726 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:33.727Z,1516916493.727 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:34.026Z,1516916494.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:34.426Z,1516916494.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:34.849Z,1516916494.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:34.926Z,1516916494.926 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:34.927Z,1516916494.927 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:35.250Z,1516916495.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:35.528Z,1516916495.528 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:35.529Z,1516916495.529 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:35.631Z,1516916495.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:36.030Z,1516916496.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:36.423Z,1516916496.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:36.730Z,1516916496.730 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:36.731Z,1516916496.731 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:36.850Z,1516916496.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:37.228Z,1516916497.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:37.628Z,1516916497.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:37.930Z,1516916497.930 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:37.931Z,1516916497.931 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:38.032Z,1516916498.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:38.428Z,1516916498.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:38.533Z,1516916498.533 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:38.534Z,1516916498.534 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:38.829Z,1516916498.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:39.224Z,1516916499.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:39.623Z,1516916499.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:39.734Z,1516916499.734 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:39.735Z,1516916499.735 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:40.028Z,1516916500.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:40.426Z,1516916500.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:40.840Z,1516916500.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:40.934Z,1516916500.934 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:40.935Z,1516916500.935 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:41.240Z,1516916501.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:41.537Z,1516916501.537 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:41.539Z,1516916501.539 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:42.738Z,1516916502.738 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:42.739Z,1516916502.739 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:43.938Z,1516916503.938 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:43.939Z,1516916503.939 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:44.475Z,1516916504.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:44.542Z,1516916504.542 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:44.543Z,1516916504.543 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:44.623Z,1516916504.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:44.947Z,1516916504.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:45.340Z,1516916505.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:45.738Z,1516916505.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:45.742Z,1516916505.742 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:45.743Z,1516916505.743 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:46.147Z,1516916506.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:46.567Z,1516916506.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:46.942Z,1516916506.942 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:46.943Z,1516916506.943 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:46.952Z,1516916506.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:47.359Z,1516916507.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:47.546Z,1516916507.546 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T21:41:47.548Z,1516916507.548 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:47.749Z,1516916507.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:48.147Z,1516916508.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:48.566Z,1516916508.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:48.746Z,1516916508.746 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T21:41:48.747Z,1516916508.747 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:48.959Z,1516916508.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:49.334Z,1516916509.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:49.757Z,1516916509.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:49.946Z,1516916509.946 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:49.947Z,1516916509.947 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:50.161Z,1516916510.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:50.557Z,1516916510.557 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:50.558Z,1516916510.558 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:50.570Z,1516916510.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:50.946Z,1516916510.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:51.342Z,1516916511.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:51.746Z,1516916511.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:51.758Z,1516916511.758 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T21:41:51.759Z,1516916511.759 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:52.134Z,1516916512.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:52.556Z,1516916512.556 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:52.557Z,1516916512.557 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:52.588Z,1516916512.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:52.948Z,1516916512.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:53.345Z,1516916513.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:53.742Z,1516916513.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:53.758Z,1516916513.758 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T21:41:53.759Z,1516916513.759 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:54.136Z,1516916514.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:54.573Z,1516916514.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:54.954Z,1516916514.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:54.958Z,1516916514.958 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:54.959Z,1516916514.959 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:55.349Z,1516916515.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:55.559Z,1516916515.559 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T21:41:55.560Z,1516916515.560 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:55.741Z,1516916515.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:56.148Z,1516916516.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:56.571Z,1516916516.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:56.758Z,1516916516.758 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:56.759Z,1516916516.759 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:56.955Z,1516916516.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:57.347Z,1516916517.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:57.743Z,1516916517.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:57.958Z,1516916517.958 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T21:41:57.959Z,1516916517.959 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:58.140Z,1516916518.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:58.564Z,1516916518.564 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T21:41:58.565Z,1516916518.565 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:41:58.572Z,1516916518.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:58.950Z,1516916518.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:59.347Z,1516916519.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:59.749Z,1516916519.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:41:59.766Z,1516916519.766 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:41:59.767Z,1516916519.767 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:00.147Z,1516916520.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:00.570Z,1516916520.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:00.958Z,1516916520.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:00.966Z,1516916520.966 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:00.967Z,1516916520.967 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:01.347Z,1516916521.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:01.596Z,1516916521.596 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:01.597Z,1516916521.597 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:01.751Z,1516916521.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:02.155Z,1516916522.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:02.575Z,1516916522.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:02.798Z,1516916522.798 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:02.799Z,1516916522.799 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:02.955Z,1516916522.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:03.356Z,1516916523.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:03.571Z,1516916523.571 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:03.573Z,1516916523.573 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:03.734Z,1516916523.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:04.134Z,1516916524.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:04.583Z,1516916524.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:04.774Z,1516916524.774 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:04.775Z,1516916524.775 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:04.958Z,1516916524.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:05.354Z,1516916525.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:05.762Z,1516916525.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:05.974Z,1516916525.974 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:05.975Z,1516916525.975 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:06.136Z,1516916526.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:06.576Z,1516916526.576 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:06.577Z,1516916526.577 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:06.582Z,1516916526.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:06.964Z,1516916526.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:07.343Z,1516916527.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:07.738Z,1516916527.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:07.778Z,1516916527.778 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:07.779Z,1516916527.779 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:08.135Z,1516916528.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:08.544Z,1516916528.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:08.944Z,1516916528.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:08.978Z,1516916528.978 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T21:42:08.980Z,1516916528.980 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:09.346Z,1516916529.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:09.580Z,1516916529.580 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:09.583Z,1516916529.583 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:09.744Z,1516916529.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:10.136Z,1516916530.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:10.546Z,1516916530.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:10.782Z,1516916530.782 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:10.784Z,1516916530.784 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:10.953Z,1516916530.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:11.359Z,1516916531.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:11.747Z,1516916531.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:11.983Z,1516916531.983 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T21:42:11.984Z,1516916531.984 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:12.141Z,1516916532.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:12.548Z,1516916532.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:12.585Z,1516916532.585 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:12.587Z,1516916532.587 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:12.950Z,1516916532.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:13.349Z,1516916533.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:13.741Z,1516916533.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:13.786Z,1516916533.786 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:13.787Z,1516916533.787 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:14.154Z,1516916534.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:14.547Z,1516916534.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:14.957Z,1516916534.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:14.986Z,1516916534.986 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:14.988Z,1516916534.988 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:15.356Z,1516916535.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:15.590Z,1516916535.590 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T21:42:15.591Z,1516916535.591 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:15.754Z,1516916535.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:16.134Z,1516916536.134 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:16.134Z,1516916536.134 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 8
2018-01-25T21:42:16.134Z,1516916536.134 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-25T21:42:16.136Z,1516916536.136 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:16.136Z,1516916536.136 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2018-01-25T21:42:16.136Z,1516916536.136 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-25T21:42:16.138Z,1516916536.138 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:16.138Z,1516916536.138 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-01-25T21:42:16.138Z,1516916536.138 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-25T21:42:16.182Z,1516916536.182 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-25T21:42:16.182Z,1516916536.182 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-25T21:42:16.182Z,1516916536.182 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-25T21:42:16.605Z,1516916536.605 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-25T21:42:16.605Z,1516916536.605 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 8
2018-01-25T21:42:16.606Z,1516916536.606 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-25T21:42:16.606Z,1516916536.606 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2018-01-25T21:42:16.606Z,1516916536.606 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-25T21:42:16.607Z,1516916536.607 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-01-25T21:42:16.790Z,1516916536.790 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:16.791Z,1516916536.791 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:16.946Z,1516916536.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-25T21:42:16.947Z,1516916536.947 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T21:42:16.947Z,1516916536.947 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T21:42:16.947Z,1516916536.947 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-25T21:42:16.948Z,1516916536.948 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T21:42:16.948Z,1516916536.948 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T21:42:16.949Z,1516916536.949 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-25T21:42:16.949Z,1516916536.949 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T21:42:16.949Z,1516916536.949 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T21:42:17.358Z,1516916537.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-25T21:42:17.359Z,1516916537.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:17.745Z,1516916537.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-25T21:42:17.746Z,1516916537.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:17.990Z,1516916537.990 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T21:42:17.991Z,1516916537.991 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:18.137Z,1516916538.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-25T21:42:18.138Z,1516916538.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:18.546Z,1516916538.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-25T21:42:18.547Z,1516916538.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:18.595Z,1516916538.595 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:18.596Z,1516916538.596 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:18.956Z,1516916538.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-25T21:42:18.957Z,1516916538.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:19.347Z,1516916539.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-25T21:42:19.348Z,1516916539.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:19.738Z,1516916539.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-25T21:42:19.739Z,1516916539.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:19.794Z,1516916539.794 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:19.795Z,1516916539.795 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:20.148Z,1516916540.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-25T21:42:20.149Z,1516916540.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:20.547Z,1516916540.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-25T21:42:20.548Z,1516916540.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:20.955Z,1516916540.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-25T21:42:20.956Z,1516916540.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:20.994Z,1516916540.994 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:20.996Z,1516916540.996 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:21.353Z,1516916541.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-25T21:42:21.354Z,1516916541.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:21.599Z,1516916541.599 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:21.600Z,1516916541.600 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:21.743Z,1516916541.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-25T21:42:21.744Z,1516916541.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:22.142Z,1516916542.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-25T21:42:22.143Z,1516916542.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:22.547Z,1516916542.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-25T21:42:22.547Z,1516916542.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:22.802Z,1516916542.802 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:22.804Z,1516916542.804 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:22.955Z,1516916542.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-25T21:42:22.956Z,1516916542.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:23.351Z,1516916543.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-25T21:42:23.352Z,1516916543.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:23.745Z,1516916543.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-25T21:42:23.746Z,1516916543.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:24.002Z,1516916544.002 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:24.003Z,1516916544.003 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:24.145Z,1516916544.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-25T21:42:24.146Z,1516916544.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:24.550Z,1516916544.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-25T21:42:24.551Z,1516916544.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:24.604Z,1516916544.604 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:24.605Z,1516916544.605 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:24.963Z,1516916544.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-25T21:42:24.964Z,1516916544.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:25.350Z,1516916545.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-25T21:42:25.351Z,1516916545.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:25.745Z,1516916545.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-25T21:42:25.746Z,1516916545.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:25.806Z,1516916545.806 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:25.807Z,1516916545.807 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:26.153Z,1516916546.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-25T21:42:26.154Z,1516916546.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:26.550Z,1516916546.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-25T21:42:26.551Z,1516916546.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:26.957Z,1516916546.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-25T21:42:26.958Z,1516916546.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:27.006Z,1516916547.006 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:27.007Z,1516916547.007 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:27.357Z,1516916547.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-25T21:42:27.358Z,1516916547.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:27.608Z,1516916547.608 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:27.610Z,1516916547.610 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:27.730Z,1516916547.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-25T21:42:27.731Z,1516916547.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:28.134Z,1516916548.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-25T21:42:28.135Z,1516916548.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:28.564Z,1516916548.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-25T21:42:28.565Z,1516916548.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:28.810Z,1516916548.810 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:28.811Z,1516916548.811 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:28.958Z,1516916548.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-25T21:42:28.959Z,1516916548.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:29.339Z,1516916549.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-25T21:42:29.340Z,1516916549.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:29.741Z,1516916549.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-25T21:42:29.742Z,1516916549.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:30.010Z,1516916550.010 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:30.011Z,1516916550.011 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:30.131Z,1516916550.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-25T21:42:30.132Z,1516916550.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:30.547Z,1516916550.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-25T21:42:30.548Z,1516916550.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:30.613Z,1516916550.613 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:30.614Z,1516916550.614 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:30.943Z,1516916550.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-25T21:42:30.944Z,1516916550.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:31.339Z,1516916551.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-25T21:42:31.340Z,1516916551.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:31.742Z,1516916551.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-25T21:42:31.743Z,1516916551.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:31.814Z,1516916551.814 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:31.815Z,1516916551.815 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:32.136Z,1516916552.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-25T21:42:32.140Z,1516916552.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:32.546Z,1516916552.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-25T21:42:32.547Z,1516916552.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:32.951Z,1516916552.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-25T21:42:32.952Z,1516916552.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:33.015Z,1516916553.015 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:33.017Z,1516916553.017 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:33.345Z,1516916553.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-25T21:42:33.346Z,1516916553.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:33.618Z,1516916553.618 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:33.619Z,1516916553.619 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:33.736Z,1516916553.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-25T21:42:33.737Z,1516916553.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:34.145Z,1516916554.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-25T21:42:34.146Z,1516916554.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:34.541Z,1516916554.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-25T21:42:34.542Z,1516916554.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:34.820Z,1516916554.820 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:34.821Z,1516916554.821 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:34.949Z,1516916554.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-25T21:42:34.950Z,1516916554.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:35.349Z,1516916555.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-25T21:42:35.350Z,1516916555.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:35.755Z,1516916555.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-25T21:42:35.756Z,1516916555.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:36.024Z,1516916556.024 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:36.025Z,1516916556.025 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:36.145Z,1516916556.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:36.536Z,1516916556.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:36.622Z,1516916556.622 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:36.624Z,1516916556.624 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:36.946Z,1516916556.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:37.350Z,1516916557.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:37.755Z,1516916557.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:37.822Z,1516916557.822 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T21:42:37.823Z,1516916557.823 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:38.158Z,1516916558.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:38.539Z,1516916558.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:38.938Z,1516916558.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:39.022Z,1516916559.022 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:39.023Z,1516916559.023 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:39.339Z,1516916559.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:39.627Z,1516916559.627 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:39.628Z,1516916559.628 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:39.732Z,1516916559.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:40.142Z,1516916560.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:40.535Z,1516916560.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:40.826Z,1516916560.826 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:40.827Z,1516916560.827 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:40.965Z,1516916560.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:41.367Z,1516916561.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:42.026Z,1516916562.026 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:42.027Z,1516916562.027 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:42.632Z,1516916562.632 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:42.633Z,1516916562.633 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:43.834Z,1516916563.834 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:43.835Z,1516916563.835 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:44.610Z,1516916564.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:44.763Z,1516916564.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:45.034Z,1516916565.034 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T21:42:45.036Z,1516916565.036 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:45.084Z,1516916565.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:45.481Z,1516916565.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:45.636Z,1516916565.636 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:45.637Z,1516916565.637 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:45.869Z,1516916565.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:46.268Z,1516916566.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:46.686Z,1516916566.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:46.838Z,1516916566.838 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:46.839Z,1516916566.839 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:47.088Z,1516916567.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:47.479Z,1516916567.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:47.879Z,1516916567.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:48.038Z,1516916568.038 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T21:42:48.039Z,1516916568.039 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:48.269Z,1516916568.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:48.641Z,1516916568.641 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:48.642Z,1516916568.642 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:48.700Z,1516916568.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:49.083Z,1516916569.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:49.475Z,1516916569.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:49.849Z,1516916569.849 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:49.873Z,1516916569.873 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:49.890Z,1516916569.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:50.295Z,1516916570.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:50.644Z,1516916570.644 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:50.645Z,1516916570.645 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:50.711Z,1516916570.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:51.069Z,1516916571.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:51.467Z,1516916571.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:51.848Z,1516916571.848 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T21:42:51.850Z,1516916571.850 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:51.871Z,1516916571.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:52.278Z,1516916572.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:52.705Z,1516916572.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:53.050Z,1516916573.050 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:53.051Z,1516916573.051 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:53.079Z,1516916573.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:53.482Z,1516916573.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:53.649Z,1516916573.649 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:53.651Z,1516916573.651 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:53.872Z,1516916573.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:54.268Z,1516916574.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:54.684Z,1516916574.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:54.852Z,1516916574.852 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:54.853Z,1516916574.853 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:55.084Z,1516916575.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:55.468Z,1516916575.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:55.879Z,1516916575.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:56.054Z,1516916576.054 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:56.055Z,1516916576.055 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:56.290Z,1516916576.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:56.657Z,1516916576.657 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:56.658Z,1516916576.658 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:56.690Z,1516916576.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:57.069Z,1516916577.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:57.470Z,1516916577.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:57.858Z,1516916577.858 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:57.859Z,1516916577.859 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:57.874Z,1516916577.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:58.276Z,1516916578.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:58.694Z,1516916578.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:59.064Z,1516916579.064 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T21:42:59.066Z,1516916579.066 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:59.098Z,1516916579.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:59.483Z,1516916579.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:42:59.658Z,1516916579.658 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:42:59.659Z,1516916579.659 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:42:59.870Z,1516916579.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:00.264Z,1516916580.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:00.695Z,1516916580.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:00.858Z,1516916580.858 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:43:00.859Z,1516916580.859 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:01.082Z,1516916581.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:01.468Z,1516916581.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:01.882Z,1516916581.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:02.058Z,1516916582.058 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T21:43:02.059Z,1516916582.059 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:02.286Z,1516916582.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:02.664Z,1516916582.664 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T21:43:02.667Z,1516916582.667 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:02.700Z,1516916582.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:03.068Z,1516916583.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:03.478Z,1516916583.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:03.866Z,1516916583.866 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:43:03.867Z,1516916583.867 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:03.873Z,1516916583.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:04.268Z,1516916584.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:04.696Z,1516916584.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:05.067Z,1516916585.067 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:43:05.068Z,1516916585.068 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:05.085Z,1516916585.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:05.482Z,1516916585.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:05.695Z,1516916585.695 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:43:05.696Z,1516916585.696 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:05.881Z,1516916585.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:06.275Z,1516916586.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:06.684Z,1516916586.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:06.894Z,1516916586.894 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T21:43:06.895Z,1516916586.895 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:07.081Z,1516916587.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:07.473Z,1516916587.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:07.670Z,1516916587.670 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:43:07.671Z,1516916587.671 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:07.882Z,1516916587.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:08.290Z,1516916588.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:08.693Z,1516916588.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:08.870Z,1516916588.870 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T21:43:08.871Z,1516916588.871 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:09.079Z,1516916589.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:09.481Z,1516916589.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:09.879Z,1516916589.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:10.070Z,1516916590.070 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:43:10.071Z,1516916590.071 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:10.279Z,1516916590.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:10.677Z,1516916590.677 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:43:10.679Z,1516916590.679 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:10.706Z,1516916590.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:11.094Z,1516916591.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:11.484Z,1516916591.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:11.866Z,1516916591.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:11.878Z,1516916591.878 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T21:43:11.879Z,1516916591.879 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:12.298Z,1516916592.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:12.694Z,1516916592.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:13.070Z,1516916593.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:13.086Z,1516916593.086 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:43:13.088Z,1516916593.088 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:13.471Z,1516916593.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:13.680Z,1516916593.680 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:43:13.681Z,1516916593.681 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:13.876Z,1516916593.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:14.302Z,1516916594.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:14.701Z,1516916594.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:14.882Z,1516916594.882 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:43:14.883Z,1516916594.883 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:15.074Z,1516916595.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:15.474Z,1516916595.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:15.868Z,1516916595.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:16.082Z,1516916596.082 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:43:16.083Z,1516916596.083 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:16.268Z,1516916596.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:16.684Z,1516916596.684 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T21:43:16.685Z,1516916596.685 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:16.702Z,1516916596.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:17.083Z,1516916597.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:17.482Z,1516916597.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:17.870Z,1516916597.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:17.886Z,1516916597.886 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T21:43:17.887Z,1516916597.887 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:18.276Z,1516916598.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:18.698Z,1516916598.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:19.083Z,1516916599.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:19.086Z,1516916599.086 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T21:43:19.087Z,1516916599.087 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:19.490Z,1516916599.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:19.689Z,1516916599.689 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T21:43:19.690Z,1516916599.690 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:19.880Z,1516916599.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:20.277Z,1516916600.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:20.701Z,1516916600.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:20.890Z,1516916600.890 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:43:20.891Z,1516916600.891 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:21.086Z,1516916601.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:21.491Z,1516916601.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:21.869Z,1516916601.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:22.090Z,1516916602.090 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T21:43:22.091Z,1516916602.091 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:22.272Z,1516916602.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:22.694Z,1516916602.694 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:43:22.695Z,1516916602.695 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:22.704Z,1516916602.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:23.081Z,1516916603.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:23.490Z,1516916603.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:23.880Z,1516916603.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:23.894Z,1516916603.894 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:43:23.895Z,1516916603.895 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:24.274Z,1516916604.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:24.701Z,1516916604.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:25.082Z,1516916605.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:25.094Z,1516916605.094 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:43:25.095Z,1516916605.095 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:25.479Z,1516916605.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:25.698Z,1516916605.698 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T21:43:25.699Z,1516916605.699 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:25.879Z,1516916605.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:26.280Z,1516916606.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:26.701Z,1516916606.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:26.898Z,1516916606.898 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:43:26.899Z,1516916606.899 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:27.087Z,1516916607.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:27.486Z,1516916607.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:27.879Z,1516916607.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:28.098Z,1516916608.098 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:43:28.099Z,1516916608.099 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:28.282Z,1516916608.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:28.703Z,1516916608.703 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:43:28.704Z,1516916608.704 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:28.711Z,1516916608.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:29.085Z,1516916609.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:29.483Z,1516916609.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:29.866Z,1516916609.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:29.902Z,1516916609.902 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:43:29.903Z,1516916609.903 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:30.264Z,1516916610.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:30.708Z,1516916610.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:31.099Z,1516916611.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:31.102Z,1516916611.102 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:43:31.103Z,1516916611.103 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:31.472Z,1516916611.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:31.707Z,1516916611.707 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:43:31.708Z,1516916611.708 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:31.870Z,1516916611.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:32.272Z,1516916612.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:32.671Z,1516916612.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:32.910Z,1516916612.910 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:43:32.911Z,1516916612.911 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:33.083Z,1516916613.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:33.478Z,1516916613.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:33.877Z,1516916613.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:34.110Z,1516916614.110 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:43:34.111Z,1516916614.111 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:34.272Z,1516916614.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:34.690Z,1516916614.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:34.712Z,1516916614.712 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:43:34.713Z,1516916614.713 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:35.081Z,1516916615.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:35.486Z,1516916615.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:35.879Z,1516916615.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:35.914Z,1516916615.914 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:43:35.915Z,1516916615.915 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:36.268Z,1516916616.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:36.679Z,1516916616.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:37.082Z,1516916617.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:37.114Z,1516916617.114 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T21:43:37.115Z,1516916617.115 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:37.481Z,1516916617.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:37.717Z,1516916617.717 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T21:43:37.718Z,1516916617.718 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:37.873Z,1516916617.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:38.277Z,1516916618.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:38.678Z,1516916618.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:38.918Z,1516916618.918 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:43:38.919Z,1516916618.919 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:39.087Z,1516916619.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:39.494Z,1516916619.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:39.878Z,1516916619.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:40.118Z,1516916620.118 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:43:40.120Z,1516916620.120 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:40.282Z,1516916620.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:40.700Z,1516916620.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:40.712Z,1516916620.712 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-25T21:43:40.727Z,1516916620.727 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:43:40.729Z,1516916620.729 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:40.730Z,1516916620.730 [Default:CheckIn:C.Wait] Stopped
2018-01-25T21:43:40.730Z,1516916620.730 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-25T21:43:40.730Z,1516916620.730 [Default:CheckIn:D] Running Loop=1
2018-01-25T21:43:41.083Z,1516916621.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:41.087Z,1516916621.087 [Default:CheckIn:D] Stopped
2018-01-25T21:43:41.087Z,1516916621.087 [Default:CheckIn:E] Running Loop=1
2018-01-25T21:43:41.484Z,1516916621.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:41.487Z,1516916621.487 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 21.370675 min 
2018-01-25T21:43:41.487Z,1516916621.487 [Default:CheckIn:E] Stopped
2018-01-25T21:43:41.488Z,1516916621.488 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-25T21:43:41.488Z,1516916621.488 [Default:CheckIn] Stopped
2018-01-25T21:43:41.488Z,1516916621.488 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-25T21:43:41.488Z,1516916621.488 [Default:CheckIn](INFO): Running loop #3
2018-01-25T21:43:41.488Z,1516916621.488 [Default:CheckIn] Running Loop=3
2018-01-25T21:43:41.488Z,1516916621.488 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-25T21:43:41.488Z,1516916621.488 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-25T21:43:41.930Z,1516916621.930 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:43:41.931Z,1516916621.931 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:42.725Z,1516916622.725 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:43:42.726Z,1516916622.726 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:43.926Z,1516916623.926 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:43:43.927Z,1516916623.927 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:44.742Z,1516916624.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:44.851Z,1516916624.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:45.128Z,1516916625.128 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:43:45.129Z,1516916625.129 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:45.233Z,1516916625.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:45.630Z,1516916625.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:45.729Z,1516916625.729 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:43:45.730Z,1516916625.730 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:46.012Z,1516916626.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:46.410Z,1516916626.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:46.820Z,1516916626.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:46.930Z,1516916626.930 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:43:46.931Z,1516916626.931 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:47.211Z,1516916627.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:47.614Z,1516916627.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:48.023Z,1516916628.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:48.130Z,1516916628.130 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:43:48.131Z,1516916628.131 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:48.425Z,1516916628.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:48.767Z,1516916628.767 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:43:48.771Z,1516916628.771 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:48.852Z,1516916628.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:49.198Z,1516916629.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:49.602Z,1516916629.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:49.971Z,1516916629.971 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T21:43:49.972Z,1516916629.972 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:50.031Z,1516916630.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:50.413Z,1516916630.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:50.736Z,1516916630.736 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:43:50.738Z,1516916630.738 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:50.822Z,1516916630.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:51.218Z,1516916631.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:51.627Z,1516916631.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:51.938Z,1516916631.938 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:43:51.939Z,1516916631.939 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:52.014Z,1516916632.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:52.406Z,1516916632.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:52.813Z,1516916632.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:53.138Z,1516916633.138 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:43:53.139Z,1516916633.139 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:53.210Z,1516916633.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:53.614Z,1516916633.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:53.741Z,1516916633.741 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:43:53.742Z,1516916633.742 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:54.031Z,1516916634.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:54.416Z,1516916634.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:54.816Z,1516916634.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:54.942Z,1516916634.942 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:43:54.943Z,1516916634.943 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:55.198Z,1516916635.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:55.600Z,1516916635.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:56.001Z,1516916636.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:56.142Z,1516916636.142 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:43:56.144Z,1516916636.144 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:56.406Z,1516916636.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:56.746Z,1516916636.746 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:43:56.747Z,1516916636.747 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:56.810Z,1516916636.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:57.208Z,1516916637.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:57.618Z,1516916637.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:57.946Z,1516916637.946 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:43:57.947Z,1516916637.947 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:58.022Z,1516916638.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:58.410Z,1516916638.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:58.813Z,1516916638.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:59.146Z,1516916639.146 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:43:59.147Z,1516916639.147 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:43:59.213Z,1516916639.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:59.611Z,1516916639.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:43:59.750Z,1516916639.750 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:43:59.752Z,1516916639.752 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:00.018Z,1516916640.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:00.416Z,1516916640.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:00.819Z,1516916640.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:00.950Z,1516916640.950 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:00.951Z,1516916640.951 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:01.213Z,1516916641.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:01.614Z,1516916641.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:01.995Z,1516916641.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:02.151Z,1516916642.151 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:02.153Z,1516916642.153 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:02.398Z,1516916642.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:02.755Z,1516916642.755 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:02.756Z,1516916642.756 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:02.823Z,1516916642.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:03.220Z,1516916643.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:03.628Z,1516916643.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:03.969Z,1516916643.969 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:03.970Z,1516916643.970 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:04.006Z,1516916644.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:04.410Z,1516916644.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:04.812Z,1516916644.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:05.171Z,1516916645.171 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:05.172Z,1516916645.172 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:05.222Z,1516916645.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:05.610Z,1516916645.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:05.760Z,1516916645.760 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:05.761Z,1516916645.761 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:06.022Z,1516916646.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:06.417Z,1516916646.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:06.834Z,1516916646.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:06.962Z,1516916646.962 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:06.963Z,1516916646.963 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:07.226Z,1516916647.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:07.598Z,1516916647.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:07.994Z,1516916647.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:08.162Z,1516916648.162 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:08.163Z,1516916648.163 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:08.394Z,1516916648.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:08.775Z,1516916648.775 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:08.779Z,1516916648.779 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:08.826Z,1516916648.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:09.228Z,1516916649.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:09.630Z,1516916649.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:09.978Z,1516916649.978 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:09.980Z,1516916649.980 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:09.999Z,1516916649.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:10.414Z,1516916650.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:10.771Z,1516916650.771 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:10.773Z,1516916650.773 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:10.819Z,1516916650.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:11.209Z,1516916651.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:11.603Z,1516916651.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:11.981Z,1516916651.981 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:12.006Z,1516916652.006 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:12.022Z,1516916652.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:12.417Z,1516916652.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:12.771Z,1516916652.771 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:12.772Z,1516916652.772 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:12.850Z,1516916652.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:13.214Z,1516916653.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:13.611Z,1516916653.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:13.971Z,1516916653.971 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:13.972Z,1516916653.972 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:14.018Z,1516916654.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:14.420Z,1516916654.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:14.821Z,1516916654.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:15.170Z,1516916655.170 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:15.171Z,1516916655.171 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:15.226Z,1516916655.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:15.604Z,1516916655.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:15.775Z,1516916655.775 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:15.776Z,1516916655.776 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:16.010Z,1516916656.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:16.401Z,1516916656.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:16.819Z,1516916656.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:16.978Z,1516916656.978 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:16.979Z,1516916656.979 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:17.212Z,1516916657.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:17.599Z,1516916657.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:18.018Z,1516916658.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:18.178Z,1516916658.178 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:18.179Z,1516916658.179 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:18.410Z,1516916658.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:18.784Z,1516916658.784 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:18.785Z,1516916658.785 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:18.854Z,1516916658.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:19.210Z,1516916659.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:19.602Z,1516916659.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:19.986Z,1516916659.986 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:19.987Z,1516916659.987 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:20.022Z,1516916660.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:20.415Z,1516916660.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:20.823Z,1516916660.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:21.187Z,1516916661.187 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:21.188Z,1516916661.188 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:21.232Z,1516916661.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:21.623Z,1516916661.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:21.784Z,1516916661.784 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:21.786Z,1516916661.786 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:22.015Z,1516916662.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:22.414Z,1516916662.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:22.820Z,1516916662.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:22.986Z,1516916662.986 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:22.987Z,1516916662.987 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:23.198Z,1516916663.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:23.598Z,1516916663.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:24.020Z,1516916664.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:24.186Z,1516916664.186 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:24.187Z,1516916664.187 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:24.416Z,1516916664.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:24.789Z,1516916664.789 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:24.790Z,1516916664.790 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:24.859Z,1516916664.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:25.206Z,1516916665.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:25.606Z,1516916665.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:25.990Z,1516916665.990 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:25.991Z,1516916665.991 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:26.004Z,1516916666.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:26.400Z,1516916666.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:26.817Z,1516916666.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:27.191Z,1516916667.191 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:27.192Z,1516916667.192 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:27.211Z,1516916667.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:27.614Z,1516916667.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:27.794Z,1516916667.794 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:27.795Z,1516916667.795 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:28.014Z,1516916668.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:28.408Z,1516916668.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:28.821Z,1516916668.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:28.994Z,1516916668.994 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:28.995Z,1516916668.995 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:29.215Z,1516916669.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:29.606Z,1516916669.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:30.011Z,1516916670.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:30.194Z,1516916670.194 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:30.195Z,1516916670.195 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:30.426Z,1516916670.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:30.803Z,1516916670.803 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:30.817Z,1516916670.817 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:30.824Z,1516916670.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:31.218Z,1516916671.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:31.598Z,1516916671.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:31.998Z,1516916671.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:32.018Z,1516916672.018 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:32.019Z,1516916672.019 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:32.406Z,1516916672.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:32.802Z,1516916672.802 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:32.803Z,1516916672.803 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:32.850Z,1516916672.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:33.209Z,1516916673.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:33.610Z,1516916673.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:33.999Z,1516916673.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:34.002Z,1516916674.002 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:34.003Z,1516916674.003 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:34.400Z,1516916674.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:34.823Z,1516916674.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:35.202Z,1516916675.202 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:35.203Z,1516916675.203 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:35.211Z,1516916675.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:35.610Z,1516916675.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:35.806Z,1516916675.806 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:35.807Z,1516916675.807 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:36.019Z,1516916676.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:36.415Z,1516916676.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:36.841Z,1516916676.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:37.006Z,1516916677.006 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:37.007Z,1516916677.007 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:37.213Z,1516916677.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:37.602Z,1516916677.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:38.006Z,1516916678.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:38.206Z,1516916678.206 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:38.207Z,1516916678.207 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:38.405Z,1516916678.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:38.816Z,1516916678.816 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:38.818Z,1516916678.818 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:38.842Z,1516916678.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:39.223Z,1516916679.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:39.618Z,1516916679.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:40.018Z,1516916680.018 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:40.019Z,1516916680.019 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:40.025Z,1516916680.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:40.400Z,1516916680.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:40.830Z,1516916680.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:41.218Z,1516916681.218 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T21:44:41.219Z,1516916681.219 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:41.226Z,1516916681.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:41.630Z,1516916681.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:41.815Z,1516916681.815 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:41.817Z,1516916681.817 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:43.018Z,1516916683.018 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:43.019Z,1516916683.019 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:44.218Z,1516916684.218 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:44.219Z,1516916684.219 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:44.820Z,1516916684.820 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:44.821Z,1516916684.821 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:44.910Z,1516916684.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:45.036Z,1516916685.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:45.406Z,1516916685.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:45.833Z,1516916685.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:46.022Z,1516916686.022 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:46.023Z,1516916686.023 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:46.193Z,1516916686.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:46.592Z,1516916686.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:47.002Z,1516916687.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:47.222Z,1516916687.222 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T21:44:47.224Z,1516916687.224 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:47.399Z,1516916687.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:47.825Z,1516916687.825 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:47.826Z,1516916687.826 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:47.827Z,1516916687.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:48.191Z,1516916688.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:48.592Z,1516916688.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:48.996Z,1516916688.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:49.026Z,1516916689.026 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:49.027Z,1516916689.027 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:49.401Z,1516916689.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:49.816Z,1516916689.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:50.204Z,1516916690.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:50.226Z,1516916690.226 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:50.227Z,1516916690.227 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:50.602Z,1516916690.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:50.830Z,1516916690.830 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:50.832Z,1516916690.832 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:51.006Z,1516916691.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:51.392Z,1516916691.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:51.819Z,1516916691.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:52.032Z,1516916692.032 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:52.034Z,1516916692.034 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:52.210Z,1516916692.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:52.603Z,1516916692.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:53.007Z,1516916693.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:53.234Z,1516916693.234 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:53.235Z,1516916693.235 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:53.392Z,1516916693.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:53.804Z,1516916693.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:53.839Z,1516916693.839 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:53.841Z,1516916693.841 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:54.206Z,1516916694.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:54.614Z,1516916694.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:54.998Z,1516916694.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:55.042Z,1516916695.042 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:55.043Z,1516916695.043 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:55.404Z,1516916695.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:55.819Z,1516916695.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:56.217Z,1516916696.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:56.242Z,1516916696.242 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:56.243Z,1516916696.243 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:56.608Z,1516916696.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:56.838Z,1516916696.838 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:56.840Z,1516916696.840 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:57.010Z,1516916697.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:57.390Z,1516916697.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:57.847Z,1516916697.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:58.038Z,1516916698.038 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:58.039Z,1516916698.039 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:58.219Z,1516916698.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:58.603Z,1516916698.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:58.993Z,1516916698.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:59.238Z,1516916699.238 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:59.239Z,1516916699.239 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:44:59.406Z,1516916699.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:59.803Z,1516916699.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:44:59.843Z,1516916699.843 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:44:59.845Z,1516916699.845 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:00.210Z,1516916700.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:00.610Z,1516916700.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:01.001Z,1516916701.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:01.046Z,1516916701.046 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:01.047Z,1516916701.047 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:01.402Z,1516916701.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:01.804Z,1516916701.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:02.208Z,1516916702.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:02.246Z,1516916702.246 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:02.247Z,1516916702.247 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:02.606Z,1516916702.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:02.848Z,1516916702.848 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T21:45:02.849Z,1516916702.849 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:03.002Z,1516916703.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:03.402Z,1516916703.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:03.813Z,1516916703.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:04.050Z,1516916704.050 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:04.051Z,1516916704.051 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:04.216Z,1516916704.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:04.610Z,1516916704.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:05.005Z,1516916705.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:05.250Z,1516916705.250 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:05.251Z,1516916705.251 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:05.403Z,1516916705.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:05.806Z,1516916705.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:05.853Z,1516916705.853 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:05.854Z,1516916705.854 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:06.215Z,1516916706.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:06.614Z,1516916706.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:07.006Z,1516916707.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:07.054Z,1516916707.054 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:07.055Z,1516916707.055 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:07.409Z,1516916707.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:07.808Z,1516916707.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:08.218Z,1516916708.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:08.254Z,1516916708.254 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:08.255Z,1516916708.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:08.617Z,1516916708.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:08.857Z,1516916708.857 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T21:45:08.858Z,1516916708.858 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:08.994Z,1516916708.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:09.395Z,1516916709.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:09.817Z,1516916709.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:10.058Z,1516916710.058 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:10.059Z,1516916710.059 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:10.216Z,1516916710.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:10.621Z,1516916710.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:11.022Z,1516916711.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:11.258Z,1516916711.258 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:11.259Z,1516916711.259 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:11.396Z,1516916711.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:11.803Z,1516916711.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:11.862Z,1516916711.862 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:11.863Z,1516916711.863 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:12.209Z,1516916712.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:12.615Z,1516916712.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:12.000Z,1516916713.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:13.062Z,1516916713.062 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:13.063Z,1516916713.063 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:13.406Z,1516916713.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:13.808Z,1516916713.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:14.208Z,1516916714.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:14.262Z,1516916714.262 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:14.264Z,1516916714.264 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:14.616Z,1516916714.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:14.866Z,1516916714.866 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:14.868Z,1516916714.868 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:14.994Z,1516916714.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:15.399Z,1516916715.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:15.825Z,1516916715.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:16.066Z,1516916716.066 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:16.067Z,1516916716.067 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:16.217Z,1516916716.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:16.603Z,1516916716.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:16.999Z,1516916716.999 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:16.999Z,1516916716.999 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 9
2018-01-25T21:45:16.999Z,1516916716.999 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-25T21:45:17.001Z,1516916717.001 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:17.001Z,1516916717.001 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2018-01-25T21:45:17.001Z,1516916717.001 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-25T21:45:17.002Z,1516916717.002 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:17.003Z,1516916717.003 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-01-25T21:45:17.003Z,1516916717.003 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-25T21:45:17.043Z,1516916717.043 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-25T21:45:17.043Z,1516916717.043 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-25T21:45:17.043Z,1516916717.043 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-25T21:45:17.266Z,1516916717.266 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:17.267Z,1516916717.267 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:17.421Z,1516916717.421 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-25T21:45:17.421Z,1516916717.421 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 9
2018-01-25T21:45:17.421Z,1516916717.421 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-25T21:45:17.421Z,1516916717.421 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2018-01-25T21:45:17.422Z,1516916717.422 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-25T21:45:17.422Z,1516916717.422 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-01-25T21:45:17.801Z,1516916717.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-25T21:45:17.801Z,1516916717.801 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T21:45:17.802Z,1516916717.802 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T21:45:17.802Z,1516916717.802 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-25T21:45:17.802Z,1516916717.802 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T21:45:17.803Z,1516916717.803 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T21:45:17.803Z,1516916717.803 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-25T21:45:17.803Z,1516916717.803 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T21:45:17.804Z,1516916717.804 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T21:45:17.871Z,1516916717.871 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:17.872Z,1516916717.872 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:18.215Z,1516916718.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-25T21:45:18.216Z,1516916718.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:18.609Z,1516916718.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-25T21:45:18.610Z,1516916718.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:19.002Z,1516916719.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-25T21:45:19.003Z,1516916719.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:19.074Z,1516916719.074 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:19.075Z,1516916719.075 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:19.410Z,1516916719.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-25T21:45:19.411Z,1516916719.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:19.810Z,1516916719.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-25T21:45:19.813Z,1516916719.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:20.210Z,1516916720.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-25T21:45:20.211Z,1516916720.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:20.274Z,1516916720.274 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:20.275Z,1516916720.275 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:20.625Z,1516916720.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-25T21:45:20.626Z,1516916720.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:20.876Z,1516916720.876 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:20.877Z,1516916720.877 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:21.014Z,1516916721.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-25T21:45:21.015Z,1516916721.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:21.393Z,1516916721.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-25T21:45:21.394Z,1516916721.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:21.817Z,1516916721.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-25T21:45:21.818Z,1516916721.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:22.078Z,1516916722.078 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:22.079Z,1516916722.079 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:22.198Z,1516916722.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-25T21:45:22.199Z,1516916722.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:22.591Z,1516916722.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-25T21:45:22.593Z,1516916722.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:23.025Z,1516916723.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-25T21:45:23.026Z,1516916723.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:23.278Z,1516916723.278 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:23.279Z,1516916723.279 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:23.422Z,1516916723.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-25T21:45:23.423Z,1516916723.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:23.801Z,1516916723.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-25T21:45:23.802Z,1516916723.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:23.880Z,1516916723.880 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:23.882Z,1516916723.882 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:24.200Z,1516916724.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-25T21:45:24.205Z,1516916724.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:24.599Z,1516916724.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-25T21:45:24.600Z,1516916724.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:25.010Z,1516916725.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-25T21:45:25.010Z,1516916725.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:25.082Z,1516916725.082 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:25.083Z,1516916725.083 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:25.407Z,1516916725.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-25T21:45:25.408Z,1516916725.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:25.800Z,1516916725.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-25T21:45:25.801Z,1516916725.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:26.213Z,1516916726.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-25T21:45:26.214Z,1516916726.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:26.282Z,1516916726.282 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:26.283Z,1516916726.283 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:26.614Z,1516916726.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-25T21:45:26.615Z,1516916726.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:26.885Z,1516916726.885 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:26.886Z,1516916726.886 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:27.011Z,1516916727.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-25T21:45:27.012Z,1516916727.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:27.404Z,1516916727.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-25T21:45:27.409Z,1516916727.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:27.815Z,1516916727.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-25T21:45:27.816Z,1516916727.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:28.086Z,1516916728.086 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:28.087Z,1516916728.087 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:28.214Z,1516916728.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-25T21:45:28.215Z,1516916728.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:28.613Z,1516916728.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-25T21:45:28.614Z,1516916728.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:29.015Z,1516916729.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-25T21:45:29.017Z,1516916729.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:29.286Z,1516916729.286 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:29.287Z,1516916729.287 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:29.418Z,1516916729.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-25T21:45:29.419Z,1516916729.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:29.826Z,1516916729.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-25T21:45:29.827Z,1516916729.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:29.890Z,1516916729.890 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:29.891Z,1516916729.891 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:30.200Z,1516916730.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-25T21:45:30.201Z,1516916730.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:30.601Z,1516916730.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-25T21:45:30.602Z,1516916730.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:30.997Z,1516916730.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-25T21:45:30.998Z,1516916730.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:31.090Z,1516916731.090 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:31.091Z,1516916731.091 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:31.423Z,1516916731.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-25T21:45:31.424Z,1516916731.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:31.796Z,1516916731.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-25T21:45:31.800Z,1516916731.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:32.203Z,1516916732.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-25T21:45:32.204Z,1516916732.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:32.290Z,1516916732.290 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:32.292Z,1516916732.292 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:32.609Z,1516916732.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-25T21:45:32.610Z,1516916732.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:32.895Z,1516916732.895 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:32.896Z,1516916732.896 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:33.022Z,1516916733.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-25T21:45:33.023Z,1516916733.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:33.398Z,1516916733.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-25T21:45:33.402Z,1516916733.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:33.797Z,1516916733.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-25T21:45:33.798Z,1516916733.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:34.098Z,1516916734.098 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:34.099Z,1516916734.099 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:34.209Z,1516916734.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-25T21:45:34.210Z,1516916734.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:34.625Z,1516916734.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-25T21:45:34.626Z,1516916734.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:35.007Z,1516916735.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-25T21:45:35.008Z,1516916735.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:35.298Z,1516916735.298 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:35.299Z,1516916735.299 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:35.407Z,1516916735.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-25T21:45:35.408Z,1516916735.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:35.825Z,1516916735.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-25T21:45:35.826Z,1516916735.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:35.927Z,1516916735.927 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:35.928Z,1516916735.928 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:36.226Z,1516916736.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-25T21:45:36.227Z,1516916736.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:36.595Z,1516916736.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-25T21:45:36.596Z,1516916736.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:37.001Z,1516916737.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:37.126Z,1516916737.126 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:37.127Z,1516916737.127 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:37.413Z,1516916737.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:37.814Z,1516916737.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:37.902Z,1516916737.902 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:37.903Z,1516916737.903 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:38.215Z,1516916738.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:38.622Z,1516916738.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:39.015Z,1516916739.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:39.102Z,1516916739.102 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:39.103Z,1516916739.103 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:39.437Z,1516916739.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:39.801Z,1516916739.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:40.206Z,1516916740.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:40.302Z,1516916740.302 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:40.303Z,1516916740.303 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:40.614Z,1516916740.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:40.906Z,1516916740.906 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:40.908Z,1516916740.908 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:41.033Z,1516916741.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:41.415Z,1516916741.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:41.824Z,1516916741.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:42.106Z,1516916742.106 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:42.107Z,1516916742.107 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:43.306Z,1516916743.306 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:43.307Z,1516916743.307 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:43.911Z,1516916743.911 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:43.913Z,1516916743.913 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:45.041Z,1516916745.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:45.114Z,1516916745.114 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:45.115Z,1516916745.115 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:45.192Z,1516916745.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:45.514Z,1516916745.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:45.930Z,1516916745.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:46.310Z,1516916746.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:46.314Z,1516916746.314 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:46.315Z,1516916746.315 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:46.707Z,1516916746.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:46.916Z,1516916746.916 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:46.917Z,1516916746.917 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:47.111Z,1516916747.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:47.510Z,1516916747.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:47.935Z,1516916747.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:48.118Z,1516916748.118 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:48.119Z,1516916748.119 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:48.321Z,1516916748.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:48.718Z,1516916748.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:49.111Z,1516916749.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:49.318Z,1516916749.318 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:49.319Z,1516916749.319 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:49.512Z,1516916749.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:49.920Z,1516916749.920 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:49.922Z,1516916749.922 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:49.949Z,1516916749.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:50.322Z,1516916750.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:50.714Z,1516916750.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:51.115Z,1516916751.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:51.122Z,1516916751.122 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:51.123Z,1516916751.123 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:51.514Z,1516916751.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:51.936Z,1516916751.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:52.320Z,1516916752.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:52.322Z,1516916752.322 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:52.323Z,1516916752.323 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:52.704Z,1516916752.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:52.925Z,1516916752.925 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:52.926Z,1516916752.926 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:53.103Z,1516916753.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:53.505Z,1516916753.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:53.935Z,1516916753.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:54.127Z,1516916754.127 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:54.129Z,1516916754.129 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:54.319Z,1516916754.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:54.710Z,1516916754.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:55.101Z,1516916755.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:55.330Z,1516916755.330 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:55.331Z,1516916755.331 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:55.510Z,1516916755.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:55.931Z,1516916755.931 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:55.932Z,1516916755.932 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:55.936Z,1516916755.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:56.315Z,1516916756.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:56.725Z,1516916756.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:57.112Z,1516916757.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:57.130Z,1516916757.130 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:57.131Z,1516916757.131 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:57.518Z,1516916757.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:57.940Z,1516916757.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:58.318Z,1516916758.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:58.330Z,1516916758.330 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:58.331Z,1516916758.331 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:58.716Z,1516916758.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:58.934Z,1516916758.934 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:45:58.936Z,1516916758.936 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:45:59.122Z,1516916759.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:59.502Z,1516916759.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:45:59.945Z,1516916759.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:00.134Z,1516916760.134 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:00.135Z,1516916760.135 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:00.312Z,1516916760.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:00.704Z,1516916760.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:01.100Z,1516916761.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:01.334Z,1516916761.334 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:01.335Z,1516916761.335 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:01.506Z,1516916761.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:01.939Z,1516916761.939 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:01.940Z,1516916761.940 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:01.947Z,1516916761.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:02.307Z,1516916762.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:02.714Z,1516916762.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:03.100Z,1516916763.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:03.142Z,1516916763.142 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:03.143Z,1516916763.143 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:03.506Z,1516916763.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:03.923Z,1516916763.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:04.311Z,1516916764.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:04.343Z,1516916764.343 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:04.344Z,1516916764.344 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:04.710Z,1516916764.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:04.943Z,1516916764.943 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:04.945Z,1516916764.945 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:05.116Z,1516916765.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:05.500Z,1516916765.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:05.911Z,1516916765.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:06.146Z,1516916766.146 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:06.147Z,1516916766.147 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:06.316Z,1516916766.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:06.718Z,1516916766.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:07.107Z,1516916767.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:07.346Z,1516916767.346 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:07.348Z,1516916767.348 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:07.512Z,1516916767.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:07.910Z,1516916767.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:07.956Z,1516916767.956 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:07.957Z,1516916767.957 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:08.321Z,1516916768.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:08.724Z,1516916768.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:09.110Z,1516916769.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:09.158Z,1516916769.158 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:09.159Z,1516916769.159 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:09.514Z,1516916769.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:09.930Z,1516916769.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:09.951Z,1516916769.951 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:09.953Z,1516916769.953 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:10.327Z,1516916770.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:10.707Z,1516916770.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:11.106Z,1516916771.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:11.154Z,1516916771.154 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:11.155Z,1516916771.155 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:11.507Z,1516916771.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:11.911Z,1516916771.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:12.314Z,1516916772.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:12.354Z,1516916772.354 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:12.355Z,1516916772.355 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:12.710Z,1516916772.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:12.956Z,1516916772.956 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:12.957Z,1516916772.957 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:13.110Z,1516916773.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:13.511Z,1516916773.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:13.910Z,1516916773.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:14.158Z,1516916774.158 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:14.159Z,1516916774.159 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:14.315Z,1516916774.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:14.722Z,1516916774.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:15.109Z,1516916775.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:15.358Z,1516916775.358 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:15.359Z,1516916775.359 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:15.502Z,1516916775.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:15.915Z,1516916775.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:15.961Z,1516916775.961 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:15.962Z,1516916775.962 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:16.327Z,1516916776.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:16.718Z,1516916776.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:17.115Z,1516916777.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:17.162Z,1516916777.162 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:17.163Z,1516916777.163 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:17.507Z,1516916777.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:17.915Z,1516916777.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:18.322Z,1516916778.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:18.362Z,1516916778.362 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:18.363Z,1516916778.363 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:18.718Z,1516916778.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:18.966Z,1516916778.966 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:18.967Z,1516916778.967 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:19.113Z,1516916779.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:19.507Z,1516916779.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:19.921Z,1516916779.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:20.166Z,1516916780.166 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:20.167Z,1516916780.167 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:20.323Z,1516916780.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:20.703Z,1516916780.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:21.106Z,1516916781.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:21.366Z,1516916781.366 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:21.367Z,1516916781.367 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:21.506Z,1516916781.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:21.928Z,1516916781.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:21.980Z,1516916781.980 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:21.981Z,1516916781.981 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:22.335Z,1516916782.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:22.726Z,1516916782.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:23.107Z,1516916783.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:23.182Z,1516916783.182 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:23.184Z,1516916783.184 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:23.508Z,1516916783.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:23.911Z,1516916783.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:23.973Z,1516916783.973 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:23.974Z,1516916783.974 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:24.328Z,1516916784.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:24.715Z,1516916784.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:25.109Z,1516916785.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:25.174Z,1516916785.174 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:25.175Z,1516916785.175 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:25.517Z,1516916785.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:25.914Z,1516916785.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:26.316Z,1516916786.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:26.374Z,1516916786.374 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:26.375Z,1516916786.375 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:26.727Z,1516916786.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:26.977Z,1516916786.977 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:26.979Z,1516916786.979 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:27.110Z,1516916787.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:27.513Z,1516916787.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:27.925Z,1516916787.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:28.178Z,1516916788.178 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:28.180Z,1516916788.180 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:28.330Z,1516916788.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:28.725Z,1516916788.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:29.122Z,1516916789.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:29.378Z,1516916789.378 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:29.379Z,1516916789.379 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:29.510Z,1516916789.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:29.915Z,1516916789.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:29.983Z,1516916789.983 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:29.985Z,1516916789.985 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:30.328Z,1516916790.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:30.723Z,1516916790.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:31.124Z,1516916791.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:31.186Z,1516916791.186 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:31.187Z,1516916791.187 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:31.518Z,1516916791.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:31.916Z,1516916791.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:32.319Z,1516916792.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:32.386Z,1516916792.386 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:32.387Z,1516916792.387 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:32.722Z,1516916792.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:32.987Z,1516916792.987 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:32.988Z,1516916792.988 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:33.124Z,1516916793.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:33.519Z,1516916793.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:33.927Z,1516916793.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:34.186Z,1516916794.186 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:34.187Z,1516916794.187 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:34.308Z,1516916794.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:34.706Z,1516916794.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:35.107Z,1516916795.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:35.386Z,1516916795.386 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:35.387Z,1516916795.387 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:35.514Z,1516916795.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:35.909Z,1516916795.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:35.991Z,1516916795.991 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:35.993Z,1516916795.993 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:36.318Z,1516916796.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:36.716Z,1516916796.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:37.122Z,1516916797.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:37.194Z,1516916797.194 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:37.195Z,1516916797.195 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:37.514Z,1516916797.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:37.911Z,1516916797.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:38.316Z,1516916798.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:38.394Z,1516916798.394 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:38.395Z,1516916798.395 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:38.710Z,1516916798.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:38.996Z,1516916798.996 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:38.997Z,1516916798.997 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:39.120Z,1516916799.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:39.524Z,1516916799.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:39.925Z,1516916799.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:40.199Z,1516916800.199 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:40.201Z,1516916800.201 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:40.318Z,1516916800.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:40.730Z,1516916800.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:41.102Z,1516916801.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:41.402Z,1516916801.402 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:41.403Z,1516916801.403 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:41.510Z,1516916801.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:41.930Z,1516916801.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:42.001Z,1516916802.001 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:42.002Z,1516916802.002 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:43.202Z,1516916803.202 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:43.203Z,1516916803.203 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:44.402Z,1516916804.402 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:44.403Z,1516916804.403 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:45.006Z,1516916805.006 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:45.007Z,1516916805.007 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:45.188Z,1516916805.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:45.327Z,1516916805.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:45.656Z,1516916805.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:46.059Z,1516916806.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:46.206Z,1516916806.206 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:46.207Z,1516916806.207 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:46.458Z,1516916806.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:46.850Z,1516916806.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:47.266Z,1516916807.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:47.406Z,1516916807.406 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:47.407Z,1516916807.407 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:47.663Z,1516916807.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:48.015Z,1516916808.015 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:48.019Z,1516916808.019 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:48.074Z,1516916808.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:48.466Z,1516916808.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:48.841Z,1516916808.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:49.219Z,1516916809.219 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:49.220Z,1516916809.220 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:49.274Z,1516916809.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:49.646Z,1516916809.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:50.071Z,1516916810.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:50.418Z,1516916810.418 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:50.420Z,1516916810.420 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:50.478Z,1516916810.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:50.875Z,1516916810.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:51.015Z,1516916811.015 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:51.017Z,1516916811.017 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:51.256Z,1516916811.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:51.657Z,1516916811.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:52.067Z,1516916812.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:52.218Z,1516916812.218 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:52.220Z,1516916812.220 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:52.464Z,1516916812.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:52.851Z,1516916812.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:53.260Z,1516916813.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:53.418Z,1516916813.418 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:53.419Z,1516916813.419 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:53.662Z,1516916813.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:54.019Z,1516916814.019 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:54.021Z,1516916814.021 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:54.082Z,1516916814.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:54.466Z,1516916814.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:54.846Z,1516916814.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:55.223Z,1516916815.223 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:55.224Z,1516916815.224 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:55.245Z,1516916815.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:55.650Z,1516916815.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:56.076Z,1516916816.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:56.422Z,1516916816.422 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:56.423Z,1516916816.423 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:56.459Z,1516916816.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:56.858Z,1516916816.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:57.024Z,1516916817.024 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:57.025Z,1516916817.025 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:57.248Z,1516916817.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:57.651Z,1516916817.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:58.057Z,1516916818.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:58.226Z,1516916818.226 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:58.227Z,1516916818.227 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:58.452Z,1516916818.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:58.847Z,1516916818.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:59.259Z,1516916819.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:46:59.426Z,1516916819.426 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:46:59.427Z,1516916819.427 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:46:59.658Z,1516916819.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:00.031Z,1516916820.031 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:00.032Z,1516916820.032 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:00.064Z,1516916820.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:00.458Z,1516916820.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:00.847Z,1516916820.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:01.230Z,1516916821.230 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:01.231Z,1516916821.231 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:01.259Z,1516916821.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:01.658Z,1516916821.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:02.070Z,1516916822.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:02.430Z,1516916822.430 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:02.431Z,1516916822.431 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:02.482Z,1516916822.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:02.867Z,1516916822.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:03.033Z,1516916823.033 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:03.035Z,1516916823.035 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:03.258Z,1516916823.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:03.659Z,1516916823.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:04.078Z,1516916824.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:04.234Z,1516916824.234 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:04.235Z,1516916824.235 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:04.459Z,1516916824.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:04.859Z,1516916824.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:05.268Z,1516916825.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:05.434Z,1516916825.434 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:05.435Z,1516916825.435 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:05.665Z,1516916825.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:06.038Z,1516916826.038 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:06.039Z,1516916826.039 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:06.094Z,1516916826.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:06.468Z,1516916826.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:06.841Z,1516916826.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:07.238Z,1516916827.238 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:07.239Z,1516916827.239 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:07.245Z,1516916827.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:07.646Z,1516916827.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:08.072Z,1516916828.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:08.438Z,1516916828.438 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:08.439Z,1516916828.439 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:08.487Z,1516916828.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:08.872Z,1516916828.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:09.042Z,1516916829.042 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:09.044Z,1516916829.044 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:09.258Z,1516916829.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:09.646Z,1516916829.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:10.063Z,1516916830.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:10.242Z,1516916830.242 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:10.243Z,1516916830.243 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:10.454Z,1516916830.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:10.852Z,1516916830.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:11.258Z,1516916831.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:11.442Z,1516916831.442 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:11.443Z,1516916831.443 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:11.655Z,1516916831.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:12.055Z,1516916832.055 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:12.057Z,1516916832.057 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:12.074Z,1516916832.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:12.447Z,1516916832.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:12.852Z,1516916832.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:13.250Z,1516916833.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:13.258Z,1516916833.258 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:13.259Z,1516916833.259 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:13.652Z,1516916833.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:14.078Z,1516916834.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:14.458Z,1516916834.458 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:14.460Z,1516916834.460 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:14.466Z,1516916834.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:14.867Z,1516916834.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:15.052Z,1516916835.052 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:15.054Z,1516916835.054 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:15.259Z,1516916835.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:15.652Z,1516916835.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:16.065Z,1516916836.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:16.254Z,1516916836.254 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:16.255Z,1516916836.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:16.459Z,1516916836.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:16.859Z,1516916836.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:17.268Z,1516916837.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:17.454Z,1516916837.454 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:17.455Z,1516916837.455 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:17.665Z,1516916837.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:18.060Z,1516916838.060 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:18.062Z,1516916838.062 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:18.081Z,1516916838.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:18.446Z,1516916838.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:18.846Z,1516916838.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:19.246Z,1516916839.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:19.262Z,1516916839.262 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:19.263Z,1516916839.263 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:19.650Z,1516916839.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:20.079Z,1516916840.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:20.462Z,1516916840.462 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:20.463Z,1516916840.463 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:20.471Z,1516916840.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:20.881Z,1516916840.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:21.061Z,1516916841.061 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:21.062Z,1516916841.062 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:21.258Z,1516916841.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:21.650Z,1516916841.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:22.058Z,1516916842.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:22.262Z,1516916842.262 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:22.263Z,1516916842.263 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:22.462Z,1516916842.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:22.849Z,1516916842.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:23.266Z,1516916843.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:23.462Z,1516916843.462 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:23.463Z,1516916843.463 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:23.670Z,1516916843.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:24.066Z,1516916844.066 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:24.067Z,1516916844.067 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:24.098Z,1516916844.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:24.463Z,1516916844.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:24.858Z,1516916844.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:25.258Z,1516916845.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:25.267Z,1516916845.267 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:25.268Z,1516916845.268 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:25.662Z,1516916845.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:26.088Z,1516916846.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:26.466Z,1516916846.466 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:26.467Z,1516916846.467 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:26.473Z,1516916846.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:26.861Z,1516916846.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:27.070Z,1516916847.070 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:27.072Z,1516916847.072 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:27.263Z,1516916847.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:27.662Z,1516916847.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:28.089Z,1516916848.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:28.270Z,1516916848.270 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:28.271Z,1516916848.271 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:28.465Z,1516916848.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:28.867Z,1516916848.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:29.246Z,1516916849.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:29.470Z,1516916849.470 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:29.471Z,1516916849.471 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:29.641Z,1516916849.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:30.075Z,1516916850.075 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:30.080Z,1516916850.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:30.081Z,1516916850.081 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:30.473Z,1516916850.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:30.855Z,1516916850.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:31.250Z,1516916851.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:31.282Z,1516916851.282 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:31.283Z,1516916851.283 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:31.651Z,1516916851.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:32.081Z,1516916852.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:32.462Z,1516916852.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:32.482Z,1516916852.482 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:32.483Z,1516916852.483 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:32.866Z,1516916852.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:33.080Z,1516916853.080 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:33.081Z,1516916853.081 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:33.254Z,1516916853.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:33.650Z,1516916853.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:34.095Z,1516916854.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:34.282Z,1516916854.282 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:34.283Z,1516916854.283 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:34.470Z,1516916854.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:34.866Z,1516916854.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:35.251Z,1516916855.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:35.482Z,1516916855.482 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:35.483Z,1516916855.483 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:35.650Z,1516916855.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:36.084Z,1516916856.084 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:36.086Z,1516916856.086 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:36.093Z,1516916856.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:36.474Z,1516916856.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:36.859Z,1516916856.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:37.250Z,1516916857.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:37.294Z,1516916857.294 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:37.295Z,1516916857.295 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:37.661Z,1516916857.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:38.087Z,1516916858.087 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:38.089Z,1516916858.089 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:38.099Z,1516916858.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:38.463Z,1516916858.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:38.868Z,1516916858.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:39.241Z,1516916859.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:39.290Z,1516916859.290 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:39.291Z,1516916859.291 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:39.661Z,1516916859.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:40.055Z,1516916860.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:40.455Z,1516916860.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:40.490Z,1516916860.490 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:40.492Z,1516916860.492 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:40.851Z,1516916860.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:41.092Z,1516916861.092 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:41.093Z,1516916861.093 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:41.257Z,1516916861.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:41.648Z,1516916861.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:42.062Z,1516916862.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:42.294Z,1516916862.294 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:42.295Z,1516916862.295 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:43.494Z,1516916863.494 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:43.495Z,1516916863.495 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:44.125Z,1516916864.125 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:44.126Z,1516916864.126 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:45.303Z,1516916865.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:45.355Z,1516916865.355 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:45.356Z,1516916865.356 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:45.443Z,1516916865.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:45.771Z,1516916865.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:46.100Z,1516916866.100 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:46.101Z,1516916866.101 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:46.175Z,1516916866.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:46.570Z,1516916866.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:46.974Z,1516916866.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:47.302Z,1516916867.302 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:47.303Z,1516916867.303 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:47.375Z,1516916867.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:47.782Z,1516916867.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:48.175Z,1516916868.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:48.502Z,1516916868.502 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:48.503Z,1516916868.503 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:48.571Z,1516916868.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:48.975Z,1516916868.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:49.104Z,1516916869.104 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:49.107Z,1516916869.107 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:49.374Z,1516916869.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:49.776Z,1516916869.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:50.178Z,1516916870.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:50.307Z,1516916870.307 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:50.309Z,1516916870.309 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:50.581Z,1516916870.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:50.986Z,1516916870.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:51.374Z,1516916871.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:51.510Z,1516916871.510 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:51.511Z,1516916871.511 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:51.771Z,1516916871.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:52.109Z,1516916872.109 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:52.110Z,1516916872.110 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:52.166Z,1516916872.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:52.566Z,1516916872.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:52.978Z,1516916872.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:53.310Z,1516916873.310 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:53.311Z,1516916873.311 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:53.381Z,1516916873.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:53.781Z,1516916873.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:54.183Z,1516916874.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:54.510Z,1516916874.510 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:54.511Z,1516916874.511 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:54.571Z,1516916874.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:54.964Z,1516916874.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:55.114Z,1516916875.114 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:55.115Z,1516916875.115 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:55.364Z,1516916875.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:55.766Z,1516916875.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:56.182Z,1516916876.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:56.314Z,1516916876.314 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:56.315Z,1516916876.315 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:56.575Z,1516916876.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:56.974Z,1516916876.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:57.364Z,1516916877.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:57.514Z,1516916877.514 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:57.515Z,1516916877.515 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:57.771Z,1516916877.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:58.118Z,1516916878.118 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:58.119Z,1516916878.119 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:58.183Z,1516916878.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:58.574Z,1516916878.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:58.974Z,1516916878.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:59.318Z,1516916879.318 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:47:59.319Z,1516916879.319 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:47:59.402Z,1516916879.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:47:59.783Z,1516916879.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:00.179Z,1516916880.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:00.518Z,1516916880.518 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:00.519Z,1516916880.519 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:00.594Z,1516916880.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:00.983Z,1516916880.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:01.123Z,1516916881.123 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:01.124Z,1516916881.124 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:01.386Z,1516916881.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:01.756Z,1516916881.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:02.184Z,1516916882.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:02.322Z,1516916882.322 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:02.323Z,1516916882.323 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:02.583Z,1516916882.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:02.980Z,1516916882.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:03.362Z,1516916883.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:03.522Z,1516916883.522 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:03.523Z,1516916883.523 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:03.768Z,1516916883.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:04.134Z,1516916884.134 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:04.136Z,1516916884.136 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:04.170Z,1516916884.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:04.565Z,1516916884.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:04.964Z,1516916884.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:05.334Z,1516916885.334 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:05.335Z,1516916885.335 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:05.396Z,1516916885.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:05.771Z,1516916885.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:06.197Z,1516916886.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:06.534Z,1516916886.534 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:06.535Z,1516916886.535 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:06.590Z,1516916886.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:06.972Z,1516916886.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:07.132Z,1516916887.132 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:07.133Z,1516916887.133 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:07.374Z,1516916887.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:07.767Z,1516916887.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:08.178Z,1516916888.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:08.334Z,1516916888.334 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:08.335Z,1516916888.335 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:08.578Z,1516916888.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:08.974Z,1516916888.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:09.365Z,1516916889.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:09.534Z,1516916889.534 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:09.535Z,1516916889.535 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:09.771Z,1516916889.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:10.137Z,1516916890.137 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:10.139Z,1516916890.139 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:10.194Z,1516916890.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:10.578Z,1516916890.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:10.974Z,1516916890.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:11.338Z,1516916891.338 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:11.339Z,1516916891.339 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:11.400Z,1516916891.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:11.790Z,1516916891.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:12.190Z,1516916892.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:12.203Z,1516916892.203 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-25T21:48:12.538Z,1516916892.538 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:12.539Z,1516916892.539 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:12.566Z,1516916892.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:12.965Z,1516916892.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:13.141Z,1516916893.141 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:13.143Z,1516916893.143 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:13.393Z,1516916893.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:13.765Z,1516916893.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:14.190Z,1516916894.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:14.342Z,1516916894.342 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:14.343Z,1516916894.343 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:14.588Z,1516916894.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:14.972Z,1516916894.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:15.363Z,1516916895.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:15.542Z,1516916895.542 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:15.543Z,1516916895.543 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:15.770Z,1516916895.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:16.170Z,1516916896.170 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:16.172Z,1516916896.172 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:16.179Z,1516916896.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:16.568Z,1516916896.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:16.963Z,1516916896.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:17.370Z,1516916897.370 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:17.371Z,1516916897.371 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:17.377Z,1516916897.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:17.776Z,1516916897.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:18.149Z,1516916898.149 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:18.150Z,1516916898.150 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:18.203Z,1516916898.203 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:18.203Z,1516916898.203 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 10
