//
// ctdDriver.cfg
//
// * This config file is normally used for CTD board 1.
// * Used this config file if 1 seabird tasks is used.
//
// Calibration constants TP4122 and CP2514
// For boardset #1 in ALTEX Science Payload
// 
// Updated with new sensor coefficients 24 July 2002 dg
// Swapped O2 sensor 25 Nov 03 dg 
// Updated with new sensor coefficients 10 Aug 2004 drthom
// Updated with new sensor coefficients 3 Jan 2004 dougie
// Updated with new sensor coefficients 3 May 2005 dougie
// Updated with new sensor coefficients 15 Aug 2005 drthom
// Updated with new sensor coefficients 27 AUg 2005 hthomas
// Updated with new sensor coefficients 24 Apr 2006 drthom
// Updated with new sensor coefficients 19 Sep 2006 dougie
// Updated with new sensor coefficients 28 Dec 2006 drthom
// Updated with new sensor coefficients 26 Jun 2007 dougie
// Updated with new sensor coefficients 19 Jun 2008 dougie
// Added CDOM fluorometer on voltage channel 5 15 Nov 2007 dc
// Updated with new sensor coefficients 18 Feb 2009 dougie


//TempSerialNumber = 4167; 
t_a = 3.68121772e-03;
t_b = 5.99511483e-04;
t_c = 1.56858499e-05;
t_d = 1.84835998e-06;
t_f0 = 2938.858;

//CondSerialNumber = ;
c_a = 5.78374723e-04;
c_b = 1.52048584e00;
c_c = -1.04826184e01;  
c_d = -8.44246300e-05;
c_m = 3.3;
eps = -9.57e-08;

//OxygenSerialNumber = 0461;
SOc = 0.4367;
BOc = 0.0000;
Voff = -0.5216;
TCor = -0.0004;
PCor = 1.350e-04;

//CDOMSerialNumber = FLCDMBA-812;
ScaleFactor = 50;
DarkCounts = 0.047;

NUMVOLTAGES = 6;
v1name = spare;
v2name = spare;
v3name = humidity; 
v4name = flow1;
v5name = CDOM;
v6name = dissolvedO2;

//whether or not the boardset needs the pressure sensor config cmds sent
PressureConfig = N;