//
// ctdDriver.cfg
//
// * This config file is normally used for CTD board 1.
// * Used this config file if 1 seabird tasks is used.
//
// Calibration constants TP4122 and CP2514
// For boardset #1 in ALTEX Science Payload
// 
// Updated with new sensor coefficients 24 July 2002 dg
// Swapped O2 sensor 25 Nov 03 dg 
// Updated with new sensor coefficients 10 Aug 2004 drthom
// Updated with new sensor coefficients 3 Jan 2004 dougie
// Updated with new sensor coefficients 3 May 2005 dougie
// Updated with new sensor coefficients 15 Aug 2005 drthom
// Updated with new sensor coefficients 27 AUg 2005 hthomas
// Updated with new sensor coefficients 24 Apr 2006 drthom
// Updated with new sensor coefficients 19 Sep 2006 dougie
// Updated with new sensor coefficients 28 Dec 2006 drthom
// Updated with new sensor coefficients 26 Jun 2007 dougie
// Updated with new sensor coefficients 19 Jun 2008 dougie
// Added CDOM fluorometer on voltage channel 5 15 Nov 2007 dc

//TempSerialNumber = 0849; 
t_a = 3.68121388e-03;
t_b = 6.00160844e-04;
t_c = 1.54463942e-05;
t_d = 2.75894483e-06;
t_f0 = 6277.843;

//CondSerialNumber = 0492;
c_a = 1.68338118e-06;
c_b = 4.42641429e-01;
c_c = -4.15549885e00;  
c_d = -7.99891971e-05;
c_m = 4.9;
eps = -9.57e-08;

//OxygenSerialNumber = 0564;
SOc = 0.4510;
BOc = 0.0000;
Voff = -0.5550;
TCor = 0.0007;
PCor = 1.350e-04;

//CDOMSerialNumber = FLCDMBA-812;
ScaleFactor = 50;
DarkCounts = 0.047;

NUMVOLTAGES = 6;
v1name = spare;
v2name = spare;
v3name = humidity; 
v4name = flow1;
v5name = CDOM;
v6name = dissolvedO2;

//whether or not the boardset needs the pressure sensor config cmds sent
PressureConfig = N;