2018-01-25T21:48:18.203Z,1516916898.203 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-25T21:48:18.209Z,1516916898.209 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:18.209Z,1516916898.209 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10
2018-01-25T21:48:18.209Z,1516916898.209 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-25T21:48:18.211Z,1516916898.211 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:18.211Z,1516916898.211 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-01-25T21:48:18.211Z,1516916898.211 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-25T21:48:18.235Z,1516916898.235 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-25T21:48:18.235Z,1516916898.235 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-25T21:48:18.236Z,1516916898.236 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-25T21:48:18.584Z,1516916898.584 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-25T21:48:18.584Z,1516916898.584 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 10
2018-01-25T21:48:18.584Z,1516916898.584 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-25T21:48:18.584Z,1516916898.584 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10
2018-01-25T21:48:18.585Z,1516916898.585 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-25T21:48:18.585Z,1516916898.585 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-01-25T21:48:18.974Z,1516916898.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-25T21:48:18.974Z,1516916898.974 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T21:48:18.974Z,1516916898.974 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T21:48:18.975Z,1516916898.975 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-25T21:48:18.975Z,1516916898.975 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T21:48:18.975Z,1516916898.975 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T21:48:18.976Z,1516916898.976 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-25T21:48:18.976Z,1516916898.976 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T21:48:18.977Z,1516916898.977 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T21:48:19.351Z,1516916899.351 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:19.352Z,1516916899.352 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:19.391Z,1516916899.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-25T21:48:19.392Z,1516916899.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:19.774Z,1516916899.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-25T21:48:19.775Z,1516916899.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:20.190Z,1516916900.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-25T21:48:20.191Z,1516916900.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:20.550Z,1516916900.550 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:20.551Z,1516916900.551 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:20.594Z,1516916900.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-25T21:48:20.595Z,1516916900.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:20.978Z,1516916900.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-25T21:48:20.979Z,1516916900.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:21.154Z,1516916901.154 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:21.155Z,1516916901.155 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:21.356Z,1516916901.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-25T21:48:21.357Z,1516916901.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:21.766Z,1516916901.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-25T21:48:21.766Z,1516916901.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:22.192Z,1516916902.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-25T21:48:22.193Z,1516916902.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:22.354Z,1516916902.354 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:22.355Z,1516916902.355 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:22.565Z,1516916902.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-25T21:48:22.566Z,1516916902.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:22.970Z,1516916902.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-25T21:48:22.971Z,1516916902.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:23.395Z,1516916903.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-25T21:48:23.396Z,1516916903.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:23.554Z,1516916903.554 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010810 psu
2018-01-25T21:48:23.555Z,1516916903.555 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:23.795Z,1516916903.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-25T21:48:23.797Z,1516916903.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:24.161Z,1516916904.161 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:24.162Z,1516916904.162 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:24.202Z,1516916904.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-25T21:48:24.203Z,1516916904.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:24.570Z,1516916904.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-25T21:48:24.571Z,1516916904.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:24.975Z,1516916904.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-25T21:48:24.976Z,1516916904.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:25.362Z,1516916905.362 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:25.363Z,1516916905.363 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:25.370Z,1516916905.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-25T21:48:25.371Z,1516916905.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:25.774Z,1516916905.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-25T21:48:25.775Z,1516916905.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:26.202Z,1516916906.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-25T21:48:26.203Z,1516916906.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:26.563Z,1516916906.563 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:26.564Z,1516916906.564 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:26.586Z,1516916906.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-25T21:48:26.587Z,1516916906.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:26.990Z,1516916906.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-25T21:48:26.991Z,1516916906.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:27.163Z,1516916907.163 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010820 psu
2018-01-25T21:48:27.164Z,1516916907.164 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:27.368Z,1516916907.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-25T21:48:27.373Z,1516916907.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:27.774Z,1516916907.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-25T21:48:27.775Z,1516916907.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:28.186Z,1516916908.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-25T21:48:28.187Z,1516916908.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:28.366Z,1516916908.366 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010810 psu
2018-01-25T21:48:28.367Z,1516916908.367 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:28.575Z,1516916908.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-25T21:48:28.576Z,1516916908.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:28.974Z,1516916908.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-25T21:48:28.975Z,1516916908.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:29.384Z,1516916909.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-25T21:48:29.385Z,1516916909.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:29.566Z,1516916909.566 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:29.567Z,1516916909.567 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:29.779Z,1516916909.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-25T21:48:29.780Z,1516916909.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:30.184Z,1516916910.184 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:30.186Z,1516916910.186 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:30.190Z,1516916910.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-25T21:48:30.190Z,1516916910.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:30.556Z,1516916910.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-25T21:48:30.565Z,1516916910.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:30.956Z,1516916910.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-25T21:48:30.957Z,1516916910.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:31.362Z,1516916911.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-25T21:48:31.363Z,1516916911.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:31.386Z,1516916911.386 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:31.387Z,1516916911.387 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:31.762Z,1516916911.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-25T21:48:31.763Z,1516916911.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:32.180Z,1516916912.180 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:32.181Z,1516916912.181 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:32.198Z,1516916912.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-25T21:48:32.199Z,1516916912.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:32.575Z,1516916912.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-25T21:48:32.576Z,1516916912.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:32.973Z,1516916912.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-25T21:48:32.974Z,1516916912.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:33.362Z,1516916913.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-25T21:48:33.363Z,1516916913.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:33.390Z,1516916913.390 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:33.391Z,1516916913.391 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:33.771Z,1516916913.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-25T21:48:33.772Z,1516916913.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:34.174Z,1516916914.174 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:34.176Z,1516916914.176 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:34.187Z,1516916914.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-25T21:48:34.188Z,1516916914.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:34.565Z,1516916914.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-25T21:48:34.566Z,1516916914.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:34.973Z,1516916914.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-25T21:48:34.974Z,1516916914.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:35.374Z,1516916915.374 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:35.375Z,1516916915.375 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:35.377Z,1516916915.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-25T21:48:35.378Z,1516916915.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:35.775Z,1516916915.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-25T21:48:35.776Z,1516916915.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:36.186Z,1516916916.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-25T21:48:36.187Z,1516916916.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:36.569Z,1516916916.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-25T21:48:36.570Z,1516916916.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:36.574Z,1516916916.574 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:36.575Z,1516916916.575 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:36.964Z,1516916916.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-25T21:48:36.965Z,1516916916.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:37.178Z,1516916917.178 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:37.180Z,1516916917.180 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:37.377Z,1516916917.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-25T21:48:37.378Z,1516916917.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:37.766Z,1516916917.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-25T21:48:37.767Z,1516916917.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:38.194Z,1516916918.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-25T21:48:38.195Z,1516916918.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:38.378Z,1516916918.378 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:38.379Z,1516916918.379 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:38.583Z,1516916918.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:38.987Z,1516916918.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:39.366Z,1516916919.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:39.578Z,1516916919.578 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:39.579Z,1516916919.579 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:39.778Z,1516916919.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:40.183Z,1516916920.183 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:40.185Z,1516916920.185 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:40.207Z,1516916920.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:40.587Z,1516916920.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:40.975Z,1516916920.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:41.370Z,1516916921.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:41.386Z,1516916921.386 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:41.387Z,1516916921.387 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:41.764Z,1516916921.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:41.771Z,1516916921.771 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-25T21:43:41.5Z
2018-01-25T21:48:41.772Z,1516916921.772 [Default:CheckIn:Read_GPS] Stopped
2018-01-25T21:48:41.772Z,1516916921.772 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-25T21:48:42.194Z,1516916922.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:42.586Z,1516916922.586 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:42.587Z,1516916922.587 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:43.188Z,1516916923.188 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:43.189Z,1516916923.189 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:44.390Z,1516916924.390 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:44.391Z,1516916924.391 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:45.574Z,1516916925.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:45.590Z,1516916925.590 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:45.591Z,1516916925.591 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:45.653Z,1516916925.653 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180125T211802/Courier0012.lzma
2018-01-25T21:48:45.718Z,1516916925.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:46.074Z,1516916926.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:46.192Z,1516916926.192 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:46.194Z,1516916926.194 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:46.403Z,1516916926.403 [DataOverHttps](INFO): Moved sent file to Logs/20180125T211802/Courier0012.lzma.bak
2018-01-25T21:48:46.403Z,1516916926.403 [DataOverHttps](INFO): SBD MOMSN=7761288
2018-01-25T21:48:46.460Z,1516916926.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:47.262Z,1516916927.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:47.389Z,1516916927.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:47.394Z,1516916927.394 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:47.395Z,1516916927.395 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:48.594Z,1516916928.594 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:48.595Z,1516916928.595 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:49.197Z,1516916929.197 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:49.198Z,1516916929.198 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:50.398Z,1516916930.398 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:50.399Z,1516916930.399 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:50.632Z,1516916930.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:50.783Z,1516916930.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:51.104Z,1516916931.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:51.510Z,1516916931.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:51.597Z,1516916931.597 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:48:51.598Z,1516916931.598 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:51.600Z,1516916931.600 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:51.914Z,1516916931.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:52.001Z,1516916932.001 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:48:52.202Z,1516916932.202 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:52.204Z,1516916932.204 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:52.308Z,1516916932.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:52.605Z,1516916932.605 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:48:53.401Z,1516916933.401 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:48:53.402Z,1516916933.402 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:53.404Z,1516916933.404 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:53.805Z,1516916933.805 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:48:54.601Z,1516916934.601 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:48:54.602Z,1516916934.602 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:54.604Z,1516916934.604 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:55.005Z,1516916935.005 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:48:55.206Z,1516916935.206 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:55.208Z,1516916935.208 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:55.560Z,1516916935.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:55.637Z,1516916935.637 [DataOverHttps](INFO): Sending 144 bytes from file Logs/20180125T211802/Express0013.lzma
2018-01-25T21:48:55.706Z,1516916935.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:56.063Z,1516916936.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:56.406Z,1516916936.406 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:56.407Z,1516916936.407 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:56.419Z,1516916936.419 [DataOverHttps](INFO): Moved sent file to Logs/20180125T211802/Express0013.lzma.bak
2018-01-25T21:48:56.419Z,1516916936.419 [DataOverHttps](INFO): SBD MOMSN=7761290
2018-01-25T21:48:56.474Z,1516916936.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:57.222Z,1516916937.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:57.225Z,1516916937.225 [Default:CheckIn:Read_Iridium] Stopped
2018-01-25T21:48:57.225Z,1516916937.225 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-25T21:48:57.225Z,1516916937.225 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-25T21:48:57.354Z,1516916937.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:48:57.606Z,1516916937.606 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:57.607Z,1516916937.607 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:58.211Z,1516916938.211 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:58.213Z,1516916938.213 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:48:59.415Z,1516916939.415 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:48:59.416Z,1516916939.416 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:00.561Z,1516916940.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:00.614Z,1516916940.614 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:00.615Z,1516916940.615 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:00.706Z,1516916940.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:01.033Z,1516916941.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:01.216Z,1516916941.216 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:01.217Z,1516916941.217 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:01.431Z,1516916941.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:01.839Z,1516916941.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:02.234Z,1516916942.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:02.418Z,1516916942.418 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:02.419Z,1516916942.419 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:02.636Z,1516916942.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:03.030Z,1516916943.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:03.434Z,1516916943.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:03.618Z,1516916943.618 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:03.619Z,1516916943.619 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:03.842Z,1516916943.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:04.232Z,1516916944.232 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:04.233Z,1516916944.233 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:04.255Z,1516916944.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:04.628Z,1516916944.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:05.032Z,1516916945.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:05.422Z,1516916945.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:05.434Z,1516916945.434 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:05.435Z,1516916945.435 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:05.830Z,1516916945.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:06.252Z,1516916946.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:06.635Z,1516916946.635 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:06.636Z,1516916946.636 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:06.637Z,1516916946.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:07.041Z,1516916947.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:07.225Z,1516916947.225 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:07.226Z,1516916947.226 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:07.433Z,1516916947.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:07.904Z,1516916947.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:08.236Z,1516916948.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:08.426Z,1516916948.426 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:08.427Z,1516916948.427 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:08.633Z,1516916948.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:09.027Z,1516916949.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:09.433Z,1516916949.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:09.626Z,1516916949.626 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:09.627Z,1516916949.627 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:09.842Z,1516916949.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:10.230Z,1516916950.230 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:10.231Z,1516916950.231 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:10.258Z,1516916950.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:10.631Z,1516916950.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:11.033Z,1516916951.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:11.426Z,1516916951.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:11.430Z,1516916951.430 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:11.431Z,1516916951.431 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:11.813Z,1516916951.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:12.285Z,1516916952.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:12.630Z,1516916952.630 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:12.631Z,1516916952.631 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:12.662Z,1516916952.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:13.027Z,1516916953.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:13.234Z,1516916953.234 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:13.236Z,1516916953.236 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:13.422Z,1516916953.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:13.817Z,1516916953.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:14.239Z,1516916954.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:14.434Z,1516916954.434 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:14.435Z,1516916954.435 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:14.658Z,1516916954.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:15.022Z,1516916955.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:15.423Z,1516916955.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:15.633Z,1516916955.633 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:49:15.634Z,1516916955.634 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T21:49:15.636Z,1516916955.636 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:15.827Z,1516916955.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:16.037Z,1516916956.037 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:49:16.239Z,1516916956.239 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:16.240Z,1516916956.240 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:16.247Z,1516916956.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:16.664Z,1516916956.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:17.022Z,1516916957.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:17.413Z,1516916957.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:17.458Z,1516916957.458 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:17.459Z,1516916957.459 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:17.818Z,1516916957.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:18.242Z,1516916958.242 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:18.243Z,1516916958.243 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:18.249Z,1516916958.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:18.627Z,1516916958.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:18.645Z,1516916958.645 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:49:19.027Z,1516916959.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:19.421Z,1516916959.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:19.441Z,1516916959.441 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:49:19.442Z,1516916959.442 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:19.444Z,1516916959.444 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:19.826Z,1516916959.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:19.845Z,1516916959.845 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:49:20.250Z,1516916960.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:20.641Z,1516916960.641 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:49:20.642Z,1516916960.642 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:20.643Z,1516916960.643 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:20.645Z,1516916960.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:21.031Z,1516916961.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:21.045Z,1516916961.045 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:49:21.246Z,1516916961.246 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:21.248Z,1516916961.248 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:21.431Z,1516916961.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:21.649Z,1516916961.649 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:49:21.833Z,1516916961.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:22.255Z,1516916962.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:22.445Z,1516916962.445 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:49:22.446Z,1516916962.446 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:22.448Z,1516916962.448 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:22.637Z,1516916962.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:22.849Z,1516916962.849 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:49:23.103Z,1516916963.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:23.429Z,1516916963.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:23.645Z,1516916963.645 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:49:23.646Z,1516916963.646 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:23.648Z,1516916963.648 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:23.834Z,1516916963.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:24.049Z,1516916964.049 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:49:24.251Z,1516916964.251 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:24.253Z,1516916964.253 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:24.286Z,1516916964.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:24.637Z,1516916964.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:24.657Z,1516916964.657 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:49:25.035Z,1516916965.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:25.418Z,1516916965.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:25.453Z,1516916965.453 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:49:25.454Z,1516916965.454 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:25.456Z,1516916965.456 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:25.820Z,1516916965.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:25.857Z,1516916965.857 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:49:26.259Z,1516916966.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:26.646Z,1516916966.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:26.654Z,1516916966.654 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:26.655Z,1516916966.655 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:27.048Z,1516916967.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:27.255Z,1516916967.255 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:27.257Z,1516916967.257 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:27.426Z,1516916967.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:27.824Z,1516916967.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:28.239Z,1516916968.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:28.459Z,1516916968.459 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:28.460Z,1516916968.460 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:28.642Z,1516916968.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:29.032Z,1516916969.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:29.421Z,1516916969.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:29.658Z,1516916969.658 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:29.659Z,1516916969.659 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:29.824Z,1516916969.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:30.242Z,1516916970.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:30.288Z,1516916970.288 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:30.290Z,1516916970.290 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:30.634Z,1516916970.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:31.039Z,1516916971.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:31.431Z,1516916971.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:31.490Z,1516916971.490 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:49:31.491Z,1516916971.491 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:31.825Z,1516916971.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:32.255Z,1516916972.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:32.268Z,1516916972.268 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:49:32.269Z,1516916972.269 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:32.638Z,1516916972.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:33.030Z,1516916973.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:33.429Z,1516916973.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:33.470Z,1516916973.470 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:33.471Z,1516916973.471 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:33.839Z,1516916973.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:34.255Z,1516916974.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:34.638Z,1516916974.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:34.670Z,1516916974.670 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:34.671Z,1516916974.671 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:35.046Z,1516916975.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:35.268Z,1516916975.268 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:35.269Z,1516916975.269 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:35.430Z,1516916975.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:35.817Z,1516916975.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:36.265Z,1516916976.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:36.470Z,1516916976.470 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:36.471Z,1516916976.471 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:36.645Z,1516916976.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:37.050Z,1516916977.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:37.423Z,1516916977.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:37.670Z,1516916977.670 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:37.671Z,1516916977.671 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:37.822Z,1516916977.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:38.229Z,1516916978.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:38.273Z,1516916978.273 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:38.274Z,1516916978.274 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:38.656Z,1516916978.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:39.031Z,1516916979.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:39.430Z,1516916979.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:39.474Z,1516916979.474 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:39.475Z,1516916979.475 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:39.871Z,1516916979.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:40.236Z,1516916980.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:40.637Z,1516916980.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:40.674Z,1516916980.674 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:49:40.674Z,1516916980.674 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:40.676Z,1516916980.676 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:41.038Z,1516916981.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:41.077Z,1516916981.077 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:49:41.277Z,1516916981.277 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:41.279Z,1516916981.279 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:41.430Z,1516916981.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:41.681Z,1516916981.681 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:49:41.832Z,1516916981.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:42.236Z,1516916982.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:42.477Z,1516916982.477 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:49:42.478Z,1516916982.478 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:42.480Z,1516916982.480 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:42.640Z,1516916982.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:42.881Z,1516916982.881 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:49:43.038Z,1516916983.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:43.431Z,1516916983.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:43.677Z,1516916983.677 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:49:43.678Z,1516916983.678 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:43.679Z,1516916983.679 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:43.825Z,1516916983.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:44.081Z,1516916984.081 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:49:44.230Z,1516916984.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:44.282Z,1516916984.282 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:44.283Z,1516916984.283 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:44.650Z,1516916984.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:44.685Z,1516916984.685 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:49:45.040Z,1516916985.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:45.450Z,1516916985.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:45.481Z,1516916985.481 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:49:45.482Z,1516916985.482 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:45.484Z,1516916985.484 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:45.885Z,1516916985.885 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:49:45.890Z,1516916985.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:46.240Z,1516916986.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:46.646Z,1516916986.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:46.681Z,1516916986.681 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:49:46.682Z,1516916986.682 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:46.684Z,1516916986.684 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:47.062Z,1516916987.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:47.085Z,1516916987.085 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:49:47.288Z,1516916987.288 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:47.290Z,1516916987.290 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:47.434Z,1516916987.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:47.842Z,1516916987.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:48.248Z,1516916988.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:48.490Z,1516916988.490 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:48.491Z,1516916988.491 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:48.650Z,1516916988.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:49.052Z,1516916989.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:49.429Z,1516916989.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:49.690Z,1516916989.690 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010844 psu
2018-01-25T21:49:49.691Z,1516916989.691 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:49.844Z,1516916989.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:50.286Z,1516916990.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:50.293Z,1516916990.293 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010810 psu
2018-01-25T21:49:50.294Z,1516916990.294 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:50.641Z,1516916990.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:51.043Z,1516916991.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:51.454Z,1516916991.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:51.494Z,1516916991.494 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010820 psu
2018-01-25T21:49:51.495Z,1516916991.495 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:51.835Z,1516916991.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:52.258Z,1516916992.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:52.655Z,1516916992.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:52.694Z,1516916992.694 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:49:52.696Z,1516916992.696 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:53.045Z,1516916993.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:53.296Z,1516916993.296 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:53.297Z,1516916993.297 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:53.434Z,1516916993.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:53.923Z,1516916993.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:54.258Z,1516916994.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:54.498Z,1516916994.498 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:54.499Z,1516916994.499 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:54.635Z,1516916994.635 [PNI_TCM](ERROR): CRC does not match. Expected:0x64727 got:0x28682
2018-01-25T21:49:54.658Z,1516916994.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:55.077Z,1516916995.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:55.474Z,1516916995.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:55.698Z,1516916995.698 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010810 psu
2018-01-25T21:49:55.700Z,1516916995.700 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:55.840Z,1516916995.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:56.272Z,1516916996.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:56.305Z,1516916996.305 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:56.306Z,1516916996.306 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:56.642Z,1516916996.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:57.043Z,1516916997.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:57.466Z,1516916997.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:57.506Z,1516916997.506 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:57.507Z,1516916997.507 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:57.866Z,1516916997.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:49:58.705Z,1516916998.705 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:49:58.706Z,1516916998.706 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:58.708Z,1516916998.708 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:59.109Z,1516916999.109 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:49:59.305Z,1516916999.305 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:49:59.307Z,1516916999.307 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:49:59.709Z,1516916999.709 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:00.507Z,1516917000.507 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:00.508Z,1516917000.508 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:50:00.510Z,1516917000.510 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:00.913Z,1516917000.913 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:01.709Z,1516917001.709 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:01.710Z,1516917001.710 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:50:01.711Z,1516917001.711 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:02.113Z,1516917002.113 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:02.310Z,1516917002.310 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:50:02.311Z,1516917002.311 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:02.639Z,1516917002.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:02.713Z,1516917002.713 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:02.766Z,1516917002.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:03.123Z,1516917003.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:03.509Z,1516917003.509 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:03.510Z,1516917003.510 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:50:03.512Z,1516917003.512 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:03.524Z,1516917003.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:03.913Z,1516917003.913 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:03.924Z,1516917003.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:04.343Z,1516917004.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:04.709Z,1516917004.709 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:04.710Z,1516917004.710 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:50:04.711Z,1516917004.711 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:04.738Z,1516917004.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:05.113Z,1516917005.113 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:05.129Z,1516917005.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:05.314Z,1516917005.314 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:50:05.316Z,1516917005.316 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:05.526Z,1516917005.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:05.717Z,1516917005.717 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:05.922Z,1516917005.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:06.333Z,1516917006.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:06.513Z,1516917006.513 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:06.514Z,1516917006.514 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:50:06.516Z,1516917006.516 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:06.723Z,1516917006.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:06.917Z,1516917006.917 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:07.120Z,1516917007.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:07.527Z,1516917007.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:07.713Z,1516917007.713 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:07.714Z,1516917007.714 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:50:07.716Z,1516917007.716 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:07.931Z,1516917007.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:08.117Z,1516917008.117 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:08.319Z,1516917008.319 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:50:08.321Z,1516917008.321 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:08.347Z,1516917008.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:08.717Z,1516917008.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:08.725Z,1516917008.725 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:09.122Z,1516917009.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:09.521Z,1516917009.521 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:09.522Z,1516917009.522 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:50:09.524Z,1516917009.524 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:09.602Z,1516917009.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:09.925Z,1516917009.925 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:09.927Z,1516917009.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:10.350Z,1516917010.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:10.721Z,1516917010.721 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:10.722Z,1516917010.722 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:50:10.724Z,1516917010.724 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:10.768Z,1516917010.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:11.125Z,1516917011.125 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:11.134Z,1516917011.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:11.324Z,1516917011.324 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:50:11.326Z,1516917011.326 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:11.531Z,1516917011.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:11.729Z,1516917011.729 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:11.934Z,1516917011.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:12.335Z,1516917012.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:12.525Z,1516917012.525 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:12.526Z,1516917012.526 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:50:12.528Z,1516917012.528 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:12.738Z,1516917012.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:12.929Z,1516917012.929 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:13.126Z,1516917013.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:13.534Z,1516917013.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:13.725Z,1516917013.725 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:13.726Z,1516917013.726 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:50:13.728Z,1516917013.728 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:13.939Z,1516917013.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:14.129Z,1516917014.129 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:14.332Z,1516917014.332 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:50:14.333Z,1516917014.333 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:14.364Z,1516917014.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:14.729Z,1516917014.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:14.737Z,1516917014.737 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:15.138Z,1516917015.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:15.522Z,1516917015.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:15.533Z,1516917015.533 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:15.534Z,1516917015.534 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:50:15.536Z,1516917015.536 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:15.922Z,1516917015.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:15.937Z,1516917015.937 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:16.352Z,1516917016.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:16.733Z,1516917016.733 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:16.734Z,1516917016.734 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:50:16.735Z,1516917016.735 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:16.762Z,1516917016.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:17.127Z,1516917017.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:17.137Z,1516917017.137 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:17.333Z,1516917017.333 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:50:17.334Z,1516917017.334 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:17.530Z,1516917017.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:17.737Z,1516917017.737 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:17.930Z,1516917017.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:18.340Z,1516917018.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:18.533Z,1516917018.533 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:18.534Z,1516917018.534 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T21:50:18.536Z,1516917018.536 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:18.733Z,1516917018.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:18.937Z,1516917018.937 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:19.126Z,1516917019.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:19.486Z,1516917019.486 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-25T21:50:19.486Z,1516917019.486 [NAL9602] Data Fault, FailCount= 3
2018-01-25T21:50:19.486Z,1516917019.486 [NAL9602](ERROR): Data Fault
2018-01-25T21:50:19.524Z,1516917019.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:19.557Z,1516917019.557 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-25T21:50:19.733Z,1516917019.733 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:19.734Z,1516917019.734 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:50:19.736Z,1516917019.736 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:19.890Z,1516917019.890 [NAL9602](INFO): Powering down
2018-01-25T21:50:19.942Z,1516917019.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:20.137Z,1516917020.137 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:20.338Z,1516917020.338 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:50:20.339Z,1516917020.339 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:20.350Z,1516917020.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:20.725Z,1516917020.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:20.737Z,1516917020.737 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-25T21:50:20.737Z,1516917020.737 [NAL9602] No Fault, FailCount= 3
2018-01-25T21:50:20.741Z,1516917020.741 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:21.124Z,1516917021.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:21.530Z,1516917021.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:21.537Z,1516917021.537 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:21.538Z,1516917021.538 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:50:21.540Z,1516917021.540 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:21.927Z,1516917021.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:21.941Z,1516917021.941 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:22.355Z,1516917022.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:22.729Z,1516917022.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:22.737Z,1516917022.737 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:22.738Z,1516917022.738 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:50:22.739Z,1516917022.739 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:23.132Z,1516917023.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:23.141Z,1516917023.141 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:23.342Z,1516917023.342 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:50:23.343Z,1516917023.343 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:23.521Z,1516917023.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:23.745Z,1516917023.745 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:23.922Z,1516917023.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:24.343Z,1516917024.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:24.541Z,1516917024.541 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:24.542Z,1516917024.542 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:50:24.544Z,1516917024.544 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:24.726Z,1516917024.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:24.945Z,1516917024.945 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:25.126Z,1516917025.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:25.525Z,1516917025.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:25.741Z,1516917025.741 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:25.742Z,1516917025.742 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:50:25.744Z,1516917025.744 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:25.938Z,1516917025.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:26.145Z,1516917026.145 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:26.341Z,1516917026.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:26.355Z,1516917026.355 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:50:26.356Z,1516917026.356 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:26.724Z,1516917026.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:26.761Z,1516917026.761 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:27.124Z,1516917027.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:27.534Z,1516917027.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:27.557Z,1516917027.557 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:27.558Z,1516917027.558 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:50:27.560Z,1516917027.560 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:27.925Z,1516917027.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:27.961Z,1516917027.961 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:28.340Z,1516917028.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:28.350Z,1516917028.350 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:50:28.351Z,1516917028.351 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:28.734Z,1516917028.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:28.753Z,1516917028.753 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:29.130Z,1516917029.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:29.530Z,1516917029.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:29.549Z,1516917029.549 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:29.550Z,1516917029.550 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:50:29.552Z,1516917029.552 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:29.937Z,1516917029.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:29.953Z,1516917029.953 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:30.340Z,1516917030.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:30.736Z,1516917030.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:30.749Z,1516917030.749 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:30.750Z,1516917030.750 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:50:30.752Z,1516917030.752 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:31.143Z,1516917031.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:31.153Z,1516917031.153 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:31.354Z,1516917031.354 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:50:31.356Z,1516917031.356 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:31.517Z,1516917031.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:31.757Z,1516917031.757 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:31.922Z,1516917031.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:32.322Z,1516917032.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:32.553Z,1516917032.553 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:32.554Z,1516917032.554 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:50:32.556Z,1516917032.556 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:32.726Z,1516917032.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:32.957Z,1516917032.957 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:33.125Z,1516917033.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:33.524Z,1516917033.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:33.753Z,1516917033.753 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:33.754Z,1516917033.754 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:50:33.755Z,1516917033.755 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:33.919Z,1516917033.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:34.157Z,1516917034.157 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:34.324Z,1516917034.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:34.387Z,1516917034.387 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:50:34.389Z,1516917034.389 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:34.722Z,1516917034.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:34.793Z,1516917034.793 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:35.123Z,1516917035.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:35.523Z,1516917035.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:35.591Z,1516917035.591 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:35.592Z,1516917035.592 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:50:35.593Z,1516917035.593 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:35.931Z,1516917035.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:35.997Z,1516917035.997 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:50:36.322Z,1516917036.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:36.362Z,1516917036.362 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:50:36.364Z,1516917036.364 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:36.730Z,1516917036.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:37.122Z,1516917037.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:37.523Z,1516917037.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:37.562Z,1516917037.562 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:50:37.563Z,1516917037.563 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:37.927Z,1516917037.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:38.330Z,1516917038.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:38.722Z,1516917038.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:38.762Z,1516917038.762 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:50:38.763Z,1516917038.763 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:39.136Z,1516917039.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:39.367Z,1516917039.367 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:50:39.368Z,1516917039.368 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:39.530Z,1516917039.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:39.923Z,1516917039.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:40.323Z,1516917040.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:40.566Z,1516917040.566 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:50:40.567Z,1516917040.567 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:40.740Z,1516917040.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:41.123Z,1516917041.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:41.528Z,1516917041.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:41.766Z,1516917041.766 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:50:41.767Z,1516917041.767 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:41.923Z,1516917041.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:42.334Z,1516917042.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:42.372Z,1516917042.372 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:50:42.373Z,1516917042.373 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:42.731Z,1516917042.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:43.130Z,1516917043.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:43.525Z,1516917043.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:43.574Z,1516917043.574 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:50:43.575Z,1516917043.575 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:43.937Z,1516917043.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:44.337Z,1516917044.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:44.729Z,1516917044.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:44.774Z,1516917044.774 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:50:44.775Z,1516917044.775 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:45.138Z,1516917045.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:45.377Z,1516917045.377 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:50:45.378Z,1516917045.378 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:45.539Z,1516917045.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:45.929Z,1516917045.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:46.322Z,1516917046.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:46.578Z,1516917046.578 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:50:46.579Z,1516917046.579 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:46.726Z,1516917046.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:47.132Z,1516917047.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:47.557Z,1516917047.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:47.778Z,1516917047.778 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:50:47.779Z,1516917047.779 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:47.923Z,1516917047.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:48.320Z,1516917048.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:48.381Z,1516917048.381 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:50:48.382Z,1516917048.382 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:48.734Z,1516917048.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:49.127Z,1516917049.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:49.526Z,1516917049.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:49.582Z,1516917049.582 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:50:49.584Z,1516917049.584 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:49.928Z,1516917049.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:50.286Z,1516917050.286 [NAL9602](INFO): Powering up NAL9602
2018-01-25T21:50:50.347Z,1516917050.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:50.727Z,1516917050.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:50.783Z,1516917050.783 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:50:50.784Z,1516917050.784 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:51.128Z,1516917051.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:51.386Z,1516917051.386 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:50:51.387Z,1516917051.387 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:51.535Z,1516917051.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:51.930Z,1516917051.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:52.338Z,1516917052.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:52.586Z,1516917052.586 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:50:52.587Z,1516917052.587 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:52.740Z,1516917052.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:53.131Z,1516917053.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:53.530Z,1516917053.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:53.786Z,1516917053.786 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:50:53.787Z,1516917053.787 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:53.929Z,1516917053.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:54.338Z,1516917054.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:54.390Z,1516917054.390 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:50:54.391Z,1516917054.391 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:54.728Z,1516917054.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:55.138Z,1516917055.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:55.529Z,1516917055.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:55.590Z,1516917055.590 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:50:55.591Z,1516917055.591 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:55.936Z,1516917055.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:56.347Z,1516917056.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:56.732Z,1516917056.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:56.790Z,1516917056.790 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:50:56.791Z,1516917056.791 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:57.143Z,1516917057.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:57.395Z,1516917057.395 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:50:57.396Z,1516917057.396 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:57.543Z,1516917057.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:57.923Z,1516917057.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:50:58.594Z,1516917058.594 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:50:58.595Z,1516917058.595 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:50:59.794Z,1516917059.794 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:50:59.795Z,1516917059.795 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:00.399Z,1516917060.399 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:51:00.401Z,1516917060.401 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:01.196Z,1516917061.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:01.346Z,1516917061.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:01.602Z,1516917061.602 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:51:01.603Z,1516917061.603 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:01.619Z,1516917061.619 [NAL9602](INFO): NAL9602 initialized
2018-01-25T21:51:01.678Z,1516917061.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:02.069Z,1516917062.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:02.467Z,1516917062.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:02.802Z,1516917062.802 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:51:02.804Z,1516917062.804 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:02.872Z,1516917062.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:03.276Z,1516917063.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:03.405Z,1516917063.405 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:51:03.406Z,1516917063.406 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:03.648Z,1516917063.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:04.049Z,1516917064.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:04.454Z,1516917064.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:04.607Z,1516917064.607 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:51:04.608Z,1516917064.608 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:04.849Z,1516917064.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:05.278Z,1516917065.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:05.679Z,1516917065.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:05.806Z,1516917065.806 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:51:05.807Z,1516917065.807 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:06.058Z,1516917066.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:06.408Z,1516917066.408 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:51:06.410Z,1516917066.410 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:06.459Z,1516917066.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:06.858Z,1516917066.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:07.257Z,1516917067.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:07.622Z,1516917067.622 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:51:07.623Z,1516917067.623 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:07.674Z,1516917067.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:08.070Z,1516917068.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:08.411Z,1516917068.411 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:51:08.416Z,1516917068.416 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:08.480Z,1516917068.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:08.870Z,1516917068.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:09.255Z,1516917069.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:09.626Z,1516917069.626 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:51:09.649Z,1516917069.649 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:09.668Z,1516917069.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:10.057Z,1516917070.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:10.431Z,1516917070.431 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:51:10.433Z,1516917070.433 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:10.478Z,1516917070.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:10.866Z,1516917070.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:11.268Z,1516917071.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:11.638Z,1516917071.638 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:51:11.640Z,1516917071.640 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:11.672Z,1516917071.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:12.076Z,1516917072.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:12.423Z,1516917072.423 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:51:12.425Z,1516917072.425 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:12.458Z,1516917072.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:12.858Z,1516917072.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:13.257Z,1516917073.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:13.626Z,1516917073.626 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:51:13.627Z,1516917073.627 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:13.660Z,1516917073.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:14.068Z,1516917074.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:14.471Z,1516917074.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:14.830Z,1516917074.830 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:51:14.831Z,1516917074.831 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:14.868Z,1516917074.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:15.265Z,1516917075.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:15.422Z,1516917075.422 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:51:15.424Z,1516917075.424 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:15.657Z,1516917075.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:16.059Z,1516917076.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:16.464Z,1516917076.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:16.622Z,1516917076.622 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:51:16.623Z,1516917076.623 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:16.878Z,1516917076.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:17.271Z,1516917077.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:17.678Z,1516917077.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:17.822Z,1516917077.822 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:51:17.823Z,1516917077.823 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:18.067Z,1516917078.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:18.428Z,1516917078.428 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T21:51:18.435Z,1516917078.435 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:18.498Z,1516917078.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:18.871Z,1516917078.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:19.265Z,1516917079.265 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:19.265Z,1516917079.265 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 11
2018-01-25T21:51:19.265Z,1516917079.265 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-25T21:51:19.267Z,1516917079.267 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:19.267Z,1516917079.267 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11
2018-01-25T21:51:19.267Z,1516917079.267 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-25T21:51:19.269Z,1516917079.269 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:19.269Z,1516917079.269 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2018-01-25T21:51:19.269Z,1516917079.269 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-25T21:51:19.281Z,1516917079.281 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-25T21:51:19.281Z,1516917079.281 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-25T21:51:19.281Z,1516917079.281 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-25T21:51:19.634Z,1516917079.634 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:51:19.635Z,1516917079.635 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:19.691Z,1516917079.691 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-25T21:51:19.691Z,1516917079.691 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 11
2018-01-25T21:51:19.691Z,1516917079.691 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-25T21:51:19.691Z,1516917079.691 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11
2018-01-25T21:51:19.692Z,1516917079.692 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-25T21:51:19.692Z,1516917079.692 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2018-01-25T21:51:20.077Z,1516917080.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-25T21:51:20.077Z,1516917080.077 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T21:51:20.078Z,1516917080.078 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T21:51:20.078Z,1516917080.078 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-25T21:51:20.078Z,1516917080.078 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T21:51:20.079Z,1516917080.079 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T21:51:20.079Z,1516917080.079 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-25T21:51:20.079Z,1516917080.079 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T21:51:20.080Z,1516917080.080 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T21:51:20.475Z,1516917080.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-25T21:51:20.477Z,1516917080.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:20.834Z,1516917080.834 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:51:20.835Z,1516917080.835 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:20.882Z,1516917080.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-25T21:51:20.883Z,1516917080.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:21.254Z,1516917081.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-25T21:51:21.254Z,1516917081.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:21.432Z,1516917081.432 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:51:21.433Z,1516917081.433 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:21.654Z,1516917081.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-25T21:51:21.655Z,1516917081.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:22.052Z,1516917082.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-25T21:51:22.053Z,1516917082.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:22.483Z,1516917082.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-25T21:51:22.484Z,1516917082.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:22.634Z,1516917082.634 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:51:22.635Z,1516917082.635 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:22.877Z,1516917082.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-25T21:51:22.878Z,1516917082.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:23.288Z,1516917083.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-25T21:51:23.289Z,1516917083.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:23.679Z,1516917083.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-25T21:51:23.680Z,1516917083.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:23.834Z,1516917083.834 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:51:23.835Z,1516917083.835 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:24.059Z,1516917084.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-25T21:51:24.060Z,1516917084.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:24.437Z,1516917084.437 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:51:24.438Z,1516917084.438 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:24.487Z,1516917084.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-25T21:51:24.488Z,1516917084.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:24.857Z,1516917084.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-25T21:51:24.858Z,1516917084.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:25.266Z,1516917085.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-25T21:51:25.267Z,1516917085.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:25.638Z,1516917085.638 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:51:25.639Z,1516917085.639 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:25.680Z,1516917085.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-25T21:51:25.685Z,1516917085.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:26.066Z,1516917086.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-25T21:51:26.067Z,1516917086.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:26.474Z,1516917086.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-25T21:51:26.475Z,1516917086.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:26.838Z,1516917086.838 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:51:26.840Z,1516917086.840 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:26.878Z,1516917086.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-25T21:51:26.879Z,1516917086.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:27.261Z,1516917087.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-25T21:51:27.262Z,1516917087.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:27.441Z,1516917087.441 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:51:27.443Z,1516917087.443 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:27.660Z,1516917087.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-25T21:51:27.661Z,1516917087.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:28.056Z,1516917088.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-25T21:51:28.057Z,1516917088.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:28.473Z,1516917088.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-25T21:51:28.474Z,1516917088.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:28.642Z,1516917088.642 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:51:28.643Z,1516917088.643 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:28.862Z,1516917088.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-25T21:51:28.863Z,1516917088.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:29.266Z,1516917089.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-25T21:51:29.267Z,1516917089.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:29.674Z,1516917089.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-25T21:51:29.674Z,1516917089.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:29.842Z,1516917089.842 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:51:29.843Z,1516917089.843 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:30.066Z,1516917090.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-25T21:51:30.066Z,1516917090.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:30.449Z,1516917090.449 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:51:30.450Z,1516917090.450 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:30.475Z,1516917090.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-25T21:51:30.476Z,1516917090.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:30.869Z,1516917090.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-25T21:51:30.870Z,1516917090.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:31.264Z,1516917091.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-25T21:51:31.265Z,1516917091.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:31.650Z,1516917091.650 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:51:31.651Z,1516917091.651 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:31.670Z,1516917091.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-25T21:51:31.671Z,1516917091.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:32.073Z,1516917092.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-25T21:51:32.074Z,1516917092.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:32.477Z,1516917092.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-25T21:51:32.478Z,1516917092.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:32.850Z,1516917092.850 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:51:32.852Z,1516917092.852 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:32.878Z,1516917092.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-25T21:51:32.879Z,1516917092.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:33.254Z,1516917093.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-25T21:51:33.255Z,1516917093.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:33.450Z,1516917093.450 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:51:33.451Z,1516917093.451 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:33.658Z,1516917093.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-25T21:51:33.659Z,1516917093.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:34.063Z,1516917094.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-25T21:51:34.064Z,1516917094.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:34.487Z,1516917094.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-25T21:51:34.488Z,1516917094.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:34.650Z,1516917094.650 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:51:34.651Z,1516917094.651 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:34.887Z,1516917094.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-25T21:51:34.888Z,1516917094.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:35.259Z,1516917095.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-25T21:51:35.260Z,1516917095.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:35.661Z,1516917095.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-25T21:51:35.662Z,1516917095.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:35.850Z,1516917095.850 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:51:35.851Z,1516917095.851 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:36.055Z,1516917096.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-25T21:51:36.057Z,1516917096.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:36.460Z,1516917096.460 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:51:36.462Z,1516917096.462 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:36.479Z,1516917096.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-25T21:51:36.480Z,1516917096.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:36.857Z,1516917096.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-25T21:51:36.858Z,1516917096.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:37.269Z,1516917097.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-25T21:51:37.270Z,1516917097.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:37.662Z,1516917097.662 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:51:37.663Z,1516917097.663 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:37.670Z,1516917097.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-25T21:51:37.671Z,1516917097.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:38.070Z,1516917098.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-25T21:51:38.071Z,1516917098.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:38.464Z,1516917098.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-25T21:51:38.467Z,1516917098.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:38.856Z,1516917098.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-25T21:51:38.857Z,1516917098.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:38.862Z,1516917098.862 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:51:38.864Z,1516917098.864 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:39.267Z,1516917099.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:39.460Z,1516917099.460 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:51:39.461Z,1516917099.461 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:39.668Z,1516917099.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:40.067Z,1516917100.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:40.487Z,1516917100.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:40.662Z,1516917100.662 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:51:40.663Z,1516917100.663 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:40.871Z,1516917100.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:41.257Z,1516917101.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:41.662Z,1516917101.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:41.862Z,1516917101.862 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:51:41.863Z,1516917101.863 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:42.066Z,1516917102.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:42.477Z,1516917102.477 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:51:42.478Z,1516917102.478 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:42.486Z,1516917102.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:42.870Z,1516917102.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:43.265Z,1516917103.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:43.667Z,1516917103.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:43.678Z,1516917103.678 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:51:43.679Z,1516917103.679 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:44.076Z,1516917104.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:44.473Z,1516917104.473 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:51:44.474Z,1516917104.474 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:44.498Z,1516917104.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:44.867Z,1516917104.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:45.254Z,1516917105.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:45.654Z,1516917105.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:45.674Z,1516917105.674 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:51:45.675Z,1516917105.675 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:46.087Z,1516917106.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:46.489Z,1516917106.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:46.874Z,1516917106.874 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:51:46.875Z,1516917106.875 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:46.887Z,1516917106.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:47.257Z,1516917107.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:47.473Z,1516917107.473 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:51:47.474Z,1516917107.474 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:47.667Z,1516917107.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:48.070Z,1516917108.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:48.487Z,1516917108.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:48.674Z,1516917108.674 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:51:48.675Z,1516917108.675 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:48.878Z,1516917108.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:49.264Z,1516917109.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:49.656Z,1516917109.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:49.874Z,1516917109.874 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:51:49.875Z,1516917109.875 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:50.065Z,1516917110.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:50.477Z,1516917110.477 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:51:50.478Z,1516917110.478 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:50.513Z,1516917110.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:50.869Z,1516917110.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:51.267Z,1516917111.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:51.664Z,1516917111.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:51.678Z,1516917111.678 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:51:51.679Z,1516917111.679 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:52.066Z,1516917112.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:52.503Z,1516917112.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:52.874Z,1516917112.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:52.878Z,1516917112.878 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:51:52.879Z,1516917112.879 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:53.271Z,1516917113.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:53.481Z,1516917113.481 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:51:53.482Z,1516917113.482 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:53.671Z,1516917113.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:54.081Z,1516917114.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:54.492Z,1516917114.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:54.682Z,1516917114.682 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:51:54.683Z,1516917114.683 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:54.880Z,1516917114.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:55.272Z,1516917115.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:55.649Z,1516917115.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:55.882Z,1516917115.882 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:51:55.883Z,1516917115.883 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:56.071Z,1516917116.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:56.486Z,1516917116.486 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:51:56.487Z,1516917116.487 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:56.509Z,1516917116.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:56.883Z,1516917116.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:57.285Z,1516917117.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:57.655Z,1516917117.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:57.686Z,1516917117.686 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:51:57.687Z,1516917117.687 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:58.065Z,1516917118.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:51:58.886Z,1516917118.886 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:51:58.887Z,1516917118.887 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:51:59.491Z,1516917119.491 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:51:59.492Z,1516917119.492 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:00.690Z,1516917120.690 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:52:00.691Z,1516917120.691 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:01.345Z,1516917121.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:01.498Z,1516917121.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:01.807Z,1516917121.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:01.890Z,1516917121.890 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:52:01.891Z,1516917121.891 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:02.206Z,1516917122.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:02.495Z,1516917122.495 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:52:02.496Z,1516917122.496 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:02.610Z,1516917122.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:03.007Z,1516917123.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:03.422Z,1516917123.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:03.698Z,1516917123.698 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:52:03.699Z,1516917123.699 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:03.816Z,1516917123.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:04.218Z,1516917124.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:04.610Z,1516917124.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:04.898Z,1516917124.898 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:52:04.899Z,1516917124.899 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:05.013Z,1516917125.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:05.410Z,1516917125.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:05.500Z,1516917125.500 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:52:05.501Z,1516917125.501 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:05.813Z,1516917125.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:06.215Z,1516917126.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:06.618Z,1516917126.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:06.702Z,1516917126.702 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:52:06.703Z,1516917126.703 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:07.024Z,1516917127.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:07.402Z,1516917127.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:07.796Z,1516917127.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:07.902Z,1516917127.902 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:52:07.903Z,1516917127.903 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:08.202Z,1516917128.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:08.504Z,1516917128.504 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:52:08.506Z,1516917128.506 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:08.625Z,1516917128.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:09.029Z,1516917129.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:09.407Z,1516917129.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:09.706Z,1516917129.706 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:52:09.707Z,1516917129.707 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:09.826Z,1516917129.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:10.223Z,1516917130.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:10.629Z,1516917130.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:10.906Z,1516917130.906 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:52:10.907Z,1516917130.907 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:11.025Z,1516917131.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:11.402Z,1516917131.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:11.509Z,1516917131.509 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:52:11.510Z,1516917131.510 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:11.835Z,1516917131.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:12.232Z,1516917132.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:12.634Z,1516917132.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:12.710Z,1516917132.710 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:52:12.711Z,1516917132.711 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:13.011Z,1516917133.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:13.410Z,1516917133.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:13.800Z,1516917133.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:13.910Z,1516917133.910 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:52:13.911Z,1516917133.911 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:14.210Z,1516917134.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:14.513Z,1516917134.513 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:52:14.515Z,1516917134.515 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:14.603Z,1516917134.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:15.012Z,1516917135.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:15.411Z,1516917135.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:15.714Z,1516917135.714 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:52:15.715Z,1516917135.715 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:15.839Z,1516917135.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:16.209Z,1516917136.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:16.608Z,1516917136.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:16.914Z,1516917136.914 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:52:16.915Z,1516917136.915 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:17.003Z,1516917137.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:17.406Z,1516917137.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:17.518Z,1516917137.518 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:52:17.520Z,1516917137.520 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:17.817Z,1516917137.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:18.215Z,1516917138.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:18.617Z,1516917138.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:18.718Z,1516917138.718 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:52:18.719Z,1516917138.719 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:19.026Z,1516917139.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:19.404Z,1516917139.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:19.804Z,1516917139.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:19.918Z,1516917139.918 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:52:19.919Z,1516917139.919 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:20.214Z,1516917140.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:20.523Z,1516917140.523 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:52:20.524Z,1516917140.524 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:20.605Z,1516917140.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:21.004Z,1516917141.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:21.414Z,1516917141.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:21.722Z,1516917141.722 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:52:21.723Z,1516917141.723 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:21.817Z,1516917141.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:22.214Z,1516917142.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:22.606Z,1516917142.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:22.922Z,1516917142.922 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:52:22.923Z,1516917142.923 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:23.005Z,1516917143.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:23.405Z,1516917143.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:23.528Z,1516917143.528 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:52:23.529Z,1516917143.529 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:23.819Z,1516917143.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:24.215Z,1516917144.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:24.617Z,1516917144.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:24.730Z,1516917144.730 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:52:24.731Z,1516917144.731 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:25.023Z,1516917145.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:25.404Z,1516917145.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:25.804Z,1516917145.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:25.930Z,1516917145.930 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:52:25.931Z,1516917145.931 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:26.214Z,1516917146.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:26.532Z,1516917146.532 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:52:26.533Z,1516917146.533 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:26.610Z,1516917146.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:27.004Z,1516917147.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:27.422Z,1516917147.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:27.734Z,1516917147.734 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:52:27.735Z,1516917147.735 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:27.818Z,1516917147.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:28.215Z,1516917148.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:28.607Z,1516917148.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:28.934Z,1516917148.934 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:52:28.935Z,1516917148.935 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:29.004Z,1516917149.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:29.405Z,1516917149.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:29.537Z,1516917149.537 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:52:29.538Z,1516917149.538 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:29.817Z,1516917149.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:30.214Z,1516917150.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:30.617Z,1516917150.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:30.738Z,1516917150.738 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:52:30.739Z,1516917150.739 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:31.020Z,1516917151.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:31.408Z,1516917151.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:31.815Z,1516917151.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:31.938Z,1516917151.938 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:52:31.939Z,1516917151.939 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:32.216Z,1516917152.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:32.541Z,1516917152.541 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:52:32.543Z,1516917152.543 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:32.611Z,1516917152.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:33.014Z,1516917153.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:33.424Z,1516917153.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:33.742Z,1516917153.742 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T21:52:33.743Z,1516917153.743 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:33.818Z,1516917153.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:34.216Z,1516917154.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:34.623Z,1516917154.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:34.942Z,1516917154.942 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:52:34.943Z,1516917154.943 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:35.017Z,1516917155.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:35.422Z,1516917155.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:35.546Z,1516917155.546 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:52:35.547Z,1516917155.547 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:35.821Z,1516917155.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:36.216Z,1516917156.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:36.619Z,1516917156.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:36.746Z,1516917156.746 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:52:36.747Z,1516917156.747 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:37.027Z,1516917157.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:37.418Z,1516917157.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:37.797Z,1516917157.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:37.946Z,1516917157.946 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:52:37.947Z,1516917157.947 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:38.202Z,1516917158.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:38.551Z,1516917158.551 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:52:38.552Z,1516917158.552 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:38.622Z,1516917158.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:39.026Z,1516917159.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:39.434Z,1516917159.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:39.750Z,1516917159.750 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:52:39.751Z,1516917159.751 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:39.828Z,1516917159.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:40.231Z,1516917160.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:40.603Z,1516917160.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:40.950Z,1516917160.950 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:52:40.951Z,1516917160.951 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:41.021Z,1516917161.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:41.404Z,1516917161.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:41.555Z,1516917161.555 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:52:41.557Z,1516917161.557 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:41.808Z,1516917161.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:42.208Z,1516917162.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:42.623Z,1516917162.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:42.758Z,1516917162.758 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:52:42.759Z,1516917162.759 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:43.022Z,1516917163.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:43.404Z,1516917163.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:43.804Z,1516917163.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:43.958Z,1516917163.958 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:52:43.959Z,1516917163.959 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:44.204Z,1516917164.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:44.560Z,1516917164.560 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:52:44.571Z,1516917164.571 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:44.614Z,1516917164.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:45.015Z,1516917165.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:45.418Z,1516917165.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:45.770Z,1516917165.770 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:52:45.771Z,1516917165.771 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:45.835Z,1516917165.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:46.215Z,1516917166.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:46.611Z,1516917166.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:46.973Z,1516917166.973 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:52:46.974Z,1516917166.974 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:47.016Z,1516917167.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:47.416Z,1516917167.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:47.565Z,1516917167.565 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:52:47.566Z,1516917167.566 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:47.818Z,1516917167.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:48.225Z,1516917168.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:48.622Z,1516917168.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:48.766Z,1516917168.766 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:52:48.767Z,1516917168.767 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:49.029Z,1516917169.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:49.410Z,1516917169.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:49.816Z,1516917169.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:49.966Z,1516917169.966 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:52:49.967Z,1516917169.967 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:50.221Z,1516917170.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:50.572Z,1516917170.572 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:52:50.573Z,1516917170.573 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:50.630Z,1516917170.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:51.022Z,1516917171.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:51.424Z,1516917171.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:51.774Z,1516917171.774 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:52:51.776Z,1516917171.776 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:51.835Z,1516917171.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:52.207Z,1516917172.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:52.633Z,1516917172.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:52.978Z,1516917172.978 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:52:52.979Z,1516917172.979 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:53.010Z,1516917173.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:53.406Z,1516917173.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:53.574Z,1516917173.574 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:52:53.575Z,1516917173.575 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:53.814Z,1516917173.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:54.219Z,1516917174.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:54.630Z,1516917174.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:54.774Z,1516917174.774 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:52:54.775Z,1516917174.775 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:55.023Z,1516917175.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:55.407Z,1516917175.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:55.805Z,1516917175.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:55.974Z,1516917175.974 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:52:55.975Z,1516917175.975 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:56.222Z,1516917176.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:56.579Z,1516917176.579 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:52:56.580Z,1516917176.580 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:56.647Z,1516917176.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:57.013Z,1516917177.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:57.425Z,1516917177.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:57.778Z,1516917177.778 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:52:57.780Z,1516917177.780 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:57.827Z,1516917177.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:58.223Z,1516917178.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:52:58.978Z,1516917178.978 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:52:58.979Z,1516917178.979 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:52:59.584Z,1516917179.584 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:52:59.586Z,1516917179.586 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:00.786Z,1516917180.786 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:00.787Z,1516917180.787 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:01.478Z,1516917181.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:01.618Z,1516917181.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:01.944Z,1516917181.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:01.986Z,1516917181.986 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:01.987Z,1516917181.987 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:02.358Z,1516917182.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:02.588Z,1516917182.588 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:02.589Z,1516917182.589 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:02.757Z,1516917182.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:03.144Z,1516917183.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:03.549Z,1516917183.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:03.790Z,1516917183.790 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:03.791Z,1516917183.791 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:03.941Z,1516917183.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:04.346Z,1516917184.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:04.755Z,1516917184.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:04.990Z,1516917184.990 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:04.991Z,1516917184.991 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:05.151Z,1516917185.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:05.546Z,1516917185.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:05.593Z,1516917185.593 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:05.594Z,1516917185.594 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:05.949Z,1516917185.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:06.348Z,1516917186.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:06.747Z,1516917186.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:06.794Z,1516917186.794 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:06.795Z,1516917186.795 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:07.150Z,1516917187.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:07.557Z,1516917187.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:07.943Z,1516917187.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:07.994Z,1516917187.994 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:07.995Z,1516917187.995 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:08.346Z,1516917188.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:08.597Z,1516917188.597 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:08.598Z,1516917188.598 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:08.737Z,1516917188.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:09.136Z,1516917189.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:09.536Z,1516917189.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:09.798Z,1516917189.798 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:09.799Z,1516917189.799 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:09.936Z,1516917189.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:10.351Z,1516917190.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:10.750Z,1516917190.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:10.998Z,1516917190.998 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:10.999Z,1516917190.999 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:11.150Z,1516917191.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:11.540Z,1516917191.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:11.602Z,1516917191.602 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:11.603Z,1516917191.603 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:11.936Z,1516917191.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:12.345Z,1516917192.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:12.737Z,1516917192.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:12.802Z,1516917192.802 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:12.804Z,1516917192.804 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:13.144Z,1516917193.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:13.547Z,1516917193.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:13.949Z,1516917193.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:14.002Z,1516917194.002 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:14.003Z,1516917194.003 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:14.354Z,1516917194.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:14.606Z,1516917194.606 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:14.608Z,1516917194.608 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:14.742Z,1516917194.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:15.143Z,1516917195.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:15.548Z,1516917195.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:15.806Z,1516917195.806 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:15.807Z,1516917195.807 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:15.947Z,1516917195.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:16.347Z,1516917196.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:16.751Z,1516917196.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:17.006Z,1516917197.006 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:17.007Z,1516917197.007 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:17.147Z,1516917197.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:17.550Z,1516917197.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:17.611Z,1516917197.611 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:17.612Z,1516917197.612 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:17.954Z,1516917197.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:18.329Z,1516917198.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:18.734Z,1516917198.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:18.814Z,1516917198.814 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:18.815Z,1516917198.815 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:19.138Z,1516917199.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:19.539Z,1516917199.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:19.967Z,1516917199.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:20.014Z,1516917200.014 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:20.015Z,1516917200.015 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:20.346Z,1516917200.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:20.615Z,1516917200.615 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:20.617Z,1516917200.617 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:20.734Z,1516917200.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:21.139Z,1516917201.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:21.536Z,1516917201.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:21.818Z,1516917201.818 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:21.819Z,1516917201.819 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:21.940Z,1516917201.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:22.346Z,1516917202.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:22.749Z,1516917202.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:23.018Z,1516917203.018 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:23.019Z,1516917203.019 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:23.145Z,1516917203.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:23.543Z,1516917203.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:23.621Z,1516917203.621 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:23.623Z,1516917203.623 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:23.952Z,1516917203.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:24.337Z,1516917204.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:24.737Z,1516917204.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:24.822Z,1516917204.822 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:24.823Z,1516917204.823 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:25.150Z,1516917205.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:25.546Z,1516917205.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:25.949Z,1516917205.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:26.023Z,1516917206.023 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:26.024Z,1516917206.024 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:26.358Z,1516917206.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:26.625Z,1516917206.625 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:26.626Z,1516917206.626 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:26.736Z,1516917206.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:27.140Z,1516917207.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:27.547Z,1516917207.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:27.826Z,1516917207.826 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:53:27.827Z,1516917207.827 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:27.941Z,1516917207.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:28.346Z,1516917208.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:28.760Z,1516917208.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:29.028Z,1516917209.028 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:29.029Z,1516917209.029 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:29.142Z,1516917209.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:29.543Z,1516917209.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:29.630Z,1516917209.630 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:29.631Z,1516917209.631 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:29.949Z,1516917209.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:30.347Z,1516917210.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:30.747Z,1516917210.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:30.831Z,1516917210.831 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:30.833Z,1516917210.833 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:31.149Z,1516917211.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:31.547Z,1516917211.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:31.957Z,1516917211.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:32.035Z,1516917212.035 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:32.036Z,1516917212.036 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:32.358Z,1516917212.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:32.636Z,1516917212.636 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:32.637Z,1516917212.637 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:32.734Z,1516917212.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:33.154Z,1516917213.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:33.534Z,1516917213.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:33.838Z,1516917213.838 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:33.839Z,1516917213.839 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:33.936Z,1516917213.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:34.363Z,1516917214.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:34.760Z,1516917214.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:35.038Z,1516917215.038 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:53:35.039Z,1516917215.039 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:35.140Z,1516917215.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:35.538Z,1516917215.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:35.639Z,1516917215.639 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:53:35.640Z,1516917215.640 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:35.962Z,1516917215.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:36.338Z,1516917216.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:36.737Z,1516917216.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:36.838Z,1516917216.838 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:36.839Z,1516917216.839 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:37.146Z,1516917217.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:37.546Z,1516917217.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:37.954Z,1516917217.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:38.038Z,1516917218.038 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:38.039Z,1516917218.039 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:38.357Z,1516917218.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:38.643Z,1516917218.643 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:38.645Z,1516917218.645 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:38.738Z,1516917218.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:39.139Z,1516917219.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:39.550Z,1516917219.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:39.846Z,1516917219.846 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:53:39.847Z,1516917219.847 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:39.949Z,1516917219.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:40.351Z,1516917220.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:40.754Z,1516917220.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:41.046Z,1516917221.046 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:41.047Z,1516917221.047 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:41.154Z,1516917221.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:41.551Z,1516917221.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:41.648Z,1516917221.648 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:41.649Z,1516917221.649 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:41.955Z,1516917221.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:42.334Z,1516917222.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:42.743Z,1516917222.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:42.851Z,1516917222.851 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:42.853Z,1516917222.853 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:43.147Z,1516917223.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:43.545Z,1516917223.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:43.955Z,1516917223.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:44.054Z,1516917224.054 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:44.055Z,1516917224.055 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:44.354Z,1516917224.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:44.652Z,1516917224.652 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:44.654Z,1516917224.654 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:44.737Z,1516917224.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:45.141Z,1516917225.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:45.549Z,1516917225.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:45.854Z,1516917225.854 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:45.855Z,1516917225.855 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:45.948Z,1516917225.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:46.354Z,1516917226.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:46.762Z,1516917226.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:47.054Z,1516917227.054 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:47.055Z,1516917227.055 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:47.148Z,1516917227.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:47.539Z,1516917227.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:47.657Z,1516917227.657 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:47.659Z,1516917227.659 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:47.946Z,1516917227.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:48.344Z,1516917228.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:48.745Z,1516917228.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:48.858Z,1516917228.858 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:48.859Z,1516917228.859 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:49.150Z,1516917229.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:49.557Z,1516917229.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:49.950Z,1516917229.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:50.058Z,1516917230.058 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:50.059Z,1516917230.059 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:50.355Z,1516917230.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:50.662Z,1516917230.662 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:50.663Z,1516917230.663 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:50.734Z,1516917230.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:51.130Z,1516917231.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:51.534Z,1516917231.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:51.862Z,1516917231.862 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:51.863Z,1516917231.863 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:51.958Z,1516917231.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:52.341Z,1516917232.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:52.750Z,1516917232.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:53.062Z,1516917233.062 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:53.063Z,1516917233.063 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:53.154Z,1516917233.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:53.539Z,1516917233.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:53.667Z,1516917233.667 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:53.668Z,1516917233.668 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:53.938Z,1516917233.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:54.335Z,1516917234.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:54.737Z,1516917234.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:54.867Z,1516917234.867 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:54.868Z,1516917234.868 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:55.138Z,1516917235.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:55.546Z,1516917235.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:55.954Z,1516917235.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:56.066Z,1516917236.066 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:56.067Z,1516917236.067 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:56.346Z,1516917236.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:56.671Z,1516917236.671 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:56.673Z,1516917236.673 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:56.758Z,1516917236.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:57.137Z,1516917237.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:57.547Z,1516917237.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:57.550Z,1516917237.550 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-25T21:53:57.550Z,1516917237.550 [Default:CheckIn:C.Wait] Stopped
