//
// ctdDriver.cfg
//
// * This config file is normally used for CTD board 1.
// * Used this config file if 1 seabird tasks is used.
//
// Calibration constants TP4122 and CP2514
// For boardset #1 in ALTEX Science Payload
// 
// Updated with new sensor coefficients 24 July 2002 dg
// Swapped O2 sensor 25 Nov 03 dg 
// Updated with new sensor coefficients 10 Aug 2004 drthom
// Updated with new sensor coefficients 3 Jan 2004 dougie
// Updated with new sensor coefficients 3 May 2005 dougie
// Updated with new sensor coefficients 15 Aug 2005 drthom
// Updated with new sensor coefficients 27 AUg 2005 hthomas

//TempSerialNumber = 0806; 
t_a = 3.68121567e-03;
t_b = 5.98603378e-04;
t_c = 1.50023304e-05;
t_d = 2.55711504e-06;
t_f0 = 5708.649;

//CondSerialNumber = 2478;
c_a = 4.45255980e-04;
c_b = 1.52082633;
c_c = -1.04823324e1;
c_d = -8.74108875e-5;
c_m = 3.4;
eps = -9.57e-08;

//OxygenSerialNumber =0115;
SOc = 0.3708;
BOc = 0.000;
Voff = -0.6308;
TCor = 0.0004;
PCor = 1.350e-04;

NUMVOLTAGES = 6;
v1name = spare;
v2name = spare;
v3name = humidity; 
v4name = flow1;
v5name = OBS;
v6name = dissolvedO2;

//whether or not the boardset needs the pressure sensor config cmds sent
PressureConfig = N;