//
// ctdDriver.cfg
//
// * This config file is normally used for CTD board 1.
// * Used this config file if 1 seabird tasks is used.
//
// Calibration constants TP4122 and CP2514
// For boardset #1 in ALTEX Science Payload
// 
// Updated with new sensor coefficients 24 July 2002 dg
// Swapped O2 sensor 25 Nov 03 dg 
// Updated with new sensor coefficients 10 Aug 2004 drthom
// Updated with new sensor coefficients 3 Jan 2004 dougie
// Updated with new sensor coefficients 3 May 2005 dougie
// Updated with new sensor coefficients 15 Aug 2005 drthom
// Updated with new sensor coefficients 27 AUg 2005 hthomas
// Updated with new sensor coefficients 24 Apr 2006 drthom
// Updated with new sensor coefficients 19 Sep 2006 dougie

//TempSerialNumber = 2813; 
t_a = 3.68121364e-03;
t_b = 6.02707036e-04;
t_c = 1.60167331e-05;
t_d = 2.12208223e-06;
t_f0 = 2793.212;

//CondSerialNumber = 2258;
c_a = 3.08360187e-21;
c_b = 1.56790312;
c_c = -1.06546397e01;  
c_d = 1.44280246e-05;
c_m = 22.5;
eps = -9.57e-08;

//OxygenSerialNumber = 0934;
SOc = 0.4478;
BOc = 0.000;
Voff = -0.4996;
TCor = 0.0005;
PCor = 1.350e-04;

NUMVOLTAGES = 6;
v1name = spare;
v2name = spare;
v3name = humidity; 
v4name = flow1;
v5name = OBS;
v6name = dissolvedO2;

//whether or not the boardset needs the pressure sensor config cmds sent
PressureConfig = N;