2018-01-25T21:53:57.551Z,1516917237.551 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-25T21:53:57.551Z,1516917237.551 [Default:CheckIn:D] Running Loop=1
2018-01-25T21:53:57.874Z,1516917237.874 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:57.875Z,1516917237.875 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:57.950Z,1516917237.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:57.958Z,1516917237.958 [Default:CheckIn:D] Stopped
2018-01-25T21:53:57.958Z,1516917237.958 [Default:CheckIn:E] Running Loop=1
2018-01-25T21:53:58.352Z,1516917238.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:53:58.355Z,1516917238.355 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 31.651860 min 
2018-01-25T21:53:58.355Z,1516917238.355 [Default:CheckIn:E] Stopped
2018-01-25T21:53:58.356Z,1516917238.356 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-25T21:53:58.356Z,1516917238.356 [Default:CheckIn] Stopped
2018-01-25T21:53:58.356Z,1516917238.356 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-25T21:53:58.356Z,1516917238.356 [Default:CheckIn](INFO): Running loop #4
2018-01-25T21:53:58.356Z,1516917238.356 [Default:CheckIn] Running Loop=4
2018-01-25T21:53:58.356Z,1516917238.356 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-25T21:53:58.356Z,1516917238.356 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-25T21:53:59.074Z,1516917239.074 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:53:59.075Z,1516917239.075 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:53:59.676Z,1516917239.676 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:53:59.677Z,1516917239.677 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:00.880Z,1516917240.880 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:00.882Z,1516917240.882 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:01.591Z,1516917241.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:01.746Z,1516917241.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:02.053Z,1516917242.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:02.094Z,1516917242.094 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:02.095Z,1516917242.095 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:02.466Z,1516917242.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:02.680Z,1516917242.680 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:54:02.682Z,1516917242.682 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:02.857Z,1516917242.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:03.260Z,1516917243.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:03.685Z,1516917243.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:03.882Z,1516917243.882 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:54:03.883Z,1516917243.883 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:04.067Z,1516917244.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:04.459Z,1516917244.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:04.864Z,1516917244.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:05.082Z,1516917245.082 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:54:05.083Z,1516917245.083 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:05.265Z,1516917245.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:05.685Z,1516917245.685 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:54:05.687Z,1516917245.687 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:05.699Z,1516917245.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:06.070Z,1516917246.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:06.459Z,1516917246.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:06.859Z,1516917246.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:06.886Z,1516917246.886 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:06.887Z,1516917246.887 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:07.266Z,1516917247.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:07.689Z,1516917247.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:08.065Z,1516917248.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:08.086Z,1516917248.086 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:08.087Z,1516917248.087 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:08.464Z,1516917248.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:08.718Z,1516917248.718 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:08.719Z,1516917248.719 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:08.860Z,1516917248.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:09.265Z,1516917249.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:09.702Z,1516917249.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:09.918Z,1516917249.918 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:09.919Z,1516917249.919 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:10.079Z,1516917250.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:10.452Z,1516917250.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:10.693Z,1516917250.693 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:10.694Z,1516917250.694 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:10.847Z,1516917250.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:11.279Z,1516917251.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:11.697Z,1516917251.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:11.894Z,1516917251.894 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:11.895Z,1516917251.895 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:12.060Z,1516917252.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:12.458Z,1516917252.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:12.852Z,1516917252.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:13.094Z,1516917253.094 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:13.095Z,1516917253.095 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:13.263Z,1516917253.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:13.659Z,1516917253.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:13.697Z,1516917253.697 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:54:13.699Z,1516917253.699 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:14.062Z,1516917254.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:14.452Z,1516917254.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:14.853Z,1516917254.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:14.898Z,1516917254.898 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:54:14.899Z,1516917254.899 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:15.274Z,1516917255.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:15.670Z,1516917255.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:16.062Z,1516917256.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:16.098Z,1516917256.098 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:54:16.099Z,1516917256.099 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:16.467Z,1516917256.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:16.705Z,1516917256.705 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:16.706Z,1516917256.706 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:16.871Z,1516917256.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:17.264Z,1516917257.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:17.667Z,1516917257.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:17.906Z,1516917257.906 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:17.907Z,1516917257.907 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:18.078Z,1516917258.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:18.466Z,1516917258.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:18.850Z,1516917258.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:19.107Z,1516917259.107 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:19.109Z,1516917259.109 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:19.276Z,1516917259.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:19.675Z,1516917259.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:19.707Z,1516917259.707 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:19.708Z,1516917259.708 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:20.065Z,1516917260.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:20.462Z,1516917260.462 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:20.462Z,1516917260.462 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 12
2018-01-25T21:54:20.462Z,1516917260.462 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-25T21:54:20.464Z,1516917260.464 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:20.464Z,1516917260.464 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12
2018-01-25T21:54:20.464Z,1516917260.464 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-25T21:54:20.466Z,1516917260.466 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:20.466Z,1516917260.466 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2018-01-25T21:54:20.466Z,1516917260.466 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-25T21:54:20.477Z,1516917260.477 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-25T21:54:20.477Z,1516917260.477 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-25T21:54:20.478Z,1516917260.478 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-25T21:54:20.863Z,1516917260.863 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-25T21:54:20.863Z,1516917260.863 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 12
2018-01-25T21:54:20.863Z,1516917260.863 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-25T21:54:20.863Z,1516917260.863 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12
2018-01-25T21:54:20.864Z,1516917260.864 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-25T21:54:20.864Z,1516917260.864 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2018-01-25T21:54:20.910Z,1516917260.910 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:20.911Z,1516917260.911 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:21.266Z,1516917261.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-25T21:54:21.266Z,1516917261.266 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T21:54:21.267Z,1516917261.267 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T21:54:21.267Z,1516917261.267 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-25T21:54:21.267Z,1516917261.267 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T21:54:21.268Z,1516917261.268 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T21:54:21.268Z,1516917261.268 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-25T21:54:21.269Z,1516917261.269 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T21:54:21.269Z,1516917261.269 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T21:54:21.674Z,1516917261.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-25T21:54:21.674Z,1516917261.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:22.063Z,1516917262.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-25T21:54:22.064Z,1516917262.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:22.110Z,1516917262.110 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:22.111Z,1516917262.111 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:22.470Z,1516917262.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-25T21:54:22.471Z,1516917262.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:22.711Z,1516917262.711 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:22.714Z,1516917262.714 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:22.849Z,1516917262.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-25T21:54:22.850Z,1516917262.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:23.254Z,1516917263.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-25T21:54:23.255Z,1516917263.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:23.659Z,1516917263.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-25T21:54:23.660Z,1516917263.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:23.914Z,1516917263.914 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:23.915Z,1516917263.915 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:24.059Z,1516917264.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-25T21:54:24.060Z,1516917264.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:24.455Z,1516917264.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-25T21:54:24.456Z,1516917264.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:24.851Z,1516917264.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-25T21:54:24.852Z,1516917264.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:25.114Z,1516917265.114 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:25.115Z,1516917265.115 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:25.251Z,1516917265.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-25T21:54:25.252Z,1516917265.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:25.651Z,1516917265.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-25T21:54:25.657Z,1516917265.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:25.716Z,1516917265.716 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:25.717Z,1516917265.717 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:26.059Z,1516917266.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-25T21:54:26.060Z,1516917266.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:26.461Z,1516917266.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-25T21:54:26.462Z,1516917266.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:26.859Z,1516917266.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-25T21:54:26.860Z,1516917266.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:26.918Z,1516917266.918 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:26.919Z,1516917266.919 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:27.271Z,1516917267.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-25T21:54:27.272Z,1516917267.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:27.658Z,1516917267.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-25T21:54:27.659Z,1516917267.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:28.059Z,1516917268.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-25T21:54:28.059Z,1516917268.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:28.118Z,1516917268.118 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:28.119Z,1516917268.119 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:28.462Z,1516917268.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-25T21:54:28.463Z,1516917268.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:28.721Z,1516917268.721 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:28.722Z,1516917268.722 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:28.858Z,1516917268.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-25T21:54:28.859Z,1516917268.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:29.254Z,1516917269.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-25T21:54:29.255Z,1516917269.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:29.662Z,1516917269.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-25T21:54:29.663Z,1516917269.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:29.922Z,1516917269.922 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:29.923Z,1516917269.923 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:30.067Z,1516917270.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-25T21:54:30.068Z,1516917270.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:30.462Z,1516917270.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-25T21:54:30.463Z,1516917270.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:30.854Z,1516917270.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-25T21:54:30.855Z,1516917270.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:31.122Z,1516917271.122 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:31.123Z,1516917271.123 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:31.252Z,1516917271.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-25T21:54:31.253Z,1516917271.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:31.662Z,1516917271.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-25T21:54:31.663Z,1516917271.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:31.726Z,1516917271.726 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:31.727Z,1516917271.727 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:32.054Z,1516917272.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-25T21:54:32.055Z,1516917272.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:32.467Z,1516917272.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-25T21:54:32.468Z,1516917272.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:32.866Z,1516917272.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-25T21:54:32.867Z,1516917272.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:32.926Z,1516917272.926 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:32.927Z,1516917272.927 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:33.266Z,1516917273.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-25T21:54:33.267Z,1516917273.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:33.654Z,1516917273.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-25T21:54:33.655Z,1516917273.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:34.058Z,1516917274.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-25T21:54:34.059Z,1516917274.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:34.126Z,1516917274.126 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:34.127Z,1516917274.127 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:34.456Z,1516917274.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-25T21:54:34.457Z,1516917274.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:34.730Z,1516917274.730 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:34.731Z,1516917274.731 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:34.859Z,1516917274.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-25T21:54:34.860Z,1516917274.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:35.258Z,1516917275.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-25T21:54:35.259Z,1516917275.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:35.674Z,1516917275.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-25T21:54:35.675Z,1516917275.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:35.930Z,1516917275.930 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:35.931Z,1516917275.931 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:36.075Z,1516917276.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-25T21:54:36.076Z,1516917276.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:36.463Z,1516917276.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-25T21:54:36.464Z,1516917276.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:36.862Z,1516917276.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-25T21:54:36.863Z,1516917276.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:37.130Z,1516917277.130 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:37.131Z,1516917277.131 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:37.265Z,1516917277.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-25T21:54:37.266Z,1516917277.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:37.662Z,1516917277.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-25T21:54:37.663Z,1516917277.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:37.735Z,1516917277.735 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:37.736Z,1516917277.736 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:38.047Z,1516917278.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-25T21:54:38.048Z,1516917278.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:38.477Z,1516917278.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-25T21:54:38.478Z,1516917278.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:38.867Z,1516917278.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-25T21:54:38.868Z,1516917278.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:38.934Z,1516917278.934 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:38.935Z,1516917278.935 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:39.267Z,1516917279.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-25T21:54:39.268Z,1516917279.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:39.650Z,1516917279.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-25T21:54:39.650Z,1516917279.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:40.050Z,1516917280.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-25T21:54:40.051Z,1516917280.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:40.134Z,1516917280.134 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:40.135Z,1516917280.135 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:40.454Z,1516917280.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-25T21:54:40.455Z,1516917280.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:40.739Z,1516917280.739 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:40.741Z,1516917280.741 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:40.858Z,1516917280.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:41.252Z,1516917281.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:41.662Z,1516917281.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:41.942Z,1516917281.942 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:41.943Z,1516917281.943 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:42.070Z,1516917282.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:42.462Z,1516917282.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:42.856Z,1516917282.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:43.142Z,1516917283.142 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:43.143Z,1516917283.143 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:43.254Z,1516917283.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:43.654Z,1516917283.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:43.744Z,1516917283.744 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:43.745Z,1516917283.745 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:44.058Z,1516917284.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:44.464Z,1516917284.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:44.866Z,1516917284.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:44.946Z,1516917284.946 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:44.947Z,1516917284.947 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:45.262Z,1516917285.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:45.662Z,1516917285.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:46.062Z,1516917286.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:46.147Z,1516917286.147 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:46.149Z,1516917286.149 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:46.463Z,1516917286.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:46.749Z,1516917286.749 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010807 psu
2018-01-25T21:54:46.750Z,1516917286.750 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:46.855Z,1516917286.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:47.250Z,1516917287.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:47.655Z,1516917287.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:47.950Z,1516917287.950 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:47.951Z,1516917287.951 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:48.079Z,1516917288.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:48.459Z,1516917288.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:48.859Z,1516917288.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:49.150Z,1516917289.150 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:49.151Z,1516917289.151 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:49.251Z,1516917289.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:49.652Z,1516917289.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:49.754Z,1516917289.754 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:49.755Z,1516917289.755 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:50.060Z,1516917290.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:50.466Z,1516917290.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:50.866Z,1516917290.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:50.954Z,1516917290.954 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:50.955Z,1516917290.955 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:51.262Z,1516917291.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:51.652Z,1516917291.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:52.061Z,1516917292.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:52.154Z,1516917292.154 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:52.155Z,1516917292.155 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:52.464Z,1516917292.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:52.758Z,1516917292.758 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:52.759Z,1516917292.759 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:52.856Z,1516917292.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:53.255Z,1516917293.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:53.670Z,1516917293.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:53.958Z,1516917293.958 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:53.959Z,1516917293.959 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:54.074Z,1516917294.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:54.466Z,1516917294.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:54.862Z,1516917294.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:55.158Z,1516917295.158 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:55.159Z,1516917295.159 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:55.258Z,1516917295.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:55.654Z,1516917295.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:55.762Z,1516917295.762 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:55.764Z,1516917295.764 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:56.055Z,1516917296.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:56.464Z,1516917296.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:56.859Z,1516917296.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:56.962Z,1516917296.962 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:56.963Z,1516917296.963 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:57.287Z,1516917297.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:57.658Z,1516917297.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:58.062Z,1516917298.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:58.162Z,1516917298.162 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:58.163Z,1516917298.163 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:58.457Z,1516917298.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:58.767Z,1516917298.767 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:58.768Z,1516917298.768 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:54:58.861Z,1516917298.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:59.253Z,1516917299.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:54:59.966Z,1516917299.966 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:54:59.967Z,1516917299.967 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:01.166Z,1516917301.166 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:01.167Z,1516917301.167 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:01.772Z,1516917301.772 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:01.773Z,1516917301.773 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:02.552Z,1516917302.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:02.700Z,1516917302.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:02.974Z,1516917302.974 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:02.975Z,1516917302.975 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:03.046Z,1516917303.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:03.416Z,1516917303.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:03.818Z,1516917303.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:04.174Z,1516917304.174 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:04.175Z,1516917304.175 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:04.232Z,1516917304.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:04.623Z,1516917304.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:04.776Z,1516917304.776 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:04.778Z,1516917304.778 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:05.026Z,1516917305.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:05.426Z,1516917305.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:05.819Z,1516917305.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:05.978Z,1516917305.978 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:05.979Z,1516917305.979 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:06.215Z,1516917306.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:06.622Z,1516917306.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:07.018Z,1516917307.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:07.178Z,1516917307.178 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:07.179Z,1516917307.179 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:07.425Z,1516917307.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:07.784Z,1516917307.784 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:07.801Z,1516917307.801 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:07.842Z,1516917307.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:08.227Z,1516917308.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:08.622Z,1516917308.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:09.002Z,1516917309.002 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:09.003Z,1516917309.003 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:09.025Z,1516917309.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:09.411Z,1516917309.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:09.785Z,1516917309.785 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:09.787Z,1516917309.787 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:09.829Z,1516917309.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:10.218Z,1516917310.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:10.623Z,1516917310.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:10.986Z,1516917310.986 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:10.987Z,1516917310.987 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:11.020Z,1516917311.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:11.426Z,1516917311.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:11.826Z,1516917311.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:12.186Z,1516917312.186 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:12.187Z,1516917312.187 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:12.229Z,1516917312.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:12.615Z,1516917312.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:12.817Z,1516917312.817 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:12.818Z,1516917312.818 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:13.027Z,1516917313.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:13.423Z,1516917313.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:13.834Z,1516917313.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:14.018Z,1516917314.018 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:14.019Z,1516917314.019 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:14.237Z,1516917314.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:14.613Z,1516917314.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:14.792Z,1516917314.792 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:55:14.793Z,1516917314.793 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:15.016Z,1516917315.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:15.420Z,1516917315.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:15.838Z,1516917315.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:15.994Z,1516917315.994 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:15.995Z,1516917315.995 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:16.216Z,1516917316.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:16.634Z,1516917316.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:17.026Z,1516917317.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:17.194Z,1516917317.194 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:17.195Z,1516917317.195 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:17.427Z,1516917317.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:17.797Z,1516917317.797 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:17.798Z,1516917317.798 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:17.845Z,1516917317.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:18.217Z,1516917318.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:18.626Z,1516917318.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:18.998Z,1516917318.998 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:18.999Z,1516917318.999 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:19.008Z,1516917319.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:19.416Z,1516917319.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:19.846Z,1516917319.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:20.198Z,1516917320.198 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:20.199Z,1516917320.199 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:20.250Z,1516917320.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:20.621Z,1516917320.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:20.801Z,1516917320.801 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:20.803Z,1516917320.803 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:21.016Z,1516917321.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:21.465Z,1516917321.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:21.842Z,1516917321.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:22.002Z,1516917322.002 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:22.003Z,1516917322.003 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:22.218Z,1516917322.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:22.634Z,1516917322.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:23.027Z,1516917323.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:23.202Z,1516917323.202 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:23.203Z,1516917323.203 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:23.427Z,1516917323.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:23.808Z,1516917323.808 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:23.809Z,1516917323.809 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:23.862Z,1516917323.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:24.224Z,1516917324.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:24.623Z,1516917324.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:25.010Z,1516917325.010 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:25.011Z,1516917325.011 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:25.030Z,1516917325.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:25.426Z,1516917325.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:25.836Z,1516917325.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:26.210Z,1516917326.210 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:26.211Z,1516917326.211 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:26.238Z,1516917326.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:26.606Z,1516917326.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:26.810Z,1516917326.810 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:26.811Z,1516917326.811 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:27.015Z,1516917327.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:27.441Z,1516917327.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:27.843Z,1516917327.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:28.010Z,1516917328.010 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:28.011Z,1516917328.011 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:28.219Z,1516917328.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:28.610Z,1516917328.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:29.012Z,1516917329.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:29.210Z,1516917329.210 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:29.211Z,1516917329.211 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:29.419Z,1516917329.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:29.829Z,1516917329.829 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:29.831Z,1516917329.831 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:29.854Z,1516917329.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:30.218Z,1516917330.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:30.621Z,1516917330.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:31.012Z,1516917331.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:31.030Z,1516917331.030 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:31.031Z,1516917331.031 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:31.430Z,1516917331.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:31.850Z,1516917331.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:32.228Z,1516917332.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:32.230Z,1516917332.230 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:32.231Z,1516917332.231 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:32.618Z,1516917332.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:32.819Z,1516917332.819 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:55:32.821Z,1516917332.821 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:33.025Z,1516917333.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:33.435Z,1516917333.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:33.857Z,1516917333.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:34.022Z,1516917334.022 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:34.023Z,1516917334.023 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:34.231Z,1516917334.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:34.618Z,1516917334.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:35.027Z,1516917335.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:35.222Z,1516917335.222 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:35.223Z,1516917335.223 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:35.428Z,1516917335.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:35.828Z,1516917335.828 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:35.829Z,1516917335.829 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:35.866Z,1516917335.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:36.241Z,1516917336.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:36.643Z,1516917336.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:37.011Z,1516917337.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:37.030Z,1516917337.030 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:37.031Z,1516917337.031 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:37.422Z,1516917337.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:37.851Z,1516917337.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:38.224Z,1516917338.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:38.230Z,1516917338.230 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:38.231Z,1516917338.231 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:38.626Z,1516917338.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:38.829Z,1516917338.829 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:38.830Z,1516917338.830 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:39.034Z,1516917339.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:39.432Z,1516917339.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:39.845Z,1516917339.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:40.030Z,1516917340.030 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:40.031Z,1516917340.031 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:40.231Z,1516917340.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:40.614Z,1516917340.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:41.014Z,1516917341.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:41.230Z,1516917341.230 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:41.231Z,1516917341.231 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:41.419Z,1516917341.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:41.837Z,1516917341.837 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:41.838Z,1516917341.838 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:41.847Z,1516917341.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:42.224Z,1516917342.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:42.610Z,1516917342.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:43.018Z,1516917343.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:43.038Z,1516917343.038 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:43.039Z,1516917343.039 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:43.416Z,1516917343.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:43.845Z,1516917343.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:44.226Z,1516917344.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:44.246Z,1516917344.246 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:44.247Z,1516917344.247 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:44.622Z,1516917344.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:44.838Z,1516917344.838 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:44.839Z,1516917344.839 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:45.015Z,1516917345.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:45.422Z,1516917345.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:45.855Z,1516917345.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:46.038Z,1516917346.038 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:55:46.039Z,1516917346.039 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:46.225Z,1516917346.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:46.622Z,1516917346.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:47.013Z,1516917347.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:47.238Z,1516917347.238 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:47.239Z,1516917347.239 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:47.425Z,1516917347.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:47.844Z,1516917347.844 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:47.853Z,1516917347.853 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:47.884Z,1516917347.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:48.230Z,1516917348.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:48.613Z,1516917348.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:49.022Z,1516917349.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:49.054Z,1516917349.054 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:49.055Z,1516917349.055 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:49.423Z,1516917349.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:49.846Z,1516917349.846 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:49.847Z,1516917349.847 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:49.856Z,1516917349.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:50.230Z,1516917350.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:50.618Z,1516917350.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:51.022Z,1516917351.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:51.046Z,1516917351.046 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:55:51.047Z,1516917351.047 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:51.432Z,1516917351.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:51.857Z,1516917351.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:52.232Z,1516917352.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:52.246Z,1516917352.246 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:52.247Z,1516917352.247 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:52.631Z,1516917352.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:52.850Z,1516917352.850 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:52.852Z,1516917352.852 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:53.021Z,1516917353.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:53.427Z,1516917353.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:53.855Z,1516917353.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:54.050Z,1516917354.050 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:54.051Z,1516917354.051 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:54.239Z,1516917354.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:54.610Z,1516917354.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:55.020Z,1516917355.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:55.250Z,1516917355.250 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:55.251Z,1516917355.251 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:55.423Z,1516917355.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:55.819Z,1516917355.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:55.855Z,1516917355.855 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:55.857Z,1516917355.857 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:56.225Z,1516917356.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:56.612Z,1516917356.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:57.012Z,1516917357.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:57.058Z,1516917357.058 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:57.059Z,1516917357.059 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:57.422Z,1516917357.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:57.844Z,1516917357.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:58.227Z,1516917358.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:58.258Z,1516917358.258 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:58.259Z,1516917358.259 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:55:58.615Z,1516917358.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:55:58.859Z,1516917358.859 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:55:58.861Z,1516917358.861 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:00.062Z,1516917360.062 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:56:00.063Z,1516917360.063 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:01.262Z,1516917361.262 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:56:01.263Z,1516917361.263 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:01.864Z,1516917361.864 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:56:01.866Z,1516917361.866 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:01.873Z,1516917361.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:02.023Z,1516917362.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:02.366Z,1516917362.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:02.757Z,1516917362.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:03.066Z,1516917363.066 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:56:03.067Z,1516917363.067 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:03.150Z,1516917363.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:03.540Z,1516917363.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:03.938Z,1516917363.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:04.266Z,1516917364.266 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:56:04.267Z,1516917364.267 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:04.338Z,1516917364.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:04.750Z,1516917364.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:04.869Z,1516917364.869 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:56:04.870Z,1516917364.870 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:05.158Z,1516917365.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:05.542Z,1516917365.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:05.937Z,1516917365.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:06.070Z,1516917366.070 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:56:06.071Z,1516917366.071 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:06.342Z,1516917366.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:06.733Z,1516917366.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:07.136Z,1516917367.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:07.270Z,1516917367.270 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:56:07.271Z,1516917367.271 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:07.543Z,1516917367.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:07.873Z,1516917367.873 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:56:07.875Z,1516917367.875 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:07.961Z,1516917367.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:08.346Z,1516917368.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:08.741Z,1516917368.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:09.074Z,1516917369.074 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:56:09.075Z,1516917369.075 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:09.154Z,1516917369.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:09.543Z,1516917369.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:09.953Z,1516917369.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:10.276Z,1516917370.276 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:56:10.277Z,1516917370.277 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:10.358Z,1516917370.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:10.747Z,1516917370.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:10.878Z,1516917370.878 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:56:10.879Z,1516917370.879 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:11.162Z,1516917371.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:11.535Z,1516917371.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:11.934Z,1516917371.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:12.078Z,1516917372.078 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:56:12.079Z,1516917372.079 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:12.338Z,1516917372.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:12.740Z,1516917372.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:13.135Z,1516917373.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:13.278Z,1516917373.278 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:56:13.279Z,1516917373.279 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:13.546Z,1516917373.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:13.883Z,1516917373.883 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:56:13.884Z,1516917373.884 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:13.970Z,1516917373.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:14.344Z,1516917374.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:14.741Z,1516917374.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:15.082Z,1516917375.082 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:56:15.083Z,1516917375.083 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:15.162Z,1516917375.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:15.540Z,1516917375.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:15.950Z,1516917375.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:16.282Z,1516917376.282 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:56:16.283Z,1516917376.283 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:16.341Z,1516917376.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:16.754Z,1516917376.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:16.915Z,1516917376.915 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:56:16.917Z,1516917376.917 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:17.163Z,1516917377.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:17.552Z,1516917377.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:17.944Z,1516917377.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:18.118Z,1516917378.118 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:56:18.119Z,1516917378.119 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:18.346Z,1516917378.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:18.744Z,1516917378.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:18.890Z,1516917378.890 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:56:18.892Z,1516917378.892 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:19.145Z,1516917379.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:19.555Z,1516917379.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:19.951Z,1516917379.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:20.090Z,1516917380.090 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:56:20.091Z,1516917380.091 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:20.350Z,1516917380.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:20.745Z,1516917380.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:21.143Z,1516917381.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:21.290Z,1516917381.290 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:56:21.291Z,1516917381.291 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:21.545Z,1516917381.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:21.899Z,1516917381.899 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:56:21.901Z,1516917381.901 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:21.954Z,1516917381.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:22.326Z,1516917382.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:22.756Z,1516917382.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:23.102Z,1516917383.102 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:56:23.103Z,1516917383.103 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:23.162Z,1516917383.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:23.562Z,1516917383.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:23.935Z,1516917383.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:24.302Z,1516917384.302 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:56:24.303Z,1516917384.303 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:24.350Z,1516917384.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:24.736Z,1516917384.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:24.900Z,1516917384.900 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:56:24.901Z,1516917384.901 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:25.135Z,1516917385.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:25.542Z,1516917385.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:25.946Z,1516917385.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:26.102Z,1516917386.102 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:56:26.103Z,1516917386.103 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:26.354Z,1516917386.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:26.742Z,1516917386.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:27.132Z,1516917387.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:27.302Z,1516917387.302 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:56:27.303Z,1516917387.303 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:27.545Z,1516917387.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:27.905Z,1516917387.905 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:56:27.906Z,1516917387.906 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:27.957Z,1516917387.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:28.339Z,1516917388.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:28.745Z,1516917388.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:29.106Z,1516917389.106 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:56:29.107Z,1516917389.107 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:29.152Z,1516917389.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:29.544Z,1516917389.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:29.946Z,1516917389.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:30.306Z,1516917390.306 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:56:30.307Z,1516917390.307 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:30.364Z,1516917390.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:30.743Z,1516917390.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:30.909Z,1516917390.909 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:56:30.910Z,1516917390.910 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:31.143Z,1516917391.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:31.553Z,1516917391.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:31.951Z,1516917391.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:32.110Z,1516917392.110 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:56:32.111Z,1516917392.111 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:32.346Z,1516917392.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:32.744Z,1516917392.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:33.143Z,1516917393.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:33.310Z,1516917393.310 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:56:33.311Z,1516917393.311 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:33.543Z,1516917393.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:33.915Z,1516917393.915 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:56:33.916Z,1516917393.916 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:33.969Z,1516917393.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:34.343Z,1516917394.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:34.744Z,1516917394.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:35.120Z,1516917395.120 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:56:35.121Z,1516917395.121 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:35.162Z,1516917395.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:35.551Z,1516917395.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:35.917Z,1516917395.917 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:56:35.918Z,1516917395.918 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:35.966Z,1516917395.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:36.332Z,1516917396.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:36.738Z,1516917396.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:37.118Z,1516917397.118 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:56:37.120Z,1516917397.120 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:37.135Z,1516917397.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:37.542Z,1516917397.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:37.960Z,1516917397.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:38.318Z,1516917398.318 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:56:38.319Z,1516917398.319 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:38.338Z,1516917398.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:38.732Z,1516917398.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:38.922Z,1516917398.922 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:56:38.923Z,1516917398.923 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:39.132Z,1516917399.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:39.539Z,1516917399.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:39.968Z,1516917399.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:40.122Z,1516917400.122 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:56:40.123Z,1516917400.123 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:40.336Z,1516917400.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:40.736Z,1516917400.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:41.146Z,1516917401.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:41.322Z,1516917401.322 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:56:41.324Z,1516917401.324 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:41.536Z,1516917401.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:41.932Z,1516917401.932 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:56:41.933Z,1516917401.933 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:41.948Z,1516917401.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:42.338Z,1516917402.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:42.734Z,1516917402.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:43.134Z,1516917403.134 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:56:43.135Z,1516917403.135 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:43.154Z,1516917403.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:43.543Z,1516917403.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:43.966Z,1516917403.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:44.334Z,1516917404.334 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:56:44.335Z,1516917404.335 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:44.349Z,1516917404.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:44.747Z,1516917404.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:44.931Z,1516917404.931 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:56:44.932Z,1516917404.932 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:45.141Z,1516917405.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:45.542Z,1516917405.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:45.949Z,1516917405.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:46.130Z,1516917406.130 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:56:46.131Z,1516917406.131 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:46.345Z,1516917406.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:46.743Z,1516917406.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:47.154Z,1516917407.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:47.330Z,1516917407.330 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:56:47.331Z,1516917407.331 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:47.543Z,1516917407.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:47.936Z,1516917407.936 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:56:47.937Z,1516917407.937 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:47.951Z,1516917407.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:48.351Z,1516917408.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:48.750Z,1516917408.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:49.138Z,1516917409.138 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:56:49.139Z,1516917409.139 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:49.146Z,1516917409.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:49.558Z,1516917409.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:49.959Z,1516917409.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:50.338Z,1516917410.338 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:56:50.339Z,1516917410.339 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:50.347Z,1516917410.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:50.733Z,1516917410.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:50.940Z,1516917410.940 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:56:50.941Z,1516917410.941 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:51.142Z,1516917411.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:51.535Z,1516917411.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:51.964Z,1516917411.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:52.142Z,1516917412.142 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:56:52.143Z,1516917412.143 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:52.342Z,1516917412.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:52.732Z,1516917412.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:53.134Z,1516917413.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:53.342Z,1516917413.342 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:56:53.343Z,1516917413.343 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:53.542Z,1516917413.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:53.947Z,1516917413.947 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:56:53.949Z,1516917413.949 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:53.984Z,1516917413.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:54.346Z,1516917414.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:54.734Z,1516917414.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:55.134Z,1516917415.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:55.158Z,1516917415.158 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:56:55.159Z,1516917415.159 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:55.542Z,1516917415.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:55.948Z,1516917415.948 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:56:55.949Z,1516917415.949 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:55.971Z,1516917415.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:56.354Z,1516917416.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:56.745Z,1516917416.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:57.140Z,1516917417.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:57.150Z,1516917417.150 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:56:57.151Z,1516917417.151 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:57.545Z,1516917417.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:57.964Z,1516917417.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:58.350Z,1516917418.350 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:56:58.351Z,1516917418.351 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:56:58.361Z,1516917418.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:58.744Z,1516917418.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:56:58.981Z,1516917418.981 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:56:58.982Z,1516917418.982 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:00.182Z,1516917420.182 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:57:00.183Z,1516917420.183 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:00.956Z,1516917420.956 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:57:00.957Z,1516917420.957 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:01.975Z,1516917421.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:02.102Z,1516917422.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:02.158Z,1516917422.158 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:57:02.159Z,1516917422.159 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:02.489Z,1516917422.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:02.865Z,1516917422.865 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2018-01-25T21:57:02.890Z,1516917422.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:03.265Z,1516917423.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:03.358Z,1516917423.358 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:57:03.359Z,1516917423.359 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:03.679Z,1516917423.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:03.960Z,1516917423.960 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:57:03.961Z,1516917423.961 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:04.064Z,1516917424.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:04.467Z,1516917424.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:04.873Z,1516917424.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:05.162Z,1516917425.162 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:57:05.163Z,1516917425.163 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:05.292Z,1516917425.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:05.677Z,1516917425.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:06.059Z,1516917426.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:06.362Z,1516917426.362 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:57:06.363Z,1516917426.363 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:06.467Z,1516917426.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:06.859Z,1516917426.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:06.965Z,1516917426.965 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:57:06.966Z,1516917426.966 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:07.276Z,1516917427.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:07.674Z,1516917427.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:08.076Z,1516917428.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:08.166Z,1516917428.166 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:57:08.167Z,1516917428.167 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:08.497Z,1516917428.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:08.858Z,1516917428.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:09.257Z,1516917429.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:09.366Z,1516917429.366 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:57:09.367Z,1516917429.367 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:09.679Z,1516917429.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:09.969Z,1516917429.969 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:57:09.971Z,1516917429.971 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:10.063Z,1516917430.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:10.459Z,1516917430.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:10.878Z,1516917430.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:11.170Z,1516917431.170 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:57:11.171Z,1516917431.171 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:11.282Z,1516917431.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:11.703Z,1516917431.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:12.066Z,1516917432.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:12.370Z,1516917432.370 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:57:12.371Z,1516917432.371 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:12.464Z,1516917432.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:12.870Z,1516917432.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:12.974Z,1516917432.974 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:57:12.976Z,1516917432.976 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:13.267Z,1516917433.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:13.675Z,1516917433.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:14.079Z,1516917434.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:14.174Z,1516917434.174 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:57:14.175Z,1516917434.175 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:14.483Z,1516917434.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:14.866Z,1516917434.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:15.270Z,1516917435.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:15.374Z,1516917435.374 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:57:15.375Z,1516917435.375 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:15.665Z,1516917435.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:15.978Z,1516917435.978 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:57:15.980Z,1516917435.980 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:16.058Z,1516917436.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:16.449Z,1516917436.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:16.876Z,1516917436.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:17.178Z,1516917437.178 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:57:17.179Z,1516917437.179 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:17.284Z,1516917437.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:17.659Z,1516917437.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:18.062Z,1516917438.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:18.379Z,1516917438.379 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:57:18.381Z,1516917438.381 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:18.477Z,1516917438.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:18.866Z,1516917438.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:18.983Z,1516917438.983 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:57:18.985Z,1516917438.985 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:19.254Z,1516917439.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:19.666Z,1516917439.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:20.068Z,1516917440.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:20.188Z,1516917440.188 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:57:20.189Z,1516917440.189 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:20.471Z,1516917440.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:20.867Z,1516917440.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:21.257Z,1516917441.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:21.390Z,1516917441.390 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:57:21.391Z,1516917441.391 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:21.667Z,1516917441.667 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:21.667Z,1516917441.667 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 13
2018-01-25T21:57:21.667Z,1516917441.667 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-25T21:57:21.669Z,1516917441.669 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:21.669Z,1516917441.669 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13
2018-01-25T21:57:21.669Z,1516917441.669 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-25T21:57:21.671Z,1516917441.671 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:21.671Z,1516917441.671 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2018-01-25T21:57:21.671Z,1516917441.671 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-25T21:57:21.683Z,1516917441.683 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-25T21:57:21.683Z,1516917441.683 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-25T21:57:21.683Z,1516917441.683 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-25T21:57:21.988Z,1516917441.988 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:57:21.989Z,1516917441.989 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:22.097Z,1516917442.097 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-25T21:57:22.097Z,1516917442.097 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 13
2018-01-25T21:57:22.097Z,1516917442.097 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-25T21:57:22.098Z,1516917442.098 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13
2018-01-25T21:57:22.098Z,1516917442.098 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-25T21:57:22.098Z,1516917442.098 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2018-01-25T21:57:22.462Z,1516917442.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-25T21:57:22.463Z,1516917442.463 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T21:57:22.463Z,1516917442.463 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T21:57:22.463Z,1516917442.463 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-25T21:57:22.464Z,1516917442.464 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T21:57:22.464Z,1516917442.464 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T21:57:22.464Z,1516917442.464 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-25T21:57:22.465Z,1516917442.465 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T21:57:22.465Z,1516917442.465 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T21:57:22.867Z,1516917442.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-25T21:57:22.868Z,1516917442.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:23.190Z,1516917443.190 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:57:23.191Z,1516917443.191 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:23.274Z,1516917443.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-25T21:57:23.275Z,1516917443.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:23.667Z,1516917443.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-25T21:57:23.668Z,1516917443.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:24.066Z,1516917444.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-25T21:57:24.067Z,1516917444.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:24.390Z,1516917444.390 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:57:24.391Z,1516917444.391 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:24.454Z,1516917444.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-25T21:57:24.455Z,1516917444.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:24.862Z,1516917444.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-25T21:57:24.863Z,1516917444.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:24.992Z,1516917444.992 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:57:24.994Z,1516917444.994 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:25.262Z,1516917445.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-25T21:57:25.263Z,1516917445.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:25.659Z,1516917445.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-25T21:57:25.660Z,1516917445.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:26.063Z,1516917446.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-25T21:57:26.064Z,1516917446.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:26.194Z,1516917446.194 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:57:26.195Z,1516917446.195 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:26.463Z,1516917446.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-25T21:57:26.464Z,1516917446.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:26.865Z,1516917446.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-25T21:57:26.866Z,1516917446.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:27.258Z,1516917447.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-25T21:57:27.259Z,1516917447.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:27.394Z,1516917447.394 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:57:27.395Z,1516917447.395 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:27.660Z,1516917447.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-25T21:57:27.665Z,1516917447.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:27.997Z,1516917447.997 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:57:27.998Z,1516917447.998 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:28.082Z,1516917448.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-25T21:57:28.083Z,1516917448.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:28.462Z,1516917448.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-25T21:57:28.463Z,1516917448.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:28.875Z,1516917448.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-25T21:57:28.876Z,1516917448.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:29.198Z,1516917449.198 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:57:29.199Z,1516917449.199 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:29.294Z,1516917449.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-25T21:57:29.295Z,1516917449.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:29.676Z,1516917449.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-25T21:57:29.677Z,1516917449.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:30.060Z,1516917450.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-25T21:57:30.061Z,1516917450.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:30.398Z,1516917450.398 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:57:30.399Z,1516917450.399 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:30.481Z,1516917450.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-25T21:57:30.482Z,1516917450.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:30.878Z,1516917450.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-25T21:57:30.879Z,1516917450.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:31.002Z,1516917451.002 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:57:31.003Z,1516917451.003 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:31.260Z,1516917451.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-25T21:57:31.261Z,1516917451.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:31.667Z,1516917451.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-25T21:57:31.668Z,1516917451.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:32.063Z,1516917452.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-25T21:57:32.064Z,1516917452.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:32.202Z,1516917452.202 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:57:32.203Z,1516917452.203 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:32.467Z,1516917452.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-25T21:57:32.468Z,1516917452.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:32.859Z,1516917452.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-25T21:57:32.860Z,1516917452.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:33.265Z,1516917453.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-25T21:57:33.266Z,1516917453.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:33.402Z,1516917453.402 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:57:33.403Z,1516917453.403 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:33.665Z,1516917453.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-25T21:57:33.666Z,1516917453.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:34.006Z,1516917454.006 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:57:34.008Z,1516917454.008 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:34.078Z,1516917454.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-25T21:57:34.079Z,1516917454.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:34.462Z,1516917454.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-25T21:57:34.463Z,1516917454.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:34.866Z,1516917454.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-25T21:57:34.867Z,1516917454.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:35.206Z,1516917455.206 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:57:35.207Z,1516917455.207 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:35.290Z,1516917455.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-25T21:57:35.291Z,1516917455.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:35.676Z,1516917455.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-25T21:57:35.677Z,1516917455.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:36.060Z,1516917456.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-25T21:57:36.061Z,1516917456.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:36.406Z,1516917456.406 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:57:36.407Z,1516917456.407 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:36.479Z,1516917456.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-25T21:57:36.480Z,1516917456.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:36.867Z,1516917456.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-25T21:57:36.868Z,1516917456.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:37.011Z,1516917457.011 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:57:37.012Z,1516917457.012 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:37.266Z,1516917457.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-25T21:57:37.267Z,1516917457.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:37.676Z,1516917457.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-25T21:57:37.677Z,1516917457.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:38.070Z,1516917458.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-25T21:57:38.071Z,1516917458.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:38.214Z,1516917458.214 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:57:38.215Z,1516917458.215 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:38.471Z,1516917458.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-25T21:57:38.472Z,1516917458.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:38.868Z,1516917458.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-25T21:57:38.869Z,1516917458.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:39.266Z,1516917459.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-25T21:57:39.267Z,1516917459.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:39.414Z,1516917459.414 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:57:39.415Z,1516917459.415 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:39.663Z,1516917459.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-25T21:57:39.669Z,1516917459.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:40.027Z,1516917460.027 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:57:40.034Z,1516917460.034 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:40.098Z,1516917460.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-25T21:57:40.099Z,1516917460.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:40.458Z,1516917460.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-25T21:57:40.459Z,1516917460.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:40.863Z,1516917460.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-25T21:57:40.864Z,1516917460.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:41.234Z,1516917461.234 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:57:41.235Z,1516917461.235 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:41.267Z,1516917461.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-25T21:57:41.268Z,1516917461.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:41.670Z,1516917461.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:42.090Z,1516917462.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:42.434Z,1516917462.434 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:57:42.435Z,1516917462.435 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:42.473Z,1516917462.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:42.867Z,1516917462.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:43.020Z,1516917463.020 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:57:43.022Z,1516917463.022 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:43.263Z,1516917463.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:43.671Z,1516917463.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:44.078Z,1516917464.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:44.222Z,1516917464.222 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:57:44.223Z,1516917464.223 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:44.474Z,1516917464.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:44.865Z,1516917464.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:45.258Z,1516917465.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:45.422Z,1516917465.422 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:57:45.423Z,1516917465.423 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:45.661Z,1516917465.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:46.025Z,1516917466.025 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:57:46.026Z,1516917466.026 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:46.098Z,1516917466.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:46.468Z,1516917466.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:46.875Z,1516917466.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:47.226Z,1516917467.226 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:57:47.227Z,1516917467.227 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:47.302Z,1516917467.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:47.678Z,1516917467.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:48.070Z,1516917468.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:48.429Z,1516917468.429 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:57:48.430Z,1516917468.430 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:48.480Z,1516917468.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:48.855Z,1516917468.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:49.030Z,1516917469.030 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:57:49.031Z,1516917469.031 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:49.259Z,1516917469.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:49.664Z,1516917469.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:50.086Z,1516917470.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:50.230Z,1516917470.230 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:57:50.231Z,1516917470.231 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:50.467Z,1516917470.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:50.862Z,1516917470.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:51.267Z,1516917471.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:51.430Z,1516917471.430 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:57:51.431Z,1516917471.431 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:51.662Z,1516917471.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:52.034Z,1516917472.034 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:57:52.036Z,1516917472.036 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:52.069Z,1516917472.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:52.466Z,1516917472.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:52.871Z,1516917472.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:53.247Z,1516917473.247 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:57:53.251Z,1516917473.251 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:53.294Z,1516917473.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:53.678Z,1516917473.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:54.041Z,1516917474.041 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:57:54.042Z,1516917474.042 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:54.092Z,1516917474.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:54.472Z,1516917474.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:54.867Z,1516917474.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:55.242Z,1516917475.242 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:57:55.243Z,1516917475.243 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:55.267Z,1516917475.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:55.682Z,1516917475.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:56.080Z,1516917476.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:56.442Z,1516917476.442 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:57:56.443Z,1516917476.443 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:56.498Z,1516917476.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:56.857Z,1516917476.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:57.042Z,1516917477.042 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:57:57.043Z,1516917477.043 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:57.262Z,1516917477.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:57.664Z,1516917477.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:58.070Z,1516917478.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:58.242Z,1516917478.242 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:57:58.243Z,1516917478.243 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:57:58.460Z,1516917478.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:58.877Z,1516917478.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:57:59.442Z,1516917479.442 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:57:59.443Z,1516917479.443 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:00.047Z,1516917480.047 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:58:00.048Z,1516917480.048 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:01.246Z,1516917481.246 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:58:01.247Z,1516917481.247 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:02.161Z,1516917482.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:02.267Z,1516917482.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:02.446Z,1516917482.446 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:58:02.447Z,1516917482.447 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:02.623Z,1516917482.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:03.034Z,1516917483.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:03.079Z,1516917483.079 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:58:03.081Z,1516917483.081 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:03.430Z,1516917483.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:03.830Z,1516917483.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:04.242Z,1516917484.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:04.282Z,1516917484.282 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:58:04.283Z,1516917484.283 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:04.645Z,1516917484.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:05.049Z,1516917485.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:05.055Z,1516917485.055 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:58:05.056Z,1516917485.056 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:05.434Z,1516917485.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:05.830Z,1516917485.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:06.234Z,1516917486.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:06.254Z,1516917486.254 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:58:06.255Z,1516917486.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:06.648Z,1516917486.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:07.069Z,1516917487.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:07.439Z,1516917487.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:07.454Z,1516917487.454 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:58:07.455Z,1516917487.455 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:07.826Z,1516917487.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:08.059Z,1516917488.059 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:58:08.060Z,1516917488.060 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:08.222Z,1516917488.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:08.632Z,1516917488.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:09.064Z,1516917489.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:09.258Z,1516917489.258 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:58:09.259Z,1516917489.259 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:09.432Z,1516917489.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:09.823Z,1516917489.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:10.222Z,1516917490.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:10.458Z,1516917490.458 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:58:10.459Z,1516917490.459 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:10.631Z,1516917490.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:11.064Z,1516917491.064 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:58:11.065Z,1516917491.065 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:11.071Z,1516917491.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:11.442Z,1516917491.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:11.821Z,1516917491.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:12.221Z,1516917492.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:12.234Z,1516917492.234 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-25T21:58:12.266Z,1516917492.266 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:58:12.267Z,1516917492.267 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:12.639Z,1516917492.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:13.044Z,1516917493.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:13.433Z,1516917493.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:13.466Z,1516917493.466 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:58:13.467Z,1516917493.467 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:13.839Z,1516917493.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:14.069Z,1516917494.069 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:58:14.070Z,1516917494.070 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:14.224Z,1516917494.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:14.646Z,1516917494.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:15.042Z,1516917495.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:15.270Z,1516917495.270 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:58:15.271Z,1516917495.271 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:15.446Z,1516917495.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:15.838Z,1516917495.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:16.248Z,1516917496.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:16.470Z,1516917496.470 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:58:16.471Z,1516917496.471 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:16.627Z,1516917496.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:17.027Z,1516917497.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:17.073Z,1516917497.073 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:58:17.074Z,1516917497.074 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:17.434Z,1516917497.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:17.834Z,1516917497.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:18.224Z,1516917498.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:18.274Z,1516917498.274 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:58:18.275Z,1516917498.275 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:18.634Z,1516917498.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:19.050Z,1516917499.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:19.439Z,1516917499.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:19.474Z,1516917499.474 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:58:19.475Z,1516917499.475 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:19.836Z,1516917499.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:20.077Z,1516917500.077 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:58:20.079Z,1516917500.079 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:20.231Z,1516917500.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:20.644Z,1516917500.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:21.042Z,1516917501.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:21.278Z,1516917501.278 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:58:21.279Z,1516917501.279 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:21.437Z,1516917501.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:21.825Z,1516917501.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:22.235Z,1516917502.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:22.478Z,1516917502.478 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:58:22.479Z,1516917502.479 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:22.638Z,1516917502.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:23.050Z,1516917503.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:23.084Z,1516917503.084 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:58:23.085Z,1516917503.085 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:23.447Z,1516917503.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:23.832Z,1516917503.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:24.229Z,1516917504.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:24.286Z,1516917504.286 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:58:24.287Z,1516917504.287 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:24.628Z,1516917504.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:25.022Z,1516917505.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:25.426Z,1516917505.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:25.486Z,1516917505.486 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:58:25.487Z,1516917505.487 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:25.838Z,1516917505.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:26.087Z,1516917506.087 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:58:26.088Z,1516917506.088 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:26.235Z,1516917506.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:26.627Z,1516917506.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:27.026Z,1516917507.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:27.286Z,1516917507.286 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:58:27.287Z,1516917507.287 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:27.434Z,1516917507.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:27.826Z,1516917507.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:28.237Z,1516917508.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:28.486Z,1516917508.486 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:58:28.487Z,1516917508.487 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:28.629Z,1516917508.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:29.038Z,1516917509.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:29.092Z,1516917509.092 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:58:29.093Z,1516917509.093 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:29.434Z,1516917509.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:29.837Z,1516917509.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:30.232Z,1516917510.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:30.294Z,1516917510.294 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:58:30.295Z,1516917510.295 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:30.632Z,1516917510.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:31.029Z,1516917511.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:31.431Z,1516917511.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:31.494Z,1516917511.494 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:58:31.495Z,1516917511.495 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:31.833Z,1516917511.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:32.096Z,1516917512.096 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:58:32.098Z,1516917512.098 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:32.243Z,1516917512.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:32.633Z,1516917512.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:33.027Z,1516917513.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:33.303Z,1516917513.303 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:58:33.304Z,1516917513.304 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:33.446Z,1516917513.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:33.821Z,1516917513.821 [PNI_TCM](ERROR): CRC does not match. Expected:0x19748 got:0x49775
2018-01-25T21:58:33.846Z,1516917513.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:34.228Z,1516917514.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:34.502Z,1516917514.502 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:58:34.503Z,1516917514.503 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:34.625Z,1516917514.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:35.036Z,1516917515.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:35.101Z,1516917515.101 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:58:35.102Z,1516917515.102 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:35.449Z,1516917515.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:35.837Z,1516917515.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:36.234Z,1516917516.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:36.302Z,1516917516.302 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:58:36.303Z,1516917516.303 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:36.642Z,1516917516.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:37.036Z,1516917517.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:37.420Z,1516917517.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:37.502Z,1516917517.502 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:58:37.503Z,1516917517.503 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:37.845Z,1516917517.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:38.105Z,1516917518.105 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:58:38.106Z,1516917518.106 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:38.242Z,1516917518.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:38.624Z,1516917518.624 [PNI_TCM](ERROR): CRC does not match. Expected:0x58310 got:0x16947
2018-01-25T21:58:38.647Z,1516917518.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:39.024Z,1516917519.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:39.306Z,1516917519.306 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:58:39.307Z,1516917519.307 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:39.430Z,1516917519.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:39.849Z,1516917519.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:40.245Z,1516917520.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:40.506Z,1516917520.506 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:58:40.507Z,1516917520.507 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:40.630Z,1516917520.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:41.045Z,1516917521.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:41.110Z,1516917521.110 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:58:41.111Z,1516917521.111 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:41.446Z,1516917521.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:41.830Z,1516917521.830 [PNI_TCM](ERROR): CRC does not match. Expected:0x27379 got:0x7195
2018-01-25T21:58:41.862Z,1516917521.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:42.242Z,1516917522.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:42.310Z,1516917522.310 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:58:42.311Z,1516917522.311 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:42.632Z,1516917522.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:43.041Z,1516917523.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:43.436Z,1516917523.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:43.511Z,1516917523.511 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:58:43.512Z,1516917523.512 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:43.850Z,1516917523.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:44.114Z,1516917524.114 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:58:44.116Z,1516917524.116 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:44.246Z,1516917524.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:44.643Z,1516917524.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:45.039Z,1516917525.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:45.314Z,1516917525.314 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:58:45.315Z,1516917525.315 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:45.442Z,1516917525.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:45.821Z,1516917525.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:46.251Z,1516917526.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:46.514Z,1516917526.514 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:58:46.515Z,1516917526.515 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:46.620Z,1516917526.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:47.032Z,1516917527.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:47.119Z,1516917527.119 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:58:47.120Z,1516917527.120 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:47.433Z,1516917527.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:47.853Z,1516917527.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:48.219Z,1516917528.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:48.322Z,1516917528.322 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:58:48.323Z,1516917528.323 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:48.631Z,1516917528.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:49.030Z,1516917529.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:49.435Z,1516917529.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:49.522Z,1516917529.522 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:58:49.523Z,1516917529.523 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:49.841Z,1516917529.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:50.124Z,1516917530.124 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:58:50.125Z,1516917530.125 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:50.243Z,1516917530.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:50.637Z,1516917530.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:51.030Z,1516917531.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:51.326Z,1516917531.326 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:58:51.327Z,1516917531.327 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:51.425Z,1516917531.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:51.822Z,1516917531.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:52.235Z,1516917532.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:52.526Z,1516917532.526 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:58:52.527Z,1516917532.527 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:52.629Z,1516917532.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:53.029Z,1516917533.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:53.128Z,1516917533.128 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:58:53.130Z,1516917533.130 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:53.440Z,1516917533.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:53.839Z,1516917533.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:54.238Z,1516917534.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:54.331Z,1516917534.331 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:58:54.332Z,1516917534.332 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:54.630Z,1516917534.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:55.021Z,1516917535.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:55.428Z,1516917535.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:55.530Z,1516917535.530 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:58:55.531Z,1516917535.531 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:55.829Z,1516917535.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:56.133Z,1516917536.133 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:58:56.134Z,1516917536.134 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:56.240Z,1516917536.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:56.639Z,1516917536.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:57.029Z,1516917537.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:57.334Z,1516917537.334 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:58:57.335Z,1516917537.335 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:57.420Z,1516917537.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:57.820Z,1516917537.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:58.235Z,1516917538.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:58.534Z,1516917538.534 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:58:58.535Z,1516917538.535 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:58:58.641Z,1516917538.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:58.644Z,1516917538.644 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-25T21:53:58.4Z
2018-01-25T21:58:58.649Z,1516917538.649 [Default:CheckIn:Read_GPS] Stopped
2018-01-25T21:58:58.649Z,1516917538.649 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-25T21:58:59.036Z,1516917539.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:58:59.138Z,1516917539.138 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:58:59.139Z,1516917539.139 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:00.338Z,1516917540.338 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:59:00.339Z,1516917540.339 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:01.538Z,1516917541.538 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:01.539Z,1516917541.539 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:02.142Z,1516917542.142 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:59:02.144Z,1516917542.144 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:02.448Z,1516917542.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:02.529Z,1516917542.529 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180125T211802/Courier0016.lzma
2018-01-25T21:59:02.598Z,1516917542.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:02.906Z,1516917542.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:03.279Z,1516917543.279 [DataOverHttps](INFO): Moved sent file to Logs/20180125T211802/Courier0016.lzma.bak
2018-01-25T21:59:03.279Z,1516917543.279 [DataOverHttps](INFO): SBD MOMSN=7761297
2018-01-25T21:59:03.314Z,1516917543.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:03.342Z,1516917543.342 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:03.343Z,1516917543.343 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:04.042Z,1516917544.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:04.162Z,1516917544.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:04.542Z,1516917544.542 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:04.543Z,1516917544.543 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:05.147Z,1516917545.147 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:05.149Z,1516917545.149 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:06.350Z,1516917546.350 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:06.351Z,1516917546.351 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:07.415Z,1516917547.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:07.544Z,1516917547.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:07.550Z,1516917547.550 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:07.551Z,1516917547.551 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:07.914Z,1516917547.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:08.152Z,1516917548.152 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:08.153Z,1516917548.153 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:08.314Z,1516917548.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:08.712Z,1516917548.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:09.115Z,1516917549.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:09.354Z,1516917549.354 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:09.355Z,1516917549.355 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:10.554Z,1516917550.554 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:10.555Z,1516917550.555 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:11.156Z,1516917551.156 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:11.158Z,1516917551.158 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:12.349Z,1516917552.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:12.358Z,1516917552.358 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:12.359Z,1516917552.359 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:12.437Z,1516917552.437 [DataOverHttps](INFO): Sending 144 bytes from file Logs/20180125T211802/Express0017.lzma
2018-01-25T21:59:12.503Z,1516917552.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:12.819Z,1516917552.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:13.175Z,1516917553.175 [DataOverHttps](INFO): Moved sent file to Logs/20180125T211802/Express0017.lzma.bak
2018-01-25T21:59:13.175Z,1516917553.175 [DataOverHttps](INFO): SBD MOMSN=7761299
2018-01-25T21:59:13.234Z,1516917553.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:13.558Z,1516917553.558 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:13.559Z,1516917553.559 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:14.085Z,1516917554.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:14.088Z,1516917554.088 [Default:CheckIn:Read_Iridium] Stopped
2018-01-25T21:59:14.088Z,1516917554.088 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-25T21:59:14.088Z,1516917554.088 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-25T21:59:14.161Z,1516917554.161 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:14.162Z,1516917554.162 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:14.234Z,1516917554.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:15.362Z,1516917555.362 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:59:15.363Z,1516917555.363 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:16.562Z,1516917556.562 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:16.563Z,1516917556.563 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:17.166Z,1516917557.166 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:17.167Z,1516917557.167 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:17.498Z,1516917557.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:17.638Z,1516917557.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:17.998Z,1516917557.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:18.366Z,1516917558.366 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:18.367Z,1516917558.367 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:18.379Z,1516917558.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:18.782Z,1516917558.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:19.193Z,1516917559.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:19.566Z,1516917559.566 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:19.567Z,1516917559.567 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:19.579Z,1516917559.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:20.038Z,1516917560.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:20.170Z,1516917560.170 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:20.172Z,1516917560.172 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:20.394Z,1516917560.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:20.803Z,1516917560.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:21.197Z,1516917561.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:21.370Z,1516917561.370 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:21.371Z,1516917561.371 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:21.596Z,1516917561.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:21.994Z,1516917561.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:22.378Z,1516917562.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:22.570Z,1516917562.570 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:22.571Z,1516917562.571 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:22.784Z,1516917562.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:23.175Z,1516917563.175 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:23.176Z,1516917563.176 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:23.233Z,1516917563.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:23.610Z,1516917563.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:23.986Z,1516917563.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:24.374Z,1516917564.374 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:24.375Z,1516917564.375 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:24.386Z,1516917564.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:24.785Z,1516917564.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:25.195Z,1516917565.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:25.574Z,1516917565.574 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:25.575Z,1516917565.575 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:25.583Z,1516917565.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:25.994Z,1516917565.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:26.179Z,1516917566.179 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:26.181Z,1516917566.181 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:26.392Z,1516917566.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:26.798Z,1516917566.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:27.195Z,1516917567.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:27.382Z,1516917567.382 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:27.383Z,1516917567.383 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:27.587Z,1516917567.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:27.984Z,1516917567.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:28.380Z,1516917568.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:28.582Z,1516917568.582 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:28.583Z,1516917568.583 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:28.798Z,1516917568.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:29.219Z,1516917569.219 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:29.221Z,1516917569.221 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:29.256Z,1516917569.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:29.592Z,1516917569.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:29.982Z,1516917569.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:30.386Z,1516917570.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:30.422Z,1516917570.422 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:30.423Z,1516917570.423 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:30.790Z,1516917570.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:31.192Z,1516917571.192 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:31.194Z,1516917571.194 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:31.210Z,1516917571.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:31.598Z,1516917571.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:31.974Z,1516917571.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:32.378Z,1516917572.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:32.394Z,1516917572.394 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:32.396Z,1516917572.396 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:32.804Z,1516917572.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:33.222Z,1516917573.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:33.588Z,1516917573.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:33.594Z,1516917573.594 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:59:33.595Z,1516917573.595 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:33.986Z,1516917573.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:34.192Z,1516917574.192 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:34.193Z,1516917574.193 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:34.380Z,1516917574.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:34.785Z,1516917574.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:35.200Z,1516917575.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:35.394Z,1516917575.394 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:35.395Z,1516917575.395 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:35.598Z,1516917575.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:35.983Z,1516917575.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:36.386Z,1516917576.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:36.594Z,1516917576.594 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:36.595Z,1516917576.595 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:36.806Z,1516917576.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:37.197Z,1516917577.197 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010806 psu
2018-01-25T21:59:37.198Z,1516917577.198 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:37.206Z,1516917577.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:37.589Z,1516917577.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:37.984Z,1516917577.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:38.382Z,1516917578.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:38.398Z,1516917578.398 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:38.399Z,1516917578.399 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:38.786Z,1516917578.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:39.260Z,1516917579.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:39.596Z,1516917579.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:39.598Z,1516917579.598 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010835 psu
2018-01-25T21:59:39.599Z,1516917579.599 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:40.023Z,1516917580.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:40.201Z,1516917580.201 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:40.203Z,1516917580.203 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:40.390Z,1516917580.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:40.827Z,1516917580.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:41.250Z,1516917581.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:41.402Z,1516917581.402 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:41.403Z,1516917581.403 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:41.602Z,1516917581.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:41.992Z,1516917581.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:42.394Z,1516917582.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:42.602Z,1516917582.602 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:42.603Z,1516917582.603 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:42.792Z,1516917582.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:43.206Z,1516917583.206 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:43.207Z,1516917583.207 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:43.237Z,1516917583.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:43.595Z,1516917583.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:43.610Z,1516917583.610 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:59:43.978Z,1516917583.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:44.383Z,1516917584.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:44.405Z,1516917584.405 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:59:44.406Z,1516917584.406 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:44.408Z,1516917584.408 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:44.788Z,1516917584.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:44.809Z,1516917584.809 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:59:45.216Z,1516917585.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:45.598Z,1516917585.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:45.605Z,1516917585.605 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:59:45.606Z,1516917585.606 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:45.608Z,1516917585.608 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:45.982Z,1516917585.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:46.013Z,1516917586.013 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:59:46.210Z,1516917586.210 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:46.212Z,1516917586.212 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:46.423Z,1516917586.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:46.613Z,1516917586.613 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:59:46.807Z,1516917586.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:47.234Z,1516917587.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:47.409Z,1516917587.409 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:59:47.410Z,1516917587.410 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:47.412Z,1516917587.412 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:47.602Z,1516917587.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:47.813Z,1516917587.813 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:59:48.015Z,1516917588.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:48.436Z,1516917588.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:48.609Z,1516917588.609 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:59:48.610Z,1516917588.610 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:48.612Z,1516917588.612 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:48.803Z,1516917588.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:49.013Z,1516917589.013 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:59:49.215Z,1516917589.215 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:49.217Z,1516917589.217 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:49.261Z,1516917589.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:49.598Z,1516917589.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:49.621Z,1516917589.621 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:59:50.002Z,1516917590.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:50.386Z,1516917590.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:50.417Z,1516917590.417 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:59:50.418Z,1516917590.418 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:50.420Z,1516917590.420 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:50.821Z,1516917590.821 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:59:50.827Z,1516917590.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:51.237Z,1516917591.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:51.611Z,1516917591.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:51.617Z,1516917591.617 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:59:51.618Z,1516917591.618 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:51.620Z,1516917591.620 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:52.010Z,1516917592.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:52.021Z,1516917592.021 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:59:52.221Z,1516917592.221 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:52.222Z,1516917592.222 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:52.383Z,1516917592.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:52.625Z,1516917592.625 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:59:52.869Z,1516917592.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:53.242Z,1516917593.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:53.421Z,1516917593.421 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:59:53.422Z,1516917593.422 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:53.424Z,1516917593.424 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:53.623Z,1516917593.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:53.826Z,1516917593.826 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:59:54.038Z,1516917594.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:54.394Z,1516917594.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:54.621Z,1516917594.621 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:59:54.622Z,1516917594.622 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:54.624Z,1516917594.624 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:54.822Z,1516917594.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:55.026Z,1516917595.026 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:59:55.224Z,1516917595.224 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:55.226Z,1516917595.226 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:55.238Z,1516917595.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:55.611Z,1516917595.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:55.633Z,1516917595.633 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:59:56.008Z,1516917596.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:56.378Z,1516917596.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:56.430Z,1516917596.430 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:59:56.430Z,1516917596.430 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:56.432Z,1516917596.432 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:56.827Z,1516917596.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:56.833Z,1516917596.833 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T21:59:57.246Z,1516917597.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:57.610Z,1516917597.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:57.630Z,1516917597.630 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:57.631Z,1516917597.631 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:58.014Z,1516917598.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:58.229Z,1516917598.229 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:58.230Z,1516917598.230 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:58.395Z,1516917598.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:58.854Z,1516917598.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:59.246Z,1516917599.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:59.430Z,1516917599.430 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T21:59:59.431Z,1516917599.431 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T21:59:59.626Z,1516917599.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T21:59:59.990Z,1516917599.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:00.389Z,1516917600.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:00.630Z,1516917600.630 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:00.631Z,1516917600.631 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:00.799Z,1516917600.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:01.198Z,1516917601.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:01.234Z,1516917601.234 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:01.235Z,1516917601.235 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:01.592Z,1516917601.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:01.637Z,1516917601.637 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:01.989Z,1516917601.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:02.385Z,1516917602.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:02.434Z,1516917602.434 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:02.434Z,1516917602.434 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:02.436Z,1516917602.436 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:02.802Z,1516917602.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:02.837Z,1516917602.837 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:03.202Z,1516917603.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:03.598Z,1516917603.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:03.633Z,1516917603.633 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:03.634Z,1516917603.634 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:03.636Z,1516917603.636 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:03.983Z,1516917603.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:04.037Z,1516917604.037 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:04.240Z,1516917604.240 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:04.242Z,1516917604.242 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:04.383Z,1516917604.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:04.645Z,1516917604.645 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:04.813Z,1516917604.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:05.214Z,1516917605.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:05.443Z,1516917605.443 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:05.444Z,1516917605.444 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:05.446Z,1516917605.446 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:05.603Z,1516917605.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:05.849Z,1516917605.849 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:05.987Z,1516917605.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:06.242Z,1516917606.242 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:06.243Z,1516917606.243 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:06.387Z,1516917606.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:06.645Z,1516917606.645 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:06.793Z,1516917606.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:07.200Z,1516917607.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:07.441Z,1516917607.441 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:07.442Z,1516917607.442 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:07.444Z,1516917607.444 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:07.595Z,1516917607.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:07.845Z,1516917607.845 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:07.989Z,1516917607.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:08.385Z,1516917608.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:08.641Z,1516917608.641 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:08.642Z,1516917608.642 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:08.643Z,1516917608.643 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:08.800Z,1516917608.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:09.045Z,1516917609.045 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:09.194Z,1516917609.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:09.246Z,1516917609.246 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:09.247Z,1516917609.247 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:09.603Z,1516917609.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:09.649Z,1516917609.649 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:10.006Z,1516917610.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:10.392Z,1516917610.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:10.445Z,1516917610.445 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:10.446Z,1516917610.446 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:10.448Z,1516917610.448 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:10.798Z,1516917610.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:10.849Z,1516917610.849 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:11.201Z,1516917611.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:11.591Z,1516917611.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:11.645Z,1516917611.645 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:11.646Z,1516917611.646 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:11.648Z,1516917611.648 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:12.000Z,1516917612.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:12.049Z,1516917612.049 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:12.250Z,1516917612.250 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:12.252Z,1516917612.252 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:12.403Z,1516917612.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:12.653Z,1516917612.653 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:12.802Z,1516917612.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:13.195Z,1516917613.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:13.449Z,1516917613.449 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:13.450Z,1516917613.450 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:13.451Z,1516917613.451 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:13.598Z,1516917613.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:13.853Z,1516917613.853 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:14.003Z,1516917614.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:14.386Z,1516917614.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:14.649Z,1516917614.649 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:14.650Z,1516917614.650 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:14.651Z,1516917614.651 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:14.807Z,1516917614.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:15.053Z,1516917615.053 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:15.255Z,1516917615.255 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:15.257Z,1516917615.257 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:15.661Z,1516917615.661 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:16.457Z,1516917616.457 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:16.458Z,1516917616.458 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:16.460Z,1516917616.460 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:16.861Z,1516917616.861 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:17.657Z,1516917617.657 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:17.658Z,1516917617.658 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:17.659Z,1516917617.659 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:18.061Z,1516917618.061 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:18.086Z,1516917618.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:18.263Z,1516917618.263 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:18.265Z,1516917618.265 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:18.267Z,1516917618.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:18.586Z,1516917618.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:18.669Z,1516917618.669 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:18.976Z,1516917618.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:19.369Z,1516917619.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:19.465Z,1516917619.465 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:19.466Z,1516917619.466 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:19.468Z,1516917619.468 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:19.779Z,1516917619.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:19.869Z,1516917619.869 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:20.188Z,1516917620.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:20.582Z,1516917620.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:20.665Z,1516917620.665 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:20.666Z,1516917620.666 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:20.668Z,1516917620.668 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:20.994Z,1516917620.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:21.069Z,1516917621.069 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:21.264Z,1516917621.264 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:21.266Z,1516917621.266 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:21.382Z,1516917621.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:21.669Z,1516917621.669 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:21.777Z,1516917621.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:22.178Z,1516917622.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:22.465Z,1516917622.465 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:22.466Z,1516917622.466 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:22.468Z,1516917622.468 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:22.583Z,1516917622.583 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:22.583Z,1516917622.583 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 14
2018-01-25T22:00:22.583Z,1516917622.583 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-25T22:00:22.589Z,1516917622.589 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:22.589Z,1516917622.589 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14
2018-01-25T22:00:22.589Z,1516917622.589 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-25T22:00:22.591Z,1516917622.591 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:22.591Z,1516917622.591 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2018-01-25T22:00:22.591Z,1516917622.591 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-25T22:00:22.615Z,1516917622.615 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-25T22:00:22.615Z,1516917622.615 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-25T22:00:22.615Z,1516917622.615 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-25T22:00:22.869Z,1516917622.869 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:23.005Z,1516917623.005 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-25T22:00:23.005Z,1516917623.005 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 14
2018-01-25T22:00:23.006Z,1516917623.006 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-25T22:00:23.006Z,1516917623.006 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14
2018-01-25T22:00:23.006Z,1516917623.006 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-25T22:00:23.007Z,1516917623.007 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2018-01-25T22:00:23.391Z,1516917623.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-25T22:00:23.392Z,1516917623.392 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T22:00:23.392Z,1516917623.392 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T22:00:23.393Z,1516917623.393 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-25T22:00:23.393Z,1516917623.393 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T22:00:23.394Z,1516917623.394 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T22:00:23.394Z,1516917623.394 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-25T22:00:23.394Z,1516917623.394 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T22:00:23.395Z,1516917623.395 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T22:00:23.665Z,1516917623.665 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:23.666Z,1516917623.666 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:23.668Z,1516917623.668 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:23.794Z,1516917623.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-25T22:00:23.795Z,1516917623.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:24.069Z,1516917624.069 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:24.168Z,1516917624.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-25T22:00:24.169Z,1516917624.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:24.269Z,1516917624.269 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:24.270Z,1516917624.270 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:24.578Z,1516917624.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-25T22:00:24.579Z,1516917624.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:24.673Z,1516917624.673 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:24.981Z,1516917624.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-25T22:00:24.982Z,1516917624.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:25.367Z,1516917625.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-25T22:00:25.368Z,1516917625.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:25.469Z,1516917625.469 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:25.470Z,1516917625.470 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:25.472Z,1516917625.472 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:25.771Z,1516917625.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-25T22:00:25.772Z,1516917625.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:25.873Z,1516917625.873 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:26.182Z,1516917626.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-25T22:00:26.183Z,1516917626.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:26.581Z,1516917626.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-25T22:00:26.582Z,1516917626.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:26.669Z,1516917626.669 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:26.670Z,1516917626.670 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:26.672Z,1516917626.672 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:26.977Z,1516917626.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-25T22:00:26.978Z,1516917626.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:27.073Z,1516917627.073 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:27.275Z,1516917627.275 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:27.276Z,1516917627.276 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:27.381Z,1516917627.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-25T22:00:27.382Z,1516917627.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:27.677Z,1516917627.677 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:27.768Z,1516917627.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-25T22:00:27.769Z,1516917627.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:28.167Z,1516917628.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-25T22:00:28.169Z,1516917628.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:28.473Z,1516917628.473 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:28.474Z,1516917628.474 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:28.476Z,1516917628.476 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:28.583Z,1516917628.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-25T22:00:28.584Z,1516917628.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:28.877Z,1516917628.877 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:28.978Z,1516917628.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-25T22:00:28.979Z,1516917628.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:29.386Z,1516917629.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-25T22:00:29.387Z,1516917629.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:29.673Z,1516917629.673 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:29.674Z,1516917629.674 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:29.675Z,1516917629.675 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:29.778Z,1516917629.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-25T22:00:29.779Z,1516917629.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:30.077Z,1516917630.077 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:30.172Z,1516917630.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-25T22:00:30.173Z,1516917630.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:30.278Z,1516917630.278 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:30.280Z,1516917630.280 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:30.571Z,1516917630.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-25T22:00:30.572Z,1516917630.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:30.681Z,1516917630.681 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:30.977Z,1516917630.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-25T22:00:30.978Z,1516917630.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:31.409Z,1516917631.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-25T22:00:31.410Z,1516917631.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:31.477Z,1516917631.477 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:31.478Z,1516917631.478 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:31.480Z,1516917631.480 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:31.775Z,1516917631.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-25T22:00:31.776Z,1516917631.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:31.881Z,1516917631.881 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:32.195Z,1516917632.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-25T22:00:32.196Z,1516917632.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:32.575Z,1516917632.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-25T22:00:32.576Z,1516917632.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:32.677Z,1516917632.677 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:32.678Z,1516917632.678 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:32.680Z,1516917632.680 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:32.979Z,1516917632.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-25T22:00:32.980Z,1516917632.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:33.081Z,1516917633.081 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:33.311Z,1516917633.311 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:33.312Z,1516917633.312 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:33.365Z,1516917633.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-25T22:00:33.366Z,1516917633.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:33.713Z,1516917633.713 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:33.766Z,1516917633.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-25T22:00:33.767Z,1516917633.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:34.176Z,1516917634.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-25T22:00:34.177Z,1516917634.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:34.509Z,1516917634.509 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:34.510Z,1516917634.510 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:34.512Z,1516917634.512 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:34.562Z,1516917634.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-25T22:00:34.563Z,1516917634.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:34.913Z,1516917634.913 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:34.982Z,1516917634.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-25T22:00:34.983Z,1516917634.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:35.286Z,1516917635.286 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:35.287Z,1516917635.287 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:35.377Z,1516917635.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-25T22:00:35.378Z,1516917635.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:35.689Z,1516917635.689 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:35.776Z,1516917635.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-25T22:00:35.777Z,1516917635.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:36.178Z,1516917636.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-25T22:00:36.179Z,1516917636.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:36.485Z,1516917636.485 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:36.486Z,1516917636.486 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:36.488Z,1516917636.488 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:36.566Z,1516917636.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-25T22:00:36.567Z,1516917636.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:36.889Z,1516917636.889 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:36.970Z,1516917636.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-25T22:00:36.971Z,1516917636.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:37.379Z,1516917637.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-25T22:00:37.380Z,1516917637.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:37.685Z,1516917637.685 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:37.686Z,1516917637.686 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:37.688Z,1516917637.688 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:37.794Z,1516917637.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-25T22:00:37.795Z,1516917637.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:38.089Z,1516917638.089 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:38.176Z,1516917638.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-25T22:00:38.181Z,1516917638.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:38.291Z,1516917638.291 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:38.292Z,1516917638.292 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:38.578Z,1516917638.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-25T22:00:38.579Z,1516917638.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:38.693Z,1516917638.693 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:38.986Z,1516917638.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-25T22:00:38.987Z,1516917638.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:39.378Z,1516917639.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-25T22:00:39.379Z,1516917639.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:39.489Z,1516917639.489 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:39.490Z,1516917639.490 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:39.492Z,1516917639.492 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:39.777Z,1516917639.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-25T22:00:39.778Z,1516917639.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:39.895Z,1516917639.895 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:40.178Z,1516917640.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-25T22:00:40.179Z,1516917640.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:40.573Z,1516917640.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-25T22:00:40.574Z,1516917640.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:40.689Z,1516917640.689 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:40.690Z,1516917640.690 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:40.691Z,1516917640.691 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:40.982Z,1516917640.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-25T22:00:40.983Z,1516917640.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:41.095Z,1516917641.095 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:41.297Z,1516917641.297 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:41.298Z,1516917641.298 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:41.407Z,1516917641.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-25T22:00:41.408Z,1516917641.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:41.701Z,1516917641.701 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:41.786Z,1516917641.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-25T22:00:41.787Z,1516917641.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:42.168Z,1516917642.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-25T22:00:42.169Z,1516917642.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:42.497Z,1516917642.497 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:42.498Z,1516917642.498 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:42.500Z,1516917642.500 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:42.582Z,1516917642.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-25T22:00:42.583Z,1516917642.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:42.901Z,1516917642.901 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:42.974Z,1516917642.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:43.374Z,1516917643.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:43.697Z,1516917643.697 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:43.698Z,1516917643.698 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:43.699Z,1516917643.699 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:43.769Z,1516917643.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:44.101Z,1516917644.101 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:44.186Z,1516917644.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:44.300Z,1516917644.300 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:44.301Z,1516917644.301 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:44.584Z,1516917644.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:44.705Z,1516917644.705 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:44.979Z,1516917644.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:45.365Z,1516917645.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:45.501Z,1516917645.501 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:45.502Z,1516917645.502 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:45.504Z,1516917645.504 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:45.762Z,1516917645.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:45.905Z,1516917645.905 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:46.161Z,1516917646.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:46.562Z,1516917646.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:46.701Z,1516917646.701 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:46.702Z,1516917646.702 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:46.703Z,1516917646.703 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:46.972Z,1516917646.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:47.105Z,1516917647.105 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:47.304Z,1516917647.304 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:47.306Z,1516917647.306 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:47.390Z,1516917647.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:47.709Z,1516917647.709 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:47.780Z,1516917647.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:48.168Z,1516917648.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:48.505Z,1516917648.505 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:48.506Z,1516917648.506 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:48.508Z,1516917648.508 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:48.580Z,1516917648.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:48.909Z,1516917648.909 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:48.972Z,1516917648.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:49.369Z,1516917649.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:49.705Z,1516917649.705 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:49.706Z,1516917649.706 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:49.708Z,1516917649.708 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:49.778Z,1516917649.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:50.109Z,1516917650.109 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:50.190Z,1516917650.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:50.311Z,1516917650.311 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:50.312Z,1516917650.312 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:50.582Z,1516917650.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:50.713Z,1516917650.713 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:50.979Z,1516917650.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:51.380Z,1516917651.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:51.509Z,1516917651.509 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:51.510Z,1516917651.510 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:51.512Z,1516917651.512 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:51.779Z,1516917651.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:51.913Z,1516917651.913 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:52.179Z,1516917652.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:52.580Z,1516917652.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:52.709Z,1516917652.709 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:52.710Z,1516917652.710 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:52.711Z,1516917652.711 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:52.979Z,1516917652.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:53.113Z,1516917653.113 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:53.314Z,1516917653.314 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:53.315Z,1516917653.315 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:53.382Z,1516917653.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:53.717Z,1516917653.717 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:53.784Z,1516917653.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:54.161Z,1516917654.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:54.513Z,1516917654.513 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:54.514Z,1516917654.514 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:54.516Z,1516917654.516 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:54.582Z,1516917654.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:54.917Z,1516917654.917 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:54.978Z,1516917654.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:55.372Z,1516917655.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:55.713Z,1516917655.713 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:55.714Z,1516917655.714 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:55.716Z,1516917655.716 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:55.790Z,1516917655.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:56.117Z,1516917656.117 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:56.191Z,1516917656.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:56.319Z,1516917656.319 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:56.320Z,1516917656.320 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:56.594Z,1516917656.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:56.721Z,1516917656.721 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:56.983Z,1516917656.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:57.370Z,1516917657.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:57.517Z,1516917657.517 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:57.518Z,1516917657.518 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:57.520Z,1516917657.520 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:57.770Z,1516917657.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:57.921Z,1516917657.921 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:58.194Z,1516917658.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:58.564Z,1516917658.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:58.717Z,1516917658.717 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:58.718Z,1516917658.718 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:58.719Z,1516917658.719 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:58.980Z,1516917658.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:59.121Z,1516917659.121 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:59.323Z,1516917659.323 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:00:59.324Z,1516917659.324 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:00:59.382Z,1516917659.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:00:59.733Z,1516917659.733 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:00:59.784Z,1516917659.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:00.169Z,1516917660.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:00.529Z,1516917660.529 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:00.530Z,1516917660.530 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:00.532Z,1516917660.532 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:00.581Z,1516917660.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:00.936Z,1516917660.936 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:00.983Z,1516917660.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:01.377Z,1516917661.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:01.729Z,1516917661.729 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:01.730Z,1516917661.730 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:01.731Z,1516917661.731 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:01.802Z,1516917661.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:02.133Z,1516917662.133 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:02.198Z,1516917662.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:02.329Z,1516917662.329 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:02.330Z,1516917662.330 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:02.534Z,1516917662.534 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-25T22:01:02.534Z,1516917662.534 [NAL9602] Data Fault, FailCount= 4
2018-01-25T22:01:02.534Z,1516917662.534 [NAL9602](ERROR): Data Fault
2018-01-25T22:01:02.570Z,1516917662.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:02.611Z,1516917662.611 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-25T22:01:02.733Z,1516917662.733 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:02.938Z,1516917662.938 [NAL9602](INFO): Powering down
2018-01-25T22:01:02.969Z,1516917662.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:03.368Z,1516917663.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:03.531Z,1516917663.531 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:03.532Z,1516917663.532 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:03.533Z,1516917663.533 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:03.768Z,1516917663.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:03.797Z,1516917663.797 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-25T22:01:03.797Z,1516917663.797 [NAL9602] No Fault, FailCount= 4
2018-01-25T22:01:03.937Z,1516917663.937 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:04.167Z,1516917664.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:04.568Z,1516917664.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:04.733Z,1516917664.733 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:04.734Z,1516917664.734 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:04.735Z,1516917664.735 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:04.971Z,1516917664.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:05.137Z,1516917665.137 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:05.339Z,1516917665.339 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:05.340Z,1516917665.340 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:05.378Z,1516917665.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:05.742Z,1516917665.742 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:05.773Z,1516917665.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:06.174Z,1516917666.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:06.537Z,1516917666.537 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:06.538Z,1516917666.538 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:06.540Z,1516917666.540 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:06.582Z,1516917666.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:06.943Z,1516917666.943 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:06.981Z,1516917666.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:07.374Z,1516917667.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:07.739Z,1516917667.739 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:07.740Z,1516917667.740 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:07.742Z,1516917667.742 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:07.785Z,1516917667.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:08.146Z,1516917668.146 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:08.178Z,1516917668.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:08.337Z,1516917668.337 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:08.338Z,1516917668.338 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:08.568Z,1516917668.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:08.741Z,1516917668.741 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:08.976Z,1516917668.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:09.379Z,1516917669.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:09.537Z,1516917669.537 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:09.538Z,1516917669.538 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:09.540Z,1516917669.540 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:09.768Z,1516917669.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:09.941Z,1516917669.941 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:10.176Z,1516917670.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:10.578Z,1516917670.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:10.737Z,1516917670.737 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:10.738Z,1516917670.738 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:10.739Z,1516917670.739 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:10.976Z,1516917670.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:11.141Z,1516917671.141 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:11.343Z,1516917671.343 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:11.347Z,1516917671.347 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:11.400Z,1516917671.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:11.751Z,1516917671.751 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:11.777Z,1516917671.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:12.180Z,1516917672.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:12.546Z,1516917672.546 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:12.547Z,1516917672.547 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:12.549Z,1516917672.549 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:12.598Z,1516917672.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:12.953Z,1516917672.953 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:12.979Z,1516917672.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:13.390Z,1516917673.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:13.749Z,1516917673.749 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:13.750Z,1516917673.750 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:13.751Z,1516917673.751 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:13.770Z,1516917673.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:14.153Z,1516917674.153 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:14.166Z,1516917674.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:14.346Z,1516917674.346 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:14.347Z,1516917674.347 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:14.575Z,1516917674.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:14.749Z,1516917674.749 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:14.971Z,1516917674.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:15.545Z,1516917675.545 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:15.546Z,1516917675.546 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:15.548Z,1516917675.548 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:15.949Z,1516917675.949 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:16.745Z,1516917676.745 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:16.746Z,1516917676.746 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:16.748Z,1516917676.748 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:17.149Z,1516917677.149 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:17.351Z,1516917677.351 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:17.352Z,1516917677.352 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:17.757Z,1516917677.757 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:18.242Z,1516917678.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:18.398Z,1516917678.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:18.553Z,1516917678.553 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:18.554Z,1516917678.554 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:18.556Z,1516917678.556 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:18.714Z,1516917678.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:18.957Z,1516917678.957 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:19.105Z,1516917679.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:19.500Z,1516917679.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:19.753Z,1516917679.753 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:19.754Z,1516917679.754 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:19.756Z,1516917679.756 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:19.908Z,1516917679.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:20.157Z,1516917680.157 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:20.308Z,1516917680.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:20.356Z,1516917680.356 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:20.357Z,1516917680.357 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:20.707Z,1516917680.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:20.761Z,1516917680.761 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:21.108Z,1516917681.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:21.506Z,1516917681.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:21.557Z,1516917681.557 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:21.558Z,1516917681.558 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:21.560Z,1516917681.560 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:21.907Z,1516917681.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:21.961Z,1516917681.961 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:22.311Z,1516917682.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:22.708Z,1516917682.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:22.757Z,1516917682.757 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:22.758Z,1516917682.758 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:22.759Z,1516917682.759 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:23.111Z,1516917683.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:23.161Z,1516917683.161 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:23.360Z,1516917683.360 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:23.361Z,1516917683.361 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:23.511Z,1516917683.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:23.765Z,1516917683.765 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:23.912Z,1516917683.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:24.311Z,1516917684.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:24.561Z,1516917684.561 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:24.562Z,1516917684.562 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:24.564Z,1516917684.564 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:24.710Z,1516917684.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:24.965Z,1516917684.965 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:25.117Z,1516917685.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:25.493Z,1516917685.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:25.761Z,1516917685.761 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:25.762Z,1516917685.762 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:25.763Z,1516917685.763 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:25.920Z,1516917685.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:26.165Z,1516917686.165 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:26.298Z,1516917686.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:26.365Z,1516917686.365 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:26.366Z,1516917686.366 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:26.698Z,1516917686.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:26.769Z,1516917686.769 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:27.102Z,1516917687.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:27.502Z,1516917687.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:27.565Z,1516917687.565 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:27.566Z,1516917687.566 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:27.568Z,1516917687.568 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:27.905Z,1516917687.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:27.969Z,1516917687.969 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:28.300Z,1516917688.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:28.699Z,1516917688.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:28.765Z,1516917688.765 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:28.766Z,1516917688.766 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:28.768Z,1516917688.768 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:29.098Z,1516917689.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:29.169Z,1516917689.169 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:29.369Z,1516917689.369 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:29.371Z,1516917689.371 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:29.504Z,1516917689.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:29.775Z,1516917689.775 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:29.886Z,1516917689.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:29.899Z,1516917689.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:30.285Z,1516917690.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:30.299Z,1516917690.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:30.569Z,1516917690.569 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:30.570Z,1516917690.570 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:30.572Z,1516917690.572 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:30.698Z,1516917690.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:30.712Z,1516917690.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:30.973Z,1516917690.973 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:31.110Z,1516917691.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:31.500Z,1516917691.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:31.769Z,1516917691.769 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:31.770Z,1516917691.770 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:31.772Z,1516917691.772 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:31.910Z,1516917691.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:32.173Z,1516917692.173 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:32.309Z,1516917692.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:32.374Z,1516917692.374 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:32.376Z,1516917692.376 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:32.700Z,1516917692.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:32.777Z,1516917692.777 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:33.062Z,1516917693.062 [NAL9602](INFO): Powering up NAL9602
2018-01-25T22:01:33.119Z,1516917693.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:33.506Z,1516917693.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:33.573Z,1516917693.573 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:33.574Z,1516917693.574 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:33.576Z,1516917693.576 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:33.900Z,1516917693.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:33.977Z,1516917693.977 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:34.300Z,1516917694.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:34.708Z,1516917694.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:34.773Z,1516917694.773 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:34.774Z,1516917694.774 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:01:34.776Z,1516917694.776 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:35.107Z,1516917695.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:35.177Z,1516917695.177 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:35.379Z,1516917695.379 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:35.380Z,1516917695.380 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:35.504Z,1516917695.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:35.781Z,1516917695.781 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:35.912Z,1516917695.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:36.309Z,1516917696.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:36.577Z,1516917696.577 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:36.578Z,1516917696.578 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:36.580Z,1516917696.580 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:36.711Z,1516917696.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:36.981Z,1516917696.981 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:37.112Z,1516917697.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:37.492Z,1516917697.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:37.777Z,1516917697.777 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:37.778Z,1516917697.778 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:37.780Z,1516917697.780 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:37.914Z,1516917697.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:38.181Z,1516917698.181 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:38.314Z,1516917698.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:38.384Z,1516917698.384 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:38.385Z,1516917698.385 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:38.698Z,1516917698.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:38.789Z,1516917698.789 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:39.098Z,1516917699.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:39.492Z,1516917699.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:39.585Z,1516917699.585 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:39.586Z,1516917699.586 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:39.588Z,1516917699.588 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:39.898Z,1516917699.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:39.989Z,1516917699.989 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:40.298Z,1516917700.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:40.697Z,1516917700.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:40.785Z,1516917700.785 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:40.786Z,1516917700.786 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:01:40.787Z,1516917700.787 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:41.098Z,1516917701.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:41.189Z,1516917701.189 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:41.388Z,1516917701.388 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:41.389Z,1516917701.389 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:41.519Z,1516917701.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:41.793Z,1516917701.793 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:41.895Z,1516917701.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:42.295Z,1516917702.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:42.589Z,1516917702.589 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:42.590Z,1516917702.590 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:42.592Z,1516917702.592 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:42.703Z,1516917702.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:42.993Z,1516917702.993 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:43.102Z,1516917703.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:43.502Z,1516917703.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:43.789Z,1516917703.789 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:43.790Z,1516917703.790 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:43.792Z,1516917703.792 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:43.923Z,1516917703.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:44.193Z,1516917704.193 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:44.269Z,1516917704.269 [NAL9602](INFO): NAL9602 initialized
2018-01-25T22:01:44.301Z,1516917704.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:44.393Z,1516917704.393 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:44.394Z,1516917704.394 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:44.710Z,1516917704.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:44.797Z,1516917704.797 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:45.114Z,1516917705.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:45.510Z,1516917705.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:45.593Z,1516917705.593 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:45.594Z,1516917705.594 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:45.596Z,1516917705.596 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:45.908Z,1516917705.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:45.997Z,1516917705.997 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:46.308Z,1516917706.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:46.709Z,1516917706.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:46.793Z,1516917706.793 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:46.794Z,1516917706.794 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:01:46.796Z,1516917706.796 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:47.113Z,1516917707.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:47.197Z,1516917707.197 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:47.397Z,1516917707.397 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:47.399Z,1516917707.399 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:47.518Z,1516917707.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:47.801Z,1516917707.801 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:47.922Z,1516917707.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:48.305Z,1516917708.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:48.597Z,1516917708.597 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:48.598Z,1516917708.598 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:01:48.600Z,1516917708.600 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:48.714Z,1516917708.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:49.001Z,1516917709.001 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:49.109Z,1516917709.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:49.493Z,1516917709.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:49.797Z,1516917709.797 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:49.798Z,1516917709.798 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:49.800Z,1516917709.800 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:49.927Z,1516917709.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:50.201Z,1516917710.201 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:50.317Z,1516917710.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:50.402Z,1516917710.402 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:50.403Z,1516917710.403 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:50.730Z,1516917710.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:50.805Z,1516917710.805 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:51.100Z,1516917711.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:51.498Z,1516917711.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:51.601Z,1516917711.601 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:51.602Z,1516917711.602 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:51.604Z,1516917711.604 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:51.908Z,1516917711.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:52.005Z,1516917712.005 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:52.302Z,1516917712.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:52.700Z,1516917712.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:52.802Z,1516917712.802 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:52.802Z,1516917712.802 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:52.804Z,1516917712.804 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:53.108Z,1516917713.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:53.205Z,1516917713.205 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:53.406Z,1516917713.406 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:01:53.408Z,1516917713.408 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:53.511Z,1516917713.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:53.809Z,1516917713.809 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:53.903Z,1516917713.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:54.300Z,1516917714.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:54.605Z,1516917714.605 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:54.606Z,1516917714.606 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:54.608Z,1516917714.608 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:54.704Z,1516917714.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:55.009Z,1516917715.009 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:55.111Z,1516917715.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:55.499Z,1516917715.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:55.806Z,1516917715.806 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:55.807Z,1516917715.807 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:01:55.808Z,1516917715.808 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:55.922Z,1516917715.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:56.213Z,1516917716.213 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:56.314Z,1516917716.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:56.411Z,1516917716.411 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:01:56.412Z,1516917716.412 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:56.714Z,1516917716.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:56.817Z,1516917716.817 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:57.108Z,1516917717.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:57.501Z,1516917717.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:57.613Z,1516917717.613 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:57.614Z,1516917717.614 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:57.616Z,1516917717.616 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:57.903Z,1516917717.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:58.017Z,1516917718.017 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:58.308Z,1516917718.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:58.702Z,1516917718.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:58.813Z,1516917718.813 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:58.814Z,1516917718.814 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:58.816Z,1516917718.816 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:59.114Z,1516917719.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:59.217Z,1516917719.217 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:59.416Z,1516917719.416 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:01:59.417Z,1516917719.417 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:01:59.525Z,1516917719.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:01:59.822Z,1516917719.822 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:01:59.915Z,1516917719.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:00.302Z,1516917720.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:00.617Z,1516917720.617 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:02:00.618Z,1516917720.618 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:02:00.620Z,1516917720.620 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:00.715Z,1516917720.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:01.021Z,1516917721.021 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:02:01.113Z,1516917721.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:01.502Z,1516917721.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:01.817Z,1516917721.817 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:02:01.818Z,1516917721.818 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:02:01.820Z,1516917721.820 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:01.914Z,1516917721.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:02.221Z,1516917722.221 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:02:02.326Z,1516917722.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:02.420Z,1516917722.420 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:02:02.422Z,1516917722.422 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:02.714Z,1516917722.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:02.825Z,1516917722.825 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:02:03.106Z,1516917723.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:03.505Z,1516917723.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:03.621Z,1516917723.621 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:02:03.622Z,1516917723.622 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:02:03.624Z,1516917723.624 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:03.902Z,1516917723.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:04.025Z,1516917724.025 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:02:04.310Z,1516917724.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:04.707Z,1516917724.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:04.821Z,1516917724.821 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:02:04.822Z,1516917724.822 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:02:04.824Z,1516917724.824 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:05.113Z,1516917725.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:05.225Z,1516917725.225 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:02:05.425Z,1516917725.425 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:02:05.426Z,1516917725.426 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:05.520Z,1516917725.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:05.829Z,1516917725.829 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:02:05.924Z,1516917725.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:06.301Z,1516917726.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:06.625Z,1516917726.625 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:02:06.626Z,1516917726.626 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:02:06.628Z,1516917726.628 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:06.714Z,1516917726.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:07.029Z,1516917727.029 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:02:07.107Z,1516917727.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:07.505Z,1516917727.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:07.825Z,1516917727.825 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:02:07.826Z,1516917727.826 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:02:07.828Z,1516917727.828 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:07.912Z,1516917727.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:08.229Z,1516917728.229 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:02:08.326Z,1516917728.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:08.430Z,1516917728.430 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:02:08.431Z,1516917728.431 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:08.719Z,1516917728.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:08.833Z,1516917728.833 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:02:09.114Z,1516917729.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:09.498Z,1516917729.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:09.629Z,1516917729.629 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:02:09.630Z,1516917729.630 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:02:09.632Z,1516917729.632 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:09.898Z,1516917729.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:10.033Z,1516917730.033 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:02:10.306Z,1516917730.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:10.700Z,1516917730.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:10.829Z,1516917730.829 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:02:10.830Z,1516917730.830 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:02:10.832Z,1516917730.832 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:11.106Z,1516917731.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:11.233Z,1516917731.233 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:02:11.434Z,1516917731.434 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:02:11.436Z,1516917731.436 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:11.530Z,1516917731.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:11.837Z,1516917731.837 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:02:11.910Z,1516917731.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:12.298Z,1516917732.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:12.633Z,1516917732.633 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:02:12.634Z,1516917732.634 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:02:12.636Z,1516917732.636 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:12.717Z,1516917732.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:13.037Z,1516917733.037 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:02:13.100Z,1516917733.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:13.499Z,1516917733.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:13.833Z,1516917733.833 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:02:13.834Z,1516917733.834 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:02:13.836Z,1516917733.836 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:13.926Z,1516917733.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:14.237Z,1516917734.237 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:02:14.330Z,1516917734.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:14.439Z,1516917734.439 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:02:14.440Z,1516917734.440 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:14.713Z,1516917734.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:14.841Z,1516917734.841 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:02:15.113Z,1516917735.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:15.640Z,1516917735.640 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:02:15.641Z,1516917735.641 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:02:15.643Z,1516917735.643 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:16.045Z,1516917736.045 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:02:16.841Z,1516917736.841 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:02:16.842Z,1516917736.842 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:02:16.844Z,1516917736.844 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:17.245Z,1516917737.245 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:02:17.444Z,1516917737.444 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:02:17.445Z,1516917737.445 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:17.849Z,1516917737.849 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:02:18.370Z,1516917738.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:18.503Z,1516917738.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:18.645Z,1516917738.645 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:02:18.646Z,1516917738.646 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:02:18.648Z,1516917738.648 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:18.877Z,1516917738.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:19.049Z,1516917739.049 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:02:19.274Z,1516917739.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:19.662Z,1516917739.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:19.845Z,1516917739.845 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:02:19.846Z,1516917739.846 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:02:19.848Z,1516917739.848 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:20.065Z,1516917740.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:20.249Z,1516917740.249 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:02:20.458Z,1516917740.458 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:02:20.459Z,1516917740.459 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:20.466Z,1516917740.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:20.861Z,1516917740.861 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:02:20.870Z,1516917740.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:21.267Z,1516917741.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:21.640Z,1516917741.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:21.658Z,1516917741.658 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:02:21.659Z,1516917741.659 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:02:21.661Z,1516917741.661 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:22.051Z,1516917742.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:22.065Z,1516917742.065 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:02:22.483Z,1516917742.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:22.861Z,1516917742.861 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:02:22.862Z,1516917742.862 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:02:22.864Z,1516917742.864 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:22.897Z,1516917742.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:23.256Z,1516917743.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:23.265Z,1516917743.265 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:02:23.453Z,1516917743.453 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:02:23.454Z,1516917743.454 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:23.652Z,1516917743.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:23.857Z,1516917743.857 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:02:24.052Z,1516917744.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:24.465Z,1516917744.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:24.653Z,1516917744.653 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:02:24.654Z,1516917744.654 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:02:24.656Z,1516917744.656 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:24.870Z,1516917744.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:25.057Z,1516917745.057 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:02:25.263Z,1516917745.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:25.659Z,1516917745.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:25.853Z,1516917745.853 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:02:25.854Z,1516917745.854 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:02:25.856Z,1516917745.856 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:26.062Z,1516917746.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:26.257Z,1516917746.257 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:02:26.458Z,1516917746.458 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:02:26.460Z,1516917746.460 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:26.486Z,1516917746.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:26.852Z,1516917746.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:26.861Z,1516917746.861 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:02:27.259Z,1516917747.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:27.657Z,1516917747.657 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:02:27.658Z,1516917747.658 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:02:27.660Z,1516917747.660 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:27.664Z,1516917747.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:28.059Z,1516917748.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:28.061Z,1516917748.061 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:02:28.479Z,1516917748.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:28.858Z,1516917748.858 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:02:28.859Z,1516917748.859 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:28.864Z,1516917748.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:29.241Z,1516917749.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:29.462Z,1516917749.462 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:02:29.463Z,1516917749.463 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:29.670Z,1516917749.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:30.046Z,1516917750.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:30.467Z,1516917750.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:30.662Z,1516917750.662 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:02:30.663Z,1516917750.663 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:30.855Z,1516917750.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:31.259Z,1516917751.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:31.651Z,1516917751.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:31.862Z,1516917751.862 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:02:31.863Z,1516917751.863 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:32.049Z,1516917752.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:32.467Z,1516917752.467 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:02:32.468Z,1516917752.468 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:32.471Z,1516917752.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:32.859Z,1516917752.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:33.261Z,1516917753.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:33.662Z,1516917753.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:33.666Z,1516917753.666 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:02:33.667Z,1516917753.667 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:34.049Z,1516917754.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:34.475Z,1516917754.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:34.860Z,1516917754.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:34.866Z,1516917754.866 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:02:34.867Z,1516917754.867 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:35.261Z,1516917755.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:35.471Z,1516917755.471 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:02:35.473Z,1516917755.473 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:35.663Z,1516917755.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:36.057Z,1516917756.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:36.476Z,1516917756.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:36.674Z,1516917756.674 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:02:36.675Z,1516917756.675 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:36.863Z,1516917756.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:37.270Z,1516917757.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:37.659Z,1516917757.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:37.874Z,1516917757.874 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:02:37.876Z,1516917757.876 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:38.059Z,1516917758.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:38.476Z,1516917758.476 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:02:38.477Z,1516917758.477 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:38.487Z,1516917758.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:38.860Z,1516917758.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:39.263Z,1516917759.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:39.664Z,1516917759.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:39.678Z,1516917759.678 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010805 psu
2018-01-25T22:02:39.679Z,1516917759.679 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:40.066Z,1516917760.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:40.470Z,1516917760.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:40.868Z,1516917760.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:40.878Z,1516917760.878 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:02:40.879Z,1516917760.879 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:41.264Z,1516917761.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:41.509Z,1516917761.509 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:02:41.510Z,1516917761.510 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:41.672Z,1516917761.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:42.046Z,1516917762.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:42.441Z,1516917762.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:42.710Z,1516917762.710 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:02:42.711Z,1516917762.711 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:42.873Z,1516917762.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:43.274Z,1516917763.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:43.484Z,1516917763.484 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:02:43.485Z,1516917763.485 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:43.655Z,1516917763.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:44.050Z,1516917764.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:44.450Z,1516917764.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:44.687Z,1516917764.687 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:02:44.688Z,1516917764.688 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:44.855Z,1516917764.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:45.262Z,1516917765.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:45.658Z,1516917765.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:45.886Z,1516917765.886 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:02:45.887Z,1516917765.887 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:46.050Z,1516917766.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:46.446Z,1516917766.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:46.488Z,1516917766.488 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:02:46.490Z,1516917766.490 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:46.862Z,1516917766.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:47.266Z,1516917767.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:47.658Z,1516917767.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:47.690Z,1516917767.690 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:02:47.691Z,1516917767.691 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:48.060Z,1516917768.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:48.452Z,1516917768.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:48.868Z,1516917768.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:48.890Z,1516917768.890 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:02:48.892Z,1516917768.892 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:49.266Z,1516917769.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:49.493Z,1516917769.493 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:02:49.494Z,1516917769.494 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:49.661Z,1516917769.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:50.055Z,1516917770.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:50.456Z,1516917770.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:50.694Z,1516917770.694 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:02:50.695Z,1516917770.695 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:50.862Z,1516917770.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:51.261Z,1516917771.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:51.670Z,1516917771.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:51.894Z,1516917771.894 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:02:51.895Z,1516917771.895 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:52.055Z,1516917772.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:52.458Z,1516917772.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:52.498Z,1516917772.498 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:02:52.499Z,1516917772.499 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:52.869Z,1516917772.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:53.269Z,1516917773.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:53.674Z,1516917773.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:53.698Z,1516917773.698 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:02:53.699Z,1516917773.699 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:54.054Z,1516917774.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:54.452Z,1516917774.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:54.858Z,1516917774.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:54.898Z,1516917774.898 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:02:54.900Z,1516917774.900 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:55.270Z,1516917775.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:55.502Z,1516917775.502 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:02:55.504Z,1516917775.504 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:55.663Z,1516917775.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:56.056Z,1516917776.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:56.460Z,1516917776.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:56.702Z,1516917776.702 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:02:56.703Z,1516917776.703 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:56.874Z,1516917776.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:57.264Z,1516917777.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:57.667Z,1516917777.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:57.902Z,1516917777.902 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:02:57.903Z,1516917777.903 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:58.061Z,1516917778.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:58.457Z,1516917778.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:58.507Z,1516917778.507 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:02:58.508Z,1516917778.508 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:02:58.871Z,1516917778.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:59.266Z,1516917779.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:59.666Z,1516917779.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:02:59.710Z,1516917779.710 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:02:59.711Z,1516917779.711 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:00.070Z,1516917780.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:00.446Z,1516917780.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:00.855Z,1516917780.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:00.909Z,1516917780.909 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:00.910Z,1516917780.910 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:00.912Z,1516917780.912 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:01.259Z,1516917781.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:01.313Z,1516917781.313 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:01.511Z,1516917781.511 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:01.513Z,1516917781.513 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:01.651Z,1516917781.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:01.917Z,1516917781.917 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:02.048Z,1516917782.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:02.454Z,1516917782.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:02.715Z,1516917782.715 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:02.716Z,1516917782.716 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:02.717Z,1516917782.717 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:02.863Z,1516917782.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:03.121Z,1516917783.121 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:03.255Z,1516917783.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:03.658Z,1516917783.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:03.919Z,1516917783.919 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:03.920Z,1516917783.920 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:03.921Z,1516917783.921 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:04.048Z,1516917784.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:04.325Z,1516917784.325 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:04.458Z,1516917784.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:04.516Z,1516917784.516 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:04.518Z,1516917784.518 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:04.866Z,1516917784.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:05.262Z,1516917785.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:05.670Z,1516917785.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:05.718Z,1516917785.718 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:05.719Z,1516917785.719 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:06.061Z,1516917786.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:06.450Z,1516917786.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:06.861Z,1516917786.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:06.918Z,1516917786.918 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:06.919Z,1516917786.919 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:07.270Z,1516917787.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:07.521Z,1516917787.521 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:07.522Z,1516917787.522 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:07.659Z,1516917787.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:08.066Z,1516917788.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:08.467Z,1516917788.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:08.722Z,1516917788.722 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:08.723Z,1516917788.723 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:08.862Z,1516917788.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:09.268Z,1516917789.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:09.673Z,1516917789.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:09.922Z,1516917789.922 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:09.923Z,1516917789.923 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:10.060Z,1516917790.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:10.466Z,1516917790.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:10.526Z,1516917790.526 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:10.527Z,1516917790.527 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:10.850Z,1516917790.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:11.254Z,1516917791.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:11.648Z,1516917791.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:11.726Z,1516917791.726 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:11.727Z,1516917791.727 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:12.056Z,1516917792.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:12.455Z,1516917792.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:12.854Z,1516917792.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:12.926Z,1516917792.926 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:12.927Z,1516917792.927 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:13.248Z,1516917793.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:13.530Z,1516917793.530 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:13.531Z,1516917793.531 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:13.650Z,1516917793.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:14.056Z,1516917794.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:14.458Z,1516917794.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:14.730Z,1516917794.730 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:14.731Z,1516917794.731 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:14.847Z,1516917794.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:15.257Z,1516917795.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:15.929Z,1516917795.929 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:15.930Z,1516917795.930 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:15.932Z,1516917795.932 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:16.333Z,1516917796.333 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:16.535Z,1516917796.535 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:16.536Z,1516917796.536 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:16.941Z,1516917796.941 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:17.737Z,1516917797.737 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:17.738Z,1516917797.738 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:17.740Z,1516917797.740 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:18.141Z,1516917798.141 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:18.545Z,1516917798.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:18.681Z,1516917798.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:18.937Z,1516917798.937 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:18.938Z,1516917798.938 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:18.940Z,1516917798.940 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:19.022Z,1516917799.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:19.341Z,1516917799.341 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:19.422Z,1516917799.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:19.540Z,1516917799.540 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:19.541Z,1516917799.541 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:19.813Z,1516917799.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:19.945Z,1516917799.945 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:20.218Z,1516917800.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:20.622Z,1516917800.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:20.741Z,1516917800.741 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:20.742Z,1516917800.742 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:20.744Z,1516917800.744 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:21.014Z,1516917801.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:21.145Z,1516917801.145 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:21.411Z,1516917801.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:21.810Z,1516917801.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:21.941Z,1516917801.941 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:21.942Z,1516917801.942 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:21.943Z,1516917801.943 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:22.210Z,1516917802.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:22.345Z,1516917802.345 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:22.544Z,1516917802.544 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:22.545Z,1516917802.545 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:22.620Z,1516917802.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:22.949Z,1516917802.949 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:23.049Z,1516917803.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:23.419Z,1516917803.419 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:23.419Z,1516917803.419 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 15
2018-01-25T22:03:23.419Z,1516917803.419 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-25T22:03:23.421Z,1516917803.421 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:23.421Z,1516917803.421 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15
2018-01-25T22:03:23.421Z,1516917803.421 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-25T22:03:23.423Z,1516917803.423 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:23.423Z,1516917803.423 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2018-01-25T22:03:23.423Z,1516917803.423 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-25T22:03:23.435Z,1516917803.435 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-25T22:03:23.435Z,1516917803.435 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-25T22:03:23.435Z,1516917803.435 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-25T22:03:23.747Z,1516917803.747 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:23.748Z,1516917803.748 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:23.749Z,1516917803.749 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:23.854Z,1516917803.854 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-25T22:03:23.855Z,1516917803.855 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 15
2018-01-25T22:03:23.861Z,1516917803.861 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-25T22:03:23.862Z,1516917803.862 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15
2018-01-25T22:03:23.862Z,1516917803.862 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-25T22:03:23.862Z,1516917803.862 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2018-01-25T22:03:24.153Z,1516917804.153 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:24.196Z,1516917804.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-25T22:03:24.196Z,1516917804.196 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T22:03:24.205Z,1516917804.205 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T22:03:24.209Z,1516917804.209 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-25T22:03:24.209Z,1516917804.209 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T22:03:24.210Z,1516917804.210 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T22:03:24.210Z,1516917804.210 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-25T22:03:24.210Z,1516917804.210 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T22:03:24.211Z,1516917804.211 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T22:03:24.618Z,1516917804.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-25T22:03:24.619Z,1516917804.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:24.949Z,1516917804.949 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:24.950Z,1516917804.950 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:24.952Z,1516917804.952 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:25.013Z,1516917805.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-25T22:03:25.014Z,1516917805.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:25.353Z,1516917805.353 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:25.414Z,1516917805.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-25T22:03:25.415Z,1516917805.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:25.549Z,1516917805.549 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:25.550Z,1516917805.550 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:25.803Z,1516917805.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-25T22:03:25.804Z,1516917805.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:25.953Z,1516917805.953 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:26.207Z,1516917806.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-25T22:03:26.208Z,1516917806.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:26.614Z,1516917806.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-25T22:03:26.615Z,1516917806.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:26.749Z,1516917806.749 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:26.750Z,1516917806.750 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:26.752Z,1516917806.752 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:27.007Z,1516917807.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-25T22:03:27.008Z,1516917807.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:27.153Z,1516917807.153 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:27.410Z,1516917807.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-25T22:03:27.411Z,1516917807.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:27.810Z,1516917807.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-25T22:03:27.810Z,1516917807.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:27.949Z,1516917807.949 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:27.950Z,1516917807.950 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:27.951Z,1516917807.951 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:28.207Z,1516917808.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-25T22:03:28.208Z,1516917808.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:28.353Z,1516917808.353 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:28.553Z,1516917808.553 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:28.555Z,1516917808.555 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:28.619Z,1516917808.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-25T22:03:28.620Z,1516917808.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:28.957Z,1516917808.957 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:29.034Z,1516917809.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-25T22:03:29.035Z,1516917809.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:29.418Z,1516917809.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-25T22:03:29.419Z,1516917809.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:29.753Z,1516917809.753 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:29.754Z,1516917809.754 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:29.756Z,1516917809.756 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:29.840Z,1516917809.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-25T22:03:29.841Z,1516917809.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:30.157Z,1516917810.157 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:30.219Z,1516917810.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-25T22:03:30.220Z,1516917810.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:30.617Z,1516917810.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-25T22:03:30.618Z,1516917810.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:30.955Z,1516917810.955 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:30.956Z,1516917810.956 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:30.957Z,1516917810.957 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:31.030Z,1516917811.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-25T22:03:31.031Z,1516917811.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:31.369Z,1516917811.369 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:31.426Z,1516917811.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-25T22:03:31.427Z,1516917811.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:31.558Z,1516917811.558 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:31.559Z,1516917811.559 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:31.796Z,1516917811.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-25T22:03:31.797Z,1516917811.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:31.961Z,1516917811.961 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:32.228Z,1516917812.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-25T22:03:32.229Z,1516917812.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:32.629Z,1516917812.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-25T22:03:32.630Z,1516917812.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:32.759Z,1516917812.759 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:32.760Z,1516917812.760 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:32.761Z,1516917812.761 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:33.007Z,1516917813.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-25T22:03:33.008Z,1516917813.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:33.165Z,1516917813.165 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:33.406Z,1516917813.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-25T22:03:33.407Z,1516917813.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:33.805Z,1516917813.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-25T22:03:33.806Z,1516917813.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:33.961Z,1516917813.961 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:33.962Z,1516917813.962 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:33.963Z,1516917813.963 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:34.204Z,1516917814.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-25T22:03:34.209Z,1516917814.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:34.365Z,1516917814.365 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:34.578Z,1516917814.578 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:34.579Z,1516917814.579 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:34.611Z,1516917814.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-25T22:03:34.612Z,1516917814.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:34.981Z,1516917814.981 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:35.026Z,1516917815.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-25T22:03:35.027Z,1516917815.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:35.415Z,1516917815.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-25T22:03:35.416Z,1516917815.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:35.779Z,1516917815.779 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:35.783Z,1516917815.783 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:35.784Z,1516917815.784 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:35.840Z,1516917815.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-25T22:03:35.845Z,1516917815.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:36.185Z,1516917816.185 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:36.214Z,1516917816.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-25T22:03:36.215Z,1516917816.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:36.571Z,1516917816.571 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:36.573Z,1516917816.573 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:36.622Z,1516917816.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-25T22:03:36.623Z,1516917816.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:36.977Z,1516917816.977 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:37.022Z,1516917817.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-25T22:03:37.023Z,1516917817.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:37.402Z,1516917817.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-25T22:03:37.403Z,1516917817.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:37.774Z,1516917817.774 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:37.776Z,1516917817.776 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:37.777Z,1516917817.777 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:37.804Z,1516917817.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-25T22:03:37.809Z,1516917817.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:38.181Z,1516917818.181 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:38.214Z,1516917818.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-25T22:03:38.215Z,1516917818.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:38.571Z,1516917818.571 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:38.573Z,1516917818.573 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:38.629Z,1516917818.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-25T22:03:38.630Z,1516917818.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:38.983Z,1516917818.983 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:39.021Z,1516917819.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-25T22:03:39.022Z,1516917819.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:39.407Z,1516917819.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-25T22:03:39.408Z,1516917819.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:39.778Z,1516917819.778 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:39.778Z,1516917819.778 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:03:39.780Z,1516917819.780 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:39.818Z,1516917819.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-25T22:03:39.819Z,1516917819.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:40.182Z,1516917820.182 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:40.212Z,1516917820.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-25T22:03:40.213Z,1516917820.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:40.614Z,1516917820.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-25T22:03:40.615Z,1516917820.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:40.977Z,1516917820.977 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:40.978Z,1516917820.978 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:40.980Z,1516917820.980 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:41.034Z,1516917821.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-25T22:03:41.035Z,1516917821.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:41.381Z,1516917821.381 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:41.430Z,1516917821.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-25T22:03:41.431Z,1516917821.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:41.573Z,1516917821.573 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:41.575Z,1516917821.575 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:41.817Z,1516917821.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-25T22:03:41.818Z,1516917821.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:41.977Z,1516917821.977 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:42.218Z,1516917822.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-25T22:03:42.219Z,1516917822.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:42.613Z,1516917822.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-25T22:03:42.614Z,1516917822.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:42.773Z,1516917822.773 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:42.774Z,1516917822.774 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:42.776Z,1516917822.776 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:43.014Z,1516917823.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-25T22:03:43.015Z,1516917823.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:43.177Z,1516917823.177 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:43.417Z,1516917823.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-25T22:03:43.418Z,1516917823.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:43.815Z,1516917823.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:43.973Z,1516917823.973 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:43.974Z,1516917823.974 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:43.976Z,1516917823.976 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:44.218Z,1516917824.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:44.377Z,1516917824.377 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:44.578Z,1516917824.578 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:44.579Z,1516917824.579 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:44.650Z,1516917824.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:44.981Z,1516917824.981 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:45.026Z,1516917825.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:45.402Z,1516917825.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:45.778Z,1516917825.778 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:45.778Z,1516917825.778 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:45.780Z,1516917825.780 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:45.806Z,1516917825.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:46.182Z,1516917826.182 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:46.210Z,1516917826.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:46.631Z,1516917826.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:46.977Z,1516917826.977 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:46.978Z,1516917826.978 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:46.980Z,1516917826.980 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:47.016Z,1516917827.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:47.381Z,1516917827.381 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:47.411Z,1516917827.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:47.584Z,1516917827.584 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:47.585Z,1516917827.585 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:47.819Z,1516917827.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:47.989Z,1516917827.989 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:48.218Z,1516917828.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:48.618Z,1516917828.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:48.785Z,1516917828.785 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:48.786Z,1516917828.786 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:48.788Z,1516917828.788 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:49.017Z,1516917829.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:49.189Z,1516917829.189 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:49.412Z,1516917829.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:49.805Z,1516917829.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:49.985Z,1516917829.985 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:49.986Z,1516917829.986 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:49.988Z,1516917829.988 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:50.222Z,1516917830.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:50.389Z,1516917830.389 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:50.588Z,1516917830.588 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:50.589Z,1516917830.589 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:50.635Z,1516917830.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:50.995Z,1516917830.995 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:51.025Z,1516917831.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:51.414Z,1516917831.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:51.789Z,1516917831.789 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:51.790Z,1516917831.790 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:51.792Z,1516917831.792 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:51.814Z,1516917831.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:52.193Z,1516917832.193 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:52.199Z,1516917832.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:52.634Z,1516917832.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:52.989Z,1516917832.989 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:52.990Z,1516917832.990 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:52.992Z,1516917832.992 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:53.024Z,1516917833.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:53.394Z,1516917833.394 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:53.432Z,1516917833.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:53.592Z,1516917833.592 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:53.593Z,1516917833.593 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:53.838Z,1516917833.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:53.997Z,1516917833.997 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:54.204Z,1516917834.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:54.624Z,1516917834.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:54.793Z,1516917834.793 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:54.794Z,1516917834.794 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:54.796Z,1516917834.796 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:55.009Z,1516917835.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:55.197Z,1516917835.197 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:55.404Z,1516917835.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:55.804Z,1516917835.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:55.993Z,1516917835.993 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:55.994Z,1516917835.994 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:55.996Z,1516917835.996 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:56.212Z,1516917836.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:56.397Z,1516917836.397 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:56.599Z,1516917836.599 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:56.600Z,1516917836.600 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:56.625Z,1516917836.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:57.001Z,1516917837.001 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:57.015Z,1516917837.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:57.413Z,1516917837.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:57.797Z,1516917837.797 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:57.798Z,1516917837.798 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:57.800Z,1516917837.800 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:57.807Z,1516917837.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:58.201Z,1516917838.201 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:58.221Z,1516917838.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:58.625Z,1516917838.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:58.999Z,1516917838.999 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:59.000Z,1516917839.000 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:59.002Z,1516917839.002 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:59.017Z,1516917839.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:59.405Z,1516917839.405 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:03:59.430Z,1516917839.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:03:59.601Z,1516917839.601 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:03:59.602Z,1516917839.602 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:03:59.857Z,1516917839.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:00.005Z,1516917840.005 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:00.217Z,1516917840.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:00.618Z,1516917840.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:00.802Z,1516917840.802 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:00.803Z,1516917840.803 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:04:00.804Z,1516917840.804 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:01.017Z,1516917841.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:01.205Z,1516917841.205 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:01.417Z,1516917841.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:01.811Z,1516917841.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:02.001Z,1516917842.001 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:02.002Z,1516917842.002 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:04:02.004Z,1516917842.004 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:02.219Z,1516917842.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:02.405Z,1516917842.405 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:02.608Z,1516917842.608 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:04:02.609Z,1516917842.609 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:02.658Z,1516917842.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:03.013Z,1516917843.013 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:03.026Z,1516917843.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:03.418Z,1516917843.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:03.802Z,1516917843.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:03.813Z,1516917843.813 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:03.814Z,1516917843.814 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:04:03.816Z,1516917843.816 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:04.217Z,1516917844.217 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:04.226Z,1516917844.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:04.631Z,1516917844.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:05.011Z,1516917845.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:05.013Z,1516917845.013 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:05.014Z,1516917845.014 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:04:05.015Z,1516917845.015 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:05.411Z,1516917845.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:05.417Z,1516917845.417 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:05.610Z,1516917845.610 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:04:05.612Z,1516917845.612 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:05.839Z,1516917845.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:06.013Z,1516917846.013 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:06.203Z,1516917846.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:06.604Z,1516917846.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:06.809Z,1516917846.809 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:06.810Z,1516917846.810 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:04:06.812Z,1516917846.812 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:07.006Z,1516917847.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:07.213Z,1516917847.213 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:07.397Z,1516917847.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:07.810Z,1516917847.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:08.009Z,1516917848.009 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:08.010Z,1516917848.010 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:04:08.012Z,1516917848.012 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:08.218Z,1516917848.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:08.413Z,1516917848.413 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:08.625Z,1516917848.625 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:04:08.626Z,1516917848.626 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:08.637Z,1516917848.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:09.015Z,1516917849.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:09.029Z,1516917849.029 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:09.418Z,1516917849.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:09.824Z,1516917849.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:09.825Z,1516917849.825 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:09.826Z,1516917849.826 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:04:09.828Z,1516917849.828 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:10.198Z,1516917850.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:10.229Z,1516917850.229 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:10.620Z,1516917850.620 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:04:10.621Z,1516917850.621 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:10.627Z,1516917850.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:11.025Z,1516917851.025 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:11.035Z,1516917851.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:11.427Z,1516917851.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:11.821Z,1516917851.821 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:11.822Z,1516917851.822 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:04:11.824Z,1516917851.824 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:11.838Z,1516917851.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:12.204Z,1516917852.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:12.225Z,1516917852.225 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:12.638Z,1516917852.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:13.007Z,1516917853.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:13.029Z,1516917853.029 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:13.030Z,1516917853.030 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:04:13.032Z,1516917853.032 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:13.422Z,1516917853.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:13.433Z,1516917853.433 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:13.623Z,1516917853.623 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:04:13.624Z,1516917853.624 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:13.818Z,1516917853.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:14.025Z,1516917854.025 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:14.205Z,1516917854.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:14.635Z,1516917854.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:14.639Z,1516917854.639 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-25T22:04:14.639Z,1516917854.639 [Default:CheckIn:C.Wait] Stopped
2018-01-25T22:04:14.639Z,1516917854.639 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-25T22:04:14.639Z,1516917854.639 [Default:CheckIn:D] Running Loop=1
2018-01-25T22:04:14.821Z,1516917854.821 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:14.822Z,1516917854.822 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:04:14.824Z,1516917854.824 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:15.022Z,1516917855.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:15.025Z,1516917855.025 [Default:CheckIn:D] Stopped
2018-01-25T22:04:15.025Z,1516917855.025 [Default:CheckIn:E] Running Loop=1
2018-01-25T22:04:15.225Z,1516917855.225 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:15.419Z,1516917855.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:15.422Z,1516917855.422 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 41.936316 min 
2018-01-25T22:04:15.423Z,1516917855.423 [Default:CheckIn:E] Stopped
2018-01-25T22:04:15.423Z,1516917855.423 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-25T22:04:15.423Z,1516917855.423 [Default:CheckIn] Stopped
2018-01-25T22:04:15.423Z,1516917855.423 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-25T22:04:15.423Z,1516917855.423 [Default:CheckIn](INFO): Running loop #5
2018-01-25T22:04:15.423Z,1516917855.423 [Default:CheckIn] Running Loop=5
2018-01-25T22:04:15.423Z,1516917855.423 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-25T22:04:15.423Z,1516917855.423 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-25T22:04:16.021Z,1516917856.021 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:16.022Z,1516917856.022 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:04:16.023Z,1516917856.023 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:16.425Z,1516917856.425 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:16.628Z,1516917856.628 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:04:16.629Z,1516917856.629 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:17.033Z,1516917857.033 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:17.829Z,1516917857.829 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:17.830Z,1516917857.830 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:04:17.832Z,1516917857.832 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:18.233Z,1516917858.233 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:18.684Z,1516917858.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:18.793Z,1516917858.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:19.029Z,1516917859.029 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:19.030Z,1516917859.030 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:04:19.032Z,1516917859.032 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:19.178Z,1516917859.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:19.433Z,1516917859.433 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:19.586Z,1516917859.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:19.632Z,1516917859.632 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:04:19.634Z,1516917859.634 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:19.986Z,1516917859.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:20.037Z,1516917860.037 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:20.395Z,1516917860.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:20.798Z,1516917860.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:20.833Z,1516917860.833 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:20.834Z,1516917860.834 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:04:20.836Z,1516917860.836 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:21.184Z,1516917861.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:21.237Z,1516917861.237 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:21.574Z,1516917861.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:22.005Z,1516917862.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:22.053Z,1516917862.053 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:22.054Z,1516917862.054 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:04:22.055Z,1516917862.055 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:22.384Z,1516917862.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:22.457Z,1516917862.457 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:22.641Z,1516917862.641 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:04:22.643Z,1516917862.643 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:22.782Z,1516917862.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:23.045Z,1516917863.045 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:23.196Z,1516917863.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:23.575Z,1516917863.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:23.843Z,1516917863.843 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:23.844Z,1516917863.844 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:04:23.845Z,1516917863.845 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:24.009Z,1516917864.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:24.249Z,1516917864.249 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:24.386Z,1516917864.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:24.640Z,1516917864.640 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:04:24.641Z,1516917864.641 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:24.790Z,1516917864.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:25.045Z,1516917865.045 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:25.183Z,1516917865.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:25.580Z,1516917865.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:25.841Z,1516917865.841 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:25.842Z,1516917865.842 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:04:25.844Z,1516917865.844 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:25.997Z,1516917865.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:26.245Z,1516917866.245 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:26.394Z,1516917866.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:26.784Z,1516917866.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:27.041Z,1516917867.041 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:27.042Z,1516917867.042 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:04:27.044Z,1516917867.044 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:27.184Z,1516917867.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:27.445Z,1516917867.445 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:27.585Z,1516917867.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:27.672Z,1516917867.672 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:04:27.674Z,1516917867.674 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:27.996Z,1516917867.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:28.077Z,1516917868.077 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:28.387Z,1516917868.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:28.790Z,1516917868.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:28.873Z,1516917868.873 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:28.874Z,1516917868.874 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:04:28.876Z,1516917868.876 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:29.186Z,1516917869.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:29.277Z,1516917869.277 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:29.586Z,1516917869.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:29.648Z,1516917869.648 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:04:29.650Z,1516917869.650 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:29.983Z,1516917869.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:30.053Z,1516917870.053 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:30.386Z,1516917870.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:30.793Z,1516917870.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:30.849Z,1516917870.849 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:30.850Z,1516917870.850 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:04:30.852Z,1516917870.852 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:31.195Z,1516917871.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:31.253Z,1516917871.253 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:31.591Z,1516917871.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:31.986Z,1516917871.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:32.049Z,1516917872.049 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:32.050Z,1516917872.050 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:04:32.052Z,1516917872.052 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:32.392Z,1516917872.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:32.453Z,1516917872.453 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:32.652Z,1516917872.652 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:04:32.654Z,1516917872.654 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:32.797Z,1516917872.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:33.057Z,1516917873.057 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:33.194Z,1516917873.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:33.588Z,1516917873.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:33.853Z,1516917873.853 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:33.854Z,1516917873.854 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:04:33.856Z,1516917873.856 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:34.010Z,1516917874.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:34.257Z,1516917874.257 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:34.394Z,1516917874.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:34.769Z,1516917874.769 [PNI_TCM](ERROR): CRC does not match. Expected:0x24356 got:0x36321
2018-01-25T22:04:34.798Z,1516917874.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:35.053Z,1516917875.053 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:35.054Z,1516917875.054 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:04:35.055Z,1516917875.055 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:35.178Z,1516917875.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:35.457Z,1516917875.457 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:35.588Z,1516917875.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:35.657Z,1516917875.657 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:04:35.658Z,1516917875.658 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:35.989Z,1516917875.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:36.061Z,1516917876.061 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:36.400Z,1516917876.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:36.798Z,1516917876.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:36.857Z,1516917876.857 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:36.858Z,1516917876.858 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:04:36.860Z,1516917876.860 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:37.196Z,1516917877.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:37.261Z,1516917877.261 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:37.585Z,1516917877.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:37.983Z,1516917877.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:38.057Z,1516917878.057 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:38.058Z,1516917878.058 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:04:38.060Z,1516917878.060 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:38.381Z,1516917878.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:38.461Z,1516917878.461 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:38.663Z,1516917878.663 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:04:38.664Z,1516917878.664 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:38.796Z,1516917878.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:39.069Z,1516917879.069 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:39.193Z,1516917879.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:39.596Z,1516917879.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:39.865Z,1516917879.865 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:39.866Z,1516917879.866 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:04:39.868Z,1516917879.868 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:40.005Z,1516917880.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:40.271Z,1516917880.271 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:40.393Z,1516917880.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:40.764Z,1516917880.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:41.065Z,1516917881.065 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:41.066Z,1516917881.066 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:04:41.067Z,1516917881.067 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:41.170Z,1516917881.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:41.469Z,1516917881.469 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:41.573Z,1516917881.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:41.666Z,1516917881.666 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:04:41.667Z,1516917881.667 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:42.010Z,1516917882.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:42.069Z,1516917882.069 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:42.400Z,1516917882.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:42.803Z,1516917882.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:42.865Z,1516917882.865 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:42.866Z,1516917882.866 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:04:42.868Z,1516917882.868 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:43.182Z,1516917883.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:43.269Z,1516917883.269 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:43.583Z,1516917883.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:43.972Z,1516917883.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:44.065Z,1516917884.065 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:44.066Z,1516917884.066 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:04:44.068Z,1516917884.068 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:44.389Z,1516917884.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:44.469Z,1516917884.469 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:44.671Z,1516917884.671 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:04:44.672Z,1516917884.672 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:44.785Z,1516917884.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:45.073Z,1516917885.073 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:45.206Z,1516917885.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:45.635Z,1516917885.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:45.869Z,1516917885.869 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:45.870Z,1516917885.870 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:04:45.872Z,1516917885.872 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:46.010Z,1516917886.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:46.273Z,1516917886.273 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:46.414Z,1516917886.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:46.820Z,1516917886.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:47.071Z,1516917887.071 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:47.072Z,1516917887.072 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:04:47.073Z,1516917887.073 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:47.245Z,1516917887.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:47.477Z,1516917887.477 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:47.625Z,1516917887.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:47.675Z,1516917887.675 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:04:47.677Z,1516917887.677 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:47.991Z,1516917887.991 [PNI_TCM](ERROR): CRC does not match. Expected:0x30263 got:0x33542
2018-01-25T22:04:48.026Z,1516917888.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:48.081Z,1516917888.081 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:48.426Z,1516917888.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:48.811Z,1516917888.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:48.878Z,1516917888.878 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:48.879Z,1516917888.879 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:04:48.880Z,1516917888.880 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:49.191Z,1516917889.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:49.281Z,1516917889.281 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:49.617Z,1516917889.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:49.970Z,1516917889.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:50.078Z,1516917890.078 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:50.079Z,1516917890.079 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:04:50.081Z,1516917890.081 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:50.398Z,1516917890.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:50.485Z,1516917890.485 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:50.680Z,1516917890.680 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:04:50.681Z,1516917890.681 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:50.830Z,1516917890.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:51.085Z,1516917891.085 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:51.200Z,1516917891.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:51.623Z,1516917891.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:51.882Z,1516917891.882 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:51.883Z,1516917891.883 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:04:51.884Z,1516917891.884 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:52.036Z,1516917892.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:52.285Z,1516917892.285 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:52.412Z,1516917892.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:52.810Z,1516917892.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:53.081Z,1516917893.081 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:53.082Z,1516917893.082 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:04:53.084Z,1516917893.084 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:53.223Z,1516917893.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:53.486Z,1516917893.486 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:53.629Z,1516917893.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:53.685Z,1516917893.685 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:04:53.686Z,1516917893.686 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:54.006Z,1516917894.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:54.089Z,1516917894.089 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:54.422Z,1516917894.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:54.811Z,1516917894.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:54.886Z,1516917894.886 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:54.886Z,1516917894.886 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:04:54.888Z,1516917894.888 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:55.182Z,1516917895.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:55.289Z,1516917895.289 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:55.606Z,1516917895.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:56.010Z,1516917896.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:56.085Z,1516917896.085 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:56.086Z,1516917896.086 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:04:56.088Z,1516917896.088 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:56.417Z,1516917896.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:56.490Z,1516917896.490 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:56.691Z,1516917896.691 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:04:56.692Z,1516917896.692 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:56.829Z,1516917896.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:57.097Z,1516917897.097 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:57.242Z,1516917897.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:57.615Z,1516917897.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:57.893Z,1516917897.893 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:57.894Z,1516917897.894 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:04:57.896Z,1516917897.896 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:57.994Z,1516917897.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:58.297Z,1516917898.297 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:58.379Z,1516917898.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:58.783Z,1516917898.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:59.093Z,1516917899.093 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:59.094Z,1516917899.094 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:04:59.095Z,1516917899.095 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:59.199Z,1516917899.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:59.497Z,1516917899.497 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:04:59.606Z,1516917899.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:04:59.695Z,1516917899.695 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:04:59.696Z,1516917899.696 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:04:59.984Z,1516917899.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:00.097Z,1516917900.097 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:00.384Z,1516917900.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:00.788Z,1516917900.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:00.894Z,1516917900.894 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:00.895Z,1516917900.895 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:05:00.896Z,1516917900.896 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:01.183Z,1516917901.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:01.301Z,1516917901.301 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:01.585Z,1516917901.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:01.983Z,1516917901.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:02.097Z,1516917902.097 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:02.098Z,1516917902.098 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:05:02.099Z,1516917902.099 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:02.398Z,1516917902.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:02.501Z,1516917902.501 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:02.698Z,1516917902.698 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:05:02.700Z,1516917902.700 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:02.787Z,1516917902.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:03.101Z,1516917903.101 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:03.184Z,1516917903.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:03.583Z,1516917903.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:03.897Z,1516917903.897 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:03.898Z,1516917903.898 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:05:03.900Z,1516917903.900 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:03.979Z,1516917903.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:04.301Z,1516917904.301 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:04.390Z,1516917904.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:04.765Z,1516917904.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:05.097Z,1516917905.097 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:05.098Z,1516917905.098 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:05:05.100Z,1516917905.100 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:05.182Z,1516917905.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:05.501Z,1516917905.501 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:05.603Z,1516917905.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:05.703Z,1516917905.703 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:05:05.705Z,1516917905.705 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:05.979Z,1516917905.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:06.109Z,1516917906.109 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:06.371Z,1516917906.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:06.768Z,1516917906.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:06.905Z,1516917906.905 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:06.906Z,1516917906.906 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:05:06.908Z,1516917906.908 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:07.183Z,1516917907.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:07.309Z,1516917907.309 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:07.578Z,1516917907.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:07.972Z,1516917907.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:08.105Z,1516917908.105 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:08.106Z,1516917908.106 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:05:08.108Z,1516917908.108 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:08.380Z,1516917908.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:08.509Z,1516917908.509 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:08.708Z,1516917908.708 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:05:08.709Z,1516917908.709 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:08.790Z,1516917908.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:09.113Z,1516917909.113 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:09.188Z,1516917909.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:09.573Z,1516917909.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:09.911Z,1516917909.911 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:09.912Z,1516917909.912 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:05:09.913Z,1516917909.913 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:09.991Z,1516917909.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:10.317Z,1516917910.317 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:10.385Z,1516917910.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:10.785Z,1516917910.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:11.115Z,1516917911.115 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:11.116Z,1516917911.116 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:05:11.117Z,1516917911.117 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:11.206Z,1516917911.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:11.521Z,1516917911.521 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:11.599Z,1516917911.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:11.712Z,1516917911.712 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:05:11.714Z,1516917911.714 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:11.988Z,1516917911.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:12.119Z,1516917912.119 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:12.392Z,1516917912.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:12.765Z,1516917912.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:12.913Z,1516917912.913 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:12.914Z,1516917912.914 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:05:12.916Z,1516917912.916 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:13.192Z,1516917913.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:13.317Z,1516917913.317 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:13.566Z,1516917913.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:13.970Z,1516917913.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:14.113Z,1516917914.113 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:14.114Z,1516917914.114 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:05:14.116Z,1516917914.116 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:14.395Z,1516917914.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:14.517Z,1516917914.517 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:14.717Z,1516917914.717 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:05:14.718Z,1516917914.718 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:14.798Z,1516917914.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:15.121Z,1516917915.121 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:15.180Z,1516917915.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:15.584Z,1516917915.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:15.917Z,1516917915.917 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:15.918Z,1516917915.918 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:05:15.919Z,1516917915.920 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:16.321Z,1516917916.321 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:17.117Z,1516917917.117 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:17.118Z,1516917917.118 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:05:17.119Z,1516917917.119 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:17.521Z,1516917917.521 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:17.722Z,1516917917.722 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:05:17.723Z,1516917917.723 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:18.125Z,1516917918.125 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:18.867Z,1516917918.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:18.921Z,1516917918.921 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:18.922Z,1516917918.922 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:05:18.924Z,1516917918.924 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:19.014Z,1516917919.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:19.325Z,1516917919.325 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:19.342Z,1516917919.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:19.747Z,1516917919.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:20.121Z,1516917920.121 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:20.122Z,1516917920.122 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:05:20.124Z,1516917920.124 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:20.136Z,1516917920.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:20.525Z,1516917920.525 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:20.532Z,1516917920.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:20.726Z,1516917920.726 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:05:20.728Z,1516917920.728 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:20.936Z,1516917920.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:21.129Z,1516917921.129 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:21.331Z,1516917921.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:21.741Z,1516917921.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:21.925Z,1516917921.925 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:21.926Z,1516917921.926 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:05:21.928Z,1516917921.928 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:22.143Z,1516917922.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:22.329Z,1516917922.329 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:22.542Z,1516917922.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:22.937Z,1516917922.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:23.126Z,1516917923.126 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:23.127Z,1516917923.127 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:05:23.128Z,1516917923.128 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:23.339Z,1516917923.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:23.529Z,1516917923.529 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:23.731Z,1516917923.731 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:05:23.732Z,1516917923.732 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:23.754Z,1516917923.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:24.128Z,1516917924.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:24.137Z,1516917924.137 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:24.574Z,1516917924.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:24.928Z,1516917924.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:24.933Z,1516917924.933 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:24.934Z,1516917924.934 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:05:24.936Z,1516917924.936 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:25.337Z,1516917925.337 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:25.344Z,1516917925.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:25.764Z,1516917925.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:26.133Z,1516917926.133 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:26.134Z,1516917926.134 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010804 psu
2018-01-25T22:05:26.135Z,1516917926.135 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:26.143Z,1516917926.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:26.537Z,1516917926.537 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:26.550Z,1516917926.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:26.736Z,1516917926.736 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:05:26.737Z,1516917926.737 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:26.930Z,1516917926.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:27.143Z,1516917927.143 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:27.330Z,1516917927.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:27.759Z,1516917927.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:27.937Z,1516917927.937 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:27.938Z,1516917927.938 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:05:27.940Z,1516917927.940 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:28.144Z,1516917928.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:28.341Z,1516917928.341 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:28.535Z,1516917928.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:28.951Z,1516917928.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:29.137Z,1516917929.137 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:29.138Z,1516917929.138 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:05:29.140Z,1516917929.140 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:29.325Z,1516917929.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:29.541Z,1516917929.541 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:29.740Z,1516917929.740 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:05:29.742Z,1516917929.742 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:29.747Z,1516917929.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:30.126Z,1516917930.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:30.145Z,1516917930.145 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:30.525Z,1516917930.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:30.926Z,1516917930.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:30.941Z,1516917930.941 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:30.942Z,1516917930.942 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:05:30.944Z,1516917930.944 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:31.336Z,1516917931.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:31.345Z,1516917931.345 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:31.764Z,1516917931.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:32.135Z,1516917932.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:32.141Z,1516917932.141 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:32.142Z,1516917932.142 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:05:32.144Z,1516917932.144 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:32.530Z,1516917932.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:32.545Z,1516917932.545 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:32.745Z,1516917932.745 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:05:32.746Z,1516917932.746 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:32.926Z,1516917932.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:33.149Z,1516917933.149 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:33.326Z,1516917933.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:33.736Z,1516917933.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:33.945Z,1516917933.945 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:33.946Z,1516917933.946 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:05:33.948Z,1516917933.948 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:34.136Z,1516917934.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:34.349Z,1516917934.349 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:34.593Z,1516917934.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:34.946Z,1516917934.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:35.145Z,1516917935.145 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:35.146Z,1516917935.146 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:05:35.148Z,1516917935.148 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:35.334Z,1516917935.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:35.549Z,1516917935.549 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:35.750Z,1516917935.750 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:05:35.751Z,1516917935.751 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:35.759Z,1516917935.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:36.149Z,1516917936.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:36.153Z,1516917936.153 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:36.558Z,1516917936.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:36.949Z,1516917936.949 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:36.950Z,1516917936.950 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:05:36.952Z,1516917936.952 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:36.955Z,1516917936.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:37.329Z,1516917937.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:37.353Z,1516917937.353 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:37.759Z,1516917937.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:38.131Z,1516917938.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:38.149Z,1516917938.149 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:38.150Z,1516917938.150 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:05:38.152Z,1516917938.152 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:38.539Z,1516917938.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:38.553Z,1516917938.553 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:38.754Z,1516917938.754 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:05:38.756Z,1516917938.756 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:38.936Z,1516917938.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:39.157Z,1516917939.157 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:39.332Z,1516917939.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:39.773Z,1516917939.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:39.955Z,1516917939.955 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:39.956Z,1516917939.956 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:05:39.957Z,1516917939.957 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:40.148Z,1516917940.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:40.361Z,1516917940.361 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:40.630Z,1516917940.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:40.940Z,1516917940.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:41.159Z,1516917941.159 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:41.160Z,1516917941.160 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:05:41.161Z,1516917941.161 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:41.334Z,1516917941.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:41.565Z,1516917941.565 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:41.759Z,1516917941.759 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:05:41.760Z,1516917941.760 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:41.762Z,1516917941.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:42.142Z,1516917942.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:42.161Z,1516917942.161 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:42.544Z,1516917942.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:42.945Z,1516917942.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:42.957Z,1516917942.957 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:42.958Z,1516917942.958 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:05:42.960Z,1516917942.960 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:43.340Z,1516917943.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:43.361Z,1516917943.361 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:43.768Z,1516917943.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:44.140Z,1516917944.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:44.157Z,1516917944.157 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:44.158Z,1516917944.158 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:05:44.160Z,1516917944.160 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:44.555Z,1516917944.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:44.561Z,1516917944.561 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:44.763Z,1516917944.763 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:05:44.765Z,1516917944.765 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:44.943Z,1516917944.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:45.169Z,1516917945.169 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:45.347Z,1516917945.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:45.759Z,1516917945.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:45.965Z,1516917945.965 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:45.966Z,1516917945.966 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:05:45.968Z,1516917945.968 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:46.158Z,1516917946.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:46.369Z,1516917946.369 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:46.545Z,1516917946.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:46.947Z,1516917946.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:47.165Z,1516917947.165 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:47.166Z,1516917947.166 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:05:47.168Z,1516917947.168 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:47.326Z,1516917947.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:47.569Z,1516917947.569 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:47.768Z,1516917947.768 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:05:47.771Z,1516917947.771 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:47.778Z,1516917947.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:48.159Z,1516917948.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:48.173Z,1516917948.173 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:48.536Z,1516917948.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:48.931Z,1516917948.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:48.969Z,1516917948.969 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:48.970Z,1516917948.970 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:05:48.972Z,1516917948.972 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:49.338Z,1516917949.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:49.373Z,1516917949.373 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:49.734Z,1516917949.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:50.142Z,1516917950.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:50.169Z,1516917950.169 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:50.170Z,1516917950.170 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:05:50.172Z,1516917950.172 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:50.540Z,1516917950.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:50.573Z,1516917950.573 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:50.773Z,1516917950.773 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:05:50.774Z,1516917950.774 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:50.944Z,1516917950.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:51.177Z,1516917951.177 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:51.342Z,1516917951.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:51.727Z,1516917951.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:51.973Z,1516917951.973 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:51.974Z,1516917951.974 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:05:51.976Z,1516917951.976 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:52.138Z,1516917952.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:52.377Z,1516917952.377 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:52.542Z,1516917952.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:52.943Z,1516917952.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:53.173Z,1516917953.173 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:53.174Z,1516917953.174 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:05:53.176Z,1516917953.176 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:53.338Z,1516917953.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:53.577Z,1516917953.577 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:53.731Z,1516917953.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:53.805Z,1516917953.805 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:05:53.807Z,1516917953.807 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:54.146Z,1516917954.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:54.209Z,1516917954.209 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:54.554Z,1516917954.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:54.945Z,1516917954.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:55.005Z,1516917955.005 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:55.006Z,1516917955.006 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:05:55.008Z,1516917955.008 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:55.333Z,1516917955.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:55.409Z,1516917955.409 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:55.744Z,1516917955.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:55.781Z,1516917955.781 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:05:55.782Z,1516917955.782 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:56.147Z,1516917956.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:56.185Z,1516917956.185 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:56.549Z,1516917956.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:56.950Z,1516917956.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:56.981Z,1516917956.981 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:56.982Z,1516917956.982 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:05:56.984Z,1516917956.984 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:57.339Z,1516917957.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:57.385Z,1516917957.385 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:57.739Z,1516917957.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:58.146Z,1516917958.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:58.181Z,1516917958.181 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:58.182Z,1516917958.182 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:05:58.184Z,1516917958.184 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:58.543Z,1516917958.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:58.585Z,1516917958.585 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:58.785Z,1516917958.785 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:05:58.786Z,1516917958.786 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:05:58.958Z,1516917958.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:59.189Z,1516917959.189 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:59.349Z,1516917959.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:59.746Z,1516917959.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:05:59.985Z,1516917959.985 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:05:59.986Z,1516917959.986 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:05:59.988Z,1516917959.988 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:00.145Z,1516917960.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:00.389Z,1516917960.389 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:00.560Z,1516917960.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:00.946Z,1516917960.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:01.185Z,1516917961.185 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:01.186Z,1516917961.186 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:06:01.188Z,1516917961.188 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:01.350Z,1516917961.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:01.589Z,1516917961.589 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:01.734Z,1516917961.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:01.790Z,1516917961.790 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:06:01.791Z,1516917961.791 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:02.143Z,1516917962.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:02.193Z,1516917962.193 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:02.544Z,1516917962.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:02.950Z,1516917962.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:02.989Z,1516917962.989 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:02.990Z,1516917962.990 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:06:02.992Z,1516917962.992 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:03.336Z,1516917963.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:03.393Z,1516917963.393 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:03.746Z,1516917963.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:04.148Z,1516917964.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:04.189Z,1516917964.189 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:04.190Z,1516917964.190 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:06:04.192Z,1516917964.192 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:04.543Z,1516917964.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:04.593Z,1516917964.593 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:04.794Z,1516917964.794 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:06:04.796Z,1516917964.796 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:04.947Z,1516917964.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:05.197Z,1516917965.197 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:05.342Z,1516917965.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:05.726Z,1516917965.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:05.993Z,1516917965.993 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:05.994Z,1516917965.994 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:06:05.996Z,1516917965.996 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:06.158Z,1516917966.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:06.397Z,1516917966.397 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:06.552Z,1516917966.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:06.958Z,1516917966.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:07.193Z,1516917967.193 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:07.194Z,1516917967.194 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:06:07.196Z,1516917967.196 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:07.356Z,1516917967.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:07.597Z,1516917967.597 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:07.754Z,1516917967.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:07.799Z,1516917967.799 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:06:07.800Z,1516917967.800 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:08.139Z,1516917968.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:08.205Z,1516917968.205 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:08.540Z,1516917968.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:08.944Z,1516917968.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:09.001Z,1516917969.001 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:09.002Z,1516917969.002 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:06:09.004Z,1516917969.004 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:09.334Z,1516917969.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:09.405Z,1516917969.405 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:09.735Z,1516917969.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:10.149Z,1516917970.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:10.201Z,1516917970.201 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:10.202Z,1516917970.202 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:06:10.203Z,1516917970.203 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:10.546Z,1516917970.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:10.605Z,1516917970.605 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:10.804Z,1516917970.804 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:06:10.805Z,1516917970.805 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:10.956Z,1516917970.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:11.209Z,1516917971.209 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:11.346Z,1516917971.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:11.746Z,1516917971.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:12.005Z,1516917972.005 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:12.006Z,1516917972.006 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:06:12.008Z,1516917972.008 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:12.140Z,1516917972.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:12.409Z,1516917972.409 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:12.540Z,1516917972.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:12.933Z,1516917972.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:13.205Z,1516917973.205 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:13.206Z,1516917973.206 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:06:13.208Z,1516917973.208 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:13.350Z,1516917973.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:13.609Z,1516917973.609 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:13.744Z,1516917973.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:13.808Z,1516917973.808 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:06:13.810Z,1516917973.810 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:14.142Z,1516917974.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:14.213Z,1516917974.213 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:14.533Z,1516917974.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:14.946Z,1516917974.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:15.009Z,1516917975.009 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:15.010Z,1516917975.010 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:06:15.012Z,1516917975.012 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:15.346Z,1516917975.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:15.413Z,1516917975.413 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:15.741Z,1516917975.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:16.209Z,1516917976.209 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:16.210Z,1516917976.210 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:06:16.212Z,1516917976.212 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:16.613Z,1516917976.613 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:16.813Z,1516917976.813 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:06:16.814Z,1516917976.814 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:17.217Z,1516917977.217 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:18.013Z,1516917978.013 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:18.014Z,1516917978.014 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:06:18.016Z,1516917978.016 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:18.417Z,1516917978.417 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:19.013Z,1516917979.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:19.160Z,1516917979.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:19.213Z,1516917979.213 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:19.214Z,1516917979.214 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:06:19.216Z,1516917979.216 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:19.479Z,1516917979.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:19.617Z,1516917979.617 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:19.818Z,1516917979.818 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:06:19.819Z,1516917979.819 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:19.902Z,1516917979.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:20.221Z,1516917980.221 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:20.283Z,1516917980.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:20.682Z,1516917980.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:21.017Z,1516917981.017 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:21.018Z,1516917981.018 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:06:21.020Z,1516917981.020 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:21.098Z,1516917981.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:21.421Z,1516917981.421 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:21.487Z,1516917981.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:21.891Z,1516917981.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:22.218Z,1516917982.218 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:22.219Z,1516917982.219 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:06:22.220Z,1516917982.220 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:22.296Z,1516917982.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:22.621Z,1516917982.621 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:22.685Z,1516917982.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:22.822Z,1516917982.822 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:06:22.823Z,1516917982.823 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:23.082Z,1516917983.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:23.225Z,1516917983.225 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:23.485Z,1516917983.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:23.883Z,1516917983.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:24.021Z,1516917984.021 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:24.022Z,1516917984.022 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:06:24.024Z,1516917984.024 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:24.289Z,1516917984.289 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:24.290Z,1516917984.290 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 16
2018-01-25T22:06:24.290Z,1516917984.290 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-25T22:06:24.291Z,1516917984.291 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:24.291Z,1516917984.291 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16
2018-01-25T22:06:24.292Z,1516917984.292 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-25T22:06:24.293Z,1516917984.293 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:24.294Z,1516917984.294 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2018-01-25T22:06:24.294Z,1516917984.294 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-25T22:06:24.305Z,1516917984.305 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-25T22:06:24.306Z,1516917984.306 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-25T22:06:24.306Z,1516917984.306 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-25T22:06:24.425Z,1516917984.425 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:24.701Z,1516917984.701 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-25T22:06:24.702Z,1516917984.702 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 16
2018-01-25T22:06:24.702Z,1516917984.702 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-25T22:06:24.702Z,1516917984.702 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16
2018-01-25T22:06:24.703Z,1516917984.703 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-25T22:06:24.703Z,1516917984.703 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2018-01-25T22:06:25.082Z,1516917985.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-25T22:06:25.083Z,1516917985.083 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T22:06:25.083Z,1516917985.083 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T22:06:25.083Z,1516917985.083 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-25T22:06:25.084Z,1516917985.084 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T22:06:25.084Z,1516917985.084 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T22:06:25.085Z,1516917985.085 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-25T22:06:25.085Z,1516917985.085 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T22:06:25.085Z,1516917985.085 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T22:06:25.221Z,1516917985.221 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:25.222Z,1516917985.222 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010803 psu
2018-01-25T22:06:25.224Z,1516917985.224 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:25.494Z,1516917985.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-25T22:06:25.495Z,1516917985.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:25.625Z,1516917985.625 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:25.827Z,1516917985.827 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:06:25.828Z,1516917985.828 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:25.879Z,1516917985.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-25T22:06:25.879Z,1516917985.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:26.229Z,1516917986.229 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:26.285Z,1516917986.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-25T22:06:26.286Z,1516917986.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:26.675Z,1516917986.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-25T22:06:26.676Z,1516917986.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:27.025Z,1516917987.025 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:27.026Z,1516917987.026 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:06:27.028Z,1516917987.028 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:27.086Z,1516917987.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-25T22:06:27.087Z,1516917987.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:27.429Z,1516917987.429 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:27.489Z,1516917987.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-25T22:06:27.490Z,1516917987.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:27.889Z,1516917987.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-25T22:06:27.890Z,1516917987.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:28.225Z,1516917988.225 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:28.226Z,1516917988.226 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:06:28.228Z,1516917988.228 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:28.301Z,1516917988.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-25T22:06:28.302Z,1516917988.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:28.629Z,1516917988.629 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:28.688Z,1516917988.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-25T22:06:28.689Z,1516917988.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:28.831Z,1516917988.831 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:06:28.833Z,1516917988.833 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:29.086Z,1516917989.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-25T22:06:29.087Z,1516917989.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:29.237Z,1516917989.237 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:29.490Z,1516917989.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-25T22:06:29.491Z,1516917989.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:29.871Z,1516917989.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-25T22:06:29.872Z,1516917989.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:30.033Z,1516917990.033 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:30.034Z,1516917990.034 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:06:30.036Z,1516917990.036 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:30.291Z,1516917990.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-25T22:06:30.292Z,1516917990.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:30.437Z,1516917990.437 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:30.699Z,1516917990.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-25T22:06:30.700Z,1516917990.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:31.079Z,1516917991.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-25T22:06:31.080Z,1516917991.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:31.233Z,1516917991.233 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:31.234Z,1516917991.234 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:06:31.236Z,1516917991.236 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:31.485Z,1516917991.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-25T22:06:31.486Z,1516917991.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:31.637Z,1516917991.637 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:31.839Z,1516917991.839 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:06:31.854Z,1516917991.854 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:31.884Z,1516917991.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-25T22:06:31.889Z,1516917991.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:32.257Z,1516917992.257 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:32.286Z,1516917992.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-25T22:06:32.287Z,1516917992.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:32.678Z,1516917992.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-25T22:06:32.679Z,1516917992.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:33.053Z,1516917993.053 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:33.054Z,1516917993.054 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:06:33.056Z,1516917993.056 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:33.090Z,1516917993.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-25T22:06:33.091Z,1516917993.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:33.457Z,1516917993.457 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:33.486Z,1516917993.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-25T22:06:33.487Z,1516917993.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:33.840Z,1516917993.840 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:06:33.841Z,1516917993.841 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:33.910Z,1516917993.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-25T22:06:33.911Z,1516917993.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:34.247Z,1516917994.247 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:34.288Z,1516917994.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-25T22:06:34.293Z,1516917994.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:34.686Z,1516917994.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-25T22:06:34.687Z,1516917994.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:35.041Z,1516917995.041 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:35.042Z,1516917995.042 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:06:35.044Z,1516917995.044 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:35.094Z,1516917995.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-25T22:06:35.095Z,1516917995.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:35.446Z,1516917995.446 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:35.468Z,1516917995.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-25T22:06:35.469Z,1516917995.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:35.893Z,1516917995.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-25T22:06:35.894Z,1516917995.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:36.241Z,1516917996.241 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:36.242Z,1516917996.242 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:06:36.244Z,1516917996.244 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:36.276Z,1516917996.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-25T22:06:36.285Z,1516917996.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:36.645Z,1516917996.645 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:36.701Z,1516917996.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-25T22:06:36.702Z,1516917996.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:36.844Z,1516917996.844 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:06:36.845Z,1516917996.845 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:37.097Z,1516917997.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-25T22:06:37.098Z,1516917997.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:37.249Z,1516917997.249 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:37.472Z,1516917997.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-25T22:06:37.477Z,1516917997.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:37.882Z,1516917997.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-25T22:06:37.883Z,1516917997.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:38.045Z,1516917998.045 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:38.046Z,1516917998.046 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:06:38.048Z,1516917998.048 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:38.271Z,1516917998.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-25T22:06:38.272Z,1516917998.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:38.449Z,1516917998.449 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:38.679Z,1516917998.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-25T22:06:38.680Z,1516917998.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:39.077Z,1516917999.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-25T22:06:39.078Z,1516917999.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:39.245Z,1516917999.245 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:39.246Z,1516917999.246 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:06:39.248Z,1516917999.248 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:39.475Z,1516917999.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-25T22:06:39.477Z,1516917999.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:39.649Z,1516917999.649 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:39.850Z,1516917999.850 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:06:39.851Z,1516917999.851 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:39.911Z,1516917999.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-25T22:06:39.912Z,1516917999.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:40.253Z,1516918000.253 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:40.284Z,1516918000.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-25T22:06:40.285Z,1516918000.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:40.681Z,1516918000.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-25T22:06:40.682Z,1516918000.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:41.054Z,1516918001.054 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:41.055Z,1516918001.055 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:06:41.056Z,1516918001.056 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:41.094Z,1516918001.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-25T22:06:41.095Z,1516918001.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:41.457Z,1516918001.457 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:41.483Z,1516918001.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-25T22:06:41.484Z,1516918001.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:41.885Z,1516918001.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-25T22:06:41.886Z,1516918001.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:42.253Z,1516918002.253 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:42.254Z,1516918002.254 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:06:42.256Z,1516918002.256 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:42.298Z,1516918002.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-25T22:06:42.299Z,1516918002.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:42.659Z,1516918002.659 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:42.701Z,1516918002.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-25T22:06:42.702Z,1516918002.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:42.853Z,1516918002.853 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:06:42.854Z,1516918002.854 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:43.086Z,1516918003.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-25T22:06:43.087Z,1516918003.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:43.257Z,1516918003.257 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:43.478Z,1516918003.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-25T22:06:43.479Z,1516918003.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:43.896Z,1516918003.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-25T22:06:43.897Z,1516918003.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:44.053Z,1516918004.053 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:44.054Z,1516918004.054 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:06:44.056Z,1516918004.056 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:44.276Z,1516918004.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-01-25T22:06:44.277Z,1516918004.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:44.457Z,1516918004.457 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:44.679Z,1516918004.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:45.085Z,1516918005.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:45.253Z,1516918005.253 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:45.254Z,1516918005.254 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:06:45.256Z,1516918005.256 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:45.482Z,1516918005.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:45.657Z,1516918005.657 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:45.858Z,1516918005.858 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:06:45.859Z,1516918005.859 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:45.926Z,1516918005.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:46.261Z,1516918006.261 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:46.294Z,1516918006.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:46.690Z,1516918006.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:47.057Z,1516918007.057 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:47.058Z,1516918007.058 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:06:47.060Z,1516918007.060 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:47.068Z,1516918007.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:47.461Z,1516918007.461 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:47.467Z,1516918007.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:47.896Z,1516918007.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:48.257Z,1516918008.257 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:48.258Z,1516918008.258 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:06:48.260Z,1516918008.260 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:48.291Z,1516918008.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:48.663Z,1516918008.663 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:48.696Z,1516918008.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:48.862Z,1516918008.862 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:06:48.864Z,1516918008.864 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:49.079Z,1516918009.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:49.265Z,1516918009.265 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:49.468Z,1516918009.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:49.898Z,1516918009.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:50.061Z,1516918010.061 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:50.062Z,1516918010.062 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:06:50.064Z,1516918010.064 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:50.282Z,1516918010.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:50.465Z,1516918010.465 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:50.673Z,1516918010.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:51.071Z,1516918011.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:51.261Z,1516918011.261 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:51.262Z,1516918011.262 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:06:51.264Z,1516918011.264 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:51.486Z,1516918011.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:51.665Z,1516918011.665 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:51.887Z,1516918011.887 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:06:51.888Z,1516918011.888 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:51.906Z,1516918011.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:52.287Z,1516918012.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:52.293Z,1516918012.293 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:52.665Z,1516918012.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:53.070Z,1516918013.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:53.089Z,1516918013.089 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:53.090Z,1516918013.090 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:06:53.091Z,1516918013.091 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:53.470Z,1516918013.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:53.493Z,1516918013.493 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:53.877Z,1516918013.877 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:06:53.878Z,1516918013.878 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:53.900Z,1516918013.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:54.275Z,1516918014.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:54.281Z,1516918014.281 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:54.703Z,1516918014.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:55.075Z,1516918015.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:55.077Z,1516918015.077 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:55.078Z,1516918015.078 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:06:55.080Z,1516918015.080 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:55.472Z,1516918015.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:55.481Z,1516918015.481 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:55.894Z,1516918015.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:56.272Z,1516918016.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:56.277Z,1516918016.277 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:56.278Z,1516918016.278 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:06:56.280Z,1516918016.280 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:56.680Z,1516918016.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:56.681Z,1516918016.681 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:56.876Z,1516918016.876 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:06:56.877Z,1516918016.877 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:57.083Z,1516918017.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:57.281Z,1516918017.281 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:57.482Z,1516918017.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:57.915Z,1516918017.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:58.078Z,1516918018.078 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:58.079Z,1516918018.079 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:06:58.080Z,1516918018.080 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:58.313Z,1516918018.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:58.485Z,1516918018.485 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:58.678Z,1516918018.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:59.082Z,1516918019.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:59.281Z,1516918019.281 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:59.282Z,1516918019.282 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:06:59.283Z,1516918019.283 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:59.485Z,1516918019.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:06:59.685Z,1516918019.685 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:06:59.879Z,1516918019.879 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:06:59.881Z,1516918019.881 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:06:59.898Z,1516918019.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:00.285Z,1516918020.285 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:00.292Z,1516918020.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:00.692Z,1516918020.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:01.081Z,1516918021.081 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:01.082Z,1516918021.082 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:07:01.084Z,1516918021.084 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:01.095Z,1516918021.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:01.472Z,1516918021.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:01.485Z,1516918021.485 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:01.906Z,1516918021.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:02.272Z,1516918022.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:02.281Z,1516918022.281 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:02.282Z,1516918022.282 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:07:02.284Z,1516918022.284 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:02.668Z,1516918022.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:02.685Z,1516918022.685 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:02.884Z,1516918022.884 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:07:02.885Z,1516918022.885 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:03.085Z,1516918023.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:03.291Z,1516918023.291 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:03.482Z,1516918023.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:03.903Z,1516918023.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:04.085Z,1516918024.085 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:04.086Z,1516918024.086 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:07:04.088Z,1516918024.088 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:04.280Z,1516918024.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:04.489Z,1516918024.489 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:04.672Z,1516918024.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:05.074Z,1516918025.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:05.285Z,1516918025.285 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:05.286Z,1516918025.286 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:07:05.288Z,1516918025.288 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:05.482Z,1516918025.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:05.689Z,1516918025.689 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:05.889Z,1516918025.889 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:07:05.890Z,1516918025.890 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:05.901Z,1516918025.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:06.290Z,1516918026.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:06.293Z,1516918026.293 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:06.690Z,1516918026.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:07.081Z,1516918027.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:07.089Z,1516918027.089 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:07.090Z,1516918027.090 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:07:07.092Z,1516918027.092 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:07.481Z,1516918027.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:07.493Z,1516918027.493 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:07.912Z,1516918027.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:08.283Z,1516918028.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:08.289Z,1516918028.289 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:08.290Z,1516918028.290 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:07:08.292Z,1516918028.292 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:08.687Z,1516918028.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:08.693Z,1516918028.693 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:08.893Z,1516918028.893 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:07:08.894Z,1516918028.894 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:09.088Z,1516918029.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:09.297Z,1516918029.297 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:09.473Z,1516918029.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:09.899Z,1516918029.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:10.093Z,1516918030.093 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:10.094Z,1516918030.094 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:07:10.096Z,1516918030.096 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:10.291Z,1516918030.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:10.497Z,1516918030.497 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:10.687Z,1516918030.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:11.084Z,1516918031.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:11.293Z,1516918031.293 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:11.294Z,1516918031.294 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:07:11.296Z,1516918031.296 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:11.478Z,1516918031.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:11.697Z,1516918031.697 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:11.898Z,1516918031.898 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:07:11.899Z,1516918031.899 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:11.903Z,1516918031.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:12.286Z,1516918032.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:12.301Z,1516918032.301 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:12.688Z,1516918032.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:13.089Z,1516918033.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:13.097Z,1516918033.097 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:13.098Z,1516918033.098 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:07:13.100Z,1516918033.100 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:13.483Z,1516918033.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:13.501Z,1516918033.501 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:13.911Z,1516918033.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:14.297Z,1516918034.297 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:14.298Z,1516918034.298 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:07:14.300Z,1516918034.300 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:14.301Z,1516918034.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:14.691Z,1516918034.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:14.701Z,1516918034.701 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:14.902Z,1516918034.902 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:07:14.904Z,1516918034.904 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:15.094Z,1516918035.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:15.305Z,1516918035.305 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:15.467Z,1516918035.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:15.912Z,1516918035.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:16.101Z,1516918036.101 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:16.102Z,1516918036.102 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:07:16.104Z,1516918036.104 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:16.505Z,1516918036.505 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:17.301Z,1516918037.301 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:17.302Z,1516918037.302 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T22:07:17.303Z,1516918037.303 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:17.705Z,1516918037.705 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:17.908Z,1516918037.908 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:07:17.909Z,1516918037.909 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:18.313Z,1516918038.313 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:19.110Z,1516918039.110 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:19.111Z,1516918039.111 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:07:19.112Z,1516918039.112 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:19.157Z,1516918039.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:19.274Z,1516918039.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:19.513Z,1516918039.513 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:19.654Z,1516918039.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:20.052Z,1516918040.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:20.309Z,1516918040.309 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:20.310Z,1516918040.310 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:07:20.312Z,1516918040.312 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:20.450Z,1516918040.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:20.713Z,1516918040.713 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:20.846Z,1516918040.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:20.911Z,1516918040.911 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:07:20.913Z,1516918040.913 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:21.230Z,1516918041.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:21.317Z,1516918041.317 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:21.654Z,1516918041.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:22.055Z,1516918042.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:22.113Z,1516918042.113 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:22.114Z,1516918042.114 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:07:22.116Z,1516918042.116 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:22.456Z,1516918042.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:22.517Z,1516918042.517 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:22.829Z,1516918042.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:23.233Z,1516918043.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:23.313Z,1516918043.313 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:23.314Z,1516918043.314 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:07:23.316Z,1516918043.316 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:23.630Z,1516918043.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:23.717Z,1516918043.717 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:23.916Z,1516918043.916 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:07:23.918Z,1516918043.918 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:24.037Z,1516918044.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:24.321Z,1516918044.321 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:24.443Z,1516918044.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:24.858Z,1516918044.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:25.117Z,1516918045.117 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:25.118Z,1516918045.118 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:07:25.120Z,1516918045.120 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:25.248Z,1516918045.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:25.521Z,1516918045.521 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:25.642Z,1516918045.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:26.045Z,1516918046.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:26.317Z,1516918046.317 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:26.318Z,1516918046.318 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:07:26.319Z,1516918046.319 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:26.443Z,1516918046.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:26.721Z,1516918046.721 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:26.846Z,1516918046.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:26.921Z,1516918046.921 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:07:26.922Z,1516918046.922 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:27.248Z,1516918047.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:27.325Z,1516918047.325 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:27.646Z,1516918047.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:28.056Z,1516918048.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:28.121Z,1516918048.121 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:28.122Z,1516918048.122 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:07:28.124Z,1516918048.124 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:28.452Z,1516918048.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:28.525Z,1516918048.525 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:28.851Z,1516918048.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:29.250Z,1516918049.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:29.321Z,1516918049.321 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:29.322Z,1516918049.322 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:07:29.324Z,1516918049.324 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:29.630Z,1516918049.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:29.725Z,1516918049.725 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:29.925Z,1516918049.925 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:07:29.927Z,1516918049.927 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:30.030Z,1516918050.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:30.329Z,1516918050.329 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:30.459Z,1516918050.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:30.840Z,1516918050.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:31.125Z,1516918051.125 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:31.126Z,1516918051.126 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:07:31.128Z,1516918051.128 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:31.244Z,1516918051.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:31.529Z,1516918051.529 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:31.638Z,1516918051.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:32.038Z,1516918052.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:32.325Z,1516918052.325 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:32.326Z,1516918052.326 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:07:32.327Z,1516918052.327 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:32.431Z,1516918052.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:32.729Z,1516918052.729 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:32.832Z,1516918052.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:32.930Z,1516918052.930 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:07:32.931Z,1516918052.931 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:33.246Z,1516918053.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:33.333Z,1516918053.333 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:33.636Z,1516918053.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:34.039Z,1516918054.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:34.129Z,1516918054.129 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:34.130Z,1516918054.130 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:07:34.132Z,1516918054.132 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:34.440Z,1516918054.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:34.533Z,1516918054.533 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:34.840Z,1516918054.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:35.239Z,1516918055.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:35.329Z,1516918055.329 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:35.330Z,1516918055.330 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:07:35.332Z,1516918055.332 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:35.632Z,1516918055.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:35.733Z,1516918055.733 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:35.935Z,1516918055.935 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:07:35.936Z,1516918055.936 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:36.030Z,1516918056.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:36.337Z,1516918056.337 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:36.438Z,1516918056.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:36.846Z,1516918056.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:37.133Z,1516918057.133 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:37.134Z,1516918057.134 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:07:37.136Z,1516918057.136 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:37.240Z,1516918057.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:37.537Z,1516918057.537 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:37.640Z,1516918057.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:38.038Z,1516918058.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:38.333Z,1516918058.333 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:38.334Z,1516918058.334 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T22:07:38.335Z,1516918058.335 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:38.433Z,1516918058.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:38.737Z,1516918058.737 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:38.835Z,1516918058.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:38.940Z,1516918058.940 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T22:07:38.941Z,1516918058.941 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:39.240Z,1516918059.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:39.345Z,1516918059.345 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:39.643Z,1516918059.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:40.045Z,1516918060.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:40.141Z,1516918060.141 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:40.142Z,1516918060.142 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:07:40.144Z,1516918060.144 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:40.447Z,1516918060.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:40.545Z,1516918060.545 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:40.838Z,1516918060.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:41.233Z,1516918061.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:41.341Z,1516918061.341 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:41.342Z,1516918061.342 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010802 psu
2018-01-25T22:07:41.344Z,1516918061.344 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:41.645Z,1516918061.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:41.745Z,1516918061.745 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:41.944Z,1516918061.944 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T22:07:41.945Z,1516918061.945 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:42.032Z,1516918062.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:42.349Z,1516918062.349 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:42.443Z,1516918062.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:42.850Z,1516918062.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:43.145Z,1516918063.145 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:43.146Z,1516918063.146 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T22:07:43.148Z,1516918063.148 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:43.247Z,1516918063.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:43.549Z,1516918063.549 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:43.634Z,1516918063.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:44.035Z,1516918064.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:44.345Z,1516918064.345 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:44.346Z,1516918064.346 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T22:07:44.348Z,1516918064.348 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:44.441Z,1516918064.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:44.749Z,1516918064.749 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:44.834Z,1516918064.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:44.949Z,1516918064.949 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T22:07:44.950Z,1516918064.950 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:45.245Z,1516918065.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:45.353Z,1516918065.353 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:45.646Z,1516918065.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:46.047Z,1516918066.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:46.149Z,1516918066.149 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:46.150Z,1516918066.150 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T22:07:46.152Z,1516918066.152 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:46.454Z,1516918066.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:46.553Z,1516918066.553 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:46.838Z,1516918066.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:47.240Z,1516918067.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:47.349Z,1516918067.349 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:47.350Z,1516918067.350 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T22:07:47.352Z,1516918067.352 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:47.645Z,1516918067.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:47.753Z,1516918067.753 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:47.953Z,1516918067.953 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T22:07:47.955Z,1516918067.955 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:48.033Z,1516918068.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:48.357Z,1516918068.357 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:48.446Z,1516918068.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:48.854Z,1516918068.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:49.153Z,1516918069.153 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:49.154Z,1516918069.154 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T22:07:49.156Z,1516918069.156 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:49.243Z,1516918069.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:49.557Z,1516918069.557 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:49.638Z,1516918069.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:50.035Z,1516918070.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:50.353Z,1516918070.353 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:50.354Z,1516918070.354 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T22:07:50.355Z,1516918070.355 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:50.441Z,1516918070.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:50.757Z,1516918070.757 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:50.838Z,1516918070.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:50.958Z,1516918070.958 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T22:07:50.959Z,1516918070.959 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:51.245Z,1516918071.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:51.361Z,1516918071.361 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:51.642Z,1516918071.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:52.047Z,1516918072.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:52.157Z,1516918072.157 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:52.158Z,1516918072.158 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T22:07:52.160Z,1516918072.160 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:52.456Z,1516918072.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:52.561Z,1516918072.561 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:52.834Z,1516918072.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:53.238Z,1516918073.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:53.357Z,1516918073.357 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:53.358Z,1516918073.358 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T22:07:53.360Z,1516918073.360 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:53.644Z,1516918073.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:53.761Z,1516918073.761 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:53.963Z,1516918073.963 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T22:07:53.964Z,1516918073.964 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:54.041Z,1516918074.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:54.365Z,1516918074.365 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:54.452Z,1516918074.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:54.854Z,1516918074.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:55.161Z,1516918075.161 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:55.162Z,1516918075.162 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T22:07:55.164Z,1516918075.164 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:55.248Z,1516918075.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:55.565Z,1516918075.565 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:55.646Z,1516918075.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:56.030Z,1516918076.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:56.361Z,1516918076.361 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:56.362Z,1516918076.362 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T22:07:56.363Z,1516918076.363 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:56.454Z,1516918076.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:56.765Z,1516918076.765 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2018-01-25T22:07:56.838Z,1516918076.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:56.967Z,1516918076.967 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T22:07:56.969Z,1516918076.969 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:57.246Z,1516918077.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:57.642Z,1516918077.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:58.039Z,1516918078.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:58.170Z,1516918078.170 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T22:07:58.171Z,1516918078.171 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:58.440Z,1516918078.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:58.840Z,1516918078.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:59.231Z,1516918079.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:59.370Z,1516918079.370 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T22:07:59.371Z,1516918079.371 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:07:59.632Z,1516918079.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:07:59.972Z,1516918079.972 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T22:07:59.973Z,1516918079.973 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:00.054Z,1516918080.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:00.450Z,1516918080.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:00.850Z,1516918080.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:01.174Z,1516918081.174 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T22:08:01.175Z,1516918081.175 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:01.251Z,1516918081.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:01.640Z,1516918081.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:02.042Z,1516918082.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:02.374Z,1516918082.374 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T22:08:02.375Z,1516918082.375 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:02.446Z,1516918082.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:02.840Z,1516918082.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:02.977Z,1516918082.977 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T22:08:02.979Z,1516918082.979 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:03.245Z,1516918083.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:03.646Z,1516918083.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:04.048Z,1516918084.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:04.178Z,1516918084.178 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T22:08:04.179Z,1516918084.179 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:04.456Z,1516918084.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:04.844Z,1516918084.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:05.244Z,1516918085.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:05.378Z,1516918085.378 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T22:08:05.379Z,1516918085.379 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:05.646Z,1516918085.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:05.982Z,1516918085.982 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010800 psu
2018-01-25T22:08:05.983Z,1516918085.983 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:06.054Z,1516918086.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:06.453Z,1516918086.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:06.859Z,1516918086.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:07.182Z,1516918087.182 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T22:08:07.184Z,1516918087.184 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:07.274Z,1516918087.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:07.631Z,1516918087.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:08.031Z,1516918088.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:08.382Z,1516918088.382 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T22:08:08.384Z,1516918088.384 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:08.442Z,1516918088.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:08.842Z,1516918088.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:08.986Z,1516918088.986 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010800 psu
2018-01-25T22:08:08.987Z,1516918088.987 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:09.242Z,1516918089.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:09.644Z,1516918089.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:10.044Z,1516918090.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:10.186Z,1516918090.186 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010800 psu
2018-01-25T22:08:10.187Z,1516918090.187 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:10.455Z,1516918090.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:10.834Z,1516918090.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:11.238Z,1516918091.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:11.386Z,1516918091.386 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010800 psu
2018-01-25T22:08:11.388Z,1516918091.388 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:11.638Z,1516918091.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:12.003Z,1516918092.003 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010800 psu
2018-01-25T22:08:12.022Z,1516918092.022 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:12.043Z,1516918092.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:12.444Z,1516918092.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:12.457Z,1516918092.457 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-25T22:08:12.850Z,1516918092.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:13.222Z,1516918093.222 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010801 psu
2018-01-25T22:08:13.223Z,1516918093.223 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:13.274Z,1516918093.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:13.638Z,1516918093.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:13.000Z,1516918094.000 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010800 psu
2018-01-25T22:08:14.001Z,1516918094.001 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:14.067Z,1516918094.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:14.450Z,1516918094.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:14.826Z,1516918094.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:15.202Z,1516918095.202 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010800 psu
2018-01-25T22:08:15.203Z,1516918095.203 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:15.254Z,1516918095.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:15.651Z,1516918095.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:16.059Z,1516918096.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:16.402Z,1516918096.402 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010800 psu
2018-01-25T22:08:16.403Z,1516918096.403 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:16.998Z,1516918096.998 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010800 psu
2018-01-25T22:08:16.000Z,1516918097.000 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:18.198Z,1516918098.198 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010800 psu
2018-01-25T22:08:18.199Z,1516918098.199 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:19.320Z,1516918099.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:19.398Z,1516918099.398 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010800 psu
2018-01-25T22:08:19.399Z,1516918099.399 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:19.474Z,1516918099.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:19.785Z,1516918099.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:20.003Z,1516918100.003 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010800 psu
2018-01-25T22:08:20.004Z,1516918100.004 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:20.202Z,1516918100.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:20.584Z,1516918100.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:20.998Z,1516918100.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:21.202Z,1516918101.202 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010800 psu
2018-01-25T22:08:21.203Z,1516918101.203 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:21.392Z,1516918101.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:21.792Z,1516918101.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:22.202Z,1516918102.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:22.402Z,1516918102.402 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010800 psu
2018-01-25T22:08:22.403Z,1516918102.403 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:22.594Z,1516918102.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:22.983Z,1516918102.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:23.036Z,1516918103.036 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010799 psu
2018-01-25T22:08:23.037Z,1516918103.037 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:23.396Z,1516918103.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:23.803Z,1516918103.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:24.194Z,1516918104.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:24.238Z,1516918104.238 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010800 psu
2018-01-25T22:08:24.239Z,1516918104.239 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:24.595Z,1516918104.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:25.012Z,1516918105.012 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010800 psu
2018-01-25T22:08:25.014Z,1516918105.014 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:25.016Z,1516918105.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:25.396Z,1516918105.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:25.799Z,1516918105.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:26.210Z,1516918106.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:26.214Z,1516918106.214 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010800 psu
2018-01-25T22:08:26.215Z,1516918106.215 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:26.580Z,1516918106.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:26.983Z,1516918106.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:27.391Z,1516918107.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:27.414Z,1516918107.414 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010799 psu
2018-01-25T22:08:27.415Z,1516918107.415 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:27.788Z,1516918107.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:28.015Z,1516918108.015 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010800 psu
2018-01-25T22:08:28.017Z,1516918108.017 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:28.187Z,1516918108.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:28.584Z,1516918108.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:28.999Z,1516918108.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:29.218Z,1516918109.218 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010800 psu
2018-01-25T22:08:29.219Z,1516918109.219 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:29.402Z,1516918109.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:29.795Z,1516918109.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:30.191Z,1516918110.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:30.418Z,1516918110.418 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010799 psu
2018-01-25T22:08:30.419Z,1516918110.419 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:30.581Z,1516918110.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:30.994Z,1516918110.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:31.020Z,1516918111.020 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010800 psu
2018-01-25T22:08:31.021Z,1516918111.021 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:31.392Z,1516918111.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:31.795Z,1516918111.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:32.201Z,1516918112.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:32.222Z,1516918112.222 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010800 psu
2018-01-25T22:08:32.224Z,1516918112.224 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:32.578Z,1516918112.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:32.978Z,1516918112.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:33.410Z,1516918113.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:33.422Z,1516918113.422 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010800 psu
2018-01-25T22:08:33.423Z,1516918113.423 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:33.787Z,1516918113.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:34.024Z,1516918114.024 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010799 psu
2018-01-25T22:08:34.026Z,1516918114.026 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:34.211Z,1516918114.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:34.586Z,1516918114.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:34.982Z,1516918114.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:35.226Z,1516918115.226 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010799 psu
2018-01-25T22:08:35.227Z,1516918115.227 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:35.387Z,1516918115.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:35.788Z,1516918115.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:36.190Z,1516918116.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:36.426Z,1516918116.426 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010799 psu
2018-01-25T22:08:36.427Z,1516918116.427 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:36.590Z,1516918116.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:36.990Z,1516918116.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:37.029Z,1516918117.029 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010799 psu
2018-01-25T22:08:37.031Z,1516918117.031 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:37.395Z,1516918117.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:37.787Z,1516918117.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:38.194Z,1516918118.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:38.230Z,1516918118.230 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010799 psu
2018-01-25T22:08:38.231Z,1516918118.231 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:38.591Z,1516918118.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:38.979Z,1516918118.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:39.390Z,1516918119.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:39.430Z,1516918119.430 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010799 psu
2018-01-25T22:08:39.431Z,1516918119.431 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:39.794Z,1516918119.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:40.034Z,1516918120.034 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010799 psu
2018-01-25T22:08:40.035Z,1516918120.035 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:40.193Z,1516918120.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:40.590Z,1516918120.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:40.980Z,1516918120.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:41.234Z,1516918121.234 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010799 psu
2018-01-25T22:08:41.235Z,1516918121.235 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:41.394Z,1516918121.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:41.795Z,1516918121.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:42.190Z,1516918122.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:42.434Z,1516918122.434 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010799 psu
2018-01-25T22:08:42.435Z,1516918122.435 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:42.594Z,1516918122.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:42.990Z,1516918122.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:43.038Z,1516918123.038 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010799 psu
2018-01-25T22:08:43.040Z,1516918123.040 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:43.390Z,1516918123.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:43.798Z,1516918123.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:44.201Z,1516918124.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:44.238Z,1516918124.238 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010799 psu
2018-01-25T22:08:44.239Z,1516918124.239 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:44.587Z,1516918124.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:44.990Z,1516918124.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:45.395Z,1516918125.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:45.438Z,1516918125.438 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010799 psu
2018-01-25T22:08:45.439Z,1516918125.439 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:45.795Z,1516918125.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:46.043Z,1516918126.043 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010799 psu
2018-01-25T22:08:46.044Z,1516918126.044 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:46.195Z,1516918126.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:46.598Z,1516918126.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:46.978Z,1516918126.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:47.246Z,1516918127.246 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010841 psu
2018-01-25T22:08:47.247Z,1516918127.247 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:47.404Z,1516918127.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:47.818Z,1516918127.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:48.183Z,1516918128.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:48.447Z,1516918128.447 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010799 psu
2018-01-25T22:08:48.448Z,1516918128.448 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:48.581Z,1516918128.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:48.982Z,1516918128.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:49.048Z,1516918129.048 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010799 psu
2018-01-25T22:08:49.049Z,1516918129.049 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:49.384Z,1516918129.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:49.787Z,1516918129.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:50.184Z,1516918130.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:50.250Z,1516918130.250 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010799 psu
2018-01-25T22:08:50.251Z,1516918130.251 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:50.586Z,1516918130.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:50.976Z,1516918130.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:51.388Z,1516918131.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:51.451Z,1516918131.451 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010798 psu
2018-01-25T22:08:51.453Z,1516918131.453 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:51.787Z,1516918131.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:52.054Z,1516918132.054 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010799 psu
2018-01-25T22:08:52.056Z,1516918132.056 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:52.187Z,1516918132.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:52.590Z,1516918132.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:52.988Z,1516918132.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:53.255Z,1516918133.255 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010799 psu
2018-01-25T22:08:53.256Z,1516918133.256 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:53.383Z,1516918133.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:53.791Z,1516918133.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:54.198Z,1516918134.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:54.454Z,1516918134.454 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010799 psu
2018-01-25T22:08:54.455Z,1516918134.455 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:54.589Z,1516918134.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:54.986Z,1516918134.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:55.057Z,1516918135.057 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010798 psu
2018-01-25T22:08:55.058Z,1516918135.058 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:55.380Z,1516918135.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:55.786Z,1516918135.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:56.193Z,1516918136.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:56.258Z,1516918136.258 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010798 psu
2018-01-25T22:08:56.259Z,1516918136.259 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:56.592Z,1516918136.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:56.995Z,1516918136.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:57.395Z,1516918137.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:57.458Z,1516918137.458 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010798 psu
2018-01-25T22:08:57.459Z,1516918137.459 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:57.786Z,1516918137.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:58.061Z,1516918138.061 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010798 psu
2018-01-25T22:08:58.063Z,1516918138.063 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:58.190Z,1516918138.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:58.594Z,1516918138.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:58.990Z,1516918138.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:59.262Z,1516918139.262 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010798 psu
2018-01-25T22:08:59.263Z,1516918139.263 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:08:59.395Z,1516918139.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:08:59.808Z,1516918139.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:00.198Z,1516918140.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:00.462Z,1516918140.462 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010798 psu
2018-01-25T22:09:00.463Z,1516918140.463 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:00.610Z,1516918140.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:00.978Z,1516918140.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:01.066Z,1516918141.066 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010798 psu
2018-01-25T22:09:01.067Z,1516918141.067 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:01.378Z,1516918141.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:01.777Z,1516918141.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:02.182Z,1516918142.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:02.266Z,1516918142.266 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010798 psu
2018-01-25T22:09:02.267Z,1516918142.267 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:02.613Z,1516918142.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:03.012Z,1516918143.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:03.384Z,1516918143.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:03.466Z,1516918143.466 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010798 psu
2018-01-25T22:09:03.467Z,1516918143.467 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:03.785Z,1516918143.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:04.071Z,1516918144.071 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010798 psu
2018-01-25T22:09:04.072Z,1516918144.072 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:04.185Z,1516918144.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:04.581Z,1516918144.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:04.984Z,1516918144.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:05.270Z,1516918145.270 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010798 psu
2018-01-25T22:09:05.271Z,1516918145.271 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:05.387Z,1516918145.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:05.791Z,1516918145.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:06.198Z,1516918146.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:06.470Z,1516918146.470 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010798 psu
2018-01-25T22:09:06.471Z,1516918146.471 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:06.614Z,1516918146.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:06.990Z,1516918146.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:07.075Z,1516918147.075 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010798 psu
2018-01-25T22:09:07.077Z,1516918147.077 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:07.380Z,1516918147.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:07.781Z,1516918147.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:08.191Z,1516918148.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:08.278Z,1516918148.278 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010798 psu
2018-01-25T22:09:08.279Z,1516918148.279 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:08.594Z,1516918148.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:08.993Z,1516918148.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:09.394Z,1516918149.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:09.478Z,1516918149.478 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010797 psu
2018-01-25T22:09:09.479Z,1516918149.479 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:09.780Z,1516918149.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:10.080Z,1516918150.080 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010797 psu
2018-01-25T22:09:10.081Z,1516918150.081 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:10.193Z,1516918150.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:10.591Z,1516918150.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:10.981Z,1516918150.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:11.282Z,1516918151.282 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010797 psu
2018-01-25T22:09:11.283Z,1516918151.283 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:11.390Z,1516918151.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:11.790Z,1516918151.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:12.193Z,1516918152.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:12.482Z,1516918152.482 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010797 psu
2018-01-25T22:09:12.483Z,1516918152.483 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:12.593Z,1516918152.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:12.990Z,1516918152.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:13.085Z,1516918153.085 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010797 psu
2018-01-25T22:09:13.086Z,1516918153.086 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:13.380Z,1516918153.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:13.781Z,1516918153.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:14.191Z,1516918154.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:14.286Z,1516918154.286 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010797 psu
2018-01-25T22:09:14.287Z,1516918154.287 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:14.594Z,1516918154.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:14.993Z,1516918154.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:15.390Z,1516918155.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:15.486Z,1516918155.486 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010797 psu
2018-01-25T22:09:15.487Z,1516918155.487 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:15.782Z,1516918155.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:15.785Z,1516918155.785 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-25T22:04:15.4Z
2018-01-25T22:09:15.785Z,1516918155.785 [Default:CheckIn:Read_GPS] Stopped
2018-01-25T22:09:15.785Z,1516918155.785 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-25T22:09:16.089Z,1516918156.089 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010797 psu
2018-01-25T22:09:16.091Z,1516918156.091 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:16.191Z,1516918156.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:17.290Z,1516918157.290 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010797 psu
2018-01-25T22:09:17.291Z,1516918157.291 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:18.490Z,1516918158.490 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010797 psu
2018-01-25T22:09:18.491Z,1516918158.491 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:19.094Z,1516918159.094 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010797 psu
2018-01-25T22:09:19.095Z,1516918159.095 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:19.599Z,1516918159.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:19.681Z,1516918159.681 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180125T211802/Courier0020.lzma
2018-01-25T22:09:19.747Z,1516918159.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:20.118Z,1516918160.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:20.294Z,1516918160.294 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010797 psu
2018-01-25T22:09:20.295Z,1516918160.295 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:20.455Z,1516918160.455 [DataOverHttps](INFO): Moved sent file to Logs/20180125T211802/Courier0020.lzma.bak
2018-01-25T22:09:20.455Z,1516918160.455 [DataOverHttps](INFO): SBD MOMSN=7761304
2018-01-25T22:09:20.518Z,1516918160.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:21.221Z,1516918161.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:21.328Z,1516918161.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:21.494Z,1516918161.494 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010797 psu
2018-01-25T22:09:21.495Z,1516918161.495 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:22.099Z,1516918162.099 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010797 psu
2018-01-25T22:09:22.100Z,1516918162.100 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:23.298Z,1516918163.298 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010797 psu
2018-01-25T22:09:23.299Z,1516918163.299 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:24.498Z,1516918164.498 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010797 psu
2018-01-25T22:09:24.499Z,1516918164.499 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:24.574Z,1516918164.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:24.703Z,1516918164.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:25.079Z,1516918165.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:25.103Z,1516918165.103 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010797 psu
2018-01-25T22:09:25.105Z,1516918165.105 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:25.476Z,1516918165.476 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:25.481Z,1516918165.481 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 17
2018-01-25T22:09:25.481Z,1516918165.481 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-25T22:09:25.482Z,1516918165.482 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:25.483Z,1516918165.483 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17
2018-01-25T22:09:25.483Z,1516918165.483 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-25T22:09:25.484Z,1516918165.484 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:25.489Z,1516918165.489 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2018-01-25T22:09:25.489Z,1516918165.489 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-25T22:09:25.513Z,1516918165.513 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-25T22:09:25.513Z,1516918165.513 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-25T22:09:25.513Z,1516918165.513 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-25T22:09:25.890Z,1516918165.890 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-25T22:09:25.890Z,1516918165.890 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 17
2018-01-25T22:09:25.890Z,1516918165.890 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-25T22:09:25.891Z,1516918165.891 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17
2018-01-25T22:09:25.891Z,1516918165.891 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-25T22:09:25.891Z,1516918165.891 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2018-01-25T22:09:26.261Z,1516918166.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-25T22:09:26.262Z,1516918166.262 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T22:09:26.262Z,1516918166.262 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T22:09:26.262Z,1516918166.262 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-25T22:09:26.263Z,1516918166.263 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T22:09:26.263Z,1516918166.263 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T22:09:26.263Z,1516918166.263 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-25T22:09:26.264Z,1516918166.264 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T22:09:26.264Z,1516918166.264 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T22:09:26.306Z,1516918166.306 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010797 psu
2018-01-25T22:09:26.307Z,1516918166.307 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:27.506Z,1516918167.506 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010797 psu
2018-01-25T22:09:27.507Z,1516918167.507 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:28.108Z,1516918168.108 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010797 psu
2018-01-25T22:09:28.109Z,1516918168.109 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:29.310Z,1516918169.310 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010797 psu
2018-01-25T22:09:29.311Z,1516918169.311 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:29.532Z,1516918169.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-01-25T22:09:29.533Z,1516918169.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:29.620Z,1516918169.620 [DataOverHttps](INFO): Sending 144 bytes from file Logs/20180125T211802/Express0021.lzma
2018-01-25T22:09:29.666Z,1516918169.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.2 s old, using for 20.0 s.
2018-01-25T22:09:29.667Z,1516918169.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:30.019Z,1516918170.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-01-25T22:09:30.020Z,1516918170.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:30.366Z,1516918170.366 [DataOverHttps](INFO): Moved sent file to Logs/20180125T211802/Express0021.lzma.bak
2018-01-25T22:09:30.366Z,1516918170.366 [DataOverHttps](INFO): SBD MOMSN=7761306
2018-01-25T22:09:30.440Z,1516918170.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.0 s old, using for 20.0 s.
2018-01-25T22:09:30.441Z,1516918170.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:30.510Z,1516918170.510 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010797 psu
2018-01-25T22:09:30.511Z,1516918170.511 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:31.113Z,1516918171.113 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010797 psu
2018-01-25T22:09:31.114Z,1516918171.114 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:31.186Z,1516918171.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-01-25T22:09:31.187Z,1516918171.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:31.190Z,1516918171.190 [Default:CheckIn:Read_Iridium] Stopped
2018-01-25T22:09:31.190Z,1516918171.190 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-25T22:09:31.190Z,1516918171.190 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-25T22:09:31.319Z,1516918171.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s.
2018-01-25T22:09:31.320Z,1516918171.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:32.314Z,1516918172.314 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010797 psu
2018-01-25T22:09:32.315Z,1516918172.315 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:33.514Z,1516918173.514 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010797 psu
2018-01-25T22:09:33.515Z,1516918173.515 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:34.117Z,1516918174.117 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010797 psu
2018-01-25T22:09:34.119Z,1516918174.119 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:34.533Z,1516918174.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2018-01-25T22:09:34.534Z,1516918174.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:34.665Z,1516918174.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-25T22:09:34.666Z,1516918174.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:35.023Z,1516918175.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s.
2018-01-25T22:09:35.024Z,1516918175.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:35.318Z,1516918175.318 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010797 psu
2018-01-25T22:09:35.319Z,1516918175.319 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:35.409Z,1516918175.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s.
2018-01-25T22:09:35.410Z,1516918175.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:35.810Z,1516918175.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2018-01-25T22:09:35.811Z,1516918175.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:36.202Z,1516918176.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s.
2018-01-25T22:09:36.203Z,1516918176.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:36.518Z,1516918176.518 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010797 psu
2018-01-25T22:09:36.519Z,1516918176.519 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:36.600Z,1516918176.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s.
2018-01-25T22:09:36.601Z,1516918176.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:37.006Z,1516918177.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s.
2018-01-25T22:09:37.007Z,1516918177.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:37.122Z,1516918177.122 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010796 psu
2018-01-25T22:09:37.123Z,1516918177.123 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:37.410Z,1516918177.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.9 s old, using for 20.0 s.
2018-01-25T22:09:37.411Z,1516918177.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:37.810Z,1516918177.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s.
2018-01-25T22:09:37.811Z,1516918177.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:38.209Z,1516918178.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.7 s old, using for 20.0 s.
2018-01-25T22:09:38.210Z,1516918178.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:38.322Z,1516918178.322 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010797 psu
2018-01-25T22:09:38.323Z,1516918178.323 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:38.608Z,1516918178.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.1 s old, using for 20.0 s.
2018-01-25T22:09:38.609Z,1516918178.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:39.004Z,1516918179.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.5 s old, using for 20.0 s.
2018-01-25T22:09:39.005Z,1516918179.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:39.397Z,1516918179.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s.
2018-01-25T22:09:39.398Z,1516918179.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:39.522Z,1516918179.522 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010797 psu
2018-01-25T22:09:39.523Z,1516918179.523 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:39.807Z,1516918179.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s.
2018-01-25T22:09:39.808Z,1516918179.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:40.126Z,1516918180.126 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010796 psu
2018-01-25T22:09:40.128Z,1516918180.128 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:40.198Z,1516918180.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2018-01-25T22:09:40.199Z,1516918180.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:40.613Z,1516918180.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s.
2018-01-25T22:09:40.614Z,1516918180.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:41.014Z,1516918181.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s.
2018-01-25T22:09:41.015Z,1516918181.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:41.326Z,1516918181.326 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010796 psu
2018-01-25T22:09:41.327Z,1516918181.327 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:41.421Z,1516918181.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s.
2018-01-25T22:09:41.422Z,1516918181.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:41.793Z,1516918181.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s.
2018-01-25T22:09:41.794Z,1516918181.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:42.192Z,1516918182.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s.
2018-01-25T22:09:42.193Z,1516918182.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:42.526Z,1516918182.526 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010796 psu
2018-01-25T22:09:42.527Z,1516918182.527 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:42.604Z,1516918182.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s.
2018-01-25T22:09:42.605Z,1516918182.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:42.999Z,1516918182.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s.
2018-01-25T22:09:43.000Z,1516918183.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:43.131Z,1516918183.131 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010796 psu
2018-01-25T22:09:43.132Z,1516918183.132 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:43.405Z,1516918183.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s.
2018-01-25T22:09:43.406Z,1516918183.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:43.812Z,1516918183.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2018-01-25T22:09:43.814Z,1516918183.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:44.208Z,1516918184.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2018-01-25T22:09:44.209Z,1516918184.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:44.334Z,1516918184.334 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010796 psu
2018-01-25T22:09:44.335Z,1516918184.335 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:44.614Z,1516918184.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2018-01-25T22:09:44.615Z,1516918184.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:45.002Z,1516918185.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2018-01-25T22:09:45.003Z,1516918185.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:45.392Z,1516918185.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2018-01-25T22:09:45.393Z,1516918185.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:45.534Z,1516918185.534 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010796 psu
2018-01-25T22:09:45.535Z,1516918185.535 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:45.806Z,1516918185.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:46.136Z,1516918186.136 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010796 psu
2018-01-25T22:09:46.137Z,1516918186.137 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:46.213Z,1516918186.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:46.605Z,1516918186.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:47.006Z,1516918187.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:47.338Z,1516918187.338 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010796 psu
2018-01-25T22:09:47.339Z,1516918187.339 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:47.426Z,1516918187.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:47.803Z,1516918187.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:48.203Z,1516918188.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:48.539Z,1516918188.539 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010796 psu
2018-01-25T22:09:48.541Z,1516918188.541 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:48.618Z,1516918188.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:49.010Z,1516918189.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:49.140Z,1516918189.140 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010796 psu
2018-01-25T22:09:49.142Z,1516918189.142 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:49.407Z,1516918189.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:49.818Z,1516918189.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:50.207Z,1516918190.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:50.344Z,1516918190.344 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010796 psu
2018-01-25T22:09:50.345Z,1516918190.345 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:50.607Z,1516918190.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:51.010Z,1516918191.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:51.418Z,1516918191.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:51.550Z,1516918191.550 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010796 psu
2018-01-25T22:09:51.552Z,1516918191.552 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:51.819Z,1516918191.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:52.145Z,1516918192.145 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010796 psu
2018-01-25T22:09:52.146Z,1516918192.146 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:52.246Z,1516918192.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:52.628Z,1516918192.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:53.030Z,1516918193.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:53.377Z,1516918193.377 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010796 psu
2018-01-25T22:09:53.392Z,1516918193.392 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:53.446Z,1516918193.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:53.805Z,1516918193.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:54.148Z,1516918194.148 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010796 psu
2018-01-25T22:09:54.163Z,1516918194.163 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:54.222Z,1516918194.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:54.606Z,1516918194.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:54.993Z,1516918194.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:55.366Z,1516918195.366 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010796 psu
2018-01-25T22:09:55.367Z,1516918195.367 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:55.419Z,1516918195.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:55.808Z,1516918195.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:56.151Z,1516918196.151 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010796 psu
2018-01-25T22:09:56.153Z,1516918196.153 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:56.240Z,1516918196.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:56.607Z,1516918196.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:57.041Z,1516918197.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:57.354Z,1516918197.354 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010796 psu
2018-01-25T22:09:57.355Z,1516918197.355 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:57.388Z,1516918197.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:57.793Z,1516918197.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:58.223Z,1516918198.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:58.554Z,1516918198.554 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010796 psu
2018-01-25T22:09:58.555Z,1516918198.555 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:58.610Z,1516918198.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:59.034Z,1516918199.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:59.157Z,1516918199.157 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010796 psu
2018-01-25T22:09:59.158Z,1516918199.158 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:09:59.414Z,1516918199.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:09:59.792Z,1516918199.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:00.203Z,1516918200.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:00.358Z,1516918200.358 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010796 psu
2018-01-25T22:10:00.359Z,1516918200.359 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:00.611Z,1516918200.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:00.993Z,1516918200.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:01.392Z,1516918201.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:01.558Z,1516918201.558 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010796 psu
2018-01-25T22:10:01.559Z,1516918201.559 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:01.818Z,1516918201.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:02.176Z,1516918202.176 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010796 psu
2018-01-25T22:10:02.177Z,1516918202.177 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:02.256Z,1516918202.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:02.635Z,1516918202.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:03.020Z,1516918203.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:03.378Z,1516918203.378 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010796 psu
2018-01-25T22:10:03.379Z,1516918203.379 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:03.434Z,1516918203.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:03.837Z,1516918203.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:04.249Z,1516918204.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:04.579Z,1516918204.579 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010796 psu
2018-01-25T22:10:04.580Z,1516918204.580 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:04.610Z,1516918204.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:05.030Z,1516918205.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:05.165Z,1516918205.165 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010795 psu
2018-01-25T22:10:05.167Z,1516918205.167 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:05.423Z,1516918205.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:05.831Z,1516918205.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:06.215Z,1516918206.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:06.366Z,1516918206.366 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010796 psu
2018-01-25T22:10:06.367Z,1516918206.367 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:06.611Z,1516918206.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:06.998Z,1516918206.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:07.442Z,1516918207.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:07.566Z,1516918207.566 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010795 psu
2018-01-25T22:10:07.568Z,1516918207.568 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:07.814Z,1516918207.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:08.170Z,1516918208.170 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010795 psu
2018-01-25T22:10:08.171Z,1516918208.171 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:08.228Z,1516918208.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:08.608Z,1516918208.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:08.990Z,1516918208.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:09.371Z,1516918209.371 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010795 psu
2018-01-25T22:10:09.372Z,1516918209.372 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:09.397Z,1516918209.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:09.800Z,1516918209.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:10.223Z,1516918210.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:10.570Z,1516918210.570 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010795 psu
2018-01-25T22:10:10.571Z,1516918210.571 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:10.610Z,1516918210.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:11.012Z,1516918211.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:11.174Z,1516918211.174 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010795 psu
2018-01-25T22:10:11.176Z,1516918211.176 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:11.404Z,1516918211.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:11.795Z,1516918211.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:12.214Z,1516918212.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:12.374Z,1516918212.374 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010795 psu
2018-01-25T22:10:12.375Z,1516918212.375 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:12.606Z,1516918212.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:13.003Z,1516918213.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:13.402Z,1516918213.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:13.574Z,1516918213.574 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010795 psu
2018-01-25T22:10:13.575Z,1516918213.575 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:13.814Z,1516918213.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:14.179Z,1516918214.179 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010795 psu
2018-01-25T22:10:14.180Z,1516918214.180 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:14.246Z,1516918214.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:14.606Z,1516918214.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:15.006Z,1516918215.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:15.378Z,1516918215.378 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010795 psu
2018-01-25T22:10:15.379Z,1516918215.379 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:15.388Z,1516918215.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:15.787Z,1516918215.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:16.219Z,1516918216.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:16.578Z,1516918216.578 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010795 psu
2018-01-25T22:10:16.579Z,1516918216.579 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:16.612Z,1516918216.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:17.015Z,1516918217.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:17.184Z,1516918217.184 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010795 psu
2018-01-25T22:10:17.185Z,1516918217.185 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:17.426Z,1516918217.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:17.791Z,1516918217.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:18.221Z,1516918218.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:18.386Z,1516918218.386 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010795 psu
2018-01-25T22:10:18.387Z,1516918218.387 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:18.598Z,1516918218.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:18.994Z,1516918218.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:19.399Z,1516918219.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:19.586Z,1516918219.586 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010795 psu
2018-01-25T22:10:19.587Z,1516918219.587 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:19.804Z,1516918219.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:20.190Z,1516918220.190 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010795 psu
2018-01-25T22:10:20.192Z,1516918220.192 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:20.234Z,1516918220.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:20.608Z,1516918220.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:21.002Z,1516918221.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:21.394Z,1516918221.394 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010795 psu
2018-01-25T22:10:21.396Z,1516918221.396 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:21.410Z,1516918221.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:21.786Z,1516918221.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:22.214Z,1516918222.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:22.594Z,1516918222.594 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010795 psu
2018-01-25T22:10:22.596Z,1516918222.596 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:22.608Z,1516918222.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:23.020Z,1516918223.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:23.193Z,1516918223.193 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010795 psu
2018-01-25T22:10:23.194Z,1516918223.194 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:23.424Z,1516918223.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:23.792Z,1516918223.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:24.221Z,1516918224.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:24.394Z,1516918224.394 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010795 psu
2018-01-25T22:10:24.395Z,1516918224.395 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:24.600Z,1516918224.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:24.000Z,1516918225.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:25.396Z,1516918225.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:25.594Z,1516918225.594 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010795 psu
2018-01-25T22:10:25.595Z,1516918225.595 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:25.801Z,1516918225.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:26.208Z,1516918226.208 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010795 psu
2018-01-25T22:10:26.210Z,1516918226.210 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:26.228Z,1516918226.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:26.602Z,1516918226.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:26.998Z,1516918226.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:27.392Z,1516918227.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:27.410Z,1516918227.410 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010795 psu
2018-01-25T22:10:27.411Z,1516918227.411 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:27.806Z,1516918227.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:28.201Z,1516918228.201 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010795 psu
2018-01-25T22:10:28.202Z,1516918228.202 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:28.225Z,1516918228.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:28.606Z,1516918228.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:29.005Z,1516918229.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:29.402Z,1516918229.402 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010795 psu
2018-01-25T22:10:29.403Z,1516918229.403 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:29.406Z,1516918229.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:29.797Z,1516918229.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:30.212Z,1516918230.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:30.602Z,1516918230.602 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010795 psu
2018-01-25T22:10:30.603Z,1516918230.603 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:30.606Z,1516918230.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:31.008Z,1516918231.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:31.233Z,1516918231.233 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010795 psu
2018-01-25T22:10:31.234Z,1516918231.234 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:31.422Z,1516918231.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:31.809Z,1516918231.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:32.434Z,1516918232.434 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010794 psu
2018-01-25T22:10:32.435Z,1516918232.435 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:33.209Z,1516918233.209 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010794 psu
2018-01-25T22:10:33.210Z,1516918233.210 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:34.410Z,1516918234.410 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010794 psu
2018-01-25T22:10:34.411Z,1516918234.411 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:35.055Z,1516918235.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:35.214Z,1516918235.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:35.530Z,1516918235.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:35.610Z,1516918235.610 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010794 psu
2018-01-25T22:10:35.611Z,1516918235.611 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:35.939Z,1516918235.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:36.213Z,1516918236.213 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010795 psu
2018-01-25T22:10:36.214Z,1516918236.214 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:36.353Z,1516918236.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:36.718Z,1516918236.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:37.113Z,1516918237.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:37.414Z,1516918237.414 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010795 psu
2018-01-25T22:10:37.415Z,1516918237.415 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:37.509Z,1516918237.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:37.923Z,1516918237.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:38.323Z,1516918238.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:38.614Z,1516918238.614 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010794 psu
2018-01-25T22:10:38.615Z,1516918238.615 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:38.723Z,1516918238.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:39.218Z,1516918239.218 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010794 psu
2018-01-25T22:10:39.219Z,1516918239.219 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:39.220Z,1516918239.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:39.518Z,1516918239.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:39.913Z,1516918239.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:40.318Z,1516918240.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:40.418Z,1516918240.418 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010794 psu
2018-01-25T22:10:40.419Z,1516918240.419 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:40.724Z,1516918240.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:41.123Z,1516918241.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:41.519Z,1516918241.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:41.618Z,1516918241.618 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010794 psu
2018-01-25T22:10:41.619Z,1516918241.619 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:41.944Z,1516918241.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:42.222Z,1516918242.222 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010794 psu
2018-01-25T22:10:42.224Z,1516918242.224 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:42.309Z,1516918242.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:42.718Z,1516918242.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:43.113Z,1516918243.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:43.422Z,1516918243.422 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010794 psu
2018-01-25T22:10:43.423Z,1516918243.423 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:43.518Z,1516918243.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:43.934Z,1516918243.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:44.338Z,1516918244.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:44.622Z,1516918244.622 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010794 psu
2018-01-25T22:10:44.623Z,1516918244.623 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:44.730Z,1516918244.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:45.118Z,1516918245.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:45.229Z,1516918245.229 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010794 psu
2018-01-25T22:10:45.230Z,1516918245.230 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:45.521Z,1516918245.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:45.922Z,1516918245.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:46.316Z,1516918246.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:46.432Z,1516918246.432 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010794 psu
2018-01-25T22:10:46.433Z,1516918246.433 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:46.724Z,1516918246.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:47.123Z,1516918247.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:47.519Z,1516918247.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:47.634Z,1516918247.634 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010794 psu
2018-01-25T22:10:47.635Z,1516918247.635 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:47.922Z,1516918247.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:48.233Z,1516918248.233 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010794 psu
2018-01-25T22:10:48.234Z,1516918248.234 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:48.320Z,1516918248.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:48.725Z,1516918248.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:49.116Z,1516918249.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:49.435Z,1516918249.435 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010794 psu
2018-01-25T22:10:49.437Z,1516918249.437 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:49.520Z,1516918249.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:49.934Z,1516918249.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:50.334Z,1516918250.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:50.638Z,1516918250.638 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010794 psu
2018-01-25T22:10:50.639Z,1516918250.639 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:50.725Z,1516918250.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:51.117Z,1516918251.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:51.236Z,1516918251.236 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010794 psu
2018-01-25T22:10:51.237Z,1516918251.237 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:51.526Z,1516918251.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:51.917Z,1516918251.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:52.318Z,1516918252.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:52.438Z,1516918252.438 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010794 psu
2018-01-25T22:10:52.439Z,1516918252.439 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:52.736Z,1516918252.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:53.130Z,1516918253.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:53.525Z,1516918253.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:53.638Z,1516918253.638 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010794 psu
2018-01-25T22:10:53.639Z,1516918253.639 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:53.930Z,1516918253.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:54.241Z,1516918254.241 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010794 psu
2018-01-25T22:10:54.242Z,1516918254.242 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:54.316Z,1516918254.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:54.716Z,1516918254.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:55.129Z,1516918255.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:55.442Z,1516918255.442 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010794 psu
2018-01-25T22:10:55.443Z,1516918255.443 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:55.521Z,1516918255.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:55.927Z,1516918255.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:56.334Z,1516918256.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:56.642Z,1516918256.642 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010794 psu
2018-01-25T22:10:56.643Z,1516918256.643 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:56.727Z,1516918256.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:57.116Z,1516918257.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:57.245Z,1516918257.245 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010794 psu
2018-01-25T22:10:57.247Z,1516918257.247 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:57.530Z,1516918257.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:57.917Z,1516918257.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:58.316Z,1516918258.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:58.446Z,1516918258.446 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010794 psu
2018-01-25T22:10:58.447Z,1516918258.447 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:58.736Z,1516918258.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:59.129Z,1516918259.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:59.529Z,1516918259.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:10:59.646Z,1516918259.646 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010794 psu
2018-01-25T22:10:59.647Z,1516918259.647 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:10:59.930Z,1516918259.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:00.250Z,1516918260.250 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010793 psu
2018-01-25T22:11:00.251Z,1516918260.251 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:00.326Z,1516918260.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:00.730Z,1516918260.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:01.114Z,1516918261.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:01.450Z,1516918261.450 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010793 psu
2018-01-25T22:11:01.451Z,1516918261.451 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:01.520Z,1516918261.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:01.943Z,1516918261.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:02.327Z,1516918262.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:02.650Z,1516918262.650 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010793 psu
2018-01-25T22:11:02.651Z,1516918262.651 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:02.730Z,1516918262.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:03.118Z,1516918263.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:03.255Z,1516918263.255 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010793 psu
2018-01-25T22:11:03.256Z,1516918263.256 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:03.533Z,1516918263.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:03.921Z,1516918263.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:04.329Z,1516918264.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:04.454Z,1516918264.454 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010793 psu
2018-01-25T22:11:04.455Z,1516918264.455 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:04.731Z,1516918264.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:05.129Z,1516918265.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:05.529Z,1516918265.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:05.654Z,1516918265.654 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010793 psu
2018-01-25T22:11:05.655Z,1516918265.655 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:05.926Z,1516918265.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:06.260Z,1516918266.260 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010793 psu
2018-01-25T22:11:06.261Z,1516918266.261 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:06.330Z,1516918266.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:06.726Z,1516918266.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:07.134Z,1516918267.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:07.463Z,1516918267.463 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010793 psu
2018-01-25T22:11:07.466Z,1516918267.466 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:07.534Z,1516918267.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:07.942Z,1516918267.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:08.340Z,1516918268.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:08.666Z,1516918268.666 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010793 psu
2018-01-25T22:11:08.667Z,1516918268.667 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:08.742Z,1516918268.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:09.114Z,1516918269.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:09.264Z,1516918269.264 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010793 psu
2018-01-25T22:11:09.265Z,1516918269.265 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:09.518Z,1516918269.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:09.922Z,1516918269.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:10.318Z,1516918270.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:10.466Z,1516918270.466 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010793 psu
2018-01-25T22:11:10.467Z,1516918270.467 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:10.744Z,1516918270.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:11.130Z,1516918271.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:11.524Z,1516918271.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:11.666Z,1516918271.666 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010793 psu
2018-01-25T22:11:11.667Z,1516918271.667 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:11.915Z,1516918271.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:12.268Z,1516918272.268 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010793 psu
2018-01-25T22:11:12.270Z,1516918272.270 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:12.327Z,1516918272.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:12.730Z,1516918272.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:13.128Z,1516918273.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:13.478Z,1516918273.478 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010793 psu
2018-01-25T22:11:13.479Z,1516918273.479 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:13.543Z,1516918273.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:13.926Z,1516918273.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:14.342Z,1516918274.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:14.678Z,1516918274.678 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010793 psu
2018-01-25T22:11:14.679Z,1516918274.679 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:14.753Z,1516918274.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:15.121Z,1516918275.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:15.273Z,1516918275.273 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010793 psu
2018-01-25T22:11:15.275Z,1516918275.275 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:15.529Z,1516918275.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:15.922Z,1516918275.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:16.330Z,1516918276.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:16.474Z,1516918276.474 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010793 psu
2018-01-25T22:11:16.475Z,1516918276.475 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:16.737Z,1516918276.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:17.133Z,1516918277.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:17.535Z,1516918277.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:17.674Z,1516918277.674 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010793 psu
2018-01-25T22:11:17.675Z,1516918277.675 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:17.914Z,1516918277.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:18.279Z,1516918278.279 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010793 psu
2018-01-25T22:11:18.290Z,1516918278.290 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:18.346Z,1516918278.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:18.719Z,1516918278.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:19.116Z,1516918279.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:19.490Z,1516918279.490 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010793 psu
2018-01-25T22:11:19.491Z,1516918279.491 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:19.549Z,1516918279.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:19.928Z,1516918279.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:20.338Z,1516918280.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:20.691Z,1516918280.691 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010793 psu
2018-01-25T22:11:20.692Z,1516918280.692 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:20.735Z,1516918280.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:21.134Z,1516918281.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:21.282Z,1516918281.282 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010792 psu
2018-01-25T22:11:21.284Z,1516918281.284 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:21.534Z,1516918281.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:21.910Z,1516918281.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:22.315Z,1516918282.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:22.482Z,1516918282.482 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010793 psu
2018-01-25T22:11:22.483Z,1516918282.483 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:22.741Z,1516918282.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:23.139Z,1516918283.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:23.523Z,1516918283.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:23.682Z,1516918283.682 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010792 psu
2018-01-25T22:11:23.683Z,1516918283.683 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:23.911Z,1516918283.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:24.288Z,1516918284.288 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010792 psu
2018-01-25T22:11:24.289Z,1516918284.289 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:24.339Z,1516918284.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:24.721Z,1516918284.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:25.122Z,1516918285.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:25.490Z,1516918285.490 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010792 psu
2018-01-25T22:11:25.491Z,1516918285.491 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:25.530Z,1516918285.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:25.930Z,1516918285.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:26.333Z,1516918286.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:26.691Z,1516918286.691 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010792 psu
2018-01-25T22:11:26.692Z,1516918286.692 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:26.734Z,1516918286.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:27.122Z,1516918287.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:27.292Z,1516918287.292 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010792 psu
2018-01-25T22:11:27.293Z,1516918287.293 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:27.527Z,1516918287.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:27.917Z,1516918287.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:28.334Z,1516918288.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:28.494Z,1516918288.494 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010792 psu
2018-01-25T22:11:28.495Z,1516918288.495 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:28.725Z,1516918288.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:29.130Z,1516918289.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:29.525Z,1516918289.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:29.694Z,1516918289.694 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010792 psu
2018-01-25T22:11:29.695Z,1516918289.695 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:29.919Z,1516918289.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:30.298Z,1516918290.298 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010792 psu
2018-01-25T22:11:30.299Z,1516918290.299 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:30.350Z,1516918290.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:30.724Z,1516918290.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:31.129Z,1516918291.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:31.498Z,1516918291.498 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010792 psu
2018-01-25T22:11:31.499Z,1516918291.499 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:31.546Z,1516918291.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:31.934Z,1516918291.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:32.698Z,1516918292.698 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010792 psu
2018-01-25T22:11:32.699Z,1516918292.699 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:33.301Z,1516918293.301 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010792 psu
2018-01-25T22:11:33.302Z,1516918293.302 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:34.502Z,1516918294.502 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010792 psu
2018-01-25T22:11:34.503Z,1516918294.503 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:35.187Z,1516918295.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:35.337Z,1516918295.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:35.653Z,1516918295.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:35.702Z,1516918295.702 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010792 psu
2018-01-25T22:11:35.703Z,1516918295.703 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:36.054Z,1516918296.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:36.306Z,1516918296.306 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010792 psu
2018-01-25T22:11:36.307Z,1516918296.307 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:36.448Z,1516918296.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:36.854Z,1516918296.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:37.255Z,1516918297.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:37.506Z,1516918297.506 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010792 psu
2018-01-25T22:11:37.507Z,1516918297.507 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:37.658Z,1516918297.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:38.055Z,1516918298.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:38.454Z,1516918298.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:38.706Z,1516918298.706 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010792 psu
2018-01-25T22:11:38.707Z,1516918298.707 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:38.858Z,1516918298.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:39.247Z,1516918299.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:39.310Z,1516918299.310 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010792 psu
2018-01-25T22:11:39.312Z,1516918299.312 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:39.658Z,1516918299.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:40.062Z,1516918300.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:40.462Z,1516918300.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:40.510Z,1516918300.510 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010791 psu
2018-01-25T22:11:40.511Z,1516918300.511 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:40.861Z,1516918300.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:41.254Z,1516918301.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:41.659Z,1516918301.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:41.710Z,1516918301.710 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010792 psu
2018-01-25T22:11:41.712Z,1516918301.712 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:42.073Z,1516918302.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:42.315Z,1516918302.315 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010792 psu
2018-01-25T22:11:42.316Z,1516918302.316 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:42.463Z,1516918302.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:42.866Z,1516918302.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:43.268Z,1516918303.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:43.514Z,1516918303.514 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010792 psu
2018-01-25T22:11:43.515Z,1516918303.515 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:43.663Z,1516918303.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:44.063Z,1516918304.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:44.469Z,1516918304.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:44.714Z,1516918304.714 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010792 psu
2018-01-25T22:11:44.715Z,1516918304.715 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:44.866Z,1516918304.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:45.266Z,1516918305.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:45.320Z,1516918305.320 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010792 psu
2018-01-25T22:11:45.321Z,1516918305.321 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:45.614Z,1516918305.614 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-25T22:11:45.614Z,1516918305.614 [NAL9602] Data Fault, FailCount= 5
2018-01-25T22:11:45.614Z,1516918305.614 [NAL9602](ERROR): Data Fault
2018-01-25T22:11:45.674Z,1516918305.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:45.687Z,1516918305.687 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-25T22:11:45.687Z,1516918305.687 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-01-25T22:11:46.010Z,1516918306.010 [NAL9602](INFO): Powering down
2018-01-25T22:11:46.046Z,1516918306.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:46.073Z,1516918306.073 [CommandLine](FAULT): Scheduling is paused
2018-01-25T22:11:46.074Z,1516918306.074 [CBIT](INFO): Critical error at 20180125T221145
2018-01-25T22:11:46.074Z,1516918306.074 [Supervisor](INFO): Stop Mission called by CBIT::checkCriticals
2018-01-25T22:11:46.454Z,1516918306.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:46.522Z,1516918306.522 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010792 psu
2018-01-25T22:11:46.523Z,1516918306.523 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:46.848Z,1516918306.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:47.248Z,1516918307.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:47.650Z,1516918307.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:47.723Z,1516918307.723 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010792 psu
2018-01-25T22:11:47.724Z,1516918307.724 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:48.045Z,1516918308.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:48.326Z,1516918308.326 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010792 psu
2018-01-25T22:11:48.327Z,1516918308.327 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:48.447Z,1516918308.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:48.856Z,1516918308.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:49.246Z,1516918309.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:49.528Z,1516918309.528 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010792 psu
2018-01-25T22:11:49.530Z,1516918309.530 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:49.651Z,1516918309.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:50.050Z,1516918310.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:50.454Z,1516918310.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:50.730Z,1516918310.730 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010791 psu
2018-01-25T22:11:50.731Z,1516918310.731 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:50.849Z,1516918310.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:51.257Z,1516918311.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:51.329Z,1516918311.329 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010792 psu
2018-01-25T22:11:51.331Z,1516918311.331 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:51.650Z,1516918311.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:52.057Z,1516918312.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:52.450Z,1516918312.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:52.530Z,1516918312.530 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010791 psu
2018-01-25T22:11:52.531Z,1516918312.531 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:52.854Z,1516918312.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:53.248Z,1516918313.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:53.657Z,1516918313.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:53.730Z,1516918313.730 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010792 psu
2018-01-25T22:11:53.731Z,1516918313.731 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:54.047Z,1516918314.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:54.333Z,1516918314.333 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010792 psu
2018-01-25T22:11:54.335Z,1516918314.335 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:54.448Z,1516918314.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:54.857Z,1516918314.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:55.254Z,1516918315.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:55.534Z,1516918315.534 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010791 psu
2018-01-25T22:11:55.535Z,1516918315.535 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:55.651Z,1516918315.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:56.050Z,1516918316.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:56.454Z,1516918316.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:56.734Z,1516918316.734 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010791 psu
2018-01-25T22:11:56.735Z,1516918316.735 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:56.848Z,1516918316.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:57.258Z,1516918317.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:57.338Z,1516918317.338 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010792 psu
2018-01-25T22:11:57.339Z,1516918317.339 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:57.651Z,1516918317.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:58.047Z,1516918318.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:58.454Z,1516918318.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:58.538Z,1516918318.538 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010791 psu
2018-01-25T22:11:58.539Z,1516918318.539 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:11:58.854Z,1516918318.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:59.250Z,1516918319.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:59.657Z,1516918319.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:11:59.738Z,1516918319.738 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010791 psu
2018-01-25T22:11:59.739Z,1516918319.739 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:00.057Z,1516918320.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:00.343Z,1516918320.343 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010791 psu
2018-01-25T22:12:00.344Z,1516918320.344 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:00.447Z,1516918320.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:00.851Z,1516918320.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:01.254Z,1516918321.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:01.542Z,1516918321.542 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010791 psu
2018-01-25T22:12:01.543Z,1516918321.543 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:01.658Z,1516918321.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:02.059Z,1516918322.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:02.455Z,1516918322.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:02.742Z,1516918322.742 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010791 psu
2018-01-25T22:12:02.743Z,1516918322.743 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:02.847Z,1516918322.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:03.258Z,1516918323.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:03.348Z,1516918323.348 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010791 psu
2018-01-25T22:12:03.349Z,1516918323.349 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:03.651Z,1516918323.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:04.047Z,1516918324.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:04.457Z,1516918324.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:04.550Z,1516918324.550 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010791 psu
2018-01-25T22:12:04.551Z,1516918324.551 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:04.854Z,1516918324.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:05.247Z,1516918325.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:05.650Z,1516918325.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:05.750Z,1516918325.750 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010791 psu
2018-01-25T22:12:05.751Z,1516918325.751 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:06.054Z,1516918326.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:06.352Z,1516918326.352 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010791 psu
2018-01-25T22:12:06.353Z,1516918326.353 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:06.446Z,1516918326.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:06.857Z,1516918326.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:07.254Z,1516918327.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:07.554Z,1516918327.554 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010791 psu
2018-01-25T22:12:07.555Z,1516918327.555 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:07.654Z,1516918327.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:08.057Z,1516918328.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:08.454Z,1516918328.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:08.754Z,1516918328.754 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010791 psu
2018-01-25T22:12:08.755Z,1516918328.755 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:08.846Z,1516918328.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:09.257Z,1516918329.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:09.357Z,1516918329.357 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010791 psu
2018-01-25T22:12:09.358Z,1516918329.358 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:09.654Z,1516918329.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:10.046Z,1516918330.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:10.450Z,1516918330.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:10.558Z,1516918330.558 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010791 psu
2018-01-25T22:12:10.559Z,1516918330.559 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:10.854Z,1516918330.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:11.246Z,1516918331.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:11.651Z,1516918331.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:11.759Z,1516918331.759 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010791 psu
2018-01-25T22:12:11.760Z,1516918331.760 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:12.054Z,1516918332.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:12.361Z,1516918332.361 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010791 psu
2018-01-25T22:12:12.362Z,1516918332.362 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:12.446Z,1516918332.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:12.856Z,1516918332.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:13.250Z,1516918333.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:13.562Z,1516918333.562 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010790 psu
2018-01-25T22:12:13.563Z,1516918333.563 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:13.647Z,1516918333.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:14.050Z,1516918334.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:14.454Z,1516918334.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:14.762Z,1516918334.762 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010791 psu
2018-01-25T22:12:14.763Z,1516918334.763 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:14.846Z,1516918334.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:15.257Z,1516918335.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:15.366Z,1516918335.366 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010791 psu
2018-01-25T22:12:15.367Z,1516918335.367 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:15.654Z,1516918335.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:16.046Z,1516918336.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:16.457Z,1516918336.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:16.566Z,1516918336.566 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010791 psu
2018-01-25T22:12:16.567Z,1516918336.567 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:16.854Z,1516918336.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:17.247Z,1516918337.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:17.656Z,1516918337.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:17.766Z,1516918337.766 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010791 psu
2018-01-25T22:12:17.767Z,1516918337.767 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:18.054Z,1516918338.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:18.398Z,1516918338.398 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010791 psu
2018-01-25T22:12:18.400Z,1516918338.400 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:18.464Z,1516918338.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:18.855Z,1516918338.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:19.258Z,1516918339.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:19.598Z,1516918339.598 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010790 psu
2018-01-25T22:12:19.599Z,1516918339.599 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:19.662Z,1516918339.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:20.058Z,1516918340.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:20.374Z,1516918340.374 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010791 psu
2018-01-25T22:12:20.375Z,1516918340.375 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:20.460Z,1516918340.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:20.846Z,1516918340.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:21.246Z,1516918341.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:21.574Z,1516918341.574 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010791 psu
2018-01-25T22:12:21.575Z,1516918341.575 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:21.666Z,1516918341.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:22.048Z,1516918342.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:22.448Z,1516918342.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:22.774Z,1516918342.774 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010791 psu
2018-01-25T22:12:22.775Z,1516918342.775 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:22.875Z,1516918342.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:23.246Z,1516918343.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:23.378Z,1516918343.378 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010791 psu
2018-01-25T22:12:23.379Z,1516918343.379 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:23.654Z,1516918343.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:24.057Z,1516918344.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:24.447Z,1516918344.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:24.578Z,1516918344.578 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010791 psu
2018-01-25T22:12:24.579Z,1516918344.579 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:24.851Z,1516918344.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:25.257Z,1516918345.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:25.647Z,1516918345.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:25.778Z,1516918345.778 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010790 psu
2018-01-25T22:12:25.779Z,1516918345.779 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:26.051Z,1516918346.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:26.384Z,1516918346.384 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010791 psu
2018-01-25T22:12:26.385Z,1516918346.385 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:26.458Z,1516918346.458 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:26.458Z,1516918346.458 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 18
2018-01-25T22:12:26.458Z,1516918346.458 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-25T22:12:26.460Z,1516918346.460 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:26.460Z,1516918346.460 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18
2018-01-25T22:12:26.460Z,1516918346.460 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-25T22:12:26.462Z,1516918346.462 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:26.462Z,1516918346.462 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2018-01-25T22:12:26.462Z,1516918346.462 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-25T22:12:26.485Z,1516918346.485 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-25T22:12:26.486Z,1516918346.486 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-25T22:12:26.486Z,1516918346.486 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-25T22:12:26.878Z,1516918346.878 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-25T22:12:26.878Z,1516918346.878 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 18
2018-01-25T22:12:26.878Z,1516918346.878 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-25T22:12:26.878Z,1516918346.878 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18
2018-01-25T22:12:26.879Z,1516918346.879 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-25T22:12:26.879Z,1516918346.879 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2018-01-25T22:12:27.245Z,1516918347.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-25T22:12:27.245Z,1516918347.245 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T22:12:27.246Z,1516918347.246 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T22:12:27.246Z,1516918347.246 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-25T22:12:27.247Z,1516918347.247 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T22:12:27.247Z,1516918347.247 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T22:12:27.247Z,1516918347.247 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-25T22:12:27.248Z,1516918347.248 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T22:12:27.248Z,1516918347.248 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T22:12:27.586Z,1516918347.586 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010791 psu
2018-01-25T22:12:27.587Z,1516918347.587 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:27.658Z,1516918347.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-25T22:12:27.659Z,1516918347.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:28.047Z,1516918348.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-25T22:12:28.048Z,1516918348.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:28.447Z,1516918348.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-25T22:12:28.448Z,1516918348.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:28.786Z,1516918348.786 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010790 psu
2018-01-25T22:12:28.787Z,1516918348.787 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:28.878Z,1516918348.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-25T22:12:28.879Z,1516918348.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:29.251Z,1516918349.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-25T22:12:29.252Z,1516918349.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:29.387Z,1516918349.387 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010790 psu
2018-01-25T22:12:29.389Z,1516918349.389 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:29.656Z,1516918349.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-25T22:12:29.657Z,1516918349.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:30.049Z,1516918350.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-25T22:12:30.050Z,1516918350.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:30.446Z,1516918350.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-25T22:12:30.447Z,1516918350.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:30.590Z,1516918350.590 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010791 psu
2018-01-25T22:12:30.591Z,1516918350.591 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:30.851Z,1516918350.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-25T22:12:30.852Z,1516918350.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:31.257Z,1516918351.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-25T22:12:31.258Z,1516918351.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:31.646Z,1516918351.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-25T22:12:31.647Z,1516918351.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:31.790Z,1516918351.790 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010791 psu
2018-01-25T22:12:31.791Z,1516918351.791 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:32.054Z,1516918352.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-25T22:12:32.055Z,1516918352.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:32.392Z,1516918352.392 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010790 psu
2018-01-25T22:12:32.394Z,1516918352.394 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:33.594Z,1516918353.594 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010791 psu
2018-01-25T22:12:33.595Z,1516918353.595 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:34.794Z,1516918354.794 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010790 psu
2018-01-25T22:12:34.795Z,1516918354.795 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:35.282Z,1516918355.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-25T22:12:35.283Z,1516918355.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:35.466Z,1516918355.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.0 s old, using for 20.0 s.
2018-01-25T22:12:35.466Z,1516918355.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:35.763Z,1516918355.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-01-25T22:12:35.764Z,1516918355.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:36.173Z,1516918356.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-01-25T22:12:36.174Z,1516918356.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:36.570Z,1516918356.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-01-25T22:12:36.571Z,1516918356.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:36.790Z,1516918356.790 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010790 psu
2018-01-25T22:12:36.791Z,1516918356.791 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:36.970Z,1516918356.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-01-25T22:12:36.971Z,1516918356.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:37.371Z,1516918357.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-01-25T22:12:37.375Z,1516918357.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:37.400Z,1516918357.400 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010790 psu
2018-01-25T22:12:37.401Z,1516918357.401 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:37.765Z,1516918357.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-01-25T22:12:37.766Z,1516918357.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:38.166Z,1516918358.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-01-25T22:12:38.167Z,1516918358.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:38.569Z,1516918358.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-01-25T22:12:38.570Z,1516918358.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:38.602Z,1516918358.602 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010790 psu
2018-01-25T22:12:38.603Z,1516918358.603 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:38.970Z,1516918358.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-01-25T22:12:38.971Z,1516918358.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:39.375Z,1516918359.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-01-25T22:12:39.376Z,1516918359.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:39.773Z,1516918359.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-01-25T22:12:39.774Z,1516918359.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:39.802Z,1516918359.802 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010790 psu
2018-01-25T22:12:39.803Z,1516918359.803 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:40.167Z,1516918360.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-01-25T22:12:40.168Z,1516918360.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:40.406Z,1516918360.406 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010790 psu
2018-01-25T22:12:40.407Z,1516918360.407 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:40.580Z,1516918360.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-01-25T22:12:40.581Z,1516918360.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:40.977Z,1516918360.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-01-25T22:12:40.978Z,1516918360.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:41.367Z,1516918361.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-01-25T22:12:41.369Z,1516918361.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:41.606Z,1516918361.606 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010790 psu
2018-01-25T22:12:41.607Z,1516918361.607 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:41.772Z,1516918361.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-01-25T22:12:41.773Z,1516918361.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:42.177Z,1516918362.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-01-25T22:12:42.178Z,1516918362.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:42.576Z,1516918362.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-01-25T22:12:42.577Z,1516918362.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:42.806Z,1516918362.806 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010790 psu
2018-01-25T22:12:42.807Z,1516918362.807 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:42.973Z,1516918362.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-01-25T22:12:42.974Z,1516918362.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:43.376Z,1516918363.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-01-25T22:12:43.377Z,1516918363.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:43.412Z,1516918363.412 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010790 psu
2018-01-25T22:12:43.413Z,1516918363.413 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:43.768Z,1516918363.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-01-25T22:12:43.773Z,1516918363.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:44.178Z,1516918364.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-01-25T22:12:44.179Z,1516918364.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:44.579Z,1516918364.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-01-25T22:12:44.580Z,1516918364.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:44.614Z,1516918364.614 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010790 psu
2018-01-25T22:12:44.615Z,1516918364.615 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:44.978Z,1516918364.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-01-25T22:12:44.979Z,1516918364.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:45.378Z,1516918365.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-01-25T22:12:45.379Z,1516918365.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:45.779Z,1516918365.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-01-25T22:12:45.780Z,1516918365.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:45.814Z,1516918365.814 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010790 psu
2018-01-25T22:12:45.815Z,1516918365.815 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:46.159Z,1516918366.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-01-25T22:12:46.169Z,1516918366.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:46.414Z,1516918366.414 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010790 psu
2018-01-25T22:12:46.415Z,1516918366.415 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:46.582Z,1516918366.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:46.986Z,1516918366.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:47.360Z,1516918367.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:47.614Z,1516918367.614 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010790 psu
2018-01-25T22:12:47.615Z,1516918367.615 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:47.789Z,1516918367.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:48.166Z,1516918368.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:48.560Z,1516918368.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:48.814Z,1516918368.814 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010790 psu
2018-01-25T22:12:48.816Z,1516918368.816 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:48.980Z,1516918368.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:49.365Z,1516918369.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:49.419Z,1516918369.419 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010790 psu
2018-01-25T22:12:49.420Z,1516918369.420 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:49.764Z,1516918369.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:50.168Z,1516918370.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:50.568Z,1516918370.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:50.618Z,1516918370.618 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010790 psu
2018-01-25T22:12:50.619Z,1516918370.619 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:50.966Z,1516918370.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:51.368Z,1516918371.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:51.771Z,1516918371.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:51.818Z,1516918371.818 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010789 psu
2018-01-25T22:12:51.819Z,1516918371.819 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:52.168Z,1516918372.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:52.423Z,1516918372.423 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010790 psu
2018-01-25T22:12:52.424Z,1516918372.424 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:52.578Z,1516918372.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:52.979Z,1516918372.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:53.370Z,1516918373.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:53.626Z,1516918373.626 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010790 psu
2018-01-25T22:12:53.627Z,1516918373.627 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:53.783Z,1516918373.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:54.170Z,1516918374.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:54.569Z,1516918374.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:54.826Z,1516918374.826 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010790 psu
2018-01-25T22:12:54.827Z,1516918374.827 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:54.978Z,1516918374.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:55.378Z,1516918375.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:55.428Z,1516918375.428 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010790 psu
2018-01-25T22:12:55.429Z,1516918375.429 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:55.768Z,1516918375.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:56.180Z,1516918376.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:56.580Z,1516918376.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:56.630Z,1516918376.630 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010790 psu
2018-01-25T22:12:56.631Z,1516918376.631 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:56.978Z,1516918376.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:57.377Z,1516918377.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:57.779Z,1516918377.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:57.831Z,1516918377.831 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010789 psu
2018-01-25T22:12:57.832Z,1516918377.832 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:58.160Z,1516918378.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:58.432Z,1516918378.432 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010790 psu
2018-01-25T22:12:58.434Z,1516918378.434 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:58.582Z,1516918378.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:58.987Z,1516918378.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:59.360Z,1516918379.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:12:59.634Z,1516918379.634 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010789 psu
2018-01-25T22:12:59.635Z,1516918379.635 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:12:59.790Z,1516918379.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:00.166Z,1516918380.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:00.560Z,1516918380.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:00.834Z,1516918380.834 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010789 psu
2018-01-25T22:13:00.835Z,1516918380.835 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:00.989Z,1516918380.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:01.385Z,1516918381.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:01.437Z,1516918381.437 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010789 psu
2018-01-25T22:13:01.438Z,1516918381.438 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:01.764Z,1516918381.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:02.170Z,1516918382.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:02.570Z,1516918382.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:02.639Z,1516918382.639 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010789 psu
2018-01-25T22:13:02.640Z,1516918382.640 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:02.971Z,1516918382.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:03.362Z,1516918383.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:03.774Z,1516918383.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:03.838Z,1516918383.838 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010789 psu
2018-01-25T22:13:03.839Z,1516918383.839 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:04.163Z,1516918384.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:04.441Z,1516918384.441 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010789 psu
2018-01-25T22:13:04.443Z,1516918384.443 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:04.567Z,1516918384.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:04.967Z,1516918384.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:05.363Z,1516918385.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:05.642Z,1516918385.642 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010789 psu
2018-01-25T22:13:05.643Z,1516918385.643 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:05.768Z,1516918385.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:06.170Z,1516918386.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:06.566Z,1516918386.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:06.844Z,1516918386.844 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010789 psu
2018-01-25T22:13:06.845Z,1516918386.845 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:06.978Z,1516918386.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:07.378Z,1516918387.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:07.446Z,1516918387.446 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010789 psu
2018-01-25T22:13:07.448Z,1516918387.448 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:07.770Z,1516918387.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:08.173Z,1516918388.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:08.570Z,1516918388.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:08.646Z,1516918388.646 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010789 psu
2018-01-25T22:13:08.647Z,1516918388.647 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:08.970Z,1516918388.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:09.370Z,1516918389.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:09.774Z,1516918389.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:09.846Z,1516918389.846 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010789 psu
2018-01-25T22:13:09.847Z,1516918389.847 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:10.166Z,1516918390.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:10.451Z,1516918390.451 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010789 psu
2018-01-25T22:13:10.452Z,1516918390.452 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:10.571Z,1516918390.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:10.970Z,1516918390.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:11.366Z,1516918391.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:11.650Z,1516918391.650 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010789 psu
2018-01-25T22:13:11.651Z,1516918391.651 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:11.772Z,1516918391.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:12.170Z,1516918392.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:12.567Z,1516918392.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:12.850Z,1516918392.850 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010789 psu
2018-01-25T22:13:12.851Z,1516918392.851 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:12.978Z,1516918392.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:13.370Z,1516918393.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:13.455Z,1516918393.455 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010789 psu
2018-01-25T22:13:13.457Z,1516918393.457 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:13.767Z,1516918393.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:14.175Z,1516918394.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:14.578Z,1516918394.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:14.658Z,1516918394.658 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010789 psu
2018-01-25T22:13:14.659Z,1516918394.659 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:14.967Z,1516918394.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:15.375Z,1516918395.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:15.770Z,1516918395.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:15.858Z,1516918395.858 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010789 psu
2018-01-25T22:13:15.859Z,1516918395.859 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:16.167Z,1516918396.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:16.460Z,1516918396.460 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010789 psu
2018-01-25T22:13:16.461Z,1516918396.461 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:16.580Z,1516918396.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:16.976Z,1516918396.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:17.367Z,1516918397.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:17.662Z,1516918397.662 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010789 psu
2018-01-25T22:13:17.663Z,1516918397.663 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:17.780Z,1516918397.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:18.176Z,1516918398.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:18.567Z,1516918398.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:18.862Z,1516918398.862 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010789 psu
2018-01-25T22:13:18.863Z,1516918398.863 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:18.974Z,1516918398.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:19.376Z,1516918399.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:19.465Z,1516918399.465 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010789 psu
2018-01-25T22:13:19.466Z,1516918399.466 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:19.774Z,1516918399.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:20.175Z,1516918400.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:20.570Z,1516918400.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:20.666Z,1516918400.666 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010789 psu
2018-01-25T22:13:20.667Z,1516918400.667 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:20.976Z,1516918400.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:21.375Z,1516918401.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:21.770Z,1516918401.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:21.866Z,1516918401.866 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010797 psu
2018-01-25T22:13:21.867Z,1516918401.867 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:22.167Z,1516918402.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:22.497Z,1516918402.497 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010789 psu
2018-01-25T22:13:22.499Z,1516918402.499 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:22.580Z,1516918402.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:22.978Z,1516918402.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:23.367Z,1516918403.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:23.701Z,1516918403.701 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010789 psu
2018-01-25T22:13:23.702Z,1516918403.702 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:23.790Z,1516918403.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:24.173Z,1516918404.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:24.472Z,1516918404.472 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010789 psu
2018-01-25T22:13:24.474Z,1516918404.474 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:24.574Z,1516918404.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:24.978Z,1516918404.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:25.377Z,1516918405.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:25.674Z,1516918405.674 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010789 psu
2018-01-25T22:13:25.675Z,1516918405.675 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:25.778Z,1516918405.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:26.166Z,1516918406.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:26.566Z,1516918406.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:26.875Z,1516918406.875 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010789 psu
2018-01-25T22:13:26.878Z,1516918406.878 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:26.986Z,1516918406.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:27.366Z,1516918407.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:27.477Z,1516918407.477 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010789 psu
2018-01-25T22:13:27.478Z,1516918407.478 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:27.774Z,1516918407.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:28.164Z,1516918408.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:28.572Z,1516918408.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:28.678Z,1516918408.678 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:13:28.679Z,1516918408.679 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:28.969Z,1516918408.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:29.368Z,1516918409.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:29.774Z,1516918409.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:29.878Z,1516918409.878 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010789 psu
2018-01-25T22:13:29.879Z,1516918409.879 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:30.164Z,1516918410.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:30.482Z,1516918410.482 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:13:30.483Z,1516918410.483 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:30.569Z,1516918410.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:30.970Z,1516918410.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:31.363Z,1516918411.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:31.683Z,1516918411.683 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:13:31.685Z,1516918411.685 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:31.788Z,1516918411.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:32.173Z,1516918412.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:32.574Z,1516918412.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:32.886Z,1516918412.886 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010789 psu
2018-01-25T22:13:32.887Z,1516918412.887 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:33.486Z,1516918413.486 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010789 psu
2018-01-25T22:13:33.488Z,1516918413.488 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:34.686Z,1516918414.686 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:13:34.687Z,1516918414.687 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:35.809Z,1516918415.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:35.886Z,1516918415.886 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:13:35.887Z,1516918415.887 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:35.962Z,1516918415.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:36.275Z,1516918416.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:36.491Z,1516918416.491 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010789 psu
2018-01-25T22:13:36.492Z,1516918416.492 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:36.678Z,1516918416.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:37.074Z,1516918417.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:37.507Z,1516918417.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:37.690Z,1516918417.690 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:13:37.691Z,1516918417.691 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:37.880Z,1516918417.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:38.272Z,1516918418.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:38.671Z,1516918418.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:38.890Z,1516918418.890 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010789 psu
2018-01-25T22:13:38.891Z,1516918418.891 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:39.070Z,1516918419.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:39.496Z,1516918419.496 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:13:39.497Z,1516918419.497 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:39.502Z,1516918419.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:39.882Z,1516918419.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:40.280Z,1516918420.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:40.681Z,1516918420.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:40.698Z,1516918420.698 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010789 psu
2018-01-25T22:13:40.699Z,1516918420.699 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:41.086Z,1516918421.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:41.514Z,1516918421.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:41.864Z,1516918421.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:41.898Z,1516918421.898 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:13:41.899Z,1516918421.899 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:42.274Z,1516918422.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:42.500Z,1516918422.500 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:13:42.502Z,1516918422.502 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:42.674Z,1516918422.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:43.072Z,1516918423.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:43.471Z,1516918423.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:43.702Z,1516918423.702 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:13:43.703Z,1516918423.703 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:43.878Z,1516918423.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:44.271Z,1516918424.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:44.674Z,1516918424.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:44.902Z,1516918424.902 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:13:44.903Z,1516918424.903 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:45.070Z,1516918425.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:45.478Z,1516918425.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:45.508Z,1516918425.508 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010789 psu
2018-01-25T22:13:45.509Z,1516918425.509 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:45.872Z,1516918425.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:45.885Z,1516918425.885 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-25T22:13:45.885Z,1516918425.885 [NAL9602] No Fault, FailCount= 5
2018-01-25T22:13:46.234Z,1516918426.234 [NAL9602](INFO): Powering up NAL9602
2018-01-25T22:13:46.287Z,1516918426.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:46.672Z,1516918426.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:46.710Z,1516918426.710 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010789 psu
2018-01-25T22:13:46.711Z,1516918426.711 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:47.076Z,1516918427.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:47.509Z,1516918427.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:47.882Z,1516918427.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:47.910Z,1516918427.910 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:13:47.912Z,1516918427.912 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:48.282Z,1516918428.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:48.509Z,1516918428.509 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:13:48.511Z,1516918428.511 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:48.685Z,1516918428.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:49.064Z,1516918429.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:49.494Z,1516918429.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:49.710Z,1516918429.710 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:13:49.711Z,1516918429.711 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:49.882Z,1516918429.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:50.272Z,1516918430.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:50.680Z,1516918430.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:50.910Z,1516918430.910 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:13:50.911Z,1516918430.911 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:51.082Z,1516918431.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:51.472Z,1516918431.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:51.524Z,1516918431.524 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:13:51.526Z,1516918431.526 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:51.876Z,1516918431.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:52.278Z,1516918432.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:52.672Z,1516918432.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:52.726Z,1516918432.726 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:13:52.727Z,1516918432.727 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:53.083Z,1516918433.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:53.484Z,1516918433.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:53.864Z,1516918433.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:53.926Z,1516918433.926 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:13:53.927Z,1516918433.927 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:54.286Z,1516918434.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:54.519Z,1516918434.519 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:13:54.520Z,1516918434.520 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:54.689Z,1516918434.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:55.064Z,1516918435.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:55.470Z,1516918435.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:55.718Z,1516918435.718 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:13:55.719Z,1516918435.719 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:55.870Z,1516918435.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:56.268Z,1516918436.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:56.679Z,1516918436.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:56.918Z,1516918436.918 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:13:56.919Z,1516918436.919 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:57.042Z,1516918437.042 [NAL9602](INFO): NAL9602 initialized
2018-01-25T22:13:57.072Z,1516918437.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:57.472Z,1516918437.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:57.524Z,1516918437.524 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:13:57.525Z,1516918437.525 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:57.875Z,1516918437.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:58.284Z,1516918438.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:58.682Z,1516918438.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:58.726Z,1516918438.726 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:13:58.727Z,1516918438.727 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:13:59.076Z,1516918439.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:59.476Z,1516918439.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:59.880Z,1516918439.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:13:59.926Z,1516918439.926 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:13:59.927Z,1516918439.927 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:00.283Z,1516918440.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:00.528Z,1516918440.528 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:14:00.529Z,1516918440.529 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:00.686Z,1516918440.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:01.083Z,1516918441.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:01.472Z,1516918441.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:01.730Z,1516918441.730 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:14:01.731Z,1516918441.731 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:01.885Z,1516918441.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:02.284Z,1516918442.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:02.678Z,1516918442.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:02.930Z,1516918442.930 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:14:02.931Z,1516918442.931 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:03.092Z,1516918443.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:03.488Z,1516918443.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:03.533Z,1516918443.533 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:14:03.534Z,1516918443.534 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:03.889Z,1516918443.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:04.285Z,1516918444.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:04.665Z,1516918444.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:04.734Z,1516918444.734 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:14:04.735Z,1516918444.735 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:05.070Z,1516918445.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:05.470Z,1516918445.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:05.876Z,1516918445.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:05.935Z,1516918445.935 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:14:05.937Z,1516918445.937 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:06.279Z,1516918446.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:06.538Z,1516918446.538 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:14:06.539Z,1516918446.539 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:06.683Z,1516918446.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:07.075Z,1516918447.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:07.468Z,1516918447.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:07.739Z,1516918447.739 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:14:07.740Z,1516918447.740 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:07.876Z,1516918447.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:08.272Z,1516918448.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:08.681Z,1516918448.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:08.938Z,1516918448.938 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:14:08.939Z,1516918448.939 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:09.080Z,1516918449.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:09.489Z,1516918449.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:09.542Z,1516918449.542 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:14:09.543Z,1516918449.543 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:09.881Z,1516918449.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:10.283Z,1516918450.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:10.671Z,1516918450.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:10.742Z,1516918450.742 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:14:10.743Z,1516918450.743 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:11.080Z,1516918451.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:11.481Z,1516918451.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:11.882Z,1516918451.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:11.942Z,1516918451.942 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:14:11.943Z,1516918451.943 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:12.294Z,1516918452.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:12.547Z,1516918452.547 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:14:12.548Z,1516918452.548 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:12.688Z,1516918452.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:13.122Z,1516918453.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:13.472Z,1516918453.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:13.746Z,1516918453.746 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:14:13.747Z,1516918453.747 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:13.885Z,1516918453.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:14.282Z,1516918454.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:14.679Z,1516918454.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:14.946Z,1516918454.946 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:14:14.947Z,1516918454.947 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:15.098Z,1516918455.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:15.486Z,1516918455.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:15.551Z,1516918455.551 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:14:15.553Z,1516918455.553 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:15.883Z,1516918455.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:16.285Z,1516918456.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:16.677Z,1516918456.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:16.754Z,1516918456.754 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:14:16.755Z,1516918456.755 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:17.088Z,1516918457.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:17.482Z,1516918457.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:17.870Z,1516918457.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:17.954Z,1516918457.954 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:14:17.955Z,1516918457.955 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:18.291Z,1516918458.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:18.556Z,1516918458.556 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:14:18.557Z,1516918458.557 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:18.698Z,1516918458.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:19.080Z,1516918459.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:19.477Z,1516918459.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:19.758Z,1516918459.758 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:14:19.759Z,1516918459.759 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:19.871Z,1516918459.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:20.273Z,1516918460.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:20.683Z,1516918460.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:20.958Z,1516918460.958 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:14:20.959Z,1516918460.959 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:21.077Z,1516918461.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:21.480Z,1516918461.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:21.560Z,1516918461.560 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:14:21.562Z,1516918461.562 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:21.880Z,1516918461.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:22.278Z,1516918462.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:22.675Z,1516918462.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:22.762Z,1516918462.762 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:14:22.763Z,1516918462.763 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:23.076Z,1516918463.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:23.478Z,1516918463.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:23.873Z,1516918463.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:23.962Z,1516918463.962 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:14:23.963Z,1516918463.963 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:24.294Z,1516918464.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:24.565Z,1516918464.565 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:14:24.566Z,1516918464.566 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:24.694Z,1516918464.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:25.083Z,1516918465.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:25.473Z,1516918465.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:25.766Z,1516918465.766 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:14:25.767Z,1516918465.767 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:25.889Z,1516918465.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:26.281Z,1516918466.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:26.672Z,1516918466.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:26.966Z,1516918466.966 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:14:26.967Z,1516918466.967 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:27.082Z,1516918467.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:27.487Z,1516918467.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:27.570Z,1516918467.570 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:14:27.571Z,1516918467.571 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:27.885Z,1516918467.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:28.282Z,1516918468.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:28.673Z,1516918468.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:28.770Z,1516918468.770 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:14:28.771Z,1516918468.771 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:29.085Z,1516918469.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:29.483Z,1516918469.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:29.873Z,1516918469.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:29.970Z,1516918469.970 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:14:29.971Z,1516918469.971 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:30.286Z,1516918470.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:30.574Z,1516918470.574 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:14:30.576Z,1516918470.576 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:30.685Z,1516918470.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:31.082Z,1516918471.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:31.472Z,1516918471.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:31.475Z,1516918471.475 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-25T22:14:31.475Z,1516918471.475 [Default:CheckIn:C.Wait] Stopped
2018-01-25T22:14:31.476Z,1516918471.476 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-25T22:14:31.476Z,1516918471.476 [Default:CheckIn:D] Running Loop=1
2018-01-25T22:14:31.774Z,1516918471.774 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:14:31.775Z,1516918471.775 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:31.888Z,1516918471.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:31.891Z,1516918471.891 [Default:CheckIn:D] Stopped
2018-01-25T22:14:31.892Z,1516918471.892 [Default:CheckIn:E] Running Loop=1
2018-01-25T22:14:32.279Z,1516918472.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:32.283Z,1516918472.283 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 52.217424 min 
2018-01-25T22:14:32.283Z,1516918472.283 [Default:CheckIn:E] Stopped
2018-01-25T22:14:32.283Z,1516918472.283 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-25T22:14:32.283Z,1516918472.283 [Default:CheckIn] Stopped
2018-01-25T22:14:32.283Z,1516918472.283 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-25T22:14:32.283Z,1516918472.283 [Default:CheckIn](INFO): Running loop #6
2018-01-25T22:14:32.283Z,1516918472.283 [Default:CheckIn] Running Loop=6
2018-01-25T22:14:32.284Z,1516918472.284 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-25T22:14:32.284Z,1516918472.284 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-25T22:14:32.974Z,1516918472.974 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:14:32.975Z,1516918472.975 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:33.579Z,1516918473.579 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:14:33.581Z,1516918473.581 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:34.782Z,1516918474.782 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:14:34.784Z,1516918474.784 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:35.522Z,1516918475.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:35.670Z,1516918475.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:35.983Z,1516918475.983 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:14:35.985Z,1516918475.985 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:35.996Z,1516918475.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:36.402Z,1516918476.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:36.584Z,1516918476.584 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:14:36.585Z,1516918476.585 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:36.785Z,1516918476.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:37.190Z,1516918477.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:37.612Z,1516918477.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:37.786Z,1516918477.786 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:14:37.787Z,1516918477.787 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:37.000Z,1516918478.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:38.398Z,1516918478.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:38.794Z,1516918478.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:38.986Z,1516918478.986 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010788 psu
2018-01-25T22:14:38.987Z,1516918478.987 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:39.198Z,1516918479.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:39.596Z,1516918479.596 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:14:39.597Z,1516918479.597 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:39.603Z,1516918479.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:39.999Z,1516918479.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:40.408Z,1516918480.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:40.798Z,1516918480.798 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:14:40.799Z,1516918480.799 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:40.801Z,1516918480.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:41.183Z,1516918481.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:41.592Z,1516918481.592 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:14:41.593Z,1516918481.593 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:41.618Z,1516918481.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:41.988Z,1516918481.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:42.394Z,1516918482.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:42.794Z,1516918482.794 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:14:42.795Z,1516918482.795 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:42.854Z,1516918482.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:43.190Z,1516918483.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:43.612Z,1516918483.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:43.998Z,1516918483.998 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:14:43.000Z,1516918484.000 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:44.011Z,1516918484.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:44.430Z,1516918484.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:44.596Z,1516918484.596 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:14:44.598Z,1516918484.598 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:44.803Z,1516918484.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:45.199Z,1516918485.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:45.637Z,1516918485.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:45.798Z,1516918485.798 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:14:45.799Z,1516918485.799 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:46.002Z,1516918486.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:46.408Z,1516918486.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:46.811Z,1516918486.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:46.998Z,1516918486.998 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:14:46.999Z,1516918486.999 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:47.198Z,1516918487.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:47.630Z,1516918487.630 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:14:47.631Z,1516918487.631 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:47.655Z,1516918487.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:48.019Z,1516918488.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:48.422Z,1516918488.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:48.814Z,1516918488.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:48.830Z,1516918488.830 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:14:48.832Z,1516918488.832 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:49.224Z,1516918489.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:49.604Z,1516918489.604 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:14:49.605Z,1516918489.605 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:49.663Z,1516918489.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:50.010Z,1516918490.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:50.418Z,1516918490.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:50.806Z,1516918490.806 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:14:50.807Z,1516918490.807 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:50.818Z,1516918490.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:51.211Z,1516918491.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:51.634Z,1516918491.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:52.006Z,1516918492.006 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:14:52.007Z,1516918492.007 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:52.017Z,1516918492.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:52.419Z,1516918492.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:52.609Z,1516918492.609 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:14:52.610Z,1516918492.610 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:52.821Z,1516918492.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:53.191Z,1516918493.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:53.627Z,1516918493.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:53.811Z,1516918493.811 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:14:53.812Z,1516918493.812 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:53.993Z,1516918493.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:54.402Z,1516918494.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:54.802Z,1516918494.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:55.012Z,1516918495.012 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:14:55.014Z,1516918495.014 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:55.192Z,1516918495.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:55.615Z,1516918495.615 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:14:55.617Z,1516918495.617 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:55.623Z,1516918495.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:55.000Z,1516918496.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:56.406Z,1516918496.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:56.814Z,1516918496.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:56.818Z,1516918496.818 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:14:56.819Z,1516918496.819 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:57.186Z,1516918497.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:57.585Z,1516918497.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:57.994Z,1516918497.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:58.018Z,1516918498.018 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:14:58.019Z,1516918498.019 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:58.398Z,1516918498.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:58.618Z,1516918498.618 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:14:58.619Z,1516918498.619 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:58.798Z,1516918498.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:59.197Z,1516918499.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:59.584Z,1516918499.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:14:59.818Z,1516918499.818 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:14:59.819Z,1516918499.819 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:14:59.989Z,1516918499.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:00.396Z,1516918500.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:00.798Z,1516918500.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:01.018Z,1516918501.018 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:15:01.019Z,1516918501.019 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:01.200Z,1516918501.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:01.618Z,1516918501.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:01.622Z,1516918501.622 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:15:01.624Z,1516918501.624 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:01.977Z,1516918501.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:02.383Z,1516918502.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:02.782Z,1516918502.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:02.822Z,1516918502.822 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:15:02.823Z,1516918502.823 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:03.211Z,1516918503.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:03.630Z,1516918503.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:03.994Z,1516918503.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:04.022Z,1516918504.022 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:15:04.023Z,1516918504.023 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:04.393Z,1516918504.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:04.627Z,1516918504.627 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:15:04.628Z,1516918504.628 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:04.792Z,1516918504.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:05.196Z,1516918505.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:05.587Z,1516918505.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:05.826Z,1516918505.826 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:15:05.827Z,1516918505.827 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:05.986Z,1516918505.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:06.404Z,1516918506.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:06.799Z,1516918506.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:07.026Z,1516918507.026 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:15:07.027Z,1516918507.027 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:07.200Z,1516918507.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:07.606Z,1516918507.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:07.632Z,1516918507.632 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:15:07.633Z,1516918507.633 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:08.002Z,1516918508.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:08.394Z,1516918508.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:08.803Z,1516918508.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:08.834Z,1516918508.834 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:15:08.835Z,1516918508.835 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:09.205Z,1516918509.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:09.631Z,1516918509.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:10.020Z,1516918510.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:10.034Z,1516918510.034 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:15:10.035Z,1516918510.035 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:10.057Z,1516918510.057 [CommandLine](IMPORTANT): got command show variable median
2018-01-25T22:15:10.250Z,1516918510.250 [CommandLine](IMPORTANT): CTD_Seabird.bin_median_sea_water_electrical_conductivity (millimho_per_centimeter)
2018-01-25T22:15:10.250Z,1516918510.250 [CommandLine](IMPORTANT): CTD_Seabird.bin_median_sea_water_temperature (celsius)
2018-01-25T22:15:10.251Z,1516918510.251 [CommandLine](IMPORTANT): CTD_Seabird.bin_median_sea_water_salinity (practical_salinity_unit)
2018-01-25T22:15:10.251Z,1516918510.251 [CommandLine](IMPORTANT): WetLabsBB2FL.bin_median_mass_concentration_of_chlorophyll_in_sea_water (microgram_per_liter)
2018-01-25T22:15:10.388Z,1516918510.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:10.636Z,1516918510.636 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:15:10.638Z,1516918510.638 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:10.789Z,1516918510.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:11.194Z,1516918511.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:11.589Z,1516918511.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:11.838Z,1516918511.838 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:15:11.839Z,1516918511.839 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:11.996Z,1516918511.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:12.396Z,1516918512.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:12.799Z,1516918512.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:13.038Z,1516918513.038 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:15:13.039Z,1516918513.039 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:13.215Z,1516918513.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:13.642Z,1516918513.642 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:15:13.643Z,1516918513.643 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:13.678Z,1516918513.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:14.008Z,1516918514.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:14.379Z,1516918514.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:14.783Z,1516918514.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:14.842Z,1516918514.842 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:15:14.843Z,1516918514.843 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:15.214Z,1516918515.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:15.615Z,1516918515.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:15.644Z,1516918515.644 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:15:15.645Z,1516918515.645 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:15.995Z,1516918515.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:16.383Z,1516918516.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:16.786Z,1516918516.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:16.846Z,1516918516.846 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:15:16.847Z,1516918516.847 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:17.193Z,1516918517.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:17.595Z,1516918517.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:17.985Z,1516918517.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:18.046Z,1516918518.046 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:15:18.047Z,1516918518.047 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:18.402Z,1516918518.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:18.649Z,1516918518.649 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:15:18.650Z,1516918518.650 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:18.798Z,1516918518.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:19.202Z,1516918519.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:19.594Z,1516918519.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:19.850Z,1516918519.850 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:15:19.851Z,1516918519.851 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:19.989Z,1516918519.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:20.392Z,1516918520.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:20.794Z,1516918520.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:21.050Z,1516918521.050 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:15:21.051Z,1516918521.051 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:21.202Z,1516918521.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:21.600Z,1516918521.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:21.654Z,1516918521.654 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:15:21.656Z,1516918521.656 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:22.003Z,1516918522.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:22.396Z,1516918522.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:22.796Z,1516918522.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:22.854Z,1516918522.854 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:15:22.855Z,1516918522.855 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:23.206Z,1516918523.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:23.584Z,1516918523.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:23.985Z,1516918523.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:24.054Z,1516918524.054 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:15:24.055Z,1516918524.055 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:24.413Z,1516918524.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:24.658Z,1516918524.658 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010787 psu
2018-01-25T22:15:24.659Z,1516918524.659 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:24.813Z,1516918524.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:25.215Z,1516918525.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:25.584Z,1516918525.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:25.858Z,1516918525.858 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:15:25.859Z,1516918525.859 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:25.986Z,1516918525.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:26.387Z,1516918526.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:26.789Z,1516918526.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:27.058Z,1516918527.058 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:15:27.059Z,1516918527.059 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:27.202Z,1516918527.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:27.602Z,1516918527.602 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:27.602Z,1516918527.602 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 19
2018-01-25T22:15:27.602Z,1516918527.602 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-25T22:15:27.604Z,1516918527.604 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:27.604Z,1516918527.604 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19
2018-01-25T22:15:27.604Z,1516918527.604 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-25T22:15:27.606Z,1516918527.606 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:27.606Z,1516918527.606 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2018-01-25T22:15:27.606Z,1516918527.606 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-25T22:15:27.618Z,1516918527.618 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-25T22:15:27.618Z,1516918527.618 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-25T22:15:27.618Z,1516918527.618 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-25T22:15:27.663Z,1516918527.663 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:15:27.664Z,1516918527.664 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:28.020Z,1516918528.020 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-25T22:15:28.020Z,1516918528.020 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 19
2018-01-25T22:15:28.021Z,1516918528.021 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-25T22:15:28.021Z,1516918528.021 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19
2018-01-25T22:15:28.021Z,1516918528.021 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-25T22:15:28.021Z,1516918528.021 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2018-01-25T22:15:28.375Z,1516918528.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-25T22:15:28.376Z,1516918528.376 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T22:15:28.376Z,1516918528.376 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T22:15:28.377Z,1516918528.377 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-25T22:15:28.377Z,1516918528.377 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T22:15:28.377Z,1516918528.377 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T22:15:28.378Z,1516918528.378 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-25T22:15:28.378Z,1516918528.378 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T22:15:28.379Z,1516918528.379 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T22:15:28.794Z,1516918528.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-25T22:15:28.795Z,1516918528.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:28.863Z,1516918528.863 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:15:28.865Z,1516918528.865 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:29.192Z,1516918529.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-25T22:15:29.197Z,1516918529.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:29.585Z,1516918529.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-25T22:15:29.586Z,1516918529.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:29.990Z,1516918529.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-25T22:15:29.991Z,1516918529.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:30.066Z,1516918530.066 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:15:30.067Z,1516918530.067 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:30.402Z,1516918530.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-25T22:15:30.403Z,1516918530.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:30.695Z,1516918530.695 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:15:30.696Z,1516918530.696 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:30.798Z,1516918530.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-25T22:15:30.798Z,1516918530.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:30.961Z,1516918530.961 [CommandLine](IMPORTANT): got command show variable median
2018-01-25T22:15:31.047Z,1516918531.047 [CommandLine](IMPORTANT): CTD_Seabird.bin_median_sea_water_electrical_conductivity (millimho_per_centimeter)
2018-01-25T22:15:31.047Z,1516918531.047 [CommandLine](IMPORTANT): CTD_Seabird.bin_median_sea_water_temperature (celsius)
2018-01-25T22:15:31.048Z,1516918531.048 [CommandLine](IMPORTANT): CTD_Seabird.bin_median_sea_water_salinity (practical_salinity_unit)
2018-01-25T22:15:31.048Z,1516918531.048 [CommandLine](IMPORTANT): WetLabsBB2FL.bin_median_mass_concentration_of_chlorophyll_in_sea_water (microgram_per_liter)
2018-01-25T22:15:31.209Z,1516918531.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-25T22:15:31.210Z,1516918531.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:31.596Z,1516918531.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-25T22:15:31.597Z,1516918531.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:31.898Z,1516918531.898 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:15:31.899Z,1516918531.899 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:31.994Z,1516918531.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-25T22:15:31.995Z,1516918531.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:32.385Z,1516918532.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-25T22:15:32.386Z,1516918532.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:32.670Z,1516918532.670 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:15:32.671Z,1516918532.671 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:33.870Z,1516918533.870 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:15:33.871Z,1516918533.871 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:35.070Z,1516918535.070 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:15:35.071Z,1516918535.071 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:35.630Z,1516918535.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-25T22:15:35.631Z,1516918535.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:35.675Z,1516918535.675 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:15:35.676Z,1516918535.676 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:35.810Z,1516918535.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.2 s old, using for 20.0 s.
2018-01-25T22:15:35.811Z,1516918535.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:36.140Z,1516918536.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-01-25T22:15:36.141Z,1516918536.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:36.537Z,1516918536.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-01-25T22:15:36.538Z,1516918536.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:36.878Z,1516918536.878 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:15:36.879Z,1516918536.879 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:36.946Z,1516918536.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-01-25T22:15:36.947Z,1516918536.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:37.309Z,1516918537.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-01-25T22:15:37.310Z,1516918537.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:37.715Z,1516918537.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-01-25T22:15:37.716Z,1516918537.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:38.078Z,1516918538.078 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:15:38.079Z,1516918538.079 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:38.159Z,1516918538.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.6 s old, using for 20.0 s.
2018-01-25T22:15:38.160Z,1516918538.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:38.524Z,1516918538.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-01-25T22:15:38.525Z,1516918538.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:38.679Z,1516918538.679 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:15:38.681Z,1516918538.681 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:38.934Z,1516918538.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-01-25T22:15:38.935Z,1516918538.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:39.325Z,1516918539.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-01-25T22:15:39.326Z,1516918539.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:39.722Z,1516918539.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-01-25T22:15:39.723Z,1516918539.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:39.882Z,1516918539.882 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:15:39.883Z,1516918539.883 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:40.130Z,1516918540.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-01-25T22:15:40.131Z,1516918540.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:40.525Z,1516918540.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-01-25T22:15:40.526Z,1516918540.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:40.916Z,1516918540.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-01-25T22:15:40.917Z,1516918540.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:41.083Z,1516918541.083 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:15:41.084Z,1516918541.084 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:41.359Z,1516918541.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.8 s old, using for 20.0 s.
2018-01-25T22:15:41.360Z,1516918541.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:41.684Z,1516918541.684 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:15:41.686Z,1516918541.686 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:41.757Z,1516918541.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.2 s old, using for 20.0 s.
2018-01-25T22:15:41.758Z,1516918541.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:42.138Z,1516918542.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-01-25T22:15:42.139Z,1516918542.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:42.541Z,1516918542.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-01-25T22:15:42.542Z,1516918542.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:42.889Z,1516918542.889 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:15:42.891Z,1516918542.891 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:42.954Z,1516918542.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2018-01-25T22:15:42.955Z,1516918542.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:43.320Z,1516918543.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-01-25T22:15:43.321Z,1516918543.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:43.346Z,1516918543.346 [CommandLine](IMPORTANT): got command report mod CTD_Seabird.bin_median_sea_water_salinity
2018-01-25T22:15:43.728Z,1516918543.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-01-25T22:15:43.729Z,1516918543.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:43.743Z,1516918543.743 [Reporter](INFO): CTD_Seabird.bin_median_sea_water_salinity no_value
2018-01-25T22:15:44.102Z,1516918544.102 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:15:44.122Z,1516918544.122 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:44.130Z,1516918544.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-01-25T22:15:44.131Z,1516918544.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:44.529Z,1516918544.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-01-25T22:15:44.530Z,1516918544.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:44.689Z,1516918544.689 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:15:44.690Z,1516918544.690 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:44.942Z,1516918544.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-01-25T22:15:44.943Z,1516918544.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:45.322Z,1516918545.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-01-25T22:15:45.323Z,1516918545.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:45.728Z,1516918545.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-01-25T22:15:45.729Z,1516918545.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:45.890Z,1516918545.890 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:15:45.891Z,1516918545.891 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:46.142Z,1516918546.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-01-25T22:15:46.143Z,1516918546.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:46.529Z,1516918546.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-01-25T22:15:46.530Z,1516918546.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:46.931Z,1516918546.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-01-25T22:15:46.932Z,1516918546.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:47.090Z,1516918547.090 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:15:47.091Z,1516918547.091 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:47.329Z,1516918547.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-01-25T22:15:47.330Z,1516918547.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:47.697Z,1516918547.697 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:15:47.698Z,1516918547.698 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:47.755Z,1516918547.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:48.138Z,1516918548.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:48.541Z,1516918548.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:48.898Z,1516918548.898 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:15:48.899Z,1516918548.899 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:48.946Z,1516918548.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:49.314Z,1516918549.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:49.745Z,1516918549.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:50.098Z,1516918550.098 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:15:50.099Z,1516918550.099 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:50.147Z,1516918550.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:50.524Z,1516918550.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:50.698Z,1516918550.698 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:15:50.699Z,1516918550.699 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:50.950Z,1516918550.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:51.323Z,1516918551.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:51.744Z,1516918551.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:51.898Z,1516918551.898 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:15:51.899Z,1516918551.899 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:52.124Z,1516918552.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:52.523Z,1516918552.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:52.926Z,1516918552.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:53.098Z,1516918553.098 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:15:53.099Z,1516918553.099 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:53.330Z,1516918553.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:53.704Z,1516918553.704 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:15:53.705Z,1516918553.705 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:53.734Z,1516918553.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:54.134Z,1516918554.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:54.533Z,1516918554.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:54.906Z,1516918554.906 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:15:54.907Z,1516918554.907 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:54.928Z,1516918554.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:55.326Z,1516918555.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:55.732Z,1516918555.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:56.106Z,1516918556.106 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:15:56.107Z,1516918556.107 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:56.158Z,1516918556.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:56.531Z,1516918556.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:56.707Z,1516918556.707 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:15:56.709Z,1516918556.709 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:56.934Z,1516918556.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:57.327Z,1516918557.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:57.730Z,1516918557.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:57.911Z,1516918557.911 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:15:57.913Z,1516918557.913 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:58.135Z,1516918558.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:58.533Z,1516918558.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:58.935Z,1516918558.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:59.114Z,1516918559.114 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:15:59.115Z,1516918559.115 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:59.331Z,1516918559.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:15:59.720Z,1516918559.720 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:15:59.721Z,1516918559.721 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:15:59.744Z,1516918559.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:00.139Z,1516918560.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:00.535Z,1516918560.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:00.922Z,1516918560.922 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:00.923Z,1516918560.923 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:00.942Z,1516918560.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:01.314Z,1516918561.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:01.715Z,1516918561.715 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:01.717Z,1516918561.717 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:01.751Z,1516918561.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:02.143Z,1516918562.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:02.546Z,1516918562.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:02.918Z,1516918562.918 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:02.919Z,1516918562.919 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:02.923Z,1516918562.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:03.325Z,1516918563.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:03.738Z,1516918563.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:04.118Z,1516918564.118 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:04.120Z,1516918564.120 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:04.132Z,1516918564.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:04.542Z,1516918564.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:04.719Z,1516918564.719 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:04.721Z,1516918564.721 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:04.939Z,1516918564.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:05.326Z,1516918565.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:05.739Z,1516918565.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:05.922Z,1516918565.922 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:05.923Z,1516918565.923 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:06.135Z,1516918566.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:06.542Z,1516918566.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:06.928Z,1516918566.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:07.122Z,1516918567.122 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:07.123Z,1516918567.123 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:07.331Z,1516918567.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:07.724Z,1516918567.724 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:07.726Z,1516918567.726 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:07.757Z,1516918567.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:08.135Z,1516918568.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:08.535Z,1516918568.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:08.926Z,1516918568.926 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:08.927Z,1516918568.927 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:08.951Z,1516918568.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:09.316Z,1516918569.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:09.747Z,1516918569.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:10.126Z,1516918570.126 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:10.127Z,1516918570.127 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:10.130Z,1516918570.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:10.528Z,1516918570.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:10.729Z,1516918570.729 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:10.730Z,1516918570.730 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:10.934Z,1516918570.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:11.322Z,1516918571.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:11.739Z,1516918571.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:11.930Z,1516918571.930 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:11.931Z,1516918571.931 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:12.126Z,1516918572.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:12.534Z,1516918572.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:12.925Z,1516918572.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:13.130Z,1516918573.130 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:13.131Z,1516918573.131 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:13.322Z,1516918573.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:13.734Z,1516918573.734 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:13.736Z,1516918573.736 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:13.758Z,1516918573.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:14.129Z,1516918574.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:14.529Z,1516918574.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:14.934Z,1516918574.934 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:14.935Z,1516918574.935 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:14.937Z,1516918574.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:15.323Z,1516918575.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:15.745Z,1516918575.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:16.134Z,1516918576.134 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:16.135Z,1516918576.135 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:16.140Z,1516918576.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:16.530Z,1516918576.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:16.738Z,1516918576.738 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:16.739Z,1516918576.739 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:16.933Z,1516918576.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:17.329Z,1516918577.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:17.749Z,1516918577.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:17.938Z,1516918577.938 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:17.939Z,1516918577.939 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:18.131Z,1516918578.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:18.538Z,1516918578.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:18.928Z,1516918578.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:19.138Z,1516918579.138 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:19.139Z,1516918579.139 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:19.331Z,1516918579.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:19.743Z,1516918579.743 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:19.745Z,1516918579.745 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:19.750Z,1516918579.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:20.132Z,1516918580.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:20.533Z,1516918580.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:20.937Z,1516918580.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:20.946Z,1516918580.946 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:20.947Z,1516918580.947 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:21.309Z,1516918581.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:21.714Z,1516918581.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:22.114Z,1516918582.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:22.146Z,1516918582.146 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:22.147Z,1516918582.147 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:22.523Z,1516918582.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:22.747Z,1516918582.747 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:22.749Z,1516918582.749 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:22.927Z,1516918582.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:23.326Z,1516918583.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:23.719Z,1516918583.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:23.950Z,1516918583.950 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:23.951Z,1516918583.951 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:24.127Z,1516918584.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:24.516Z,1516918584.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:24.925Z,1516918584.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:25.150Z,1516918585.150 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:25.151Z,1516918585.151 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:25.324Z,1516918585.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:25.752Z,1516918585.752 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:25.754Z,1516918585.754 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:25.755Z,1516918585.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:26.126Z,1516918586.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:26.518Z,1516918586.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:26.922Z,1516918586.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:26.954Z,1516918586.954 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:26.955Z,1516918586.955 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:27.325Z,1516918587.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:27.730Z,1516918587.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:28.122Z,1516918588.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:28.154Z,1516918588.154 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:28.155Z,1516918588.155 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:28.527Z,1516918588.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:28.757Z,1516918588.757 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:28.759Z,1516918588.759 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:28.930Z,1516918588.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:29.335Z,1516918589.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:29.719Z,1516918589.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:29.958Z,1516918589.958 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:29.959Z,1516918589.959 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:30.129Z,1516918590.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:30.519Z,1516918590.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:30.917Z,1516918590.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:31.158Z,1516918591.158 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:31.159Z,1516918591.159 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:31.334Z,1516918591.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:31.731Z,1516918591.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:31.762Z,1516918591.762 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:31.763Z,1516918591.763 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:32.131Z,1516918592.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:32.519Z,1516918592.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:32.962Z,1516918592.962 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:32.963Z,1516918592.963 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:34.162Z,1516918594.162 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:34.163Z,1516918594.163 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:34.794Z,1516918594.794 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:16:34.795Z,1516918594.795 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:35.775Z,1516918595.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:35.894Z,1516918595.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:35.994Z,1516918595.994 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:16:35.995Z,1516918595.995 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:36.270Z,1516918596.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:36.650Z,1516918596.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:36.769Z,1516918596.769 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:36.770Z,1516918596.770 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:37.046Z,1516918597.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:37.436Z,1516918597.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:37.842Z,1516918597.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:37.970Z,1516918597.970 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:16:37.971Z,1516918597.971 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:38.240Z,1516918598.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:38.639Z,1516918598.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:39.047Z,1516918599.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:39.171Z,1516918599.171 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:39.173Z,1516918599.173 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:39.447Z,1516918599.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:39.774Z,1516918599.774 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:39.775Z,1516918599.775 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:39.870Z,1516918599.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:40.254Z,1516918600.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:40.637Z,1516918600.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:40.974Z,1516918600.974 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:40.975Z,1516918600.975 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:41.042Z,1516918601.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:41.444Z,1516918601.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:41.839Z,1516918601.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:42.174Z,1516918602.174 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:42.175Z,1516918602.175 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:42.247Z,1516918602.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:42.654Z,1516918602.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:42.780Z,1516918602.780 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:42.782Z,1516918602.782 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:43.053Z,1516918603.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:43.447Z,1516918603.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:43.849Z,1516918603.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:43.982Z,1516918603.982 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:43.984Z,1516918603.984 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:44.247Z,1516918604.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:44.645Z,1516918604.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:45.049Z,1516918605.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:45.182Z,1516918605.182 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:16:45.184Z,1516918605.184 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:45.447Z,1516918605.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:45.783Z,1516918605.783 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:16:45.784Z,1516918605.784 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:45.893Z,1516918605.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:46.256Z,1516918606.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:46.646Z,1516918606.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:46.986Z,1516918606.986 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:46.987Z,1516918606.987 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:47.062Z,1516918607.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:47.456Z,1516918607.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:47.851Z,1516918607.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:48.189Z,1516918608.189 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:48.190Z,1516918608.190 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:48.262Z,1516918608.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:48.659Z,1516918608.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:48.788Z,1516918608.788 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:48.789Z,1516918608.789 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:49.052Z,1516918609.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:49.434Z,1516918609.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:49.834Z,1516918609.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:49.990Z,1516918609.990 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:49.991Z,1516918609.991 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:50.281Z,1516918610.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:50.633Z,1516918610.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:51.040Z,1516918611.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:51.190Z,1516918611.190 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:51.191Z,1516918611.191 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:51.459Z,1516918611.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:51.809Z,1516918611.809 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:16:51.810Z,1516918611.810 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:51.879Z,1516918611.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:52.240Z,1516918612.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:52.642Z,1516918612.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:53.011Z,1516918613.011 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:53.013Z,1516918613.013 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:53.050Z,1516918613.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:53.453Z,1516918613.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:53.796Z,1516918613.796 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:53.797Z,1516918613.797 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:53.850Z,1516918613.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:54.259Z,1516918614.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:54.658Z,1516918614.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:54.998Z,1516918614.998 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:54.999Z,1516918614.999 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:55.082Z,1516918615.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:55.445Z,1516918615.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:55.894Z,1516918615.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:56.198Z,1516918616.198 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:16:56.199Z,1516918616.199 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:56.249Z,1516918616.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:56.638Z,1516918616.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:56.800Z,1516918616.800 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:56.801Z,1516918616.801 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:57.055Z,1516918617.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:57.455Z,1516918617.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:57.857Z,1516918617.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:58.002Z,1516918618.002 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:58.003Z,1516918618.003 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:58.268Z,1516918618.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:58.634Z,1516918618.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:59.038Z,1516918619.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:59.202Z,1516918619.202 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:59.203Z,1516918619.203 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:59.471Z,1516918619.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:16:59.808Z,1516918619.808 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:16:59.822Z,1516918619.822 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:16:59.870Z,1516918619.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:00.249Z,1516918620.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:00.658Z,1516918620.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:01.022Z,1516918621.022 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:17:01.023Z,1516918621.023 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:01.063Z,1516918621.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:01.447Z,1516918621.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:01.808Z,1516918621.808 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:17:01.809Z,1516918621.809 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:01.889Z,1516918621.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:02.257Z,1516918622.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:02.657Z,1516918622.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:03.010Z,1516918623.010 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:17:03.011Z,1516918623.011 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:03.075Z,1516918623.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:03.439Z,1516918623.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:03.863Z,1516918623.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:04.210Z,1516918624.210 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:17:04.211Z,1516918624.211 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:04.289Z,1516918624.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:04.666Z,1516918624.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:04.812Z,1516918624.812 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:17:04.814Z,1516918624.814 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:04.870Z,1516918624.870 [CommandLine](IMPORTANT): got command show best depth
2018-01-25T22:17:04.870Z,1516918624.870 [CommandLine](IMPORTANT): depth best is CTD_Seabird.depth
2018-01-25T22:17:05.047Z,1516918625.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:05.442Z,1516918625.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:05.849Z,1516918625.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:06.016Z,1516918626.016 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:17:06.017Z,1516918626.017 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:06.254Z,1516918626.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:06.656Z,1516918626.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:07.046Z,1516918627.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:07.218Z,1516918627.218 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:17:07.219Z,1516918627.219 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:07.441Z,1516918627.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:07.843Z,1516918627.843 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:17:07.844Z,1516918627.844 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:07.882Z,1516918627.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:08.258Z,1516918628.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:08.662Z,1516918628.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:08.906Z,1516918628.906 [CommandLine](IMPORTANT): got command get depth
2018-01-25T22:17:08.907Z,1516918628.907 [CommandLine](IMPORTANT): depth 0.000000 m
2018-01-25T22:17:09.050Z,1516918629.050 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:17:09.051Z,1516918629.051 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:09.059Z,1516918629.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:09.438Z,1516918629.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:09.821Z,1516918629.821 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:17:09.823Z,1516918629.823 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:09.854Z,1516918629.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:10.254Z,1516918630.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:10.651Z,1516918630.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:11.022Z,1516918631.022 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:17:11.023Z,1516918631.023 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:11.050Z,1516918631.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:11.447Z,1516918631.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:11.853Z,1516918631.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:12.223Z,1516918632.223 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:17:12.224Z,1516918632.224 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:12.266Z,1516918632.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:12.656Z,1516918632.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:12.825Z,1516918632.825 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:17:12.826Z,1516918632.826 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:13.043Z,1516918633.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:13.438Z,1516918633.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:13.866Z,1516918633.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:14.027Z,1516918634.027 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:17:14.028Z,1516918634.028 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:14.243Z,1516918634.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:14.643Z,1516918634.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:15.051Z,1516918635.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:15.226Z,1516918635.226 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:17:15.227Z,1516918635.227 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:15.444Z,1516918635.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:15.836Z,1516918635.836 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:17:15.837Z,1516918635.837 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:15.873Z,1516918635.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:16.252Z,1516918636.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:16.658Z,1516918636.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:17.038Z,1516918637.038 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:17:17.039Z,1516918637.039 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:17.049Z,1516918637.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:17.446Z,1516918637.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:17.850Z,1516918637.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:18.238Z,1516918638.238 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:17:18.239Z,1516918638.239 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:18.270Z,1516918638.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:18.666Z,1516918638.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:18.834Z,1516918638.834 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:17:18.835Z,1516918638.835 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:19.051Z,1516918639.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:19.434Z,1516918639.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:19.863Z,1516918639.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:20.034Z,1516918640.034 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:17:20.035Z,1516918640.035 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:20.240Z,1516918640.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:20.643Z,1516918640.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:21.046Z,1516918641.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:21.234Z,1516918641.234 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:17:21.235Z,1516918641.235 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:21.444Z,1516918641.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:21.839Z,1516918641.839 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:17:21.840Z,1516918641.840 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:21.876Z,1516918641.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:22.262Z,1516918642.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:22.648Z,1516918642.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:23.038Z,1516918643.038 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:17:23.039Z,1516918643.039 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:23.049Z,1516918643.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:23.454Z,1516918643.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:23.853Z,1516918643.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:24.238Z,1516918644.238 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:17:24.240Z,1516918644.240 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:24.254Z,1516918644.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:24.658Z,1516918644.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:24.843Z,1516918644.843 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:17:24.845Z,1516918644.845 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:25.050Z,1516918645.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:25.443Z,1516918645.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:25.852Z,1516918645.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:26.046Z,1516918646.046 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:17:26.047Z,1516918646.047 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:26.250Z,1516918646.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:26.653Z,1516918646.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:27.050Z,1516918647.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:27.246Z,1516918647.246 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:17:27.247Z,1516918647.247 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:27.447Z,1516918647.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:27.848Z,1516918647.848 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:17:27.849Z,1516918647.849 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:27.864Z,1516918647.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:28.251Z,1516918648.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:28.651Z,1516918648.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:29.050Z,1516918649.050 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:17:29.051Z,1516918649.051 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:29.052Z,1516918649.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:29.434Z,1516918649.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:29.859Z,1516918649.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:30.243Z,1516918650.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:30.250Z,1516918650.250 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:17:30.252Z,1516918650.252 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:30.663Z,1516918650.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:30.852Z,1516918650.852 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:17:30.854Z,1516918650.854 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:31.040Z,1516918651.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:31.440Z,1516918651.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:31.873Z,1516918651.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:32.054Z,1516918652.054 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:17:32.055Z,1516918652.055 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:32.250Z,1516918652.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:32.645Z,1516918652.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:33.254Z,1516918653.254 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:17:33.255Z,1516918653.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:33.857Z,1516918653.857 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:17:33.859Z,1516918653.859 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:35.060Z,1516918655.060 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:17:35.061Z,1516918655.061 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:35.923Z,1516918655.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:36.046Z,1516918656.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:36.263Z,1516918656.263 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:17:36.264Z,1516918656.264 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:36.400Z,1516918656.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:36.798Z,1516918656.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:36.862Z,1516918656.862 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:17:36.863Z,1516918656.863 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:37.191Z,1516918657.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:37.606Z,1516918657.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:38.008Z,1516918658.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:38.062Z,1516918658.062 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:17:38.063Z,1516918658.063 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:38.406Z,1516918658.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:38.806Z,1516918658.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:39.210Z,1516918659.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:39.262Z,1516918659.262 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:17:39.263Z,1516918659.263 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:39.609Z,1516918659.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:39.866Z,1516918659.866 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:17:39.868Z,1516918659.868 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:39.985Z,1516918659.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:40.418Z,1516918660.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:40.823Z,1516918660.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:41.066Z,1516918661.066 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:17:41.067Z,1516918661.067 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:41.207Z,1516918661.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:41.606Z,1516918661.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:41.993Z,1516918661.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:42.266Z,1516918662.266 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:17:42.267Z,1516918662.267 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:42.405Z,1516918662.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:42.802Z,1516918662.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:42.871Z,1516918662.871 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:17:42.873Z,1516918662.873 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:43.205Z,1516918663.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:43.614Z,1516918663.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:44.010Z,1516918664.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:44.074Z,1516918664.074 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:17:44.075Z,1516918664.075 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:44.402Z,1516918664.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:44.806Z,1516918664.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:45.217Z,1516918665.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:45.274Z,1516918665.274 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:17:45.275Z,1516918665.275 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:45.608Z,1516918665.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:45.875Z,1516918665.875 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:17:45.877Z,1516918665.877 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:46.006Z,1516918666.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:46.417Z,1516918666.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:46.814Z,1516918666.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:47.078Z,1516918667.078 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:17:47.079Z,1516918667.079 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:47.219Z,1516918667.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:47.591Z,1516918667.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:47.995Z,1516918667.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:48.278Z,1516918668.278 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:17:48.279Z,1516918668.279 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:48.399Z,1516918668.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:48.791Z,1516918668.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:48.880Z,1516918668.880 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:17:48.882Z,1516918668.882 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:49.186Z,1516918669.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:49.615Z,1516918669.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:50.010Z,1516918670.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:50.082Z,1516918670.082 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:17:50.083Z,1516918670.083 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:50.425Z,1516918670.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:50.785Z,1516918670.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:51.188Z,1516918671.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:51.282Z,1516918671.282 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:17:51.283Z,1516918671.283 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:51.603Z,1516918671.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:51.885Z,1516918671.885 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:17:51.886Z,1516918671.886 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:51.989Z,1516918671.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:52.405Z,1516918672.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:52.806Z,1516918672.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:53.086Z,1516918673.086 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:17:53.087Z,1516918673.087 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:53.206Z,1516918673.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:53.602Z,1516918673.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:53.985Z,1516918673.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:54.286Z,1516918674.286 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:17:54.287Z,1516918674.287 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:54.389Z,1516918674.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:54.805Z,1516918674.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:54.889Z,1516918674.889 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:17:54.891Z,1516918674.891 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:55.192Z,1516918675.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:55.602Z,1516918675.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:56.010Z,1516918676.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:56.090Z,1516918676.090 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:17:56.091Z,1516918676.091 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:56.406Z,1516918676.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:56.783Z,1516918676.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:57.182Z,1516918677.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:57.290Z,1516918677.290 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:17:57.291Z,1516918677.291 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:57.587Z,1516918677.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:57.894Z,1516918677.894 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:17:57.895Z,1516918677.895 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:57.988Z,1516918677.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:58.388Z,1516918678.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:58.798Z,1516918678.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:59.094Z,1516918679.094 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:17:59.095Z,1516918679.095 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:17:59.189Z,1516918679.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:59.607Z,1516918679.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:17:59.987Z,1516918679.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:00.294Z,1516918680.294 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:18:00.295Z,1516918680.295 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:00.394Z,1516918680.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:00.792Z,1516918680.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:00.899Z,1516918680.899 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:18:00.900Z,1516918680.900 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:01.185Z,1516918681.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:01.602Z,1516918681.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:02.006Z,1516918682.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:02.098Z,1516918682.098 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:18:02.099Z,1516918682.099 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:02.410Z,1516918682.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:02.785Z,1516918682.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:03.197Z,1516918683.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:03.298Z,1516918683.298 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:18:03.299Z,1516918683.299 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:03.585Z,1516918683.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:03.903Z,1516918683.903 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:18:03.905Z,1516918683.905 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:03.989Z,1516918683.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:04.418Z,1516918684.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:04.800Z,1516918684.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:05.106Z,1516918685.106 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:18:05.107Z,1516918685.107 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:05.199Z,1516918685.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:05.598Z,1516918685.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:05.996Z,1516918685.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:06.306Z,1516918686.306 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:18:06.307Z,1516918686.307 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:06.391Z,1516918686.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:06.786Z,1516918686.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:06.908Z,1516918686.908 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:18:06.909Z,1516918686.909 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:07.187Z,1516918687.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:07.590Z,1516918687.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:07.996Z,1516918687.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:08.110Z,1516918688.110 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:18:08.111Z,1516918688.111 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:08.399Z,1516918688.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:08.786Z,1516918688.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:09.199Z,1516918689.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:09.310Z,1516918689.310 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:18:09.311Z,1516918689.311 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:09.595Z,1516918689.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:09.913Z,1516918689.913 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:18:09.914Z,1516918689.914 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:09.987Z,1516918689.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:10.396Z,1516918690.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:10.796Z,1516918690.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:11.115Z,1516918691.115 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:18:11.117Z,1516918691.117 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:11.203Z,1516918691.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:11.598Z,1516918691.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:11.994Z,1516918691.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:12.318Z,1516918692.318 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:18:12.319Z,1516918692.319 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:12.393Z,1516918692.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:12.783Z,1516918692.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:12.816Z,1516918692.816 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-25T22:18:12.917Z,1516918692.917 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:18:12.919Z,1516918692.919 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:13.183Z,1516918693.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:13.611Z,1516918693.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:14.021Z,1516918694.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:14.118Z,1516918694.118 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:18:14.119Z,1516918694.119 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:14.396Z,1516918694.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:14.787Z,1516918694.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:15.196Z,1516918695.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:15.319Z,1516918695.319 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:18:15.321Z,1516918695.321 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:15.586Z,1516918695.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:15.923Z,1516918695.923 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:18:15.924Z,1516918695.924 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:16.002Z,1516918696.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:16.413Z,1516918696.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:16.800Z,1516918696.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:17.122Z,1516918697.122 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:18:17.123Z,1516918697.123 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:17.235Z,1516918697.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:17.602Z,1516918697.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:17.977Z,1516918697.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:18.322Z,1516918698.322 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:18:18.323Z,1516918698.323 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:18.406Z,1516918698.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:18.786Z,1516918698.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:18.927Z,1516918698.927 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:18:18.928Z,1516918698.928 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:19.186Z,1516918699.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:19.614Z,1516918699.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:19.996Z,1516918699.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:20.126Z,1516918700.126 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:18:20.127Z,1516918700.127 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:20.388Z,1516918700.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:20.784Z,1516918700.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:21.197Z,1516918701.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:21.326Z,1516918701.326 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:18:21.327Z,1516918701.327 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:21.594Z,1516918701.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:21.931Z,1516918701.931 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:18:21.933Z,1516918701.933 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:22.010Z,1516918702.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:22.399Z,1516918702.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:22.799Z,1516918702.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:23.134Z,1516918703.134 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:18:23.135Z,1516918703.135 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:23.206Z,1516918703.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:23.599Z,1516918703.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:23.991Z,1516918703.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:24.334Z,1516918704.334 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:18:24.335Z,1516918704.335 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:24.414Z,1516918704.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:24.804Z,1516918704.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:24.936Z,1516918704.936 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:18:24.937Z,1516918704.937 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:25.199Z,1516918705.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:25.602Z,1516918705.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:26.013Z,1516918706.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:26.138Z,1516918706.138 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:18:26.139Z,1516918706.139 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:26.406Z,1516918706.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:26.793Z,1516918706.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:27.202Z,1516918707.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:27.338Z,1516918707.338 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:18:27.339Z,1516918707.339 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:27.591Z,1516918707.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:27.949Z,1516918707.949 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:18:27.951Z,1516918707.951 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:28.002Z,1516918708.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:28.410Z,1516918708.410 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:28.410Z,1516918708.410 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 20
2018-01-25T22:18:28.410Z,1516918708.410 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-25T22:18:28.412Z,1516918708.412 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:28.412Z,1516918708.412 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20
2018-01-25T22:18:28.412Z,1516918708.412 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-25T22:18:28.418Z,1516918708.418 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:28.418Z,1516918708.418 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2018-01-25T22:18:28.418Z,1516918708.418 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-25T22:18:28.453Z,1516918708.453 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-25T22:18:28.453Z,1516918708.453 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-25T22:18:28.454Z,1516918708.454 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-25T22:18:28.817Z,1516918708.817 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-25T22:18:28.817Z,1516918708.817 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 20
2018-01-25T22:18:28.817Z,1516918708.817 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-25T22:18:28.817Z,1516918708.817 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20
2018-01-25T22:18:28.818Z,1516918708.818 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-25T22:18:28.818Z,1516918708.818 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2018-01-25T22:18:29.150Z,1516918709.150 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:18:29.151Z,1516918709.151 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:29.206Z,1516918709.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-25T22:18:29.207Z,1516918709.207 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T22:18:29.207Z,1516918709.207 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T22:18:29.207Z,1516918709.207 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-25T22:18:29.208Z,1516918709.208 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T22:18:29.208Z,1516918709.208 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T22:18:29.217Z,1516918709.217 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-25T22:18:29.217Z,1516918709.217 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T22:18:29.217Z,1516918709.217 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T22:18:29.585Z,1516918709.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-25T22:18:29.586Z,1516918709.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:29.944Z,1516918709.944 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:18:29.945Z,1516918709.945 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:29.999Z,1516918709.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-25T22:18:30.000Z,1516918710.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:30.395Z,1516918710.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-25T22:18:30.396Z,1516918710.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:30.788Z,1516918710.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-25T22:18:30.789Z,1516918710.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:31.154Z,1516918711.154 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:18:31.155Z,1516918711.155 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:31.211Z,1516918711.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-25T22:18:31.211Z,1516918711.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:31.606Z,1516918711.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-25T22:18:31.607Z,1516918711.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:31.948Z,1516918711.948 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:18:31.950Z,1516918711.950 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:32.022Z,1516918712.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-25T22:18:32.023Z,1516918712.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:32.410Z,1516918712.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-25T22:18:32.411Z,1516918712.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:32.784Z,1516918712.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-25T22:18:32.785Z,1516918712.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:33.150Z,1516918713.150 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:18:33.151Z,1516918713.151 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:34.350Z,1516918714.350 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:18:34.351Z,1516918714.351 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:34.951Z,1516918714.951 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:18:34.953Z,1516918714.953 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:36.070Z,1516918716.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-01-25T22:18:36.071Z,1516918716.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:36.155Z,1516918716.155 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:18:36.156Z,1516918716.156 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:36.172Z,1516918716.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.8 s old, using for 20.0 s.
2018-01-25T22:18:36.173Z,1516918716.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:36.562Z,1516918716.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.2 s old, using for 20.0 s.
2018-01-25T22:18:36.563Z,1516918716.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:36.965Z,1516918716.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.6 s old, using for 20.0 s.
2018-01-25T22:18:36.966Z,1516918716.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:37.342Z,1516918717.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-01-25T22:18:37.343Z,1516918717.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:37.362Z,1516918717.362 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:18:37.364Z,1516918717.364 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:37.742Z,1516918717.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-01-25T22:18:37.743Z,1516918717.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:37.956Z,1516918717.956 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:18:37.957Z,1516918717.957 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:38.142Z,1516918718.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-01-25T22:18:38.143Z,1516918718.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:38.544Z,1516918718.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-01-25T22:18:38.545Z,1516918718.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:38.970Z,1516918718.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.6 s old, using for 20.0 s.
2018-01-25T22:18:38.971Z,1516918718.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:39.158Z,1516918719.158 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:18:39.159Z,1516918719.159 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:39.355Z,1516918719.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-01-25T22:18:39.357Z,1516918719.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:39.750Z,1516918719.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-01-25T22:18:39.751Z,1516918719.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:40.154Z,1516918720.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-01-25T22:18:40.155Z,1516918720.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:40.358Z,1516918720.358 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:18:40.359Z,1516918720.359 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:40.550Z,1516918720.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-01-25T22:18:40.551Z,1516918720.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:40.961Z,1516918720.961 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:18:40.962Z,1516918720.962 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:40.964Z,1516918720.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.6 s old, using for 20.0 s.
2018-01-25T22:18:40.969Z,1516918720.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:41.350Z,1516918721.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-01-25T22:18:41.351Z,1516918721.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:41.764Z,1516918721.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.4 s old, using for 20.0 s.
2018-01-25T22:18:41.765Z,1516918721.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:42.151Z,1516918722.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-01-25T22:18:42.157Z,1516918722.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:42.162Z,1516918722.162 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:18:42.164Z,1516918722.164 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:42.530Z,1516918722.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-01-25T22:18:42.531Z,1516918722.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:42.934Z,1516918722.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-01-25T22:18:42.935Z,1516918722.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:43.338Z,1516918723.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-01-25T22:18:43.339Z,1516918723.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:43.362Z,1516918723.362 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:18:43.363Z,1516918723.363 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:43.750Z,1516918723.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-01-25T22:18:43.751Z,1516918723.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:43.965Z,1516918723.965 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:18:43.967Z,1516918723.967 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:44.147Z,1516918724.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-01-25T22:18:44.148Z,1516918724.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:44.543Z,1516918724.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-01-25T22:18:44.549Z,1516918724.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:44.981Z,1516918724.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2018-01-25T22:18:44.982Z,1516918724.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:45.166Z,1516918725.166 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:18:45.167Z,1516918725.167 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:45.346Z,1516918725.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-01-25T22:18:45.347Z,1516918725.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:45.742Z,1516918725.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-01-25T22:18:45.743Z,1516918725.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:46.143Z,1516918726.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-01-25T22:18:46.144Z,1516918726.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:46.366Z,1516918726.366 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:18:46.367Z,1516918726.367 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:46.549Z,1516918726.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-01-25T22:18:46.550Z,1516918726.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:46.971Z,1516918726.971 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:18:46.973Z,1516918726.973 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:46.976Z,1516918726.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2018-01-25T22:18:46.993Z,1516918726.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:47.350Z,1516918727.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-01-25T22:18:47.351Z,1516918727.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:47.752Z,1516918727.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-01-25T22:18:47.753Z,1516918727.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:48.128Z,1516918728.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-01-25T22:18:48.145Z,1516918728.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:48.174Z,1516918728.174 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:18:48.175Z,1516918728.175 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:48.549Z,1516918728.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:48.930Z,1516918728.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:49.332Z,1516918729.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:49.374Z,1516918729.374 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:18:49.375Z,1516918729.375 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:49.746Z,1516918729.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:49.974Z,1516918729.974 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:18:49.976Z,1516918729.976 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:50.158Z,1516918730.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:50.542Z,1516918730.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:50.932Z,1516918730.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:51.174Z,1516918731.174 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:18:51.175Z,1516918731.175 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:51.355Z,1516918731.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:51.746Z,1516918731.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:52.139Z,1516918732.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:52.374Z,1516918732.374 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:18:52.375Z,1516918732.375 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:52.542Z,1516918732.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:52.948Z,1516918732.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:52.980Z,1516918732.980 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:18:52.981Z,1516918732.981 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:53.353Z,1516918733.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:53.748Z,1516918733.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:54.138Z,1516918734.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:54.182Z,1516918734.182 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:18:54.183Z,1516918734.183 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:54.538Z,1516918734.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:54.950Z,1516918734.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:55.345Z,1516918735.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:55.382Z,1516918735.382 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:18:55.383Z,1516918735.383 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:55.755Z,1516918735.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:55.984Z,1516918735.984 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:18:55.985Z,1516918735.985 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:56.154Z,1516918736.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:56.545Z,1516918736.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:56.947Z,1516918736.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:57.186Z,1516918737.186 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:18:57.187Z,1516918737.187 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:57.354Z,1516918737.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:57.744Z,1516918737.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:58.150Z,1516918738.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:58.388Z,1516918738.388 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:18:58.389Z,1516918738.389 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:58.562Z,1516918738.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:58.952Z,1516918738.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:58.995Z,1516918738.995 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:18:58.997Z,1516918738.997 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:18:59.354Z,1516918739.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:18:59.737Z,1516918739.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:00.162Z,1516918740.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:00.198Z,1516918740.198 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:19:00.199Z,1516918740.199 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:00.536Z,1516918740.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:00.937Z,1516918740.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:00.992Z,1516918740.992 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:19:00.993Z,1516918740.993 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:01.344Z,1516918741.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:01.740Z,1516918741.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:02.147Z,1516918742.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:02.194Z,1516918742.194 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:19:02.195Z,1516918742.195 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:02.543Z,1516918742.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:02.937Z,1516918742.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:03.346Z,1516918743.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:03.394Z,1516918743.394 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:19:03.395Z,1516918743.395 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:03.740Z,1516918743.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:04.024Z,1516918744.024 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:19:04.025Z,1516918744.025 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:04.143Z,1516918744.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:04.546Z,1516918744.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:04.947Z,1516918744.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:05.226Z,1516918745.226 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:19:05.227Z,1516918745.227 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:05.347Z,1516918745.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:05.751Z,1516918745.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:05.000Z,1516918746.000 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:19:06.001Z,1516918746.001 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:06.140Z,1516918746.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:06.547Z,1516918746.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:06.946Z,1516918746.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:07.202Z,1516918747.202 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:19:07.203Z,1516918747.203 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:07.346Z,1516918747.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:07.735Z,1516918747.735 [PNI_TCM](ERROR): CRC does not match. Expected:0x33621 got:0x49816
2018-01-25T22:19:07.754Z,1516918747.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:08.160Z,1516918748.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:08.402Z,1516918748.402 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:19:08.403Z,1516918748.403 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:08.546Z,1516918748.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:08.950Z,1516918748.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:09.004Z,1516918749.004 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:19:09.005Z,1516918749.005 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:09.341Z,1516918749.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:09.739Z,1516918749.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:10.137Z,1516918750.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:10.206Z,1516918750.206 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:19:10.207Z,1516918750.207 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:10.558Z,1516918750.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:10.952Z,1516918750.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:11.358Z,1516918751.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:11.406Z,1516918751.406 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:19:11.407Z,1516918751.407 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:11.764Z,1516918751.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:12.008Z,1516918752.008 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:19:12.010Z,1516918752.010 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:12.155Z,1516918752.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:12.557Z,1516918752.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:12.938Z,1516918752.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:13.210Z,1516918753.210 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:19:13.211Z,1516918753.211 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:13.348Z,1516918753.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:13.766Z,1516918753.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:14.148Z,1516918754.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:14.410Z,1516918754.410 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:19:14.411Z,1516918754.411 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:14.566Z,1516918754.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:14.949Z,1516918754.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:15.013Z,1516918755.013 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:19:15.015Z,1516918755.015 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:15.350Z,1516918755.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:15.742Z,1516918755.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:16.141Z,1516918756.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:16.214Z,1516918756.214 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:19:16.215Z,1516918756.215 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:16.566Z,1516918756.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:16.958Z,1516918756.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:17.353Z,1516918757.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:17.414Z,1516918757.414 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:19:17.415Z,1516918757.415 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:17.750Z,1516918757.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:18.018Z,1516918758.018 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:19:18.019Z,1516918758.019 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:18.141Z,1516918758.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:18.554Z,1516918758.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:18.954Z,1516918758.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:19.218Z,1516918759.218 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:19:19.219Z,1516918759.219 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:19.362Z,1516918759.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:19.755Z,1516918759.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:20.163Z,1516918760.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:20.418Z,1516918760.418 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:19:20.419Z,1516918760.419 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:20.548Z,1516918760.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:20.933Z,1516918760.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:21.022Z,1516918761.022 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:19:21.024Z,1516918761.024 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:21.338Z,1516918761.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:21.765Z,1516918761.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:22.132Z,1516918762.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:22.222Z,1516918762.222 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:19:22.224Z,1516918762.224 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:22.568Z,1516918762.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:22.943Z,1516918762.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:23.362Z,1516918763.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:23.422Z,1516918763.422 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:19:23.423Z,1516918763.423 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:23.734Z,1516918763.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:24.027Z,1516918764.027 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:19:24.028Z,1516918764.028 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:24.141Z,1516918764.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:24.539Z,1516918764.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:24.934Z,1516918764.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:25.230Z,1516918765.230 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:19:25.231Z,1516918765.231 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:25.336Z,1516918765.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:25.749Z,1516918765.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:26.150Z,1516918766.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:26.430Z,1516918766.430 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:19:26.431Z,1516918766.431 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:26.576Z,1516918766.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:26.932Z,1516918766.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:27.032Z,1516918767.032 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:19:27.034Z,1516918767.034 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:27.347Z,1516918767.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:27.741Z,1516918767.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:28.132Z,1516918768.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:28.234Z,1516918768.234 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:19:28.235Z,1516918768.235 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:28.548Z,1516918768.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:28.954Z,1516918768.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:29.350Z,1516918769.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:29.434Z,1516918769.434 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:19:29.435Z,1516918769.435 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:29.742Z,1516918769.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:30.036Z,1516918770.036 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:19:30.038Z,1516918770.038 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:30.133Z,1516918770.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:30.532Z,1516918770.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:30.949Z,1516918770.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:31.238Z,1516918771.238 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:19:31.239Z,1516918771.239 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:31.342Z,1516918771.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:31.743Z,1516918771.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:32.158Z,1516918772.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:32.438Z,1516918772.438 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:19:32.439Z,1516918772.439 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:32.555Z,1516918772.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:32.558Z,1516918772.558 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-25T22:14:32.3Z
2018-01-25T22:19:32.558Z,1516918772.558 [Default:CheckIn:Read_GPS] Stopped
2018-01-25T22:19:32.558Z,1516918772.558 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-25T22:19:32.954Z,1516918772.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:33.041Z,1516918773.041 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:19:33.043Z,1516918773.043 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:34.242Z,1516918774.242 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:19:34.243Z,1516918774.243 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:35.442Z,1516918775.442 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:19:35.443Z,1516918775.443 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:36.046Z,1516918776.046 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:19:36.047Z,1516918776.047 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:36.359Z,1516918776.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:36.445Z,1516918776.445 [DataOverHttps](INFO): Sending 93 bytes from file Logs/20180125T211802/Courier0024.lzma
2018-01-25T22:19:36.499Z,1516918776.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:36.854Z,1516918776.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:37.207Z,1516918777.207 [DataOverHttps](INFO): Moved sent file to Logs/20180125T211802/Courier0024.lzma.bak
2018-01-25T22:19:37.207Z,1516918777.207 [DataOverHttps](INFO): SBD MOMSN=7761311
2018-01-25T22:19:37.249Z,1516918777.249 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:19:37.251Z,1516918777.251 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:37.306Z,1516918777.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:37.952Z,1516918777.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:38.110Z,1516918778.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:38.450Z,1516918778.450 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:19:38.452Z,1516918778.452 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:39.051Z,1516918779.051 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:19:39.052Z,1516918779.052 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:40.250Z,1516918780.250 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:19:40.251Z,1516918780.251 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:41.326Z,1516918781.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:41.436Z,1516918781.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:41.450Z,1516918781.450 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:19:41.451Z,1516918781.451 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:41.831Z,1516918781.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:42.055Z,1516918782.055 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:19:42.056Z,1516918782.056 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:42.238Z,1516918782.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:42.639Z,1516918782.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:43.057Z,1516918783.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:43.254Z,1516918783.254 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:19:43.255Z,1516918783.255 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:44.454Z,1516918784.454 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:19:44.456Z,1516918784.456 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:45.060Z,1516918785.060 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:19:45.061Z,1516918785.061 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:46.262Z,1516918786.262 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:19:46.263Z,1516918786.263 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:46.272Z,1516918786.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:46.364Z,1516918786.364 [DataOverHttps](INFO): Sending 460 bytes from file Logs/20180125T211802/Express0025.lzma
2018-01-25T22:19:46.426Z,1516918786.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:46.746Z,1516918786.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:47.099Z,1516918787.099 [DataOverHttps](INFO): Moved sent file to Logs/20180125T211802/Express0025.lzma.bak
2018-01-25T22:19:47.099Z,1516918787.099 [DataOverHttps](INFO): SBD MOMSN=7761314
2018-01-25T22:19:47.186Z,1516918787.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:47.462Z,1516918787.462 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:19:47.464Z,1516918787.464 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:48.014Z,1516918788.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:48.064Z,1516918788.064 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:19:48.074Z,1516918788.074 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:48.086Z,1516918788.086 [Default:CheckIn:Read_Iridium] Stopped
2018-01-25T22:19:48.086Z,1516918788.086 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-25T22:19:48.086Z,1516918788.086 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-25T22:19:48.221Z,1516918788.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:49.274Z,1516918789.274 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:19:49.275Z,1516918789.275 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:50.067Z,1516918790.067 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:19:50.070Z,1516918790.070 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:51.270Z,1516918791.270 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:19:51.271Z,1516918791.271 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:52.470Z,1516918792.470 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:19:52.471Z,1516918792.471 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:53.072Z,1516918793.072 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:19:53.074Z,1516918793.074 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:53.824Z,1516918793.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:53.945Z,1516918793.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:54.274Z,1516918794.274 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:19:54.275Z,1516918794.275 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:54.359Z,1516918794.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:54.734Z,1516918794.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:55.126Z,1516918795.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:55.474Z,1516918795.474 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:19:55.475Z,1516918795.475 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:55.552Z,1516918795.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:55.926Z,1516918795.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:56.077Z,1516918796.077 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:19:56.078Z,1516918796.078 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:56.329Z,1516918796.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:56.738Z,1516918796.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:57.130Z,1516918797.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:57.278Z,1516918797.278 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:19:57.279Z,1516918797.279 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:57.569Z,1516918797.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:57.899Z,1516918797.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:58.312Z,1516918798.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:58.478Z,1516918798.478 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:19:58.480Z,1516918798.480 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:58.714Z,1516918798.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:59.105Z,1516918799.105 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:19:59.106Z,1516918799.106 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:19:59.126Z,1516918799.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:59.534Z,1516918799.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:19:59.926Z,1516918799.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:00.306Z,1516918800.306 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:00.307Z,1516918800.307 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:00.319Z,1516918800.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:00.701Z,1516918800.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:01.084Z,1516918801.084 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:01.086Z,1516918801.086 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:01.122Z,1516918801.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:01.512Z,1516918801.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:01.911Z,1516918801.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:02.286Z,1516918802.286 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:02.287Z,1516918802.287 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:02.310Z,1516918802.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:02.704Z,1516918802.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:03.119Z,1516918803.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:03.486Z,1516918803.486 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:03.488Z,1516918803.488 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:03.524Z,1516918803.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:03.912Z,1516918803.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:04.089Z,1516918804.089 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:04.090Z,1516918804.090 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:04.323Z,1516918804.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:04.714Z,1516918804.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:05.108Z,1516918805.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:05.290Z,1516918805.290 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:05.291Z,1516918805.291 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:05.524Z,1516918805.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:05.914Z,1516918805.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:06.317Z,1516918806.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:06.490Z,1516918806.490 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:06.491Z,1516918806.491 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:06.714Z,1516918806.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:07.094Z,1516918807.094 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:07.095Z,1516918807.095 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:07.122Z,1516918807.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:07.515Z,1516918807.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:07.922Z,1516918807.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:08.294Z,1516918808.294 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:08.295Z,1516918808.295 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:08.335Z,1516918808.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:08.699Z,1516918808.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:09.129Z,1516918809.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:09.494Z,1516918809.494 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:09.495Z,1516918809.495 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:09.504Z,1516918809.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:09.907Z,1516918809.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:10.098Z,1516918810.098 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:10.099Z,1516918810.099 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:10.301Z,1516918810.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:10.701Z,1516918810.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:11.126Z,1516918811.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:11.298Z,1516918811.298 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:11.299Z,1516918811.299 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:11.519Z,1516918811.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:11.909Z,1516918811.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:12.311Z,1516918812.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:12.498Z,1516918812.498 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:12.499Z,1516918812.499 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:12.710Z,1516918812.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:13.104Z,1516918813.104 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:13.105Z,1516918813.105 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:13.119Z,1516918813.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:13.520Z,1516918813.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:13.916Z,1516918813.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:14.306Z,1516918814.306 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:14.307Z,1516918814.307 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:14.311Z,1516918814.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:14.714Z,1516918814.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:15.122Z,1516918815.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:15.506Z,1516918815.506 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:15.507Z,1516918815.507 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:15.511Z,1516918815.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:15.919Z,1516918815.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:16.109Z,1516918816.109 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:16.110Z,1516918816.110 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:16.325Z,1516918816.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:16.698Z,1516918816.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:17.122Z,1516918817.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:17.310Z,1516918817.310 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:17.311Z,1516918817.311 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:17.504Z,1516918817.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:17.907Z,1516918817.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:18.299Z,1516918818.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:18.510Z,1516918818.510 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:18.511Z,1516918818.511 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:18.696Z,1516918818.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:19.112Z,1516918819.112 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:19.114Z,1516918819.114 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:19.125Z,1516918819.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:19.511Z,1516918819.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:19.910Z,1516918819.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:20.314Z,1516918820.314 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:20.315Z,1516918820.315 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:20.321Z,1516918820.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:20.706Z,1516918820.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:21.118Z,1516918821.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:21.505Z,1516918821.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:21.514Z,1516918821.514 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:21.515Z,1516918821.515 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:21.909Z,1516918821.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:22.117Z,1516918822.117 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:22.118Z,1516918822.118 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:22.306Z,1516918822.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:22.701Z,1516918822.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:23.120Z,1516918823.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:23.318Z,1516918823.318 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:23.319Z,1516918823.319 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:23.511Z,1516918823.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:23.910Z,1516918823.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:24.311Z,1516918824.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:24.518Z,1516918824.518 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:24.519Z,1516918824.519 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:24.708Z,1516918824.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:25.114Z,1516918825.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:25.121Z,1516918825.121 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:25.123Z,1516918825.123 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:25.507Z,1516918825.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:25.914Z,1516918825.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:26.306Z,1516918826.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:26.323Z,1516918826.323 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:26.324Z,1516918826.324 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:26.703Z,1516918826.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:27.125Z,1516918827.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:27.514Z,1516918827.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:27.522Z,1516918827.522 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:27.524Z,1516918827.524 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:27.922Z,1516918827.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:28.126Z,1516918828.126 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:28.127Z,1516918828.127 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:28.318Z,1516918828.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:28.707Z,1516918828.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:29.105Z,1516918829.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:29.326Z,1516918829.326 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:29.327Z,1516918829.327 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:29.510Z,1516918829.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:29.907Z,1516918829.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:30.310Z,1516918830.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:30.526Z,1516918830.526 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:30.527Z,1516918830.527 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:30.713Z,1516918830.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:31.127Z,1516918831.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:31.131Z,1516918831.131 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:31.133Z,1516918831.133 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:31.514Z,1516918831.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:31.916Z,1516918831.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:32.310Z,1516918832.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:32.334Z,1516918832.334 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:32.335Z,1516918832.335 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:32.718Z,1516918832.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:33.136Z,1516918833.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:33.508Z,1516918833.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:33.534Z,1516918833.534 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:33.535Z,1516918833.535 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:33.914Z,1516918833.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:34.135Z,1516918834.135 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:34.136Z,1516918834.136 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:34.314Z,1516918834.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:34.694Z,1516918834.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:35.098Z,1516918835.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:35.338Z,1516918835.338 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:35.339Z,1516918835.339 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:35.502Z,1516918835.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:35.927Z,1516918835.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:36.307Z,1516918836.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:36.538Z,1516918836.538 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:36.539Z,1516918836.539 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:36.706Z,1516918836.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:37.106Z,1516918837.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:37.140Z,1516918837.140 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:37.141Z,1516918837.141 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:37.500Z,1516918837.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:37.906Z,1516918837.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:38.296Z,1516918838.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:38.342Z,1516918838.342 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:38.343Z,1516918838.343 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:38.718Z,1516918838.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:39.131Z,1516918839.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:39.521Z,1516918839.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:39.542Z,1516918839.542 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:39.543Z,1516918839.543 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:39.911Z,1516918839.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:40.144Z,1516918840.144 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:40.146Z,1516918840.146 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:40.313Z,1516918840.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:40.702Z,1516918840.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:41.115Z,1516918841.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:41.348Z,1516918841.348 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:41.349Z,1516918841.349 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:41.514Z,1516918841.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:41.918Z,1516918841.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:42.321Z,1516918842.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:42.550Z,1516918842.550 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:42.551Z,1516918842.551 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:42.718Z,1516918842.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:43.098Z,1516918843.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:43.149Z,1516918843.149 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:43.151Z,1516918843.151 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:43.502Z,1516918843.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:43.909Z,1516918843.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:44.306Z,1516918844.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:44.350Z,1516918844.350 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:44.351Z,1516918844.351 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:44.711Z,1516918844.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:45.114Z,1516918845.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:45.510Z,1516918845.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:45.550Z,1516918845.550 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:45.552Z,1516918845.552 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:45.903Z,1516918845.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:46.154Z,1516918846.154 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:46.155Z,1516918846.155 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:46.309Z,1516918846.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:46.706Z,1516918846.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:47.110Z,1516918847.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:47.354Z,1516918847.354 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:47.355Z,1516918847.355 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:47.519Z,1516918847.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:47.920Z,1516918847.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:48.319Z,1516918848.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:48.554Z,1516918848.554 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:48.555Z,1516918848.555 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:48.717Z,1516918848.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:49.158Z,1516918849.158 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:49.160Z,1516918849.160 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:50.358Z,1516918850.358 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:50.359Z,1516918850.359 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:51.558Z,1516918851.558 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:51.559Z,1516918851.559 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:51.973Z,1516918851.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:52.110Z,1516918852.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:52.163Z,1516918852.163 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:52.165Z,1516918852.165 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:52.462Z,1516918852.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:52.857Z,1516918852.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:53.236Z,1516918853.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:53.366Z,1516918853.366 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:53.367Z,1516918853.367 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:53.658Z,1516918853.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:54.030Z,1516918854.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:54.434Z,1516918854.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:54.566Z,1516918854.566 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:54.567Z,1516918854.567 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:54.863Z,1516918854.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:55.168Z,1516918855.168 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:55.169Z,1516918855.169 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:55.257Z,1516918855.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:55.646Z,1516918855.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:56.033Z,1516918856.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:56.370Z,1516918856.370 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:56.371Z,1516918856.371 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:56.446Z,1516918856.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:56.843Z,1516918856.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:57.242Z,1516918857.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:57.570Z,1516918857.570 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:57.571Z,1516918857.571 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:57.666Z,1516918857.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:58.046Z,1516918858.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:58.172Z,1516918858.172 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:58.174Z,1516918858.174 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:58.446Z,1516918858.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:58.842Z,1516918858.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:59.240Z,1516918859.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:20:59.375Z,1516918859.375 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:20:59.377Z,1516918859.377 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:20:59.641Z,1516918859.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:00.046Z,1516918860.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:00.445Z,1516918860.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:00.578Z,1516918860.578 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:00.579Z,1516918860.579 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:00.859Z,1516918860.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:01.177Z,1516918861.177 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:01.179Z,1516918861.179 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:01.264Z,1516918861.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:01.656Z,1516918861.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:02.051Z,1516918862.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:02.378Z,1516918862.378 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:02.379Z,1516918862.379 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:02.459Z,1516918862.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:02.834Z,1516918862.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:03.234Z,1516918863.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:03.578Z,1516918863.578 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:03.579Z,1516918863.579 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:03.663Z,1516918863.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:04.055Z,1516918864.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:04.181Z,1516918864.181 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:04.183Z,1516918864.183 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:04.440Z,1516918864.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:04.833Z,1516918864.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:05.232Z,1516918865.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:05.382Z,1516918865.382 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:05.383Z,1516918865.383 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:05.642Z,1516918865.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:06.032Z,1516918866.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:06.436Z,1516918866.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:06.582Z,1516918866.582 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:06.583Z,1516918866.583 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:06.854Z,1516918866.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:07.186Z,1516918867.186 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:07.187Z,1516918867.187 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:07.266Z,1516918867.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:07.654Z,1516918867.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:08.034Z,1516918868.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:08.402Z,1516918868.402 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:08.429Z,1516918868.429 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:08.439Z,1516918868.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:08.840Z,1516918868.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:09.197Z,1516918869.197 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:09.199Z,1516918869.199 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:09.254Z,1516918869.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:09.655Z,1516918869.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:10.050Z,1516918870.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:10.398Z,1516918870.398 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:10.399Z,1516918870.399 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:10.462Z,1516918870.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:10.830Z,1516918870.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:11.192Z,1516918871.192 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:11.194Z,1516918871.194 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:11.258Z,1516918871.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:11.654Z,1516918871.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:12.029Z,1516918872.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:12.394Z,1516918872.394 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:12.395Z,1516918872.395 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:12.450Z,1516918872.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:12.842Z,1516918872.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:13.250Z,1516918873.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:13.594Z,1516918873.594 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:13.595Z,1516918873.595 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:13.661Z,1516918873.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:14.040Z,1516918874.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:14.197Z,1516918874.197 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:14.198Z,1516918874.198 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:14.444Z,1516918874.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:14.834Z,1516918874.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:15.250Z,1516918875.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:15.398Z,1516918875.398 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:15.399Z,1516918875.399 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:15.643Z,1516918875.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:16.050Z,1516918876.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:16.446Z,1516918876.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:16.598Z,1516918876.598 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:16.599Z,1516918876.599 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:16.850Z,1516918876.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:17.202Z,1516918877.202 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:17.203Z,1516918877.203 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:17.261Z,1516918877.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:17.654Z,1516918877.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:18.054Z,1516918878.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:18.402Z,1516918878.402 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:18.403Z,1516918878.403 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:18.467Z,1516918878.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:18.846Z,1516918878.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:19.246Z,1516918879.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:19.602Z,1516918879.602 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:19.603Z,1516918879.603 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:19.662Z,1516918879.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:20.056Z,1516918880.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:20.206Z,1516918880.206 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:20.207Z,1516918880.207 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:20.453Z,1516918880.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:20.830Z,1516918880.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:21.255Z,1516918881.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:21.406Z,1516918881.406 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:21.407Z,1516918881.407 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:21.655Z,1516918881.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:22.043Z,1516918882.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:22.435Z,1516918882.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:22.606Z,1516918882.606 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:22.607Z,1516918882.607 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:22.842Z,1516918882.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:23.211Z,1516918883.211 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:23.217Z,1516918883.217 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:23.258Z,1516918883.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:23.638Z,1516918883.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:24.042Z,1516918884.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:24.418Z,1516918884.418 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:24.419Z,1516918884.419 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:24.447Z,1516918884.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:24.842Z,1516918884.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:25.248Z,1516918885.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:25.618Z,1516918885.618 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:25.619Z,1516918885.619 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:25.659Z,1516918885.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:26.048Z,1516918886.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:26.215Z,1516918886.215 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:26.217Z,1516918886.217 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:26.453Z,1516918886.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:26.834Z,1516918886.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:27.251Z,1516918887.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:27.419Z,1516918887.419 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:27.421Z,1516918887.421 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:27.650Z,1516918887.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:28.058Z,1516918888.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:28.446Z,1516918888.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:28.623Z,1516918888.623 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:28.625Z,1516918888.625 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:28.851Z,1516918888.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:29.237Z,1516918889.237 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:29.238Z,1516918889.238 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:29.254Z,1516918889.254 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:29.254Z,1516918889.254 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 21
2018-01-25T22:21:29.254Z,1516918889.254 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-25T22:21:29.256Z,1516918889.256 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:29.256Z,1516918889.256 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 21
2018-01-25T22:21:29.256Z,1516918889.256 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-25T22:21:29.258Z,1516918889.258 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:29.258Z,1516918889.258 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 21
2018-01-25T22:21:29.258Z,1516918889.258 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-25T22:21:29.270Z,1516918889.270 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-25T22:21:29.270Z,1516918889.270 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-25T22:21:29.270Z,1516918889.270 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-25T22:21:29.668Z,1516918889.668 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-25T22:21:29.669Z,1516918889.669 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 21
2018-01-25T22:21:29.669Z,1516918889.669 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-25T22:21:29.669Z,1516918889.669 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 21
2018-01-25T22:21:29.670Z,1516918889.670 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-25T22:21:29.670Z,1516918889.670 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 21
2018-01-25T22:21:30.057Z,1516918890.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-25T22:21:30.057Z,1516918890.057 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T22:21:30.057Z,1516918890.057 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T22:21:30.058Z,1516918890.058 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-25T22:21:30.058Z,1516918890.058 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T22:21:30.059Z,1516918890.059 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T22:21:30.059Z,1516918890.059 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-25T22:21:30.059Z,1516918890.059 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T22:21:30.060Z,1516918890.060 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T22:21:30.438Z,1516918890.438 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:30.439Z,1516918890.439 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:30.461Z,1516918890.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-25T22:21:30.462Z,1516918890.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:30.833Z,1516918890.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-25T22:21:30.834Z,1516918890.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:31.225Z,1516918891.225 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:31.226Z,1516918891.226 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:31.251Z,1516918891.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-25T22:21:31.252Z,1516918891.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:31.643Z,1516918891.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-25T22:21:31.644Z,1516918891.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:32.045Z,1516918892.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-25T22:21:32.046Z,1516918892.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:32.426Z,1516918892.426 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:32.428Z,1516918892.428 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:32.446Z,1516918892.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-25T22:21:32.447Z,1516918892.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:32.843Z,1516918892.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-25T22:21:32.844Z,1516918892.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:33.247Z,1516918893.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-25T22:21:33.250Z,1516918893.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:33.627Z,1516918893.627 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:33.628Z,1516918893.628 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:33.646Z,1516918893.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-25T22:21:33.647Z,1516918893.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:34.047Z,1516918894.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-25T22:21:34.048Z,1516918894.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:34.228Z,1516918894.228 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:34.229Z,1516918894.229 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:34.446Z,1516918894.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-25T22:21:34.447Z,1516918894.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:34.847Z,1516918894.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-25T22:21:34.848Z,1516918894.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:35.254Z,1516918895.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-25T22:21:35.255Z,1516918895.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:35.430Z,1516918895.430 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:35.431Z,1516918895.431 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:35.646Z,1516918895.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-25T22:21:35.647Z,1516918895.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:36.053Z,1516918896.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-25T22:21:36.054Z,1516918896.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:36.444Z,1516918896.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-25T22:21:36.445Z,1516918896.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:36.630Z,1516918896.630 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:36.631Z,1516918896.631 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:36.843Z,1516918896.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-25T22:21:36.844Z,1516918896.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:37.236Z,1516918897.236 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:37.237Z,1516918897.237 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:37.274Z,1516918897.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-25T22:21:37.275Z,1516918897.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:37.645Z,1516918897.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-25T22:21:37.646Z,1516918897.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:38.048Z,1516918898.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-25T22:21:38.049Z,1516918898.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:38.438Z,1516918898.438 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:38.439Z,1516918898.439 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:38.458Z,1516918898.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-25T22:21:38.459Z,1516918898.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:38.854Z,1516918898.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-25T22:21:38.855Z,1516918898.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:39.253Z,1516918899.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-25T22:21:39.254Z,1516918899.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:39.646Z,1516918899.646 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:39.647Z,1516918899.647 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:39.658Z,1516918899.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-25T22:21:39.659Z,1516918899.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:40.040Z,1516918900.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-25T22:21:40.053Z,1516918900.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:40.237Z,1516918900.237 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:21:40.238Z,1516918900.238 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:40.463Z,1516918900.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-25T22:21:40.464Z,1516918900.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:40.834Z,1516918900.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-25T22:21:40.835Z,1516918900.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:41.244Z,1516918901.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-25T22:21:41.265Z,1516918901.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:41.438Z,1516918901.438 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:41.439Z,1516918901.439 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:41.636Z,1516918901.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-25T22:21:41.637Z,1516918901.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:42.045Z,1516918902.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-25T22:21:42.046Z,1516918902.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:42.436Z,1516918902.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-25T22:21:42.437Z,1516918902.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:42.638Z,1516918902.638 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:42.639Z,1516918902.639 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:42.834Z,1516918902.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-25T22:21:42.835Z,1516918902.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:43.242Z,1516918903.242 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:43.243Z,1516918903.243 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:43.255Z,1516918903.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-25T22:21:43.256Z,1516918903.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:43.639Z,1516918903.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-25T22:21:43.640Z,1516918903.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:44.039Z,1516918904.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-25T22:21:44.040Z,1516918904.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:44.443Z,1516918904.443 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:44.444Z,1516918904.444 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:44.462Z,1516918904.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-25T22:21:44.463Z,1516918904.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:44.835Z,1516918904.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-25T22:21:44.836Z,1516918904.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:45.256Z,1516918905.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-25T22:21:45.265Z,1516918905.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:45.642Z,1516918905.642 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:45.643Z,1516918905.643 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:45.646Z,1516918905.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-25T22:21:45.647Z,1516918905.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:46.047Z,1516918906.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-25T22:21:46.048Z,1516918906.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:46.246Z,1516918906.246 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:21:46.248Z,1516918906.248 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:46.446Z,1516918906.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-25T22:21:46.447Z,1516918906.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:46.857Z,1516918906.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-25T22:21:46.858Z,1516918906.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:47.251Z,1516918907.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-25T22:21:47.252Z,1516918907.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:47.446Z,1516918907.446 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:21:47.447Z,1516918907.447 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:47.655Z,1516918907.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-25T22:21:47.656Z,1516918907.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:48.056Z,1516918908.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-25T22:21:48.057Z,1516918908.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:48.454Z,1516918908.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-01-25T22:21:48.455Z,1516918908.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:48.646Z,1516918908.646 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:48.647Z,1516918908.647 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:48.840Z,1516918908.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-01-25T22:21:48.857Z,1516918908.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:49.251Z,1516918909.251 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:49.253Z,1516918909.253 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:50.454Z,1516918910.454 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:50.455Z,1516918910.455 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:51.654Z,1516918911.654 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:51.655Z,1516918911.655 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:52.118Z,1516918912.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:52.257Z,1516918912.257 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:21:52.258Z,1516918912.258 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:52.290Z,1516918912.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:52.588Z,1516918912.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:52.991Z,1516918912.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:53.382Z,1516918913.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:53.458Z,1516918913.458 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:53.459Z,1516918913.459 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:53.787Z,1516918913.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:54.187Z,1516918914.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:54.582Z,1516918914.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:54.658Z,1516918914.658 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:54.659Z,1516918914.659 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:54.997Z,1516918914.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:55.288Z,1516918915.288 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:21:55.290Z,1516918915.290 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:55.401Z,1516918915.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:55.791Z,1516918915.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:56.181Z,1516918916.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:56.490Z,1516918916.490 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:56.491Z,1516918916.491 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:56.594Z,1516918916.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:56.991Z,1516918916.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:57.263Z,1516918917.263 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:21:57.265Z,1516918917.265 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:57.386Z,1516918917.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:57.796Z,1516918917.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:58.194Z,1516918918.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:58.466Z,1516918918.466 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:58.467Z,1516918918.467 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:58.605Z,1516918918.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:58.994Z,1516918918.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:59.391Z,1516918919.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:21:59.666Z,1516918919.666 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:21:59.667Z,1516918919.667 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:21:59.795Z,1516918919.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:00.199Z,1516918920.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:00.268Z,1516918920.268 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:22:00.270Z,1516918920.270 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:00.578Z,1516918920.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:00.983Z,1516918920.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:01.412Z,1516918921.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:01.470Z,1516918921.470 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:22:01.471Z,1516918921.471 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:01.791Z,1516918921.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:02.186Z,1516918922.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:02.586Z,1516918922.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:02.670Z,1516918922.670 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:22:02.671Z,1516918922.671 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:02.990Z,1516918922.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:03.273Z,1516918923.273 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:22:03.274Z,1516918923.274 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:03.383Z,1516918923.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:03.804Z,1516918923.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:04.194Z,1516918924.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:04.474Z,1516918924.474 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:22:04.475Z,1516918924.475 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:04.593Z,1516918924.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:04.997Z,1516918924.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:05.380Z,1516918925.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:05.674Z,1516918925.674 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:22:05.675Z,1516918925.675 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:05.793Z,1516918925.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:06.190Z,1516918926.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:06.278Z,1516918926.278 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:22:06.279Z,1516918926.279 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:06.580Z,1516918926.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:07.002Z,1516918927.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:07.394Z,1516918927.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:07.478Z,1516918927.478 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:22:07.479Z,1516918927.479 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:07.791Z,1516918927.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:08.184Z,1516918928.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:08.592Z,1516918928.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:08.678Z,1516918928.678 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:22:08.679Z,1516918928.679 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:08.981Z,1516918928.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:09.282Z,1516918929.282 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:22:09.283Z,1516918929.283 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:09.390Z,1516918929.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:09.825Z,1516918929.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:10.195Z,1516918930.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:10.482Z,1516918930.482 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:22:10.483Z,1516918930.483 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:10.595Z,1516918930.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:10.991Z,1516918930.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:11.381Z,1516918931.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:11.682Z,1516918931.682 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:22:11.683Z,1516918931.683 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:11.784Z,1516918931.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:12.190Z,1516918932.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:12.286Z,1516918932.286 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:22:12.288Z,1516918932.288 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:12.580Z,1516918932.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:12.991Z,1516918932.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:13.406Z,1516918933.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:13.486Z,1516918933.486 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:22:13.487Z,1516918933.487 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:13.791Z,1516918933.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:14.191Z,1516918934.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:14.593Z,1516918934.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:14.686Z,1516918934.686 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:22:14.687Z,1516918934.687 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:14.991Z,1516918934.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:15.291Z,1516918935.291 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:22:15.293Z,1516918935.293 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:15.378Z,1516918935.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:15.800Z,1516918935.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:16.203Z,1516918936.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:16.495Z,1516918936.495 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:22:16.497Z,1516918936.497 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:16.604Z,1516918936.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:16.986Z,1516918936.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:17.378Z,1516918937.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:17.698Z,1516918937.698 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:22:17.699Z,1516918937.699 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:17.782Z,1516918937.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:18.194Z,1516918938.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:18.296Z,1516918938.296 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:22:18.297Z,1516918938.297 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:18.589Z,1516918938.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:18.994Z,1516918938.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:19.390Z,1516918939.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:19.498Z,1516918939.498 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:22:19.499Z,1516918939.499 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:19.795Z,1516918939.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:20.180Z,1516918940.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:20.586Z,1516918940.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:20.698Z,1516918940.698 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:22:20.699Z,1516918940.699 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:20.984Z,1516918940.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:21.300Z,1516918941.300 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:22:21.302Z,1516918941.302 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:21.384Z,1516918941.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:21.800Z,1516918941.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:22.194Z,1516918942.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:22.502Z,1516918942.502 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:22:22.503Z,1516918942.503 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:22.593Z,1516918942.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:22.993Z,1516918942.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:23.380Z,1516918943.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:23.703Z,1516918943.703 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:22:23.704Z,1516918943.704 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:23.793Z,1516918943.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:24.190Z,1516918944.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:24.305Z,1516918944.305 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:22:24.306Z,1516918944.306 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:24.580Z,1516918944.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:24.990Z,1516918944.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:25.402Z,1516918945.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:25.506Z,1516918945.506 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:22:25.507Z,1516918945.507 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:25.791Z,1516918945.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:26.181Z,1516918946.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:26.592Z,1516918946.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:26.706Z,1516918946.706 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:22:26.707Z,1516918946.707 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:26.986Z,1516918946.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:27.310Z,1516918947.310 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:22:27.311Z,1516918947.311 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:27.393Z,1516918947.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:27.799Z,1516918947.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:28.198Z,1516918948.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:28.510Z,1516918948.510 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:22:28.511Z,1516918948.511 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:28.593Z,1516918948.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:28.990Z,1516918948.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:29.390Z,1516918949.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:29.710Z,1516918949.710 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:22:29.711Z,1516918949.711 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:29.779Z,1516918949.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:30.175Z,1516918950.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:30.314Z,1516918950.314 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:22:30.316Z,1516918950.316 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:30.575Z,1516918950.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:30.000Z,1516918951.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:31.398Z,1516918951.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:31.514Z,1516918951.514 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:22:31.515Z,1516918951.515 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:31.795Z,1516918951.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:32.182Z,1516918952.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:32.582Z,1516918952.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:32.714Z,1516918952.714 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:22:32.715Z,1516918952.715 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:32.982Z,1516918952.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:33.319Z,1516918953.319 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:22:33.320Z,1516918953.320 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:33.401Z,1516918953.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:33.788Z,1516918953.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:34.191Z,1516918954.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:34.522Z,1516918954.522 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:22:34.523Z,1516918954.523 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:34.602Z,1516918954.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:34.993Z,1516918954.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:35.382Z,1516918955.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:35.722Z,1516918955.722 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:22:35.723Z,1516918955.723 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:35.788Z,1516918955.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:36.189Z,1516918956.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:36.324Z,1516918956.324 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:22:36.325Z,1516918956.325 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:36.591Z,1516918956.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:36.990Z,1516918956.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:37.396Z,1516918957.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:37.526Z,1516918957.526 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:22:37.527Z,1516918957.527 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:37.791Z,1516918957.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:38.179Z,1516918958.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:38.586Z,1516918958.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:38.726Z,1516918958.726 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:22:38.727Z,1516918958.727 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:38.991Z,1516918958.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:39.328Z,1516918959.328 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:22:39.330Z,1516918959.330 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:39.401Z,1516918959.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:39.796Z,1516918959.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:40.193Z,1516918960.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:40.530Z,1516918960.530 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:22:40.531Z,1516918960.531 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:40.614Z,1516918960.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:40.994Z,1516918960.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:41.381Z,1516918961.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:41.730Z,1516918961.730 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:22:41.731Z,1516918961.731 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:41.802Z,1516918961.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:42.178Z,1516918962.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:42.333Z,1516918962.333 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:22:42.334Z,1516918962.334 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:42.578Z,1516918962.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:42.987Z,1516918962.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:43.391Z,1516918963.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:43.534Z,1516918963.534 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:22:43.535Z,1516918963.535 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:43.812Z,1516918963.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:44.180Z,1516918964.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:44.579Z,1516918964.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:44.734Z,1516918964.734 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:22:44.735Z,1516918964.735 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:44.979Z,1516918964.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:45.341Z,1516918965.341 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:22:45.342Z,1516918965.342 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:45.407Z,1516918965.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:45.787Z,1516918965.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:46.191Z,1516918966.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:46.542Z,1516918966.542 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:22:46.543Z,1516918966.543 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:46.604Z,1516918966.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:46.993Z,1516918966.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:47.385Z,1516918967.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:47.742Z,1516918967.742 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:22:47.743Z,1516918967.743 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:47.797Z,1516918967.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:48.194Z,1516918968.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:48.342Z,1516918968.342 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:22:48.344Z,1516918968.344 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:48.581Z,1516918968.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:48.995Z,1516918968.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:49.542Z,1516918969.542 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:22:49.543Z,1516918969.543 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:50.742Z,1516918970.742 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:22:50.743Z,1516918970.743 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:51.347Z,1516918971.347 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:22:51.348Z,1516918971.348 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:52.236Z,1516918972.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:52.378Z,1516918972.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:52.550Z,1516918972.550 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:22:52.551Z,1516918972.551 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:52.700Z,1516918972.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:53.109Z,1516918973.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:53.496Z,1516918973.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:53.750Z,1516918973.750 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:22:53.751Z,1516918973.751 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:53.910Z,1516918973.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:54.311Z,1516918974.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:54.352Z,1516918974.352 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:22:54.353Z,1516918974.353 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:54.707Z,1516918974.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:55.096Z,1516918975.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:55.506Z,1516918975.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:55.554Z,1516918975.554 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:22:55.555Z,1516918975.555 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:55.907Z,1516918975.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:56.307Z,1516918976.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:56.709Z,1516918976.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:56.754Z,1516918976.754 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:22:56.755Z,1516918976.755 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:57.107Z,1516918977.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:57.356Z,1516918977.356 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:22:57.357Z,1516918977.357 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:57.513Z,1516918977.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:57.918Z,1516918977.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:58.307Z,1516918978.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:58.558Z,1516918978.558 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:22:58.559Z,1516918978.559 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:58.707Z,1516918978.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:59.109Z,1516918979.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:59.507Z,1516918979.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:22:59.758Z,1516918979.758 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:22:59.759Z,1516918979.759 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:22:59.913Z,1516918979.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:00.303Z,1516918980.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:00.361Z,1516918980.361 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:00.362Z,1516918980.362 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:00.707Z,1516918980.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:01.107Z,1516918981.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:01.509Z,1516918981.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:01.562Z,1516918981.562 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:01.563Z,1516918981.563 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:01.907Z,1516918981.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:02.307Z,1516918982.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:02.709Z,1516918982.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:02.762Z,1516918982.762 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:02.763Z,1516918982.763 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:03.107Z,1516918983.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:03.365Z,1516918983.365 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:03.367Z,1516918983.367 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:03.513Z,1516918983.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:03.915Z,1516918983.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:04.300Z,1516918984.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:04.566Z,1516918984.566 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:04.567Z,1516918984.567 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:04.711Z,1516918984.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:05.114Z,1516918985.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:05.494Z,1516918985.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:05.766Z,1516918985.766 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:05.767Z,1516918985.767 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:05.899Z,1516918985.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:06.324Z,1516918986.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:06.370Z,1516918986.370 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:06.371Z,1516918986.371 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:06.711Z,1516918986.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:07.099Z,1516918987.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:07.502Z,1516918987.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:07.570Z,1516918987.570 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:07.571Z,1516918987.571 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:07.895Z,1516918987.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:08.306Z,1516918988.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:08.699Z,1516918988.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:08.770Z,1516918988.770 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:08.771Z,1516918988.771 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:09.106Z,1516918989.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:09.375Z,1516918989.375 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:09.376Z,1516918989.376 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:09.507Z,1516918989.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:09.907Z,1516918989.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:10.295Z,1516918990.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:10.575Z,1516918990.575 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:10.577Z,1516918990.577 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:10.700Z,1516918990.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:11.109Z,1516918991.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:11.496Z,1516918991.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:11.778Z,1516918991.778 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:11.779Z,1516918991.779 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:11.914Z,1516918991.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:12.318Z,1516918992.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:12.380Z,1516918992.380 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:12.381Z,1516918992.381 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:12.716Z,1516918992.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:13.106Z,1516918993.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:13.509Z,1516918993.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:13.582Z,1516918993.582 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:13.584Z,1516918993.584 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:13.906Z,1516918993.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:14.306Z,1516918994.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:14.714Z,1516918994.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:14.782Z,1516918994.782 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:14.784Z,1516918994.784 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:15.115Z,1516918995.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:15.384Z,1516918995.384 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:15.385Z,1516918995.385 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:15.517Z,1516918995.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:15.900Z,1516918995.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:16.298Z,1516918996.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:16.586Z,1516918996.586 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:16.587Z,1516918996.587 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:16.702Z,1516918996.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:17.094Z,1516918997.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:17.502Z,1516918997.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:17.787Z,1516918997.787 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:17.788Z,1516918997.788 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:17.917Z,1516918997.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:18.310Z,1516918998.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:18.389Z,1516918998.389 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:18.390Z,1516918998.390 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:18.710Z,1516918998.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:19.106Z,1516918999.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:19.501Z,1516918999.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:19.590Z,1516918999.590 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:19.591Z,1516918999.591 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:19.897Z,1516918999.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:20.298Z,1516919000.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:20.710Z,1516919000.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:20.790Z,1516919000.790 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:20.791Z,1516919000.791 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:21.107Z,1516919001.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:21.393Z,1516919001.393 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:21.395Z,1516919001.395 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:21.513Z,1516919001.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:21.907Z,1516919001.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:22.297Z,1516919002.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:22.594Z,1516919002.594 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:22.595Z,1516919002.595 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:22.709Z,1516919002.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:23.106Z,1516919003.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:23.502Z,1516919003.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:23.794Z,1516919003.794 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:23.795Z,1516919003.795 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:23.920Z,1516919003.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:24.315Z,1516919004.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:24.398Z,1516919004.398 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:24.399Z,1516919004.399 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:24.711Z,1516919004.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:25.094Z,1516919005.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:25.494Z,1516919005.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:25.598Z,1516919005.598 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:25.599Z,1516919005.599 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:25.906Z,1516919005.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:26.300Z,1516919006.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:26.696Z,1516919006.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:26.798Z,1516919006.798 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:26.799Z,1516919006.799 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:27.106Z,1516919007.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:27.402Z,1516919007.402 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:27.404Z,1516919007.404 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:27.508Z,1516919007.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:27.908Z,1516919007.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:28.295Z,1516919008.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:28.602Z,1516919008.602 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:28.603Z,1516919008.603 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:28.700Z,1516919008.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:29.102Z,1516919009.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:29.497Z,1516919009.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:29.802Z,1516919009.802 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:29.803Z,1516919009.803 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:29.915Z,1516919009.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:30.315Z,1516919010.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:30.407Z,1516919010.407 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:30.408Z,1516919010.408 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:30.707Z,1516919010.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:31.101Z,1516919011.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:31.507Z,1516919011.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:31.611Z,1516919011.611 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:31.612Z,1516919011.612 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:31.909Z,1516919011.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:32.297Z,1516919012.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:32.706Z,1516919012.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:32.810Z,1516919012.810 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:32.811Z,1516919012.811 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:33.107Z,1516919013.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:33.412Z,1516919013.412 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:33.413Z,1516919013.413 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:33.512Z,1516919013.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:33.910Z,1516919013.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:34.296Z,1516919014.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:34.614Z,1516919014.614 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:34.615Z,1516919014.615 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:34.709Z,1516919014.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:35.108Z,1516919015.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:35.496Z,1516919015.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:35.814Z,1516919015.814 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:35.815Z,1516919015.815 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:35.909Z,1516919015.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:36.310Z,1516919016.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:36.416Z,1516919016.416 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:36.418Z,1516919016.418 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:36.707Z,1516919016.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:37.096Z,1516919017.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:37.499Z,1516919017.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:37.618Z,1516919017.618 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:37.619Z,1516919017.619 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:37.901Z,1516919017.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:38.297Z,1516919018.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:38.706Z,1516919018.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:38.819Z,1516919018.819 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:38.820Z,1516919018.820 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:39.107Z,1516919019.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:39.421Z,1516919019.421 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:39.422Z,1516919019.422 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:39.513Z,1516919019.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:39.917Z,1516919019.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:40.296Z,1516919020.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:40.622Z,1516919020.622 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:40.623Z,1516919020.623 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:40.700Z,1516919020.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:41.104Z,1516919021.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:41.501Z,1516919021.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:41.822Z,1516919021.822 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:41.823Z,1516919021.823 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:41.911Z,1516919021.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:42.316Z,1516919022.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:42.426Z,1516919022.426 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:42.427Z,1516919022.427 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:42.710Z,1516919022.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:43.107Z,1516919023.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:43.509Z,1516919023.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:43.626Z,1516919023.626 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:43.627Z,1516919023.627 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:43.907Z,1516919023.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:44.307Z,1516919024.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:44.709Z,1516919024.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:44.826Z,1516919024.826 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:44.827Z,1516919024.827 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:45.107Z,1516919025.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:45.430Z,1516919025.430 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:45.432Z,1516919025.432 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:45.517Z,1516919025.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:45.914Z,1516919025.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:46.306Z,1516919026.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:46.630Z,1516919026.630 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:46.631Z,1516919026.631 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:46.710Z,1516919026.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:47.094Z,1516919027.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:47.494Z,1516919027.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:47.830Z,1516919027.830 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:47.831Z,1516919027.831 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:47.905Z,1516919027.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:48.322Z,1516919028.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:48.435Z,1516919028.435 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:48.436Z,1516919028.436 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:48.719Z,1516919028.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:49.099Z,1516919029.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:49.634Z,1516919029.634 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:49.635Z,1516919029.635 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:50.834Z,1516919030.834 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:50.835Z,1516919030.835 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:51.440Z,1516919031.440 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:51.441Z,1516919031.441 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:52.340Z,1516919032.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:52.482Z,1516919032.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:52.642Z,1516919032.642 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:52.643Z,1516919032.643 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:52.834Z,1516919032.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:53.233Z,1516919033.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:53.608Z,1516919033.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:53.842Z,1516919033.842 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:53.844Z,1516919033.844 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:54.010Z,1516919034.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:54.406Z,1516919034.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:54.444Z,1516919034.444 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:54.447Z,1516919034.447 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:54.810Z,1516919034.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:55.215Z,1516919035.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:55.622Z,1516919035.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:55.646Z,1516919035.646 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:55.647Z,1516919035.647 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:56.012Z,1516919036.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:56.411Z,1516919036.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:56.814Z,1516919036.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:56.858Z,1516919036.858 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:56.859Z,1516919036.859 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:57.211Z,1516919037.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:57.450Z,1516919037.450 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:57.451Z,1516919037.451 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:57.608Z,1516919037.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:57.962Z,1516919037.962 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-25T22:23:57.962Z,1516919037.962 [NAL9602] Data Fault, FailCount= 1
2018-01-25T22:23:57.962Z,1516919037.962 [NAL9602](ERROR): Data Fault
2018-01-25T22:23:58.026Z,1516919038.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:58.039Z,1516919038.039 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-25T22:23:58.362Z,1516919038.362 [NAL9602](INFO): Powering down
2018-01-25T22:23:58.398Z,1516919038.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:58.650Z,1516919038.650 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:58.651Z,1516919038.651 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:23:58.804Z,1516919038.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:59.197Z,1516919039.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:59.233Z,1516919039.233 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-25T22:23:59.233Z,1516919039.233 [NAL9602] No Fault, FailCount= 1
2018-01-25T22:23:59.600Z,1516919039.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:23:59.850Z,1516919039.850 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:23:59.851Z,1516919039.851 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:00.010Z,1516919040.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:00.406Z,1516919040.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:00.453Z,1516919040.453 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:00.455Z,1516919040.455 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:00.812Z,1516919040.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:01.210Z,1516919041.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:01.612Z,1516919041.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:01.654Z,1516919041.654 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:01.655Z,1516919041.655 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:02.011Z,1516919042.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:02.411Z,1516919042.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:02.813Z,1516919042.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:02.854Z,1516919042.854 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:02.855Z,1516919042.855 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:03.211Z,1516919043.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:03.486Z,1516919043.486 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:03.487Z,1516919043.487 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:03.610Z,1516919043.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:04.019Z,1516919044.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:04.418Z,1516919044.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:04.686Z,1516919044.686 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010786 psu
2018-01-25T22:24:04.687Z,1516919044.687 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:04.815Z,1516919044.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:05.219Z,1516919045.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:05.461Z,1516919045.461 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:05.462Z,1516919045.462 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:05.618Z,1516919045.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:05.998Z,1516919045.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:06.398Z,1516919046.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:06.663Z,1516919046.663 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:06.665Z,1516919046.665 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:06.798Z,1516919046.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:07.206Z,1516919047.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:07.602Z,1516919047.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:07.866Z,1516919047.866 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:07.867Z,1516919047.867 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:08.002Z,1516919048.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:08.401Z,1516919048.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:08.466Z,1516919048.466 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:08.467Z,1516919048.467 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:08.806Z,1516919048.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:09.202Z,1516919049.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:09.602Z,1516919049.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:09.666Z,1516919049.666 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:09.667Z,1516919049.667 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:10.010Z,1516919050.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:10.402Z,1516919050.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:10.811Z,1516919050.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:10.866Z,1516919050.866 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:10.867Z,1516919050.867 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:11.211Z,1516919051.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:11.470Z,1516919051.470 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:11.472Z,1516919051.472 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:11.604Z,1516919051.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:12.002Z,1516919052.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:12.412Z,1516919052.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:12.670Z,1516919052.670 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:12.671Z,1516919052.671 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:12.813Z,1516919052.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:13.211Z,1516919053.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:13.613Z,1516919053.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:13.870Z,1516919053.870 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:13.871Z,1516919053.871 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:14.002Z,1516919054.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:14.414Z,1516919054.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:14.475Z,1516919054.475 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:14.478Z,1516919054.478 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:14.810Z,1516919054.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:15.202Z,1516919055.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:15.611Z,1516919055.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:15.678Z,1516919055.678 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:15.679Z,1516919055.679 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:16.011Z,1516919056.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:16.405Z,1516919056.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:16.817Z,1516919056.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:16.878Z,1516919056.878 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:16.879Z,1516919056.879 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:17.222Z,1516919057.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:17.480Z,1516919057.480 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:17.481Z,1516919057.481 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:17.614Z,1516919057.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:17.998Z,1516919057.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:18.398Z,1516919058.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:18.682Z,1516919058.682 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:18.683Z,1516919058.683 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:18.799Z,1516919058.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:19.200Z,1516919059.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:19.599Z,1516919059.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:19.882Z,1516919059.882 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:19.883Z,1516919059.883 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:19.996Z,1516919059.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:20.400Z,1516919060.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:20.484Z,1516919060.484 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:20.486Z,1516919060.486 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:20.801Z,1516919060.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:21.196Z,1516919061.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:21.600Z,1516919061.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:21.686Z,1516919061.686 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:21.687Z,1516919061.687 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:22.003Z,1516919062.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:22.396Z,1516919062.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:22.800Z,1516919062.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:22.886Z,1516919062.886 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:22.887Z,1516919062.887 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:23.201Z,1516919063.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:23.489Z,1516919063.489 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:23.490Z,1516919063.490 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:23.595Z,1516919063.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:24.000Z,1516919064.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:24.400Z,1516919064.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:24.690Z,1516919064.690 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:24.691Z,1516919064.691 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:24.806Z,1516919064.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:25.196Z,1516919065.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:25.599Z,1516919065.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:25.890Z,1516919065.890 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:25.891Z,1516919065.891 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:25.996Z,1516919065.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:26.400Z,1516919066.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:26.494Z,1516919066.494 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:26.495Z,1516919066.495 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:26.801Z,1516919066.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:27.196Z,1516919067.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:27.600Z,1516919067.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:27.694Z,1516919067.694 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:27.695Z,1516919067.695 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:28.003Z,1516919068.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:28.365Z,1516919068.365 [NAL9602](INFO): Powering up NAL9602
2018-01-25T22:24:28.402Z,1516919068.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:28.800Z,1516919068.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:28.894Z,1516919068.894 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:28.895Z,1516919068.895 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:29.201Z,1516919069.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:29.498Z,1516919069.498 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:29.499Z,1516919069.499 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:29.599Z,1516919069.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:30.001Z,1516919070.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:30.399Z,1516919070.399 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:30.399Z,1516919070.399 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 22
2018-01-25T22:24:30.399Z,1516919070.399 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-25T22:24:30.401Z,1516919070.401 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:30.401Z,1516919070.401 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 22
2018-01-25T22:24:30.401Z,1516919070.401 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-25T22:24:30.403Z,1516919070.403 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:30.403Z,1516919070.403 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 22
2018-01-25T22:24:30.403Z,1516919070.403 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-25T22:24:30.447Z,1516919070.447 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-25T22:24:30.447Z,1516919070.447 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-25T22:24:30.447Z,1516919070.447 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-25T22:24:30.698Z,1516919070.698 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:30.699Z,1516919070.699 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:30.831Z,1516919070.831 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-25T22:24:30.831Z,1516919070.831 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 22
2018-01-25T22:24:30.831Z,1516919070.831 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-25T22:24:30.831Z,1516919070.831 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 22
2018-01-25T22:24:30.832Z,1516919070.832 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-25T22:24:30.832Z,1516919070.832 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 22
2018-01-25T22:24:31.209Z,1516919071.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-25T22:24:31.209Z,1516919071.209 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T22:24:31.210Z,1516919071.210 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T22:24:31.210Z,1516919071.210 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-25T22:24:31.211Z,1516919071.211 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T22:24:31.211Z,1516919071.211 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T22:24:31.211Z,1516919071.211 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-25T22:24:31.212Z,1516919071.212 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T22:24:31.212Z,1516919071.212 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T22:24:31.612Z,1516919071.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-25T22:24:31.613Z,1516919071.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:31.898Z,1516919071.898 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:31.899Z,1516919071.899 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:31.994Z,1516919071.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-25T22:24:31.995Z,1516919071.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:32.422Z,1516919072.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-25T22:24:32.423Z,1516919072.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:32.505Z,1516919072.505 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:32.506Z,1516919072.506 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:32.797Z,1516919072.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-25T22:24:32.798Z,1516919072.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:33.193Z,1516919073.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-25T22:24:33.194Z,1516919073.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:33.618Z,1516919073.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-25T22:24:33.619Z,1516919073.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:33.707Z,1516919073.707 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:33.709Z,1516919073.709 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:33.997Z,1516919073.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-25T22:24:33.998Z,1516919073.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:34.397Z,1516919074.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-25T22:24:34.398Z,1516919074.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:34.800Z,1516919074.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-25T22:24:34.801Z,1516919074.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:34.911Z,1516919074.911 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:34.913Z,1516919074.913 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:35.196Z,1516919075.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-25T22:24:35.197Z,1516919075.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:35.507Z,1516919075.507 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:35.509Z,1516919075.509 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:35.597Z,1516919075.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-25T22:24:35.598Z,1516919075.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:36.002Z,1516919076.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-25T22:24:36.002Z,1516919076.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:36.399Z,1516919076.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-25T22:24:36.400Z,1516919076.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:36.710Z,1516919076.710 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:36.711Z,1516919076.711 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:36.801Z,1516919076.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-25T22:24:36.802Z,1516919076.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:37.200Z,1516919077.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-01-25T22:24:37.201Z,1516919077.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:37.605Z,1516919077.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-01-25T22:24:37.606Z,1516919077.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:37.910Z,1516919077.910 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:37.911Z,1516919077.911 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:37.995Z,1516919077.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-01-25T22:24:37.997Z,1516919077.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:38.406Z,1516919078.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-01-25T22:24:38.407Z,1516919078.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:38.512Z,1516919078.512 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:38.513Z,1516919078.513 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:38.810Z,1516919078.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-01-25T22:24:38.811Z,1516919078.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:39.162Z,1516919079.162 [NAL9602](INFO): NAL9602 initialized
2018-01-25T22:24:39.202Z,1516919079.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-01-25T22:24:39.203Z,1516919079.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:39.600Z,1516919079.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-01-25T22:24:39.605Z,1516919079.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:39.714Z,1516919079.714 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:39.715Z,1516919079.715 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:40.014Z,1516919080.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-01-25T22:24:40.015Z,1516919080.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:40.414Z,1516919080.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-01-25T22:24:40.415Z,1516919080.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:40.810Z,1516919080.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-01-25T22:24:40.811Z,1516919080.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:40.914Z,1516919080.914 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:40.915Z,1516919080.915 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:41.212Z,1516919081.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-01-25T22:24:41.213Z,1516919081.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:41.517Z,1516919081.517 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:41.518Z,1516919081.518 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:41.600Z,1516919081.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-01-25T22:24:41.601Z,1516919081.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:42.011Z,1516919082.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-01-25T22:24:42.012Z,1516919082.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:42.411Z,1516919082.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-01-25T22:24:42.412Z,1516919082.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:42.718Z,1516919082.718 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:42.719Z,1516919082.719 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:42.815Z,1516919082.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-01-25T22:24:42.816Z,1516919082.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:43.211Z,1516919083.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-01-25T22:24:43.212Z,1516919083.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:43.604Z,1516919083.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-01-25T22:24:43.605Z,1516919083.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:43.918Z,1516919083.918 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:43.919Z,1516919083.919 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:44.001Z,1516919084.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-01-25T22:24:44.002Z,1516919084.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:44.412Z,1516919084.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-01-25T22:24:44.413Z,1516919084.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:44.522Z,1516919084.522 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:44.523Z,1516919084.523 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:44.804Z,1516919084.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-01-25T22:24:44.805Z,1516919084.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:45.211Z,1516919085.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-01-25T22:24:45.212Z,1516919085.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:45.622Z,1516919085.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-01-25T22:24:45.623Z,1516919085.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:45.722Z,1516919085.722 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:45.723Z,1516919085.723 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:46.014Z,1516919086.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-01-25T22:24:46.015Z,1516919086.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:46.410Z,1516919086.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-01-25T22:24:46.411Z,1516919086.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:46.819Z,1516919086.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-01-25T22:24:46.820Z,1516919086.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:46.922Z,1516919086.922 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:46.923Z,1516919086.923 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:47.218Z,1516919087.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-01-25T22:24:47.219Z,1516919087.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:47.526Z,1516919087.526 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:47.527Z,1516919087.527 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:47.607Z,1516919087.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-01-25T22:24:47.608Z,1516919087.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:48.002Z,1516919088.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-01-25T22:24:48.002Z,1516919088.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:48.421Z,1516919088.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-01-25T22:24:48.422Z,1516919088.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:48.429Z,1516919088.429 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-25T22:24:48.429Z,1516919088.429 [Default:CheckIn:C.Wait] Stopped
2018-01-25T22:24:48.429Z,1516919088.429 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-25T22:24:48.429Z,1516919088.429 [Default:CheckIn:D] Running Loop=1
2018-01-25T22:24:48.726Z,1516919088.726 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:48.727Z,1516919088.727 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:48.834Z,1516919088.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-01-25T22:24:48.835Z,1516919088.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:48.846Z,1516919088.846 [Default:CheckIn:D] Stopped
2018-01-25T22:24:48.846Z,1516919088.846 [Default:CheckIn:E] Running Loop=1
2018-01-25T22:24:49.211Z,1516919089.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-01-25T22:24:49.212Z,1516919089.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:49.216Z,1516919089.216 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 62.500000 min 
2018-01-25T22:24:49.216Z,1516919089.216 [Default:CheckIn:E] Stopped
2018-01-25T22:24:49.216Z,1516919089.216 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-25T22:24:49.216Z,1516919089.216 [Default:CheckIn] Stopped
2018-01-25T22:24:49.216Z,1516919089.216 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-25T22:24:49.216Z,1516919089.216 [Default:CheckIn](INFO): Running loop #7
2018-01-25T22:24:49.217Z,1516919089.217 [Default:CheckIn] Running Loop=7
2018-01-25T22:24:49.217Z,1516919089.217 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-25T22:24:49.217Z,1516919089.217 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-25T22:24:49.927Z,1516919089.927 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:49.928Z,1516919089.928 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:50.531Z,1516919090.531 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:50.532Z,1516919090.532 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:51.730Z,1516919091.730 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:51.731Z,1516919091.731 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:52.443Z,1516919092.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:52.594Z,1516919092.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:52.917Z,1516919092.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:52.930Z,1516919092.930 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:52.931Z,1516919092.931 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:53.322Z,1516919093.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:53.535Z,1516919093.535 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:53.537Z,1516919093.537 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:53.724Z,1516919093.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:54.104Z,1516919094.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:54.544Z,1516919094.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:54.738Z,1516919094.738 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:54.739Z,1516919094.739 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:54.919Z,1516919094.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:55.323Z,1516919095.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:55.731Z,1516919095.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:55.938Z,1516919095.938 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:55.939Z,1516919095.939 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:56.123Z,1516919096.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:56.540Z,1516919096.540 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:56.541Z,1516919096.541 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:56.544Z,1516919096.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:56.898Z,1516919096.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:57.306Z,1516919097.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:57.705Z,1516919097.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:57.742Z,1516919097.742 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:57.743Z,1516919097.743 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:58.129Z,1516919098.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:58.544Z,1516919098.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:58.921Z,1516919098.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:58.942Z,1516919098.942 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:58.944Z,1516919098.944 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:59.306Z,1516919099.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:24:59.545Z,1516919099.545 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:24:59.546Z,1516919099.546 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:24:59.716Z,1516919099.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:00.114Z,1516919100.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:00.540Z,1516919100.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:00.746Z,1516919100.746 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:00.747Z,1516919100.747 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:00.926Z,1516919100.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:01.306Z,1516919101.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:01.720Z,1516919101.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:01.946Z,1516919101.946 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:01.947Z,1516919101.947 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:02.126Z,1516919102.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:02.536Z,1516919102.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:02.549Z,1516919102.549 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:02.551Z,1516919102.551 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:02.933Z,1516919102.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:03.310Z,1516919103.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:03.696Z,1516919103.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:03.750Z,1516919103.750 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:03.751Z,1516919103.751 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:04.126Z,1516919104.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:04.558Z,1516919104.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:04.929Z,1516919104.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:04.950Z,1516919104.950 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:04.951Z,1516919104.951 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:05.308Z,1516919105.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:05.554Z,1516919105.554 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:05.555Z,1516919105.555 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:05.704Z,1516919105.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:06.115Z,1516919106.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:06.518Z,1516919106.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:06.754Z,1516919106.754 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:06.755Z,1516919106.755 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:06.926Z,1516919106.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:07.305Z,1516919107.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:07.712Z,1516919107.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:07.954Z,1516919107.954 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:07.955Z,1516919107.955 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:08.115Z,1516919108.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:08.522Z,1516919108.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:08.559Z,1516919108.559 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:08.560Z,1516919108.560 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:08.923Z,1516919108.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:09.311Z,1516919109.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:09.711Z,1516919109.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:09.758Z,1516919109.758 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:09.759Z,1516919109.759 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:10.131Z,1516919110.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:10.521Z,1516919110.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:10.924Z,1516919110.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:10.958Z,1516919110.958 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:10.960Z,1516919110.960 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:11.317Z,1516919111.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:11.563Z,1516919111.563 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:11.565Z,1516919111.565 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:11.715Z,1516919111.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:12.124Z,1516919112.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:12.526Z,1516919112.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:12.766Z,1516919112.766 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:12.767Z,1516919112.767 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:12.919Z,1516919112.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:13.305Z,1516919113.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:13.718Z,1516919113.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:13.966Z,1516919113.966 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:13.967Z,1516919113.967 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:14.120Z,1516919114.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:14.523Z,1516919114.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:14.568Z,1516919114.568 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:14.569Z,1516919114.569 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:14.912Z,1516919114.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:15.310Z,1516919115.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:15.705Z,1516919115.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:15.770Z,1516919115.770 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:15.771Z,1516919115.771 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:16.112Z,1516919116.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:16.511Z,1516919116.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:16.907Z,1516919116.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:16.970Z,1516919116.970 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:16.971Z,1516919116.971 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:17.304Z,1516919117.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:17.572Z,1516919117.572 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:17.574Z,1516919117.574 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:17.714Z,1516919117.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:18.122Z,1516919118.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:18.516Z,1516919118.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:18.774Z,1516919118.774 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:18.775Z,1516919118.775 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:18.926Z,1516919118.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:19.306Z,1516919119.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:19.712Z,1516919119.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:19.974Z,1516919119.974 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:19.975Z,1516919119.975 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:20.122Z,1516919120.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:20.517Z,1516919120.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:20.577Z,1516919120.577 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:20.578Z,1516919120.578 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:20.924Z,1516919120.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:21.306Z,1516919121.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:21.715Z,1516919121.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:21.778Z,1516919121.778 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:21.779Z,1516919121.779 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:22.130Z,1516919122.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:22.519Z,1516919122.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:22.923Z,1516919122.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:22.978Z,1516919122.978 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:22.979Z,1516919122.979 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:23.302Z,1516919123.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:23.582Z,1516919123.582 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:23.584Z,1516919123.584 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:23.702Z,1516919123.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:24.107Z,1516919124.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:24.533Z,1516919124.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:24.782Z,1516919124.782 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:24.784Z,1516919124.784 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:24.911Z,1516919124.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:25.310Z,1516919125.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:25.704Z,1516919125.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:25.982Z,1516919125.982 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:25.984Z,1516919125.984 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:26.133Z,1516919126.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:26.533Z,1516919126.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:26.586Z,1516919126.586 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:26.588Z,1516919126.588 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:26.920Z,1516919126.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:27.313Z,1516919127.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:27.706Z,1516919127.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:27.786Z,1516919127.786 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:27.787Z,1516919127.787 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:28.112Z,1516919128.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:28.511Z,1516919128.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:28.910Z,1516919128.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:28.986Z,1516919128.986 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:28.987Z,1516919128.987 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:29.313Z,1516919129.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:29.591Z,1516919129.591 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:29.592Z,1516919129.592 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:29.704Z,1516919129.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:30.122Z,1516919130.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:30.526Z,1516919130.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:30.790Z,1516919130.790 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:30.791Z,1516919130.791 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:30.922Z,1516919130.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:31.310Z,1516919131.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:31.712Z,1516919131.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:31.990Z,1516919131.990 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:31.991Z,1516919131.991 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:32.115Z,1516919132.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:32.518Z,1516919132.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:32.596Z,1516919132.596 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:32.597Z,1516919132.597 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:32.919Z,1516919132.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:33.310Z,1516919133.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:33.713Z,1516919133.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:33.798Z,1516919133.798 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:33.799Z,1516919133.799 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:34.121Z,1516919134.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:34.515Z,1516919134.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:34.922Z,1516919134.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:34.998Z,1516919134.998 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:34.999Z,1516919134.999 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:35.319Z,1516919135.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:35.600Z,1516919135.600 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:35.601Z,1516919135.601 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:35.715Z,1516919135.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:36.110Z,1516919136.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:36.515Z,1516919136.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:36.802Z,1516919136.802 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:36.804Z,1516919136.804 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:36.914Z,1516919136.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:37.326Z,1516919137.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:37.726Z,1516919137.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:38.002Z,1516919138.002 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:38.003Z,1516919138.003 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:38.117Z,1516919138.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:38.513Z,1516919138.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:38.605Z,1516919138.605 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:38.606Z,1516919138.606 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:38.919Z,1516919138.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:39.311Z,1516919139.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:39.713Z,1516919139.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:39.806Z,1516919139.806 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:39.808Z,1516919139.808 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:40.119Z,1516919140.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:40.516Z,1516919140.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:40.926Z,1516919140.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:41.006Z,1516919141.006 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:41.007Z,1516919141.007 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:41.320Z,1516919141.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:41.610Z,1516919141.610 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:41.611Z,1516919141.611 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:41.714Z,1516919141.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:42.114Z,1516919142.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:42.519Z,1516919142.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:42.810Z,1516919142.810 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:42.811Z,1516919142.811 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:42.918Z,1516919142.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:43.326Z,1516919143.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:43.719Z,1516919143.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:44.010Z,1516919144.010 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:44.011Z,1516919144.011 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:44.114Z,1516919144.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:44.511Z,1516919144.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:44.614Z,1516919144.614 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:44.615Z,1516919144.615 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:44.917Z,1516919144.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:45.311Z,1516919145.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:45.711Z,1516919145.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:45.814Z,1516919145.814 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:45.815Z,1516919145.815 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:46.117Z,1516919146.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:46.517Z,1516919146.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:46.917Z,1516919146.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:47.014Z,1516919147.014 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:47.015Z,1516919147.015 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:47.322Z,1516919147.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:47.619Z,1516919147.619 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:47.620Z,1516919147.620 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:47.714Z,1516919147.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:48.114Z,1516919148.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:48.518Z,1516919148.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:48.818Z,1516919148.818 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:48.819Z,1516919148.819 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:48.911Z,1516919148.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:49.320Z,1516919149.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:50.018Z,1516919150.018 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:50.019Z,1516919150.019 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:50.623Z,1516919150.623 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:50.625Z,1516919150.625 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:51.826Z,1516919151.826 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:51.827Z,1516919151.827 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:52.570Z,1516919152.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:52.714Z,1516919152.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:53.026Z,1516919153.026 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:53.027Z,1516919153.027 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:53.055Z,1516919153.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:53.449Z,1516919153.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:53.628Z,1516919153.628 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:53.629Z,1516919153.629 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:53.836Z,1516919153.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:54.249Z,1516919154.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:54.661Z,1516919154.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:54.830Z,1516919154.830 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:54.831Z,1516919154.831 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:55.048Z,1516919155.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:55.433Z,1516919155.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:55.843Z,1516919155.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:56.030Z,1516919156.030 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:56.031Z,1516919156.031 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:56.233Z,1516919156.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:56.636Z,1516919156.636 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:56.638Z,1516919156.638 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:56.662Z,1516919156.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:57.056Z,1516919157.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:57.444Z,1516919157.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:57.838Z,1516919157.838 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:57.839Z,1516919157.839 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:57.851Z,1516919157.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:58.254Z,1516919158.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:58.658Z,1516919158.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:59.038Z,1516919159.038 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:59.039Z,1516919159.039 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:59.050Z,1516919159.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:59.430Z,1516919159.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:25:59.637Z,1516919159.637 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:25:59.639Z,1516919159.639 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:25:59.830Z,1516919159.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:00.251Z,1516919160.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:00.662Z,1516919160.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:00.839Z,1516919160.839 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:00.841Z,1516919160.841 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:01.051Z,1516919161.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:01.438Z,1516919161.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:01.832Z,1516919161.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:02.042Z,1516919162.042 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:02.043Z,1516919162.043 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:02.238Z,1516919162.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:02.642Z,1516919162.642 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:02.643Z,1516919162.643 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:02.669Z,1516919162.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:03.038Z,1516919163.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:03.436Z,1516919163.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:03.839Z,1516919163.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:03.842Z,1516919163.842 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:03.843Z,1516919163.843 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:04.247Z,1516919164.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:04.658Z,1516919164.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:05.031Z,1516919165.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:05.042Z,1516919165.042 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:05.044Z,1516919165.044 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:05.432Z,1516919165.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:05.646Z,1516919165.646 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:05.648Z,1516919165.648 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:05.836Z,1516919165.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:06.246Z,1516919166.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:06.670Z,1516919166.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:06.846Z,1516919166.846 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:06.847Z,1516919166.847 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:07.050Z,1516919167.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:07.433Z,1516919167.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:07.838Z,1516919167.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:08.046Z,1516919168.046 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:08.047Z,1516919168.047 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:08.241Z,1516919168.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:08.651Z,1516919168.651 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:08.653Z,1516919168.653 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:08.658Z,1516919168.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:09.045Z,1516919169.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:09.445Z,1516919169.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:09.846Z,1516919169.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:09.854Z,1516919169.854 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:09.855Z,1516919169.855 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:10.254Z,1516919170.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:10.650Z,1516919170.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:11.047Z,1516919171.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:11.054Z,1516919171.054 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:11.055Z,1516919171.055 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:11.452Z,1516919171.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:11.684Z,1516919171.684 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:11.685Z,1516919171.685 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:11.847Z,1516919171.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:12.246Z,1516919172.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:12.673Z,1516919172.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:12.886Z,1516919172.886 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:12.887Z,1516919172.887 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:13.047Z,1516919173.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:13.425Z,1516919173.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:13.659Z,1516919173.659 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:13.660Z,1516919173.660 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:13.830Z,1516919173.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:14.230Z,1516919174.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:14.663Z,1516919174.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:14.858Z,1516919174.858 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:14.859Z,1516919174.859 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:15.034Z,1516919175.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:15.443Z,1516919175.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:15.839Z,1516919175.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:16.058Z,1516919176.058 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:16.059Z,1516919176.059 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:16.242Z,1516919176.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:16.632Z,1516919176.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:16.665Z,1516919176.665 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:16.666Z,1516919176.666 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:17.032Z,1516919177.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:17.432Z,1516919177.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:17.841Z,1516919177.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:17.866Z,1516919177.866 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:17.867Z,1516919177.867 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:18.246Z,1516919178.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:18.655Z,1516919178.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:19.046Z,1516919179.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:19.066Z,1516919179.066 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:19.067Z,1516919179.067 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:19.433Z,1516919179.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:19.668Z,1516919179.668 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:19.670Z,1516919179.670 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:19.847Z,1516919179.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:20.242Z,1516919180.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:20.667Z,1516919180.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:20.871Z,1516919180.871 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:20.873Z,1516919180.873 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:21.059Z,1516919181.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:21.439Z,1516919181.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:21.842Z,1516919181.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:22.075Z,1516919182.075 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:22.077Z,1516919182.077 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:22.254Z,1516919182.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:22.662Z,1516919182.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:22.673Z,1516919182.673 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:22.674Z,1516919182.674 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:23.051Z,1516919183.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:23.451Z,1516919183.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:23.846Z,1516919183.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:23.882Z,1516919183.882 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:23.883Z,1516919183.883 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:24.243Z,1516919184.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:24.676Z,1516919184.676 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:24.677Z,1516919184.677 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:24.688Z,1516919184.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:25.035Z,1516919185.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:25.438Z,1516919185.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:25.832Z,1516919185.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:25.878Z,1516919185.878 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:25.879Z,1516919185.879 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:26.254Z,1516919186.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:26.683Z,1516919186.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:27.050Z,1516919187.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:27.078Z,1516919187.078 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:27.079Z,1516919187.079 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:27.442Z,1516919187.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:27.681Z,1516919187.681 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:27.682Z,1516919187.682 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:27.837Z,1516919187.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:28.246Z,1516919188.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:28.648Z,1516919188.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:28.882Z,1516919188.882 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:28.883Z,1516919188.883 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:29.046Z,1516919189.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:29.442Z,1516919189.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:29.838Z,1516919189.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:30.082Z,1516919190.082 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:30.083Z,1516919190.083 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:30.254Z,1516919190.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:30.685Z,1516919190.685 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:30.687Z,1516919190.687 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:30.689Z,1516919190.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:31.049Z,1516919191.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:31.430Z,1516919191.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:31.830Z,1516919191.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:31.886Z,1516919191.886 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:31.887Z,1516919191.887 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:32.240Z,1516919192.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:32.643Z,1516919192.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:33.065Z,1516919193.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:33.086Z,1516919193.086 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:33.087Z,1516919193.087 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:33.438Z,1516919193.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:33.690Z,1516919193.690 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:33.691Z,1516919193.691 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:33.834Z,1516919193.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:34.240Z,1516919194.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:34.670Z,1516919194.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:34.890Z,1516919194.890 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:34.891Z,1516919194.891 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:35.036Z,1516919195.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:35.432Z,1516919195.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:35.832Z,1516919195.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:36.090Z,1516919196.090 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:36.091Z,1516919196.091 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:36.239Z,1516919196.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:36.640Z,1516919196.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:36.695Z,1516919196.695 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:36.697Z,1516919196.697 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:37.050Z,1516919197.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:37.436Z,1516919197.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:37.838Z,1516919197.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:37.898Z,1516919197.898 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:37.899Z,1516919197.899 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:38.243Z,1516919198.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:38.645Z,1516919198.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:39.053Z,1516919199.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:39.098Z,1516919199.098 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:39.099Z,1516919199.099 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:39.433Z,1516919199.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:39.699Z,1516919199.699 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:39.700Z,1516919199.700 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:39.836Z,1516919199.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:40.255Z,1516919200.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:40.645Z,1516919200.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:40.902Z,1516919200.902 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:40.903Z,1516919200.903 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:41.047Z,1516919201.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:41.438Z,1516919201.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:41.843Z,1516919201.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:42.102Z,1516919202.102 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:42.103Z,1516919202.103 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:42.246Z,1516919202.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:42.650Z,1516919202.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:42.704Z,1516919202.704 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:42.705Z,1516919202.705 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:43.043Z,1516919203.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:43.443Z,1516919203.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:43.845Z,1516919203.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:43.906Z,1516919203.906 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:43.907Z,1516919203.907 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:44.243Z,1516919204.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:44.647Z,1516919204.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:45.057Z,1516919205.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:45.106Z,1516919205.106 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:45.107Z,1516919205.107 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:45.430Z,1516919205.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:45.708Z,1516919205.708 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:45.710Z,1516919205.710 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:45.836Z,1516919205.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:46.260Z,1516919206.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:46.643Z,1516919206.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:46.910Z,1516919206.910 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:46.911Z,1516919206.911 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:47.040Z,1516919207.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:47.436Z,1516919207.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:47.833Z,1516919207.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:48.112Z,1516919208.112 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:48.113Z,1516919208.113 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:48.250Z,1516919208.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:48.656Z,1516919208.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:48.713Z,1516919208.713 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:48.714Z,1516919208.714 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:49.046Z,1516919209.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:49.436Z,1516919209.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:49.915Z,1516919209.915 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:49.916Z,1516919209.916 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:51.118Z,1516919211.118 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:51.119Z,1516919211.119 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:51.718Z,1516919211.718 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:51.719Z,1516919211.719 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:52.681Z,1516919212.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:52.838Z,1516919212.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:52.918Z,1516919212.918 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:52.919Z,1516919212.919 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:53.191Z,1516919213.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:53.596Z,1516919213.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:53.980Z,1516919213.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:54.120Z,1516919214.120 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010784 psu
2018-01-25T22:26:54.121Z,1516919214.121 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:54.391Z,1516919214.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:54.722Z,1516919214.722 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:54.723Z,1516919214.723 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:54.797Z,1516919214.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:55.190Z,1516919215.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:55.595Z,1516919215.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:55.922Z,1516919215.922 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:55.923Z,1516919215.923 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:55.000Z,1516919216.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:56.379Z,1516919216.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:56.783Z,1516919216.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:57.122Z,1516919217.122 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:57.123Z,1516919217.123 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:57.198Z,1516919217.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:57.576Z,1516919217.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:57.727Z,1516919217.727 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:57.728Z,1516919217.728 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:57.988Z,1516919217.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:58.395Z,1516919218.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:58.787Z,1516919218.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:58.926Z,1516919218.926 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:26:58.927Z,1516919218.927 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:26:59.184Z,1516919219.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:59.580Z,1516919219.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:26:59.975Z,1516919219.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:00.126Z,1516919220.126 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:27:00.127Z,1516919220.127 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:27:00.384Z,1516919220.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:00.731Z,1516919220.731 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:27:00.742Z,1516919220.742 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:27:00.806Z,1516919220.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:01.185Z,1516919221.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:01.598Z,1516919221.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:01.942Z,1516919221.942 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:27:01.943Z,1516919221.943 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:27:02.002Z,1516919222.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:02.389Z,1516919222.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:02.783Z,1516919222.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:03.145Z,1516919223.145 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:27:03.146Z,1516919223.146 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:27:03.198Z,1516919223.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:03.594Z,1516919223.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:03.736Z,1516919223.736 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:27:03.737Z,1516919223.737 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:27:03.998Z,1516919223.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:04.400Z,1516919224.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:04.803Z,1516919224.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:04.938Z,1516919224.938 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:27:04.939Z,1516919224.939 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:27:05.184Z,1516919225.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:05.577Z,1516919225.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:05.976Z,1516919225.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:06.140Z,1516919226.140 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:27:06.141Z,1516919226.141 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:27:06.386Z,1516919226.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:06.743Z,1516919226.743 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:27:06.768Z,1516919226.768 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:27:06.798Z,1516919226.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:07.190Z,1516919227.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:07.589Z,1516919227.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:07.967Z,1516919227.967 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:27:07.968Z,1516919227.968 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:27:08.014Z,1516919228.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:08.393Z,1516919228.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:08.748Z,1516919228.748 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:27:08.749Z,1516919228.749 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:27:08.814Z,1516919228.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:09.174Z,1516919229.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:09.574Z,1516919229.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:09.950Z,1516919229.950 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:27:09.951Z,1516919229.951 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:27:09.983Z,1516919229.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:10.405Z,1516919230.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:10.810Z,1516919230.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:11.154Z,1516919231.154 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010784 psu
2018-01-25T22:27:11.156Z,1516919231.156 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:27:11.187Z,1516919231.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:11.577Z,1516919231.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:11.749Z,1516919231.749 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010784 psu
2018-01-25T22:27:11.751Z,1516919231.751 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:27:11.976Z,1516919231.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:12.384Z,1516919232.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:12.785Z,1516919232.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:12.950Z,1516919232.950 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:27:12.951Z,1516919232.951 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:27:13.176Z,1516919233.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:13.580Z,1516919233.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:13.987Z,1516919233.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:14.150Z,1516919234.150 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:27:14.151Z,1516919234.151 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:27:14.379Z,1516919234.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:14.754Z,1516919234.754 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:27:14.755Z,1516919234.755 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:27:14.789Z,1516919234.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:15.182Z,1516919235.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:15.587Z,1516919235.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:15.959Z,1516919235.959 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:27:15.960Z,1516919235.960 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:27:15.986Z,1516919235.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:16.396Z,1516919236.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:16.806Z,1516919236.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:17.158Z,1516919237.158 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:27:17.159Z,1516919237.159 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:27:17.202Z,1516919237.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:17.591Z,1516919237.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:17.758Z,1516919237.758 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:27:17.759Z,1516919237.759 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:27:17.990Z,1516919237.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:18.369Z,1516919238.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:18.804Z,1516919238.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:18.958Z,1516919238.958 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:27:18.959Z,1516919238.959 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:27:19.173Z,1516919239.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:19.579Z,1516919239.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:20.005Z,1516919240.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:20.158Z,1516919240.158 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010784 psu
2018-01-25T22:27:20.159Z,1516919240.159 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:27:20.384Z,1516919240.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:20.764Z,1516919240.764 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:27:20.766Z,1516919240.766 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:27:20.813Z,1516919240.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:21.191Z,1516919241.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:21.586Z,1516919241.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:21.967Z,1516919241.967 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:27:21.968Z,1516919241.968 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:27:21.987Z,1516919241.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:22.397Z,1516919242.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:22.804Z,1516919242.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:23.166Z,1516919243.166 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:27:23.167Z,1516919243.167 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:27:23.197Z,1516919243.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:23.571Z,1516919243.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:23.767Z,1516919243.767 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:27:23.768Z,1516919243.768 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:27:23.975Z,1516919243.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:24.375Z,1516919244.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:24.804Z,1516919244.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:24.970Z,1516919244.970 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:27:24.971Z,1516919244.971 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:27:25.175Z,1516919245.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:25.603Z,1516919245.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:25.988Z,1516919245.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:26.170Z,1516919246.170 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:27:26.171Z,1516919246.171 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:27:26.385Z,1516919246.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:26.777Z,1516919246.777 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:27:26.778Z,1516919246.778 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:27:26.802Z,1516919246.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:27.180Z,1516919247.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:27.586Z,1516919247.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:27.975Z,1516919247.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:27.978Z,1516919247.978 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:27:27.979Z,1516919247.979 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:27:28.392Z,1516919248.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:28.803Z,1516919248.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:29.178Z,1516919249.178 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:27:29.179Z,1516919249.179 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:27:29.196Z,1516919249.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:29.570Z,1516919249.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:29.776Z,1516919249.776 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:27:29.778Z,1516919249.778 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:27:29.969Z,1516919249.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:30.374Z,1516919250.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:30.803Z,1516919250.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:30.978Z,1516919250.978 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:27:30.979Z,1516919250.979 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:27:31.178Z,1516919251.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:31.588Z,1516919251.588 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:31.588Z,1516919251.588 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 23
2018-01-25T22:27:31.588Z,1516919251.588 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-25T22:27:31.606Z,1516919251.606 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:31.606Z,1516919251.606 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 23
2018-01-25T22:27:31.606Z,1516919251.606 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-25T22:27:31.608Z,1516919251.608 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:31.608Z,1516919251.608 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 23
2018-01-25T22:27:31.608Z,1516919251.608 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-25T22:27:31.624Z,1516919251.624 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-25T22:27:31.629Z,1516919251.629 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-25T22:27:31.629Z,1516919251.629 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-25T22:27:32.018Z,1516919252.018 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-25T22:27:32.018Z,1516919252.018 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 23
2018-01-25T22:27:32.018Z,1516919252.018 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-25T22:27:32.018Z,1516919252.018 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 23
2018-01-25T22:27:32.019Z,1516919252.019 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-25T22:27:32.019Z,1516919252.019 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 23
2018-01-25T22:27:32.178Z,1516919252.178 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:27:32.179Z,1516919252.179 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:27:32.393Z,1516919252.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-25T22:27:32.394Z,1516919252.394 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T22:27:32.394Z,1516919252.394 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T22:27:32.394Z,1516919252.394 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-25T22:27:32.395Z,1516919252.395 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T22:27:32.395Z,1516919252.395 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T22:27:32.395Z,1516919252.395 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-25T22:27:32.396Z,1516919252.396 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-25T22:27:32.396Z,1516919252.396 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-25T22:27:32.784Z,1516919252.784 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:27:32.786Z,1516919252.786 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:27:32.802Z,1516919252.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-01-25T22:27:32.803Z,1516919252.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:33.179Z,1516919253.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-01-25T22:27:33.180Z,1516919253.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:33.576Z,1516919253.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-01-25T22:27:33.577Z,1516919253.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:33.982Z,1516919253.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-01-25T22:27:33.983Z,1516919253.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:33.986Z,1516919253.986 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010784 psu
2018-01-25T22:27:33.987Z,1516919253.987 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:27:34.396Z,1516919254.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-01-25T22:27:34.398Z,1516919254.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:34.806Z,1516919254.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-01-25T22:27:34.807Z,1516919254.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:35.186Z,1516919255.186 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:27:35.188Z,1516919255.188 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:27:35.190Z,1516919255.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-01-25T22:27:35.191Z,1516919255.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:35.598Z,1516919255.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-01-25T22:27:35.598Z,1516919255.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:35.786Z,1516919255.786 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:27:35.787Z,1516919255.787 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:27:35.975Z,1516919255.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-01-25T22:27:35.976Z,1516919255.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:36.370Z,1516919256.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-01-25T22:27:36.371Z,1516919256.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:36.674Z,1516919256.674 [CommandLine](IMPORTANT): got command quit
2018-01-25T22:27:36.773Z,1516919256.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-01-25T22:27:36.774Z,1516919256.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:36.987Z,1516919256.987 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010785 psu
2018-01-25T22:27:36.989Z,1516919256.989 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-25T22:27:37.182Z,1516919257.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-01-25T22:27:37.183Z,1516919257.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:37.584Z,1516919257.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-01-25T22:27:37.585Z,1516919257.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:37.683Z,1516919257.683 [CommandLine ThreadHandler](INFO): Uninitializing protected caller thread.
2018-01-25T22:27:37.684Z,1516919257.684 [CommandLine ThreadHandler](INFO): Thread cancelled.
2018-01-25T22:27:37.732Z,1516919257.732 [Supervisor](DEBUG): Uninitializing supervisor and starting cleanup.  Bye!
2018-01-25T22:27:37.733Z,1516919257.733 [CommandLine ThreadHandler](INFO): Thread cancelled.
2018-01-25T22:27:37.733Z,1516919257.733 [CommandLine](INFO): Join timeout helper Thread ID is 7324
2018-01-25T22:27:37.734Z,1516919257.734 [ComponentRegistry](INFO): Shutting down NavChartDb ThreadHandler
2018-01-25T22:27:37.734Z,1516919257.734 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2018-01-25T22:27:37.734Z,1516919257.734 [NavChartDb](INFO): Join timeout helper Thread ID is 7325
2018-01-25T22:27:37.981Z,1516919257.981 [NavChartDb ThreadHandler](INFO): Uninitializing protected caller thread.
2018-01-25T22:27:37.981Z,1516919257.981 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2018-01-25T22:27:37.982Z,1516919257.982 [ComponentRegistry](INFO): Shutting down Radio_Surface ThreadHandler
2018-01-25T22:27:37.982Z,1516919257.982 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2018-01-25T22:27:37.982Z,1516919257.982 [Radio_Surface](INFO): Join timeout helper Thread ID is 7326
2018-01-25T22:27:37.989Z,1516919257.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-01-25T22:27:37.990Z,1516919257.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-25T22:27:38.097Z,1516919258.097 [Radio_Surface ThreadHandler](INFO): Uninitializing protected caller thread.
2018-01-25T22:27:38.097Z,1516919258.097 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2018-01-25T22:27:38.109Z,1516919258.109 [ComponentRegistry](INFO): Shutting down WetLabsBB2FL ThreadHandler
2018-01-25T22:27:38.109Z,1516919258.109 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled.
2018-01-25T22:27:38.109Z,1516919258.109 [WetLabsBB2FL](INFO): Join timeout helper Thread ID is 7327
2018-01-25T22:27:38.117Z,1516919258.117 [WetLabsBB2FL ThreadHandler](INFO): Uninitializing protected caller thread.
2018-01-25T22:27:38.117Z,1516919258.117 [WetLabsBB2FL](INFO): Powering down
2018-01-25T22:27:38.118Z,1516919258.118 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled.
2018-01-25T22:27:38.129Z,1516919258.129 [ComponentRegistry](INFO): Shutting down CTD_Seabird ThreadHandler
2018-01-25T22:27:38.129Z,1516919258.129 [CTD_Seabird ThreadHandler](INFO): Thread cancelled.
2018-01-25T22:27:38.129Z,1516919258.129 [CTD_Seabird](INFO): Join timeout helper Thread ID is 7328
2018-01-25T22:27:38.189Z,1516919258.189 [CTD_Seabird ThreadHandler](INFO): Uninitializing protected caller thread.
2018-01-25T22:27:38.278Z,1516919258.278 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface
2018-01-25T22:27:38.278Z,1516919258.278 [CTD_Seabird](INFO): Powering down
2018-01-25T22:27:38.279Z,1516919258.279 [CTD_Seabird ThreadHandler](INFO): Thread cancelled.
2018-01-25T22:27:38.290Z,1516919258.290 [ComponentRegistry](INFO): Shutting down logger ThreadHandler
2018-01-25T22:27:38.290Z,1516919258.290 [logger ThreadHandler](INFO): Thread cancelled.
2018-01-25T22:27:38.290Z,1516919258.290 [logger](INFO): Join timeout helper Thread ID is 7330
2018-01-25T22:27:38.305Z,1516919258.305 [logger ThreadHandler](INFO): Uninitializing protected caller thread.
2018-01-25T22:27:38.305Z,1516919258.305 [logger ThreadHandler](INFO): Thread cancelled.
2018-01-25T22:27:38.309Z,1516919258.309 [ComponentRegistry](INFO): Shutting down CommandLine ThreadHandler
2018-01-25T22:27:38.310Z,1516919258.310 [CommandLine ThreadHandler](INFO): Thread cancelled.
2018-01-25T22:27:38.310Z,1516919258.310 [ComponentRegistry](INFO): Shutting down controlThread ThreadHandler
2018-01-25T22:27:38.310Z,1516919258.310 [controlThread ThreadHandler](INFO): Thread cancelled.
2018-01-25T22:27:38.310Z,1516919258.310 [controlThread](INFO): Join timeout helper Thread ID is 7331
2018-01-25T22:27:38.333Z,1516919258.333 [controlThread ThreadHandler](INFO): Uninitializing protected caller thread.
2018-01-25T22:27:38.333Z,1516919258.333 [controlThread](DEBUG): Uninitializing ControlThread
2018-01-25T22:27:38.334Z,1516919258.334 [Aanderaa_O2](INFO): Powering down
2018-01-25T22:27:38.335Z,1516919258.335 [NAL9602](INFO): Powering down
2018-01-25T22:27:38.336Z,1516919258.336 [DAT](INFO): Powering down
2018-01-25T22:27:38.457Z,1516919258.457 [PNI_TCM](INFO): Powering down
2018-01-25T22:27:38.545Z,1516919258.545 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2018-01-25T22:27:38.547Z,1516919258.547 [NavChart](DEBUG): Uninitialize NavChart Navigation.
2018-01-25T22:27:38.547Z,1516919258.547 [MissionManager](INFO): Uninitializing Mission Default
2018-01-25T22:27:38.548Z,1516919258.548 [Default] Stopped
2018-01-25T22:27:38.548Z,1516919258.548 [Default](DEBUG): Aggregate::uninitialize Default
2018-01-25T22:27:38.548Z,1516919258.548 [Default:B.GoToSurface] Stopped
2018-01-25T22:27:38.548Z,1516919258.548 [Default:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2018-01-25T22:27:38.548Z,1516919258.548 [Default:CheckIn] Stopped
2018-01-25T22:27:38.548Z,1516919258.548 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-25T22:27:38.548Z,1516919258.548 [Default:CheckIn:Read_GPS] Stopped
2018-01-25T22:27:38.552Z,1516919258.552 [VerticalControl](DEBUG): Uninitialize VerticalControlComponent.
2018-01-25T22:27:38.553Z,1516919258.553 [HorizontalControl](DEBUG): Uninitialize HorizontalControlComponent.
2018-01-25T22:27:38.553Z,1516919258.553 [SpeedControl](DEBUG): Uninitialize SpeedControlComponent.
2018-01-25T22:27:38.553Z,1516919258.553 [LoopControl](DEBUG): Uninitialize LoopControlComponent.
2018-01-25T22:27:38.554Z,1516919258.554 [BuoyancyServo](DEBUG): Uninitialize Buoyancy Servo.
2018-01-25T22:27:38.554Z,1516919258.554 [BuoyancyServo](INFO): Powering down
2018-01-25T22:27:38.569Z,1516919258.569 [ElevatorServo](DEBUG): Uninitialize Elevator Servo.
2018-01-25T22:27:38.569Z,1516919258.569 [ElevatorServo](INFO): Powering down
2018-01-25T22:27:38.570Z,1516919258.570 [MassServo](DEBUG): Uninitialize Mass Servo.
2018-01-25T22:27:38.570Z,1516919258.570 [MassServo](INFO): Powering down
2018-01-25T22:27:38.571Z,1516919258.571 [RudderServo](DEBUG): Uninitialize Rudder Servo.
2018-01-25T22:27:38.571Z,1516919258.571 [RudderServo](INFO): Powering down
2018-01-25T22:27:38.571Z,1516919258.571 [ThrusterServo](DEBUG): Uninitialize Thruster Servo.
2018-01-25T22:27:38.572Z,1516919258.572 [ThrusterServo](INFO): Powering down
2018-01-25T22:27:38.573Z,1516919258.573 [SBIT](DEBUG): Uninitialize SBIT Component.
2018-01-25T22:27:38.573Z,1516919258.573 [IBIT](DEBUG): Uninitialize IBIT Component.
2018-01-25T22:27:38.573Z,1516919258.573 [CBIT](DEBUG): Uninitialize CBIT Component.
2018-01-25T22:27:38.574Z,1516919258.574 [controlThread ThreadHandler](INFO): Thread cancelled.
2018-01-25T22:27:38.652Z,1516919258.652 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled.
2018-01-25T22:27:38.657Z,1516919258.657 [CTD_Seabird ThreadHandler](INFO): Thread cancelled.
2018-01-25T22:27:38.671Z,1516919258.671 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2018-01-25T22:27:38.710Z,1516919258.710 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2018-01-25T22:27:38.763Z,1516919258.763 [logger ThreadHandler](INFO): Thread cancelled.